Re: [ql-developers] HTTP server speed test

2004-02-16 Thread Peter Graf
Tony Firshman wrote:

 Unfortunately I have no second PC so I can only measure from PC to 
Q60 and
 vice versa.
 I am sure I have such a card.
 I will fit it in one of the nine PCs here tomorrow (5 run 24/7!) and
 test.   It may not be until the evening.

Many thanks!
I did have an NE2000.
However I am haivng trouble under W98.
It is not pnp but W98 found and installed it with NE2000 compat driver.
It though did not show up on my switch.
I connected the 'default' jumper, and it now show the 10mbps conneciton
LED, which flashed reassuringly on startup.
It also show up as working under device mgr.
However it is not finding my network.

Any ideas?  I have played with a few IRQs.
Default was 3, and it is now:
IRQ 9
I/O 0300-031F
All was fine with the existing pci card, which I removed.
Maybe selecting TCP/IP protocol under network bindings? However tinkering 
with your Windows settings looks like more trouble than this test is worth. 
I don't want you to waste too much precious time. Many thanks,

Peter




Re: [ql-developers] HTTP server speed test

2004-02-16 Thread Peter Graf
Tony Firshman wrote:

I have not managed to get my debian system to install a mouse
successfully, so only have command line.
Is there a command line ethereal?
Not that I know. If you only have a commandline, you could transfer the 
file with curl, which I remember to have a useful speed display. But it 
displays the payload rather than the raw data, so it will not directly 
compare to my figure. If it works I can measure with curl for comparison.

Peter




[ql-developers] HTTP server speed test

2004-02-15 Thread Peter Graf
Hi,

is somebody out there who owns two networked PCs, one with a 10 Mbit/sec 
ISA NE2000 (or clone) card, and could do a speed test using this PC as HTTP 
server?

With the Q60/QLwIP as server I currently get average 854 kBytes/sec HTTP 
throughput, measured with Ethereal, transferring a file larger than 10MB. 
It would be interesting how far from the optimal value this is still away.

My test setup:
Server: Q60/80, Realtek RTL8019AS ISA, QDOS Classic 3.25 Beta R, QLwIP
Client: Athlon 1.2 GHz, Realtek RTL8029AS PCI, RedHat Linux 9.0, Netscape 
browser

Unfortunately I have no second PC so I can only measure from PC to Q60 and 
vice versa.

Thanks,
Peter