Re: [OmniOS-discuss] manteinance mode
OK . The BE with errors still with errors . The new BE, after trying to import the pool with missing log device, is working . So, I will change the default BE . Like all others msg with this error in all forums, this problem have no solution . To finish it, someone can direct me to a doc about how to change default BE ? Thanks everyone Fábio Rabelo 2017-08-21 7:44 GMT-03:00 Fábio Rabelo : > just realised, the pool are health, but the log drive shows missing ! > > Can it be the problem ? > > Wil try to deatach it . > > > And : > >> The only thing I can think of is ... did you refresh the active service >> manifest? >> >> e.g. >> >> svcadm refresh boot-archive:default > > > no effect . > > > Fábio Rabelo > > > > -- Forwarded message -- > From: Hugh McIntyre > Date: 2017-08-21 3:20 GMT-03:00 > Subject: Re: [OmniOS-discuss] manteinance mode > To: Fábio Rabelo > > > Sorry, I can't reliably help beyond this. You should probably post > back to the Illumos or OmniOS lists. > > There are a few on-line search results matching your error, for example: > > https://openindiana.org/pipermail/openindiana-discuss/2012-May/008038.html > >- From 2012: attempts to increase timeout > (may fix your issue but doubtful) > > https://community.oracle.com/thread/3764402?tstart=0 > >- Suggests you changed some configuration which broke things. >- Maybe broken vfstab, or some other config change > > http://www.unix.com/solaris/155331-system-stuck-up-maintanence-mode.html > >- Similar config change >- This suggests to rebuild the boot archive. But not sure > this is safe unless you understand the error > > Hugh. > > > > > On 8/20/17 6:27 PM, Fábio Rabelo wrote: >> >> I rebooted the system, and now the file has a content . >> >> In the attachment >> >> sorry the jpeg, the system do not allow ssh connection, I cannot cut >> and paste anything . >> >> Fábio Rabelo >> >> 2017-08-20 22:19 GMT-03:00 Hugh McIntyre : >>> >>> OK, then probably /var/svc/log/system-boot-archive. >>> >>> Essentially, /var/svc/log should contain logs for the services, hopefully >>> including the reason for any errors. The only exception should be early in >>> the boot process if the root FS is not mounted read/write. >>> >>> I'm not sure why you're seeing the error you are seeing unless there is some >>> other console message referring to a hardware timeout before the svc.startd >>> message below? >>> >>> Hugh. >>> >>> >>> >>> >>> On 8/20/17 5:52 PM, Fábio Rabelo wrote: >>>> >>>> >>>> thanks for you help >>>> >>>> But, the are no file with that name in the folder . >>>> >>>> files startting with boot are : >>>> >>>> system-boot-archive-update >>>> system-boot-archive >>>> system-boot-config >>>> system-initial-boot >>>> >>>> comand run where : >>>> >>>> ls |grep boot >>>> >>>> >>>> Fábio Rabelo >>>> >>>> 2017-08-20 20:39 GMT-03:00 Hugh McIntyre : >>>>> >>>>> >>>>> What does /var/svc/log/system-boot-archive:default.log say near the end? >>>>> >>>>> Hugh. >>>>> >>>>> >>>>> >>>>> On 8/20/17 4:28 PM, Fábio Rabelo wrote: >>>>>> >>>>>> >>>>>> >>>>>> hi to all >>>>>> >>>>>> A system, with 3 years on line, no issue at all, passed to a power >>>>>> failure today, and when it boots, I have several msg like this : >>>>>> >>>>>> svc.startd[10] : svc:/system/boot-archive:default: method or service >>>>>> exit timed out. killing contract 16. >>>>>> >>>>>> svcadm clear makes any difference ... >>>>>> >>>>>> any help, please !!! >>>>>> >>>>>> >>>>>> Fábio Rabelo >>>>>> ___ >>>>>> OmniOS-discuss mailing list >>>>>> OmniOS-discuss@lists.omniti.com >>>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>>> >>>>> ___ >>>>> OmniOS-discuss mailing list >>>>> OmniOS-discuss@lists.omniti.com >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: manteinance mode
just realised, the pool are health, but the log drive shows missing ! Can it be the problem ? Wil try to deatach it . And : > The only thing I can think of is ... did you refresh the active service > manifest? > > e.g. > > svcadm refresh boot-archive:default no effect . Fábio Rabelo -- Forwarded message -- From: Hugh McIntyre Date: 2017-08-21 3:20 GMT-03:00 Subject: Re: [OmniOS-discuss] manteinance mode To: Fábio Rabelo Sorry, I can't reliably help beyond this. You should probably post back to the Illumos or OmniOS lists. There are a few on-line search results matching your error, for example: https://openindiana.org/pipermail/openindiana-discuss/2012-May/008038.html - From 2012: attempts to increase timeout (may fix your issue but doubtful) https://community.oracle.com/thread/3764402?tstart=0 - Suggests you changed some configuration which broke things. - Maybe broken vfstab, or some other config change http://www.unix.com/solaris/155331-system-stuck-up-maintanence-mode.html - Similar config change - This suggests to rebuild the boot archive. But not sure this is safe unless you understand the error Hugh. On 8/20/17 6:27 PM, Fábio Rabelo wrote: > > I rebooted the system, and now the file has a content . > > In the attachment > > sorry the jpeg, the system do not allow ssh connection, I cannot cut > and paste anything . > > Fábio Rabelo > > 2017-08-20 22:19 GMT-03:00 Hugh McIntyre : >> >> OK, then probably /var/svc/log/system-boot-archive. >> >> Essentially, /var/svc/log should contain logs for the services, hopefully >> including the reason for any errors. The only exception should be early in >> the boot process if the root FS is not mounted read/write. >> >> I'm not sure why you're seeing the error you are seeing unless there is some >> other console message referring to a hardware timeout before the svc.startd >> message below? >> >> Hugh. >> >> >> >> >> On 8/20/17 5:52 PM, Fábio Rabelo wrote: >>> >>> >>> thanks for you help >>> >>> But, the are no file with that name in the folder . >>> >>> files startting with boot are : >>> >>> system-boot-archive-update >>> system-boot-archive >>> system-boot-config >>> system-initial-boot >>> >>> comand run where : >>> >>> ls |grep boot >>> >>> >>> Fábio Rabelo >>> >>> 2017-08-20 20:39 GMT-03:00 Hugh McIntyre : >>>> >>>> >>>> What does /var/svc/log/system-boot-archive:default.log say near the end? >>>> >>>> Hugh. >>>> >>>> >>>> >>>> On 8/20/17 4:28 PM, Fábio Rabelo wrote: >>>>> >>>>> >>>>> >>>>> hi to all >>>>> >>>>> A system, with 3 years on line, no issue at all, passed to a power >>>>> failure today, and when it boots, I have several msg like this : >>>>> >>>>> svc.startd[10] : svc:/system/boot-archive:default: method or service >>>>> exit timed out. killing contract 16. >>>>> >>>>> svcadm clear makes any difference ... >>>>> >>>>> any help, please !!! >>>>> >>>>> >>>>> Fábio Rabelo >>>>> ___ >>>>> OmniOS-discuss mailing list >>>>> OmniOS-discuss@lists.omniti.com >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>> >>>> ___ >>>> OmniOS-discuss mailing list >>>> OmniOS-discuss@lists.omniti.com >>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: manteinance mode
sorry, just realise, msg are not beeing forward to forum Fábio Rabelo -- Forwarded message -- From: Fábio Rabelo Date: 2017-08-21 7:06 GMT-03:00 Subject: Re: [OmniOS-discuss] manteinance mode To: Hugh McIntyre Hi The first link I did not have found, will try . Links 2 and 3 allready tryed, no change . The thing is : nobody changed anything ! history : Electric company warns abou aoutage sunday moring system is shut down late saturday, no msg, no errors, nothing, power off with any event Sunday, late afternoon , system power up . errors ... There are another Solaris system in the same site, same instalation timeframe, no errors .. To sum to history, I created a new BE, tryed to import the pool, msg "no available pool to import" . In maitenance mode, it show pool mounted and health . Complete lost here Will try to change boot disk, install evething from scracth, and try impor pool again Fábio Rabelo 2017-08-21 3:20 GMT-03:00 Hugh McIntyre : > Sorry, I can't reliably help beyond this. You should probably post back to > the Illumos or OmniOS lists. > > There are a few on-line search results matching your error, for example: > > https://openindiana.org/pipermail/openindiana-discuss/2012-May/008038.html > >- From 2012: attempts to increase timeout > (may fix your issue but doubtful) > > https://community.oracle.com/thread/3764402?tstart=0 > >- Suggests you changed some configuration which broke things. >- Maybe broken vfstab, or some other config change > > http://www.unix.com/solaris/155331-system-stuck-up-maintanence-mode.html > >- Similar config change >- This suggests to rebuild the boot archive. But not sure > this is safe unless you understand the error > > Hugh. > > > > > On 8/20/17 6:27 PM, Fábio Rabelo wrote: >> >> I rebooted the system, and now the file has a content . >> >> In the attachment >> >> sorry the jpeg, the system do not allow ssh connection, I cannot cut >> and paste anything . >> >> Fábio Rabelo >> >> 2017-08-20 22:19 GMT-03:00 Hugh McIntyre : >>> >>> OK, then probably /var/svc/log/system-boot-archive. >>> >>> Essentially, /var/svc/log should contain logs for the services, hopefully >>> including the reason for any errors. The only exception should be early >>> in >>> the boot process if the root FS is not mounted read/write. >>> >>> I'm not sure why you're seeing the error you are seeing unless there is >>> some >>> other console message referring to a hardware timeout before the >>> svc.startd >>> message below? >>> >>> Hugh. >>> >>> >>> >>> >>> On 8/20/17 5:52 PM, Fábio Rabelo wrote: >>>> >>>> >>>> thanks for you help >>>> >>>> But, the are no file with that name in the folder . >>>> >>>> files startting with boot are : >>>> >>>> system-boot-archive-update >>>> system-boot-archive >>>> system-boot-config >>>> system-initial-boot >>>> >>>> comand run where : >>>> >>>> ls |grep boot >>>> >>>> >>>> Fábio Rabelo >>>> >>>> 2017-08-20 20:39 GMT-03:00 Hugh McIntyre : >>>>> >>>>> >>>>> What does /var/svc/log/system-boot-archive:default.log say near the >>>>> end? >>>>> >>>>> Hugh. >>>>> >>>>> >>>>> >>>>> On 8/20/17 4:28 PM, Fábio Rabelo wrote: >>>>>> >>>>>> >>>>>> >>>>>> hi to all >>>>>> >>>>>> A system, with 3 years on line, no issue at all, passed to a power >>>>>> failure today, and when it boots, I have several msg like this : >>>>>> >>>>>> svc.startd[10] : svc:/system/boot-archive:default: method or service >>>>>> exit timed out. killing contract 16. >>>>>> >>>>>> svcadm clear makes any difference ... >>>>>> >>>>>> any help, please !!! >>>>>> >>>>>> >>>>>> Fábio Rabelo >>>>>> ___ >>>>>> OmniOS-discuss mailing list >>>>>> OmniOS-discuss@lists.omniti.com >>>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss >>>>>> >>>>> ___ >>>>> OmniOS-discuss mailing list >>>>> OmniOS-discuss@lists.omniti.com >>>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] manteinance mode
hi to all A system, with 3 years on line, no issue at all, passed to a power failure today, and when it boots, I have several msg like this : svc.startd[10] : svc:/system/boot-archive:default: method or service exit timed out. killing contract 16. svcadm clear makes any difference ... any help, please !!! Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] new boot environment
Hi to all There are a way to force the creation of a new boot environment ? Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Bloody update for May 8th (r151022-RC0 feeder)
WOW Great news !!! Solar Flare 10G network cards are fully supported now :?!? Fábio Rabelo 2017-05-08 16:34 GMT-03:00 Dan McDonald : > I've updated bloody, and install media, today. > > illumos-omnios is at d2ed2f2489, omnios-build is at b902717c6dc, both master > branches. > > A few merges from upstream illumos, a few small LX fixes from Joyent, and a > bump of Mozilla-NSS to 3.30.2. > > This master branch has been merged into r151022 branches, and will provide > the basis for the last batch of install and upgrade tests. Users who are > looking for insights into r151022 should go check the in-progress release > notes: > > http://omnios.omniti.com/wiki.php/ReleaseNotes/r151022 > > There are new, r151022-related, pages you can visit from the above. The > UPGRADE INSTRUCTIONS should be read carefully, ESPECIALLY by r151014 users, > and by anyone with "ipkg" (non-linked-image, native) zones. Note that even > now, some of those pages may change more before 022 hits the servers. > > Thank you! > Dan > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] SMB and Netatalk
Hi to all There are someone with experience in running SMB and/or Netatalk over OmniOS ? Works OK ? Some caveats to avoid ? The possible scenario would be a server to hold Audio and Video files in a Video/Audio editing facility, with 10 GB network in/out, and 12 8 TB hard disks in Raid Z2, 2 256GB SSD to ZIL, no ARC, 128 GB RAM . Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: Install on Supermicro DOM=low space left
sorry, I forgot to change address to all list before send ... -- Forwarded message -- From: Fábio Rabelo Date: 2017-01-26 9:21 GMT-02:00 Subject: Re: [OmniOS-discuss] Install on Supermicro DOM=low space left To: "Volker A. Brandt" 2017-01-26 9:06 GMT-02:00 Volker A. Brandt : > Hi Fábio! > > >> I've just installed OmniOS on a Supermicro Motherboard with a DOM >> device for boot . >> >> It is working fine, no issues ... >> >> But, the 64GB DOM has just 9GB of space left >> >> Can I delete something ( temp files, compacted installed packages, etc >> ) to free some space ? > > You might have oversized swap and/or dump volumes. Do a > > zfs list -t volume > > What volume sizes are shown NAME USED AVAIL REFER MOUNTPOINT rpool/dump 41.5G 9.15G 41.5G - rpool/swap 4.13G 13.0G 276M - I did not changed anything during instalation proccess, I've just accepted all defaults Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Install on Supermicro DOM=low space left
Hi to all I've just installed OmniOS on a Supermicro Motherboard with a DOM device for boot . It is working fine, no issues ... But, the 64GB DOM has just 9GB of space left Can I delete something ( temp files, compacted installed packages, etc ) to free some space ? I thing this 9GB free space may become an issue in the future . Thanks in advance for any help ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] ASMedia 1061
Hi to all I am sorry if this subject hass allready been here, but I cannot find anything, so : Are the Sata cards baesd on ASMedia ASM 1061 supported by OmniOS ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] ixgbe: breaking aggr on 10GbE X540-T2
Hi to all A question: This are the board you used ? https://www.supermicro.com/products/motherboard/Xeon/C600/X10DRi-T4_.cfm If so, this board uses Intel X540, and this issue are only with Intel X550 chips ! Fábio Rabelo 2016-06-03 10:20 GMT-03:00 Stephan Budach : > Hi Dale, > > Am 17.05.16 um 20:55 schrieb Dale Ghent: > > On May 17, 2016, at 8:30 AM, Stephan Budach wrote: > > I have checked all of my ixgbe interfaces and they all report that now flow > controll is in place, as you can see: > > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe0 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe0 flowctrlrw no no no,tx,rx,bi > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe1 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe1 flowctrlrw no no no,tx,rx,bi > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe2 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe2 flowctrlrw no no no,tx,rx,bi > root@zfsha01colt:/root# dladm show-linkprop -p flowctrl ixgbe3 > LINK PROPERTYPERM VALUE DEFAULTPOSSIBLE > ixgbe3 flowctrlrw no no no,tx,rx,bi > > I then checked the ports on the Nexus switches and found out, that they do > have outbound-flowcontrol enabled, but that is the case on any of those > Nexus ports, including those, where this issue doesn't exist. > > Optimally you would have flow control turned off on both sides, as the > switch still expects the ixgbe NIC to respond appropriately. To be honest, > the only time to use ethernet flow control is if you are operating the > interfaces for higher-level protocols which do not provide any sort of > direct flow control themselves, such as FCoE. If the vast majority of > traffic is TCP, leave it to the TCP stack to manage any local congestion on > the link. > > /dale > > I just wanted to wrap this up… I recently swapped that old Sun server with a > new Supermicro X10-type, which has 4 10 GbE NICs on board, installed OmniOS > r018 and my RSF-1 cluster software on it. Configured my two LACP > aggregations and there hasn't been any issue since. > So, either it's something on the old server - it's a Sun Fire X4170M2 - or > something on the Intel cards. > > Cheers, > Stephan > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] performance extrremely low from nothing !
Thanks everyone ... Turns out the issue was Hard Disks ! All of them ! This system belongs to a mining company, and in the last month they made several deep explosions . Even some windows glasses have been blown out, and nobody cared to say that to me ... Problem solved . System will need to be rebuild from scratch using backups . Very "enjoyable" 2 or 3 days of work ahead ... Thanks everyone again ... Fábio Rabelo 2016-05-24 23:04 GMT-03:00 Bob Friesenhahn : > On Tue, 24 May 2016, Dirk-Jan Wemmers wrote: > >> Hi Fabio, >> >> is your pool (or one of your individual vdev’s) almost full? ZFS >> performance can take quite a nosedive when it fills up above say 80%. > > > Also, deduplication can cause a precipitous nose-dive in performance if it > is enabled, enough data is written, and there is not enough memory. > > Bob > -- > Bob Friesenhahn > bfrie...@simple.dallas.tx.us, http://www.simplesystems.org/users/bfriesen/ > GraphicsMagick Maintainer,http://www.GraphicsMagick.org/ > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] performance extrremely low from nothing !
Competely lost here ... Found what command replaced the "zfs_vdev_max_pending" , and it make no difference ! First, I added this command to /etc/system : set zfs:zfs_vdev_max_active = 1 make no diference, then added all this parameters : set zfs:zfs_vdev_async_read_max_active = 3 set zfs:zfs_vdev_async_read_min_active = 1 set zfs:zfs_vdev_async_write_max_active = 11 set zfs:zfs_vdev_async_write_min_active = 1 set zfs:zfs_vdev_max_active = 1 set zfs:zfs_vdev_scrub_max_active = 2 set zfs:zfs_vdev_scrub_min_active = 1 set zfs:zfs_vdev_sync_read_max_active = 10 set zfs:zfs_vdev_sync_read_min_active = 10 set zfs:zfs_vdev_sync_write_max_active = 1 set zfs:zfs_vdev_sync_write_min_active = 1 set zfs:zfs_vdev_async_write_active_max_dirty_percent = 60 set zfs:zfs_vdev_async_write_active_min_dirty_percent = 30 no diference either ... Yes. I rebooted the machine for the first and the second try . Someone has any clue ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] performance extrremely low from nothing !
answering to myself : The disks in this system are all Western Digital, I may be in this issue : http://letsgetdugg.com/2009/10/21/zfs-slow-performance-fix/ But the module does not accept this command ( zfs_vdev_max_pending is not defined ) so, how can solve this issue ?? Fábio Rabelo 2016-05-24 10:10 GMT-03:00 Fábio Rabelo : > Hi to all > > Got something here, and I have no idea what it can be ! > > Supermicro motherboard and chassis . > > LSI 2008 with IT firmware . > > Evething was working fine till yesterday . > > 2 years and a half ! > > Then, the performance goes terrible down . > > read/white from 5 to 8 MB/s sinse day one . > > Now is is in the Kb !!! > > none of the hard disks shows any error or warning . > > smart OK in all . > > I cannot find anything wrong, but there are something ... > > How can I figure it out ?? > > > Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] performance extrremely low from nothing !
Hi to all Got something here, and I have no idea what it can be ! Supermicro motherboard and chassis . LSI 2008 with IT firmware . Evething was working fine till yesterday . 2 years and a half ! Then, the performance goes terrible down . read/white from 5 to 8 MB/s sinse day one . Now is is in the Kb !!! none of the hard disks shows any error or warning . smart OK in all . I cannot find anything wrong, but there are something ... How can I figure it out ?? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI3108
Hi to all ... You may need to flash the IT firmware : http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads Fábio Rabelo 2016-05-23 16:19 GMT-03:00 Richard Skelton : > Hi, > I have SAS 9305-24i Host Bus Adapter but it not seen by OmniOS > Which driver should it use? Can it be configured? > Also the Intel X520-DA2 and the onboard X540 are also not recognised. > Both should use the ixgbe drive ? > What information do you need to add to a OmniOS r15018 system. > > > Dan McDonald wrote: > > On Mar 3, 2016, at 1:46 PM, Fábio Rabelo wrote: > > > I have a customer who wants to build a pure SSD Storage with Sandisk > 12 Gb/s SAS interface ! > > > Get an LSI 3008-based card. The 9300, for example. > > Dan > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI3108
I am a long time user of the IBM 1015 .. Problem : I have a customer who wants to build a pure SSD Storage with Sandisk 12 Gb/s SAS interface ! Is will run several SQL VMs in it to replace an aging SUN Server . Capicce ?? I do not have a choice to use 6 Gb/s HBAs ... Thanks ... Fábio Rabelo 2016-03-03 13:06 GMT-03:00 Andy Fiddaman : > > On Thu, 3 Mar 2016, Dan McDonald wrote: > > ; > ; > On Mar 3, 2016, at 9:17 AM, Martin Dojcak wrote: > ; > > ; > Hi, > ; > > ; > look at illumos Hardware Compatibility List: > ; > > ; > http://illumos.org/hcl/ > ; > > ; > there is support for LSI 3008 and 3108 hba > ; > ; Note that the 3108 is HW-RAID and uses the mr_sas(7D) driver, while 3008 > (with IT firmware) is a simpler HBA and uses the mpt_sas(7D) driver. > > We are running some Dell R730s with PERC H730s (using LSI 3108) in > pass-through mode with the mr_sas driver. No problems here but I'd still > recommend choosing something that works with mpt_sas as that has been > better maintained and is well tried and tested. > > reaper# (132) megacli -AdpAllInfo -a0 > ... > Versions > > Product Name: PERC H730 Mini > Serial No : 4CF00C5 > FW Package Build: 25.2.2-0004 > ... > Direct PD Mapping: Yes > > dmesg: > > mr_sas0: 0x1000:0x5d 0x1028:0x1f49, irq:15 drv-ver:6.503.00.00ILLUMOS > mr_sas0: TBOLT device detected > mr_sas0: msi_enable = 1 > mr_sas0: enable_fp = 1 > mr_sas0: ctio_enable = 1 > mr_sas0 PCI Express-device: pci1028,1f49@0, mr_sas0 > mr_sas0 is /pci@0,0/pci8086,2f02@1/pci1028,1f49@0 > scsi: [ID 583861 kern.info] sd0 at mr_sas0: target 0 lun 1 > mr_sas0: Phys. device found: tgt 0 dtype 0: SEAGATE ST300MP0005 > scsi: [ID 583861 kern.info] sd1 at mr_sas0: target 1 lun 1 > mr_sas0: Phys. device found: tgt 1 dtype 0: SEAGATE ST300MP0005 > ... > > > -- > Citrus IT Limited | +44 (0)870 199 8000 | enquir...@citrus-it.co.uk > Rock House Farm | Green Moor | Wortley | Sheffield | S35 7DQ > Registered in England and Wales | Company number 4899123 > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI3108
OK, reading the manual for the controller ... I do not found anything like "passthru" What I did found was a fuction called "expose Hard Disk to Host" ... And, looks like is is what I need Coming back when I have the card in my hands ... Thanks again Fábio Rabelo 2016-03-03 12:31 GMT-03:00 Fábio Rabelo : > OK .. > > So, I have to try it out at my own chance and risk ... > > Not today, but soon ... > > Thanks > > > Fábio Rabelo > > 2016-03-03 12:25 GMT-03:00 Dan McDonald : > >> >> > On Mar 3, 2016, at 10:21 AM, Fábio Rabelo >> wrote: >> > >> > >> > If 3108 are RAID, I still can configure my "tipical" RAID Z3 using >> each Hard Disk individualy ? >> > >> > Or OmniOS will only "see" the RAID array ? >> >> You'll have to use the MegaRAID BIOS crud to configure it to not HW-RAID >> the drives. Some of these let you have "passthru" which presents the raw >> SCSI device up to the OS. This is ideal. Older ones (e.g. 2108) would >> only let you create HW-RAID groups of one disk. This adds a layer of >> HW-RAID crap even though it's still a single drive. >> >> I know the 2208 would let you passthru. I've never tried a 3108 board, >> but I hope it's sane like the 2208. >> >> Dan >> >> > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LSI3108
Hi to all I just did a try in google to find if recent LSI3108 are supported in OmniOS, but did not find anuthing .. Someone knows the answer ? Recent SAS 12 GB/s LSI 3008 and 3108 works with OmniOS ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Xeon SOC with 10 GB net card
Hi to all Someone knows if the 10 GB network ports in this litle baby works with OmniOS ? http://www.supermicro.com/products/motherboard/Xeon/D/X10SDV-8C-TLN4F.cfm Yes, I am dreaming with a very compact pure SSD storage ;- )) With one 8 port SAS in the PCIe slot, plus 4 Sata 3 ports in the motherboard, with a DOM module to boot the system and the remainig Sata 3 to ZIL device Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Fwd: All SSD pool advice
And no expander ;- ))) I use 3 IBM SAS1015 flashed to IT, the only quality SAS controller with afordable price that I can find here in Brasil . Fábio Rabelo 2015-04-07 11:38 GMT-03:00 Chris Nagele : > That helps a lot. That SC216BA-R1K28LPB chassis looks really nice, > especially the two extra bays in the back for the rpool. > > Thanks everyone! > > Chris Nagele > Co-founder, Wildbit > Beanstalk, Postmark, dploy.io > > > On Mon, Apr 6, 2015 at 10:04 AM, Schweiss, Chip > wrote: > > > > On Mon, Apr 6, 2015 at 8:53 AM, Fábio Rabelo > > wrote: > >> > >> Sorry, forget to forward to the list ... > >> > >> > >> -- Forwarded message -- > >> From: Fábio Rabelo > >> Date: 2015-04-06 10:51 GMT-03:00 > >> Subject: Re: [OmniOS-discuss] All SSD pool advice > >> To: Chris Nagele > >> > >> > >> I never get my hands at that 4U model ... > >> > >> I have 2 of this babys in a customer of mine : > >> > >> http://www.supermicro.com/products/chassis/2U/216/SC216BA-R1K28LP.cfm > >> > >> Each one with 24 1TB Samsung 850PRO for a litle over an year, > >> OminOS+Napp-it , no issue whatsoever ... > >> > >> Expanded Chassis brings me lots and lots of headaches ... > > > > > > The system I've built with interposers has SAS expanders and gives me no > > problems. Samsung SSDs are the only SSD I've found that works well with > the > > interposer. > > > > -Chip > >> > >> > >> > >> Fábio Rabelo > >> > >> 2015-04-06 10:41 GMT-03:00 Chris Nagele : > >> > >>> Thanks everyone. Regarding the expanders, our 4U servers are on the > >>> following chassis: > >>> > >>> http://www.supermicro.com/products/chassis/4U/846/SC846E16-R1200.cfm > >>> > >>> We are using all SAS disks, except for the SSDs. How big is the risk > >>> here when it comes to SAS -> SATA conversion? Our newer servers have > >>> direct connections on each lane to the disk. > >>> > >>> Chris > >>> > >>> Chris Nagele > >>> Co-founder, Wildbit > >>> Beanstalk, Postmark, dploy.io > >>> > >>> > >>> On Sat, Apr 4, 2015 at 7:18 PM, Doug Hughes wrote: > >>> > > >>> > We have a couple of machines with all SSD pool (~6-10 Samsung 850 pro > >>> > is the > >>> > current favorite). They work great for IOPS. Here's my take. > >>> > 1) you don't need a dedicated zil. Just let the zpool intersperse it > >>> > amongst > >>> > the existing zpool devices. They are plenty fast enough. > >>> > 2) you don't need an L2arc for the same reason. a smaller number of > >>> > dedicated devices would likely cause more of a bottleneck than > serving > >>> > off > >>> > the existing pool devices (unless you were to put it on one of those > >>> > giant > >>> > RDRAM things or similar, but that adds a lot of expense) > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > On 4/4/2015 3:07 PM, Chris Nagele wrote: > >>> > > >>> > We've been running a few 4U Supermicro servers using ZeusRAM for zil > >>> > and > >>> > SSDs for L2. The main disks are regular 1TB SAS. > >>> > > >>> > I'm considering moving to all SSD since the pricing has dropped so > >>> > much. > >>> > What things should I know or do when moving to all SSD pools? I'm > >>> > assuming I > >>> > don't need L2 and that I should keep the ZeusRAM. Should I only use > >>> > certain > >>> > types of SSDs? > >>> > > >>> > Thanks, > >>> > Chris > >>> > > >>> > > >>> > -- > >>> > > >>> > Chris Nagele > >>> > Co-founder, Wildbit > >>> > Beanstalk, Postmark, dploy.io > >>> > > >>> > > >>> > > >>> > ___ > >>> > OmniOS-discuss mailing list > >>> > OmniOS-discuss@lists.omniti.com > >>> > http://lists.omniti.com/mailman/listinfo/omnios-discuss > >>> > > >>> > > >>> > > >>> > ___ > >>> > OmniOS-discuss mailing list > >>> > OmniOS-discuss@lists.omniti.com > >>> > http://lists.omniti.com/mailman/listinfo/omnios-discuss > >>> > > >>> ___ > >>> OmniOS-discuss mailing list > >>> OmniOS-discuss@lists.omniti.com > >>> http://lists.omniti.com/mailman/listinfo/omnios-discuss > >> > >> > >> > >> > >> ___ > >> OmniOS-discuss mailing list > >> OmniOS-discuss@lists.omniti.com > >> http://lists.omniti.com/mailman/listinfo/omnios-discuss > >> > > > > > > ___ > > OmniOS-discuss mailing list > > OmniOS-discuss@lists.omniti.com > > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: All SSD pool advice
Sorry, forget to forward to the list ... -- Forwarded message -- From: Fábio Rabelo Date: 2015-04-06 10:51 GMT-03:00 Subject: Re: [OmniOS-discuss] All SSD pool advice To: Chris Nagele I never get my hands at that 4U model ... I have 2 of this babys in a customer of mine : http://www.supermicro.com/products/chassis/2U/216/SC216BA-R1K28LP.cfm Each one with 24 1TB Samsung 850PRO for a litle over an year, OminOS+Napp-it , no issue whatsoever ... Expanded Chassis brings me lots and lots of headaches ... Fábio Rabelo 2015-04-06 10:41 GMT-03:00 Chris Nagele : Thanks everyone. Regarding the expanders, our 4U servers are on the > following chassis: > > http://www.supermicro.com/products/chassis/4U/846/SC846E16-R1200.cfm > > We are using all SAS disks, except for the SSDs. How big is the risk > here when it comes to SAS -> SATA conversion? Our newer servers have > direct connections on each lane to the disk. > > Chris > > Chris Nagele > Co-founder, Wildbit > Beanstalk, Postmark, dploy.io > > > On Sat, Apr 4, 2015 at 7:18 PM, Doug Hughes wrote: > > > > We have a couple of machines with all SSD pool (~6-10 Samsung 850 pro is > the > > current favorite). They work great for IOPS. Here's my take. > > 1) you don't need a dedicated zil. Just let the zpool intersperse it > amongst > > the existing zpool devices. They are plenty fast enough. > > 2) you don't need an L2arc for the same reason. a smaller number of > > dedicated devices would likely cause more of a bottleneck than serving > off > > the existing pool devices (unless you were to put it on one of those > giant > > RDRAM things or similar, but that adds a lot of expense) > > > > > > > > > > > > On 4/4/2015 3:07 PM, Chris Nagele wrote: > > > > We've been running a few 4U Supermicro servers using ZeusRAM for zil and > > SSDs for L2. The main disks are regular 1TB SAS. > > > > I'm considering moving to all SSD since the pricing has dropped so much. > > What things should I know or do when moving to all SSD pools? I'm > assuming I > > don't need L2 and that I should keep the ZeusRAM. Should I only use > certain > > types of SSDs? > > > > Thanks, > > Chris > > > > > > -- > > > > Chris Nagele > > Co-founder, Wildbit > > Beanstalk, Postmark, dploy.io > > > > > > > > ___ > > OmniOS-discuss mailing list > > OmniOS-discuss@lists.omniti.com > > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > > > > > > ___ > > OmniOS-discuss mailing list > > OmniOS-discuss@lists.omniti.com > > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] 6TB HDs
Hi to all In a new system, will be used just 6 TB Hard Discs, with LSI controlers, no expander whasoever . WD RED, TQ chassis from supermicro . I need to set Ashift to 12, or the Omni will do it automatically ? Thanks in advance ... ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Marvel based 10 GB network card
Hi to all Someone knows if this new 10 GB cards : http://www.startech.com/Networking-IO/Adapter-Cards/10gb-pcie-nic~ST1SPEX are, or will be supported in OmniOS ? They are incredibly afordable Works with linux, with very good performance ! Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] list of know-compatible motherboards?
I can show you what motherboards I have installed and fully working in the customers of mine : http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DG6-F.cfm http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DG6.cfm http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DGi-F.cfm http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DGi.cfm http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8SGL-F.cfm http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8SGL.cfm The ones with LSI SAS controler needs to be flashed with IT firmware, you can find them in the official Supermicro FTP site : ftp://ftp.supermicro.com/Driver/SAS/LSI/ Opterons from 8 to 24 cores, no issue whats soever ... Some of them are up and running for over an year !!! Fábio Rabelo 2014-11-19 21:35 GMT-02:00 Joseph Boren : > Is anyone aware of a list, even a short list, of motherboards that are > known to be compatible with OmniOS? The illumos HCL doesn't list any > motherboards. > > Thanks, > > -jb- > *Joseph Boren* > > IT Specialist > *DRAKE COOPER* > + c: (208) 891-2128 + o: (208) 342-0925 > + 416 S. 8th St., Boise, ID 83702 > + w: drakecooper.com + f: /drakecooper <http://facebook.com/drakecooper> + > t: @drakecooper <http://twitter.com/drakecooper> > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] napp-it forum ?
Anyone knows a forum about nnap-it ? I cannot found anything in the site Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] replace disk with difrferent model/size
Thanks a lot ! This user intent to replace the entire pool, so it is the best to change it . But I have no idea what I have to do so ... Point me to a doc with this info and I will read and apply . Many thanks again Fábio Rabelo 2014-10-06 11:48 GMT-03:00 Schweiss, Chip : > Looks like you are trying to add a 4K disk to pool with ashift=9. > > If the disk is a 512e disk you can force it to ashift=9 by adding an entry > in sd.conf. This will degrade write performance. It's best to move the > whole pool to ashift=12 (4K sectors) or find a 512b native disk. > > -Chip > > On Mon, Oct 6, 2014 at 6:46 AM, Fábio Rabelo > wrote: > >> Hi to all >> >> I have a system with failed hard disk . >> >> When I try to replace it, after 3 to 5 seconds "thinking" the system >> returns a msg like >> >> geometry mismatch error >> >> So, how can I replace a failed disk with another model or size ? >> >> This system uses 2 TB Hard disks, at first, I've installed 4 TB one, >> after this geometry error I get a try with 2 TB model, same result . >> >> >> Fábio Rabelo >> ___ >> OmniOS-discuss mailing list >> OmniOS-discuss@lists.omniti.com >> http://lists.omniti.com/mailman/listinfo/omnios-discuss >> > > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] replace disk with difrferent model/size
Hi to all I have a system with failed hard disk . When I try to replace it, after 3 to 5 seconds "thinking" the system returns a msg like geometry mismatch error So, how can I replace a failed disk with another model or size ? This system uses 2 TB Hard disks, at first, I've installed 4 TB one, after this geometry error I get a try with 2 TB model, same result . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] how many HBAs my system have ?
pkg search sasinfo returns nothing ... pkg install sasinfo returns "no matching version of the system ... can be installed" Same with pfexec pkg install sasinfo cfgadm shows the boot disk, and the ZIL disk, but nothing in the HBAs ... But I know there are 16 hard disks connected to this system . Fábio Rabelo 2014-10-03 11:30 GMT-03:00 Dan Vatca : > I think sasinfo might not be installed by default. Try 'sudo pkg install > sasinfo'. It is part of the illumos kernel, so it must be present in omnios. > What version are you running? > > > > On Fri, Oct 3, 2014 at 4:25 PM, Fábio Rabelo > wrote: >> >> How can I check how many HBA controlres do I have connected in a >> system, if this system are in a ( very ) remote location, and I just >> have SSH available ? >> >> prtconf -v returns too many noise ! >> >> prtconv -v |grep RAID returns only one line ... >> >> There is an easy way ? >> >> >> Fábio Rabelo >> ___ >> OmniOS-discuss mailing list >> OmniOS-discuss@lists.omniti.com >> http://lists.omniti.com/mailman/listinfo/omnios-discuss > > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] how many HBAs my system have ?
Thanks for the tip ... Well, it would be my friend if it was present in my system : sasinfo: command not found Fábio Rabelo 2014-10-03 10:32 GMT-03:00 Bielicki, Michal : > sasinfo is your friend. > > Kind regards / > Grüße aus dem hohen Norden > > Michal Bielicki > > > <http://www.losstech.de/> > > > > <http://www.innovationspreis-it.de/> > Aktuelle Publikationen: <http://www.innovationspreis-it.de/> > www.losstech-blog.de > > > > losstech GmbH > Hauptstraße 24, DE-25355 Lutzhorn > > mailto:m...@losstech.de > +49 (0)4123 929900 (fon) > +49 (0)4123 929911 (fax) > > > Amtsgericht Pinneberg, HRB 5737 > USt-Id: DE 227 8636 32 > > Hamburger Sparkasse, KTO 1217 149 150, BLZ 200 505 50 > Sparkasse Südholstein, KTO 151 228 56, BLZ 230 510 30 > > *This message and any attachment is losstech proprietary and may be > privileged or otherwise protected from disclosure.* > *If you are not the intended recipient, please phone or email the sender > and delete this message and any attachment from your system.* > *If you are not the intended recipient you are not allowed to copy this > message or attachment or disclose the contents to any other person and have > to destroy all copies of the original message.* > > On 03 Oct 2014, at 15:25, Fábio Rabelo wrote: > > How can I check how many HBA controlres do I have connected in a > system, if this system are in a ( very ) remote location, and I just > have SSH available ? > > prtconf -v returns too many noise ! > > prtconv -v |grep RAID returns only one line ... > > There is an easy way ? > > > Fábio Rabelo > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] how many HBAs my system have ?
How can I check how many HBA controlres do I have connected in a system, if this system are in a ( very ) remote location, and I just have SSH available ? prtconf -v returns too many noise ! prtconv -v |grep RAID returns only one line ... There is an easy way ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] SATA SSD vs. SAS
Hi to all ... I live in Brazil, and here there are things that are VERY hard to find ! So, I need to be creative to get things done ... This as my experiences, till now : I Use Supermicro SATA backplanes ( the ones wirh "TQ" in the end of the part number ) with a mix of SATA and SAS disks without any kind of issue so far ... The only controller card I used till now are the IBM 1015 flashed to IT , and the breakout cables, one end are sff8087 and the other end have 4 SATA connectors . Systems are running fine for more then an year ... several Samsung and Sandisk SSDs for ZIL . But till now no pure SSD system . Fábio Rabelo 2014-09-29 17:10 GMT-03:00 Nate Smith : > Recently purchased a large number of 480GB datacenter grade SSDs with the > idea to make a ZPOOL for a VM infrastructure. After receiving, I realized > that they are SATA and not SAS, and that I'd completely overlooked that fact. > I was planning on using them in a DELL R720XD which only uses two SAS cables > for 24x2.5" disks. Since this backplane is obviously a SAS > expander/multiplier, it will probably lead to disastrous results with SATA > drives. Everything I've read says "don't use SAS expanders with SATA drives." > (not to mention, that I'll completely saturate the data paths with these). > In that vein, I've got a few questions. > > People choose SATA for SSD, because when it comes to SSD, the price may be > 4-10 times as much for SAS. I've seen lots of setups with SAS spinning disks > and SATA for L2ARC or ZIL. How are people connecting SATA disks for just > these tasks and avoiding problems? Straight onto the SATA port on the > motherboard? Are there any SATA only controllers that work well for SSD on > Omnios? > > Does anyone know of any JBODs that are expander/multiplier free that would > work for this setup? I have had a hard time finding any. > > Has anyone had any luck with interposers? I read this report, and it sounded > promising till I got to the end. > http://xnat.org/blog/xnat-hardware/rsf-1-high-availablity-ssd-pool-for-vm-storage-and-build-space/ > > Thanks in advance, > > -- > Nate Smith > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Fwd: Tips on diagnosing an OmniOS lockup?
+1 here . I had a similar issue, Supermicro Motherboard, originally with Kingston Memory, changed memory to Nanya, and this system are running smoothly for more than 8 mounts . Fábio Rabelo Sorry, I forgot to mention, memtest did not show any error with Kingston memory, but after the change to nanya, the lockups completely stops ! Fábio Rabelo 2014-09-19 4:13 GMT-03:00 Matthew Lagoe : > I would run memtest on the system I have had similar issues in the past with > bad ram/cpu/mobo > > Doesn't sound like a OS issue tbh > > -Original Message- > From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On > Behalf Of Chris Siebenmann > Sent: Thursday, September 18, 2014 11:04 PM > To: omnios-discuss@lists.omniti.com > Subject: [OmniOS-discuss] Tips on diagnosing an OmniOS lockup? > > We have a situation where one of our OmniOS NFS fileservers (running > r151010 although not current on updates) is hanging/locking up mysteriously > (other identical servers run fine). No messages are logged either to the > console or to syslog and the machine becomes almost totally unresponsive; at > best it pings, but input on the console is ignored and network services > (including NFS) no longer respond. > > Beyond 'use mdb -K so we can capture a crash dump the next time this > happens', do people have any suggestions for diagnosing the cause here? > > Thanks in advance. > > - cks > PS: if people want to know the hardware and setup details, this and > its links are a description of the systems: > http://utcc.utoronto.ca/~cks/space/blog/solaris/ZFSFileserverSetupII > The fileserver systems are not currently using the LSI SAS ports for > anything so I believe we should be unaffected by any OmniOS issues > there. > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Tips on diagnosing an OmniOS lockup?
+1 here . I had a similar issue, Supermicro Motherboard, originally with Kingston Memory, changed memory to Nanya, and this system are running smoothly for more than 8 mounts . Fábio Rabelo 2014-09-19 4:13 GMT-03:00 Matthew Lagoe : > I would run memtest on the system I have had similar issues in the past with > bad ram/cpu/mobo > > Doesn't sound like a OS issue tbh > > -Original Message- > From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On > Behalf Of Chris Siebenmann > Sent: Thursday, September 18, 2014 11:04 PM > To: omnios-discuss@lists.omniti.com > Subject: [OmniOS-discuss] Tips on diagnosing an OmniOS lockup? > > We have a situation where one of our OmniOS NFS fileservers (running > r151010 although not current on updates) is hanging/locking up mysteriously > (other identical servers run fine). No messages are logged either to the > console or to syslog and the machine becomes almost totally unresponsive; at > best it pings, but input on the console is ignored and network services > (including NFS) no longer respond. > > Beyond 'use mdb -K so we can capture a crash dump the next time this > happens', do people have any suggestions for diagnosing the cause here? > > Thanks in advance. > > - cks > PS: if people want to know the hardware and setup details, this and > its links are a description of the systems: > http://utcc.utoronto.ca/~cks/space/blog/solaris/ZFSFileserverSetupII > The fileserver systems are not currently using the LSI SAS ports for > anything so I believe we should be unaffected by any OmniOS issues > there. > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI SAS3041e-HP
Many thanks to all the people ... It is working now, but there is one more tip to share, use an OLD motherboard with good and old BIOS ! Do not try to flash this card in a recent UEFI motherboard or you will get some more headaches Thanks again my "home storage" are up and running, reports on performance and functionality later ... Fábio Rabelo 2014-08-27 14:47 GMT-03:00 Alexander Lesle : > Hello Fábio, > > first download on the LSI website: > http://www.lsi.com/support/pages/download-results.aspx?component=Storage+Component&productfamily=Legacy+Host+Bus+Adapters&productcode=P00056&assettype=Firmware&productname=LSI+SAS+3041E-R > this two files: > > SAS3041ER_ Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows > http://www.lsi.com/downloads/Public/Host%20Bus%20Adapters/Host%20Bus%20Adapters%20Common%20Files/SAS_SATA_3G_P21/SAS3041ER_%20Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows.zip > SASFlash Quick Reference Guide > http://www.lsi.com/downloads/Public/Obsolete/Obsolete%20Common%20Files/SASFlash_Ref_Guide.zip > > Unzip the first file and copy all the files not the folders on your > USB-Stick - in a new folder e.g. named "sas3041" not more than 8 > letters. > Boot to DOS, switch to c:\sas3041 and first I recommend to do > 'sasflash -list' and write down all infos about the card first. > You know now the Chip Version and the SAS Address. > > Now you can run the 'hbaFlash.bat', select CardType, PCIType, IT-Mode > and Chipversion. > The batch first flash the Firmware and here you get maybe a message that > the ProduktID an VendorID does not match. Type Y to flash anyway. > After flashing Firmware you MUST get the message "Firmware Flash > Successful" > the same with the second flash BIOS you MUST get the successfull > message too and "Finished Processing Commands Successfully". > You have done your card is now in IT-Mode and reflashed to LSI. > > When sasflash breaks and you cant flash the card because it is > branded to HP - you have to erase the card first. > Reboot than 'sasflash -o -e X' X=Parameter > I always use Parameter=6 when I want to reflash to a LSI card. > Do NOT reboot after erase - run the batch file and than set the > SAS Address with 'sasflash -o -sasadd 500x' (x= numbers for SAS address) > You have done. > > Check the driver - see Eric Sproul's recommendation yesterday. > If OmniOS use the driver mpt I would check it out > Parameter=7 to change to mpt_sas. > > Good luck. :) > > am Mittwoch, 27. August 2014 um 00:23 hat u.a. > in mid:caeeky64ws9my61ab3otsxdudtryc3dyjfj17zg1salxicqr...@mail.gmail.com > geschrieben: > >> So, how I can flash a 1064E-IR to became a 1064E-IT ? > -- > Mit freundlichem Gruss > Alexander > mailto:gro...@tierarzt-mueller.de > eMail geschrieben mit: The Bat! 5.8.8 > unter Windows 7 Pro Service Pack 1 > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] LSI SAS3041e-HP
Ok, some things I did not see at first .
After a long day trying to flash this card, I entered in it's own
utility, and ti identifies itself as SAS1064E-IR, even if all printed
ithe board says is is a 3041 .
So it is probably my issue
So, how I can flash a 1064E-IR to became a 1064E-IT ?
Thanks in advance all the tips and info ....
Fábio Rabelo
2014-08-23 12:23 GMT-03:00 Eric Sproul :
> That generation of LSI adapters (based on SAS1064/1068 controller
> chip) is supported by the legacy, closed-source "mpt" driver. Is the
> mpt driver attaching to the device at all? `modinfo | grep mpt`
>
> If not, you might try adding its PCI ID as another alias for mpt.
> You'd do that with update_drv(1M). Check `prtconf -d` to find the ID.
> If it is attaching, but the drives are not, it could well be a
> firmware issue. The "-HP" in the part name makes me suspicious that
> it could have a custom HP firmware, so re-flashing it with stock LSI
> firmware would be a good first step.
>
> Note that our mpt driver, being closed-source, will never see any
> further development. If you can get your hands on a SAS2 adapter,
> those are supported by the open-source (and still-developed)
> mpt_sas(7D). Good choices include those based on the SAS200{4,8} and
> SAS230{4,8}, as they can have the IT firmware. Avoid SAS210x because
> they are IR-only. The IBM M1015 is a popular version, based on the
> SAS2008 chip.
>
> Eric
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LSI SAS3041e-HP
Hi to all Finaly I got my hands in this card, an LSI SAS3041e-HP http://mlb-s1-p.mlstatic.com/lsi-3041e-hp-4-portas-pci-e-3gbs-sas-sata-2-raid-low-prof-16467-MLB20121375810_072014-O.jpg But Omni are not recognising any disk connected to it ! Linux does . So the card are working, its bios shows-up during boot . Must be Bios/firmware related . But I do not find anything in the "unraid" sites about this card . Someone knows where I can find bios/firmware for IT mode that can work on this card ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LSI 3041e
Hi to all Quick question about a 4 port Sata card : I have an HP branded LSI 3041 card with 4 Sata ports on it . I need to reflash it, or it are supported by OmniOS Out of the Box ? Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] OmniOS "bloody" repo has been updated
Just for clarification, this mpt-sas addresses LSI 2308 ? Anyway, it is great news thanks ... Fábio Rabelo 2014-07-23 11:22 GMT-03:00 Dan McDonald : > Hey everyone! > > Once again, I've updated the install media for this update as well as the IPS > repo. It's a big one, and includes one new device I'd *REALLY* like folks to > test upon. > > Broken down by category, what's new in this update? > > userspace > - zsh to 5.0.5. > - mandoc now in the man pages. > > headers > - POSIX 2008 locale support > > devices > - mpt_sas now supports 12G WOULD APPRECIATE TESTING > > zones > - virtualized load average for zones > - per-zone CPU kstats > > Files & sharing > - Several ZFS bugfixes and enhancements. > - rpcbind bugfix > - NLM bugfixes > > TCP/IP > - tcp_strong_iss defaults to 2. > - ipsec_policy_log_interval to 0. > > > Happy updating! > Dan > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] AHCI driver problem with ASM1062
I am not shore if I can help . The chip are not exactly the same, mine are ASM 1061, and I am not experiencing any error, but the only disk connected to this card are a Samsung 256GB SSD that are working as ZIL . During my research I found in several forums a warning about BIOS version, but all users saying it were from Windows world . Anyway, my card already comes with the up to date BIOS . And I did not saw anything about the ASM1062 chip, only about the ASM 1061 chip, so I do not know if the bios issue can apply to your case . Sorry if I cannot be more useful ... Fábio Rabelo 2014-07-13 6:07 GMT-03:00 Brogyányi József : > Hi > > I'm little bit sad because this card not working 100%. Some people can use > it without any error. My system is working with small files. > I think the AHCI driver is same as OmniTI. > When I want to copy a big file ( more than 1 GB) the system began to slow > and finally stop or waiting for a long time. > Fabio could you check your on your system this? The dd copy sometimes can > run with few error message then the speed is enough for any new HDD > (395MBps). > Now I don't know the card is bad or the AHCI driver not fit my system. > Thanks any help. I think the message contains lot information about this > error. > Here is my dmesg output: > > Jul 13 10:43:46 hipster Transport state transition error (T) > Jul 13 10:43:46 hipster ahci: [ID 657156 kern.warning] WARNING: ahci1: error > recovery for port 1 succeed > Jul 13 10:43:46 hipster ahci: [ID 777486 kern.warning] WARNING: ahci1: ahci > port 1 has interface fatal error > Jul 13 10:43:46 hipster ahci: [ID 687168 kern.warning] WARNING: ahci1: ahci > port 1 is trying to do error recovery > Jul 13 10:43:46 hipster ahci: [ID 551337 kern.warning] WARNING: ahci1: > Handshake Error (H) > Jul 13 10:43:46 hipster Transport state transition error (T) > Jul 13 10:43:47 hipster ahci: [ID 657156 kern.warning] WARNING: ahci1: error > recovery for port 1 succeed > Jul 13 10:44:44 hipster ahci: [ID 517647 kern.warning] WARNING: ahci1: > watchdog port 1 satapkt 0xff02d216e8d8 timed out > Jul 13 10:44:44 hipster ahci: [ID 777486 kern.warning] WARNING: ahci1: ahci > port 1 has interface fatal error > Jul 13 10:44:44 hipster ahci: [ID 687168 kern.warning] WARNING: ahci1: ahci > port 1 is trying to do error recovery > Jul 13 10:44:44 hipster ahci: [ID 551337 kern.warning] WARNING: ahci1: > Handshake Error (H) > Jul 13 10:44:44 hipster Transport state transition error (T) > Jul 13 10:44:45 hipster ahci: [ID 657156 kern.warning] WARNING: ahci1: error > recovery for port 1 succeed > Jul 13 10:44:45 hipster sata: [ID 801845 kern.info] > /pci@0,0/pci8086,8c14@1c,2/pci1b21,1060@0: > Jul 13 10:44:45 hipster SATA port 1 error > Jul 13 10:44:45 hipster sata: [ID 801845 kern.info] > /pci@0,0/pci8086,8c14@1c,2/pci1b21,1060@0: > Jul 13 10:44:45 hipster SATA port 1 error > Jul 13 10:44:45 hipster sata: [ID 801845 kern.info] > /pci@0,0/pci8086,8c14@1c,2/pci1b21,1060@0: > Jul 13 10:44:45 hipster SATA port 1 error > Jul 13 10:44:45 hipster sata: [ID 801845 kern.info] > /pci@0,0/pci8086,8c14@1c,2/pci1b21,1060@0: > Jul 13 10:44:45 hipster SATA port 1 error > Jul 13 10:44:45 hipster fmd: [ID 377184 daemon.error] SUNW-MSG-ID: > ZFS-8000-HC, TYPE: Error, VER: 1, SEVERITY: Major > Jul 13 10:44:45 hipster EVENT-TIME: Sun Jul 13 10:44:45 CEST 2014 > Jul 13 10:44:45 hipster PLATFORM: PowerEdge-T20, CSN: 33XJJZ1, HOSTNAME: > hipster > Jul 13 10:44:45 hipster SOURCE: zfs-diagnosis, REV: 1.0 > Jul 13 10:44:45 hipster EVENT-ID: 6fb72a24-271b-4b1b-9287-d5352ace8993 > Jul 13 10:44:45 hipster DESC: The ZFS pool has experienced currently > unrecoverable I/O > Jul 13 10:44:45 hipster failures. Refer to > http://illumos.org/msg/ZFS-8000-HC for more information. > Jul 13 10:44:45 hipster AUTO-RESPONSE: No automated response will be taken. > Jul 13 10:44:45 hipster IMPACT: Read and write I/Os cannot be serviced. > Jul 13 10:44:45 hipster REC-ACTION: Make sure the affected devices are > connected, then run > Jul 13 10:44:45 hipster 'zpool clear'. > Jul 13 10:45:00 hipster fmd: [ID 377184 daemon.error] SUNW-MSG-ID: > ZFS-8000-FD, TYPE: Fault, VER: 1, SEVERITY: Major > Jul 13 10:45:00 hipster EVENT-TIME: Sun Jul 13 10:45:00 CEST 2014 > Jul 13 10:45:00 hipster PLATFORM: PowerEdge-T20, CSN: 33XJJZ1, HOSTNAME: > hipster > Jul 13 10:45:00 hipster SOURCE: zfs-diagnosis, REV: 1.0 > Jul 13 10:45:00 hipster EVENT-ID: 52d16a83-6041-e362-b66f-ff4d1fb95a61 > Jul 13 10:45:00 hipster DESC: The number of I/O errors associated with a ZFS > device exceeded > Jul 13 10:45:00 hipster acceptable levels. Refer to > http://illumos.org/msg/ZFS-8000-FD for more information. > Jul
[OmniOS-discuss] ASMedia 1061 WORKING !
Hi to all I just plugged this card in an OmniOS box : http://sgp.imgmarket.net/sgp/201406/35765_b.jpg And the system recognises the hard disk connected to it, initialised it, and it is in use !!! I do not have yet anything about performance, but it is working !! Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] AS Media 1061
Hi to all Someone has give a try recently any PCIe card based on the ASm Media 1061 SATA 3 chipset ? http://www.asmedia.com.tw/eng/e_show_products.php?item=118 all mentions I have found via google are, at least 3 years old ... although all says that it did not work ! I do not need to boot from it, I just need an extra port to add a ZIL disk to a system . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] SAS card compatibility
Hi to all Someone knows if this card are compatible ( or even the same ) with IBM M1015 ? http://www.amazon.com/IBM-Serveraid-Controller-System-81Y4448/dp/B007V8S0D8 It can be flashed with the same IT firmware as the M1015 ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] industrial usb flash
Hi to all People are talking about "industrial grade" usb flash storage to use as boot device for Omni and napp-it . Exactly witch brand build this kind of device ? I just can not find anything like that on amazon .... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] create ordinary user
Using the repo http://scott.mathematik.uni-ulm.de/ wget -O - www.napp-it.org/afp | perl Nothing wrong here, but there are no ordinary user on the system, just the root ... Fábio Rabelo 2014-01-31 Zach Malone : > What package repo did you install Netatalk from, or did you compile it > yourself? Which utility is missing? > > On Thu, Jan 30, 2014 at 8:18 AM, Fábio Rabelo > wrote: >> Hi to all >> >> I am trying netatalk in an OminOS box, and having problem to create a user >> ... >> >> All and every how-to that I found in the web refers to an utilitary in >> command line from OpenSolaris, but this tool do not exist in OmniOS >> ... >> >> So, how can I create an ordinary user to authenticate against netatalk ? >> >> Thanks in advance ... >> >> >> Fábio Rabelo >> ___ >> OmniOS-discuss mailing list >> OmniOS-discuss@lists.omniti.com >> http://lists.omniti.com/mailman/listinfo/omnios-discuss ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] create ordinary user
Hi to all I am trying netatalk in an OminOS box, and having problem to create a user ... All and every how-to that I found in the web refers to an utilitary in command line from OpenSolaris, but this tool do not exist in OmniOS ... So, how can I create an ordinary user to authenticate against netatalk ? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] From Stable to Bloody and vice-versa
Hi to all Probably a basic question, but I did not find an answer on forum ... so : With this commands : pkg unset-publisher omnios pkg set-publisher -g http://pkg.omniti.com/omnios/release omnios pkg update reboot I am changing from Stable to Bloody, or vice-versa ? thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] next stable release
Hi to all Please, there are no pressure here, just planning my next implementation ... When will be released the next stable branch ?? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Netgear 10GB switch LACP SOLVED
2013/10/16 Michael Rasmussen : > On Wed, 16 Oct 2013 12:41:39 -0300 > Fábio Rabelo wrote: > >> Hi to all >> >> last week I ask here what was the most up-to-date how-to about LACP and >> OmniOS . >> >> Nobody answered, so I keep trying, and now I get it ! >> >> In the netgear 10 GB switch ( very good by the way !!! ) create the >> LACP with all defaults . >> >> In OmniOS I did this : >> >> >> dladm add-aggr -d ixgbe0 -d ixgbe1 1 >> > According to the man page for dladm -d should be -l > > dladm add-aggr [-t] [-R root-dir] -l ether-link1 [-l ether-link2...] > aggr-link That's the kind of problem I faced with this issue ... All how-tos over the web, ans most of man pages are out-dated ... I had to take one peace of info from here, another peace from there, and it took over a week to get all I need . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Netgear 10GB switch LACP SOLVED
Hi to all last week I ask here what was the most up-to-date how-to about LACP and OmniOS . Nobody answered, so I keep trying, and now I get it ! In the netgear 10 GB switch ( very good by the way !!! ) create the LACP with all defaults . In OmniOS I did this : dladm add-aggr -d ixgbe0 -d ixgbe1 1 ipadm create-addr -T static -a 192.168.1.20/24 aggr1/v4 dladm modify-aggr -L active -T short 1 My netwotk card are Intel, and the IP for this OmniOS box are 192.168.1.10 And now, finaly it is up and running ... I am posting it here to save time, if someone get this switcher, this are the way ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LACP how-to
Hi to all I am trying to get a dual port 10GB network card to work with a newly released 10GB switcher from Netgear, and been found lots of different how-to guides, some really really different from each other . Someone please can point me to the more up to date one ? I am running stable ( r151006 ) Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] from LACP to LAG1 ?!?
Hi to all I do not know if this is an off-topic, if it is, just inform me ... I will thank anyway .. I just received a follow-up from Netgear support in subject to a new 10GB switcher connecting to a Solaris box ( OmniOS naturaly, 151006 ) using LACP that is not working ( but works perfectly in another Cisco Switcher ) . They asked me to change from LACP to LAG1 , and I have no idea what they talking about ! Someone knows what is LAG1 ?!? And mostly, how to set it up ? Thanks in advance ... ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] LACP on netgear switcher
Hi to all I am trying to setup an LACP with 2 ports on a 10 GB Netgear switcher, and it is not working ! The switcher works on 1GB ant 10GB rates, and with Linux hosts the link agregation works fine, so it is not something wrong in the switcher itself . My former switrch was a Cisco with 8 ports, and I need more ports, so I get a brand new netgear with 24 1G/10G . The link comes up, but no trafic comes in or out ... Someone had any issue like this ??? thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] PCIe slot do not work
Hi to all I have a system running OmniOS on this board : http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8SGL-F.cfm The problem, I have to add a 10 GB network card, and the system do not recognize anything plugged in any other slot than the slot 3 ( the one more distant from CPU ) . This slot already contain the LSI2008 . It is OmniOS, if I boot the same board with Linux ( Ubuntu Live ) all cards connected in all PCIe slots works fine . If I plug the PSL2008 in any other slot, OmniOS do not recognize any of the HD connected to it . I am running stable ... Anyone have some issue like this ? How can I solve it ?? Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] poor nfs performence.
Hi to all .. This article were my guideline in my first implementation : http://constantin.glez.de/blog/2010/04/ten-ways-easily-improve-oracle-solaris-zfs-filesystem-performance My gess, you need more RAM . In your description of the system, you have a lot of processing power, but very litle RAM ... Sata controler can impact that too . Fábio Rabelo 2013/9/10 Muhammad Yousuf Khan : > i am using Raidz2 with 4 drives. > > i am using dell 490 with 2x3.0 Xeon processors. > 12 GB RAM. > > > 1 40gb HD for omni OS > 4 different size disks for Raidz2. set of 2x160gb and 2x250 gb. > every thing is working well except VM file transfer performance. hosted on > NFS. > > when i SCP from omniOS to another linux server it copy > > root@omni:/acipool# scp test.tmp root@10.x.x.13:/ > The authenticity of host '10.x.x.13 (10.xx.xx.13)' can't be established. > RSA key fingerprint is da:x:xx:xx:8f:b1:ed:d9:f4:dd:e3xxx:21:5f:01:23. > Are you sure you want to continue connecting (yes/no)? yes > Warning: Permanently added '10.xx.xx.13' (RSA) to the list of known hosts. > root@10.x.x.13's password: > test.tmp 100% > || > 5120 MB07:37 > > > which i think is fine due to Raidz and 2 parities. > > however on VM hosted on NFS taking too much time. > > a file of 500 MB copying from NFS to my desktops took 20 minutes. > > but file from my desktop to NFS is normal. for example a file of 500Mb > taking less then a minute to copy. > > but same file when i try to copy from NFS to desktop some time it shows 100 > plus minutes and dynamically changing time but eventually it is taking too > much time. > > some time copying from NFS is a bit quicker and some time dead slow. > > one thing i have also noticed that once the copy is dead slow it suddenly > starts copying the data very fast and it happens for few seconds and then > again dead slow. > > > any idea what is happening what mistake i am doing here ? > > any advice would be highly appreciated. > > i will share my further testing later. > > Thanks, > > Yousuf > > > > > > > > > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] 10GB adapter
This Intel card works with OmniOS ?? http://www.provantage.com/intel-x540t1~7ITEN0HQ.htm Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] SolarFlare 10GB network card
Hi to all Someone knows if the SolarFlare 10GB network cards works with OmniOS ? They are getting realy cheap lately ... http://www.provantage.com/solarflare-communications-sfn5152f~7SOLA004.htm http://www.provantage.com/solarflare-communications-sfn5162f~7SOLA003.htm http://www.provantage.com/solarflare-communications-sfn5161t~7SOLA001.htm Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] areca or lsi
This is my guideline article in this subject : http://blog.zorinaq.com/?e=10 My box uses the IBM 1015 ones, works very good Fábio Rabelo 2013/7/18 Tobias Oetiker > Folks, > > We are specing a new omnios server box ... and were just told by > our vendor, that LSI HBAs were much slower (50%) than Areca Controllers > running in JBOD mode ... and that they would therefore recommend > Areca (we use areca for raid6 in linux boxes, but have never used it in > JBOD > mode with illumos, yet). > > Which controller would you choose for a new system ? > > cheers > tobi > > -- > Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland > http://it.oetiker.ch t...@oetiker.ch ++41 62 775 9902 / sb: -9900 > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Supermicro board with LSI 2008
Yes, I found it : ftp://ftp.supermicro.com/Driver/SAS/LSI/ So, after I flash this controllers with IT firmware, it works like IBM 1015 ?!? And, thanks a lot ... Fábio Rabelo 2013/6/12 Eric Sproul > On Wed, Jun 12, 2013 at 8:07 AM, Fábio Rabelo > wrote: > > This LSI 2008 works with OminOS as it comes, ? > > > > Or it needs some firmware change ?? > > The LSI 2008 is supported by either mr_sas(7D) or mpt_sas(7D), > depending on the firmware. The default on most Supermicro boards (and > LSI HBAs in general) is "IR", or RAID-mode, firmware. This is what > mr_sas attaches to. If you re-flash the chip with "IT", or non-RAID > mode, firmware, then mpt_sas will attach. There are a couple of SKUs > that Supermicro ships that already have IT firmware in the onboard SAS > chip. The SKUs end in "-JBOD" and they use the 2308, not the 2008, > but mpt_sas is still the driver that supports it. > > > http://www.supermicro.com/products/motherboard/Xeon/C600/X9DR7-LN4F-JBOD.cfm > > http://www.supermicro.com/products/motherboard/Xeon/C600/X9DRD-7LN4F-JBOD.cfm > > These are known informally to the community as the "ZFS Special". :) > > Even if you opt for one of the other boards with a 2008 chip, you > should still be able to find IT firmware bundles on Supermicro's FTP > site. > > Eric > ___ > OmniOS-discuss mailing list > OmniOS-discuss@lists.omniti.com > http://lists.omniti.com/mailman/listinfo/omnios-discuss > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Supermicro board with LSI 2008
Hi to all Did someone tested any recent Supermicro motherboard with "Integrated LSI 200" SAS ? Like this : http://www.supermicro.com/Aplus/motherboard/Opteron6000/SR56x0/H8DG6-F.cfm http://www.supermicro.com/Aplus/motherboard/Opteron4000/SR56x0/H8DCL-6F.cfm http://www.supermicro.com/products/motherboard/Xeon/C600/X9DR7-TF_.cfm This LSI 2008 works with OminOS as it comes, ? Or it needs some firmware change ?? Thanks in advance ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] OWC Mercury Accelsior
Some one tested one of this babys with OminOS : http://www.storagereview.com/owc_mercury_accelsior_pcie_ssd_review Specs are Little sketchy, but mention LSI chipset ... Thinking about ZIL and/or cache Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] statistics
Hi to all First, thanks a lot for the product, it is realy great ! My question now : Is there any way to make a graphical statsics od ZFS performance ? I have some botleneck in my sistem ( OminOS V 0.9a9 Nightly mar 04 2013 + Napp-it ) that I can not identify ... It stores all VMs in a Proxmox Cluster with 5 nodes and 14 mixed VMs ( 3 W2K12 Server, 2 Win7Pro and all others Linux Debian or Ubuntu ) . There are a 10 GB switcher to interconnect all nodes and Storage . Almost all aplications are running fine and fast . The exception are a Debian running Oracle 11G . I just do not know how to find out what I have to do ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] flash to IT
Hi to all I have in my hands one IBM 1015, and I inttend to flash it to use with OmniOS . All how-tos I can find are a litle sparce, with not so sure abbout things ... Thare a a "recommended" way to do a cross-flash ?!? Thanks in advance . Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] ZIL partition size
Hi to all ... and thanks in advance ... I believe it is a simple question, there are a recommended and/or minimum size to a disk/partition to store ZIL logs ?!? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] ssd and log
Hi to all ... A question : Where are the default to store zfs logs ? Iff the boot disk is SSD, the logs will be saved in it ??? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] imr_sas has no quiesce
I am feeling bold today where I can find bloody ?!? ;- ))) Fábio Rabelo 2013/4/12 Eric Sproul > On Fri, Apr 12, 2013 at 4:25 PM, Fábio Rabelo > wrote: > > OmniOS did not recognized any hard disk attached to the controller before > > the driver installation . > > > > The diver are present in download section of Intel site . > > > > If there are a better option, how can I use it ?!? > > If you want to stay on a stable release, you need to wait for r151006. > That hardware is supported in bloody today. > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] imr_sas has no quiesce
OmniOS did not recognized any hard disk attached to the controller before the driver installation . The diver are present in download section of Intel site . If there are a better option, how can I use it ?!? Fábio Rabelo 2013/4/12 Eric Sproul > quiesce(9E) is required for Fast Reboot, which is the default reboot > method. Fast Reboot avoids going through BIOS/EFI boot by loading a > new copy of the kernel into memory and jumping to it, thereby saving > time, especially on large systems, where memory and device enumeration > can take 5 minutes or more. In order to make this possible, all > devices must be stopped from sending interrupts or modifying memory, > hence quiesce(). What those messages are telling you is that those > drivers don't support quiesce(), which *should* be followed by a > reboot through BIOS/EFI. > > You can try 'reboot -p' which will force the system to boot fully > through hardware POST, which will avoid the attempt to quiesce. If > this works for you, you can make the change permanent by altering the > configuration of the system/boot-config:default service: > > # svccfg -s "system/boot-config:default" \ >setprop config/fastreboot_default=false > # svcadm refresh svc:/system/boot-config:default > > Thereafter, a regular 'reboot' will work the same as 'reboot -p'. > > Note that there is a pending issue to add quiesce() to ixgbe: > https://www.illumos.org/issues/3708 > > The message about "imr_sas" is strange, since we don't ship that > driver. It is an old, closed-source driver from LSI. Did you obtain > it from somewhere else? Your card should be supported by mr_sas in > OmniOS bloody and in the upcoming r151006 stable release. > > Eric > ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] imr_sas has no quiesce
Hi to all I just installed a SAS card from Intel, the driver installed with no errors nor warnings, but when I reboot the system this msg appears in console : imr_sas has no quiesce ixgbe has no quiesce And the boot process never ends ... login never appears ... What it can be ?? ixgbe are the 10 GB net card, and this msg never appeared before the sas driver installation ... This is the card : http://www.intel.com/content/www/us/en/servers/raid/raid-controller-rs2wc.html Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] grub timeout
Hi to all How can I change the grub timeout ? 30 seconds is too much ... Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
Re: [OmniOS-discuss] Highpoint 640 or 640L
2013/3/25 Eric Sproul > On Mon, Mar 25, 2013 at 3:15 PM, Fábio Rabelo > wrote: > > Hi to all > > > > Someone knows if Marvel based SATA cards works ? > > > > http://www.highpoint-tech.com/USA_new/series_rr600-overview.htm > > > > Highpoint rocketraid 640L : based on Marvel 88se9235 > > > > Highpoint rocketraid 640 : based on masrvel 88se9128 > > I don't believe any Marvell 9xxx SATA chips have ever been supported > in Solaris or any derivative. An inexpensive alternative would be > something based on SiliconImage 3124 This SI chip are SATA ll only ! My hard disks are Western Digital 4 TB sata 3 ! Are there any better option ? Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] Highpoint 640 or 640L
Hi to all Someone knows if Marvel based SATA cards works ? http://www.highpoint-tech.com/USA_new/series_rr600-overview.htm Highpoint rocketraid 640L : based on Marvel 88se9235 Highpoint rocketraid 640 : based on masrvel 88se9128 This cards are not for boot the system, just for zfs storage . I will put napp-it over Omni ... Thanks in advance Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
[OmniOS-discuss] D-Link FGE-528T
Hi to all ... This is my first post, from Brasil, so please forgive my bad English ... I am installing OmniOS to serve as Storage to a vitalization project . The hardware are Supermicro single Opteron . I intend to bind both embedded network port to talk with a dedicated switcher with the nodes ... So I need another network card top use to manage the OminOS . To that task I get a D-Link DGE-528T ( based on Realtek 8169S ) . But OmniOS do not recognise this card ! There are a way to workaround it ?? Or I will need to get another card ? I just have PCI slots available in this system, all PCIe slots are fulfilled with SATA cards ... Thanks in advance to any help Fábio Rabelo ___ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
