Re: [qmailtoaster] Quota Issues
Shelly wrote: Hi. Maybe Im doing something wrong, however I setup virutal domains in vqadmin, and allow the domains to self manage through qmailadmin. The problem seems to be that while I can control the amount of accounts and forwards and so forth, when I set the quota in vq, its not reflected or used as the default within qmailadmin. Any ideas? Thanks You should probably use the vadddomain command for setting up virtual domains. There were some compatibility issues with vqadmin and quotas. I'm not familiar with the specifics, as I don't use vqadmin. See http://devel.qmailtoaster.com/faq.html#vqadmin Erik did create a patched version of vqadmin-toaster which supports valias. See http://devel.qmailtoaster.com/ Good luck. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation freezes system at courier-authlib-toaster
Thanks, I had no problems after replacing the memory.Erik Espinoza [EMAIL PROTECTED] wrote: Right, that's normal. Basically is just optimization flag. It willrequire a 386 chip and not use any specific stuff for chips higherthan 386. It will, however, tune for pentium4 so that it runs a littlefaster on pentium4.This will not cause issues. Good luck with the memory.Thanks,ErikOn 8/13/06, ccie 6862 <[EMAIL PROTECTED]>wrote: This is what I saw when the script started to install: RPM RELEASE: courier-imap-toaster-4.1.1-1.3.2 OS TYPE IS : CentOS 4 Linux BLD IS : Thu Jun 08 2006 CCFLAGS : -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -DHAVE_VLOGAUTH LDFLAGS : -O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -L/usr/include However, I think your previous post is what the problem is. I started running memtest after the last email as you suggested, and it started failing somewhere between 85-90%. I presume the system wasn't using this memory in the past, as I haven't even unracked the system in probably 1-1/2 years. I appreciate the insight. Take care. Al Erik Espinoza <[EMAIL PROTECTED]>wrote: Please paste the line you are referring to. Thanks, Erik On 8/13/06, ccie 6862 wrote: I could be a hardware problem, but I've been using the server a couple of years with no problems. This is a recent reload. Interestingly, I noticed that each time I ran the installation, it got a little farther. Eventually, it installed, but I'm not too confident that there won't be problems. There has been something catching my eyes during the installation. I see there is a "pentium4" switch setting. Given this is an Athlon processor, could this be a problem? Erik Espinoza wrote: Sounds like a hardware error to me. You may want to run memtest or something. Erik On 8/13/06, ccie 6862 wrote: Yes, it is installed: [EMAIL PROTECTED] ~]# rpm -q gcc-g77 gcc-g77-3.4.5-2 [EMAIL PROTECTED] ~]# "Eric \"Shubes\"" wrote: Sounds like you're probably missing a package that might not be in the requirements list. I have gcc-g77 installed. If you don't (# rpm -q gcc-g77), install it (# yum -y gcc-g77). Let us know if that does it or not. ccie 6862 wrote:Sorry about lacking info. Meant to include it. This is a fresh install of CentOS 4.3, and I'm using the "CentOS 4.3 qmailtoaster the easy way - Mail Server Only" installation guide. I'musing the GUI installation (the machine boots into run level 3, but I doa startx just to finish the installation). The system freezes on "shcnt40-install-script.sh". The following is installed: zlibdaemontools-toasterucspi-tcp-toastervpopmail-toasterlibdomainkeys-toasterqmail-toaster But, courier-authlib-toaster is next, and this is where it fails. Itfails at different places within this script, though. The first time itfroze, it was at a line stating it was check to see if a Fortrancompliler was being used, the second time I do recall a line that had"g77", and the third time (remotely through ssh with system in run level3) as shown below. checking if g++ PIC flag -fPIC works... yeschecking if g++ supports -c -o file.o... yeschecking whether the g++ linker (/usr/bin/ld) supports sharedlibraries... yeschecking dynamic linker characteristics... GNU/Linux ld.sochecking how to hardcode library paths into programs... immediatechecking whether stripping libraries is possible... yes(froze) Thanks for any direction. */"Eric \"Shubes\"" /* wrote: ccie 6862 wrote: I didn't see this particular problem addresses in the archives,but I'm attempting my first installation on a system that has a 1.9 GHz AMD Athlon processor. I have no problems until I get to the courier-authlib-toaster RPM, and the system freezes. I have toreboot, and when I reattempt the installation, it freezes the systemagain. I saw a note on the website stating that the packages can becustomized. Is this what I need to do? If so, any idea where in the package?Thank you. Al We could use a bit more information in order to help..) which distro?.) fresh distro installation?.) gui (X) installed? (more of a curiosity).) which instructions are you following?.) which install script are you running?.) what toaster packages are installed up to this point?.) at what point in the process does it freeze? (what's the lastthing you see?) ---Eric 'shubes' -QmailToaster hosted by: VR Hosted -To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED] __Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around
[qmailtoaster] QVCS migration
Title: QVCS migration Dear all, I am migrating an old QVCS server to a new Qmail-toaster-server. Does anybody have a script to move the domains from vmailmgr to vpopmail? Many tx! Best Regards, Harald
[qmailtoaster] Missing emails/Ignoring white_list
Hello list, I have the qmtoaster on Centos-4.3 and spamassassin-toaster-3.1.4-1.3.2.src.rpm. I am seeing an email for me while tailing logs, I go to my account and nothing is there. I have this sender whitelisted in local.cf and have run sa-learn as ham on this sender. We get slammed with so much spam that it is nearly impossible to feed sa-learn 50%good/50%junk but try our bets to maintain at least 60/40 no messages in the queue, any ideas where I should be looking appriciated. log snip @400044e072a1141c569c tcpserver: status: 3/100 @400044e072a1141c663c tcpserver: pid 17900 from (mysendersip) @400044e072a1141c6a24 tcpserver: ok 17900 mail.mymailserver.com:(myserverip):25 :(mysenderip)::2312 @400044e072a20654819c CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote mysender.com:unknown:(mysenderip) rcpt : sender accepted @400044e072a20c12ace4 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote cmysender.com:unknown:(mysenderip) rcpt [EMAIL PROTECTED] : found existing recipient @400044e072a217a84c1c tcpserver: end 17900 status 256 @400044e072a217b2ac5c tcpserver: status: 2/100 @400044e072a2180d66ec simscan:[1]:CLEAN (0.00/3.50):0.1108s::(mysenderip):: @400044e072a331f6f26c tcpserver: status: 3/100 - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Missing emails/Ignoring white_list
A.Mihalic wrote: Hello list, I have the qmtoaster on Centos-4.3 and spamassassin-toaster-3.1.4-1.3.2.src.rpm. I am seeing an email for me while tailing logs, I go to my account and nothing is there. I have this sender whitelisted in local.cf and have run sa-learn as ham on this sender. We get slammed with so much spam that it is nearly impossible to feed sa-learn 50%good/50%junk but try our bets to maintain at least 60/40 no messages in the queue, any ideas where I should be looking appriciated. log snip @400044e072a1141c569c tcpserver: status: 3/100 @400044e072a1141c663c tcpserver: pid 17900 from (mysendersip) @400044e072a1141c6a24 tcpserver: ok 17900 mail.mymailserver.com:(myserverip):25 :(mysenderip)::2312 @400044e072a20654819c CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote mysender.com:unknown:(mysenderip) rcpt : sender accepted @400044e072a20c12ace4 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote cmysender.com:unknown:(mysenderip) rcpt [EMAIL PROTECTED] : found existing recipient @400044e072a217a84c1c tcpserver: end 17900 status 256 @400044e072a217b2ac5c tcpserver: status: 2/100 @400044e072a2180d66ec simscan:[1]:CLEAN (0.00/3.50):0.1108s::(mysenderip):: @400044e072a331f6f26c tcpserver: status: 3/100 I don't even have a guess at this point. However, I'd be curious to see the corresponding spamd log entries in particular, and any other logs too. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [qmailtoaster] Strange one
Hi Guys Im still having some issues with this. I set myself up a yahoo email address and tried to get my password conformation etc sent to my account at my toaster and another account. The email was received at the other email account just fine, however not for the account on the toaster. After some investigation, I found the same issue that I originally reported. It shows up in the SMTP log, but doesn't get delivered to the mailbox. @400044dc8b7008645a84.s:@400044dc8a991f68cb5c CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote web27304.mail.ukl.yahoo.com:unknown:217.146.177.165 rcpt [EMAIL PROTECTED] : found existing recipient @400044dc8b7008645a84.s:@400044dc8a992f6ba40c simscan:[31984]:CLEAN (0.00/6.00):0.2628s:test:217.146.177.165:[EMAIL PROTECTED]:[EMAIL PROTECTED] net I followed the information posted by Dan, and removed all domain keys stuff from my tcp rules files and this is still happening, I'm stumped! Heres some config info: vpopmail-toaster-5.4.13-1.3.1 autorespond-toaster-2.0.4-1.3.1 qmailadmin-toaster-1.2.9-1.3.1 isoqlog-toaster-2.1-1.3.1 clamav-toaster-0.88.2-1.3.1 spamassassin-toaster-3.1.3-1.3.1 send-emails-toaster-0.5-1.2.9 ucspi-tcp-toaster-0.88-1.3.1 libdomainkeys-toaster-0.68-1.3.1 qmail-pop3d-toaster-1.03-1.3.3 ezmlm-cgi-toaster-0.53.324-1.3.1 qmailmrtg-toaster-4.2-1.3.1 maildrop-toaster-devel-2.0.2-1.3.1 vqadmin-toaster-2.3.4-1.3.1 ripmime-toaster-1.4.0.6-1.3.1 courier-authlib-toaster-0.58-1.3.1 control-panel-toaster-0.5-1.3.1 daemontools-toaster-0.76-1.3.1 qmail-toaster-1.03-1.3.3 ezmlm-toaster-0.53.324-1.3.1 maildrop-toaster-2.0.2-1.3.1 squirrelmail-toaster-1.4.6-1.3.1 simscan-toaster-1.2-1.3.1 courier-imap-toaster-4.1.1-1.3.2 ### 127.:allow,RELAYCLIENT= *.*.:allow,RELAYCLIENT=,QMAILQUEUE=/var/qmail/bin/simscan *.*.:allow,RELAYCLIENT=,QMAILQUEUE=/var/qmail/bin/simscan :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_W RONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKQUEUE=/var/qma il/bin/qmail-queue.orig Please note that ive Stared (*) out my ip ranges. Any help would be much appreciated! Best Regards Josh Dinsdale IT Engineer Navigate Solutions Innovation Centre St Cross Business Park Newport, IW PO30 5WB T: 01983 550360 E: [EMAIL PROTECTED] W: www.navigatesolutions.co.uk IT Excellence Executed -Original Message- From: Eric Shubes [mailto:[EMAIL PROTECTED] Sent: 11 August 2006 19:40 To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Strange one Since it's working now, I suppose that's the important thing. If you care to use domainkeys (which yahoo does), follow the directions on the wiki, and see if that doesn't solve your problem. Dan Herbon wrote: It is a fresh qmailtoaster install on CentOS 4.3. I havn't setup any DomainKeys on the server. TCP.SMTP file: - 127.:allow,RELAYCLIENT= :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_W RONG RCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKQUEUE=/var/qmail/b in/q mail-queue.orig - Qmail Toaster RPMs: # rpm -qa | grep toaster libdomainkeys-toaster-0.68-1.3.1 courier-imap-toaster-4.1.1-1.3.2 ezmlm-cgi-toaster-0.53.324-1.3.1 maildrop-toaster-devel-2.0.2-1.3.1 spamassassin-toaster-3.1.3-1.3.1 simscan-toaster-1.2-1.3.1 daemontools-toaster-0.76-1.3.1 vpopmail-toaster-5.4.13-1.3.1 qmail-toaster-1.03-1.3.5 courier-authlib-toaster-0.58-1.3.1 autorespond-toaster-2.0.4-1.3.1 ezmlm-toaster-0.53.324-1.3.1 qmailadmin-toaster-1.2.9-1.3.1 maildrop-toaster-2.0.2-1.3.1 isoqlog-toaster-2.1-1.3.1 squirrelmail-toaster-1.4.7-1.3.2 ripmime-toaster-1.4.0.6-1.3.1 ucspi-tcp-toaster-0.88-1.3.1 qmail-pop3d-toaster-1.03-1.3.5 control-panel-toaster-0.5-1.3.1 qmailmrtg-toaster-4.2-1.3.1 vqadmin-toaster-2.3.4-1.3.1 clamav-toaster-0.88.3-1.3.2 My spf file: # cat /var/qmail/control/spfbehavior 3 -Original Message- From: Eric Shubes [mailto:[EMAIL PROTECTED] Sent: Friday, August 11, 2006 1:30 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Strange one That's interesting. When I set up domainkeys on my machine, I used my yahoo email to test and receive from my toaster, and everything worked ok, including groups. Have you set up anything on the toaster that's dk related? I would expect incoming dk checking to work ok without setting up keys for outbound, but apparently that's not the case. Please show us your tcp.smtp, and # rpm -qa | grep toaster. Dan Herbon wrote: I removed all instances of anything DK in the /etc/tcprules.d/tcp.smtp except for DKQUEUE=/var/qmail/bin/qmail-queue.orig. I rebuilt the db with qmailctl cdb and stop and started qmail for the hell of it. Now I am able to receive messages from yahoo groups. Don't know why, but its working.
Re: [qmailtoaster] Missing emails/Ignoring white_list
And of course, as soon as, I leave for a bit this one sneaks into the box while my back was turned. ( did not get a match on spamdlog..yet) This has happened a few times, made me nervousI do hope that its a sender problem. snip of once in a while completed delivery Return-Path: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: (qmail 26533 invoked by uid 89); 14 Aug 2006 16:03:54 - DomainKey-Status: no signature Received: by simscan 1.2.0 ppid: 26525, pid: 26527, t: 19.2100s scanners: attach: 1.2.0 clamav: 0.88.3/m:39/d:1646 spam: 3.1.4 X-Spam-Checker-Version: SpamAssassin 3.1.4 (2006-07-25) on mail.mymail.net X-Spam-Level: X-Spam-Status: No, score=-96.3 required=3.2 tests=AWL,BAYES_00,HTML_10_20, HTML_IMAGE_ONLY_20,HTML_LINK_IMAGE_BUG,HTML_MESSAGE, HTML_SHORT_LINK_IMG_3,HTML_TEXT_AFTER_HTML,JV_Junk3r,MIME_HTML_ONLY, USER_IN_WHITELIST autolearn=no version=3.1.4 Received: from unknown (HELO mysender.com) (mysenderip) by mail.mymail.net with (EDH-RSA-DES-CBC3-SHA encrypted) SMTP; 14 Aug 2006 16:03:35 - Received-SPF: pass (mail.mymail.net: SPF record at mysender.com designates (senderip) as permitted sender) Received: from AspEmail ([(senderip)]) by mysender.com (mmysender Mail Server V1.5) with ASMTP id 048E177C for [EMAIL PROTECTED]; Mon, 14 Aug 2006 08:38:50 -0700 will watch again tomorrow when mysender.com batches to me for a good log match - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Qmail Toaster as Exchange MTA
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 I am using Qmail Toaster as our Exchange MTA and was wondering if there was a way to use the chkuser patch the same way that the validrcptto patch can be used. I am wanting to import a list of e-mail addresses from the Exchange box into the Qmail box to cut down on undeliverable spam. -BEGIN PGP SIGNATURE- Version: PGP Desktop 9.0.6 (Build 6060) iQEVAwUBROC89Uj1lc0bjeRJAQh2KwgAk5kXQZlY7Z8UoGRyn129TzN1EevrEkZM f7p4mveoRKP6gWyZQeqUWdt1aRGJH9KeDoeYogMFv3POPPTWVGW5J0LP/jQxPJoh 0w19dCXfvO/Gd9AfCCSI4FtxzizuWk4QJsIQaMDhig7ZF7RtwsPHjySA7M/i8AeB rkuBWtwuciqWzuYqMzMNMU5xhK2z75ghbSY+QJv+VjM6ZyvQrPiUeCLw8tIvBOCg LOAem0ED7AQgKrjx70CrhO7IBFTSmbV8PMgm5/i++4Deh09ayhpWaOTXffkNbKrI oPvBmcGpT3N98pdbYCX14KN9rcO18Adkf5A8hyOxr3HQF1Xdy7zeEQ== =5638 -END PGP SIGNATURE- PGPexch.htm.pgp Description: PGPexch.htm.pgp - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] moving to qmail-toaster from a src install
Eric Shubes wrote: I don't know how you might bring encrypted passwords over. You might be able to dump the encrypted passwords from the old system, then use native SQL to update them into the database once the users have been added (with whatever new temporary password). I don't know if that'd work or not, so I'd test it out first before committing to that route. It might be simplest just to give everyone a new password. That's a call you'll need to make. After looking some more, it appears the vadduser command from vpopmail has an option, -e, to pass an encrypted password. vadduser from vmailmgr has the same option but it is to set the expiration date on the account. Thanks for your help, Eric. I posting this to help out folks in the future. Here is the script I intend on using to migrate from vmailmgr to vpopmail. Beware, this is stream of conscious coding and it has not been tested (much): #!/bin/bash #listvdomain=`listvdomain -a` # for aliases finish=/tmp/vmail2vpoplist listvdomain=listvdomain -u # for users dumpvuser=./dumpvuser out=/tmp/vmailmigrate out2=/tmp/vmailmigrate2 $listvdomain $out list=`awk '{print $1}' $out` for userinfo in $list; do if [ $userinfo = User ]; then continue; fi if [ $userinfo = 'Mailbox' ] ; then continue; fi if [ $userinfo = 'Aliases' ] ; then continue; fi $dumpvuser $userinfo $out2 tmp=`awk '/Encrypted-Password/ {print ENVIRON[userinfo] $2}' $out2` echo $userinfo $tmp $finish done EOF The above will format the users/pass so you can use this command to import into the vpopmail server: awk 'system(vadduser -e $2 [EMAIL PROTECTED])' /tmp/vmail2vpoplist I have not tested the second command. One need not use awk to parse the list file. I hope this helps someone out as I have not found any scripts to migrate vmailmgr to vpopmail available on the internet. Regards, Dave T Phatcom.net - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] spamassassin version 3.1.3 or 3.1.1?
Hi all, i installed toaster on SuSE10.1 box week ago. Everything was looking ok. but.. i found in /var/log/qmail/spamd log files lines that scripts version is different to module version. I have log files bigger than 100M per day! and CPU running around 80% only for spamd.. I reinstalled spamassassin by version from qmail-toaster main pages - nothing change. Do you have some idea? Jaromir Nemecek Brno, Czech Rep. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Qmail Toaster as Exchange MTA
You can create an alias for each user in the qmailtoaster. The best way to do that would be to use the command line interface to handle this. So you have two boxes with the following DNS (can be replaced with anything): qmail.domain.com exchange.domain.com Point MX to qmail.domain.com Create alias for each [EMAIL PROTECTED] to [EMAIL PROTECTED] Make sure that the exchange server is setup to accept mail for domain.com as primary, but can accept for exchange.domain.com for all users. That should take care of it. Erik On 8/14/06, Carrigan, Jeremy [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 I am using Qmail Toaster as our Exchange MTA and was wondering if there was a way to use the chkuser patch the same way that the validrcptto patch can be used. I am wanting to import a list of e-mail addresses from the Exchange box into the Qmail box to cut down on undeliverable spam. -BEGIN PGP SIGNATURE- Version: PGP Desktop 9.0.6 (Build 6060) iQEVAwUBROC89Uj1lc0bjeRJAQh2KwgAk5kXQZlY7Z8UoGRyn129TzN1EevrEkZM f7p4mveoRKP6gWyZQeqUWdt1aRGJH9KeDoeYogMFv3POPPTWVGW5J0LP/jQxPJoh 0w19dCXfvO/Gd9AfCCSI4FtxzizuWk4QJsIQaMDhig7ZF7RtwsPHjySA7M/i8AeB rkuBWtwuciqWzuYqMzMNMU5xhK2z75ghbSY+QJv+VjM6ZyvQrPiUeCLw8tIvBOCg LOAem0ED7AQgKrjx70CrhO7IBFTSmbV8PMgm5/i++4Deh09ayhpWaOTXffkNbKrI oPvBmcGpT3N98pdbYCX14KN9rcO18Adkf5A8hyOxr3HQF1Xdy7zeEQ== =5638 -END PGP SIGNATURE- - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [qmailtoaster] Strange one
I guess you can also try decreasing your SPF behavior from the default 3 to 1 and restart qmail. This might help it. /var/qmail/control/spfbehavior Dan -Original Message- From: Josh Dinsdale [mailto:[EMAIL PROTECTED] Sent: Monday, August 14, 2006 10:28 AM To: qmailtoaster-list@qmailtoaster.com Subject: RE: [qmailtoaster] Strange one Hi Guys Im still having some issues with this. I set myself up a yahoo email address and tried to get my password conformation etc sent to my account at my toaster and another account. The email was received at the other email account just fine, however not for the account on the toaster. After some investigation, I found the same issue that I originally reported. It shows up in the SMTP log, but doesn't get delivered to the mailbox. @400044dc8b7008645a84.s:@400044dc8a991f68cb5c CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote web27304.mail.ukl.yahoo.com:unknown:217.146.177.165 rcpt [EMAIL PROTECTED] : found existing recipient @400044dc8b7008645a84.s:@400044dc8a992f6ba40c simscan:[31984]:CLEAN (0.00/6.00):0.2628s:test:217.146.177.165:[EMAIL PROTECTED]:[EMAIL PROTECTED] net I followed the information posted by Dan, and removed all domain keys stuff from my tcp rules files and this is still happening, I'm stumped! Heres some config info: vpopmail-toaster-5.4.13-1.3.1 autorespond-toaster-2.0.4-1.3.1 qmailadmin-toaster-1.2.9-1.3.1 isoqlog-toaster-2.1-1.3.1 clamav-toaster-0.88.2-1.3.1 spamassassin-toaster-3.1.3-1.3.1 send-emails-toaster-0.5-1.2.9 ucspi-tcp-toaster-0.88-1.3.1 libdomainkeys-toaster-0.68-1.3.1 qmail-pop3d-toaster-1.03-1.3.3 ezmlm-cgi-toaster-0.53.324-1.3.1 qmailmrtg-toaster-4.2-1.3.1 maildrop-toaster-devel-2.0.2-1.3.1 vqadmin-toaster-2.3.4-1.3.1 ripmime-toaster-1.4.0.6-1.3.1 courier-authlib-toaster-0.58-1.3.1 control-panel-toaster-0.5-1.3.1 daemontools-toaster-0.76-1.3.1 qmail-toaster-1.03-1.3.3 ezmlm-toaster-0.53.324-1.3.1 maildrop-toaster-2.0.2-1.3.1 squirrelmail-toaster-1.4.6-1.3.1 simscan-toaster-1.2-1.3.1 courier-imap-toaster-4.1.1-1.3.2 ### 127.:allow,RELAYCLIENT= *.*.:allow,RELAYCLIENT=,QMAILQUEUE=/var/qmail/bin/simscan *.*.:allow,RELAYCLIENT=,QMAILQUEUE=/var/qmail/bin/simscan :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_W RONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKQUEUE=/var/qma il/bin/qmail-queue.orig Please note that ive Stared (*) out my ip ranges. Any help would be much appreciated! Best Regards Josh Dinsdale IT Engineer Navigate Solutions Innovation Centre St Cross Business Park Newport, IW PO30 5WB T: 01983 550360 E: [EMAIL PROTECTED] W: www.navigatesolutions.co.uk IT Excellence Executed -Original Message- From: Eric Shubes [mailto:[EMAIL PROTECTED] Sent: 11 August 2006 19:40 To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Strange one Since it's working now, I suppose that's the important thing. If you care to use domainkeys (which yahoo does), follow the directions on the wiki, and see if that doesn't solve your problem. Dan Herbon wrote: It is a fresh qmailtoaster install on CentOS 4.3. I havn't setup any DomainKeys on the server. TCP.SMTP file: - 127.:allow,RELAYCLIENT= :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_W RONG RCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKQUEUE=/var/qmail/b in/q mail-queue.orig - Qmail Toaster RPMs: # rpm -qa | grep toaster libdomainkeys-toaster-0.68-1.3.1 courier-imap-toaster-4.1.1-1.3.2 ezmlm-cgi-toaster-0.53.324-1.3.1 maildrop-toaster-devel-2.0.2-1.3.1 spamassassin-toaster-3.1.3-1.3.1 simscan-toaster-1.2-1.3.1 daemontools-toaster-0.76-1.3.1 vpopmail-toaster-5.4.13-1.3.1 qmail-toaster-1.03-1.3.5 courier-authlib-toaster-0.58-1.3.1 autorespond-toaster-2.0.4-1.3.1 ezmlm-toaster-0.53.324-1.3.1 qmailadmin-toaster-1.2.9-1.3.1 maildrop-toaster-2.0.2-1.3.1 isoqlog-toaster-2.1-1.3.1 squirrelmail-toaster-1.4.7-1.3.2 ripmime-toaster-1.4.0.6-1.3.1 ucspi-tcp-toaster-0.88-1.3.1 qmail-pop3d-toaster-1.03-1.3.5 control-panel-toaster-0.5-1.3.1 qmailmrtg-toaster-4.2-1.3.1 vqadmin-toaster-2.3.4-1.3.1 clamav-toaster-0.88.3-1.3.2 My spf file: # cat /var/qmail/control/spfbehavior 3 -Original Message- From: Eric Shubes [mailto:[EMAIL PROTECTED] Sent: Friday, August 11, 2006 1:30 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Strange one That's interesting. When I set up domainkeys on my machine, I used my yahoo email to test and receive from my toaster, and everything worked ok, including groups. Have you set up anything on the toaster that's dk related? I would expect incoming dk checking to work ok without setting up keys for outbound, but apparently that's not the case. Please show us your tcp.smtp, and # rpm -qa | grep toaster. Dan Herbon
Re: [qmailtoaster] Missing emails/Ignoring white_list
A.Mihalic wrote: And of course, as soon as, I leave for a bit this one sneaks into the box while my back was turned. ( did not get a match on spamdlog..yet) This has happened a few times, made me nervousI do hope that its a sender problem. snip of once in a while completed delivery Return-Path: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: (qmail 26533 invoked by uid 89); 14 Aug 2006 16:03:54 - DomainKey-Status: no signature Received: by simscan 1.2.0 ppid: 26525, pid: 26527, t: 19.2100s scanners: attach: 1.2.0 clamav: 0.88.3/m:39/d:1646 spam: 3.1.4 X-Spam-Checker-Version: SpamAssassin 3.1.4 (2006-07-25) on mail.mymail.net X-Spam-Level: X-Spam-Status: No, score=-96.3 required=3.2 tests=AWL,BAYES_00,HTML_10_20, HTML_IMAGE_ONLY_20,HTML_LINK_IMAGE_BUG,HTML_MESSAGE, HTML_SHORT_LINK_IMG_3,HTML_TEXT_AFTER_HTML,JV_Junk3r,MIME_HTML_ONLY, USER_IN_WHITELIST autolearn=no version=3.1.4 Received: from unknown (HELO mysender.com) (mysenderip) by mail.mymail.net with (EDH-RSA-DES-CBC3-SHA encrypted) SMTP; 14 Aug 2006 16:03:35 - Received-SPF: pass (mail.mymail.net: SPF record at mysender.com designates (senderip) as permitted sender) Received: from AspEmail ([(senderip)]) by mysender.com (mmysender Mail Server V1.5) with ASMTP id 048E177C for [EMAIL PROTECTED]; Mon, 14 Aug 2006 08:38:50 -0700 will watch again tomorrow when mysender.com batches to me for a good log match Like Dan mentioned on another thread, try throttling SPF back to 1 (/var/qmail/control/spfbehavior) from 3. I wasn't sure if SPF checking happens before or after simscan, but I *do* know that you won't see a log entry anywhere when there's an SPF rejection. This is a real deficiency (imho), not having SPF rejections logged. We should look into getting this fixed (even if SPF isn't the cause of this problem). -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Missing emails/Ignoring white_list
Hey ES, Would you mind sending info to the developer of the SPF patch. Let's try to get this fixed upstream so that it can incorporate the fix. http://www.saout.de/misc/spf/ Thanks, Erik On 8/14/06, Eric Shubes [EMAIL PROTECTED] wrote: A.Mihalic wrote: And of course, as soon as, I leave for a bit this one sneaks into the box while my back was turned. ( did not get a match on spamdlog..yet) This has happened a few times, made me nervousI do hope that its a sender problem. snip of once in a while completed delivery Return-Path: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: (qmail 26533 invoked by uid 89); 14 Aug 2006 16:03:54 - DomainKey-Status: no signature Received: by simscan 1.2.0 ppid: 26525, pid: 26527, t: 19.2100s scanners: attach: 1.2.0 clamav: 0.88.3/m:39/d:1646 spam: 3.1.4 X-Spam-Checker-Version: SpamAssassin 3.1.4 (2006-07-25) on mail.mymail.net X-Spam-Level: X-Spam-Status: No, score=-96.3 required=3.2 tests=AWL,BAYES_00,HTML_10_20, HTML_IMAGE_ONLY_20,HTML_LINK_IMAGE_BUG,HTML_MESSAGE, HTML_SHORT_LINK_IMG_3,HTML_TEXT_AFTER_HTML,JV_Junk3r,MIME_HTML_ONLY, USER_IN_WHITELIST autolearn=no version=3.1.4 Received: from unknown (HELO mysender.com) (mysenderip) by mail.mymail.net with (EDH-RSA-DES-CBC3-SHA encrypted) SMTP; 14 Aug 2006 16:03:35 - Received-SPF: pass (mail.mymail.net: SPF record at mysender.com designates (senderip) as permitted sender) Received: from AspEmail ([(senderip)]) by mysender.com (mmysender Mail Server V1.5) with ASMTP id 048E177C for [EMAIL PROTECTED]; Mon, 14 Aug 2006 08:38:50 -0700 will watch again tomorrow when mysender.com batches to me for a good log match Like Dan mentioned on another thread, try throttling SPF back to 1 (/var/qmail/control/spfbehavior) from 3. I wasn't sure if SPF checking happens before or after simscan, but I *do* know that you won't see a log entry anywhere when there's an SPF rejection. This is a real deficiency (imho), not having SPF rejections logged. We should look into getting this fixed (even if SPF isn't the cause of this problem). -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Ayuda __ helpp-- please.
Hello. I need to know if it is possible to put the antivirus by whatever or usuary of vpopmail, and not of global form Gracias Hola.. necesito saber si es posible poner el antivirus por cuanta o usuarios de vpopmail, y no de forma global Gracias
Re: [qmailtoaster] Missing emails/Ignoring white_list
Sure, EE. Should be able to get to it later today. (now why didn't I think of that?? :) ) Thanks for the link. Erik Espinoza wrote: Hey ES, Would you mind sending info to the developer of the SPF patch. Let's try to get this fixed upstream so that it can incorporate the fix. http://www.saout.de/misc/spf/ Thanks, Erik On 8/14/06, Eric Shubes [EMAIL PROTECTED] wrote: A.Mihalic wrote: And of course, as soon as, I leave for a bit this one sneaks into the box while my back was turned. ( did not get a match on spamdlog..yet) This has happened a few times, made me nervousI do hope that its a sender problem. snip of once in a while completed delivery Return-Path: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] Received: (qmail 26533 invoked by uid 89); 14 Aug 2006 16:03:54 - DomainKey-Status: no signature Received: by simscan 1.2.0 ppid: 26525, pid: 26527, t: 19.2100s scanners: attach: 1.2.0 clamav: 0.88.3/m:39/d:1646 spam: 3.1.4 X-Spam-Checker-Version: SpamAssassin 3.1.4 (2006-07-25) on mail.mymail.net X-Spam-Level: X-Spam-Status: No, score=-96.3 required=3.2 tests=AWL,BAYES_00,HTML_10_20, HTML_IMAGE_ONLY_20,HTML_LINK_IMAGE_BUG,HTML_MESSAGE, HTML_SHORT_LINK_IMG_3,HTML_TEXT_AFTER_HTML,JV_Junk3r,MIME_HTML_ONLY, USER_IN_WHITELIST autolearn=no version=3.1.4 Received: from unknown (HELO mysender.com) (mysenderip) by mail.mymail.net with (EDH-RSA-DES-CBC3-SHA encrypted) SMTP; 14 Aug 2006 16:03:35 - Received-SPF: pass (mail.mymail.net: SPF record at mysender.com designates (senderip) as permitted sender) Received: from AspEmail ([(senderip)]) by mysender.com (mmysender Mail Server V1.5) with ASMTP id 048E177C for [EMAIL PROTECTED]; Mon, 14 Aug 2006 08:38:50 -0700 will watch again tomorrow when mysender.com batches to me for a good log match Like Dan mentioned on another thread, try throttling SPF back to 1 (/var/qmail/control/spfbehavior) from 3. I wasn't sure if SPF checking happens before or after simscan, but I *do* know that you won't see a log entry anywhere when there's an SPF rejection. This is a real deficiency (imho), not having SPF rejections logged. We should look into getting this fixed (even if SPF isn't the cause of this problem). -- -Eric 'shubes' -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Ayuda __ helpp-- please.
Hello Ariel, Not sure what you are asking. Do you want to disable antivirus on all but a few users? It might be easier for you to send the question in spanish, there are many spanish speakers on this list. Thanks, Erik On 8/14/06, Ariel [EMAIL PROTECTED] wrote: Hello. I need to know if it is possible to put the antivirus by whatever or usuary of vpopmail, and not of global form Gracias Hola.. necesito saber si es posible poner el antivirus por cuanta o usuarios de vpopmail, y no de forma global Gracias - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Ayuda __ helpp-- please.
Ariel wrote: Hello. I need to know if it is possible to put the antivirus by whatever or usuary of vpopmail, and not of global form Gracias Hola.. necesito saber si es posible poner el antivirus por cuanta o usuarios de vpopmail, y no de forma global Gracias I'm not sure I understand the question, but I think that http://wiki.qmailtoaster.com/index.php/Simscan might help, down where it says Lets get complicated. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Ayuda __ helpp-- please.
Exacto yo quiero habilitar antivirus en alguna cuentas , no de forma generalSaludos2006/8/14, Erik Espinoza [EMAIL PROTECTED] :Hello Ariel,Not sure what you are asking. Do you want to disable antivirus on all but a few users? It might be easier for you to send the question inspanish, there are many spanish speakers on this list.Thanks,ErikOn 8/14/06, Ariel [EMAIL PROTECTED] wrote: Hello. I need to know if it is possible to put the antivirus by whatever or usuary of vpopmail, and not of global formGracias Hola.. necesito saber si es posible poner el antivirus por cuanta o usuarios de vpopmail, y no de forma global Gracias- QmailToaster hosted by: VR Hosted http://www.vr.org-To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Ayuda __ helpp-- please.
Change /var/qmail/control/simcontrol from :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif to [EMAIL PROTECTED]:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif :spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif That will disable clamav globally, except for the e-mail addresses you have. Erik On 8/14/06, Ariel [EMAIL PROTECTED] wrote: Exacto yo quiero habilitar antivirus en alguna cuentas , no de forma general Saludos 2006/8/14, Erik Espinoza [EMAIL PROTECTED] : Hello Ariel, Not sure what you are asking. Do you want to disable antivirus on all but a few users? It might be easier for you to send the question in spanish, there are many spanish speakers on this list. Thanks, Erik On 8/14/06, Ariel [EMAIL PROTECTED] wrote: Hello. I need to know if it is possible to put the antivirus by whatever or usuary of vpopmail, and not of global form Gracias Hola.. necesito saber si es posible poner el antivirus por cuanta o usuarios de vpopmail, y no de forma global Gracias - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Install problems
This is a new install on a new server. I am currently running toaster as a mail gateway for my exchange server on a very old computer that is starting to have hardware problems. I have come to a dead stop in the install process and am not sure what to look for. I am using CentOS 4.3 standard install for QT. Everything seems to be in order and I get no errors until I go to run cnt40-svcs.sh. When trying to run cnt40-svcs.sh I get the following: [EMAIL PROTECTED] qtms-install]# sh cnt40-svcs.sh : command not founde 11: : command not founde 14: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset : command not founde 17: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/atd {start|stop|restart|condrestart|status} : command not founde 20: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/autofs {start|stop|restart|reload|condrestart|status} : command not founde 23: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: cups {start|stop|restart|condrestart|reload|status} : command not founde 26: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/cups-config-daemon {start|stop|status|restart|condrestart} : command not founde 29: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/gpm {start|stop|restart|condrestart|status} : command not founde 32: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset : command not founde 35: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset mdmonitor: unrecognized service : command not founde 38: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/netfs {start|stop|restart|reload|status} : command not founde 41: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/nfslock {start|stop|status|restart|probe|condrestart} : command not founde 44: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset : command not founde 47: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/portmap {start|stop|status|restart|reload|condrestart} : command not founde 50: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset :
RE: [qmailtoaster] Install problems
-Original Message- From: Eric Shubes [mailto:[EMAIL PROTECTED] Sent: Monday, August 14, 2006 3:05 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Install problems Joshua Hopkins wrote: This is a new install on a new server. I am currently running toaster as a mail gateway for my exchange server on a very old computer that is starting to have hardware problems. I have come to a dead stop in the install process and am not sure what to look for. I am using CentOS 4.3 standard install for QT. Everything seems to be in order and I get no errors until I go to run cnt40-svcs.sh. When trying to run cnt40-svcs.sh I get the following: [EMAIL PROTECTED] qtms-install]# sh cnt40-svcs.sh : command not founde 11: : command not founde 14: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset : command not founde 17: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/atd {start|stop|restart|condrestart|status} : command not founde 20: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/autofs {start|stop|restart|reload|condrestart|status} : command not founde 23: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: cups {start|stop|restart|condrestart|reload|status} : command not founde 26: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/cups-config-daemon {start|stop|status|restart|condrestart} : command not founde 29: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/gpm {start|stop|restart|condrestart|status} : command not founde 32: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset : command not founde 35: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset mdmonitor: unrecognized service : command not founde 38: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/netfs {start|stop|restart|reload|status} : command not founde 41: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name chkconfig [--level levels] name on|off|reset Usage: /etc/init.d/nfslock {start|stop|status|restart|probe|condrestart} : command not founde 44: chkconfig version 1.3.13.2 - Copyright (C) 1997-2000 Red Hat, Inc. This may be freely redistributed under the terms of the GNU Public License. usage: chkconfig --list [name] chkconfig --add name chkconfig --del name
Re: [qmailtoaster] Install problems
Joshua Hopkins wrote: Thanks Eric that worked for getting the services to setup correctly, but I still get errors for MySql. They are: Starting MySQL:[ OK ] mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: NO)' mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: YES)' ln: `/usr/include/com_err.h': File exists Any ideas about this part? You have a problem with mysql. Oh, I guess you knew that. :) I'm guessing that your mysql password got set with a trailing cr when you ran it before fixing the file. I'm not sure how you'd log in using a password with a trailing cr, in order to change it. I would simply try removing mysql (use rpm -e --nodeps if necessary) and re-install it. I'm guessing that might fix it. Then just rerun the script. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [qmailtoaster] spam filtering proxy, pass-through
Finally, I've got my qmailtoaster box set up as the mail server for company2.com I can send and receive, all is well. I've also got the same qmailtoaster box set up to take inbound mail that is destined for company1.com and pass it along to the exchange server. It has also been tested... Mail is sent from [EMAIL PROTECTED] to [EMAIL PROTECTED] and things seem to work fine. Now... What do I need to do to make sure that the qmailtoaster box takes the incoming mail that is destined for company1.com and washes it free of spam and viruses? Once the configuration is completed... are there tests I can run to verify that it is happening? Ron Jones -Original Message- From: Erik Espinoza [mailto:[EMAIL PROTECTED] Sent: Friday, August 11, 2006 11:20 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] spam filtering proxy Yes! Step 1, add an smtproute domain.com:exchange.domain.com, add domain to rcpthosts Step 2, point dns to qmailtoaster Step 3, create /var/qmail/control/doublebouncehost and doublebounceto and fill this out Done Erik On 8/11/06, Ron Jones [EMAIL PROTECTED] wrote: Sorry, what I should have said (more clearly) was The exchange box is separate unto itself (SBS 2003), the qmailtoaster box, though separate, is on the same LAN. Currently, I have mail.company1.com hosted on the exchange box, and mail.company2.com hosted on the qmailtoaster box. What I'd like to do is use the qmailtoaster box as a spam-filtering, virus killing proxy for company1, and continue to host the mail for company 2. Is this possible? Ron Jones P 678.921.0318 C 770.378.3647 www.tftgi.com -Original Message- From: Erik Espinoza [mailto:[EMAIL PROTECTED] Sent: Friday, August 11, 2006 11:05 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] spam filtering proxy Not without virtualization. QmailToaster doesn't run on XP Server. Erik On 8/11/06, Ron Jones [EMAIL PROTECTED] wrote: Is it possible to set up QmailToaster as a spam-filtering proxy for one domain (which uses an exchange server), and on the same box, host the mail for a completely second domain? Thanks Ron Jones The Fulcrum Technology Group, Inc 585 Creek Landing Lane Alpharetta, GA 30005 P 678.921.0318 F 678.921.0403 C 770.378.3647 www.tftgi.com - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]