Re: [Qgis-user] DB manager PostGIS import fails for strange reason
Hi! Thanks to a tip in this thread, I have been able to confirm that the table actually contains multipart polygons. So the error message is right, and since the first found feature is multipart, the import fails immediately. If I select only the single part features, the import runs with no problem. Two questions remain to solve the issue. 1/ How come that the gpkg table properties are reported as geometry=Polygon? Is it so that geopackage polygon tables do not differentiate single and multipart? 2/ How do I force the DB Manager to create a MultiPolygon table instead of a Polygon table? Regards, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] DB manager PostGIS import fails for strange reason
Hi again! Andrea Giudiceandrea responded :"*it seems to me the error message says the contrary: you are trying to import MultiPolygon geometries in a Polygon column geom type table.*" Well I am not sure about that. It may be a semantic matter. The PostGIS table is non-existent at the time of import, so the importer can create any geometry type needed. Preferably polygon since the table in the geopackage has geometrytype=Polygon. And the error message "*PostGIS error while adding features: ERROR: Geometry type (MultiPolygon) does not match column type (Polygon)*" does not really define origin and target. Knowing that the geopackage table is polygon I assumed that for some reason a PostGIS multipolygon table was created, causing the mismatch. But let us assume that you are right - that the origin really is multipolygon - how can I specify that a multipolygon table be created when importing it to PostGIS? Regards, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] DB manager PostGIS import fails for strange reason
Hi! This regards QGIS version 3.26.0-Buenos Aires. Attempting to import a gpkg poly layer to PostGIS I get this unexpected error. *Error 6* *Feature write errors:* *Creation error for features from #-9223372036854775808 to #-9223372036854775808. Provider errors was: * *PostGIS error while adding features: ERROR: Geometry type (MultiPolygon) does not match column type (Polygon)* *Only 0 of 179 features written.* There is no option to set geometry type in the import settings, and a MultiPolygon table should anyway be able to accept single polygons. A corresponding gpkg point table from the same source can be imported without problem. I normally use FME to load PostGIS data, else I would probably have come across this sooner. -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Very strange installation problem QGIS 3.20.3
"*Did you create an issue for it? Else there will never be fix 'eventually' :-)*" No, I did not. I figured that enough people would stumble on this error anyway. And as it turns out, a freshly downloaded installation file worked w/o problem. Regards, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS server in professional use?
Nyall, and QGIS fellow users and friends! No one is born with knowledge, but everyone can learn. Which is what I am trying hard here. I humbly asked for user collaboration, and took great care in explaining what I have done, and what I am aiming at. (see also the thread "*Configuring QGIS server on Ubuntu 20.4*") I have not given up yet, but I will drop this thread. As you imply, it has taken off in the wrong direction. Best regards, Mats.E Den mån 18 okt. 2021 kl 09:44 skrev Nyall Dawson : > On Mon, 18 Oct 2021 at 17:23, Mats Elfström > wrote: > > > > I am not too happy if I have to start over on a new machine. > > With all due respect, what do you expect as the outcome of this > discussion? You're complaining about software you obtained for free! > If you're looking for commercial SUPPORT for QGIS then you need to > contract a QGIS support provider (see > https://qgis.org/en/site/forusers/commercial_support.html). If you're > not experienced enough to setup the server yourself, I strongly > caution you NOT to expose it to the internet and instead pay someone > with the experience to do this for you, and ensure it's done > correctly. > > If it's a volunteer task and you don't want to pay for support, then > you NEED to moderate your language and avoid the inflammatory wording. > That's never an effective way to get a good response from the > volunteer side of the community. > > Nyall > > > > > > > > Regards, Mats.E > > > > > > Den mån 18 okt. 2021 kl 04:31 skrev Richard Greenwood < > richard.greenw...@gmail.com>: > >> > >> Posting again without screenshot, which apparently caused my previous > email to await moderator approval. > >> > >> Mats, > >> > >> I fired up a new Ubuntu 20.04 instance on AWS and did the following 5 > steps which got me an XML capabilities document. > >> > >> # standard practice when starting a new instance > >> sudo apt update && sudo apt upgrade -y > >> # reboot if a new kernel was installed by apt upgrade > >> sudo reboot > >> # install qgis-server and apache web server > >> sudo apt install qgis-server apache2 libapache2-mod-fcgid > >> # enable apache fcgi and cgi > >> sudo a2enmod fcgi cgi > >> sudo systemctl restart apache2 > >> # in a web browser you should now get an XML document from the > following request > >> > http://IP-ADDRESS-OR-HOST-NAME/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities > >> > >> And 3 more steps got me a map > >> > >> # load some test data > >> wget https://github.com/qgis/QGIS-Training-Data/archive/v2.0.zip > >> sudo apt install unzip > >> unzip v2.0.zip > >> # in a web browser you should get a map from the following request > >> > http://IP-ADDRESS-OR-HOST-NAME/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities=/home/ubuntu/QGIS-Training-Data-2.0/exercise_data/qgis-server-tutorial-data/world.qgs=countries=WMS=1.3.0=GetMap=EPSG:4326=400=200=-90,-180,90,180 > >> > >> The tutorial tries to cover a lot of ground, maybe too much. And the 8 > steps above certainly don't cover enough for a production server. But it's > quite unfair to say that "QGIS Server is not ready for production". As > Donovan pointed out, there are a lot of moving parts and you have to have > some proficiency with all of them if you are doing it on your own. > >> > >> The basic principle is that QGIS Server is serving WMS, WFS, WCS > requests via CGI (or Fast-CGI). Apache, Ngix, IIS, Tomcat all can serve CGI > and Fast-CGI. Pick whatever operating system and web server you're the most > proficient with. Install QGIS Server, start with the simplest configuration > that you can, as I did above. Then start tuning it to your needs. If you > run into problems ask for help on the list or > https://gis.stackexchange.com/ with specific details as to what the > problem is. > >> > >> -- > >> Richard W. Greenwood > >> www.greenwoodmap.com > > > > > > > > -- > > > > > > GisKraft, Geodatakonsult > > > > Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden > > tel: +46 70 595 39 35 / www.giskraft.se > > > > ___ > > Qgis-user mailing list > > Qgis-user@lists.osgeo.org > > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS server in professional use?
Hi Richard! I agree, those steps should do it. I tried to carefully follow the instructions (as I have been told to do) on this page. https://docs.qgis.org/3.16/en/docs/server_manual/getting_started.html#installation-on-debian-based-systems which differs considerably from your instructions. Are these steps unneccesary? 1 You do not create a virtual host 2 You do not edit the .hosts file Those two steps have caused me the most worry, because I did not see the point of doing that, and the instructions are not very clear. Have you read my quite detailed report on every step of the described installation process, where everything went smoothly until the virtual host was added? I agree that this may seem as an HTTP server configuration problem more than a QGIS Server problem. But they are connected, QGIS Server is of no use without a HTPP server. And I consider the documentation of any software an integral part of the software. So that incomplete or false documentation can be considered a bug if it prevents the software from running. This machine is up on the net, has a PostgreSQL/PostGIS geodatabase with lots of data and Geoserver 2.19 up and running. No problems there. I am not too happy if I have to start over on a new machine. Regards, Mats.E Den mån 18 okt. 2021 kl 04:31 skrev Richard Greenwood < richard.greenw...@gmail.com>: > Posting again without screenshot, which apparently caused my previous > email to await moderator approval. > > Mats, > > I fired up a new Ubuntu 20.04 instance on AWS and did the following 5 > steps which got me an XML capabilities document. > > # standard practice when starting a new instance > sudo apt update && sudo apt upgrade -y > # reboot if a new kernel was installed by apt upgrade > sudo reboot > # install qgis-server and apache web server > sudo apt install qgis-server apache2 libapache2-mod-fcgid > # enable apache fcgi and cgi > sudo a2enmod fcgi cgi > sudo systemctl restart apache2 > # in a web browser you should now get an XML document from the following > request > http://IP-ADDRESS-OR-HOST-NAME > /cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities > > And 3 more steps got me a map > > # load some test data > wget https://github.com/qgis/QGIS-Training-Data/archive/v2.0.zip > sudo apt install unzip > unzip v2.0.zip > # in a web browser you should get a map from the following request > http://IP-ADDRESS-OR-HOST-NAME > /cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities=/home/ubuntu/QGIS-Training-Data-2.0/exercise_data/qgis-server-tutorial-data/world.qgs=countries=WMS=1.3.0=GetMap=EPSG:4326=400=200=-90,-180,90,180 > > The tutorial tries to cover a lot of ground, maybe too much. And the 8 > steps above certainly don't cover enough for a production server. But it's > quite unfair to say that "QGIS Server is not ready for production". As > Donovan pointed out, there are a lot of moving parts and you have to have > some proficiency with all of them if you are doing it on your own. > > The basic principle is that QGIS Server is serving WMS, WFS, WCS requests > via CGI (or Fast-CGI). Apache, Ngix, IIS, Tomcat all can serve CGI and > Fast-CGI. Pick whatever operating system and web server you're the most > proficient with. Install QGIS Server, start with the simplest configuration > that you can, as I did above. Then start tuning it to your needs. If you > run into problems ask for help on the list or > https://gis.stackexchange.com/ with specific details as to what the > problem is. > > -- > Richard W. Greenwood > www.greenwoodmap.com > -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS server in professional use?
Hi! Thanks to Jorge and Benoit for trying to assist with missing information. I have attempted to include the suggested code snippets into my virtual host file, and am at least able to start Apache2 now (there were errors I had to figure out). I am not too happy about the resulting mix. *Conclusion: FAIL* qgis_server.fcgi is running locally. check Apache2 is accessible on port 80 (http://geonet.se) check But despite all efforts, the request http://geonet.se/qgis/my_12?SERVICE=WMS=1.3.0=GetCapabilities invariably gets a 404 Not Found response. *Conclusion*: QGIS Server is not ready for production. There is a fatal bug, the missing parts of the documentation which prevents the setup and configuration of the service. Now I have to fall back on Geoserver, despite the miserable cartography and the SLD file difficulties. Tired and not so happy, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Very strange installation problem QGIS 3.20.3
Hi Nicolas! That is not an option. I have had QGIS installed in 'dotted' paths since 2.xx Currently 3.10, 3.16 and 3.20.1, all suggested by the installer. Dots in paths and folder names are perfectly valid and has nothing to do with 'local hard drive'. Den tis 12 okt. 2021 kl 13:06 skrev Nicolas Cadieux < njacadieux.git...@gmail.com>: > Hi, > > My first reaction is that a LTR can be installed with a developer version > but 3.20.1 and 3.20.3 not. I would need to test if this is still true. > Before checking that, I would remove the dots “ . “ from the path and try > again. > > Nicolas Cadieux > https://gitlab.com/njacadieux > > Le 12 oct. 2021 à 05:47, Mats Elfström a > écrit : > > > Hi! > I was going to install 3.20.3 in parallel with 3.20.1 when I got the > strangest installation error. > "Installation directory must be on a local hard drive." > I can think of nothing more local than C:\Program Files\QGIS 3.20.3\ > which is what the installer suggested. > What is going on here? I have never come across anything similar. > This is a Windows 10 machine with a current Microsoft subscription. > > -- > > > *GisKraft*, Geodatakonsult > > Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden > tel: +46 70 595 39 35 / www.giskraft.se > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > > -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Very strange installation problem QGIS 3.20.3
Hi! I was going to install 3.20.3 in parallel with 3.20.1 when I got the strangest installation error. "Installation directory must be on a local hard drive." I can think of nothing more local than C:\Program Files\QGIS 3.20.3\ which is what the installer suggested. What is going on here? I have never come across anything similar. This is a Windows 10 machine with a current Microsoft subscription. -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS server in professional use?
Many thanks, Jorge. That was very decent of you. Now I will see if I can braid those snippets into my server configuration. I will report back later. Best regards, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS server in professional use?
Hi? Is anybody using, or know of someplace where QGIS Server is used in a professional and public service, using Apache as web server? I would be immensively and eternally grateful if anybody in a position to do so would share the secrets of the Apache setup and configuration to act as web server to the QGIS fcgi service. Preferably also how one can rewrite the url so that a GetCapabilites request to a workspace folder will return a Geoserver equivalent response. Many many thanks beforehand, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Configuring QGIS server on Ubuntu 20.4
Hi Richard! I should have mentioned that. The request you suggest gives a Not Found response. The request http://qgis.demo/cgi-bin/qgis_mapserv.fcgi?service=WMS=getcapabilities gives *Project file error. For OWS services: please provide a SERVICE and a MAP parameter pointing to a valid QGIS project file* Doing that, like this http://qgis.demo/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities=/home/qgis/projects/my_12.qgz I get the wanted XML file. I would like to query the catalogue instead of a single project file. And like I said, the same request is valid for QGIS desktop *on the same machine*. A similar request, using the DNS name for the server, from the outside http://geonet.se/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities=/home/qgis/projects/my_12.qgz gives a 404 not found response. Not Found The requested URL was not found on this server. -- Apache/2.4.41 (Ubuntu) Server at geonet.se Port 80 *Conclusion*: QGIS Server is running behind the firewall but not accessible from the outside, *which of course is the purpose for my concept*. *Comment on other replies*: I am not saying that QGIS server is not ready for production or immature. On the contrary, it seems well documented and ready. I seem to recall that it also is OCG compliant and certified. *But * I am saying that the instructions for installation and configuration, particularly for the interaction between QGIS Server and the http engine are insufficient and sketchy. Regardless of OS, apparently. Regards, Mats.E Den sön 3 okt. 2021 kl 02:01 skrev Richard Greenwood < richard.greenw...@gmail.com>: > > > On Sat, Oct 2, 2021 at 10:02 AM Mats Elfström > wrote: > >> Hi! >> Let me just recuperate that the goal for QGIS server is to be used as a >> map and data server for webmaps on MapStore and to be harvestable by >> Geonetwork for a metadata catalogue. MapStore and Geonetwork are running on >> another machine. QGIS server shall run on a Ubuntu machine, along with data >> in PostGIS. The address for this machine is http://geonet.se >> Essentially, I see QGIS Server as an equivalent to Geoserver but with >> outstanding design capabilities. >> >> Here comes a run-through of an attempt to install QGIS server on an >> Ubuntu 20.4 system, using these instructions: >> >> https://docs.qgis.org/testing/en/docs/server_manual/getting_started.html#installation-on-debian-based-systems >> The first step is to install QGIS, according to this page >> https://qgis.org/en/site/forusers/alldownloads.html >> I opted to install qgis-server by adding that in the last command as >> suggested. >> No problems so far. Only, when returning to the first manual page, I see >> that I probably should have installed the LTR version instead of 3.20. If >> this is important, the user should be advised earlier, and instructed how >> to get the LTR version. For this review I will continue with 3.20. >> Next, the user is again advised to install qgis-server and optionally >> python-qgis. The motive for this is rather unclear at this stage, but I >> chose to install python as advised. >> Testing the installation by calling the fcgi seems to give a correct >> response, even if it differs from the two samples. Notice error code 302 >> for instance. >> root@geonet:~# /usr/lib/cgi-bin/qgis_mapserv.fcgi >> Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment >> variable. >> Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment >> variable. >> Warning 1: Unable to find driver JP2ECW to unload from GDAL_SKIP >> environment variable. >> "Loading native module /usr/lib/qgis/server/libdummy.so" >> "Loading native module /usr/lib/qgis/server/liblandingpage.so" >> "Loading native module /usr/lib/qgis/server/libwcs.so" >> "Loading native module /usr/lib/qgis/server/libwfs.so" >> "Loading native module /usr/lib/qgis/server/libwfs3.so" >> "Loading native module /usr/lib/qgis/server/libwms.so" >> "Loading native module /usr/lib/qgis/server/libwmts.so" >> Content-Length: 0 >> Location: http:/index.json >> Server: QGIS FCGI server - QGIS version 3.20.3-Odense >> Status: 302 >> >> Next, it is suggested that I download a QGIS project or ‘use your own’ so >> I manually created the /home/qgis/projects/ folder, and then saved a simple >> QGIS project file to the folder. By default, this was saved in the qgz >> format. >> Then an HTTP server is needed. >> A note says *In the following, please replace localhost with the name or >> IP address of your server.* >> But localhost only appea
Re: [Qgis-user] Configuring QGIS server on Ubuntu 20.4
from ‘other clients on the network’ and the *myhost *name. What would be the point for this? Not surprising, http://geonet.se/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS=1.3.0=GetCapabilities from the outside returns *Not FoundThe requested URL was not found on this server.Apache/2.4.41 (Ubuntu) Server at geonet.se <http://geonet.se> Port 80 * Doing just http://geonet.se returns the Apache2 Ubuntu Default Page And here the show stops. - I might add that PostgreSQL and Geoserver are accessible from the outside, and Geoserver serves WMS to the Internet as expected. Port 80 is obviously open too. - I can also access QGIS server from QGIS desktop *on the same machine*, using http://qgis.demo as root. But I had to include a MAP request in the string, with a full path to the project file. Conclusion: The missing piece of information seems to be how to make Apache2 direct incoming requests to QGIS Server, OR how to configure QGIS server to run as *your default website. *As all the rest depends on this, it is a vital piece of information. *Regards, Mats.E* Den tors 30 sep. 2021 kl 21:25 skrev Alessandro Pasotti : > > Hi, I'm sorry to hear that: we have even recently spent a considerable > amount of time (and money, because it was financed with a grant) to rewrite > the QGIS Server documentation with detailed information about deployment > [1], we have clearly missed the goal if you couldn't find what you needed > in these pages. > > It would be useful to know what exactly were your problems and what did > you try to do. > > A common problem with server deployments is that there are multiple ways > of doing things, it really depends on what you need, for example we are now > commonly using docker containers (there are many out there that provide a > QGIS Server working installation almost without the need to manually > configure anything). > > Also, I tend to use nginx, but apache is totally fine too. > > [1] > https://docs.qgis.org/3.16/en/docs/server_manual/getting_started.html#installation-on-debian-based-systems > > > On Thu, Sep 30, 2021 at 8:24 PM Mats Elfström > wrote: > >> Hi! >> I am setting up a Geodata stack. I have installed PostgreSQL/Postgis and >> Geoserver under Tomcat9 and FME:d a lot of data to PostGIS. All is up and >> running. >> Then I installed QGIS 3.20. No problems so far. Then I decided to try >> QGIS server as an alternative to Geoserver. But I am having trouble >> configuring QGIS server, or Apache2 rather. >> Over the past 5-6 years, I have spent more time and energy than I care to >> mention trying to make QGIS server run on Windows servers. Asking for >> advice on those occasions, I have more than once got the advice to use >> Linux instead, since no QGIS developers really know Windows servers. And >> Linux would be much easier. >> Fair enough. So now I am on Ubuntu, sudoing this and that and it works >> pretty well. >> Apart from QGIS server. I find the same mess of incomplete or >> contradictory instructions. No wonder QGIS server is under-used. >> If Linux(Ubuntu) is so simple, how come no one has put together a working >> script to configure and deploy QGIS server on a standard setup? >> I am most disappointed, having spent yet 5 hrs that I will never get back >> on QGIS server. >> >> Regards, Mats.E >> >> -- >> >> >> *GisKraft*, Geodatakonsult >> >> Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden >> tel: +46 70 595 39 35 / www.giskraft.se >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user >> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user >> > > > -- > Alessandro Pasotti > QCooperative: www.qcooperative.net > ItOpen: www.itopen.it > -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Configuring QGIS server on Ubuntu 20.4
Hi! I am setting up a Geodata stack. I have installed PostgreSQL/Postgis and Geoserver under Tomcat9 and FME:d a lot of data to PostGIS. All is up and running. Then I installed QGIS 3.20. No problems so far. Then I decided to try QGIS server as an alternative to Geoserver. But I am having trouble configuring QGIS server, or Apache2 rather. Over the past 5-6 years, I have spent more time and energy than I care to mention trying to make QGIS server run on Windows servers. Asking for advice on those occasions, I have more than once got the advice to use Linux instead, since no QGIS developers really know Windows servers. And Linux would be much easier. Fair enough. So now I am on Ubuntu, sudoing this and that and it works pretty well. Apart from QGIS server. I find the same mess of incomplete or contradictory instructions. No wonder QGIS server is under-used. If Linux(Ubuntu) is so simple, how come no one has put together a working script to configure and deploy QGIS server on a standard setup? I am most disappointed, having spent yet 5 hrs that I will never get back on QGIS server. Regards, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Auto-Find on unavailable layers?
Hi! QGIS 3.14.16 What is this option supposed to do? All I get is a small, empty dialog which goes into a not responding state. QGIS then needs to be shot down. The missing layer is a shape file which I have moved from one location into the QGIS current project (Home) folder. So finding it should be easy. As it is if I choose Browse instead. /Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] 3D view broken in 3.16?
Hi! Has there been a significant change in underlying 3D libraries for 3.16? When people ask I use to claim that QGIS does not need any particular hardware to run, even if more RAM and high resolution screens are always an advantage. But that goes for any software, and is more standard that it used to be. But now my trusted HP ProBook 4530s (2011) laptop refuses to display any 3D views from QGIS. This goes for both the ThreeJS plugin and QGIS 'native' 3D view. The latter paints an image, but out of zoom and scale, and it cannot be moved or rotated. I have the latest (2016) drivers for the built in Intel GPU and see no possible settings to play with. I have had no problems with this up until 3.14. Regards, Mats.E -- *GisKraft*, Geodatakonsult Mats Elfström, Marsvinsholms stationsväg 80, 271 93 Ystad, Sweden tel: +46 70 595 39 35 / www.giskraft.se ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS release confusion
Hi! I am a bit confused about the current QGIS releases. The splash screen for QGIS 3.10.2 says Long Term Release, but the download page maintains that 3.4.15 is the LTR. or Long Term Release Repositories (LTRR?). Instructions for the Network installer says "To get the *long term release* (that is not also the latest release)..." Which one would that be? And the road map says that 3.10.3 will be LR/PR, due tomorrow. And no LTR until october. Is there a difference between Long Term Release and Long Term Repositories? The release schedule says "four monthly releases with LTRs in late february". Please clarify. Regards, Mats.E -- ______ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Keep Georeferencer window in focus?
Hi! I seem to remember a discussion on a setting to keep the Georefencer window in focus when getting reference points from the map canvas. Now I am unable to find it, and see no obvious item in the Georefencer plugin config variables. This is QGIS 3.4.10. Using a dual, or widescreen setup, there is no need to hide the raster window, and it would be most helpful to see them both at the same time. An option to always get map canvas coordinates would also save a lot of clicks. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS3 Server on Windows Server and IIS
Hi! Thanks for hints. I forgot to state a fourth assumption: * I believe that there are QGIS users who know how to deploy QGIS Server under Windows server, and are willing to share that knowledge. Not that somebody would freely volunteer to figure this out for fun. This mess is very far from fun. I have given Docker a try. First, I had to commission an expensive Windows 2016 machine, since Docker will not run on 2012 which all my Geodata machines use. And where there are no problems with components like PostGIS, Geoserver and so on. So I installed Docker and was within minutes stuck in a proverbial quagmire of missing files, missing rights and whatever. In short, Docker did not even initialise properly. I will not go there again. I fail to see the point of having to run a simple application in a virtual Linux machine within a virtual Windows machine. Too many layers on that onion. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS3 Server on Windows Server and IIS
Hi All! I have once again made a futile attempt to establish a QGIS Server on a Windows Server. This time with a twist, I want to use IIS instead of Apache as web server. These two posts seem to indicate that this is possible. https://domasin.github.io/valgrande/qgisserveriis.html https://github.com/mapserver/mapserver/wiki/Installing-Mapserver-under-IIS-7.n-with-FastCGI I also second this Stackexchange question which so far is unresponded to. https://gis.stackexchange.com/q/315932 These are my assumptions: · I believe that QGIS 3 Server can run on a Windows Server machine (2012 is my current option) · I believe that IIS can be the web server for QGIS server. · I believe that a stable process for this installation can be proven and documented. However, available descriptions do not work. In many cases, they describe specific paths and files which may differ from case to case, and thus create errors. It would be better if someone who really knows could describe what needs to be done in general terms, rather than “copy these files from here to there”. I will once again extend an offer to provide a solution to this situation. 1. I will, at my own cost, provide full access to a vanilla Windows 2012 Server to perform and fully document a complete QGIS3 LTR desktop and server installation and configuration, using IIS as web server. Configuring IIS will be part of this. 2. The offer is open to any individual who can indicate relevant experience, and for a reasonable amount of time. The documentation will of course be tested and released as open source and hopefully also be part of the QGIS3 documentation. 3. My contribution will be the cost for the machine and time for testing. The applicant will provide his/her time and knowledge. Applicants please respond to this thread, as I want the effort to be as open as possible. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS with Boundless Explorer
Hi! I am struggling with a QGIS - Boundless Geoserver Explorer - Geoserver setup. I realise that Boundless' stuff is pretty outdated, so I'd like to know which the latest versions are that are supposed to run together? Also, if there are certain 32-64 dependencies that must be met. The platform is a Windows 2012 64 cloud server. Curently, I have - QGIS 2.18.25 32 bit - Geoserver Explorer 0.6 (boundless repository) - Geoserver 2.13.3 on JVM 1.8.0_191 32 bit This does not work. I get a recurring Python error: local variable 'layerItem' referenced before assignment or various other fatal Python errors when attempting to publish layers and generally communicating with the Geoserver. There is no QGIS 3 version of the plugin. I have tried Geoserver 2.14 to no avail. I have also tried the QGIS version from Boundless, the so called Boundless Desktop. Same error unfortunately. This points to the Geoserver version as the culprit. Is anybody able to confirm this? I would really not like to downgrade that, since I'd like this server setup to be as current as possible. The bug tracker at Boundless github has similar questions, but no help. I'd appreciate any troubleshooting hints. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS style linking
Hi! I would like to link a QGIS style library to a project file, so that I can edit a style in the style manager, and then see that edit on the canvas when it redraws. Is that possible, and how could it be done? I have thougt about tagging objects with the style feature name, but I cannot find any variable that refers the style library. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Instant Qgis 3 crash on the zoom icon
Hi! My question is: Can somebody point out a working setup for a Qgis Linux cloud server? I terms of Linux distribution, Qgis version, mode for remote access and so on. Life is too short to test more variables. For the last couple of weeks, I have explored the world of virtual cloud Linux servers and Qgis. A painstaking endeavor, I might add. My goal is to set up a stable Qgis server instance, with QGIS 3 on Ubuntu 18.04 Bionic. I want to run QGIS desktop on the same server for map design and have remote desktop (VNC or RDP) access from a Windows machine. The server shall also run a current Postgresql/Postgis instance. I have tried Google cloud instances, Amazon EC2 and Microsoft Azure but these fell through because of clunky admin interfaces and bad remote access. I did not even get so far as to install Qgis on them. The most successful attempt so far is on City Cloud, a Swedish cloud provider. After hours of trial and error, and several machines scrapped along the way, I managed to get the above setup up and running, serving a couple of live wms services. Then, for no reason, Qgis desktop fell out of the game. It crashes invariably and instantly when touching the zoom in/zoom-out icons (key shortcuts as well). No trace, no error message, just vaporware. And I mean that I just click the icon, I do not even get a chance to hit the canvas before it dies. Oddly enough, it worked initially for a few days. No point in filing a bug for this, as no one will be able to reproduce my setup. There is no remotely close bug report, either. I have a hunch that the problem comes from the gui system, the vnc server or both. That is why I need advice on a stable working setup. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS 3 installation on Ubuntu
Hi all! I am in need of some advice, because I am venturing into unknown territory. I want to explore the Linux side of QGIS, and I want to set up a Linux GIS machine (Cloud based). Bear with me, because my computing skills are in Microsoft territory. However, they date back from DOS days so I would say I am sufficiently computer literate. I have selected Ubuntu as platform, since I have some experience from that. Which version matters less, I have several to choose from on my Cloud provider. In the process, I am trying to piece together instructions and tips from different sources, of which the most reliable seems to be the ones at the qgis.org site. However, there are some puzzling obstacles. I have tried using QGIS 3.2 Bonn, and Ubuntu 18.04 bionic btw. 1/ For Ubuntu, I am adviced to load Debian repositories. There seems to be no Ubuntu folders. Are Ubuntu and Debian equal in this respect? 2/ The installer is unable to find ”deb-src https://qgis.org/debian bionic main”, while ”deb https://qgis.org/debian bionic main” worked fine. I carried on neverteless, but it seemed to give an incomplete installation. 3/ The instructions give the advice: ”In case you would like to install QGIS Server (note that it’s not a common practice to install both client and server applications on the same machine)…” Why is that? To me it would be common sense to install QGIS desktop and server on the same machine, to make sure that published map designs share the same paths and database connections. How else to ensure this? I have Windows servers with QGIS 2 desktop and server residing on the same machine with no problem. Furthermore, I plan to install Postgresql/Postgis on the same machine as well, for the same reason as above. Is that unsuitable too? Thankful for any advice, or links to a reliable installation manual. Note that i have scrapped the Cloud machines so far, so I cannot go back and test stuff. I always find it more reassuring to follow a straight path to success rather than going back for repairs at this stage. Regards, Mats.E __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS communication platforms
Hint taken. Goodbye. 2016-07-18 15:42 GMT+02:00 Alessandro Pasotti <apaso...@gmail.com>: > On Mon, Jul 18, 2016 at 3:34 PM, Mats Elfström <mats.elfst...@giskraft.com > > wrote: > >> Hi! >> I am sad to say that I disagree strongly with the views expressed in some >> replies to my earlier post. >> >> I am a kid of 63 who has found that Facebook and Twitter are important >> and invaluable sources and platforms for both communication and >> information. >> And kids of a younger age are, and must be our target audience. I do not >> know about you abroad, but in Sweden there is an alarming lack of students >> and graduates in the geospatial sciences. It is now hard to find educated >> young people to fill the gaps when us old kids retire. I try to evangelize >> QGIS as good as I can and have opportunity to, and an FB page needs no >> explanation, while mailing lists are an unknown entity. Among younger kids, >> i mean. >> >> Second, I am a volunteer. I run a Facebook page for QGIS in swedish, and >> try to pick up news on QGIS development and QGIS use of a general interest. >> Time is a factor, of course, but using FB I need not spend any time to >> maintain userlists, login procedures, web servers etc. I can spend the time >> I can offer to maintain the content of the page, which is what should >> matter in the end. >> An I do not think that 2+ FB QGIS likers deserve to be so lightly >> disregarded. >> >> >> > > Mats, > > what's the problem here? No need for flames. > > Does anybody refused your help in spreading the word on FB? > > I'm not on FB and I will probably never be, but I've absolutely nothing > against you promoting QGIS on FB, if you feel like doing it, just do it. > > What I don't understand is why you criticize this ML, if you don't find it > useful or you don't like it, just unsubscribe. > > > -- > Alessandro Pasotti > w3: www.itopen.it > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > -- *GisKraft*, GIS och webbkonsult Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 70 595 39 35 / web: www.giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS communication platforms
Hi! I am sad to say that I disagree strongly with the views expressed in some replies to my earlier post. I am a kid of 63 who has found that Facebook and Twitter are important and invaluable sources and platforms for both communication and information. And kids of a younger age are, and must be our target audience. I do not know about you abroad, but in Sweden there is an alarming lack of students and graduates in the geospatial sciences. It is now hard to find educated young people to fill the gaps when us old kids retire. I try to evangelize QGIS as good as I can and have opportunity to, and an FB page needs no explanation, while mailing lists are an unknown entity. Among younger kids, i mean. Second, I am a volunteer. I run a Facebook page for QGIS in swedish, and try to pick up news on QGIS development and QGIS use of a general interest. Time is a factor, of course, but using FB I need not spend any time to maintain userlists, login procedures, web servers etc. I can spend the time I can offer to maintain the content of the page, which is what should matter in the end. An I do not think that 2+ FB QGIS likers deserve to be so lightly disregarded. Cheers, Mats.E 2016-07-18 14:20 GMT+02:00 Mats Elfström <mats.elfst...@giskraft.com>: > Hi! > I am sad to say that I disagree strongly with the views expressed in some > replies to my post. > > I am a kid of 63 who has found that Facebook and Twitter are invaluable > sources and platforms for both communication and information. > And kids of a younger age are, and must be our target audience. I do not > know about you abroad, but in Sweden there is an alarming lack of students > and graduates in the geospatial sciences. It is now hard to find educated > young people to fill the gaps when us old kids retire. > > Second, I am a volunteer. I run a Facebook page for QGIS in swedish, and > try to pick up news on QGIS development and QGIS use of a general interest. > Time is a factor, of course, but using FB I need not spend any time to > maintain userlists, login procedures, web servers etc. I can spend the time > I can offer to maintain the content of the page, which is what should > matter in the end. > An I do not think that 2 FB users deserve to be so easily disregarded. > > Cheers, Mats.E > > 2016-07-18 13:02 GMT+02:00 Nathan Woodrow <madman...@gmail.com>: > >> I, along with some others, manage the Facebook and Twitter accounts. It's >> not normally a issue I have just been a bit slow with it lately. >> >> Both are updated now. >> >> On Mon, Jul 18, 2016 at 8:57 PM, Neumann, Andreas <a.neum...@carto.net> >> wrote: >> >>> I am not sure if Facebook is our target audience. Isn't this more for >>> the kids? >>> >>> However, if someone volunteers to work on that - feel free to do it. >>> >>> On Twitter there is probably more news on QGIS - but I agree with Strk >>> that the mailing lists should be our primary channels - properly archive - >>> no restrictions - free for everyone without having to pay with your >>> personal data. >>> >>> Andreas >>> >>> On 2016-07-18 11:51, Mats Elfström wrote: >>> >>> >>> This is what 20 774 QGIS likers on Facebook get as QGIS news. >>> >>> >>> Surely they are entitled to a bit more attention? >>> Why do you cling to old century mailing lists and bulletin board >>> technology? >>> How many subscribe to this list? >>> >>> Regards, Mats.E >>> -- >>> >>> >>> *GisKraft*, GIS och webbkonsult >>> Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden >>> tel: +46 70 595 39 35 / web: www.giskraft.com >>> >>> ___ >>> Qgis-user mailing list >>> Qgis-user@lists.osgeo.org >>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user >>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user >>> >>> >>> >>> >>> ___ >>> Qgis-user mailing list >>> Qgis-user@lists.osgeo.org >>> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user >>> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user >>> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user >> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user >> > > > > -- > > > *GisKraft*, GIS och webbkonsult > Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden > tel: +46 70 595 39 35 / web: www.giskraft.com > -- *GisKraft*, GIS och webbkonsult Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 70 595 39 35 / web: www.giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS Sponsor Offer
Just to clarify: 1/ I have volunteered many hours trying to install QGIS Server but failed. I wanted to document the process and offer that to the community. I tried to piece together and use the fragments of information that can be found on the subject, but it became too much trial and error and pure guesswork. At one point, I had it running, but with the mentioned guesswork, I could not stand for the validity of that installation process. I concluded that I am missing information which probably is exclusive to the author of the software. 2/ I am not asking for help for my personal needs. I offered a platform for someone more clever than me to be able to provide documentation to qgis.org 3/ IIS is not required. Feel free to choose any web server, but the installation manual must cover the installation and configurationof the web server as well. Regards, Mats.E 2016-07-18 12:40 GMT+02:00 Richard Duivenvoorde <rdmaili...@duif.net>: > On 15-07-16 10:13, Mats Elfström wrote: > > Hi! > > I made this offer a couple of months ago, but it probably got buried in > > the thread because no one has responded. I still think it would be good > > for the QGIS community to get updated and working installation > > instructions for QGIS Server, and this is my contribution. > > > > Background > > To my knowledge, there is no current, official and validated > > installation and configuration manual for QGIS server on Windows 2012 > > server. > > > > Offer of sponsoring. > > I hereby offer unlimited admin access to a Windows 2012 R2 server in the > > cloud, to install QGIS and QGIS Server, configure it and publish one > > QGIS project, and document and publish reproduceable step by > > step-instructions for this platform. > > Admin access will be granted for a reasonable time, to anyone in the > > QGIS community who wants to do this, and has sufficient QGIS and Windows > > experience. I will decide who gets access, and will monitor and follow > > up on the process. > > The resulting documentation will of course be offered as part of the > > QGIS Server manual. > > The candidate may select which web server to use, even if I would prefer > > IIS. > > The candidate may also select the kind of data source for the published > > WMS service. > > I will provide one vanilla Windows 2012 server cloud machine for a > > reasonable period of time. > > Hi Mats, > > Thanks for your offer. > > I hereby forward your email to the PSC, who is in charge of reacting on > these kind of requests... there is just too much communication going on > to see everything... > > But in general: it's not hardware that is a 'problem'. It is > volunteership of people, who want to invest their time to dive into the > specifics of Windows 2012 R2 and IIS in combi with QGIS Server, and keep > that information up to date... > > Note, we have: > > > http://docs.qgis.org/testing/en/docs/user_manual/working_with_ogc/ogc_server_support.html > And http://demo.qgis.org/ which runs QGIS-Server in docker containers > using > https://github.com/kartoza/docker-qgis-server > > We could setup something like that on your server too? > > So personally speaking: it is best if you provide (also) man-hours to do > the Windows administration. > > BUT if there is somebody listening who wants to offer "Windows time or > knowledge"! > > Please let us or Mats know! > > Regards, > > Richard Duivenvoorde > > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS communication platforms
This is what 20 774 QGIS likers on Facebook get as QGIS news. Surely they are entitled to a bit more attention? Why do you cling to old century mailing lists and bulletin board technology? How many subscribe to this list? Regards, Mats.E -- *GisKraft*, GIS och webbkonsult Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 70 595 39 35 / web: www.giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS Sponsor Offer
Hi! I made this offer a couple of months ago, but it probably got buried in the thread because no one has responded. I still think it would be good for the QGIS community to get updated and working installation instructions for QGIS Server, and this is my contribution. Background To my knowledge, there is no current, official and validated installation and configuration manual for QGIS server on Windows 2012 server. Offer of sponsoring. I hereby offer unlimited admin access to a Windows 2012 R2 server in the cloud, to install QGIS and QGIS Server, configure it and publish one QGIS project, and document and publish reproduceable step by step-instructions for this platform. Admin access will be granted for a reasonable time, to anyone in the QGIS community who wants to do this, and has sufficient QGIS and Windows experience. I will decide who gets access, and will monitor and follow up on the process. The resulting documentation will of course be offered as part of the QGIS Server manual. The candidate may select which web server to use, even if I would prefer IIS. The candidate may also select the kind of data source for the published WMS service. I will provide one vanilla Windows 2012 server cloud machine for a reasonable period of time. Regards, Mats.E -- *GisKraft*, GIS och webbkonsult Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 70 595 39 35 / web: www.giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS 2.16 cannot use WMS services as 2.14 did
Very likely. The services have the same origin. I will update the bug tracker. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. > 14 jul 2016 kl. 11:51 skrev Luigi Pirelli <lui...@gmail.com>: > > can it be this sever issue https://hub.qgis.org/issues/15258 > > please add more info in the issue tracker > > regards > Luigi Pirelli > > ** > * Boundless QGIS Support/Development: lpirelli AT boundlessgeo DOT com > * LinkedIn: https://www.linkedin.com/in/luigipirelli > * Stackexchange: http://gis.stackexchange.com/users/19667/luigi-pirelli > * GitHub: https://github.com/luipir > * Mastering QGIS: > https://www.packtpub.com/application-development/mastering-qgis > ** > > >> On 14 July 2016 at 11:31, Mats Elfström <mats.elfst...@gmail.com> wrote: >> Hi! >> For some reason, existing projects and WMS connections from 2.14.3 does not >> work in 2.16. >> Capabilities download fails, or I get Map request failed [error:Connection >> closed. >> Is there some fundamental change in 2.16 that needs another setup or other >> parameters for WMS? >> Most of the the services I use needs basic authorization, but that seems to >> work. The error occurs as the map is to be rendered. >> We rely heavily on WMS for background maps, so this is a showstopper for v >> 2.16. >> >> Regards, Mats.E >> -- >> __ >> Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden >> tel: +46 46 145959 / mob: +46 70 595 39 35 >> alt e-mail: mats.elfst...@giskraft.com >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user >> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS 2.16 cannot use WMS services as 2.14 did
Hi! For some reason, existing projects and WMS connections from 2.14.3 does not work in 2.16. Capabilities download fails, or I get Map request failed [error:Connection closed. Is there some fundamental change in 2.16 that needs another setup or other parameters for WMS? Most of the the services I use needs basic authorization, but that seems to work. The error occurs as the map is to be rendered. We rely heavily on WMS for background maps, so this is a showstopper for v 2.16. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] A qgis2web, or maybe openlayers, question on displaying feature attribute of WMS data
Hi Kuan! Not all wms services are queryable. This is for the provider to decide, and nothing to do with QGIS. But if they are queryable, qgis2web should provide for that. However, it would be very useful to be able to select and format the output. Some services has a lot uf surplus information, and system dependent field names may need to be aliased for readability. Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. > 18 maj 2016 kl. 04:36 skrev Kuan Song: > > Dear community, > > I love the qgis2web tool. It almost offers everything I need... with one tiny > exception. > > When I publish a dataset using this tool, sometimes I can click a feature on > the map and view the feature attributes, sometimes I can't. If the dataset is > a shapefile, then qgis2web basically converts it to a geojson file, and > provides the view feature attributes capability. But if the dataset comes > from a WMS source, then qgis2web cannot click and query the feature. > > As I experimented along the way, the wms option is much faster than the > geojson option. I wish to learn how to enable the click-and-query feature > attributes. Can someone teach me? Thanks! > > > Kuan > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS Server on Windows Server 2012 R2
Hi Uros! Now I have spent a reasonable amount of time for yet another failed attempt to install QGIS server. I did not get past the Apache part. First, the VCRUNTIME140.dll reported missing. Solved by installing a later vcredist. Next, I get this: Cannot load c:/php/php5apache2_4.dll into server: %1 is not a valid Win32 application. Googling this gives the same ad hoc assortment of guesses. Here I give up. This was not a valid description. Regards, Mats.E 2016-04-19 17:12 GMT+02:00 Uros Preloznik <uro...@gmail.com>: > Hi > > Did you try this: > http://level2.si/index.php/2015/12/19/qgis-server-on-windows-10/ > > I know it's not out of the box, but should work also on Windows server. > > Regards, > Uros Preloznik > Hi! > Could someone please point me to a current, valid and working installation > instruction for QGIS Server installation on a Windows Server 2012 R2 > machine? > I have searched extensively on all QGIS channels, but all posts on the > subject are either several years old, or more or less 'ad hoc' descriptions > of a trial and error process. > > I am tired of trying to make QGIS work with Geoserver. The Boundless Suite > only works with rudimentary cartography. > > Regards, Mats.E > -- > __ > Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden > tel: +46 46 145959 / mob: +46 70 595 39 35 > alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS Server on Windows Server 2012 R2
Hi Uros! No I did not. Your post was under my radar. It seems reasonable, and I will give it a try and report back. What I really would like is for a QGIS developer to explain how it is supposed to work, the prerequisites that are needed, and ultimately build an installer that delivers a working installation. Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. > 19 apr. 2016 kl. 17:12 skrev Uros Preloznik <uro...@gmail.com>: > > Hi > > Did you try this: > http://level2.si/index.php/2015/12/19/qgis-server-on-windows-10/ > > I know it's not out of the box, but should work also on Windows server. > > Regards, > Uros Preloznik > > Hi! > Could someone please point me to a current, valid and working installation > instruction for QGIS Server installation on a Windows Server 2012 R2 machine? > I have searched extensively on all QGIS channels, but all posts on the > subject are either several years old, or more or less 'ad hoc' descriptions > of a trial and error process. > > I am tired of trying to make QGIS work with Geoserver. The Boundless Suite > only works with rudimentary cartography. > > Regards, Mats.E > -- > __ > Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden > tel: +46 46 145959 / mob: +46 70 595 39 35 > alt e-mail: mats.elfst...@giskraft.com > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS Server on Windows Server 2012 R2
Hi! Could someone please point me to a current, valid and working installation instruction for QGIS Server installation on a Windows Server 2012 R2 machine? I have searched extensively on all QGIS channels, but all posts on the subject are either several years old, or more or less 'ad hoc' descriptions of a trial and error process. I am tired of trying to make QGIS work with Geoserver. The Boundless Suite only works with rudimentary cartography. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Problem with QGIS 2.14.1 and MapInfo 12.0.3 coexistence and sharing the same data
Hi! Most likely, this will baffle MapInfo and result in unpredictable behaviour. Also, the ticket referred to claims that QGIS ignores read-only locks on files. Which in itself is a rather surprising bit of information if true. Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. > 12 apr. 2016 kl. 13:12 skrev Bo Victor Thomsen: > > Claus - > > (Not tested, just a suggestion) Try to make all the files used for a MapInfo > layer (.tab, .id, .dat. map..) read-only for the QGIS users. > > QGIS 2.14 is using a new version of GDAL/OGR (2.0) to read and write tab > files. This new version of GDAL/OGR is is probably locking the MapInfo files > with a file lock because it prepares the files for update operations. Updates > was not possible for earlier versions of GDAL/OGR. > > If you set the read-only attribute on the MapInfo files, QGIS (aka the > GDAL/OGR subsystem) might not generate the file lock that makes it impossible > for MapInfo to read the files. > > Regards > > Bo Victor Thomsen > Municipality of Frederikssund, Denmark > > >> Den 12-04-2016 kl. 12:57 skrev Claus Sørensen: >> with QGIS and MapInfo coexistence. >> I have no problems opening the same MapInfo tab file (native mapinfo 7.8 >> format) from 2 pc's ru > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [Announce] GISVM OpenGeo Suite 64bit version
Hi! I would like to run this vm on a paid for cloud service. How would that be done? For instance, as an Amazon AMI or the equivalent. Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. > 4 apr. 2016 kl. 01:13 skrev Ricardo Pinho: > > Dear all, > > Just to announce the "GISVM OpenGeo Suite 64bit" release: > http://gisvm.com/gisvm-opengeo-suite-64bit/ > > Run it on your computer and inside QGIS use "Geoserver Explorer plugin" to > have full access to this exceptional full feature enterprise GIS solution > from Boundless. > http://plugins.qgis.org/plugins/geoserverexplorer/ > > If interested, just have a look at the QUICK START manual to understand how > it can be useful to you. > > Thank you for supporting the project. > Have fun! > > Best regards > -- > Ricardo Pinho > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS on the road in a native environment?
This is interesting news. Will it be possible to run *nix QGIS on this tablet, I wonder? http://www.ubuntu.com/tablet/devices Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Heatmap plugin questions
Hi! Running the heatmap plugin in QGIS Essen, I have come across a couple of anomalies. I would like to check if these are known or reported before exploring further, or reverting to a fail safe process. 1/ Subselected layers (Provider feature filter) are not honored, but produces an empty tiff stub file. 2/ Point data from sqlite crashes the plugin and minidumps QGIS. I can add that the heatmap plugin works as expected against a shape file layer with no Provider feature filter. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Google to withdraw aerial images?
Hi Michael! How about https://data.gov.uk/dataset/os-mastermap-imagery-layer ? This is apparently not open data, but here in Sweden, all universities have open access to most geodata, including an orthopoto service from our National land survey. I am curious here; what is the Ordnance survey policy for open geodata? Regards, Mats.E Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. > 16 feb. 2016 kl. 21:46 skrev Michael.Dodd: > > Does anyone know if the aerial imagery that google provide, and which can be > accessed into qgis projects, is being withdrawn? > Looking at google maps aerial imagery for UK, the aerial photos are now gone > and instead replaced by some kind of horrible processed hybrid image. This > is of little or no use for ecological projects and I suspect looses its value > in many other types of project. > > Is it time to start a campaign to keep the original imagery and at least have > it accessible via qgis or other systems. > > I suspect Google think they know best so will convert all their imagery to > this horrible processed version. > -- The Open University is incorporated by Royal Charter (RC 000391), an > exempt charity in England & Wales and a charity registered in Scotland (SC > 038302). The Open University is authorised and regulated by the Financial > Conduct Authority. > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] ARCGIS Geodatabase import raster
Hi Grant! You need to know your data. That is prio one. As the open API:s for file geodatabases do not support raster storage, you will need to get back to your supplier and request a data format you can handle. I nevers store rasters in gdb since it is a dead end. There are many other raster formats, well suited for GIS data to choose from. GeoTIFF and ecw are my favourites since they contain (or can contain) georeferencing information. Regards, Mats.E 2016-02-09 0:51 GMT+01:00 Grant Boxer <box...@iinet.net.au>: > Thank you for the information on the geodatabase files. It appears my > problem might be that the geodatabase files I am trying to open are raster > files. I can now open geodatabase vector files no problem – thanks to > everyone’s input. Should raster files also open, or is there a different > process required? > > > > Grant Boxer > > Consultant Geologist (*FAIG R.P. Geo*) > > Perth, Western Australia > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [QGis 2.10]Error while saving shape file
Hi Pierre! Your Id field, which you updated, is it the FID or Object ID field in the shapefile? If so, you have broken the shape file by updating it outside of ESRI applications. The FID is the internal key between the geometry and the dbase attribute table, and it should never be altered or trusted, or used for any purpose. Actually, QGis ought to hide that field by default. Regards, Mats.E 2016-02-08 14:34 GMT+01:00 Pierre Muckensturm <pie...@georezo.net>: > Hi, > > I use a QGis 2.10 version, X64 on Windows installed with Osgeo4W. > > I'll try to explain the bug. > > I work on a map, with a shape file of polygons. They are not really > complex, nor numerous (25). I got id,DOSSIER,NOM_OPERAT, > PRIORITE,COMMENTA,DATE_MAJ,SOURCE,LIBELLE_X, LIBELLE_Y > fields and SURF_HA which is a virtual field. > > Friday, it took me 5 min to save the file each time I modify a vertex. > > Today, I update my id field with the expression "$id". Then, my shape file > looks like a totally mess (look at the imgur album : > http://imgur.com/a/noSM2). The LIBELLE_X, LIBELLE_Y fields have > disappeard, the DOSSIER field which used to be null is now partially > fulled, the NOM_OPERAT are truncated, fulled in a completelly non-sense > manner. As for PRIORITE, DATE_MAJ. > > Conclusion, 2 days of work in a trash. I'm quite pissed off, according > with the fact that I'm trying to convince my superior we shall use QGis. > > So, what happened ? How could this happen ? Sorry but I don't have the > genuine files, and the data are quite sensitive. > > > -- > PLM > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Fwd: Installation of QGIS
Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. Vidarebefordrat brev: > Från: Mats Elfström <mats.elfst...@gmail.com> > Datum: 28 januari 2016 14:57:47 CET > Till: Matthias Kuhn <matth...@opengis.ch> > Ämne: Re: [Qgis-user] Installation of QGIS > > Hi! > I just scanned both the x86 and the x64 installers with Micrososft System > Center Endpoint Protection. > There was no virus warning. > With most, if not all Antivirus tools, you can scan a single selected file > before opening or executing it. > So I suggest that each make such a scan and report back positive/negative > virus warnings and Antivirus system. > I agree that this is most likely a false warning. > > Regards. Mats.E > > > > 2016-01-28 14:31 GMT+01:00 Matthias Kuhn <matth...@opengis.ch>: >> Have a look at the description: >> >> https://www.symantec.com/security_response/writeup.jsp?docid=2010-022501-5526-99 >> >> Trojan.Gen: >> >> Risk Level 1: Very Low >> >> Trojan.Gen is a generic detection for many individual but varied Trojans for >> which specific definitions have not been created. A generic detection is >> used because it protects against many Trojans that share similar >> characteristics. >> >> This looks like bad heuristics in the virus scanner to me and not like a >> problem on our side. >> >> Unless we are provided with the details of why this "generic detection" >> finds an undefined (that's what "specific definitions have not been >> created" translates to) trojan, the ball is on Symantec's court to be more >> specific about the problem. >> >> Matthias >> >> On 01/28/2016 02:19 PM, Richard Duivenvoorde wrote: >> > On 28-01-16 13:59, Flemming Damgaard Christensen wrote: >> > > Dear All >> > > >> > > I have just tried to instal QGIS 2.12.3 instead of my previous version >> > > 2.12. >> > > >> > > However there seens to be some Trojan software(Trojen.Gen) in the >> > > installation. It was found by Symantec virus scan >> > >> > Hi Flemming, >> > >> > Unless other people report this in upcoming hours, I think it is those >> > pesky virus scanners again: Windows Virus Scanners are known to give >> > false positives (Google for QGIS and Virus or Trojan). >> > >> > Regards, >> > >> > Richard >> > >> > ___ >> > Qgis-user mailing list >> > Qgis-user@lists.osgeo.org >> > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user >> > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user >> > >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> List info: http://lists.osgeo.org/mailman/listinfo/qgis-user >> Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > > > > -- > __ > Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden > tel: +46 46 145959 / mob: +46 70 595 39 35 > alt e-mail: mats.elfst...@giskraft.com > ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Boundless Opengeo Explorer and QGis map publishing
Hi! I am just curious: Has anybody ever had any use of the Boundless Opengeo Explorer? I am beginning to fear that I have spent a lot of money and utterly wasted weeks on an all but useless piece of software. There is absolutely no comprehensible connection between what I design in QGis and what eventually is put out from Geoserver. Only the most rudimentary cartography survives the transition, on random occasions. Good Night -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Shape file editing
Hi! Is it by design that shapefiles with subselected objects (in the layer definition) cannot be edited? QGis 2.10 on Windows 7 Enterprise. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] desktop icons on fresh windows
Hi! It is not uncommon that software asks politely for permission to add desktop icons. That is one suggestion. Another is to create a Qgis icon folder in the startup tree where the seldom used icons can be put in a sub folder under the standard Qgis desktop and browser icons. The icon folder should be named after the Qgis version, with a user option to rename it. This is how FME has done for years, which also incidently makes it easy to keep and adress parallel installations of a couple of older versions, as a precaution against disruptive bugs. I know of no other software that needs to explain what has been installed. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. > 22 jan. 2016 kl. 23:07 skrev Richard Duivenvoorde: > > Hi Users, > > I've installed QGIS for other beginning QGIS users recently. > > And almost 8 out of 10 are overwhelmed with the number of icons that are > place on their desktop, and do not know which one to 'start'. > > What about with a fresh windows install ONLY place th QGIS-Desktop > window on your desktop, all other stuff (designer, browser, cli etc etc) > are already available. > > Does this sound as a good idea? Please let me/us know... > > Second step is to find out how to do this :-) > > Regards, > > Richard > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS big fail in deleting Shapes!!
ly > prohibited. > > Whilst reasonable care has been taken to avoid virus transmission, no > responsibility for viruses is taken and it is your responsibility to carry > out such checks as you feel appropriate. > > If this email contains a quote or offer to sell products, carry out work > or perform services then our standard terms and conditions > <http://www.lutraconsulting.co.uk/downloads/Lutra%20Consulting%20Standard%20Terms%20and%20Conditions.pdf> > shall apply unless explicitly stated otherwise. > > Saber Razmjooei and Peter Wells trading as Lutra Consulting. > > > > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user > -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] FileGDB: missing FID column
Hi! Do not rely on the ESRI FID/ObjectID for any external purpose. It must be treated and considered as an internal ESRI geodatabase parameter, and can be unpredicatbly rewritten any time by ESRI processes. This goes for gdb tables as well as shapefiles. Of course, if you completely externalise the data, and never intend to link it back or use it in its original environment, you can keep the FID and use it for your own purposes. But since it is never more than a random integer, it may be even better to create a UID yourself. If you do this in the original table you can safely rely on that UID even if the ESRI FID is rewritten. It may be by purpose that you do not see the FID in QGIS, because of the above. Here is a similar question from a while back. Read the helpful replies. http://gis.stackexchange.com/questions/72495/how-to-copy-table-in-arcgis-for-desktop-and-keep-same-feature-id-objectid 2015-12-16 14:04 GMT+01:00 Thomas Schüttenberg <t.schuettenb...@mailbox.org> : > Hi! > > please can anybody tell me why the FID column of a fileGDB-Layer is > ignored and not shown in QGIS? > > I added a fileGDB via add vector layer>directory>type OpenFileGDB or > ESRI-FileGDB and everything > works fine and fast. > But when looking at the attribute table or the layer propeties the column > "objectid" is not there > although it is part of the data (see ogrinfo below). I tested this with > 2.8.4 and 2.12.1 > > The actual reason to fumble with the FileGDB is, that i want to transfer > this data to my PG. In this > import process (e.g. OGR processing "Import Vector into PostGIS database") > however the FID column is > also ignored. > A (new) FID/PK-column, that can be created during import is always filled > with fresh serial values - > not the original IDs from the data source -even when their name are the > same. > > The only way I see to solve / by-pass this (in my use case) is to > duplicate the objectids to a new, > seperate field befor doing the ogr-import. > > But maybe some of you could suggest a better solution (and save me from > the manual > table-editing-pain? ;-) > > thanks in advance > Thomas > > C:\Windows\System32>ogrinfo -so c:\zeug\kanal_end.gdb KaAnschlusspunkt > Had to open data source read-only. > INFO: Open of `c:\zeug\kanal_end.gdb' > using driver `OpenFileGDB' successful. > > Layer name: KaAnschlusspunkt > Geometry: Point > Feature Count: 3377 > Extent: (8.30, 11.186000) - (371550.148000, 5663269.606000) > Layer SRS WKT: > PROJCS["ETRS89 / UTM zone 32N", > GEOGCS["ETRS89", > DATUM["European_Terrestrial_Reference_System_1989", > SPHEROID["GRS 1980",6378137,298.257222101, > AUTHORITY["EPSG","7019"]], > TOWGS84[0,0,0,0,0,0,0], > AUTHORITY["EPSG","6258"]], > PRIMEM["Greenwich",0, > AUTHORITY["EPSG","8901"]], > UNIT["degree",0.0174532925199433, > AUTHORITY["EPSG","9122"]], > AUTHORITY["EPSG","4258"]], > PROJECTION["Transverse_Mercator"], > PARAMETER["latitude_of_origin",0], > PARAMETER["central_meridian",9], > PARAMETER["scale_factor",0.9996], > PARAMETER["false_easting",50], > PARAMETER["false_northing",0], > UNIT["metre",1, > AUTHORITY["EPSG","9001"]], > AXIS["Easting",EAST], > AXIS["Northing",NORTH], > AUTHORITY["EPSG","25832"]] > FID Column = OBJECTID > Geometry Column = Shape > PunktNr: String (0.0) > Punktkennung: String (0.0) > Kanalart: String (0.0) > ... > > -- > QGIS-DE e.V. | http://qgis.de > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: http://lists.osgeo.org/mailman/listinfo/qgis-user > Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] OpenGeo Explorer and QGIS 2.12.1
Hi! Can somebody confirm that the OpenGeo Explorer plugin from Boundless can be used for any practical purpose? I have spent countless hours of exasperated frustration trying to prove this. Positive answers will be rewarded with a more detailed error description. (else I will not bother) Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com <mats.elfst...@telia.com> ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Creating Geometries for tabular data
Hi! Martin is right. This is a piece of cake in MapInfo and a very useful work flow. The suggested method requires that you look up the object in the table and then copy its uid to the created object. This is an unefficient method. I have recently struggled to do the same in ArcGIS which proved to be just as inadequate as QGIS in this respect. MapInfo can create a spatial table without geometries, that is the difference. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 16 nov 2015 kl. 00:36 skrev Randal Hale: Probably the easiest way to do this would be a join - so if you made me do this I would do: 1. Create a layer (say a shapefile) with a point and a unique ID. 2. Make sure that Unique ID is reflected in your tabular data (point 1 has a corresponding '1' in the tabular data or a point of "Water Park" has a "Water Park" in your table) 3. Right click on your shapefile with the points (or polygons) and go to properties -> Joins. Pick your two fields that are the same - and join them. After a successful join right click and "save as" and make a new shapefile/Spatialite layer with all of your attributes. Randy Randal Hale North River Geographic Systems, Inchttp://www.northrivergeographic.com 423.653.3611 rjh...@northrivergeographic.com twitter:rjhale http://about.me/rjhalehttp://www.northrivergeographic.com/introduction-to-quantum-gis On 11/15/2015 06:22 PM, Martin Bain wrote: Hi, I’m after your suggestions for the best work flow for adding spatial data to existing tabular data. Say we have a tabular list of playground equipment – I want to associate a point object with each row in the list – so I end up with spatial and attribute data in the one table. I used to do this in MapInfo, you could open a table of purely tabular data, select a row in the attribute table, adding a point in the map window would create a map object for the selected row (rather than adding a whole new row to the table). I don’t think I can do it like that with QGIS – am I right in thinking if there is no geometry for a row it will be excluded from the attribute table? How do people do this in QGIS? Thanks, Martin. This email is intended for the named recipient only. The information it contains may be confidential. If you are not the intended recipient you must not reproduce or distribute any part of this email, disclose its contents to any other party or take any action in reliance on it. If you have received this email in error, please contact the sender immediately and delete the message. ___ Qgis-user mailing listqgis-u...@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: http://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Call for release name suggestions 2015
Once, Qgis versions were named after planetary moons. We probably ran out of those, at least those known to the public. However, they had the advantage of being unbiased, in terms of earth nations, language or ethnicity. Place names can be biased, like: now it's time for a latin american name and so on. May I suggest the periodic table of elements as base for the naming instead. By cleverly using the groups one could even indicate major/minor version changes. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. > 1 sep 2015 kl. 14:12 skrev Alexander Bruy: > > Hi Andreas, > > just to small correction. There was no hackfest in Moscow, only a > small user meeting. > > 2015-08-31 10:22 GMT+03:00 Andreas Neumann : >> Hi Anita, >> >> Well - we are not running out to soon of dev-meeting locations that haven't >> been used as release names yet: Essen, Hannover, Lyon, Nødebo, Zurich, Gran >> Canaria. Then there are the hackfests that are not in Middle Europe, such as >> Tokyo, Moscow. >> >> Also, there are 2 additional dev meetings each year. >> >> So I wouldn't be worried about names yet ;-) Enough names for years to come. >> >> Personally I would propose Essen for either the next release or the next LT >> release. We could ask the German QGIS user group to come up with a suitable >> map for Essen or a map of the Linux hotel. >> >> Andreas >> >> >> On 30.08.2015 19:29, Anita Graser wrote: >> >> Dear QGIS community, >> >> As you might know, given our new release cycle with three releases a year, >> we are sooner or later going to run out of release names based on developer >> meeting locations. This is why I would like to remind you to suggest release >> names. >> >> If you have been hosting QGIS user meetings or if you have founded a user >> group, why not suggest the meeting/foundling location? >> >> Here's a short description of what is needed to make a suggestion: >> >> - >> >> CALL for QGIS RELEASE NAME SUGGESTIONS >> >> The following rules apply: >> - The suggestion should be the name of a place. >> - The suggestion must not be the name of a software product. (Please try to >> do some Google searches before submitting the suggestion.) >> - Each suggestion must come with a suitable map image for splash design. >> (Make sure that we have the rights to use the image. Since the splash is >> also printed in our user guide, a minimum resolution of 3000x2000 px is >> necessary.) >> - Locations of developer meetings have priority. >> >> Submission format: Send an email with a short description of your suggestion >> and a link to a ZIP file containing the map image(s) to anitagra...@gmx.at >> >> - >> >> Best wishes, >> Anita >> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user >> >> >> >> ___ >> Qgis-user mailing list >> Qgis-user@lists.osgeo.org >> http://lists.osgeo.org/mailman/listinfo/qgis-user > > > > -- > Alexander Bruy > ___ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS instalation and uninstallation issues
Why does it have to be this hard to install amd maintain QGis on the most common os of the world? Not to mention QGis server which apparently no one manages to install. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 16 jul 2015 kl. 13:02 skrev Richard McDonnell richard.mcdonn...@opw.ie: Please see below, In my experience, if you want QGIS to work within Windows with some stability with GRASS and SAGA you need to use the OSGEO4W installer not the standalone. 1. Backup python Plugins(C:\OSGeo4W64\apps\qgis\python\plugins for Python Plugins) 2. Delete the OSGEO4W folder 3. If you have other versions of the software installed via standalone installers, uninstall all the Programs (QGIS,GRASS, SAGA etc) 4. Run a search for QGIS and delete any other folders (besides your Backup...be careful) 5. If you don't have ccleaner or similar install it, click on Registry (Left icon second from top), Scan for issues then Fix selected issues, repeat untill there are no issues. 6. Download most recent version of OSGEO4W installer (not standalone QGIS installer see http://trac.osgeo.org/osgeo4w/ ) 7. Do a standard Desktop instillation, It will install QGIS GRASS SAGA and uDig, R should also be installed (Im open to correction) 8. When you have finished over wright the plugins folder with the backup. 9. Now you may have some issues initially, but redirecting is easy enough, just direct everything to the corresponding OSGEO4W folder. This is what I remember having to do with my last instillation, I cant currently verify the above, as I don't have sufficient rights on my Work PC at present. Contact me if you run into any issues! Regards, Richard. On 15/07/2015 11:43, Evanilton Pires wrote: Dear QGIS users My name is Evanilton Edgar Serrão Pires, I am an Environmental Engineering student and a QGIS user. I started to use QGIS 2.2.0 Valmiera last year and since my first installation it never installed GRASS and SAGA correctly (their shortcut never appeared correctly and never worked, therefore I could never use those applications inside QGIS) . At that time I was using Windows 8. When I started QGIS it appeared a dialogue box saying «QGIS couldn't find your GRASS installation. Would you like to specify path (GISBASE) to your GRASS installation?». And inside QGIS, SAGA and GRASS algorithms never worked properly. With the new releases of QGIS 2.4.0 Chugiak and 2.6.0 Brighton, when uninstalling, it would uninstall and install normally, however, always telling me that the previous version was already installed at the time of the installation, although I uninstalled it previously. Early this year, I bought a new computer (which came with Windows 8.1 Single Language) and I installed QGIS 2.8.1 Wien in first place (the first app to be installed right when I bought the computer, after the anti-virus, of course) and for my joy, it installed GRASS and SAGA correctly and was working very well, in such way that I was very happy with it. However, on the 25th of May, I uninstalled the 2.8.1 version and installed the 2.8.2, but for my displeasure, the GRASS and SAGA plugins were not properly installed again. I went to the QGIS project website looking for solutions and I found a page saying that I should specify the path for the ''.exe'', but in the program folder there is no executor file. I even installed GRASS independently again and in the new installation folder there is no ''.exe'' either. When I install SAGA independently it does not work with QGIS. Another strange thing is that after I have uninstalled the 2.8.1 version and tried to install the 2.8.2, for the first time when installing it appeared the information of skipping all the folder creations and extractions, and at the end it said that QGIS was installed but the application did not exist in my computer. When I installed for the second time, it extracted and created the folders, and when finished QGIS was in my computer. Attached you may find the file it produced in the first attempt. I always install using the standalone-installer. If you need any further information, please let me know. What should I do? Is it normal for the software never be completely removed from the system? Please, I really would like to solve this issue. Hope to hear from you soon. QGIS is really good and useful, and I think we should promote its development. All the best to you guys ___ Qgis-user mailing listQgis-user@lists.osgeo.orghttp://lists.osgeo.org/mailman/listinfo/qgis-user OPW - Ag féachaint don am atá le teacht - Ag caomhnú ón am atá thart OPW - Looking to the future - Caring for the past http://www.opw.ie/ Email Disclaimer: http://www.opw.ie/en/disclaimer/ ___ Qgis-user mailing list Qgis-user@lists.osgeo.org
Re: [Qgis-user] QGIS instalation and uninstallation issues
I am sorry Sandro, but that kind of remark does not further our common cause; to make qgis useful for all. And if I had the tools and the knowledge, I would gladly help with my time. I have no funding to offer. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 16 jul 2015 kl. 15:41 skrev Sandro Santilli s...@keybit.net: On Thu, Jul 16, 2015 at 03:08:59PM +0200, Mats Elfström wrote: Why does it have to be this hard to install amd maintain QGis on the most common os of the world? Because the very few part of the world that develops QGIS hates to be trapped by such a defective-by-design OS ? --strk; ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] How to run QGIS Server on Windows 2012 server
Hi! I want to run a GIS stack with PostGIS, QGIS and QGIS Server on a Windows 2012 Cloud computer. Please tell me how to configure QGIS Server. I have PostGIS up and running and QGIS client too. Apache responds correctly. But there seems to be no connection to the QGIS Server. Get Capabilities gives an Internal error. I have tried to follow the handful of step-by-step instructions there are out there, none of which work. Incidently, two of them refer to each other. And they all seem to be slightly out of date, or mostly referring to other OS:es. One would want to find an authoritative and current instruction here http://hub.qgis.org/projects/quantum-gis/wiki/qgis_server_tutorial Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Geodata storage
Hi all! Bearing on a recent thread which in part discussed QGIS in mixed environments, I would like to raise the question of geodata storage. Choosing the right client for different tasks and needs is one thing, but they must all be able to access the same data. File based storage is out, for obvoius reasons, but that still leaves a handful of able geodatabase formats and vendors. Which, in your opinion, would be the most efficient geodatabase for a mixed ESRI-QGIS-AutoDesk environment? I have been struggling for some time to find a feasible platform and the strongest contestant today is PostgreSQL/PostGIS, possibly in combination with a WMS server. But while QGIS gladly accepts any version, ArcGIS stops at PostGIS 9.3 even at the latest 10.3 version. ArcSDE is not an option beacuse of the cost. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] OSGeo4W's QGIS Web Server install problem. “Not Found ... qgis_mapserv.fcgi”
-- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] SQL to update table
Hi Chuck! Another approach, which may be useful at other times, is to simply exclude these rows from label rendering. There may be times when you want to shut off certain labels without actually changing the table. This is done in the Rendering box of the labeler. Unbox Show all labels... and then write an appropriate expression below. In a PosGIS table, this expression was valid: fieldname IS NOT NULL HtH Mats.E 2015-03-14 22:57 GMT+01:00 Chuck Young wylie1...@gmail.com: I am trying to eliminate the text NULL from a table. I have imported a set of Tiger road data and in some of the columns that I need to display the data itr has NULL in the field. If it is Null I would really like that NOT to show up in the labeling on the map. I have tried some standard SQL update queries but they didn't work. I tried the following from the QSpatialite form that appears from within QGIS. Example: update mc-roadsegs Set RFROMHN = Where RFROMHN = NULL; I also tried to construct a query from within the query builf=der at the top of the Attribute table in Edit mode. I really need to remove these unwanted valued. It has been a while since I used SQL on a routine basis so I am a bit rusty. Any help will be much appreciated! Thanks Chuck ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Opengeo Explorer
What is the word on Opengeo Explorer and QGIS 2.8.1? I am on Windows server 2012 64 bit and pulled the plugin from Github. On a standalone QGIS 64 bit the plugin fails to start. I can post the error litany but it is maybe known that the plugin is broken. What other ways are there to publish to Geoserver? Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Deploying Qgis in an organisation.
Hi all! I am looking for hints on how to deploy Qgis as a desktop GIS tool for a limited number of users. My idea is to have a common program repository with plugins, a map and layer catalogue, and some basic settings, but still allow individual users to create their own work environment. In this way, updates and configuration changes need only be applied centrally, and distributed on program start to each user. This is a windows environment on a shared corporate network. I wish to avoid a manual installation for each user, which would be impossible to maintain and get out of sync at once. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] The Publish to web plugin
Hi! Googling publish to web qgis plugin returns 1700 hits. Still, I am unable to locate an installable package for said plugin. Closest hit is Lizmap which seems to be a commercial solution. Can somebody please shed a light on this? Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] The Publish to web plugin
Hi Paolo! So Lizmap is the same as the plugin referred to as 'Publish to web'? Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 26 okt 2014 kl. 15:42 skrev Paolo Cavallini cavall...@faunalia.it: Lizmap is free and open source (and quite nice too!). All the best. Il 26 ottobre 2014 10:50:17 CET, Mats Elfström mats.elfst...@gmail.com ha scritto: Hi! Googling publish to web qgis plugin returns 1700 hits. Still, I am unable to locate an installable package for said plugin. Closest hit is Lizmap which seems to be a commercial solution. Can somebody please shed a light on this? Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com -- Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- http://faunalia.eu/ Sent from mobile, sorry for being short ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Non Earth projection
Hi! I think that Priscilla does not mean another celestial body by 'non earth', but rather the old MapInfo concept of a non projected flat coordinate system. This is called a cartesian system, and would be useful in case QGIS is used to digitize scanned paper drawings for instance. In MapInfo, a cartesian table can be set up to a high resolution since such projects typically covers very small areas (printed drawings). Many years ago, when QGIS was still a toddler, I solved the problem by simply disregarding the projection factor since it would make a very small difference for a small area. But I did spend some time trying to create a flat projection. This failed, being a contradiction in terms. Regards, Mats.E 2014-09-30 18:06 GMT+02:00 Alex Mandel tech_...@wildintellect.com: On 09/30/2014 03:10 AM, Priscilla Maisie wrote: Hi, I need to work in a non earth map projection system. Can't locate the option on qgis. Is there a way I can create this? Regards, Priscilla Yes you can create your own projection in Settings-Custom CRS. You'll need to create your own proj4 compatible string. Comparing a few similar projections should help you figure out what you need. Note in recent versions of QGIS if you look in the Projection on the Fly dialog, there are several Mars projections and Coordinate systems. Need more help, please provide more information about the planet size/shape and type of projection. Other references, http://epsg.io and http://spatialreference.org Thanks, Alex ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] TAB file export
Hi all! For tricky spatial data management, I would like to recommend FME from Safe Software. No other tool offers the same platform independent toolbox, with complete and repeatable control over the process. You may find that tedious and complicated tasks that you usually perform in your production environment can be scripted and fully automated in FME, leaving you, the GIS professional more time for analysis and presentation of information. If you see the cost of FME as prohibitive, count the time you could use more productively (and perhaps charge) instead of trying to figure your way through command line tools with unpredictable results. Regards, Mats.E 2014-06-12 6:05 GMT+02:00 Bo Victor Thomsen bo.victor.thom...@gmail.com: Brett - I've opened your shape file in QGIS and afterwards saved it as a tab file - without a hitch. I'm using a newish version 2.3 of QGIS. I've opened the new tab file in MapInfo and it works. The only strange thing is, that the projection shifts from EPSG:28351 to EPSG:32751 Tabfile attached Regards Bo Victor Thomsen Aestas-GIS Denmark Den 12-06-2014 03:03, Brett Adams skrev: Zoltan, I'm running the ogr2ogr using ogr2gui. Is that cheating? I get in trouble with command line stuff. I can export a mid/mif, works perfectly every time. It's just not what the client wants. I've attached a sample SHP file. It was created by importing a CSV file then exporting as a SHP file. Donovan, I ran : Vector Geometry Tools Check Geometry Validity but came up with no errors. Couldn't find the Topology Checker plugin. Is that a version 2 feature? Thanks your feedback. I appreciate the effort. Brett -Original Message- From: qgis-user-boun...@lists.osgeo.org [mailto:qgis-user-boun...@lists.osgeo.org qgis-user-boun...@lists.osgeo.org] On Behalf Of Saulteau Don Sent: Thursday, 12 June 2014 3:53 AM To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] TAB file export Ross On 11/06/14 06:23, Brett Adams wrote: I keep getting an error Export to vector file failed. Error: Feature write errors: Feature creation error (OGR error: Failed writing geometry for feature id 1 in I usually get that error when some of the shapefile features are invalid. Did you get a chance to check for validity of the features in the shapefile? In QGIS you can use the Topology Checker plugin. Or Vector Geometry Tools Check Geometry Validity. Donovan ___ Qgis-user mailing listQgis-user@lists.osgeo.orghttp://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing listQgis-user@lists.osgeo.orghttp://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@giskraft.com mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] [Qgis-developer] A discussion: is qgis still affordable in Europe if it violate the Inspire directive ?
Hi! I have read this thread and I am puzzled. In my mind, standards and interoperability are good, and should be respected. Now tell me, is it a deliberate design choice not to make Qgis server OGC compliant, and if so, why? Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 8 jun 2014 kl. 08:51 skrev Andrea Peri aperi2...@gmail.com: Sorry Alex, As you certain know the The QGIS server is really far from be a good WMS Server. It has not the multy style rendering. It has not the named groups if don't allow to change the html response . It don't allow to return a GML response to the user in a GetFeatureInfo if don't active the WFS ption. This is obviously unacceptable. Because there is some layer that a Public Administration cannot put in download as they are. The GeoServer and MapServer are real WMS Server and they allow all of this and more other thinks. I don't speak of velocity where the coparing is impossible. But alsoin the rendering capable. I guess the Mapserver (the one that I know very well), has monay point of advantage on qgisserver. The ONLY question good of qgis is The project qgis is the the same in the server. But this mean only that the qgis-server is good for fast prototyping, no more. When go in production and the users grow the qgis-server will become rapidly a bottle of neck. So the investiment need to enhance the qgisserver to have a good and fast , fully complaince and affordable wms server are massive. This could be ask to a public admiistration to fund. But if it is not a compliant wms server it could not never choose to start. You think really that ths is a killer advantage that could put an administration to choose an incopmaptible with the WMS specs piece of software instead of a fully compliant with the WMS specs ? :)) Is really ore easy to invest on an author for GeoServer of for Mapserver rather than waste public fund in a Incompatible piece of software. Because the laws deny to choose it. I guess you can also hope to sell your service to someone . But if it ask you: Hey your software is compliant with OGC WMS ? This is a mandatory need for inspire. You what say to your possible future client ? Yes (but you say that the real response is NO) or say No hoping that it say no problemI fund it to became, using the public money and rejecting other more compliance and also opensource soltion as mapserver or geoserver. As an exmaple: We fund really many enhancement in qgis. And refund the same think when pass from 1.8 to 2.0. After the our product was break in the pass from 2.0 to2.2 and now go to refund again to have them work in the 2.4. Now the qgis release every 3-4 month. These mean that a public administration should plan to refund all thei product on qgis every 3-4 months ? I guess this is an example clear of what mena affordable and reliability. I guess no one public administration could fund an incompatible piece of software to became compatible when there is other solution availables and compatibles. Returning to the incompatible qustion: Who put the GetPrint tags in the getcapabilities response ? It was the only to have a direct and immediate advantage. I dont know why do this, but can expected that it sell its product to someone. I say : ok you have your advantage, you have take your money, and now ? You have destroyed the credibility of qgis as an WMS Server OGC. You choose to eat the egg today instead of take the chicken tomorrow, and now ? Are you happy of this ? I guess who break repair. So I guess the solution should be put and fund by who involontary or volontary (i don't know) break the WMS specs compatibility. Or otherwise the qgis group say: we don't care about the wms compatibility so choose other software for this work. But I guess there many service seller that go around to sell service on qgis and say that it is a server wms compiant with WMS specs. It is a really bad ok qgis is not usable for an OGC WMS infrastructure. If instead it is not happy of this it should repair what has break . I guess an public administration should not fund this reparation, otherwise every commite could think to have no proble to do what it like to do and after ask to the PA to fund for the repair from its break commit. Andrea. Il 08/06/2014 07:08, Alex Mandel ha scritto: You are assuming a new deployment and one where QGIS is not used on the desktop, where some groups may decide to use it for both in order to cut down on IT staffing requirements. You are also assuming the choice is as simple as picking a new one, there is plenty of people time involved in deploying a different strategy and redo-ing all the styling to fit the new way. Sure QGIS can push to geoserver now but running geosever means running a JAVA stack. Switching to Mapserver would be more similar with an apache setup but the QGIS export to Mapserver has long since fallen into disrepair so now you'd need to make
Re: [Qgis-user] DD to meters
http://lists.osgeo.org/mailman/listinfo/qgis-user -- Giovanni Allegri website: http://giovanniallegri.it GEO+ geomatica in Italia http://bit.ly/GEOplus -- -- Gemeinde Reichshof I/10 Zentrale Verwaltung Bernd Laskowski Hauptstra?e 12 51580 Reichshof - Denklingen Tel.: (02296) 801 - 313 Fax: (02296) 801 - 395 E-mail: bernd.laskow...@reichshof.de Der Inhalt dieser E-Mail ist ausschlie?lich f?r den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass jede Form der Kenntnisnahme, Ver?ffentlichung, Vervielf?ltigung oder Weitergabe des Inhalts dieser E-Mail unzul?ssig ist. Wir bitten Sie, sich in diesem Fall mit dem Absender der E-Mail in Verbindung zu setzen. Bei Abwesenheit des Adressaten, an den Sie eine E-Mail gerichtet haben, kann diese automatisch an dessen Vertreter weitergeleitet werden. Wir m?chten Sie au?erdem darauf hinweisen, dass die Kommunikation per E-Mail ohne Authentifizierung und Verschl?sselung unsicher ist, da f?r unberechtigte Dritte grunds?tzlich die M?glichkeit der Kenntnisnahme und Manipulation besteht. Wir ?bernehmen deshalb keine Verantwortung f?r den Inhalt dieser Nachricht, da eine Manipulation nicht ausgeschlossen werden kann. Obwohl wir alle angemessenen Vorkehrungen getroffen haben, um sicherzustellen, dass Anlagen dieser E-Mail Virus-gepr?ft sind, empfehlen wir dennoch, anh?ngende Dateien vor dem ?ffnen durch Ihr eigenes Virus-Programm zu pr?fen, da wir keinerlei Haftung f?r Sch?den ?bernehmen, die infolge etwaiger Software-Viren entstehen k?nnten. -- Giovanni Allegri website: http://giovanniallegri.it GEO+ geomatica in Italia http://bit.ly/GEOplus -- -- Gemeinde Reichshof I/10 Zentrale Verwaltung Bernd Laskowski Hauptstra?e 12 51580 Reichshof - Denklingen Tel.: (02296) 801 - 313 Fax: (02296) 801 - 395 E-mail: bernd.laskow...@reichshof.de Der Inhalt dieser E-Mail ist ausschlie?lich f?r den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass jede Form der Kenntnisnahme, Ver?ffentlichung, Vervielf?ltigung oder Weitergabe des Inhalts dieser E-Mail unzul?ssig ist. Wir bitten Sie, sich in diesem Fall mit dem Absender der E-Mail in Verbindung zu setzen. Bei Abwesenheit des Adressaten, an den Sie eine E-Mail gerichtet haben, kann diese automatisch an dessen Vertreter weitergeleitet werden. Wir m?chten Sie au?erdem darauf hinweisen, dass die Kommunikation per E-Mail ohne Authentifizierung und Verschl?sselung unsicher ist, da f?r unberechtigte Dritte grunds?tzlich die M?glichkeit der Kenntnisnahme und Manipulation besteht. Wir ?bernehmen deshalb keine Verantwortung f?r den Inhalt dieser Nachricht, da eine Manipulation nicht ausgeschlossen werden kann. Obwohl wir alle angemessenen Vorkehrungen getroffen haben, um sicherzustellen, dass Anlagen dieser E-Mail Virus-gepr?ft sind, empfehlen wir dennoch, anh?ngende Dateien vor dem ?ffnen durch Ihr eigenes Virus-Programm zu pr?fen, da wir keinerlei Haftung f?r Sch?den ?bernehmen, die infolge etwaiger Software-Viren entstehen k?nnten. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- Giovanni Allegri website: http://giovanniallegri.it GEO+ geomatica in Italia http://bit.ly/GEOplus -- next part -- An HTML attachment was scrubbed... URL: http://lists.osgeo.org/pipermail/qgis-user/attachments/20130313/e34b6b50/attachment.html -- ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user End of Qgis-user Digest, Vol 85, Issue 31 * ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Qgis tif to kmz?
No, no software could. It is two fundamentally different file types. I'ts like asking to convert a youtube movie to excel. Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 2 feb 2013 kl. 08:46 skrev Ben Jones bmjo...@iprimus.com.au: Dear All, Is it possible to use Qgis to convert a georeferenced tif image to a kmz file? Thanks, Ben Ben Jones bmjo...@iprimus.com.au ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] About QGIS on Windows - a follow up.
Hi! I am somewhat puzzled by a remark by Mr Paolo Cavallini in another thread. The poster there had experienced serious difficulties when updating his QGIS. His main mistake seems to be that he was running Windows, and Paolo wrote: *Please also remember that Windows packaging involves a tremendous amount of effort and skills, and it is being done as a favour for our Windows users. It would be good if someone could pay a developer to work on Windows (but also OSX, etc.) packaging. * I'd like to comment on this. Globally, according to http://www.w3schools.com/browsers/browsers_os.asp, some 84 % run Windows flavors, and 5 % are Linux users. Surely those numbers merit a little more than a 'favour' for Windows users? According to the QGIS download page, there are several Linux flavors of QGIS available, compared to 1 Windows version (in two packages). Is Linux packaging so easy that 10+ versions can be maintained without any effort? And last, who is paying for all the Linux oriented development and packaging going on, and do you keep funds separate for Linux and Windows work? I realize that I will be flamed for this, but as I am very fond of Open Source and QGIS, I am saddened by the disregard for the majority of computer users, many of whom do not even have the option to choose their operating system. Regards, Mats.E -- __ *GisKraft*, GIS och webkonsult Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 70 595 39 35 / web: www.giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] XYtools needs Excel python modules
There is a lot to be said about user friendliness here... Hälsning / Regards Mats.E Skickat från min / Sent from my iPhone, Ursäkta att jag är kortfattad / Excuse my brevity. 12 aug 2012 kl. 22:55 skrev Healthmaps rhosk...@u.washington.edu: Noli, Thanks a lot for helping me out yesterday. I really appreciate it. I learned a lot about several things. Best regards, Richard Anchorage, AK On Sat, 11 Aug 2012, Noli Sicad [via OSGeo.org] wrote: Richard, It seems that python27 is installed in Windows in this manner. C:/python27/lib/site-packages See this screenshot in this blog http://humairahmed.com/blog/?p=1654Noli ___ Qgis-user mailing list [hidden email] http://lists.osgeo.org/mailman/listinfo/qgis-user ___ If you reply to this email, your message will be added to the discussion below: http://osgeo-org.1560.n6.nabble.com/XYtools-needs-Excel-python-modules-tp4994635p4994643.html To unsubscribe from XYtools needs Excel python modules, click here. NAML -- View this message in context: Re: XYtools needs Excel python moduleshttp://osgeo-org.1560.n6.nabble.com/XYtools-needs-Excel-python-modules-tp4994635p4994704.html Sent from the Quantum GIS - User mailing list archivehttp://osgeo-org.1560.n6.nabble.com/Quantum-GIS-User-f4125267.htmlat Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] On format and coordinate systems transformation
Hi Group! I will begin this post with a disclaimer. This is no advertisement, or endorsed statement. I intend it as friendly advice to fellow professionals, for the good of the industry and our reputation. Many posts on this list come from users who struggle to move geodata between software systems or projections and coordinate systems. Several times a week or even per day, more or less tricky conversion problems are aired. This is a good thing. It shows that more people are using more geodata, and wants to combine data from various sources. This is one important purpose of a GIS. However, format conversion and coordinate transformation can be tricky business. If performed improperly, or with inadequate tools, mistakes can result in loss of information, or distorted or misplaced features. Such errors may be apparent, but can also go unnoticed, and later reflect badly on the person or institution that supplied the data. While I appreciate that all data handling tips on this list are given in good faith, I have seen those that are outright wrong, difficult or even dangerous, and not in line with what I judge to be Good Practice of our trade. There is really only one professional and system independent tool for all kinds of spatial data conversion, and that is FME from Safe Software. I would recommend no other. Only FME can safely handle the multitude of coordinate systems and the ever-evolving types and versions of file formats. Add to that the ability to extract, validate and combine data from different sources into a single workflow. The Workbench, where you graphically build your workflow is one of the best GUI:s I know. You can build very complicated workflows and save them for later use. For recurring conversion tasks, this ensures that each data transfer is performed exactly like before. Workbench files can be built by FME and GIS pros, and distributed for the use of others who just needs a task done. Quality does not come cheap, and I realize that the cost of FME can seem prohibitive. However, if you take into account the time and effort that people must use to try to tweak this tool here, or find that script there, with perhaps unpredictable results; you may find that the money for an FME license is well spent. On the other hand, consider the risk that lost or distorted information leads to costly damage further on in the chain. Whenever I attend a seminar or conference on GIS/GIT/mapping and surveying, people mention FME as an everyday tool: “Oh, and then we of course have some FME scripts to process the data.” The support from Safe Software is excellent. They depend on that their tools can be used, so problems and suggestions for improvement are dealt with promptly and kindly. There is always a fresh beta build available to try out the latest fixes or additions. Visit www.safe.com to find out more, and note that any flavor of FME Desktop can be downloaded for a free 14 day trial. Best Regards, Mats.E __ GisKraft, GIS och webkonsult Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 70 595 39 35 / web: www.giskraft.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Closure of forum
Hi! Simply find Google Groups and look there for QGISGRASS. Then apply for membership. At the moment, only members can view topics. Personally, I'm in favor of open groups, but this is at the managers discretion. Making the group free to read, but with restricted posting is a good alternative. Google Groups works very well for the MapInfo forum, MapInfo-L, and the FME forum FME Talk. I am a member of both. Every participant can choose how to take part in the forum, from receiving every post as e-mail, abridged daily summaries, or only reading it on the web. Regards, Mats.E Den 31 mars 2012 20:50 skrev Mark Hall mhall89...@att.net: How does one join the QGISGRASS group? -- *From:* Mats Elfström mats.elfst...@gmail.com *To:* Nick Hopton nhop...@gmail.com *Cc:* qgis-user@lists.osgeo.org *Sent:* Sat, March 31, 2012 10:30:52 AM *Subject:* Re: [Qgis-user] Closure of forum Hi! Start a Google Qgis group, or join the existing QGISGRASS group. That way all is taken care of, and no one needs to host or administer the thing. It could be fully open, or for registered users only. Regards, Mats.E Den 31 mars 2012 19:10 skrev Nick Hopton nhop...@gmail.com: I read QGIS-User on Nabble, where the posts on the closure of the forum appear somehow to have got mixed up with the Sextante thread, so forgive me for starting a new thread. The closure is a done deal I suppose but I think it will be harmful to QGIS. Forum users are now being pointed to Stack Exchange but many of them will, I believe, take one look at Stack Exchange and run a mile. The Stack Exchange GIS FAQ makes it quite clear that SE is intended for ...cartographers, database administrators, geographers, programmers, and anyone interested in or using GIS professionally. I don't fit into any one of these categories, nor I think would many of the people who used to post on the forum. They tended to be newcomers to QGIS, or people who make maps and use GIS as just a part of their job, or as part of a recreational activity, or any combination of the three. Some of them will be young and engaged in things like school projects. It would be nice to think that these people will shift to SE, but I can't see this happening. But we'll soon be able to tell, if things work as hoped a lot of newby-type questions should soon start appearing on SE. It will be interesting to see the responses. -- View this message in context: http://osgeo-org.1560.n6.nabble.com/Closure-of-forum-tp4674587p4674587.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Closure of forum
Hi! According to qgis.org, there are ten (10) current mailing lists for Qgis. If there is a need to fragment the communication that much, maybe a traditional forum with subgroups would be a better idea than my proposal for a Google group. I feel mailing lists are outdated. There are a lot of forum services to choose from. Regards, Mats.E Den 1 april 2012 10:11 skrev MORREALE Jean Roc jr.morre...@enoreth.net: The point of the forum closure is to avoid fragmentation of the greatest and the rarest resource we have to share with the users : brains. So unless you can keep a google group in sync with the official list , using a new place will not improve the situation in this regard. Le 01/04/2012 08:50, Mats Elfström a écrit : Hi! Simply find Google Groups and look there for QGISGRASS. Then apply for membership. At the moment, only members can view topics. Personally, I'm in favor of open groups, but this is at the managers discretion. Making the group free to read, but with restricted posting is a good alternative. Google Groups works very well for the MapInfo forum, MapInfo-L, and the FME forum FME Talk. I am a member of both. Every participant can choose how to take part in the forum, from receiving every post as e-mail, abridged daily summaries, or only reading it on the web. Regards, Mats.E Den 31 mars 2012 20:50 skrev Mark Hall mhall89...@att.net mailto:mhall89...@att.net: How does one join the QGISGRASS group? *From:* Mats Elfström mats.elfst...@gmail.com mailto:mats.elfstrom@gmail.**com mats.elfst...@gmail.com *To:* Nick Hopton nhop...@gmail.com mailto:nhop...@gmail.com *Cc:* qgis-user@lists.osgeo.org mailto:qgis-user@lists.osgeo.**orgqgis-user@lists.osgeo.org *Sent:* Sat, March 31, 2012 10:30:52 AM *Subject:* Re: [Qgis-user] Closure of forum Hi! Start a Google Qgis group, or join the existing QGISGRASS group. That way all is taken care of, and no one needs to host or administer the thing. It could be fully open, or for registered users only. Regards, Mats.E Den 31 mars 2012 19:10 skrev Nick Hopton nhop...@gmail.com mailto:nhop...@gmail.com: I read QGIS-User on Nabble, where the posts on the closure of the forum appear somehow to have got mixed up with the Sextante thread, so forgive me for starting a new thread. The closure is a done deal I suppose but I think it will be harmful to QGIS. Forum users are now being pointed to Stack Exchange but many of them will, I believe, take one look at Stack Exchange and run a mile. The Stack Exchange GIS FAQ makes it quite clear that SE is intended for ...cartographers, database administrators, geographers, programmers, and anyone interested in or using GIS professionally. I don't fit into any one of these categories, nor I think would many of the people who used to post on the forum. They tended to be newcomers to QGIS, or people who make maps and use GIS as just a part of their job, or as part of a recreational activity, or any combination of the three. Some of them will be young and engaged in things like school projects. It would be nice to think that these people will shift to SE, but I can't see this happening. But we'll soon be able to tell, if things work as hoped a lot of newby-type questions should soon start appearing on SE. It will be interesting to see the responses. __**_ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/**mailman/listinfo/qgis-userhttp://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Closure of forum
Hi! Start a Google Qgis group, or join the existing QGISGRASS group. That way all is taken care of, and no one needs to host or administer the thing. It could be fully open, or for registered users only. Regards, Mats.E Den 31 mars 2012 19:10 skrev Nick Hopton nhop...@gmail.com: I read QGIS-User on Nabble, where the posts on the closure of the forum appear somehow to have got mixed up with the Sextante thread, so forgive me for starting a new thread. The closure is a done deal I suppose but I think it will be harmful to QGIS. Forum users are now being pointed to Stack Exchange but many of them will, I believe, take one look at Stack Exchange and run a mile. The Stack Exchange GIS FAQ makes it quite clear that SE is intended for ...cartographers, database administrators, geographers, programmers, and anyone interested in or using GIS professionally. I don't fit into any one of these categories, nor I think would many of the people who used to post on the forum. They tended to be newcomers to QGIS, or people who make maps and use GIS as just a part of their job, or as part of a recreational activity, or any combination of the three. Some of them will be young and engaged in things like school projects. It would be nice to think that these people will shift to SE, but I can't see this happening. But we'll soon be able to tell, if things work as hoped a lot of newby-type questions should soon start appearing on SE. It will be interesting to see the responses. -- View this message in context: http://osgeo-org.1560.n6.nabble.com/Closure-of-forum-tp4674587p4674587.html Sent from the Quantum GIS - User mailing list archive at Nabble.com. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] MapInfo tab files?
Hi! On the MapInfo list, someone wanted to know why map styles in a MapInfo tab file does not show in Qgis. The answer was that the Qgis reader does not support it. This is a pity since one of the tab file advantages is the ability to store map styles. I would like to know if this is a deliberate decision by the Qgis developer, or if the libraries that Qgis uses are the problem. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] Can't get printed or plotted output
Hi Geologist! I think this is a memory problem, because of the size of your output. Can you print the exact same contents at the same size in on the same computer using ArcGis? If so, check the resolution settings. The chance is that qgis defaults to 600 dpi while 150 dpi might work. The difference is hardly visible on the hard copy. Hth, Mats.E Skickat från min iPhone 30 sep 2011 kl. 20:52 skrev Chris kierst cjkie...@yahoo.com: Hi people! Qgis newbie here, though I'm an experienced GIS user (ArcGIS), but not a guru, just a geologist. I created a map in Qgis and also three Print Composer instances. I set up one as a plotter file (Print Composer #1, 42 X 60) and another as a PDF (Print Composer #3, print as raster checked) after failing to get a completely plotted map document. The plotter output has a large area of empty paper in the middle as well as two narrow bands of empty space, all surrounded by the incomplete map. When I try the PDF workaround to simply get usable output that I can send to the plotter, I get an incomplete PDF document and a message Exception - bad allocation). Anyone have any suggestions? Not sure if this is a plotter problem, a Qgis garbage-in problem or ??? 1. Is there an organized Qgis printer/plotter troubleshooting forum that I can look at for some tips? 2. Is there an organized procedure that I must follow to ensure getting good output that I'm missing? ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] QGIS WMS problem
Hi! I'm testing a new WMS service. The service is password protected, but in Qgis, I can connect and get the available layers and all seems OK until I try to draw the layer. Qgis fails to to this and tells me: *Could not draw [layername] because:* and nothing more. Please name some possible causes for this? (suggestions to complete the sentence above). I have tried several image formats and alternate projections with no difference. Other public WMS services work as expected. The environment is Qgis 1.4.0 Enceladus build 12728 on a Windows XP SP3 machine. Regards, Mats.E -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS WMS problem
Hi Jürgen! I would if I could, but the instructions *Download: *http://trac.osgeo.org/osgeo4w/, Package *qgis-dev* in 'Advanced Installation' seems to be invalid. I cannot find that option. Regards, Mats.E 2010/6/3 Jürgen E. j...@norbit.de Hi Mats, On Thu, 03. Jun 2010 at 11:59:42 +0200, Mats Elfström wrote: I'm testing a new WMS service. The service is password protected, but in Qgis, I can connect and get the available layers and all seems OK until I try to draw the layer. Qgis fails to to this and tells me: Could not draw [layername] because: and nothing more. Please name some possible causes for this? (suggestions to complete the sentence above). I have tried several image formats and alternate projections with no difference. Other public WMS services work as expected. There have been quite some changes to the WMS provider, so trunk probably will work. Could you give it a try? Jürgen -- Jürgen E. Fischer norBIT GmbH Tel. +49-4931-918175-20 Dipl.-Inf. (FH) Rheinstraße 13Fax. +49-4931-918175-50 Software Engineer D-26506 Norden http://www.norbit.de -- norBIT Gesellschaft fuer Unternehmensberatung und Informationssysteme mbH Rheinstrasse 13, 26506 Norden GF: Jelto Buurman, HR: Amtsgericht Emden, HRB 5502 ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] IR-airphoto and 3D
Hi all! I agree, this software effort seems interesting enough to take a closer look at. However, I notice that the material on the website is not updated since 2008. I wonder why? Anyway, as an experienced photogrammetrist, I know that you need more than two random shots with sparse geometric info to create an oriented stereomodel. You mention corner coordinates. Do you have the ground elevation for these as well? Do you know the lens data? Ground control points? OK I know that you can compute a semblance of a 3D model from a number of random shots, but that will only be valid in it's own context without ground control. See if you can drape the images on the Google Earth surface? That may give you an idea of the topography if your area is not too small. I would suggest you follow the advice to obtain a ready made surface to drape your image on. Regards, Mats.E 2010/4/27 Ulf Almroth ulf.almr...@lillabjoern.se Johan, What you need is a photogrammetric package. I only know one open source package. Look at http://www.efoto.eng.uerj.br/en:start and download the latest version. It has all you need to accomplish your task, includning a modul for DEM (digital elevation model) extraction from the stereo pair. Yoy dont need dual screens, fancy cards and polaroid glasses. A split screen or re/blue glasses like som childrens books had when I was a kid will do. Note: I found this package recentlly and had no time to test it, but I am going to. There used to be another free package, photomodeler, but i don't think it is free anymore and anyway it is phocused on terrestrial and not on aerial images. Ulf Almroth - Original Message - From: Johan Nilsson joni8...@gmail.com To: qgis-user@lists.osgeo.org Sent: Monday, April 26, 2010 3:01 PM Subject: [Qgis-user] IR-airphoto and 3D I have very little knowlight of terminology in this area. Is there a possibility if you have 2 semi-overlapping IR-photo, with known flight-altitude, distance between picture, camera-model and pictures corners coordinat, to make a 3D model with height-data? To use 2 pictures to get stereo-vision, requere quite special dual-screens and gfx-card and polaroid-glasses, so to skip this, are there some other software that can pick altitude for every pixel in the area there 2 IR-photo cover?. If not QGIS have this, is there any other open source-applications to use, for instance GRASS that manage this, and what is the name of the process to make a 3D-map from at leaste 2 airphoto in GIS-terminology? /Cheers ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] bugfix and cheating
Hi Paolo. This is bad. I would expect Mr Coats to explain himself. Mats.E 2010/2/8 Paolo Cavallini cavall...@faunalia.it Hi all. As many of you know, our bug fixing initiative is very successful: with very limited investments several users have been able to have their bugs fixed in a very short time. Of course, the entire project is based on hard work, volunteering, goodwill, and trust. This generally works very well. Unfortunately I have to point out an unpleasant experience: one user (Greg Coats) requested a bug fix, relative to a slow start up, and on date 21.1.2010 offered: I will provide $1,000.00 for a verifiably solution that yields start up times from .qgs project files of no more than 30 seconds, delivered this month, and $500.00 for a solution delivered next month. The bug was promptly fixed the next day, thanks to Marco Hugentobler and others. The Greg asked an OSX executable to check the solution. Next day, this was ready, thanks to William Kyngesburye. Now Greg is surprisingly refusing to donate the promised amount. I believe this is unfair, and breaks the trust we are so rich of. In addition, he is complaining about the project management, which is even harder to understand. So, I'll have to be more careful with the next offers :( BTW: I invite everybody to donate for our upcoming hackfest: http://www.qgis.org/wiki/3._QGIS_Hackfest_in_Pisa_2010 Even small amounts (buy your preferred dev a beer, a pizza, etc!) are useful, and much appreciated. All the best. -- Paolo Cavallini: http://www.faunalia.it/pc ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user -- __ Mats Elfström, Väpplingvägen 21, SE-227 38 LUND, Sweden tel: +46 46 145959 / mob: +46 70 595 39 35 alt e-mail: mats.elfst...@telia.com ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] QGIS1.3.0 Mimas With GRASS - Windows Installer
Hi Kumaran! hank you very much! Very well done and much appeciated. I just tested your installation, it ran without any problem at all. After a quick run-through, everything you would need seems to be in place. Even the Python plug-in manager works perfectly. After the heated debate last week, I was going to make a step-by step test and evaluation of the other QGis Windows distros, but now I don't have to. Thank you once again Kumaran. Regards, Mats.E 2009/12/6 Kumaran Narayanaswamy kumaran.narayanasw...@kcubeconsulting.com Dear Members, There were quite a few requests for QGIS1.3.0 Mimas With GRASS - Windows standalone Installer. Users can download the standalone windows setup file from our website. http://kcubeconsulting.com/download.php Regards Kumaran ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] What is the matter with QGis versus MS Windows?
Hi! (this is a bit OT rant) What it the matter with Qgis versus MS Windows? According to w3schools, the windows family operating systems account for 90% of all users world wide. There is nothing to indicate that GIS people should differ from this pattern. Open source should not be platform dependent but I still claim that QGis is. There are dozens of Mac and Linux versions with funny names but only two Windows versions that apparently never works satisfactorily. I have all but given up recommending QGis for Windows systems. For those of you who like me belong to the unimaginative majority of windows users, take a look at MapWindow Open Source GIS http://www.mapwindow.org/ which installs and runs flawlessly on 90% of the worlds computers. Cheers, Mats.E ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
Re: [Qgis-user] What is the matter with QGis versus MS Windows?
Ok I'll take it all back the minute somebody writes to this list and reports a flawless, standalone QGis installation on any Windows system with all GRASS and Gdal dependencies working from the start. Don't you realize that many users never get to choose OS? Or needs to cooperate in environments where there is no choice? And I am really insulted by the accusation that I as a Windows user, automatically is regarded as an incompetent user with no care or concern about my system. I've worked with computers since 1984 and I have learned to take care of most problems. And I have invested lots of time and love and money doing that. I am using ESRI products. I am using MapInfo products. I am using FME. I am using MicroStation. And I am using Windows. I would like to confidently add QGis to my toolbox too, but resent being looked down upon. You seem to regard Windows as something the dog dragged in, writing 'people fiddling around with a Windows build' and so on. See if you can find it in your heart to indulge with us ordinary people who *has* to use Windows but still likes GIS and Open Source. I think the QGis user community would grow and profit from that, and open source efforts must behave like other software to gain acceptance. I will not debate this further. Regards, Mats.E 2009/11/29 Werner Macho werner.ma...@gmail.com Hi all! Usually I just don't answer to such emails but in this case I completely agree with Paolo. Moreover I'd like to say that nobody is forced to use Linux. Just use the operating system you think that is best for you. And as paolo said it seems that you're a user that don't want to invest something (time, money, love). So what? - if you use Windows - you obviously have enough money to buy it - so what about using GIS Software written just for Windows? (ESRI?) It is indeed just easier to compile and write open software with and under open software (sic!) I for my person can just say a big thank you to all the people fiddling around with a Windows build .. and releasing QGIS also for Windows. (brings me to the question why MapWindow is Windows only) I like the viewpoint of not asking which program is running best on my OS rather then which OS is working best with the program i like to use. Complaining about things others created is the easiest way to go.. Come on join us - and bring your experience with windows to QGIS. I know thats the harder way - but much more people would benefit from this way then from a complaining mail (wheres the bugreport?) and not recommending QGIS for Windows systems. But I still hope that you give QGIS a try from time to time when windows support is improved.. regards Werner On Sun, 2009-11-29 at 15:47 +0100, Paolo Cavallini wrote: Mats Elfström ha scritto: There are dozens of Mac and Linux versions with funny names but only two Windows versions that apparently never works satisfactorily. I have all but given up recommending QGis for Windows systems. Hi Mats. I think you are wrong: I do not use windows myself, but I am running a looong series of very successful courses, most of them on windows, and I always report all the problems encountered (see trac issues), which are very occasionally different on windows systems because of specific idiosyncrasies. The same can be said of OSX systems. What is true is that many (but not all, fortunately) windows users pretend a system that just works, without bothering to invest anything (time, money, love) on it. This is not how free software works. If you are using a piece of software, and you find a problem, you have the choice of fixing it yourself, or pay someone to fix it. Of course, you can always complain about it and/or stop using the program, it's your choice, but IMHO this is not the best option. All the best. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Why no proper QGis Windows installer yet?
Hi List! I take the liberty to start a new thread on this subject. I am currently having serious trouble using QGis because of the poor Windows support. I was happily using the second preview when I decided to upgrade to Kore. Then the trouble began. As described on the QGis forum, the so-called installer leaves out important components in the Express installation, and renders an unusable system if an Advanced installation is attempted. Why is this so? Open Source should not be restricted to non-windows operating systems. I think that's unfair, because many users are not at liberty to choose their operating system. The front page of the QGis.org site labels QGis *a user friendly Open Source Geographic Information System*. That is not true, if installing the program on Windows requires a manual assembly of bits and pieces from all over, tweaks here and there, with still no guarantee of a stable and functioning system. Would anybody care to explain what's going on, and if any improvement is in sight? Regards, Mats.E ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Re: Save
I'd like to reiterate the question below. 2009/3/16 Mats Elfström mats.elfst...@gmail.com Hi All! In the QGis 1.0 help, under section 9.1.4 it says: *To save the composer canvas as a templates, click on the button. Browse to the directory you like and save a template to use it again for another map canvas.* This is exactly what I need to do but cannot find 'the button'. Apparently the save and open buttons are missing from my Print Composer interface. QGis is recently installed with the OSGEO4W installer and reads QGis 1.0.1 - Kore. Any tips are most appreciated. Mats.E ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Save
Hi All! In the QGis 1.0 help, under section 9.1.4 it says: *To save the composer canvas as a templates, click on the button. Browse to the directory you like and save a template to use it again for another map canvas.* This is exactly what I need to do but cannot find 'the button'. Apparently the save and open buttons are missing from my Print Composer interface. QGis is recently installed with the OSGEO4W installer and reads QGis 1.0.1 - Kore. Any tips are most appreciated. Mats.E ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user
[Qgis-user] Select by attributes
Hi! What would be the simplest way to select elements by their geometric attributes in QGIS? In MapInfo, the SQL select string I need would look like this: select * from TableName where Area(obj, sq km) .5 As a workaround, I could populate an 'area' column in the table, but I would still need an Area() function to do that. Please do not suggest compiling this and that library from hist and here because this is a question from a vanilla QGIS user. Other than that, any help is appreciated. Regards, Mats.E ___ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user