[Qgis-user] documentation error, please report back to QGIS devs
I tried to download the latest version and got the message: This is a documentation error, please report back to QGIS devs. There was no link with it. I have a screen shot. Can someone please send me a link to the devs, Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] counting fish
Is there an easy way, even an existing plugin, to identify photos which show an object (fish) swimming over a white board. I live on a river and there is a potential problem with alewives, an extremely important fish in the food chain. I'd like to find a way with a wildlife camera to take a photo at regular intervals over 3 week. The more photos I can handle (possibly thousands) the more accurate my count. I was hoping to find an automated way to identify those photos which show an object on the whitish background. I thought it should be possible to just look at the average gray value of the photo. Is there a fairly easy way to do this? Thanks for any help. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] plugin error
I got the following message Plugin MetaSearch: The plugin will be disabled because it crashed QGIS during last startup. Please report an issue and re-enable the plugin when the problem has been solved. I use the 2.14. Googling it did not result in a solution. Should I report it as a bug or is it know already? Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] advanced digitizing panel
Hallo Werner Danke für den Volltreffer in´s blaue. Thanks for the perfect shot into the blue. I thought it would work like in other occasions, where if snapping is enabled but nothing to snap into is around that it just uses the pointer location. :) Jake -Original Message- From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Werner Macho Sent: Tuesday, March 01, 2016 12:21 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] advanced digitizing panel Hi A guess into the blue - did you probably set some snapping options? regards Werner On 01/03/16 17:46, Jake Maier wrote: > It’s driving me nuts. Seems to be so straight forward and I don’t get it. > > The advanced digitizing panel tool seems to work sometimes as > expected, and at times I cannot draw the actual leg of a line or polygon. > > When I enter angle and distance, the tool draws the rubber band all > right but when I click the endpoint it does not draw the actual polygon. > Sometimes it will but most of the time it does not add the segment to > the feature. > > There are not so many things to adjust on the tool, but I can’t figure > out what I do wrong or misunderstand. > > Can someone please put me on the right track > > Thanks > > Jake > > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] advanced digitizing panel
It's driving me nuts. Seems to be so straight forward and I don't get it. The advanced digitizing panel tool seems to work sometimes as expected, and at times I cannot draw the actual leg of a line or polygon. When I enter angle and distance, the tool draws the rubber band all right but when I click the endpoint it does not draw the actual polygon. Sometimes it will but most of the time it does not add the segment to the feature. There are not so many things to adjust on the tool, but I can't figure out what I do wrong or misunderstand. Can someone please put me on the right track Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] wms call responds with error
Hi Bernhard. Thanks for staying with me on this problem. I'm not sure I know what you mean. But I think there may be a problem accessing it. I looked at those plugins and try to find and load them in qgis but All in plugins shows only the installed plugins not any of the plugins from the repository. This may be a hint that qgis cannot access the internet. Any ideas how to dig deeper? Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Wednesday, September 09, 2015 1:53 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error Hi Jake, can you access the plugins from the official repo? Bernhard Am 08.09.2015 um 23:59 schrieb Jake Maier: > I still have the problem that qgis seems not to see the internet. I > can connect to the Maine GIS server with a browser, but when I try > with qgis, I > get: "host ... not found". > I have a stand along pc with windows 7 without proxy. I looked into > the preferences and there no proxies are listed. > Is there anywhere else within qgis where I can check or change how > qgis accesses the internet? > Thanks for help > Jake > > -Original Message- > From: qgis-user-boun...@lists.osgeo.org > [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier > Sent: Tuesday, September 08, 2015 10:36 AM > To: qgis-user@lists.osgeo.org > Subject: Re: [Qgis-user] wms call responds with error > > I had another problem after the installation of the ssd-drive. > The geo-referencer did not start. I checked on the internet and found > the solution in deleting a registry entry about the referencer and > then it work ok. > I also found some info on the web about my problem with the wms > server, but it was not quite the same and I could not get it to work. > I'm not sure if that helps any in finding the problem. > Thanks again looking into it. > Jake > > -Original Message- > From: qgis-user-boun...@lists.osgeo.org > [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard > Ströbl > Sent: Tuesday, September 08, 2015 9:42 AM > To: qgis-user@lists.osgeo.org > Subject: Re: [Qgis-user] wms call responds with error > > Hi Jake, > > I had no problems in requesting a GetCapabilities in my browser > http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map > ICE=WM > S=GetCapabilities=1.3.0 > > What happens if you use that URL in your browser? Do you get a > capabilities document or not? > I doubt that this is a QGIS problem. Are you behind a proxy? If yes > you have to tell QGIS in Settings - network. > > Bernhard > > Am 08.09.2015 um 15:00 schrieb Jake Maier: >> Yes, Richard that's the server. And yes I still have the same problem. >> I just tried again with Wien and got the same error. >> I was hoping it's on the server side, but apparently you had no problems. >> I just tried also with the exact link you used and got the same error. >> Do you or anyone? have an idea how to troubleshoot this problem? >> Thanks for your help >> Jake >> >> >> -Original Message- >> From: Richard Duivenvoorde [mailto:rdmaili...@duif.net] >> Sent: Tuesday, September 08, 2015 4:53 AM >> To: Jake Maier; qgis-user@lists.osgeo.org >> Subject: Re: [Qgis-user] wms call responds with error >> >> >> Hi Jake, >> >> Still having problems? >> >> You did not provide info about which service url you were using. >> >> With Pisa normally my wms's are still working fine. >> >> I googled a mapserver url from maine.gov >> >> http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map >> >> and that one worked fine with me here >> >> Regards, >> >> Richard Duivenvoorde >> >> On 07-09-15 20:46, Jake Maier wrote: >>> A few years ago, I set up a few wms servers from the Maine GIS >>> office to download Maine airphotos. This always worked without >>> problem but all of a sudden I get the following error >>> >>> >>> >>> WMS Provider >>> >>> Failed to download capabilities: >>> >>> Download of capabilities failed: Host mapserver.maine.gov not found. >>> >>> >>> >>> Mapserver.maine.gov is up and when I go to edit link the http:// is >>> also there (other than in the error message) >>> >>> All the wms links do not work anymore including the non-maine.gov sites. >>> >>> I now updated to Pisa and it is still giving the same error message. >>> >>> Anyone knows what's
Re: [Qgis-user] wms call responds with error
I still have the problem that qgis seems not to see the internet. I can connect to the Maine GIS server with a browser, but when I try with qgis, I get: "host ... not found". I have a stand along pc with windows 7 without proxy. I looked into the preferences and there no proxies are listed. Is there anywhere else within qgis where I can check or change how qgis accesses the internet? Thanks for help Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: Tuesday, September 08, 2015 10:36 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error I had another problem after the installation of the ssd-drive. The geo-referencer did not start. I checked on the internet and found the solution in deleting a registry entry about the referencer and then it work ok. I also found some info on the web about my problem with the wms server, but it was not quite the same and I could not get it to work. I'm not sure if that helps any in finding the problem. Thanks again looking into it. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, September 08, 2015 9:42 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error Hi Jake, I had no problems in requesting a GetCapabilities in my browser http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map=WM S=GetCapabilities=1.3.0 What happens if you use that URL in your browser? Do you get a capabilities document or not? I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have to tell QGIS in Settings - network. Bernhard Am 08.09.2015 um 15:00 schrieb Jake Maier: > Yes, Richard that's the server. And yes I still have the same problem. > I just tried again with Wien and got the same error. > I was hoping it's on the server side, but apparently you had no problems. > I just tried also with the exact link you used and got the same error. > Do you or anyone? have an idea how to troubleshoot this problem? > Thanks for your help > Jake > > > -Original Message- > From: Richard Duivenvoorde [mailto:rdmaili...@duif.net] > Sent: Tuesday, September 08, 2015 4:53 AM > To: Jake Maier; qgis-user@lists.osgeo.org > Subject: Re: [Qgis-user] wms call responds with error > > > Hi Jake, > > Still having problems? > > You did not provide info about which service url you were using. > > With Pisa normally my wms's are still working fine. > > I googled a mapserver url from maine.gov > > http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map > > and that one worked fine with me here > > Regards, > > Richard Duivenvoorde > > On 07-09-15 20:46, Jake Maier wrote: >> A few years ago, I set up a few wms servers from the Maine GIS office >> to download Maine airphotos. This always worked without problem but >> all of a sudden I get the following error >> >> >> >> WMS Provider >> >> Failed to download capabilities: >> >> Download of capabilities failed: Host mapserver.maine.gov not found. >> >> >> >> Mapserver.maine.gov is up and when I go to edit link the http:// is >> also there (other than in the error message) >> >> All the wms links do not work anymore including the non-maine.gov sites. >> >> I now updated to Pisa and it is still giving the same error message. >> >> Anyone knows what's going on? >> >> Thanks for any help >> >> Jake >> >> And thank you for being such a fantastic community >> >> >> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user >> > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > > __ Information from ESET Mail Security, version of virus > signature database 12220 (20150908) __ > > The message was checked by ESET Mail Security. > http://www.eset.com > > __ Information from ESET Mail Security, version of virus signature database 12220 (20150908) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] wms call responds with error
Yes, Richard that's the server. And yes I still have the same problem. I just tried again with Wien and got the same error. I was hoping it's on the server side, but apparently you had no problems. I just tried also with the exact link you used and got the same error. Do you or anyone? have an idea how to troubleshoot this problem? Thanks for your help Jake -Original Message- From: Richard Duivenvoorde [mailto:rdmaili...@duif.net] Sent: Tuesday, September 08, 2015 4:53 AM To: Jake Maier; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error Hi Jake, Still having problems? You did not provide info about which service url you were using. With Pisa normally my wms's are still working fine. I googled a mapserver url from maine.gov http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map and that one worked fine with me here Regards, Richard Duivenvoorde On 07-09-15 20:46, Jake Maier wrote: > A few years ago, I set up a few wms servers from the Maine GIS office > to download Maine airphotos. This always worked without problem but > all of a sudden I get the following error > > > > WMS Provider > > Failed to download capabilities: > > Download of capabilities failed: Host mapserver.maine.gov not found. > > > > Mapserver.maine.gov is up and when I go to edit link the http:// is > also there (other than in the error message) > > All the wms links do not work anymore including the non-maine.gov sites. > > I now updated to Pisa and it is still giving the same error message. > > Anyone knows what's going on? > > Thanks for any help > > Jake > > And thank you for being such a fantastic community > > > > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] wms call responds with error
I did have some computer issues and cleaned out a lot of malware which I got by not watching what was added to a download. And I took that opportunity to switch my c:drive to a ssd (which is noticeable faster in all windows operations) using the system image for the transfer without having to reinstall everything again. It seems to work fine except the server downloads. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, September 08, 2015 9:42 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error Hi Jake, I had no problems in requesting a GetCapabilities in my browser http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map=WM S=GetCapabilities=1.3.0 What happens if you use that URL in your browser? Do you get a capabilities document or not? I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have to tell QGIS in Settings - network. Bernhard Am 08.09.2015 um 15:00 schrieb Jake Maier: > Yes, Richard that's the server. And yes I still have the same problem. > I just tried again with Wien and got the same error. > I was hoping it's on the server side, but apparently you had no problems. > I just tried also with the exact link you used and got the same error. > Do you or anyone? have an idea how to troubleshoot this problem? > Thanks for your help > Jake > > > -Original Message- > From: Richard Duivenvoorde [mailto:rdmaili...@duif.net] > Sent: Tuesday, September 08, 2015 4:53 AM > To: Jake Maier; qgis-user@lists.osgeo.org > Subject: Re: [Qgis-user] wms call responds with error > > > Hi Jake, > > Still having problems? > > You did not provide info about which service url you were using. > > With Pisa normally my wms's are still working fine. > > I googled a mapserver url from maine.gov > > http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map > > and that one worked fine with me here > > Regards, > > Richard Duivenvoorde > > On 07-09-15 20:46, Jake Maier wrote: >> A few years ago, I set up a few wms servers from the Maine GIS office >> to download Maine airphotos. This always worked without problem but >> all of a sudden I get the following error >> >> >> >> WMS Provider >> >> Failed to download capabilities: >> >> Download of capabilities failed: Host mapserver.maine.gov not found. >> >> >> >> Mapserver.maine.gov is up and when I go to edit link the http:// is >> also there (other than in the error message) >> >> All the wms links do not work anymore including the non-maine.gov sites. >> >> I now updated to Pisa and it is still giving the same error message. >> >> Anyone knows what's going on? >> >> Thanks for any help >> >> Jake >> >> And thank you for being such a fantastic community >> >> >> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user >> > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > > __ Information from ESET Mail Security, version of virus > signature database 12220 (20150908) __ > > The message was checked by ESET Mail Security. > http://www.eset.com > > __ Information from ESET Mail Security, version of virus signature database 12220 (20150908) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] wms call responds with error
I had another problem after the installation of the ssd-drive. The geo-referencer did not start. I checked on the internet and found the solution in deleting a registry entry about the referencer and then it work ok. I also found some info on the web about my problem with the wms server, but it was not quite the same and I could not get it to work. I'm not sure if that helps any in finding the problem. Thanks again looking into it. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, September 08, 2015 9:42 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error Hi Jake, I had no problems in requesting a GetCapabilities in my browser http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map=WM S=GetCapabilities=1.3.0 What happens if you use that URL in your browser? Do you get a capabilities document or not? I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have to tell QGIS in Settings - network. Bernhard Am 08.09.2015 um 15:00 schrieb Jake Maier: > Yes, Richard that's the server. And yes I still have the same problem. > I just tried again with Wien and got the same error. > I was hoping it's on the server side, but apparently you had no problems. > I just tried also with the exact link you used and got the same error. > Do you or anyone? have an idea how to troubleshoot this problem? > Thanks for your help > Jake > > > -Original Message- > From: Richard Duivenvoorde [mailto:rdmaili...@duif.net] > Sent: Tuesday, September 08, 2015 4:53 AM > To: Jake Maier; qgis-user@lists.osgeo.org > Subject: Re: [Qgis-user] wms call responds with error > > > Hi Jake, > > Still having problems? > > You did not provide info about which service url you were using. > > With Pisa normally my wms's are still working fine. > > I googled a mapserver url from maine.gov > > http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map > > and that one worked fine with me here > > Regards, > > Richard Duivenvoorde > > On 07-09-15 20:46, Jake Maier wrote: >> A few years ago, I set up a few wms servers from the Maine GIS office >> to download Maine airphotos. This always worked without problem but >> all of a sudden I get the following error >> >> >> >> WMS Provider >> >> Failed to download capabilities: >> >> Download of capabilities failed: Host mapserver.maine.gov not found. >> >> >> >> Mapserver.maine.gov is up and when I go to edit link the http:// is >> also there (other than in the error message) >> >> All the wms links do not work anymore including the non-maine.gov sites. >> >> I now updated to Pisa and it is still giving the same error message. >> >> Anyone knows what's going on? >> >> Thanks for any help >> >> Jake >> >> And thank you for being such a fantastic community >> >> >> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user >> > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > > __ Information from ESET Mail Security, version of virus > signature database 12220 (20150908) __ > > The message was checked by ESET Mail Security. > http://www.eset.com > > __ Information from ESET Mail Security, version of virus signature database 12220 (20150908) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] wms call responds with error
Hi Bernhard I had no problem clicking on your link and showing it in the browsew. I can't get it in Wien nor in Pisa. (the 2 versions of qgis I have installed) Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, September 08, 2015 9:42 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] wms call responds with error Hi Jake, I had no problems in requesting a GetCapabilities in my browser http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map=WM S=GetCapabilities=1.3.0 What happens if you use that URL in your browser? Do you get a capabilities document or not? I doubt that this is a QGIS problem. Are you behind a proxy? If yes you have to tell QGIS in Settings - network. Bernhard Am 08.09.2015 um 15:00 schrieb Jake Maier: > Yes, Richard that's the server. And yes I still have the same problem. > I just tried again with Wien and got the same error. > I was hoping it's on the server side, but apparently you had no problems. > I just tried also with the exact link you used and got the same error. > Do you or anyone? have an idea how to troubleshoot this problem? > Thanks for your help > Jake > > > -Original Message- > From: Richard Duivenvoorde [mailto:rdmaili...@duif.net] > Sent: Tuesday, September 08, 2015 4:53 AM > To: Jake Maier; qgis-user@lists.osgeo.org > Subject: Re: [Qgis-user] wms call responds with error > > > Hi Jake, > > Still having problems? > > You did not provide info about which service url you were using. > > With Pisa normally my wms's are still working fine. > > I googled a mapserver url from maine.gov > > http://mapserver.maine.gov/wms/mapserv.exe?MAP=c:/wms/basemap.map > > and that one worked fine with me here > > Regards, > > Richard Duivenvoorde > > On 07-09-15 20:46, Jake Maier wrote: >> A few years ago, I set up a few wms servers from the Maine GIS office >> to download Maine airphotos. This always worked without problem but >> all of a sudden I get the following error >> >> >> >> WMS Provider >> >> Failed to download capabilities: >> >> Download of capabilities failed: Host mapserver.maine.gov not found. >> >> >> >> Mapserver.maine.gov is up and when I go to edit link the http:// is >> also there (other than in the error message) >> >> All the wms links do not work anymore including the non-maine.gov sites. >> >> I now updated to Pisa and it is still giving the same error message. >> >> Anyone knows what's going on? >> >> Thanks for any help >> >> Jake >> >> And thank you for being such a fantastic community >> >> >> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user >> > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user > > > __ Information from ESET Mail Security, version of virus > signature database 12220 (20150908) __ > > The message was checked by ESET Mail Security. > http://www.eset.com > > __ Information from ESET Mail Security, version of virus signature database 12220 (20150908) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] wms call responds with error
A few years ago, I set up a few wms servers from the Maine GIS office to download Maine airphotos. This always worked without problem but all of a sudden I get the following error WMS Provider Failed to download capabilities: Download of capabilities failed: Host mapserver.maine.gov not found. Mapserver.maine.gov is up and when I go to edit link the http:// is also there (other than in the error message) All the wms links do not work anymore including the non-maine.gov sites. I now updated to Pisa and it is still giving the same error message. Anyone knows what's going on? Thanks for any help Jake And thank you for being such a fantastic community ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] toolbar handle off screen
Yes that worked. Thank you Junior Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Junior Delaz Sent: Tuesday, December 16, 2014 4:06 AM To: Nicolas Cadieux Cc: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] toolbar handle off screen Hi, In latest releases of QGIS, there is a button in menu Settings OptionsSystem QSettings Reset that might reset your GUI to its default status. Try it before removing anything. 2014-12-16 2:05 GMT+01:00 Nicolas Cadieux nicolas.cadi...@archeotec.ca: Hi, Windows key + up arrow could help or turn QGIS on an off. You could also turn off the toolbar (right click in empty area of the toolbars and you should see a menu). If your GUI is really messed up, you could remove the registry keys for QGIS. This will reset QGIS to the defaults. Look on the net and you will find how to do that. Nicolas Cadieux M.Sc. Les Entreprises Archéotec inc. 8548, rue Saint-Denis Montréal H2P 2H2 Téléphone: 514.381.5112 Fax: 514.381.4995 Le 2014-12-15 19:56, Jake Maier [via OSGeo.org] [hidden email] http://user/SendEmail.jtp?type=nodenode=5177962i=0 a écrit : I wanted to move the attribute toolbar to a different docked location but my finger slipped somehow and now the toolbar is only half visible, and the handle to move the bar is off screen and not selectable. What can I do to get the bar back to the docked location I wanted to move it in the first place. Thankful for help Jake ___ Qgis-user mailing list [hidden email] http://user/SendEmail.jtp?type=nodenode=5177961i=0 http://lists.osgeo.org/mailman/listinfo/qgis-user _ If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1560.x6.nabble.com/toolbar-handle-off-screen-tp5177961.html To start a new topic under Quantum GIS - User, email [hidden email] http://user/SendEmail.jtp?type=nodenode=5177962i=1 To unsubscribe from Quantum GIS - User, click here. http://osgeo-org.1560.x6.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespacebreadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml NAML _ View this message in context: Re: toolbar handle off screen http://osgeo-org.1560.x6.nabble.com/toolbar-handle-off-screen-tp5177961p5177962.html Sent from the Quantum GIS - User mailing list archive http://osgeo-org.1560.x6.nabble.com/Quantum-GIS-User-f4125267.html at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Maine West (ft) projection
I received a shape file with a projection of Maine West (ft) On the fly transformation placed the property somewhere west of Brazil in the Atlantic Ocean. I checked all the projection and didn't find Maine West in qgis. How can I add it to the list of projections? What information do I need for that? Thanks for any pointers. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Maine West (ft) projection
Nicolas, you indirectly found the problem. I have the prj file, but for whatever reason qgis could not see it. I took the group of the 6 files and copied them all to the particular gis directory and ola it worked. Thank you all for helping. Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Nicolas Cadieux Sent: Tuesday, December 16, 2014 12:25 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] Maine West (ft) projection Hi, You should look for the .prj that should be with the .shp. If it's not there, your file was probably imported using the project CRS and that explains why it's in the wrong place... If the .prj is there, but not recongized in QGIS, it should have been imported as a User CRS. If you can't find it, or if it's wrong, google EPSG and proj4. You should find what you are looking for and then you can create a user CRS in QGIS. Nicolas Cadieux M.Sc. Les Entreprises Archéotec inc. 8548, rue Saint-Denis Montréal H2P 2H2 Téléphone: 514.381.5112 Fax: 514.381.4995 Le 2014-12-16 11:53, Jake Maier [via OSGeo.org] [hidden email] a écrit : I received a shape file with a projection of Maine West (ft) On the fly transformation placed the property somewhere west of Brazil in the Atlantic Ocean. I checked all the projection and didn’t find Maine West in qgis. How can I add it to the list of projections? What information do I need for that? Thanks for any pointers. Jake ___ Qgis-user mailing list [hidden email] http://lists.osgeo.org/mailman/listinfo/qgis-user _ If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1560.x6.nabble.com/Maine-West-ft-projection-tp5178063.html To start a new topic under Quantum GIS - User, email ml-node+[hidden email] To unsubscribe from Quantum GIS - User, click here. http://osgeo-org.1560.x6.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespacebreadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml NAML _ View this message in context: Re: Maine West (ft) projection http://osgeo-org.1560.x6.nabble.com/Maine-West-ft-projection-tp5178063p5178067.html Sent from the Quantum GIS - User mailing list archive http://osgeo-org.1560.x6.nabble.com/Quantum-GIS-User-f4125267.html at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] toolbar handle off screen
I wanted to move the attribute toolbar to a different docked location but my finger slipped somehow and now the toolbar is only half visible, and the handle to move the bar is off screen and not selectable. What can I do to get the bar back to the docked location I wanted to move it in the first place. Thankful for help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] reload WMS raster
Thank you Nicolas. I turned on the cash and this is already what I want to achive. But even better is the 300x300 tile size. Now if you or someone could explain what the 300x300 means. Is it meter, or pixels, or something totally different. Great. My problem is solved. I could bite my butt that I didn’t ask earlier J Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Nicolas Cadieux Sent: Sunday, December 14, 2014 12:58 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] reload WMS raster Hi, Specify a tile size like 300x300 in the wms setting. In your network option(Setting\options\network), you are able to increase the size of the cashe. I know the first option works, the second option not sure but I do it anyway... Use cache to speed up in the rendering options.(setting\option\rendering). Also, I usually have 2 wms layers at once. One with more layers (Slow), and one with only one layer like the road or water (fast). I keep only the second one on. When I am where I want to be, I turn on the first, more complex layer. Nicolas Cadieux M.Sc. Les Entreprises Archéotec inc. 8548, rue Saint-Denis Montréal H2P 2H2 Téléphone: 514.381.5112 Fax: 514.381.4995 Le 2014-12-13 19:34, Jake Maier [via OSGeo.org] [hidden email] a écrit : I mostly work with WMS raster files. Each time I change anything, turning on or off layers, editing layers etc, the WMS reloads the raster even if there is no change in the underlying data of the raster. I have a slow connection and it drives me crazy to wait each time I move vertices. I often use ‘save as image’ and load the image, but I already have too many of those temporary rasters and still I find myself using sections or magnification where the rasters I copied are insufficient. Is there a trick to speed up the process of editing the canvas without the WMS reloading? Thanks for any help Jake ___ Qgis-user mailing list [hidden email] http://lists.osgeo.org/mailman/listinfo/qgis-user If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1560.x6.nabble.com/reload-WMS-raster-tp5177790.html To start a new topic under Quantum GIS - User, email [hidden email] To unsubscribe from Quantum GIS - User, click here. NAML _ View this message in context: Re: reload WMS raster http://osgeo-org.1560.x6.nabble.com/reload-WMS-raster-tp5177790p5177795.html Sent from the Quantum GIS - User mailing list archive http://osgeo-org.1560.x6.nabble.com/Quantum-GIS-User-f4125267.html at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] reload WMS raster
I mostly work with WMS raster files. Each time I change anything, turning on or off layers, editing layers etc, the WMS reloads the raster even if there is no change in the underlying data of the raster. I have a slow connection and it drives me crazy to wait each time I move vertices. I often use 'save as image' and load the image, but I already have too many of those temporary rasters and still I find myself using sections or magnification where the rasters I copied are insufficient. Is there a trick to speed up the process of editing the canvas without the WMS reloading? Thanks for any help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] save as image
I don't quite understand it, but now it works. I found a xml file with the same name (who knows how that got there) and I deleted the jpg, xml and jpgw and started over and now it works Sorry about the noise jake From: Jake Maier [mailto:j...@jmforestry.com] Sent: Monday, December 01, 2014 6:16 PM To: 'qgis-user List' Subject: save as image In the past I could save an airphoto as an image and load it right back into qgis because of the world file. Now it seems not to work in qgis 2.6 on Windows 7 64. Did I something wrong or did I find a bug? The directory of the photo also contains the worldfile. Thanks for any hint Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] zoom to selection in 2.6
Redoute, you are absolutely right. Wouldn't any reasonable person think so? ;) Maybe not, anyway I will withdraw the bug report. Thanks Jake -Original Message- From: Redoute [mailto:redo...@tortenboxer.de] Sent: Thursday, November 20, 2014 3:53 AM To: Jake Maier; 'qgis-user List' Subject: Re: [Qgis-user] zoom to selection in 2.6 Am 20.11.2014 03:09, schrieb Jake Maier: Can someone please confirm that the zoom to selection in qgis 2.6 still zooms only to the first item in the selection Not confirmed. Zoom to Selection (Ctrl+J) adjusts the visible range so that all selected features on the current layer are visible together. It doesn't work for multiple layers at once, maybe this is what you expect? Redoute ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] zoom to selection in 2.6
Can someone please confirm that the zoom to selection in qgis 2.6 still zooms only to the first item in the selection Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Bouced email? FW: confirm 8802ec51899a042e58c6ed0b5fffaa9b29b39184
I got this email all of a sudden and have no idea really why, and what bounced, because I get all the list emails. Can someone please tell me what's going on here -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of qgis-user-requ...@lists.osgeo.org Sent: Monday, November 17, 2014 10:25 PM To: j...@jmforestry.com Subject: confirm 8802ec51899a042e58c6ed0b5fffaa9b29b39184 Your membership in the mailing list Qgis-user has been disabled due to excessive bounces The last bounce received from you was dated 17-Nov-2014. You will not get any more messages from this list until you re-enable your membership. You will receive 3 more reminders like this before your membership in the list is deleted. To re-enable your membership, you can simply respond to this message (leaving the Subject: line intact), or visit the confirmation page at http://lists.osgeo.org/mailman/confirm/qgis-user/8802ec51899a042e58c6ed0b5ff faa9b29b39184 You can also visit your membership page at http://lists.osgeo.org/mailman/options/qgis-user/j.m%40jmforestry.com On your membership page, you can change various delivery options such as your email address and whether you get digests or not. As a reminder, your membership password is Lenasita1 If you have any questions or problems, you can contact the list owner at qgis-user-ow...@lists.osgeo.org ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] zooming to several layers
Hi Jonathan I'm happy to report the bug. I get a lot of mileage out of qgis and it makes me feel good to give at least a little bit back. Thanks for the confirmation. Jake From: Jonathan Moules [mailto:j.mou...@hrwallingford.com] Sent: Wednesday, November 12, 2014 9:13 AM To: 'Jake Maier'; 'qgis-user List' Subject: RE: [Qgis-user] zooming to several layers Hi Jake, I remember encountering this a long time ago and am fairly sure I reported it or there was already a ticket. I've just re-tested and can confirm the behaviour hasn't been fixed in 2.6 either. L Unfortunately I can't seem to find it again (I don't have access to my account any more so can't simply look at my old ticket list; and google is failing me). Might be worth taking a look yourself, and if you can't find it, just report it again (maybe I'm mistaken about it being reported). Cheers, Jonathan From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: Wednesday, November 12, 2014 2:49 AM To: 'qgis-user List' Subject: [Qgis-user] zooming to several layers I am using QGIS 2.4.0 When I select several layers, let's say a number of adjacent boundary layers, and click on 'zoom to layers' in the right click menu, the program will only zoom to the first of the selected layers. Do I use that feature wrong, or is it a known bug? What should, can I do? Write a ticket? Thanks for any help Jake This message has been scanned for viruses by http://www.mailcontrol.com/ MailControl, a service from BlackSpider Technology Click here https://www.mailcontrol.com/sr/29PNZ2oK1k!GX2PQPOmvUizKrmxxhcEGwB04Kh+ypOBZ uEY7SU6Hn5fM1iyAeuy4DZBLv8O0BTSNc!rJiVGaJg== to report this email as spam. _ HR Wallingford and its subsidiaries uses faxes and emails for confidential and legally privileged business communications. They do not of themselves create legal commitments. Disclosure to parties other than addressees requires our specific consent. We are not liable for unauthorised disclosures nor reliance upon them. If you have received this message in error please advise us immediately and destroy all copies of it. HR Wallingford Limited Howbery Park, Wallingford, Oxfordshire, OX10 8BA, United Kingdom Registered in England No. 02562099 _ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] zooming to several layers
I am using QGIS 2.4.0 When I select several layers, let's say a number of adjacent boundary layers, and click on 'zoom to layers' in the right click menu, the program will only zoom to the first of the selected layers. Do I use that feature wrong, or is it a known bug? What should, can I do? Write a ticket? Thanks for any help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] loading layer style makes style invisible on canvas
Who can tell me please what a field in italics in the drop down menu for column in the style tab means. Thank you. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ramon Andiñach Sent: Friday, October 17, 2014 8:05 PM To: qgis-user List Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas On 18/10/2014, at 05:29 , Jake Maier wrote: Hi Everybody First of all, thank you all participants for this vital and first class listserv. I have a problem that looks like a bug but is so basic that I cant imagine that its broken. I have a joined layer of soils with the soil attributes in the joined database. I also have a saved style for wetness classes. When I classify the layer before I load the style sheet, I can display all the wetness classes with a random style attributed to each class and display the layer on the canvas. When I load the style for that layer and apply, nothing displays on the canvas even so I see the styles attributed correctly in the layer property window. I have no clue what may be the problem. Thanks for your help Jake Hi Jake, Could you check the field that the style apples to? (Because it sounds a lot like when I apply my saved style that works on the Au_ppb field to a layer with an Auppb field) Also, is the field you're classifying is in the joined table? Did the join work as expected? And, is this in QGIS 2.4? -ramon ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] loading layer style makes style invisible on canvas
Ramon, I forgot yes that is 2.4 and also in different weekly updates. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: Friday, October 17, 2014 8:26 PM To: 'qgis-user List' Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas Thank you for your response, Ramon I use a soilmart (government site) to download the soil polygons and the database data. soilmart is organized by county. In one county it works while in the other it does not work. I can see the join field in the style sheet in both counties. I can set it up in layer's properties exactly the same and it all looks identical until I apply the settings. Then one county displays the layer properly, in the other not at all. Again thank you for your kind response. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ramon Andiñach Sent: Friday, October 17, 2014 8:05 PM To: qgis-user List Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas On 18/10/2014, at 05:29 , Jake Maier wrote: Hi Everybody First of all, thank you all participants for this vital and first class listserv. I have a problem that looks like a bug but is so basic that I cant imagine that its broken. I have a joined layer of soils with the soil attributes in the joined database. I also have a saved style for wetness classes. When I classify the layer before I load the style sheet, I can display all the wetness classes with a random style attributed to each class and display the layer on the canvas. When I load the style for that layer and apply, nothing displays on the canvas even so I see the styles attributed correctly in the layer property window. I have no clue what may be the problem. Thanks for your help Jake Hi Jake, Could you check the field that the style apples to? (Because it sounds a lot like when I apply my saved style that works on the Au_ppb field to a layer with an Auppb field) Also, is the field you're classifying is in the joined table? Did the join work as expected? And, is this in QGIS 2.4? -ramon ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] loading layer style makes style invisible on canvas
-Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ramon Andiñach Sent: Friday, October 17, 2014 8:05 PM To: qgis-user List Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas On 18/10/2014, at 05:29 , Jake Maier wrote: Hi Everybody First of all, thank you all participants for this vital and first class listserv. I have a problem that looks like a bug but is so basic that I cant imagine that its broken. I have a joined layer of soils with the soil attributes in the joined database. I also have a saved style for wetness classes. When I classify the layer before I load the style sheet, I can display all the wetness classes with a random style attributed to each class and display the layer on the canvas. When I load the style for that layer and apply, nothing displays on the canvas even so I see the styles attributed correctly in the layer property window. I have no clue what may be the problem. Thanks for your help Jake Hi Jake, Could you check the field that the style apples to? (Because it sounds a lot like when I apply my saved style that works on the Au_ppb field to a layer with an Auppb field) Also, is the field you're classifying is in the joined table? Did the join work as expected? And, is this in QGIS 2.4? -ramon ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] loading layer style makes style invisible on canvas
Thank you for your response, Ramon I use a soilmart (government site) to download the soil polygons and the database data. soilmart is organized by county. In one county it works while in the other it does not work. I can see the join field in the style sheet in both counties. I can set it up in layer's properties exactly the same and it all looks identical until I apply the settings. Then one county displays the layer properly, in the other not at all. Again thank you for your kind response. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Ramon Andiñach Sent: Friday, October 17, 2014 8:05 PM To: qgis-user List Subject: Re: [Qgis-user] loading layer style makes style invisible on canvas On 18/10/2014, at 05:29 , Jake Maier wrote: Hi Everybody First of all, thank you all participants for this vital and first class listserv. I have a problem that looks like a bug but is so basic that I cant imagine that its broken. I have a joined layer of soils with the soil attributes in the joined database. I also have a saved style for wetness classes. When I classify the layer before I load the style sheet, I can display all the wetness classes with a random style attributed to each class and display the layer on the canvas. When I load the style for that layer and apply, nothing displays on the canvas even so I see the styles attributed correctly in the layer property window. I have no clue what may be the problem. Thanks for your help Jake Hi Jake, Could you check the field that the style apples to? (Because it sounds a lot like when I apply my saved style that works on the Au_ppb field to a layer with an Auppb field) Also, is the field you're classifying is in the joined table? Did the join work as expected? And, is this in QGIS 2.4? -ramon ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] broken plugins
I tried to get 2 plugins which returned the following errors. What should I do? Thanks Jake For the SaTSVis plugin I got the following message The plugin is broken. Python said: 'unicode'object has no attribute'toString' Couldn't load plugin DigitizingTools due an error when calling its classFactory() method Traceback (most recent call last): File C:/PROGRA~1/QGISCH~1/apps/qgis/./python\qgis\utils.py, line 204, in startPlugin plugins[packageName] = package.classFactory(iface) File C:/Users/Joachim/.qgis2/python/plugins\DigitizingTools\__init__.py, line 26, in classFactory from digitizingtools import DigitizingTools File C:/PROGRA~1/QGISCH~1/apps/qgis/./python\qgis\utils.py, line 454, in _import mod = _builtin_import(name, globals, locals, fromlist, level) File C:/Users/Joachim/.qgis2/python/plugins\DigitizingTools\digitizingtools.py, line 45, in import dtextractpart File C:/PROGRA~1/QGISCH~1/apps/qgis/./python\qgis\utils.py, line 454, in _import mod = _builtin_import(name, globals, locals, fromlist, level) File C:\Users\Joachim\.qgis2\python\plugins\DigitizingTools\tools\dtextractpart. py, line 25, in from dttools import DtSingleTool, DtSelectVertexTool ImportError: cannot import name DtSingleTool Python version: 2.7.5 (default, May 15 2013, 22:44:16) [MSC v.1500 64 bit (AMD64)] QGIS version: 2.4.0-Chugiak Chugiak, 8fdd08a Python path: ['C:/Users/Joachim/.qgis2/python/plugins\\processing', 'C:/PROGRA~1/QGISCH~1/apps/qgis/./python', u'C:/Users/Joachim/.qgis2/python', u'C:/Users/Joachim/.qgis2/python/plugins', 'C:/PROGRA~1/QGISCH~1/apps/qgis/./python/plugins', 'C:\\PROGRA~1\\QGISCH~1\\bin\\python27.zip', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\DLLs', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\plat-win', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\lib-tk', 'C:\\PROGRA~1\\QGISCH~1\\bin', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\PIL', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\jinja2-2.7.2-py 2.7.egg', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\markupsafe-0.23 -py2.7-win-amd64.egg', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\pytz-2012j-py2. 7.egg', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\win32', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\win32\\lib', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\Pythonwin', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\Shapely-1.2.18- py2.7-win-amd64.egg', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\six-1.3.0-py2.7 .egg', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\wx-2.8-msw-unic ode', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\xlrd-0.9.2-py2. 7.egg', 'C:\\PROGRA~1\\QGISCH~1\\apps\\Python27\\lib\\site-packages\\xlwt-0.7.5-py2. 7.egg', 'C:\\Users\\Joachim\\.qgis2\\python\\plugins\\DigitizingTools\\tools', 'C:\\PROGRA~1\\QGISCH~1\\apps\\qgis\\python\\plugins\\fTools\\tools', 'C:/Users/Jake.Jake-PC/Documents/Customer/Walker Pond/GIS', 'C:\\Users\\Joachim\\.qgis2\\python\\plugins\\DigitizingTools\\tools'] ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] misaligned openlayer corrects itself when panned
Hi, I have an issue with openlayer for quite some time meaning it was already in previous versions. I use now 2.2 master. When I open a Google image the first time, I see my layers correctly, but underneath are 6 or so maps of the total earth in a row I only need to pan a tiny bit and it will start correcting itself. Sometime it will be ok with the first pan (or zoom) and sometimes it will be off maybe 100 meters of so. A second pan will straighten everything out. I googled the problem and found one related but still different problem with Openlayers. Any ideas what's wrong, and what I should do? (Ticket?) Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] can't open file.qgs
Thanks Stefan, Brent and Alex. Renaming worked perfectly. File back in good working order. I should have known. I guess it was past my bedtime J Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Stefan Sylla Sent: Sunday, March 30, 2014 12:34 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] can't open file.qgs Hi Jake, from what I understand the file.qgs~ is a backup of your original file.qgs. I think you can still rescue your project by using the file.qgs~ Just rename it to your original file.qgs Hope that works out. Stefan On 30/03/2557 08:04, Jake Maier [via OSGeo.org] wrote: My computer crashed and now I cannot open a file anymore I was working with for the last 6 months The file.qgs has 0 bytes, but there is a file.qgs~ with 262Kb. J Can I get the file back and how, or do I need to start fresh? L Thanks for any help. I switched back from a weekly to Valmiera because I need a stabile environment. Now is that ironic or what? J Jake ___ Qgis-user mailing list [hidden email] http://lists.osgeo.org/mailman/listinfo/qgis-user _ If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1560.x6.nabble.com/can-t-open-file-qgs-tp5132071.html To unsubscribe from Quantum GIS - User, click here. http://osgeo-org.1560.x6.nabble.com/template/NamlServlet.jtp?macro=macro_vi ewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.Basic Namespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template. NodeNamespacebreadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_e mails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml NAML _ View this message in context: Re: can't open file.qgs http://osgeo-org.1560.x6.nabble.com/can-t-open-file-qgs-tp5132071p5132074.h tml Sent from the Quantum GIS - User mailing list archive http://osgeo-org.1560.x6.nabble.com/Quantum-GIS-User-f4125267.html at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] can't open file.qgs
My computer crashed and now I cannot open a file anymore I was working with for the last 6 months The file.qgs has 0 bytes, but there is a file.qgs~ with 262Kb. J Can I get the file back and how, or do I need to start fresh? L Thanks for any help. I switched back from a weekly to Valmiera because I need a stabile environment. Now is that ironic or what? J Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] FW: google map connector
I re-installed the plug-in and went back to qgis 2.2 still I get the following error I also seem not able to contact the developer (Google) Any idea what I should do? J https://www.google.com/ Google Error: invalid_client Bad request. Request Details From: Jake Maier [mailto:j...@jmforestry.com] Sent: Monday, March 03, 2014 6:05 PM To: 'Werner Macho' Cc: 'qgis-user' Subject: RE: [Qgis-user] google map connector Danke Werner No I didn’t contact anybody but the list so far. Yes, I will go back to 2.2 because that’s an important feature for me which I just discovered. Now should I do anything else short of writing the plug-in myself. Don’t have the know-how. I was not complaining at all. I am very happy with what the qgis team did and still is doing. It’s priceless not only for the gis community but beyond by giving an incredible example of what is possible parallel to the for profit world. Thanks very much Jake From: Werner Macho [mailto:werner.ma...@gmail.com] Sent: Monday, March 03, 2014 7:32 AM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] google map connector Hi! I think the same thing applies as for every plugin right now .. If you are using master you should be aware that a lot of changes already went into master (like multi-threaded-rendering) and some things changed so that plugins must be adopted to follow this changes .. As 2.3 is the master thing will not happen urgent .. You are on the development branch .. If you need plugins to work you should currently go back to 2.2 and look from time to time if plugins are already changed. (Or go change the plugin yourself and make a pull request) In your case have you tried contacting the author of the plugin? kind regards Werner On Mon, Mar 3, 2014 at 12:47 PM, Jake Maier j...@jmforestry.com wrote: I installed the google map connector and get the following error when trying to authenticate. I use 2.3.0 Master on Windows 7 prof. Is this a bug or did I do anything wrong? Thanks for your help Jake https://www.google.com/ Google Error: invalid_client Bad request. Request Details * cookie_policy_enforce=false * response_type=code * scope=https://www.googleapis.com/auth/mapsengine https://www.googleapis.com/auth/userinfo.profile * redirect_uri=urn:ietf:wg:oauth:2.0:oob * approval_prompt=auto * state=123456789 * client_id=j...@jmforestry.com Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user attachment: image001.gif ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] FW: google map connector
Thank you Werner and Nathan, Will do. Jake From: Werner Macho [mailto:werner.ma...@gmail.com] Sent: Tuesday, March 04, 2014 6:56 AM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] FW: google map connector Hi! As Nathan already said .. You can create an issue on the development page of the plugin https://github.com/googlemaps/mapsengine-qgis-connector I am sure the author will take a look once he has time .. kind regards Werner On Tue, Mar 4, 2014 at 12:20 PM, Jake Maier j...@jmforestry.com wrote: I re-installed the plug-in and went back to qgis 2.2 still I get the following error I also seem not able to contact the developer (Google) Any idea what I should do? J https://www.google.com/ Google Error: invalid_client Bad request. Request Details From: Jake Maier [mailto:j...@jmforestry.com] Sent: Monday, March 03, 2014 6:05 PM To: 'Werner Macho' Cc: 'qgis-user' Subject: RE: [Qgis-user] google map connector Danke Werner No I didn’t contact anybody but the list so far. Yes, I will go back to 2.2 because that’s an important feature for me which I just discovered. Now should I do anything else short of writing the plug-in myself. Don’t have the know-how. I was not complaining at all. I am very happy with what the qgis team did and still is doing. It’s priceless not only for the gis community but beyond by giving an incredible example of what is possible parallel to the for profit world. Thanks very much Jake From: Werner Macho [mailto:werner.ma...@gmail.com] Sent: Monday, March 03, 2014 7:32 AM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] google map connector Hi! I think the same thing applies as for every plugin right now .. If you are using master you should be aware that a lot of changes already went into master (like multi-threaded-rendering) and some things changed so that plugins must be adopted to follow this changes .. As 2.3 is the master thing will not happen urgent .. You are on the development branch .. If you need plugins to work you should currently go back to 2.2 and look from time to time if plugins are already changed. (Or go change the plugin yourself and make a pull request) In your case have you tried contacting the author of the plugin? kind regards Werner On Mon, Mar 3, 2014 at 12:47 PM, Jake Maier j...@jmforestry.com wrote: I installed the google map connector and get the following error when trying to authenticate. I use 2.3.0 Master on Windows 7 prof. Is this a bug or did I do anything wrong? Thanks for your help Jake https://www.google.com/ Google Error: invalid_client Bad request. Request Details * cookie_policy_enforce=false * response_type=code * scope=https://www.googleapis.com/auth/mapsengine https://www.googleapis.com/auth/userinfo.profile * redirect_uri=urn:ietf:wg:oauth:2.0:oob * approval_prompt=auto * state=123456789 * client_id=j...@jmforestry.com Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user attachment: image001.gif ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] google map connector
I installed the google map connector and get the following error when trying to authenticate. I use 2.3.0 Master on Windows 7 prof. Is this a bug or did I do anything wrong? Thanks for your help Jake https://www.google.com/ Google Error: invalid_client Bad request. Request Details * cookie_policy_enforce=false * response_type=code * scope=https://www.googleapis.com/auth/mapsengine https://www.googleapis.com/auth/userinfo.profile * redirect_uri=urn:ietf:wg:oauth:2.0:oob * approval_prompt=auto * state=123456789 * client_id=j...@jmforestry.com Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com attachment: image001.gif ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Great book for learning QGIS
I only can second it. Fantastic service thank you Anita Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Chrest, David Sent: Monday, March 03, 2014 9:58 AM To: qgis-user@lists.osgeo.org Subject: [Qgis-user] Great book for learning QGIS For folks new to GIS or QGIS in general, and it all seems overwhelming, Anita Graser's Learning QGIS 2.0 book is wonderful and will get you started in no time. Covers all the basics very well. Here blog is great too. David Chrest ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] google map connector
Danke Werner No I didn’t contact anybody but the list so far. Yes, I will go back to 2.2 because that’s an important feature for me which I just discovered. Now should I do anything else short of writing the plug-in myself. Don’t have the know-how. I was not complaining at all. I am very happy with what the qgis team did and still is doing. It’s priceless not only for the gis community but beyond by giving an incredible example of what is possible parallel to the for profit world. Thanks very much Jake From: Werner Macho [mailto:werner.ma...@gmail.com] Sent: Monday, March 03, 2014 7:32 AM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] google map connector Hi! I think the same thing applies as for every plugin right now .. If you are using master you should be aware that a lot of changes already went into master (like multi-threaded-rendering) and some things changed so that plugins must be adopted to follow this changes .. As 2.3 is the master thing will not happen urgent .. You are on the development branch .. If you need plugins to work you should currently go back to 2.2 and look from time to time if plugins are already changed. (Or go change the plugin yourself and make a pull request) In your case have you tried contacting the author of the plugin? kind regards Werner On Mon, Mar 3, 2014 at 12:47 PM, Jake Maier j...@jmforestry.com wrote: I installed the google map connector and get the following error when trying to authenticate. I use 2.3.0 Master on Windows 7 prof. Is this a bug or did I do anything wrong? Thanks for your help Jake https://www.google.com/ Google Error: invalid_client Bad request. Request Details * cookie_policy_enforce=false * response_type=code * scope=https://www.googleapis.com/auth/mapsengine https://www.googleapis.com/auth/userinfo.profile * redirect_uri=urn:ietf:wg:oauth:2.0:oob * approval_prompt=auto * state=123456789 * client_id=j...@jmforestry.com Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user attachment: image001.gif ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] google map connector
The author of the plug-in is Google. Just wanted to contact the author, but I don’t think google will read my message. J Jake From: Werner Macho [mailto:werner.ma...@gmail.com] Sent: Monday, March 03, 2014 7:32 AM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] google map connector Hi! I think the same thing applies as for every plugin right now .. If you are using master you should be aware that a lot of changes already went into master (like multi-threaded-rendering) and some things changed so that plugins must be adopted to follow this changes .. As 2.3 is the master thing will not happen urgent .. You are on the development branch .. If you need plugins to work you should currently go back to 2.2 and look from time to time if plugins are already changed. (Or go change the plugin yourself and make a pull request) In your case have you tried contacting the author of the plugin? kind regards Werner On Mon, Mar 3, 2014 at 12:47 PM, Jake Maier j...@jmforestry.com wrote: I installed the google map connector and get the following error when trying to authenticate. I use 2.3.0 Master on Windows 7 prof. Is this a bug or did I do anything wrong? Thanks for your help Jake https://www.google.com/ Google Error: invalid_client Bad request. Request Details * cookie_policy_enforce=false * response_type=code * scope=https://www.googleapis.com/auth/mapsengine https://www.googleapis.com/auth/userinfo.profile * redirect_uri=urn:ietf:wg:oauth:2.0:oob * approval_prompt=auto * state=123456789 * client_id=j...@jmforestry.com Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user attachment: image001.gif ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] openlayer layer 300ft to north northeast sometimes
I just read the issue 6822 In my experience it sometimes works ok and then again it misbehaves. The misbehaving is not consistent either, meaning is misaligns in different ways. Bing satellite I just checked also misbehaves and I get the total earth displayed on about 20 acres. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Andre Joost Sent: Saturday, February 15, 2014 12:53 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] openlayer layer 300ft to north northeast sometimes Am 15.02.2014 01:50, schrieb Jake Maier: The openlayer layer at times displays its Google satellite raster at incorrect locations. It happened that a band of 4 or 5 earths displayed over the screen. At other times the magnification was correct but 300 feet off. I use 2/10 version of 2.1 This might be a known but unresolved error: http://hub.qgis.org/issues/6822 Greetings, André Joost ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] edit polygon point jumps uncontrollably
Loading the newest version did solve the problem Thank you very much Jake From: Olivier Dalang [mailto:olivier.dal...@gmail.com] Sent: Thursday, February 13, 2014 4:10 PM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably Are you using the latest build ? I had similar problems a few days ago, but now it seems it has been resolved... 2014-02-13 21:08 GMT+01:00 Jake Maier j...@jmforestry.com: I just loaded the same file into 2.0.1 and no problem moving the point around. Before I tried whatever I could think of and it did not work but put the point way off into the distance. Any suggestions? Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Paolo Cavallini Sent: Thursday, February 13, 2014 1:24 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably Il 12/02/2014 17:43, Jake Maier ha scritto: In 2.1 master, when I edit a polygon layer I can move a point to the location I intend but as soon as I release the mouse button, the point jumps outside of the canvas, and sometime way outside meaning the lines to the point are about parallel. I had this behavior occasionally also with previous versions of QGIS but now in 2.1 it seems persistent. What can I do? UNconfirmed here. Silly question: Have you checked you do not have a too large snapping (e.g. in degees)? all the best. -- Paolo Cavallini - www.faunalia.eu QGIS PostGIS courses: http://www.faunalia.eu/training.html ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] docking snapping options
I tried to dock the snapping options and went to settings/options/digitizing/snapping and checked 'open snapping options in a dock window' I restarted qgis but the snapping option window still was undocked. I just installed the 2/10 version of the 64 bit weekly. I did not find a ticket. What should I do. Jake Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] openlayer layer 300ft to north northeast sometimes
The openlayer layer at times displays its Google satellite raster at incorrect locations. It happened that a band of 4 or 5 earths displayed over the screen. At other times the magnification was correct but 300 feet off. I use 2/10 version of 2.1 Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] edit polygon point jumps uncontrollably
Paolo and Bernhard I think you may be onto something here. I have a fairly good general idea about the projection issues, but don't have a firm grasp on the specifics. I try always to keep everything in nad83 UTM zone 19, have on the fly enabled, and then hope for the best. Now once in a while I had problems with wms files from MEGIS, the GIS of Maine, in the past too, I'm not sure anymore about the specifics, but lately everything went fine downloading and using wms files, except once in a while the problem with the jumping points within polygons. So far I could get it to behave again, by playing around with it a bit. But now this time (I think since 2.1) it will only misbehave and so far I could not find the problem nor could I get it to behave a single time. Thanks again very much for your help and pointers. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Thursday, February 13, 2014 1:53 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably Hi Jake, just guessing: is it a projection problem, i.e. doe the projection of the layer and the project differ? Bernhard Am 12.02.2014 17:43, schrieb Jake Maier: Hi again Now I have another more serious problem. In 2.1 master, when I edit a polygon layer I can move a point to the location I intend but as soon as I release the mouse button, the point jumps outside of the canvas, and sometime way outside meaning the lines to the point are about parallel. I had this behavior occasionally also with previous versions of QGIS but now in 2.1 it seems persistent. What can I do? Thanks Jake __ Information from ESET Mail Security, version of virus signature database 9416 (20140212) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] edit polygon point jumps uncontrollably
I just loaded the same file into 2.0.1 and no problem moving the point around. Before I tried whatever I could think of and it did not work but put the point way off into the distance. Any suggestions? Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Paolo Cavallini Sent: Thursday, February 13, 2014 1:24 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably Il 12/02/2014 17:43, Jake Maier ha scritto: In 2.1 master, when I edit a polygon layer I can move a point to the location I intend but as soon as I release the mouse button, the point jumps outside of the canvas, and sometime way outside meaning the lines to the point are about parallel. I had this behavior occasionally also with previous versions of QGIS but now in 2.1 it seems persistent. What can I do? UNconfirmed here. Silly question: Have you checked you do not have a too large snapping (e.g. in degees)? all the best. -- Paolo Cavallini - www.faunalia.eu QGIS PostGIS courses: http://www.faunalia.eu/training.html ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] edit polygon point jumps uncontrollably
Ooops now I see the 2/10 version. Don’t know why I till now never saw it. I hope installing it will solve the problem. Jake From: Olivier Dalang [mailto:olivier.dal...@gmail.com] Sent: Thursday, February 13, 2014 4:10 PM To: Jake Maier Cc: qgis-user Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably Are you using the latest build ? I had similar problems a few days ago, but now it seems it has been resolved... 2014-02-13 21:08 GMT+01:00 Jake Maier j...@jmforestry.com: I just loaded the same file into 2.0.1 and no problem moving the point around. Before I tried whatever I could think of and it did not work but put the point way off into the distance. Any suggestions? Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Paolo Cavallini Sent: Thursday, February 13, 2014 1:24 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] edit polygon point jumps uncontrollably Il 12/02/2014 17:43, Jake Maier ha scritto: In 2.1 master, when I edit a polygon layer I can move a point to the location I intend but as soon as I release the mouse button, the point jumps outside of the canvas, and sometime way outside meaning the lines to the point are about parallel. I had this behavior occasionally also with previous versions of QGIS but now in 2.1 it seems persistent. What can I do? UNconfirmed here. Silly question: Have you checked you do not have a too large snapping (e.g. in degees)? all the best. -- Paolo Cavallini - www.faunalia.eu QGIS PostGIS courses: http://www.faunalia.eu/training.html ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Saber, thanks for your answer. What do you mean with a plugin layer I had a openlayer google layer loaded but only on this last incident Before it also happened without an openlayer layer loaded Jake -Original Message- From: Saber Razmjooei [mailto:saber.razmjo...@lutraconsulting.co.uk] Sent: Wednesday, February 12, 2014 4:14 AM To: 'Jake Maier'; 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: RE: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Do you happen to have a plugin layer loaded? For me it happens more often if I have a plugin layer loaded. Cheers, Saber -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: 11 February 2014 15:42 To: 'Hayashi Reiko'; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up Thank you Reiko I checked and the drawing order is checked. I normally don't change that, but who knows. I'll keep an eye on it. Unfortunately, I can't reproduce it, so I have to wait till it happens again. Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hayashi Reiko Sent: Tuesday, February 11, 2014 9:37 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I had the same problem, but found out that there is a checkbox Update drawing order at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan mikef...@att.net: I suspect you are familiar with layer drawing order. If not, drag different layers that display in the Layers box on the left side to the top of the list. If that is not the problem what is your OS and QGIS version number? Mike On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: Date: Sun, 9 Feb 2014 20:00:13 -0500 From: Jake Maierj...@jmforestry.com To:qgis-user@lists.osgeo.org Subject: [Qgis-user] layers have sometimes have to be turned on and off and on again to show up Message-ID:01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com Content-Type: text/plain; charset=us-ascii Since qgis 1.8, I sometimes have to turn layers on and off and on again, sometime 3 or 4 times, to make them show on the canvas. This is not a consistent problem Does anyone know what the problem may be? Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Whilst reasonable care has been taken to avoid virus transmission, no responsibility for viruses is taken and it is your responsibility to carry out such checks as you feel appropriate. If this email contains a quote or offer to sell products, carry out work or perform services then our standard terms and conditions (which can be found at http://www.lutraconsulting.co.uk/downloads/Lutra%20Consulting%20Standard%20Terms%20and%20Conditions.pdf shall apply unless explicitly stated otherwise. Saber Razmjooei and Peter Wells trading as Lutra Consulting. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] edit polygon point jumps uncontrollably
Hi again Now I have another more serious problem. In 2.1 master, when I edit a polygon layer I can move a point to the location I intend but as soon as I release the mouse button, the point jumps outside of the canvas, and sometime way outside meaning the lines to the point are about parallel. I had this behavior occasionally also with previous versions of QGIS but now in 2.1 it seems persistent. What can I do? Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Thank you Reiko I checked and the drawing order is checked. I normally don't change that, but who knows. I'll keep an eye on it. Unfortunately, I can't reproduce it, so I have to wait till it happens again. Thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Hayashi Reiko Sent: Tuesday, February 11, 2014 9:37 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up I had the same problem, but found out that there is a checkbox Update drawing order at the bottom of the context menu which shows up by right-clicking the layer in layers tab. My problem was solved by checking this box. I wonder if I am responding to your question... * 林玲子 Reiko Hayashi 2014-02-11 22:31 GMT+09:00 Mike Flannigan mikef...@att.net: I suspect you are familiar with layer drawing order. If not, drag different layers that display in the Layers box on the left side to the top of the list. If that is not the problem what is your OS and QGIS version number? Mike On 2/10/2014 9:29 AM, qgis-user-requ...@lists.osgeo.org wrote: Date: Sun, 9 Feb 2014 20:00:13 -0500 From: Jake Maierj...@jmforestry.com To:qgis-user@lists.osgeo.org Subject: [Qgis-user] layers have sometimes have to be turned on and off and on again to show up Message-ID:01a001cf25fb$753b8e10$5fb2aa30$@m...@jmforestry.com Content-Type: text/plain; charset=us-ascii Since qgis 1.8, I sometimes have to turn layers on and off and on again, sometime 3 or 4 times, to make them show on the canvas. This is not a consistent problem Does anyone know what the problem may be? Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up
Don, I run the 64 bit version. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Saulteau Don Sent: Tuesday, February 11, 2014 6:32 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] layers have sometimes have to be turned on and, off and on again to show up On 2/11/2014 8:01 AM, Anita Graser wrote: I've seen this happen as well. I think it happens both on Windows and Ubuntu - but certainly on Ubuntu. The issue seems to appear when you change a layer's visibility in the layer list while the map is still being rendered. QGIS ignores the change you do while the map is rendering and thus the user can end up with layers which are deactivated in the layer list, but still drawn in the map. To fix it, the user has to enable and disable the layer again. If someone can confirm this in master, we should open a ticket. Best wishes, Anita http://hub.qgis.org/issues/8231 Closed as invalid. I've got fresh installs of QGIS with this same rendering issue. I think this ticket needs to be re-opened. Note 10 in that ticket (http://hub.qgis.org/issues/8231#note-10) describes: The problem only occurs when the Improved Polygon Capturing plug-in is enabled in the 32-bit version and there are PostGIS layers in the document - a fairly unique situation, which explains why it wasn't occurring for you. We will simply disable this plugin when not being used, and your help troubleshooting is much appreciated. Hopefully this plugin can be fixed by its creator so other users don't have the same issue. Thanks again! But I'm not sure if that's the cause. I've been sporting spatialite for a while now =) Donovan ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] layers have sometimes have to be turned on and off and on again to show up
Since qgis 1.8, I sometimes have to turn layers on and off and on again, sometime 3 or 4 times, to make them show on the canvas. This is not a consistent problem Does anyone know what the problem may be? Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Joining with Multiple Locations per Person
Person A is linked to New York City, Person B is linked to New York City, therefore Person A is linked to Person B. Yes, however Person A and B also have 50 other locations that need to be checked against each other. The data might say NY, NYC, or NY City or New York, NY and other variations, geocoding allows for the different ways a locations is represented I do not want to rely on how others spell their locations and I need to share them on a map. Isn't that relatively easy to fix by creating a new field, and assigning the correct attribute by location, namely nyc or whatever name you choose? Wouldn't that make things much easier Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Lee Hachadoorian Sent: Monday, November 18, 2013 1:10 AM To: Sasa Sullivan; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] Joining with Multiple Locations per Person On 11/17/2013 03:34 PM, Sasa Sullivan wrote: Hi Lee, Hopefully I can be a bit clearer here, if not please do not hesitate to let me know, either on this post or to my email, I have tried to search online and the help functions for similar questions and responses before I posted to this board. Your questions/statements in bold text. But I could be misunderstanding your intention. Some more detail would be helpful. The people concerned have been matched to each other via DNA, their mission is to find the most recent common ancestors, this by looking at genealogical data which consists of surnames and locations. I don't want to include the questions about DNA as that is another matter and once I can find answers to this question I can probably answer that one myself. What is a record in you data? A record consists of one person with multiple geographical locations and surnames who need to find a common location(s)/surname(s) with other people who also have multiple geographical locations and surnames (some small groups of people are linked to each other as well). There is never just one surname and/or location per person This seems to be outside the standard GIS model where an entity has one location (really one geometry) and a fixed number of clearly defined attribute columns. Your entities have a variable number of locations, and perhaps a variable number of attribute columns (the surnames) as well. Possibly this has some similarity to an animal tracking model, where each animal has multiple timepoints, and you might ask where two animals crossed paths. But I am not very familiar with this field and don't know how easy it would be to implement in QGIS or any other tool. What location data do you have per person? Each person's location numbers are varied, from four minimum to close to a hundred At a guess, this is something that can be done without any spatial data, i.e. Geocoding will work best as it does not rely on spellings with are too varied Person A is linked to New York City, Person B is linked to New York City, therefore Person A is linked to Person B. Yes, however Person A and B also have 50 other locations that need to be checked against each other. The data might say NY, NYC, or NY City or New York, NY and other variations, geocoding allows for the different ways a locations is represented I do not want to rely on how others spell their locations and I need to share them on a map. Initially the people are linked to each other on one or more chromosomes, I can sort that in Excel. There might be another type of programs that can handle my questions however I do not know of any names, then I can transfer the results into QGIS. This is something I would tend to do in pure SQL. I do not know much about programming, beyond what someone directs me to do and was hoping the query functions of QGIS would handle what I was asking, if this were a one to one comparison I could do it in Excel or a database program, ultimately I need to put the information on a map Thank you so much for responding, I don't know of a beginners list to ask these questions. As I write this perhaps I can geocode and let Excel query the latitude and longitude for my matches. Possibly the geocoder outputs some other identifying field like a standardized name, code, or some unique ID. In which case you could search for matches on that field, rather than lat-long. One thing that might make this easier is to think of a person_ancestry_locations table with a person ID and a location (standardized name or code) field, where each person has one record for each location they are associated with. But I can't think of a way to do this in QGIS that isn't incredibly contorted. I would probably just use QGIS for the final mapping of common locations. Best, --Lee -- Lee Hachadoorian Assistant Professor in Geography, Dartmouth College http://freecity.commons.gc.cuny.edu ___ Qgis-user mailing list
[Qgis-user] disappearing shape layer
Actually the layer itself is not disappearing. It just will not display. I open the attribute table, there is a 125 acre polygon I select zoom to layer and it displays the right area I turn it on and off and on again several times it will not display a polygon I look into the properties/style and everything look OK (as far as I know, that is) I don't know how I can get the layer to display again Does anybody have an idea? On a related item, when I turn on a layer, it often will only display a check on the layer but will not display the layer. After I turn the layer off and on again, it will normally display. Thanks for any help Jake Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] disappearing shape layer
Sorry I forgot, I'm using 2.0.1 last updated about a month ago on a PC Win7 From: Jake Maier [mailto:j...@jmforestry.com] Sent: Tuesday, November 05, 2013 4:54 PM To: 'Qgis-user@lists.osgeo.org' Subject: disappearing shape layer Actually the layer itself is not disappearing. It just will not display. I open the attribute table, there is a 125 acre polygon I select zoom to layer and it displays the right area I turn it on and off and on again several times it will not display a polygon I look into the properties/style and everything look OK (as far as I know, that is) I don't know how I can get the layer to display again Does anybody have an idea? On a related item, when I turn on a layer, it often will only display a check on the layer but will not display the layer. After I turn the layer off and on again, it will normally display. Thanks for any help Jake Jake Maier 6 Lower Falls Road Orland ME 04472 469 0231 j...@jmforestry.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] FW: [Qgis-psc] donate link in help menu
+2 Real good idea J Proud and thankful user of qgis Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Lene Fischer Sent: Wednesday, October 02, 2013 9:04 AM Cc: qgis-psc; qgis-developer; qgis-user Subject: Re: [Qgis-user] [Qgis-psc] donate link in help menu +1 Regard Lene Fischer _ Fra: qgis-user-boun...@lists.osgeo.org [qgis-user-boun...@lists.osgeo.org] på vegne af Nathan Woodrow [madman...@gmail.com] Sendt: 2. oktober 2013 14:26 Til: Marco Bernasocchi Cc: qgis-psc; qgis-developer; qgis-user Emne: Re: [Qgis-user] [Qgis-psc] donate link in help menu +1 this is a good idea. - Nathan On Wed, Oct 2, 2013 at 10:23 PM, Marco Bernasocchi ma...@bernawebdesign.ch wrote: hi all, sorry for crossposting but i think different groups could have different feelings on this. I was wondering, we are looking into how we could get more donations to qgis. how would you feel about adding a donate link in the help menu (like after qgis website)? the link could then point to a qgis.org page with all possible payments backends we want to support or point directly to paypal or similar. i think this would give us a very simple/visible way to donate ciao Marco Bernasocchi (mobile) http://opengis.ch ___ Qgis-psc mailing list qgis-...@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-psc ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] jpg display as colored stripes in 2.0.1
I just downloaded version 2.0.1. The program loaded fast and smooth until it was time to load the aerial photos. They only displayed as colored stripes across the screen. I downloaded the photos again from the web (those displayed alright) and saved them as jpg, but again they came up only as colored stripes. Any idea what went wrong? Thanks for any pointer. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Where are stored the buttons images?
Maybe you can also use the Windows snipping tool to copy the image directly from the program. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Richard Duivenvoorde Sent: Friday, September 13, 2013 6:35 AM To: Luisa Peña Cc: Qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] Where are stored the buttons images? On 13-09-13 10:41, Luisa Peña wrote: Dear all, I have installed QGIS with OSGEO4W and I would like to know where are stored the QGIS buttons images (I'm creating a small manual for a few students and I need to place the images of the buttons in the document= I think you search these: https://github.com/qgis/Quantum-GIS/tree/master/images/themes/default Regards, Richard ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] plugin update
I tried to update the classification plugin and got the following error The version now installed is 2.1.1 I use windows 7 prof. and use the QGIS 2.0. I last updated QGIS a month or 2 ago. What should I do? Thanks for any help Jake Couldn't load plugin SemiAutomaticClassificationPlugin due an error when calling its classFactory() method Traceback (most recent call last): File C:/Program Files (x86)/QGIS Weekly/apps/qgis-dev/./python\qgis\utils.py, line 204, in startPlugin plugins[packageName] = package.classFactory(iface) File C:\Users\Joachim/.qgis2/python/plugins\SemiAutomaticClassificationPlugin\__ init__.py, line 65, in classFactory from semiautomaticclassificationplugin import SemiAutomaticClassificationPlugin File C:/Program Files (x86)/QGIS Weekly/apps/qgis-dev/./python\qgis\utils.py, line 453, in _import mod = _builtin_import(name, globals, locals, fromlist, level) File C:\Users\Joachim/.qgis2/python/plugins\SemiAutomaticClassificationPlugin\se miautomaticclassificationplugin.py, line 54, in import processing File C:/Program Files (x86)/QGIS Weekly/apps/qgis-dev/./python\qgis\utils.py, line 453, in _import mod = _builtin_import(name, globals, locals, fromlist, level) ImportError: No module named processing Python version: 2.7.4 (default, Apr 6 2013, 19:54:46) [MSC v.1500 32 bit (Intel)] QGIS version: 1.9.0-Master Master, d61cb25 Python path: ['C:/Program Files (x86)/QGIS Weekly/apps/qgis-dev/./python/plugins\\sextante', 'C:/Program Files (x86)/QGIS Weekly/apps/qgis-dev/./python', 'C:\\Users\\Joachim/.qgis2/python', 'C:\\Users\\Joachim/.qgis2/python/plugins', 'C:/Program Files (x86)/QGIS Weekly/apps/qgis-dev/./python/plugins', 'C:\\Program Files (x86)\\QGIS Weekly\\bin\\python27.zip', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\DLLs', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\plat-win', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\lib-tk', 'C:\\Program Files (x86)\\QGIS Weekly\\bin', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\site-packages', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\site-packages\\PIL', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\site-packages\\win32', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\site-packages\\win32\\lib', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\site-packages\\Pythonwin', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\Python27\\lib\\site-packages\\wx-2.8-msw-unicode', 'C:\\Users\\Joachim\\.qgis2\\python\\plugins\\DigitizingTools\\tools', 'C:\\Program Files (x86)\\QGIS Weekly\\apps\\qgis-dev\\python\\plugins\\fTools\\tools', 'C:/Users/Jake.Jake-PC/Documents/Customer/MAHLER/GIS'] ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] qgis extremely slow with shapefiles
I just switched to 2.0 and like the improvements very much. First all went very well, but now working with an 1.8 file saved as 2.0 file the processing of vector layers is excruciately slow. Entering a new node or point takes minutes and I always get a message Error, latitude or longitude exceeded limits. I'm here in Maine and everything is in UTM 19 N. I don't understand why I get particularly this error message. Does anyone have an idea what the problem is? Thanks very much for your help. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] qgis extremely slow with shapefiles
I did find the error. Sorry for the noise. I had still one layer in a wrong crs Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Jake Maier Sent: Wednesday, July 10, 2013 7:41 PM To: qgis-user@lists.osgeo.org Subject: [Qgis-user] qgis extremely slow with shapefiles I just switched to 2.0 and like the improvements very much. First all went very well, but now working with an 1.8 file saved as 2.0 file the processing of vector layers is excruciately slow. Entering a new node or point takes minutes and I always get a message Error, latitude or longitude exceeded limits. I'm here in Maine and everything is in UTM 19 N. I don't understand why I get particularly this error message. Does anyone have an idea what the problem is? Thanks very much for your help. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] polygon segment
I want to create a new polygon and in one area it should follow the segments of another polygon . (I have a forest and want to delineate the stands.) Which plug-in can I use to tell the program that from here to there it should just follow an existing polygon either in the same shapefile (stands) or possibly in another shapefile (boundaries) Thank you for your help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] cut several segments into a polygon
How can I create a polygon with several areas cut out. The cut out areas are all contained in polygons of the same shape file. I have a large forest stand and contained in it are many smaller stands. Thank you for your help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] cut several segments into a polygon
Hi Bernhard, Thanks for your help, but I'm still on 1.8 and frankly I can't find the place to download 2.0 for windows. I googled it several times, trying to find the nightlies, but I seem to get old, slow, and feeble. I so far was not able to get 2.0 for windows 7. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, July 09, 2013 9:47 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] cut several segments into a polygon Hi Jake, I had a plugin in preparation that amongst others does exactly what you want: within an editing session cut out from polygons in editable theme with selected polygons from another theme. The plugin is called DigitizingTools and is planned to contain more tools in the future. I uploaded it to the plugin repository just now, feel free to give it a try and report any problems. It is marked as experimental (because it is not well tested right now) and only works with current master (aka QGIS 2). Bernhard Am 09.07.2013 15:11, schrieb Randal Hale: Hey Jake, Here's how I typically add a cut to an existing stand (or depending on who you stand in front of - regeneration cut or clear cut). 1. Select all of your clearcuts in the stand. 2. IN the QGIS menu go to Vector - geoprocessing - difference 3. Both the input and the difference layer will be the name of your shapefile with the stand in it. 4. Uncheck Use only selected features under Input Vector Layer 5. Make sure Use only selected features is checked under difference layer 6. Create an output shapefile and run. You should have a new stand with multiple holes cut into it so you get the right acreage. Randy On Tue, Jul 9, 2013 at 7:42 AM, Jake Maier j...@jmforestry.com mailto:j...@jmforestry.com wrote: How can I create a polygon with several areas cut out. The cut out areas are all contained in polygons of the same shape file. I have a large forest stand and contained in it are many smaller stands. Thank you for your help Jake __ __ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org mailto:Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- Randal Hale, GISP North River Geographic Systems, Inc http://www.northrivergeographic.com 423.653.3611 rjh...@northrivergeographic.com mailto:rjh...@northrivergeographic.com twitter:rjhale http://about.me/rjhale __ Information from ESET Mail Security, version of virus signature database 8545 (20130709) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] cut several segments into a polygon
Thanks Raymond and Bernhard I have a last question, what is the story of the md5sum. Do I also need to download it? What is that file for? Thanks again very much Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Raymond Nijssen Sent: Tuesday, July 09, 2013 11:11 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] cut several segments into a polygon Jake, It's still called 1.9 and you can download it here: http://qgis.org/downloads/weekly/ Raymond On 09-07-13 17:07, Jake Maier wrote: Hi Bernhard, Thanks for your help, but I'm still on 1.8 and frankly I can't find the place to download 2.0 for windows. I googled it several times, trying to find the nightlies, but I seem to get old, slow, and feeble. I so far was not able to get 2.0 for windows 7. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, July 09, 2013 9:47 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] cut several segments into a polygon Hi Jake, I had a plugin in preparation that amongst others does exactly what you want: within an editing session cut out from polygons in editable theme with selected polygons from another theme. The plugin is called DigitizingTools and is planned to contain more tools in the future. I uploaded it to the plugin repository just now, feel free to give it a try and report any problems. It is marked as experimental (because it is not well tested right now) and only works with current master (aka QGIS 2). Bernhard Am 09.07.2013 15:11, schrieb Randal Hale: Hey Jake, Here's how I typically add a cut to an existing stand (or depending on who you stand in front of - regeneration cut or clear cut). 1. Select all of your clearcuts in the stand. 2. IN the QGIS menu go to Vector - geoprocessing - difference 3. Both the input and the difference layer will be the name of your shapefile with the stand in it. 4. Uncheck Use only selected features under Input Vector Layer 5. Make sure Use only selected features is checked under difference layer 6. Create an output shapefile and run. You should have a new stand with multiple holes cut into it so you get the right acreage. Randy On Tue, Jul 9, 2013 at 7:42 AM, Jake Maier j...@jmforestry.com mailto:j...@jmforestry.com wrote: How can I create a polygon with several areas cut out. The cut out areas are all contained in polygons of the same shape file. I have a large forest stand and contained in it are many smaller stands. Thank you for your help Jake __ __ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org mailto:Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- Randal Hale, GISP North River Geographic Systems, Inc http://www.northrivergeographic.com 423.653.3611 rjh...@northrivergeographic.com mailto:rjh...@northrivergeographic.com twitter:rjhale http://about.me/rjhale __ Information from ESET Mail Security, version of virus signature database 8545 (20130709) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- Terglobo Ampèrestraat 110 5223 CT 's-Hertogenbosch 06-25314983 ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] cut several segments into a polygon
Thank you Randy, I did have some trouble with the difference plugin in so far as it seems not to cut holes into the layer, but instead give me the individual parts. I'm not sure what I may have done wrong. Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Bernhard Ströbl Sent: Tuesday, July 09, 2013 9:47 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] cut several segments into a polygon Hi Jake, I had a plugin in preparation that amongst others does exactly what you want: within an editing session cut out from polygons in editable theme with selected polygons from another theme. The plugin is called DigitizingTools and is planned to contain more tools in the future. I uploaded it to the plugin repository just now, feel free to give it a try and report any problems. It is marked as experimental (because it is not well tested right now) and only works with current master (aka QGIS 2). Bernhard Am 09.07.2013 15:11, schrieb Randal Hale: Hey Jake, Here's how I typically add a cut to an existing stand (or depending on who you stand in front of - regeneration cut or clear cut). 1. Select all of your clearcuts in the stand. 2. IN the QGIS menu go to Vector - geoprocessing - difference 3. Both the input and the difference layer will be the name of your shapefile with the stand in it. 4. Uncheck Use only selected features under Input Vector Layer 5. Make sure Use only selected features is checked under difference layer 6. Create an output shapefile and run. You should have a new stand with multiple holes cut into it so you get the right acreage. Randy On Tue, Jul 9, 2013 at 7:42 AM, Jake Maier j...@jmforestry.com mailto:j...@jmforestry.com wrote: How can I create a polygon with several areas cut out. The cut out areas are all contained in polygons of the same shape file. I have a large forest stand and contained in it are many smaller stands. Thank you for your help Jake __ __ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org mailto:Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- Randal Hale, GISP North River Geographic Systems, Inc http://www.northrivergeographic.com 423.653.3611 rjh...@northrivergeographic.com mailto:rjh...@northrivergeographic.com twitter:rjhale http://about.me/rjhale __ Information from ESET Mail Security, version of virus signature database 8545 (20130709) __ The message was checked by ESET Mail Security. http://www.eset.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] red rectangle
I have a red rectangle on my canvas even when I deselect all layers How did it get there? How can I get rid of it? What is the function of it? I had it in qgis 1.8 and it is now also in the newly installed 2.0 Thanks for your help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] red rectangle
David, thanks for your suggestion, but if it's a plugin, it should show up in every project (file). It only is in one .qgs file, though it seems to be related to that file. Jake From: David J. Bakeman [mailto:dbake...@comcast.net] Sent: Tuesday, July 09, 2013 1:40 PM To: Jake Maier Cc: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] red rectangle On 07/09/2013 09:51 AM, Jake Maier wrote: I have a red rectangle on my canvas even when I deselect all layers How did it get there? How can I get rid of it? What is the function of it? I had it in qgis 1.8 and it is now also in the newly installed 2.0 Thanks for your help Perhaps it's a plugin? I noticed a red cross after I installed zoom to coordinates plugin and the only way to get rid of it was to uninstall the plugin but I ignore it because the plugin is so useful! Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] red rectangle
I think you hit the nail on its head. I just started to look into GRASS still not really knowing what it's adding to qgis. But it must be GRASS Thanks Micha J From: Micha Silver [mailto:mi...@arava.co.il] Sent: Tuesday, July 09, 2013 3:18 PM To: Jake Maier Cc: 'David J. Bakeman'; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] red rectangle On 07/09/2013 08:55 PM, Jake Maier wrote: David, thanks for your suggestion, but if it's a plugin, it should show up in every project (file). It only is in one .qgs file, though it seems to be related to that file. Jake From: David J. Bakeman [mailto:dbake...@comcast.net] Sent: Tuesday, July 09, 2013 1:40 PM To: Jake Maier Cc: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] red rectangle On 07/09/2013 09:51 AM, Jake Maier wrote: I have a red rectangle on my canvas even when I deselect all layers How did it get there? How can I get rid of it? What is the function of it? I had it in qgis 1.8 and it is now also in the newly installed 2.0 Thanks for your help Perhaps it's a plugin? I noticed a red cross after I installed zoom to coordinates plugin and the only way to get rid of it was to uninstall the plugin but I ignore it because the plugin is so useful! Probably the region outline from GRASS. On the GRASS toolbar there's a button to show/not show the region. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user This mail was received via Mail-SeCure System. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user This mail was received via Mail-SeCure System. -- Micha Silver GIS Consultant, Arava Development Co. http://www.surfaces.co.il ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] hydro-flatenning process ?
John, Would TauDEM be helpful to show consequences of a dam removal project at the coast (of Maine), where the dam removal would create reversing falls and had consequences upstream for bridge foundations and wetlands (now freshwater then brackish to some degree)? What kind of input variable would I need and what kind of output information would I gain? Thanks for any pointers Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of John Callahan Sent: Tuesday, July 09, 2013 9:59 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] hydro-flatenning process ? TauDEM (http://hydrology.uwrl.usu.edu/taudem/taudem5.0/index.html) also looks like a good candidate for this type of processing and can be configured to run through QGIS/SEXTANTE. - John John Callahan Research Scientist Delaware Geological Survey University of Delaware http://www.dgs.udel.edu john.calla...@udel.edu On Tue, Jul 9, 2013 at 9:45 PM, richard burcher drownedf...@gmail.com wrote: QGIS provides plenty of tools, both SAGA GIS (have to install binaries and access through SEXTANTE) GRASS (either through grass plugin or SEXTANTE). Both SAGA GRASS have strong raster hydrology based tools. You would need to elaborate on the exact methodology desired, but look around these tools. Cheers, Richard -- View this message in context: http://osgeo-org.1560.x6.nabble.com/hydro-flatenning-process-tp5065093p50652 56.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS crashes?
qgis-user@lists.osgeo.org; go here to ask you question. They are very helpful and knowledgeable J From: Robert Bryan [mailto:rbr...@forestsynthesis.com] Sent: Tuesday, June 25, 2013 6:28 PM To: 'Jake Maier' Subject: RE: QGIS crashes? All CRS is NAD 83/UTM 19N. Also ,the acreage discrepancy was within the same shapefile! From: Jake Maier [mailto:j...@jmforestry.com] Sent: Tuesday, June 25, 2013 1:48 PM To: 'Robert Bryan' Subject: RE: QGIS crashes? Check you CRS and see that they correspond. That's my first guess because of the discrepancy in the acreage Look what the project crs is and make sure the layer has the same J From: Robert Bryan [mailto:rbr...@forestsynthesis.com] Sent: Tuesday, June 25, 2013 1:37 PM To: 'Jake Maier' Subject: RE: QGIS crashes? Some are files I created and some are from others. I can be editing shapefile and it will crash, sometime but not always when saving. Here is a more bizarre example: Yesterday I went to add a polygon to an to an existing shapefile that I had worked on before. The add polygon process looked fine, it shows up in the attribute table, the calculated acreage is 0.004 acres when it should be 1.4 acres, and all the areas of the other polygons are OK. When I click zoom to selected rows from the attribute table it zooms to the entire polygon, but when I click the polygon on the map with the Information button there is nothing there. Then or any time in this process it may crash. This is on a map with some photos as base and a few other layers. So, I tried an experiment and opened a new QGIS project, opened the shapefile and was able to add a polygon with no problem. Then I closed the new project, opened the old project, and was able to open the edited polygon and update the properties, etc. With another project with some of the same layers I tried to make a new shapefile layer and went through all the steps, the layer was created, (all the basic files are visible in Explorer) but I could not actually create a polygon that was visible. So, I went to the simple new project (no rasters) described in the prior paragraph and was able to create a new layer and create the polygon I wanted. Saved that, then I could open it and see it with the old project. These issues seem to be getting more frequent. Even when I am able to create shapefiles and edit polygons I may get one to several crashes in a session. From: Jake Maier [mailto:j...@jmforestry.com] Sent: Tuesday, June 25, 2013 11:18 AM To: 'Robert Bryan' Subject: RE: QGIS crashes? Yes, I use qgis 1.8. I have minor problems but no crashes, and no problems editing shapefiles. Did you create the shapefiles in qgis, or did you get them from somewhere else? J From: Robert Bryan [mailto:rbr...@forestsynthesis.com] Sent: Tuesday, June 25, 2013 10:57 AM To: 'Jake Maier' Subject: QGIS crashes? Hi Jake, QGIS seems to crash a lot for me when editing shapefiles. I think it is mostly since I upgraded from v1.6 to 1.8. This is on a vintage 2008 VISTA machine. Are you sing QGIS and have you had any problems? -Rob Robert R. Bryan Forest Synthesis LLC 271 Harpswell Neck Road Harpswell, ME 04079 rbr...@forestsynthesis.com Phone: 207-725-8942 (office/home) Mobile: 207-504-0482 http://www.forestsynthesis.com/services.html Forest management, ecological, and certification services ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Euclidean Distance grid creation problem
-Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of skampus Sent: Tuesday, June 04, 2013 10:31 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] Euclidean Distance grid creation problem Alex Mandel-2 wrote Grey pixels do not mean no data. Did you check the values of random pixels with the Info tool? for this purpose i always suggest to install the Value Tool plugin Alex, where can you find the value tool plugin. It's not listed in my Python plugin installer Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] clipping problem
Hi I didn't think I would have problems with clipping. In the past it always worked properly. But now I have a soil layer, and created a rectangle as a clip layer. Everything seems normal and goes like expected until I open the new, clipped layer and it's empty. Would anybody please have an idea what's going on. What do I overlook? Thank you very much for your time. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] default crs
When I try to change the default crs in /options/crs/coordinate reference System for new layers And select a layer other than wgs 84, after pressing OK it reverts back to wgs 84 Do I overlook something or is this a bug? Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] LIDAR and QGIS
Hi Everyone Does anyone have experience with LIDAR and qgis, what do I need to display LIDAR information within qgis? I mean other than the 2 terabyte hard drive to obtain the information? Or does anyone know if I can get LIDAR for Maine (USA) on the internet? Thank you very much for any pointers. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] sextante update broken
I tried to update sextante and got error loading plugin The plugin seems to be invalid or have unfulfilled dependencies. Python said: cannot import name runalg. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] georeferencer issue
I looked at the tutorial for using the georeferencer and it looked quite simple and straight forward. But applying it I get strange results. Depending on the transformation type I get either a black rectangle or the image I want to reference, but at a wrong location. Each of the transformation types puts the image at its specific location I did use the feature to select the coordinates from the map canvas and in the table the coordinates are displayed correctly in the dstX and the dstY column. Still I can't get the image to display at the correct place on the map canvas. What am I doing wrong? Thanks for any hint Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] problem with table manager
I tried to add 2 columns to a table for label placement and everything seems to work as expected. I could see the 2 columns listed in table manager, but after the manager created the new attribute table only had one column left. I started with 4 columns, added 2 and was then left with just one column. Not only did the 2 added columns not show up the manager deleted 3 of the 4 original columns It looks like a bug or am I missing something. Thanks for your help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] problem with table manager
I found a potential reason. I called the 2 columns x and y. When I call the columns 'x col' and 'y col' it worked fine Jake From: Jake Maier [mailto:j...@jmforestry.com] Sent: Sunday, November 25, 2012 3:09 PM To: 'qgis-user@lists.osgeo.org' Subject: problem with table manager I tried to add 2 columns to a table for label placement and everything seems to work as expected. I could see the 2 columns listed in table manager, but after the manager created the new attribute table only had one column left. I started with 4 columns, added 2 and was then left with just one column. Not only did the 2 added columns not show up the manager deleted 3 of the 4 original columns It looks like a bug or am I missing something. Thanks for your help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] red line from nowhere
Hi All of a sudden a thin red line appeared in a project in qgis. I have no idea what I did to get the line, but now I can't get rid of it anymore. I deselected all layers still the line remains. It is a simple project with a few jgp air photos (all deselected) and a few shape files (also deselected) but the red line remains. Can anyone please tell me what it is and how to get rid of it again. Thanks for any help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] red line is gone
Hi I exited the program and re-started it, which did the trick The line is gone. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] red line is gone
From: David J. Bakeman [mailto:dbake...@comcast.net] Sent: Tuesday, November 20, 2012 6:53 PM To: Jake Maier Cc: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] red line is gone On 11/20/2012 06:58 AM, Jake Maier wrote: Hi I exited the program and re-started it, which did the trick The line is gone. This might of happened: If one of your shapefiles contained lines and you accidentally selected a line with the info tool it would stay displayed even after you turn that layer off. You have to turn off the info box and select a different tool for the line to go away. That's why it went away when you exited the program. Jake David, I think you are right, because I was editing a shapefile, and before that I played around with the info tool. Thanks, I'll know next time when something like this happens J ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] entering distance and bearing for polygon or polyline
-Original Message- From: Bernd Vogelgesang [mailto:bernd.vogelges...@gmx.de] Sent: Saturday, November 17, 2012 6:26 PM To: Jake Maier Subject: Re: [Qgis-user] entering distance and bearing for polygon or polyline welcome to the show ;) actually i had a similar problem a few days ago, and i can tell you, it was no fun. I didn't find any native solution. My use case (though i do not know yours): I had to draw new transect lines, i knew the starting coordinate, the distance (50m always) and the bearing. In addition to that, I had to draw 2*2 m polygons, each 10 meters of this line, starting at 5 m. So, there is the quite useful improved polygon capturing plugin which also handles polylines. With this, you can set a fixed length for the drawing of a line segment or polygon side. BUT, unfortunately it won't show the current bearing while drawing, nor can you set it (I already humbly asked the creator to maybe add this feature if possible). So, option #1 is to take a transparent triangle like you use in school, hold it to the screen and draw your lines (ughh). Option #2 is a lot of work, but more accurate: I entered my starting coordinates (x,y), bearing (alpha) and distance in excel and used sin(or cos)(radians(alpha))*distance + x(or y) (sorry, I do mix up sin and cos all the time, so better check yourself) to retrieve my end coordinates. Then i copied the calculated coordinates in separate rows like x,y x1,y1 x2,y2 x1,y1 x2,y2 etc. Then, i added an id column, to indicate which point pairs should form the line id,x,y 1,x1,y1 1,x2,y2 2,x1,y1 2,x2,y2 etc. Then, I imported this table as csv with the help of the mmqgis plugin - Transfer - Geometry Import from CSV File Lines were done. Polygons were designed this way: Transect Lines: Vector - Geometry Tools - Densify Geometry - Factor 9 = a new vertex every 5 meters With Cad Tools plugin, i created a parallel line to my transect line, distance 2 m. Densify Geometry with factor 24 to get 2m-segments on this line. Snapping options the transect layer set to segment and vertex and for the Cad Line to vertex. Starting to draw the polygon with the improved polygon capturing with 2 meters at 5m-vertex on the transect, snapping to the segment, then snapping to the Cad Line vertex, right click on next vertex to finish the polygon. and so on and so on and so on ... Maybe there is an easier way for that, but i couldn't find it. I hope sth of this may help you to find an idea for your problem. Greetz Bernd The Azimuth and Distance plugin does the trick Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] entering distance and bearing for polygon or polyline
Can someone please help? When creating a new polygon or polyline I want to enter numerical values for distance and bearing instead of pointing to the location of vertices. How can I do this I thought there was a popup window where you could enter the values but I can't find it and googling it I seem to lack the right search terms. Thanks for any hint. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] custom reference system
Thanks Tyler You are right, and thinking a bit about it I found a perfectly appropriate solution with the normal crs Jake From: Tyler Mitchell [mailto:i...@locatepress.com] Sent: Tuesday, August 28, 2012 11:52 AM To: Jake Maier Cc: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] custom reference system On 2012-08-28, at 5:26 AM, Jake Maier wrote: I try to make a blueprint for a stirling engine that I want to build. I think I'll need a custom crs for that. How would I go about it. What would the code look like. Or is it all together a silly idea and I should look for another drawing program to create blueprints? Any opinion and or help with this anyone? Thanks Jake Unless you want to reproject or share the data with others, I doubt there's much reason to define a system. Cool idea for an experiment either way... err I mean stirling engines are a hot idea :) ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] custom reference system
I try to make a blueprint for a stirling engine that I want to build. I think I'll need a custom crs for that. How would I go about it. What would the code look like. Or is it all together a silly idea and I should look for another drawing program to create blueprints? Any opinion and or help with this anyone? Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] log message freezes computer
Hi I now run qgis 1.8 on a windows 7 machine and when I try to open the log message with 4 messages inside the computer freezes completely. Nothing works anymore and I have to press the panic button to reboot. If I don't click on the little yellow triangle with the black exclamation mark everything works fine (so far) Any ideas about what to do would be greatly appreciated. Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] qgis has stopped working
Hi I get a message when I exit qgis that qgis has stopped working and windows is looking for a solution. Qgis is working correctly and everything seems working properly until I exit. This problem occurred with 1.7.4 and now also with 1.8. I have also qgis installed on my laptop with Ubuntu 12.04 and it is working correctly there. Again on the windows computer qgis works without a problem until I exit when I get the message that qgis has stopped working. Any ideas what may be wrong or how to fix it? Thanks jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] qgis 1.8 when official release
Hi I postpone installing the nightly 1.8 version since about a month because I hear from different sources that the official release is right around the corner. It still seems not to be ready for release. Hearing all the good stuff about 1.8, I'm contemplating to install the nightly release but am afraid that it now really is right around the corner and will be officially release whenever I finished the download. Does anyone have more exact release date information? Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] qgis 1.8 when official release
Thanks you Gary, but now I'm confused because at the top of the website it says 1.7.4 and there is no mention of 1.8. At least not in my browser. But now trying it, it says 1.8 on the download page So, thanks I'm fine but someone may want to change it at the top of the page J -Original Message- From: Gary Sherman [mailto:gsher...@geoapt.com] Sent: Wednesday, June 27, 2012 11:16 AM To: Jake Maier Cc: Gary Sherman; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] qgis 1.8 when official release On Jun 27, 2012, at 6:19 AM, Jake Maier wrote: Hi I postpone installing the nightly 1.8 version since about a month because I hear from different sources that the official release is right around the corner. It still seems not to be ready for release. Hearing all the good stuff about 1.8, I'm contemplating to install the nightly release but am afraid that it now really is right around the corner and will be officially release whenever I finished the download. Does anyone have more exact release date information? Thanks Jake 1.8 is released. See http://hub.qgis.org/projects/quantum- gis/wiki/Download to get yours. -gary =-=-=-=-=-=-=-=-=-=-=-=-=-=-= Gary Sherman GeoApt LLC http://geoapt.com Founder, Quantum GIS Chair, QGIS PSC Book: http://geospatialdesktop.com We work virtually everywhere =-=-=-=-=-=-=-=-=-=-=-=-=-=-= ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] failed to download package files
Hi I did successfully install qgis 1.8 on my Win7 pc, but when I try to install it on my Ubuntu machine I get 'failed to download package files' even so I'm connected to the internet. I have 12.04 and used the software center to first uninstall 1.7.4 and then to install 1.8. Please what can I do to download the package files? Thanks for any help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] qgis 1.8 when official release
-Original Message- From: Giovanni Manghi [mailto:giovanni.man...@faunalia.pt] Sent: Wednesday, June 27, 2012 1:09 PM To: Jake Maier Cc: 'Gary Sherman'; qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] qgis 1.8 when official release On Wed, 2012-06-27 at 11:31 -0400, Jake Maier wrote: Thanks you Gary, but now I'm confused because at the top of the website it says 1.7.4 and there is no mention of 1.8. At least not in my browser. But now trying it, it says 1.8 on the download page So, thanks I'm fine but someone may want to change it at the top of the page the banner changed and now it reflects the qgis 1.8 splash screen. You probably have the old banner in the cache of your browser :) cheers! -- Giovanni -- [JM] Thanks Giovanni I did refresh by pressing f5, thinking that would reload. Probably that was not right. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] managing emails
Hi Who can please help me to change my mailing preferences. I am going back to Germany for a week and just want to receive a summary of the emails and not all the individual emails. Possibly a summary once a week. Is that possible and how would I go about it. Thanks for any help Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] managing emails
Follow the link at the bottom of all emails you receive from the mailing list and go to change your subscription options [JM] Thank you everybody for the mail options information Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] qgis 1.8
Where and when can we get 1.8? We hear so much about it but I can't find a download site? Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] qgis 1.8
-Original Message- From: Paolo Cavallini [mailto:cavall...@faunalia.it] Sent: Thursday, June 14, 2012 8:11 AM To: Jake Maier Cc: qgis-user@lists.osgeo.org Subject: Re: qgis 1.8 Il 14/06/2012 13:34, Jake Maier ha scritto: Where and when can we get 1.8? We hear so much about it but I can't find a download site? wait a few days and you'll have the official release. what OS do you use? all the best. -- Paolo Cavallini - Faunalia www.faunalia.eu Full contact details at www.faunalia.eu/pc [JM] My work computer is (still) Windows 7. I switched my laptop since a few weeks to Ubuntu. J ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] default print template
-Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user- boun...@lists.osgeo.org] On Behalf Of Paolo Cavallini Sent: Monday, June 11, 2012 3:48 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] default print template Il 11/06/2012 00:26, Christine ha scritto: There will never be a template that will satisfy the needs of all/many users. A good idea could be creating a collection of templates for different purposes, so users might choose and download their favorites - similar like with the plugins. Agreed: the approach (and infrastructure) we use for plugins could be extended to print layout, styles, icons etc. Anyone wants to help, by directly coding or supporting the work of a developer? Thanks. -- Paolo Cavallini - Faunalia www.faunalia.eu Full contact details at www.faunalia.eu/pc ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user [JM] As this threat started with me I guess I should fess up and pay my dues :) Now where should I send the money so it's going to this project? Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] default print template
Right, Lene, I knew that part, but what about making a one of them the default? Thanks Jake From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of Lene Fischer Sent: Sunday, June 10, 2012 4:16 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] default print template Hi Jake In the printcomposer you can save a template. FileSave as template. And to use the template FileLoad template. Kind regards Lene Fischer Ass. Professor - GIS GPS Danish Center for Forest, Landscape and Planning University of Copenhagen Nødebovej 77A DK- 3480 Fredensborg Phone: 0045 40115084 Mail: l...@life.ku.dk Skype: lene.fischer.dk Jake Maier j...@jmforestry.com 09-06-2012 23:43 Is there something like a default print template so I could have the default use English paper size and default setup for the legend and things like that Thanks Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] default print template
Thank you very much Christine. This is a nice template and I will take some of the ideas, but my question actually was not so much the template itself but the *default* template, because I don't want to each time I open the composer to load the template, but it's not a problem really and I was just wondering if it could be customized even more. Again thanks Jake -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user- boun...@lists.osgeo.org] On Behalf Of Christine Sent: Sunday, June 10, 2012 4:26 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] default print template Have created a simple print composer template with the classical elements (north arrow, scale bar, scale text, legend and frame). If you like, you may use as a starting point for own customizations. Regards, Christine http://osgeo- org.1560.n6.nabble.com/file/n4980247/QGIS_MapComposer_Template_simple.q pt QGIS_MapComposer_Template_simple.qpt -- View this message in context: http://osgeo- org.1560.n6.nabble.com/default-print-template-tp4980191p4980247.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] default print template
-Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user- boun...@lists.osgeo.org] On Behalf Of Etienne Tourigny Sent: Sunday, June 10, 2012 6:31 PM To: Christine Cc: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] default print template Of course no defaults can satisfy all users completely. This, as well as personalized default styles, could be achieved if we could customize the default project. Basically, one could save a project as the default, which would get loaded every time a new project is created - instead of the global defaults. Makes sense? Etienne On Sun, Jun 10, 2012 at 7:26 PM, Christine geo.gu...@web.de wrote: ..., I don't want to each time I open the composer to load the template, ... Well, if you create a new QGIS project, in the print composer you have only to load a template (*.qgt) once. It will be saved with the project file (*.qgs). Actually you can load and save several templates/map compositions in the map composer of a QGIS project. You may also rename or delete them, if you like. There will never be a template that will satisfy the needs of all/many users. A good idea could be creating a collection of templates for different purposes, so users might choose and download their favorites - similar like with the plugins. Regards, Christine -- View this message in context: http://osgeo-org.1560.n6.nabble.com/default-print-template- tp4980191p4 980257.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user [JM] Yes Etienne, that's exactly what I had in mind. Tell qgis that this template should be loaded as the default at the beginning of each program start. Is there a way to have a python file loaded and executed as a default each time the program starts? I don't know much about python yet, but want to learn more about it and I'm sure it can be programmed to do exactly that. Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] default print template
-Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user- boun...@lists.osgeo.org] On Behalf Of Christine Sent: Sunday, June 10, 2012 6:26 PM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] default print template ..., I don't want to each time I open the composer to load the template, ... Well, if you create a new QGIS project, in the print composer you have only to load a template (*.qgt) once. It will be saved with the project file (*.qgs). Actually you can load and save several templates/map compositions in the map composer of a QGIS project. You may also rename or delete them, if you like. There will never be a template that will satisfy the needs of all/many users. A good idea could be creating a collection of templates for different purposes, so users might choose and download their favorites - similar like with the plugins. Regards, Christine -- View this message in context: http://osgeo- org.1560.n6.nabble.com/default-print-template-tp4980191p4980257.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user [JM] That is a good work around and something I need to start much more to set up for my purposes. It's that little bit of extra work at the beginning (which nobody has time to do) which will save so much work in the long run. Again thanks Christine Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] rearranging icons in toolbars
Is there a way to rearrange the icons in the toolbars. So far I can only turn complete toolbars on and off and rearrange a toolbar with all its icons but not the icons itself. It's not a big problem but would be nice if I could Thanks for any info Jake ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user