Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Hi, successfully tested images for A10-OLinuXino-LIME and A20-OLinuXIno-LIME2 (HDMI, network, USB keyboard) and A13-OLinuXino-WIFI (VGA, onboard WiFi, USB keyboard). Great work. Thanks. Br, Frank -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
On Wed, 23 Nov 2016 14:00:11 +0100 Dirk Müllerwrote: > Hi All, > > over the last few days I've been pretty busy with enabling > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, Hello, I tested JeOS on Cubieboard, Cubieboard 2 and Cubietruck. There is no other image variant so I installed JeOS, got serial console working, got LAN working, and tried to install a DE. In the end I tested only Enlightenment on Cubietruck which starts fine. There are a few observations - the initial installation displays progress on the serial console but not HDMI - this may be in part due to some [un]blank console attempt failing because it is targeting wrong device which I noticed scrolling past - there is no ACPI support. It is needed for the power button working properly or some alternate emulation needs to be supported bug 1012325 Thanks for bringing these. The boot is a bit slower than bare kernel without initrd but having one kernel for all boards and bootloader with relatively sane GUI helps a lot. Thanks Michal -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Hello Dirk, On Wed, Nov 23, 2016 at 4:00 PM, Dirk Müllerwrote: > Hi All, > > over the last few days I've been pretty busy with enabling > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, > and I'm happy to report that we now have some images available: > > http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/appliances/ > http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliances/ > > As you can see its a pretty elaborative list of images, and I don't > have time to test all of them myself. so whoever is interested in > having some of those variants working for him, please try them out and > report both successes and failures. The overall goal is to announce > the ARM port end of next week (Dec 1st) so it would be great to have > some testing feedback before that (and << before that so that we can > maybe even fix it before announcement). > I just tested openSUSE-Leap42.2-ARM-XFCE-paz00.armv7l-2016.11.21-Build3.1.raw.xz with paz00 (Toshiba AC100 smartbook), but with old non EFI U-Boot preloaded on device: 1. First boot: boot to login - fine, xdm start - fine, reboot - fine. 2. Second boot: boot to login - fine, xdm start - fine, start xfce - very long start (starting gnome keyring daemon), but fine in the end. Wifi - working fine. I will test mainline and Tumbleweed U-Boot versions later, but overall everything working as expected for kernel version bundled with Leap 42.2 and ready for Toshiba AC100 users. Thank you very much. > > Thanks a lot in advance, > Dirk > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org > -- Best Regards, Misha Komarovskiy zombahatgmaildotcom -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Op woensdag 23 november 2016 14:00:11 schreef Dirk Müller: > Hi All, > > over the last few days I've been pretty busy with enabling > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, > and I'm happy to report that we now have some images available: > > http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliance > s/ > Tested openSUSE-Leap42.2-ARM-JeOS-raspberrypi3.aarch64-2016.11.21- Build3.1.raw.xz Booted OK, even with a USB storage device connected. It delayed booting significantly, but it worked. To my surprise also a wlan0 device was present, which I was able to configure using "yast network". Tried to make bluetooth working, but failed. The firmware for the device is available in /lib/firmware/brcm/ Log does not show loading that firmware. Tried some of my favorite software, which was OK. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Hi all, On 23/11/16 14:00, Dirk Müller wrote: Hi All, over the last few days I've been pretty busy with enabling pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, and I'm happy to report that we now have some images available: http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/appliances/ http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliances/ As you can see its a pretty elaborative list of images, and I don't have time to test all of them myself. so whoever is interested in having some of those variants working for him, please try them out and report both successes and failures. The overall goal is to announce the ARM port end of next week (Dec 1st) so it would be great to have some testing feedback before that (and << before that so that we can maybe even fix it before announcement). I tested my beaglebone black with openSUSE-Leap42.2-ARM-JeOS-beaglebone.armv7l-2016.11.21-Build3.1.raw.xz When loading the kernel the device gets resetted and starts over to load u-boot and grub: Loading linux.vmx... Loading initrd.vmx... data abort pc : [<9dea62dc>] lr : [<9dea937c>] reloc pc : [<7e7512dc>]lr : [<7e75437c>] sp : 9ef33df8 ip : 9de93663 fp : 9de89ac0 r10: 9ded88b4 r9 : 011e r8 : 0008 r7 : r6 : r5 : r4 : 9dea807c r3 : r2 : r1 : 5440 r0 : Flags: nZCv IRQs off FIQs on Mode SVC_32 Resetting CPU ... resetting ... I will retest with the new builds, which have grub disabled as soon as they are ready. Regards, Matthias -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Hi Dirk, my Cubox-i Pro booted just fine the JeOS image. Thanks for your great work. Alessio 2016-11-23 14:00 GMT+01:00 Dirk Müller: > Hi All, > > over the last few days I've been pretty busy with enabling > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, > and I'm happy to report that we now have some images available: > > http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/appliances/ > http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliances/ > > As you can see its a pretty elaborative list of images, and I don't > have time to test all of them myself. so whoever is interested in > having some of those variants working for him, please try them out and > report both successes and failures. The overall goal is to announce > the ARM port end of next week (Dec 1st) so it would be great to have > some testing feedback before that (and << before that so that we can > maybe even fix it before announcement). > > > Thanks a lot in advance, > Dirk > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org > -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Hi! Am Mittwoch, 23. November 2016, 21:18:12 CET schrieb Herbert Graeber: > Am Mittwoch, 23. November 2016, 14:00:11 CET schrieb Dirk Müller: > > over the last few days I've been pretty busy with enabling > > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, > > and I'm happy to report that we now have some images available: > > > > http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/applianc > > es / > > http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/applianc > > e > > s/ > > > > As you can see its a pretty elaborative list of images, and I don't > > have time to test all of them myself. so whoever is interested in > > having some of those variants working for him, please try them out and > > report both successes and failures. The overall goal is to announce > > the ARM port end of next week (Dec 1st) so it would be great to have > > some testing feedback before that (and << before that so that we can > > maybe even fix it before announcement). > > I have tried the leap 42.2 raspberry pi3 Jeos image. On the second boot I > have got the same failure like for tumbleweed on raspberry pi and pi2 (see > mail > above) with a slightly different error message: > > error: attempt to read or write outside of partition > > and landed in the grub rescue mode :-( I tried "openSUSE-Leap42.2-ARM-JeOS-raspberrypi3.aarch64-2016.11.24- Build1.2.raw.xz". Now the Pi3 boots, eth0 and wlan0 works. I will continue tests... Herbert signature.asc Description: This is a digitally signed message part.
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
On 24/11/2016 20:15, Alexander Graf wrote: On 23/11/2016 14:00, Dirk Müller wrote: Hi All, over the last few days I've been pretty busy with enabling pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, and I'm happy to report that we now have some images available: http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/appliances/ http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliances/ As you can see its a pretty elaborative list of images, and I don't have time to test all of them myself. so whoever is interested in having some of those variants working for him, please try them out and report both successes and failures. The overall goal is to announce the ARM port end of next week (Dec 1st) so it would be great to have some testing feedback before that (and << before that so that we can maybe even fix it before announcement). That panda image is broken. Grub2 in Leap 42.2 is older than Tumbleweed, so it's missing critical armv7 fixes for EFI boot. If I copy the Tumbleweed grub2 binary onto the image, it seems to work. Ah, there's more breakage. The grub.cfg generator doesn't know which image format to take, so it picks vmlinux-foo.gz which grub2 can't boot from, as it needs the zImage. I think we should just disable EFI boot for all armv7 systems. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
Op woensdag 23 november 2016 14:00:11 schreef Dirk Müller: > Hi All, > > over the last few days I've been pretty busy with enabling > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, > and I'm happy to report that we now have some images available: > > http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/appliances > / Inspected this one, but did not find anything with raspberrypi2 in its name. Will try http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliances/ with raspberrypi3. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
Re: [opensuse-arm] Request for testing help: openSUSE Leap 42.2 for ARMv7 images
On 23 November 2016 at 14:00, Dirk Müllerwrote: > Hi All, > > over the last few days I've been pretty busy with enabling > pre-configured appliances for ARMv7 and AArch64 on openSUSE Leap 42.2, > and I'm happy to report that we now have some images available: > > http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/appliances/ > http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/appliances/ > > As you can see its a pretty elaborative list of images, and I don't > have time to test all of them myself. so whoever is interested in > having some of those variants working for him, please try them out and > report both successes and failures. The overall goal is to announce > the ARM port end of next week (Dec 1st) so it would be great to have > some testing feedback before that (and << before that so that we can > maybe even fix it before announcement). > > > Thanks a lot in advance, > Dirk > -- Hi Dirk, Thanks for doing this! Will defintely test this Saturday as I am not based in Rouen week days and the Raspberry Pi are not with me :) I will let you know accordingly. Best, Jimmy -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org