Re: [qmailtoaster] qmailtoaster installation large installation
I have 1,000 + On Wednesday, 14 October, 2015 08:46 AM, Rajesh M wrote: hello all, does anybody have a qmailtoaster installation with over 8000 users in single installation. we are looking for some basic guidance on this. rajesh - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Concerns for Updates, Viability, Future of Qmailtoaster
Hi Guys, I am concerned for the future of Qmailtoaster, updates, viability. Free is good at the start, but when your software is run by corporations, these corporations need constant updates and tech support. What I mean is that it is 2015, and the default install is still just for CentOS 5.x But CentOS 5.x is usually no longer in the list of VPS-Xen installs. CentOS 6.x installs I see here discussed and on the Wiki does not seem stable. QTP-Menu does not really seem to work fully to update everything. And updates are few and far between. How about you guys start charging for an annual fee or something? Just to assure that qmailtoaster gets updated all the time: dovecot, spamassassin, clamav... the rest of the stuff. Then you should have flawless installs on CentOS 6 and CentOs 7. Just my 2 cents. - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Dovecot and Squirrelmail IMAP Quota Usage Display - SOLVED
Hi Guys, For those who have not been able to display Quotas / Disk Usage on Squirrelmail or Roundcube or Thunderbird Quota Plugin... I would like to share the easy solution I just found about how to display quota usage in: - Qmail Toaster - CentOs 5.x - Courier Replaced by Dovecot 2.0.17 The solution I copied from looking at the development Qmail Toaster for CentOS 6. This is what I did for 2 installations of QMT on CentOS 5.x with Dovecot 2.0.17: In /etc/dovecot/toaster.conf Add these lines: start - # added to make quotas work! mail_plugins = $mail_plugins quota protocol imap { imap_client_workarounds = delay-newmail mail_plugins = $mail_plugins imap_quota } plugin { quota = maildir:ignore=Trash quota_rule = ?:storage=0 } -- end --- Restart dovecot with: service dovecot restart And that is it, the quotas via imap will now display in your Squirrelmail (with the check quota plugin) and Roundcube. For Thunderbird you can install a quota plugin. Hope this helps someone. Best wishes, Edwin - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Roundcube Survey
My users use both roundcube and squirrelmail. What my users demand is a company wide address book. Best wishes, Edwin On Thursday, 29 May, 2014 10:07 PM, Eric Broch wrote: On 5/27/2014 8:28 PM, Eric Shubert wrote: For those using Roundcube, please be so gracious as to answer a couple questions. Do you use it with nginx? (I expect mostly no answers) If not, have you used nginx for anything else? Thank you for your participation. I'm contemplating adding Roundcube to the 'stock' QMT. It's been long overdue. I like the the roundcube interface much better than squirrelmail's and am glad to see it finely out of beta. It was there for so long I just stopped checking on it. Anyway, IMHO, I think if compatibility is not in question it is a good direction. - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] QMT on COS6 Officially Released!
When will QMT6 - ISO come out? - Edwin On Wednesday, 23 April, 2014 02:03 AM, Philip Nix Guru wrote: Evening What's the best method nowadays to do a fresh install ? the old install shell scripts or something is added now in qtp ? Thx Eric for the great work, I ve been running qmaitoaster servers for several years now since the early days I d say :) -P -Original Message- From: Eric Shubert Sent: Monday, April 21, 2014 4:58 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] QMT on COS6 Officially Released! The packages for QMT have been promoted to the /current/ branch in the repo. If you installed packages from the /testing/ branch, you do not need to update from the /current/ branch. You may want to disable the /testing/ repo in the appropriate /etc/yum.repos.d/*.repo files if you enabled them. Then again, you might want to keep them enabled. There are already a few updates in /testing/ related to the upcoming changes for logging, which are going to be significant. We will be implementing an ELK (ElasticSearch, Logstash, Kibana) stack for log analysis. This will bring all of the logs under one umbrella and provide some very neat analysis capabilities. If you have any problems with anything, as always, bring them up here. Making changes to packages is now highly automated, and I expect that we'll be seeing much more frequent releases of packages as things are changed and fixed. Documentation is still a bit behind. If anyone would like to get some experience with github's wiki, let me know and we can apply some teamwork on getting that going. What we do with that presently has wide open possibilities. Thanks to all the testers and trail blazers who helped make this release possible. You know who you are, and your help is greatly appreciated.
Re: [qmailtoaster] My Email clients are hanging and disconnected frequently
Aside from converting to dovecot for IMAP, I also use JFS instead of EXT3. I do not think EXT3 is up to the task anymore. Are you on any RAID? Best wishes, Edwin On Thursday, 29 August, 2013 12:53 PM, cj yother wrote: We need an autoresponder for this question...convert to Dovecot. Instructions on the wiki. On 08/28/2013 09:51 PM, ChandranManikandan wrote: Hi All, I am using Qmailtoaster with courier imap and my total mailboxes is around 100. Some email mailbox is very large from 10 to 15 GB. At a time all users accessing emails from outlook or thunderbird or squirrelmail email client. My server is hosting in our Main office. Problem is if main office 20 users accessing emails through outlook still they are facing hang and disconnected frequently. Same issue face in our branch office also. When they switch from inbox to any other folder hanging and not able to see the mails. Am planning to migrate from courier to dovecot. If i migrate my above query will solved or still do i face this issue. or do i need to change settings in courier imapd config file. I want to solve this issue permanently. My server config is 500GB and 10 GB RAM and our main office internet speed is upload and download 30 MB Fibre optic broadband. Centos 5.7. 32 Bit. Kindly help me any one, -- Thanks Best Regards, Manikandan.C System Admin --
Re: [qmailtoaster] Re: backup and restore qmail server !!!
On Monday, 01 July, 2013 11:29 AM, PakOgah wrote: On 06/29/13 8:17, Edwin Casimero wrote: ...snip... I would like to add that you also mysqldump or backup your entire /var/lib/mysql directory. Best wishes, Edwin for mysql database backup/restore, I suggest you do incremental daily and full backup at weekend you can use this free script, (choose community version) http://www.zmanda.com/backup-mysql.html Why do you need incremental daily backup for mysql when the database is so very small? - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: backup and restore qmail server !!!
On Thursday, 27 June, 2013 12:34 AM, Eric Shubert wrote: Welcome to the community, Vivik. On 06/26/2013 04:12 AM, Linux wrote: Dear All, I really in trouble, I am newer for qmail toaster. I need to backup and restore of qmail server, in the ways, 1. backup and restore all email IDs qtp-backup and qtp-restore are scripts contained in the qmailtoaster-plus package (http://qtp.qmailtoaster.com). These are typically used for migrations. 2. backup and restore particular ID. We don't presently have anything with this capability. The above scripts could be hacked up to do this. I had a look at doing this at one point, but it wasn't a very high priority. So please friends help me out. For backups, I rsync the /home/vpopmail/domains folder. That seems to be best for the email. You can strip that portion out of the qtp-backup script, and that would backup everything else very quickly. Regards, Vivek Patil system admin Tel : +91-20-2422-786-1 / 2 / 3 / 4 - Extn No - 205 I would like to add that you also mysqldump or backup your entire /var/lib/mysql directory. Best wishes, Edwin - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Courier IMAP Access very slow
Convert your qmailtoaster from Courier IMAP to Dovecot IMAP. Dovecot is fast! Best wishes, Edwin On Tuesday, 11 June, 2013 03:56 PM, ChandranManikandan wrote: Hi All, Am facing below issue. We have 70 Email accounts using qmailtoaster with courier imap. Probably will access always 60 IMAP accounts everyday. All user get very slow access some time. We are using outlook 2007 and outlook 2010 mail client as well send and receive it's run very slow. We are facing this issue oftenly hanged outlook and unable to access fast in imap server. We have two office and each office have 20 employee access imap and mobile users also. Can you please give me the solution to fix this issue. My courier conf below. ADDRESS=127.0.0.1 PORT=143 MAXDAEMONS=200 MAXPERIP=100 IMAP_IDLE_TIMEOUT=1800 -- */Thanks Best Regards, Manikandan.C /*
Re: [qmailtoaster] Re: qtp-install-spamdyke v0.3.4 - please fix problem(s), then try again.
On Thursday, 07 March, 2013 12:32 AM, Eric Shubert wrote: On 03/05/2013 05:08 PM, Edwin Casimero wrote: Bought brand new QTP x86-64 ISO install and using qtp-menu to install spamdyke. I get: qtp-install-spamdyke v0.3.4 - spamdyke configuration problem(s) detected. qtp-install-spamdyke v0.3.4 - please fix problem(s), then try again. Help please? Here are the details: -- [root@vpsemail ~]# qtp-whatami qtp-whatami v0.3.8 Wed Mar 6 08:07:10 PHT 2013 REAL_DIST=CentOS DISTRO=CentOS OSVER=5.9 QTARCH=x86_64 QTKERN=2.6.18-348.1.1.el5 BUILD_DIST=cnt5064 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested [root@vpsemail ~]# qtp-install-spamdyke qtp-install-spamdyke v0.3.4 - getting latest spamdyke version ... qtp-install-spamdyke v0.3.4 - downloading spamdyke-4.3.1 ... qtp-install-spamdyke v0.3.4 - compiling spamdyke-4.3.1 ... checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for stdint.h... (cached) yes checking sys/inttypes.h usability... no checking sys/inttypes.h presence... no checking for sys/inttypes.h... no checking for sys/types.h... (cached) yes checking for stdint.h... (cached) yes checking for sys/inttypes.h... (cached) no checking whether time.h and sys/time.h may both be included... yes checking for int16_t... yes checking for int32_t... yes checking for int64_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for struct dirent.d_type... yes checking whether DT_WHT is declared... yes checking whether S_IFWHT is declared... no checking whether INADDR_LOOPBACK is declared... yes checking whether to include debugging symbols (for gdb)... no checking for strip... strip spamdyke checking whether to include excessive debugging output... no checking whether to include some debugging output... yes checking whether to include configuration tests... yes checking if openssl/ssl.h will include without additional include directories... yes checking for library containing RSA_sign... -lssl checking for library containing SSL_library_init... none required checking for OpenSSL libraries (for TLS support)... yes checking for library containing inet_aton... none required checking for library containing bind... none required checking for library containing inet_ntoa... none required checking for library containing getopt_long... none required checking whether anonymous inner functions are supported by default... yes checking whether struct option is defined in getopt.h... yes checking whether GCC diagnostic pragma directives are supported... no checking whether pid_t is an unsigned int or an unsigned long... unsigned int checking whether uid_t is an unsigned int or an unsigned long... unsigned int checking whether gid_t is an unsigned int or an unsigned long... unsigned int checking whether time_t is an int or a long... long checking whether int64_ts are supported in a test program... yes checking whether printf()/scanf() uses %ld for 64-bit integers... yes checking whether __func__ is available... yes checking whether socklen_t is available... yes configure: creating ./config.status config.status: creating Makefile config.status: creating config.h gcc -Wall -O2 -funsigned-char -c spamdyke.c gcc -E -Wall -O2 -funsigned-char configuration.c | gcc -Wall -O2 -funsigned-char -x c -c -o configuration.o - gcc -Wall -O2 -funsigned-char -c dns.c gcc -Wall -O2 -funsigned-char -c environment.c gcc -Wall -O2 -funsigned-char -c usage.c gcc -Wall -O2 -funsigned-char -c search_fs.c gcc -Wall -O2 -funsigned-char -c exec.c gcc -Wall -O2 -funsigned-char -c base64.c gcc -Wall -O2 -funsigned-char -c tls.c gcc -Wall -O2 -funsigned-char -c log.c gcc -Wall -O2 -funsigned-char -c config_test.c gcc -Wall -O2 -funsigned-char -c md5.c gcc -Wall -O2 -funsigned-char -c filter.c gcc -Wall -O2 -funsigned-char -o spamdyke spamdyke.o configuration.o dns.o environment.o usage.o search_fs.o exec.o base64.o tls.o log.o config_test.o md5.o filter.o -lssl -lssl strip spamdyke qtp-install-spamdyke v0.3.4 - installing spamdyke-4.3.1 ... qtp-install-spamdyke
[qmailtoaster] squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found
Hi Guys, I just bought QMT x86_64 iso and it is a great time saver. I'm updating the qmt packages and squirrelmail src.rpm is missing: squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found Not Found The requested URL /squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.2.3 (CentOS) Server at mirrorb.qmailtoaster.com Port 80 Maybe the mirror people can fix this missing file. Best wishes, Edwin
Re: [qmailtoaster] squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found
Choice #1 - Updating via qtp-newmodel ... results in the squirrelmail src rpm not found. Choice #2 - Downloading manually the file through the qmailtoaster.com website link in the list of files not found. Default install of QMT x86-84 is CentOS 5.3 When I updated it just now to the latest version it is CentOS 5.9 Best wishes, Edwin On Wednesday, 06 March, 2013 01:40 AM, Helmut Fritz wrote: Interesting, the current version is 1.4.22-1.4.0. not sure why it would try to find 1.4.20-1.3.17. How are you trying to update? Through the update script? *From:*Edwin Casimero [mailto:ecasim...@gmail.com] *Sent:* Tuesday, March 05, 2013 9:19 AM *To:* qmailtoaster-list@qmailtoaster.com *Subject:* [qmailtoaster] squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found Hi Guys, I just bought QMT x86_64 iso and it is a great time saver. I'm updating the qmt packages and squirrelmail src.rpm is missing: squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found Not Found The requested URL /squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.2.3 (CentOS) Server at mirrorb.qmailtoaster.com Port 80 Maybe the mirror people can fix this missing file. Best wishes, Edwin
Re: [qmailtoaster] squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found
Yes, all fixed now. I now get Squirrelmail 1.4.22 Thank you. Best wishes, Edwin On Wednesday, 06 March, 2013 02:07 AM, Helmut Fritz wrote: Should be fixed now using qtp-newmodel per Eric's note. *From:*Edwin Casimero [mailto:ecasim...@gmail.com] *Sent:* Tuesday, March 05, 2013 9:57 AM *To:* qmailtoaster-list@qmailtoaster.com *Subject:* Re: [qmailtoaster] squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found Choice #1 - Updating via qtp-newmodel ... results in the squirrelmail src rpm not found. Choice #2 - Downloading manually the file through the qmailtoaster.com website link in the list of files not found. Default install of QMT x86-84 is CentOS 5.3 When I updated it just now to the latest version it is CentOS 5.9 Best wishes, Edwin On Wednesday, 06 March, 2013 01:40 AM, Helmut Fritz wrote: Interesting, the current version is 1.4.22-1.4.0. not sure why it would try to find 1.4.20-1.3.17. How are you trying to update? Through the update script? *From:*Edwin Casimero [mailto:ecasim...@gmail.com] *Sent:* Tuesday, March 05, 2013 9:19 AM *To:* qmailtoaster-list@qmailtoaster.com mailto:qmailtoaster-list@qmailtoaster.com *Subject:* [qmailtoaster] squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found Hi Guys, I just bought QMT x86_64 iso and it is a great time saver. I'm updating the qmt packages and squirrelmail src.rpm is missing: squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found Not Found The requested URL /squirrelmail-toaster-1.4.20-1.3.17.src.rpm was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.2.3 (CentOS) Server at mirrorb.qmailtoaster.com Port 80 Maybe the mirror people can fix this missing file. Best wishes, Edwin
Re: [qmailtoaster] Squirrelmail alternatives? Looking for recs
Roundcube sucks on Ipad. Looks good on desktops and laptops. I use both. On Friday, 07 December, 2012 01:50 AM, Sebastian Grewe wrote: PS: when it comes to auto responses and password changes I have not been using Roundcube though. I would love to run it in Roundcube if that would be possible - maybe others have experience with that already? Cheers, Sebastian On 06.12.2012, at 18:44, Sebastian Grewe sebast...@grewe.ca wrote: Hey Diana, I am using RoundCube myself and I am very happy with it. It is exactly what you said: A Webmailer without all the bells and whistles others offer. Installation is easy and straight forward. You can try it out on any LAMP host and point it towards your IMAP/SMTP host to try it out. Or I make a quick account for you to see the UI ;-) Sidenote: I have written an Opscode Chef cookbook for it too. Cheers, Sebastian On 06.12.2012, at 18:24, Diana Calder dcal...@essexcountylibrary.ca wrote: Anyone using something other than Squirrelmail for webmail with Qmailtoaster? I'm working my way through researching the options listed in the Wiki but I'd like to get some feedback from someone who's actually using one of the alternative webmail packages. So far, it looks like atmail is gone (the free community version, at least), and AfterLogic lite, eGroupware, Horde, and RoundCube all look like they're worth taking a deeper look at. I'd prefer something that looks a little less dated than Squirrelmail and that has a good mobile interface. Our Intranet is a hosted Noodle instance, so I'm not really interested in extra bells and whistles like calendars and such - just good solid email features like a decent address book (though a nice shared one in addition to personal ones would be nice), the ability to set a vacation response, basic filtering, and allowing individual users to change their password. eGroupware is probably overkill for our needs and even Horde may be a little over the top - but they're also the two nicest looking. I'll be continuing to research but some helpful comments from the Qmailtoaster community would be greatly appreciated. Hoping for some good recommendations, Diana -- Best regards, Diana mailto:dcal...@essexcountylibrary.ca - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: New build
On Thursday, 01 November, 2012 07:23 AM, Eric Shubert wrote: The djbdns source package has been removed from the stock package list. It never really was fully supported, and isn't really necessary. If anyone is using it and prefers to keep doing so, there's nothing really wrong with that. The simplest and probably most efficient way to have a resolver on your qmt host (which we do recommend doing) is: # yum install pdns-resolver PowerDNS is modern, robust, actively maintained and widely used DNS software. It is efficient and reliable. Please accept our apologies that all of the documentation and scripts aren't yet up to date as we move forward. Interesting. I will try powerdns. - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Dovecot and Squirrelmail Quota Check or Quota Usage Display
Hi Everyone, I upgraded from courier imap to dovecot imap. The downside is that the built in quota usage display no longer works. I tried installing the squirrelmail plugin quota check and it does not work as well. So now I'm stuck with users having to go to qmailadmin to check their quota / MB consumption. What am I missing? Which squirrelmail plugin works to show quotas / disk space consumption? Thanks in Advance. Edwin - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Dovecot and Squirrelmail Quota Check or Quota Usage Display
On Monday, 08 October, 2012 11:10 PM, Eric Shubert wrote: On 10/08/2012 07:39 AM, Aleksander Podsiadły wrote: Dnia 2012-10-08, pon o godzinie 21:41 +0800, Edwin Casimero pisze: The downside is that the built in quota usage display no longer works. Check this config patch: 8-- dovecot_config-1.2.16.patch --- dovecot.conf2011-02-02 19:24:52.0 +0100 +++ dovecot.conf.org2011-01-25 17:34:52.0 +0100 @@ -238,17 +238,15 @@ # explicitly, ie. mail_location does nothing unless you have a namespace # without a location setting. Default namespace is simply done by having a # namespace with empty prefix. -namespace private { +#namespace private { # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. # The default however depends on the underlying mail storage format. #separator = - separator = . # Prefix required to access this namespace. This needs to be different for # all namespaces. For example Public/. #prefix = - prefix = INBOX. # Physical location of the mailbox. This is in same format as # mail_location, which is also the default for it. @@ -257,7 +255,6 @@ # There can be only one INBOX, and this setting defines which namespace # has it. #inbox = no - inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension. You'll most likely also want to set list=no. This is mostly @@ -274,7 +271,7 @@ # Namespace handles its own subscriptions. If set to no, the parent # namespace handles them (empty prefix should always have this as yes) #subscriptions = yes -} +#} # Example shared namespace configuration #namespace shared { @@ -301,8 +298,6 @@ # or names. doc/wiki/UserIds.txt #mail_uid = #mail_gid = -mail_uid = 89 -mail_gid = 89 # Group to enable temporarily for privileged operations. Currently this is # used only with INBOX when either its initial creation or dotlocking fails. @@ -382,8 +377,6 @@ # be done even if first_valid_uid is set to 0. #first_valid_uid = 500 #last_valid_uid = 0 -first_valid_uid = 89 -last_valid_uid = 89 # Valid GID range for users, defaults to non-root/wheel. Users having # non-valid GID as primary group ID aren't allowed to log in. If user @@ -391,8 +384,6 @@ # not set. #first_valid_gid = 1 #last_valid_gid = 0 -first_valid_gid = 89 -last_valid_gid = 89 # Maximum number of running mail processes. When this limit is reached, # new users aren't allowed to log in. @@ -572,8 +563,8 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. - mail_plugins = quota imap_quota trash - mail_plugin_dir = /usr/lib64/dovecot/imap + #mail_plugins = + #mail_plugin_dir = /usr/lib/dovecot/imap # IMAP logout format string: # %i - total number of bytes read from client @@ -690,8 +681,8 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. - mail_plugins = quota - mail_plugin_dir = /usr/lib64/dovecot/pop3 + #mail_plugins = + #mail_plugin_dir = /usr/lib/dovecot/pop3 # Workarounds for various client bugs: # outlook-no-nuls: @@ -917,7 +908,7 @@ # database (passwd usually), you can use static userdb. # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM # authentication to actually work. doc/wiki/PasswordDatabase.PAM.txt - #passdb pam { + passdb pam { # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=n] # [cache_key=key] [service name] # @@ -950,7 +941,7 @@ # args = session=yes %Ls # args = cache_key=%u dovecot #args = dovecot - #} + } # System users (NSS, /etc/passwd, or similiar) # In many systems nowadays this uses Name Service Switch, which is @@ -1004,13 +995,12 @@ #} # vpopmail authentication doc/wiki/AuthDatabase.VPopMail.txt - passdb vpopmail { + #passdb vpopmail { # [cache_key=key] - See cache_key in PAM for explanation. # [quota_template=template] - %q expands to Maildir++ quota # (eg. quota_template=quota_rule=*:backend=%q) #args = -args = webmail=127.0.0.1 - } + #} # # User database specifies where mails are located and what user/group IDs @@ -1083,9 +1073,8 @@ #} # vpopmail doc/wiki/AuthDatabase.VPopMail.txt - userdb vpopmail { -#args = quota_template=quota_rule=*:backend=%q - } + #userdb vpopmail { + #} # User to use for the process. This user needs access to only user and # password databases, nothing else. Only shadow and pam authentication @@ -1101,7 +1090,7 @@ #chroot = # Number of authentication processes to create - count = 1 + #count = 1 # Require a valid SSL client certificate or the authentication fails. #ssl_require_client_cert
[qmailtoaster] How / When Will Email Quotas go beyond 2048 mb ?
Hello guys, It is almost 2012 and my qmailtoaster installs on Centos 5 32-bit are limited to 2048 mb in their individual email quotas. Gmail issues almost 8 GB quotas. I'd like to set new quotas in GBs such as 10 GB or 25 GB. How do we go about this? Is there something that needs to be fixed in Qmailtoaster? Should I use a 64bit OS? Is this something that will be standard in Qmailtoaster Version 2.0 Is this something we can fund Jake to implement? Best wishes, Edwin
Re: [qmailtoaster] Re: Corrupt JPG, DOC and XLS files after Converting to DOVECOT
I have problems with $imap_auth_mech = 'cram-md5'; so I replaced it with login, which works... cram-md5 was giving me password problems... some passwords accepted, some not. What I did was to completely replace squirrelmail with a NEW install of squirrelmail, the latest 1.4.22 version. And I installed it under /webmail2 It works, and my customer gets to work again, I get to work again. Maybe the stock squirrelmail in qmailtoaster packages needs to be updated to accommodate dovecot. Hope my little bit helped. Thanks and kudos to the qmailtoaster team! Edwin On Mon, Aug 15, 2011 at 10:37 AM, Eric Shubert e...@shubes.net wrote: There are a few squirrelmail config option changes that are needed when using dovecot. Here's what I have: ?php # Local configuration for Qmail Toaster # configure to suit your requirements # these are in toaster config, # changed/removed for stock dovecot (w/out courier compat config) # $imap_server_type = 'courier'; # $optional_delimiter = '.'; # $default_folder_prefix = 'INBOX.'; # $delete_folder = true; # $show_contain_subfolders_**option = false; # these should be added to the toaster config (imho) $org_name= QmailToaster; # $org_logo= SM_PATH . 'images/sm_logo.png'; # $org_logo_width = '308'; # $org_logo_height = '111'; # $org_title = SquirrelMail $version; $provider_uri = 'http://www.qmailtoaster.org/'**; $provider_name = 'QmailToaster'; # these were added so SM can be installed/run on separate host #$smtpServerAddress = 'tacs-submission'; $smtpServerAddress = 'tacs-mail'; $smtpPort = 587; $smtp_auth_mech = 'login'; # these were added/changed for dovecot imap from a separate host $imapServerAddress = 'tacs-imap'; $imap_server_type = 'dovecot'; # squirrelmail doesn't support starttls until v5, # so we'll use cram-md5 til then #$use_imap_tls = true; $imap_auth_mech = 'cram-md5'; # these are what's left from stock QMT configuration $useSendmail = false; $optional_delimiter = 'detect'; $default_folder_prefix= ''; $show_prefix_option = false; $force_username_lowercase = true; $hide_sm_attributions = true; $plugins[] = 'calendar'; $plugins[] = 'notes'; $plugins[] = 'filters'; $plugins[] = 'quota_usage'; $plugins[] = 'unsafe_image_rules'; $plugins[] = 'qmailadmin_login'; ? On 08/10/2011 12:28 AM, Edwin Casimero wrote: I am also able to open files fine with a REMOTE SQUIRRELMAIL with config setup for DOVECOT imap. So it seems it is a configuration or version problem in squirrelmail install of qmailtoaster. Edwin On Wednesday, 10 August, 2011 11:19 AM, Edwin Casimero wrote: I seem to observe that the problem is with the SQUIRRELMAIL client. I can open the files fine using IMAP on thunderbird. Further investigating. Edwin On Wednesday, 10 August, 2011 11:10 AM, Eli Edwin Casimero wrote: Guys, I have a big problem. CentOS 5.5 Qmailtoaster Converted recently to DOVECOT Everything seems running fine and fast, except for file attachments! Now all files of JPG, DOC and XLS I send and receive become corrupt! PDF files are okay. HELP! What should I investigate? Edwin --**--** - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --**--** - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscribe@**qmailtoaster.comqmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-help@** qmailtoaster.com qmailtoaster-list-h...@qmailtoaster.com --**--** - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' --**--** - Qmailtoaster is sponsored by Vickers Consulting Group ( www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --**--** - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscribe@** qmailtoaster.com qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail
Re: [qmailtoaster] Corrupt JPG, DOC and XLS files after Converting to DOVECOT
I am also able to open files fine with a REMOTE SQUIRRELMAIL with config setup for DOVECOT imap. So it seems it is a configuration or version problem in squirrelmail install of qmailtoaster. Edwin On Wednesday, 10 August, 2011 11:19 AM, Edwin Casimero wrote: I seem to observe that the problem is with the SQUIRRELMAIL client. I can open the files fine using IMAP on thunderbird. Further investigating. Edwin On Wednesday, 10 August, 2011 11:10 AM, Eli Edwin Casimero wrote: Guys, I have a big problem. CentOS 5.5 Qmailtoaster Converted recently to DOVECOT Everything seems running fine and fast, except for file attachments! Now all files of JPG, DOC and XLS I send and receive become corrupt! PDF files are okay. HELP! What should I investigate? Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Corrupt JPG, DOC and XLS files after Converting to DOVECOT
Guys, I have a big problem. CentOS 5.5 Qmailtoaster Converted recently to DOVECOT Everything seems running fine and fast, except for file attachments! Now all files of JPG, DOC and XLS I send and receive become corrupt! PDF files are okay. HELP! What should I investigate? Edwin
Re: [qmailtoaster] Corrupt JPG, DOC and XLS files after Converting to DOVECOT
I seem to observe that the problem is with the SQUIRRELMAIL client. I can open the files fine using IMAP on thunderbird. Further investigating. Edwin On Wednesday, 10 August, 2011 11:10 AM, Eli Edwin Casimero wrote: Guys, I have a big problem. CentOS 5.5 Qmailtoaster Converted recently to DOVECOT Everything seems running fine and fast, except for file attachments! Now all files of JPG, DOC and XLS I send and receive become corrupt! PDF files are okay. HELP! What should I investigate? Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Wiki Page for Google as Backup MX
http://wiki.qmailtoaster.com/index.php/How_to_Setup_Google_As_Backup_Server Has anyone tested if Google as Backup MX is reliable? I've got 400 email boxes in my toaster box. Free google apps is 50 email boxes. Will this work for 400 email boxes? Will fetchmail know which mailbox to deliver the email to? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Wiki Page for Google as Backup MX
http://wiki.qmailtoaster.com/index.php/How_to_Setup_Google_As_Backup_Server Has anyone tested if Google as Backup MX is reliable? I've got 400 email boxes in my toaster box. Free google apps is 50 email boxes. Will this work for 400 email boxes? Will fetchmail know which mailbox to deliver the email to? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] SMTP attack
Ban the bad guy IP at the firewall level. Best wishes, Edwin On 03/02/2011 08:25 AM, Sergio M wrote: Hi there list, i have been under heavy traffic since sunday, and its been using all my inbound connections. I have a QMT updated box, running the latest spamdyke: # qtp-whatami /qtp-whatami v0.3.7 Tue Mar 1 21:14:03 ART 2011 DISTRO=CentOS OSVER=5.5 QTARCH=x86_64 QTKERN=2.6.18-194.32.1.el5 BUILD_DIST=cnt5064 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested/ Even though spamdyke does not let the spammers relay the mail, i still get all the connections used, making it very hard for authenticated users to send mail. For now I stopped smtpd, but i wanna see if you guys have some other thoughts to solve this. If I see the maillog, i see LOTS of entries like these: /Feb 27 14:57:38 mail spamdyke[31069]: FILTER_RBL_MATCH ip: 201.0.152.106 rbl: zen.spamhaus.org Feb 27 14:57:38 mail vpopmail[31072]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:190.158.93.231 Feb 27 14:57:38 mail spamdyke[31071]: FILTER_RBL_MATCH ip: 201.43.79.201 rbl: zen.spamhaus.org Feb 27 14:57:38 mail spamdyke[31075]: FILTER_BLACKLIST_IP ip: 187.106.1.158 file: /var/qmail/control/ip-blacklist(75) Feb 27 14:57:38 mail vpopmail[31077]: vchkpw-smtp: password fail (pass: 'jdorm253') jorgerodrig...@domain.com:201.250.40.202 Feb 27 14:57:38 mail spamdyke[31080]: FILTER_RBL_MATCH ip: 201.81.74.149 rbl: zen.spamhaus.org Feb 27 14:57:39 mail vpopmail[31082]: vchkpw-smtp: password fail (pass: 'edos1kd9') eduardos...@domain.com:201.82.74.70Feb 27 14:57:39 mail spamdyke[31084]: FILTER_RDNS_RESOLVE ip: 189.106.88.244 rdns: 189106088244.user.veloxzone.com.br Feb 27 14:57:40 mail vpopmail[31086]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:201.43.79.201Feb 27 14:57:40 mail vpopmail[31088]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:189.106.88.244 Feb 27 14:57:41 mail spamdyke[31090]: FILTER_RDNS_RESOLVE ip: 200.105.97.83 rdns: rev.97.83-telecablecr.com Feb 27 14:57:42 mail vpopmail[31092]: vchkpw-smtp: password fail (pass: 'jdorm253') jorgerodrig...@domain.com:187.106.1.158Feb 27 14:57:42 mail vpopmail[31095]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:201.0.152.106 Feb 27 14:57:42 mail spamdyke[31094]: FILTER_RBL_MATCH ip: 93.39.224.8 rbl: zen.spamhaus.org Feb 27 14:57:42 mail vpopmail[31098]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:200.45.73.226Feb 27 14:57:43 mail spamdyke[31100]: FILTER_RBL_MATCH ip: 189.54.236.113 rbl: zen.spamhaus.org Feb 27 14:57:43 mail spamdyke[31102]: FILTER_BLACKLIST_IP ip: 187.119.172.80 file: /var/qmail/control/ip-blacklist(75) Feb 27 14:57:43 mail vpopmail[31105]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:189.114.176.151 Feb 27 14:57:44 mail vpopmail[31107]: vchkpw-smtp: password fail (pass: 'luckymi') lucianos...@domain.com:190.158.93.231 Feb 27 14:57:44 mail vpopmail[31110]: vchkpw-smtp: password fail (pass: 'edos1kd9') eduardos...@domain.com:93.39.224.8/ So i guess some botnet is trying to relay mail guessing a specific domain user's passwords. Most of the attempts are blocked by RBL checking, but that still create a connection. Looking at # cat /var/log/qmail/smtp/current | tai64nlocal /2011-03-01 20:54:01.905947500 tcpserver: pid 4879 from 189.6.164.77 2011-03-01 20:54:01.906030500 tcpserver: ok 4879 mail.myhost.com.ar:11.22.33.44:25 :189.6.164.77::37629 2011-03-01 20:54:02.157286500 tcpserver: end 4797 status 0 2011-03-01 20:54:02.157289500 tcpserver: status: 24/25 2011-03-01 20:54:02.157290500 tcpserver: status: 25/25 2011-03-01 20:54:02.157443500 tcpserver: pid 4881 from 190.172.129.24 2011-03-01 20:54:02.157530500 tcpserver: ok 4881 mail.myhost.com.ar:11.22.33.44:25 :190.172.129.24::14782 2011-03-01 20:54:05.433208500 tcpserver: end 4857 status 0 2011-03-01 20:54:05.433211500 tcpserver: status: 24/25 2011-03-01 20:54:05.433212500 tcpserver: status: 25/25 2011-03-01 20:54:05.433213500 tcpserver: pid 4903 from 189.78.49.139 2011-03-01 20:54:05.433215500 tcpserver: ok 4903 mail.myhost.com.ar:11.22.33.44:25 :189.78.49.139::36877 2011-03-01 20:54:06.075161500 tcpserver: end 4800 status 0 2011-03-01 20:54:06.075164500 tcpserver: status: 24/25 2011-03-01 20:54:06.075165500
[qmailtoaster] How can I remove spamhaus.org as RBL in addition to /var/qmail/control ?
Is spamhaus hard coded into qmailtoaster? Cannot remove spamhaus.org as RBL. How can I remove spamhaus.org as RBL? At first it was indicated in /var/qmail/control/blacklists I receive the standard rejection: User and password not set, continuing without authentication. 64.120.146.173 does not like recipient. Remote host said: 554 Refused. Your IP address is listed in the RBL at zen.spamhaus.org Giving up on 64.120.146.173. I removed spamhause from /var/qmail/control/blacklists Then restarted qmailtoaster. I try emailing again and this time I get: User and password not set, continuing without authentication. 64.120.146.173 does not like recipient. Remote host said: 554 http://www.spamhaus.org/SBL/sbl.lasso?query=SBL96369 Giving up on 64.120.146.173. It's as if spamhaus.org is hard wired into toaster. Where else can I remove spamhaus as rbl ? Thanks in advance, Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] How can I remove spamhaus.org as RBL in addition to /var/qmail/control ?
How to remove it from spamdyke? On Wed, Oct 6, 2010 at 2:41 PM, Jake Vickers j...@qmailtoaster.com wrote: On 10/06/2010 02:34 AM, Edwin Casimero wrote: Is spamhaus hard coded into qmailtoaster? Cannot remove spamhaus.org as RBL. How can I remove spamhaus.org as RBL? At first it was indicated in /var/qmail/control/blacklists I receive the standard rejection: User and password not set, continuing without authentication. 64.120.146.173 does not like recipient. Remote host said: 554 Refused. Your IP address is listed in the RBL at zen.spamhaus.org Giving up on 64.120.146.173. I removed spamhause from /var/qmail/control/blacklists Then restarted qmailtoaster. I try emailing again and this time I get: User and password not set, continuing without authentication. 64.120.146.173 does not like recipient. Remote host said: 554 http://www.spamhaus.org/SBL/sbl.lasso?query=SBL96369 Giving up on 64.120.146.173. It's as if spamhaus.org is hard wired into toaster. Where else can I remove spamhaus as rbl ? It is not hardcoded in. It is defined in the /var/qmail/control/blacklists file. If you're using Spamdyke, you may need to remove it from there as well. If you remove it from the blacklists file, stop qmail (qmailctl stop) and then check to ensure the SMTP processes complete and exit nicely (qmailctl stat). Once everything is down, start the service again (qmailctl start). - Qmailtoaster is sponsored by Vickers Consulting Group ( www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: QMT on Xen? (I hope not)
I run QMT 64 on XEN and it works. Best wishes, Edwin On 08/05/2010 09:45 AM, Eric Shubert wrote: I've been running VMware Server. ESXi is a bit more limited hardware wise than I'd like. I also like the idea of being able to do what I want with the host software. So far though, the only thing I really run directly on the host is ntpd (which the guests use to sync time). I've thought about alternatives, but nothing has seemed very mature. I'll probably give KVM a go after CentOS6 is out for a while. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: QMT on Xen? (I hope not)
I run on Plain old Xen as included in CenOS 5.4 - 64bit Best wishes, Edwin On 08/05/2010 10:02 AM, Patrick Ring wrote: Xen (as in the open source) or XenServer? Just curious for clarification Thanks, Patrick Ring -- Sent from my BlackBerry Wireless Device -Original Message- From: Edwin Casimero ecasim...@gmail.com To: qmailtoaster-list@qmailtoaster.com qmailtoaster-list@qmailtoaster.com CC: Eric Shubert e...@shubes.net Sent: Wed Aug 04 20:56:41 2010 Subject: Re: [qmailtoaster] Re: QMT on Xen? (I hope not) I run QMT 64 on XEN and it works. Best wishes, Edwin On 08/05/2010 09:45 AM, Eric Shubert wrote: I've been running VMware Server. ESXi is a bit more limited hardware wise than I'd like. I also like the idea of being able to do what I want with the host software. So far though, the only thing I really run directly on the host is ntpd (which the guests use to sync time). I've thought about alternatives, but nothing has seemed very mature. I'll probably give KVM a go after CentOS6 is out for a while. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: QMT on Xen? (I hope not)
When I'm forced to move, I will move. On Thu, Aug 5, 2010 at 11:19 AM, Eric Shubert e...@shubes.net wrote: Sorry to hear that, Edwin. I understand that Xen will not be included with COS6. Do you plan to convert to KVM when COS6 comes out, or have you not decided what to do yet? Just curious. -- -Eric 'shubes' Edwin Casimero wrote: I run on Plain old Xen as included in CenOS 5.4 - 64bit Best wishes, Edwin On 08/05/2010 10:02 AM, Patrick Ring wrote: Xen (as in the open source) or XenServer? Just curious for clarification Thanks, Patrick Ring -- Sent from my BlackBerry Wireless Device -Original Message- From: Edwin Casimero ecasim...@gmail.com To: qmailtoaster-list@qmailtoaster.com qmailtoaster-list@qmailtoaster.com CC: Eric Shubert e...@shubes.net Sent: Wed Aug 04 20:56:41 2010 Subject: Re: [qmailtoaster] Re: QMT on Xen? (I hope not) I run QMT 64 on XEN and it works. Best wishes, Edwin On 08/05/2010 09:45 AM, Eric Shubert wrote: I've been running VMware Server. ESXi is a bit more limited hardware wise than I'd like. I also like the idea of being able to do what I want with the host software. So far though, the only thing I really run directly on the host is ntpd (which the guests use to sync time). I've thought about alternatives, but nothing has seemed very mature. I'll probably give KVM a go after CentOS6 is out for a while. - Qmailtoaster is sponsored by Vickers Consulting Group ( www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group ( www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] VM vs stand alone server
I get away with 2 gigs of memory per VM using XEN using CentOS 64bit. On Thu, Jul 15, 2010 at 8:49 AM, Scott Hughes sonicscott9...@gmail.com wrote: I have just ordered a brand new Dell 64 bit server with 8 gigs of memory to migrate my QMT server to. My question is this: Will QMT be slower if I set this machine up as a VM instead of a stand alone server? I plan to give it 4 gigs of memory if I go with a VM. Also, is the 64 bit version of QMT better than the 32 bit in speed and performance? Is there any reason NOT to use the 64 bit version of QMT? Thanks, Scott - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.    To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Pls Help My QmailToaster emails go through to Hotmail
Pls Help My QmailToaster emails go through to Hotmail. I am having problems sending to Hotmail.com I hope I can afford your services. Email me a quote. Best wishes, Edwin Casimero - Original Message - From: mailer-dae...@mail.100gmail.com To: m...@eurasiamotorsport.com Sent: Saturday, July 10, 2010 2:40 PM Subject: failure notice Hi. This is the qmail-send program at mail.100gmail.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. the_one_...@hotmail.com: Connected to 65.54.188.126 but sender was rejected. Remote host said: 550 SC-001 Mail rejected by Windows Live Hotmail for policy reasons. Reasons for rejection may be related to content with spam-like characteristics or IP/domain reputation problems. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit http://postmaster.live.com for email delivery information and support steve_...@hotmail.com: Connected to 65.54.188.126 but sender was rejected. Remote host said: 550 SC-001 Mail rejected by Windows Live Hotmail for policy reasons. Reasons for rejection may be related to content with spam-like characteristics or IP/domain reputation problems. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit http://postmaster.live.com for email delivery information and support - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Looks like it happens both on i386 and 64bit centos. Best wishes, Edwin On Mon, Jun 7, 2010 at 1:49 PM, Jake Vickers j...@qmailtoaster.com wrote: On 06/06/2010 01:12 PM, Eric Shubert wrote: Hey Jake, this looks like a bug in the qmail-toaster.spec file. I'd suggest that Eli file a bug report, but Mantis isn't up yet. I can have a look at the spec file myself, but I don't have a 64-bit test host (yet  - probably will soon). How do you want to handle this? (How's mantis coming along?) Mantis is not at the moment. I already know about this one - it was introduced from a previous feature request to not clobber the tcp.smtp file on upgrades. Can't remember if the fix is checked into the svn repo yet, but it will eventually be, once I get a few of these other fires stomped out. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
I just installed QMT ISO CentOS 5.x i386 under VMWare Server 2 and I got the correct tcp.smtp config file: [r...@mx tcprules.d]# cat tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1 :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 Hope this helps On Mon, Jun 7, 2010 at 2:02 PM, Eli Edwin Casimero e...@filipinowebservices.com wrote: Looks like it happens both on i386 and 64bit centos. Best wishes, Edwin On Mon, Jun 7, 2010 at 1:49 PM, Jake Vickers j...@qmailtoaster.com wrote: On 06/06/2010 01:12 PM, Eric Shubert wrote: Hey Jake, this looks like a bug in the qmail-toaster.spec file. I'd suggest that Eli file a bug report, but Mantis isn't up yet. I can have a look at the spec file myself, but I don't have a 64-bit test host (yet  - probably will soon). How do you want to handle this? (How's mantis coming along?) Mantis is not at the moment. I already know about this one - it was introduced from a previous feature request to not clobber the tcp.smtp file on upgrades. Can't remember if the fix is checked into the svn repo yet, but it will eventually be, once I get a few of these other fires stomped out. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Here's my first test virtual machine. I used a host machine CentOS 5.3 i386 with 4GB or memory on an Intel Q9400 I installed the latest OpenVZ virtualization platform. I used a Virtual Machine Centos 5.5 i386 template and gave it 1GB RAM and 10gb space. I installed qmailtoaster and I got the /etc/tcprules.d/tcp.smtp [r...@centos5home tcprules.d]# cat tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,DKSIGN=/var/qmail/control/domainkeys/%/private as you can see QMAILQUEUE is missing again. I will do more virtual machine installs in the future. Best wishes, Edwin On Thu, Jun 3, 2010 at 1:21 AM, Eric Shubert e...@shubes.net wrote: I'm wondering if perhaps this is a problem that's specific to x86_64 hosts. I wouldn't have guessed that, but who knows? I believe that Eli was going to attempt to recreate the problem. -- -Eric 'shubes' Tom Keyser wrote: I had the same problem, and others on the list helped me correct the problem last week. I'm running CentOS also, but had installed in December last year. On 5/29/2010 7:23 AM, Eli Edwin Casimero wrote: Super Thank You! This line in /etc/tcprules.d/tcp.smtp With the missing QMAILQUE was the culprit. How I got that I will have to make a few test installations. This problem is solved. Replication, later. - The 2nd line should look like this: :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 The QMAILQUEUE variable is what invokes simscan, and simscan invokes spamassassin and clamav. You'll also need the NOP0FKEY=1 variable. Do you have any idea how you ended up with no QMAILQUEUE variable? This is not the first time that has happened to someone recently. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -    Please visit qmailtoaster.com for the latest news, updates, and packages.    To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com    For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Mails are still being marked as spam - Reg.
I have to do this trick for every new installation. Has this been fixed with new RPMS? So that this is fixed in every new toaster install? On Fri, Jun 4, 2010 at 2:22 PM, Atul Paralikar a...@etisbew.com wrote: Eric, Earlier I have set the same parameter as below: score  FH_DATE_PAST_201X    0 Now I have done the changes as per your recommendations. Let me check it out for a day or two. -Original Message- From: Eric Shubert [mailto:e...@shubes.net] Sent: Thursday, June 03, 2010 9:30 PM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] Re: Mails are still being marked as spam - Reg. Atul Paralikar wrote: Even after applying all the recommendations for the problem addressing 2010 date. Mails are still marked as SPAM. Below is the part of the header of a genuine email from a genuine user. Have I missed anything? How to I check if the setting I applied are indeed working? Any command? = Received: (qmail 17534 invoked from network); 2 Jun 2010 07:14:41 -0500 Received: from mail.etisbew.com (74.55.177.18)  by mail.etisbew.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 2 Jun 2010 07:14:41 -0500 Received: (qmail 27525 invoked by uid 89); 2 Jun 2010 12:14:43 - Received: by simscan 1.4.0 ppid: 27519, pid: 27520, t: 0.4738s      scanners: attach: 1.4.0 clamav: 0.95.2/m:51/d:9865 spam: 3.2.5 X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on mail.etisbew.com */X-Spam-Level: */* */X-Spam-Status: Yes, score=5.3 required=5.0 tests=AWL,FB_ALMOST_SEX,/* */       FH_DATE_PAST_20XX,HTML_MESSAGE,RDNS_NONE autolearn=no version=3.2.5/* */X-Spam-Report: /* */       *  3.4 FH_DATE_PAST_20XX The date is grossly in the future./* */       *  3.1 FB_ALMOST_SEX BODY: It's almost sex, but not!/*       *  0.0 HTML_MESSAGE BODY: HTML included in message       *  0.1 RDNS_NONE Delivered to trusted network by a host with no rDNS       * -1.3 AWL AWL: From: address is in the auto white-list Received: from unknown (HELO mail32.elabs7.com) (208.66.204.244)  by mail.etisbew.com with SMTP; 2 Jun 2010 12:14:43 - Received-SPF: pass (mail.etisbew.com: SPF record at elabs7.com designates 208.66.204.244 as permitted sender) = Regards, Atul Paralikar It appears that the FH_DATE_PAST_20XX rule is still firing for you, so your fix appears to not have taken effect. You didn't say specifically what you did, so I'll simply tell you what you need. Add the following to /etc/mail/spamassassin/local.cf: # temporary fix for this rule score  FH_DATE_PAST_20XX    0.0 Then restart spamassassin: # qmail-spam restart (qmail-spam command is part of QTP, in case you don't have that yet) That should do it. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.    To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.    To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Super Thank You! This line in /etc/tcprules.d/tcp.smtp With the missing QMAILQUE was the culprit. How I got that I will have to make a few test installations. This problem is solved. Replication, later. - The 2nd line should look like this: :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 The QMAILQUEUE variable is what invokes simscan, and simscan invokes spamassassin and clamav. You'll also need the NOP0FKEY=1 variable. Do you have any idea how you ended up with no QMAILQUEUE variable? This is not the first time that has happened to someone recently. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
from /var/log/qmail/spamd/current @40004bff107e20f20b3c [2401] info: spamd: server killed by SIGTERM, shutting down @40004bff10881332f09c [15800] info: spamd: server started on port 783/tcp (running version 3.2.5) @40004bff10881332fc54 [15800] info: spamd: server pid: 15800 @40004bff108814dbd60c [15800] info: spamd: server successfully spawned child process, pid 15847 @40004bff108814dbe1c4 [15800] info: spamd: server successfully spawned child process, pid 15848 @40004bff108814dbe5ac [15800] info: prefork: child states: II And the last update of this file was this morning when I restarted qmail. No further updates on /var/log/qmail/spamd/current It's as if it was not running? Or no messages pass through it? I get my emails in and out though. Any thoughts? On Fri, May 28, 2010 at 3:28 PM, Janno Sannik ja...@foor.ee wrote: what spamd log says? On 28.05.2010 4:19, Eli Edwin Casimero wrote: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64 I just migrated my qmail toasters to 64 bit CentOS under XEN. Just noticed that spamassassin is not working. No X-Spam flags in the headers. I installed the missing Bignum module in perl in one installation --- solution: run cpan and install Crypt::OpenSSL::Bignum module. cpan install Crypt::OpenSSL::Bignum - I also tried the RPMForge method in another installation. in /var/log/qmail/spamd/current it does not complain anymore about missing bignum But there is still no change in the headers, no x-spam headers like in the old 32 bit installs. Am I missing something in the configuration? Any thoughts? Thanks in advance. Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -    Please visit qmailtoaster.com for the latest news, updates, and packages.    To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com    For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Tried this now: 1. zero / none / no simscan in all the log files archived or current of /var/log/qmail/smtp 2. /etc/tcprules.d/tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,DKSIGN=/var/qmail/control/domainkeys/%/private 3. /var/qmail/control/simcontrol :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif 4. Results of [r...@mail ~]# ls -l /var/qmail/bin/qmail-queue lrwxrwxrwx 1 root root 23 Apr 24 22:24 /var/qmail/bin/qmail-queue - /var/qmail/bin/qmail-dk [r...@mail ~]# ls -l /var/qmail/bin/qmail-dk -rws--x--x 1 qmailq qmail 50216 Apr 24 22:24 /var/qmail/bin/qmail-dk [r...@mail ~]# ls -l /var/qmail/bin/qmail-queue.orig -rws--x--x 1 qmailq qmail 25776 Apr 24 22:24 /var/qmail/bin/qmail-queue.orig What do you see? On Fri, May 28, 2010 at 11:49 PM, Eric Shubert e...@shubes.net wrote: It looks as though spamd is running, but simscan isn't getting the messages. Are you seeing simscan messages in the smtp log? Like: 05-28 08:34:15 simscan:[3519]:CLEAN (0.10/8.00):5.2445s:... Please post the contents of: /etc/tcprules.d/tcp.smtp /var/qmail/control/simcontrol Please post the results of these commands too: # ls -l /var/qmail/bin/qmail-queue # ls -l /var/qmail/bin/qmail-dk # ls -l /var/qmail/bin/qmail-queue.orig -- -Eric 'shubes' Martin Waschbuesch wrote: Try svc -u /var/qmail/supervise/spamd This will cause daemontools to start the service again. Then look at the log file and tell us what it says. Also, it maybe that spamd has been restarted and is running, but the logger is not. To verify which services are running, do qmailctl stat and see whether it lists spamd as running. Thanks, Martin Am 28.05.2010 um 14:09 schrieb Eli Edwin Casimero: from /var/log/qmail/spamd/current @40004bff107e20f20b3c [2401] info: spamd: server killed by SIGTERM, shutting down @40004bff10881332f09c [15800] info: spamd: server started on port 783/tcp (running version 3.2.5) @40004bff10881332fc54 [15800] info: spamd: server pid: 15800 @40004bff108814dbd60c [15800] info: spamd: server successfully spawned child process, pid 15847 @40004bff108814dbe1c4 [15800] info: spamd: server successfully spawned child process, pid 15848 @40004bff108814dbe5ac [15800] info: prefork: child states: II And the last update of this file was this morning when I restarted qmail. No further updates on /var/log/qmail/spamd/current It's as if it was not running?  Or no messages pass through it? I get my emails in and out though. Any thoughts? On Fri, May 28, 2010 at 3:28 PM, Janno Sannik ja...@foor.ee wrote: what spamd log says? On 28.05.2010 4:19, Eli Edwin Casimero wrote: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64 I just migrated my qmail toasters to 64 bit CentOS under XEN. Just noticed that spamassassin is not working. No X-Spam flags in the headers. I installed the missing Bignum module in perl in one installation --- solution: run cpan and install Crypt::OpenSSL::Bignum module. cpan install Crypt::OpenSSL::Bignum - I also tried the RPMForge method in another installation. in /var/log/qmail/spamd/current it does not complain anymore about missing bignum But there is still no change in the headers, no x-spam headers like in the old 32 bit installs. Am I missing something in the configuration? Any thoughts? Thanks in advance. Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Did this now. [r...@mail spamd]# svc -u /var/qmail/supervise/spamd [r...@mail spamd]# qmailctl stat authlib: up (pid 15752) 76535 seconds clamd: up (pid 15812) 76535 seconds imap4: up (pid 15764) 76535 seconds imap4-ssl: up (pid 15785) 76535 seconds pop3: up (pid 15745) 76536 seconds pop3-ssl: up (pid 15791) 76535 seconds send: up (pid 15720) 76536 seconds smtp: up (pid 15730) 76536 seconds spamd: up (pid 28495) 6544 seconds submission: up (pid 15736) 76536 seconds authlib/log: up (pid 15760) 76535 seconds clamd/log: up (pid 15814) 76535 seconds imap4/log: up (pid 15770) 76535 seconds imap4-ssl/log: up (pid 15787) 76535 seconds pop3/log: up (pid 15750) 76535 seconds pop3-ssl/log: up (pid 15797) 76535 seconds send/log: up (pid 15723) 76536 seconds smtp/log: up (pid 15732) 76536 seconds spamd/log: up (pid 28497) 6544 seconds submission/log: up (pid 15741) 76536 seconds /var/log/qmail/spamd/current did not update. The last update was 4:04am presumably crontab thing? Spamd seems to be running but the log is not updating. On Fri, May 28, 2010 at 8:54 PM, Martin Waschbuesch mar...@waschbuesch.de wrote: Try svc -u /var/qmail/supervise/spamd This will cause daemontools to start the service again. Then look at the log file and tell us what it says. Also, it maybe that spamd has been restarted and is running, but the logger is not. To verify which services are running, do qmailctl stat and see whether it lists spamd as running. Thanks, Martin Am 28.05.2010 um 14:09 schrieb Eli Edwin Casimero: from /var/log/qmail/spamd/current @40004bff107e20f20b3c [2401] info: spamd: server killed by SIGTERM, shutting down @40004bff10881332f09c [15800] info: spamd: server started on port 783/tcp (running version 3.2.5) @40004bff10881332fc54 [15800] info: spamd: server pid: 15800 @40004bff108814dbd60c [15800] info: spamd: server successfully spawned child process, pid 15847 @40004bff108814dbe1c4 [15800] info: spamd: server successfully spawned child process, pid 15848 @40004bff108814dbe5ac [15800] info: prefork: child states: II And the last update of this file was this morning when I restarted qmail. No further updates on /var/log/qmail/spamd/current It's as if it was not running?  Or no messages pass through it? I get my emails in and out though. Any thoughts? On Fri, May 28, 2010 at 3:28 PM, Janno Sannik ja...@foor.ee wrote: what spamd log says? On 28.05.2010 4:19, Eli Edwin Casimero wrote: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64 I just migrated my qmail toasters to 64 bit CentOS under XEN. Just noticed that spamassassin is not working. No X-Spam flags in the headers. I installed the missing Bignum module in perl in one installation --- solution: run cpan and install Crypt::OpenSSL::Bignum module. cpan install Crypt::OpenSSL::Bignum - I also tried the RPMForge method in another installation. in /var/log/qmail/spamd/current it does not complain anymore about missing bignum But there is still no change in the headers, no x-spam headers like in the old 32 bit installs. Am I missing something in the configuration? Any thoughts? Thanks in advance. Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -    Please visit qmailtoaster.com for the latest news, updates, and packages.    To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com    For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)   Vickers Consulting Group offers Qmailtoaster support and installations.    If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Tried this now: 1. zero / none / no simscan in all the log files archived or current of /var/log/qmail/smtp 2. /etc/tcprules.d/tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,DKSIGN=/var/qmail/control/domainkeys/%/private 3. /var/qmail/control/simcontrol :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif 4. Results of [r...@mail ~]# ls -l /var/qmail/bin/qmail-queue lrwxrwxrwx 1 root root 23 Apr 24 22:24 /var/qmail/bin/qmail-queue - /var/qmail/bin/qmail-dk [r...@mail ~]# ls -l /var/qmail/bin/qmail-dk -rws--x--x 1 qmailq qmail 50216 Apr 24 22:24 /var/qmail/bin/qmail-dk [r...@mail ~]# ls -l /var/qmail/bin/qmail-queue.orig -rws--x--x 1 qmailq qmail 25776 Apr 24 22:24 /var/qmail/bin/qmail-queue.orig What do you see? On Fri, May 28, 2010 at 11:49 PM, Eric Shubert e...@shubes.net wrote: It looks as though spamd is running, but simscan isn't getting the messages. Are you seeing simscan messages in the smtp log? Like: 05-28 08:34:15 simscan:[3519]:CLEAN (0.10/8.00):5.2445s:... Please post the contents of: /etc/tcprules.d/tcp.smtp /var/qmail/control/simcontrol Please post the results of these commands too: # ls -l /var/qmail/bin/qmail-queue # ls -l /var/qmail/bin/qmail-dk # ls -l /var/qmail/bin/qmail-queue.orig -- -Eric 'shubes' Martin Waschbuesch wrote: Try svc -u /var/qmail/supervise/spamd This will cause daemontools to start the service again. Then look at the log file and tell us what it says. Also, it maybe that spamd has been restarted and is running, but the logger is not. To verify which services are running, do qmailctl stat and see whether it lists spamd as running. Thanks, Martin Am 28.05.2010 um 14:09 schrieb Eli Edwin Casimero: from /var/log/qmail/spamd/current @40004bff107e20f20b3c [2401] info: spamd: server killed by SIGTERM, shutting down @40004bff10881332f09c [15800] info: spamd: server started on port 783/tcp (running version 3.2.5) @40004bff10881332fc54 [15800] info: spamd: server pid: 15800 @40004bff108814dbd60c [15800] info: spamd: server successfully spawned child process, pid 15847 @40004bff108814dbe1c4 [15800] info: spamd: server successfully spawned child process, pid 15848 @40004bff108814dbe5ac [15800] info: prefork: child states: II And the last update of this file was this morning when I restarted qmail. No further updates on /var/log/qmail/spamd/current It's as if it was not running?  Or no messages pass through it? I get my emails in and out though. Any thoughts? On Fri, May 28, 2010 at 3:28 PM, Janno Sannik ja...@foor.ee wrote: what spamd log says? On 28.05.2010 4:19, Eli Edwin Casimero wrote: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64 I just migrated my qmail toasters to 64 bit CentOS under XEN. Just noticed that spamassassin is not working. No X-Spam flags in the headers. I installed the missing Bignum module in perl in one installation --- solution: run cpan and install Crypt::OpenSSL::Bignum module. cpan install Crypt::OpenSSL::Bignum - I also tried the RPMForge method in another installation. in /var/log/qmail/spamd/current it does not complain anymore about missing bignum But there is still no change in the headers, no x-spam headers like in the old 32 bit installs. Am I missing something in the configuration? Any thoughts? Thanks in advance. Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Do you have any idea how you ended up with no QMAILQUEUE variable? This is not the first time that has happened to someone recently. My current theory is that all these installations have in common is that they are CentOS 5.4 x86_64 XEN installations hosted in CentOS 5.4 x86_64 XEN. Maybe XEN is at fault? This is 3 installations all with the same problem in the same host. I will try your advice and see if it fixes the problem. Be right back later with the results. I have a test machine at home and will make various installations and see if this can be replicated in other Virtual Machine installations. On Sat, May 29, 2010 at 6:26 AM, Eric Shubert e...@shubes.net wrote: Eli Edwin Casimero wrote: Tried this now: 1. zero / none / no simscan in all the log files archived or current of /var/log/qmail/smtp 2. /etc/tcprules.d/tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,DKSIGN=/var/qmail/control/domainkeys/%/private The 2nd line should look like this: :allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private,NOP0FCHECK=1 The QMAILQUEUE variable is what invokes simscan, and simscan invokes spamassassin and clamav. You'll also need the NOP0FKEY=1 variable. Do you have any idea how you ended up with no QMAILQUEUE variable? This is not the first time that has happened to someone recently. 3. /var/qmail/control/simcontrol :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif 4. Results of [r...@mail ~]# ls -l /var/qmail/bin/qmail-queue lrwxrwxrwx 1 root root 23 Apr 24 22:24 /var/qmail/bin/qmail-queue - /var/qmail/bin/qmail-dk [r...@mail ~]# ls -l /var/qmail/bin/qmail-dk -rws--x--x 1 qmailq qmail 50216 Apr 24 22:24 /var/qmail/bin/qmail-dk [r...@mail ~]# ls -l /var/qmail/bin/qmail-queue.orig -rws--x--x 1 qmailq qmail 25776 Apr 24 22:24 /var/qmail/bin/qmail-queue.orig What do you see? The rest looks ok to me. On Fri, May 28, 2010 at 11:49 PM, Eric Shubert e...@shubes.net wrote: It looks as though spamd is running, but simscan isn't getting the messages. Are you seeing simscan messages in the smtp log? Like: 05-28 08:34:15 simscan:[3519]:CLEAN (0.10/8.00):5.2445s:... Please post the contents of: /etc/tcprules.d/tcp.smtp /var/qmail/control/simcontrol Please post the results of these commands too: # ls -l /var/qmail/bin/qmail-queue # ls -l /var/qmail/bin/qmail-dk # ls -l /var/qmail/bin/qmail-queue.orig -- -Eric 'shubes' Martin Waschbuesch wrote: Try svc -u /var/qmail/supervise/spamd This will cause daemontools to start the service again. Then look at the log file and tell us what it says. Also, it maybe that spamd has been restarted and is running, but the logger is not. To verify which services are running, do qmailctl stat and see whether it lists spamd as running. Thanks, Martin Am 28.05.2010 um 14:09 schrieb Eli Edwin Casimero: from /var/log/qmail/spamd/current @40004bff107e20f20b3c [2401] info: spamd: server killed by SIGTERM, shutting down @40004bff10881332f09c [15800] info: spamd: server started on port 783/tcp (running version 3.2.5) @40004bff10881332fc54 [15800] info: spamd: server pid: 15800 @40004bff108814dbd60c [15800] info: spamd: server successfully spawned child process, pid 15847 @40004bff108814dbe1c4 [15800] info: spamd: server successfully spawned child process, pid 15848 @40004bff108814dbe5ac [15800] info: prefork: child states: II And the last update of this file was this morning when I restarted qmail. No further updates on /var/log/qmail/spamd/current It's as if it was not running? Â Or no messages pass through it? I get my emails in and out though. Any thoughts? On Fri, May 28, 2010 at 3:28 PM, Janno Sannik ja...@foor.ee wrote: what spamd log says? On 28.05.2010 4:19, Eli Edwin Casimero wrote: Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64 I just migrated my qmail toasters to 64 bit CentOS under XEN. Just noticed that spamassassin is not working. No X-Spam flags in the headers. I installed the missing Bignum module in perl in one installation --- solution: run cpan and install Crypt::OpenSSL::Bignum module. cpan install Crypt::OpenSSL::Bignum - I also tried the RPMForge method in another installation. in /var/log/qmail/spamd/current it does not complain anymore about missing bignum But there is still no change in the headers, no x-spam headers like in the old 32 bit installs. Am I missing something in the configuration? Any thoughts? Thanks in advance. Edwin -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Â Vickers Consulting
[qmailtoaster] Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64
Help. Spamassassin not working in CentOS 5.4 and 5.5 x86_64 I just migrated my qmail toasters to 64 bit CentOS under XEN. Just noticed that spamassassin is not working. No X-Spam flags in the headers. I installed the missing Bignum module in perl in one installation --- solution: run cpan and install Crypt::OpenSSL::Bignum module. cpan install Crypt::OpenSSL::Bignum - I also tried the RPMForge method in another installation. in /var/log/qmail/spamd/current it does not complain anymore about missing bignum But there is still no change in the headers, no x-spam headers like in the old 32 bit installs. Am I missing something in the configuration? Any thoughts? Thanks in advance. Edwin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: openvz
Can you we install the QMAILTOASTER ISO directly under OpenVZ like we do with VMWARE? On Fri, Apr 2, 2010 at 4:11 AM, Eric Shubert e...@shubes.net wrote: And I run several under VMware Server. OpenVZ should be fine, so long as you meet the OpenVZ HW requirements. Postmaster wrote: I have not tested it myself, but I am positive you can run it under openvz. I tested qmailtoaster under Zen and UML. Regards Alex On 01/04/2010 20:56, mattias wrote: can i run qmailtoaster on a vps running under openvz? - -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)  Vickers Consulting Group offers Qmailtoaster support and installations.   If you need professional help with your setup, contact them today! -   Please visit qmailtoaster.com for the latest news, updates, and packages.     To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com   For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Not receiving specific auto response email
Hi, Results are in. sender_nocheck=1 at tcp.smtp did it! It was the / in the email address of the auto responder that was causing it to be rejected. Thank you all! Best wishes, Edwin Phil Leinhauser wrote: There is a wiki article about how to fix that problem. It's not hard but it's not a simple line in a file. You'll have to rebuild the RPM. It's much easier to do what you did by turning off checking for bad addresses. I think you'll find most of us have the sender_nocheck=1. Phil Hi, I googled with this clue and found in the FAQ something about blackberries using / for their email address. So I edited my tcp.smtp and added sender_nocheck=1 Then did qmailctl cdb Restarted the machine to be sure. Then sent a test message to the automated machine... now waiting for a reply... hope it works... Waiting... will let you know the results... Edwin Casimero wrote: Hi, Thank you for the guidance, I looked in the smtp logs and found the culprit: The automated reply was using from: ITD_001/b...@bsp.gov.ph:: The line reads: *** CHKUSER rejected sender: from ITD_001/b...@bsp.gov.ph:: etc : invalid sender address format *** So it is the auto reply with the new ITD_001/b...@bsp.gov.ph email that is being rejected by qmailtoaster but is being accepted by gmail and yahoo. QUESTION: How do I adjust qmailtoaster to accept this sender format with the / in this case ITD_001/b...@bsp.gov.ph ? Jake Vickers wrote: Edwin Casimero wrote: I am guessing it is the badmimetypes So I nuked / removed everything in badmimetypes and did qmailctl cdb Is it okay to nuke badmimetypes? Edwin Casimero wrote: Hi Jake, I'm using qmlog. bsp.gov.ph is whitelisted. Logs show messages are successfully sent: 07-23 09:54:22 info msg 52760309: bytes 858 from postmas...@rbap.org qp 10678 uid 89 07-23 09:54:22 starting delivery 940: msg 52760309 to remote sdcrb-...@bsp.gov.p h 07-23 09:54:22 status: local 0/10 remote 3/60 07-23 09:54:24 delivery 940: success: User_and_password_not_set,_continuing_with out_authentication./sdcrb-...@bsp.gov.ph_121.127.5.19_accepted_message./Remote _host_said:_250_Ok:_queued_as_F04C6514006/ 07-23 09:54:24 status: local 0/10 remote 2/60 07-23 09:54:24 end msg 52760309 In the SPAMD logs I can see emails from @bsp.gov.ph being received but the email address is all coded long so I cannot specifically say I received it from sdcrb-...@bsp.gov.ph. Maybe I am looking at the wrong receiving log? Clearing the badmimetypes file is fine - everything should be commented out anyway. Same with badloadertypes. This log shows a message going out. What do the logs look like when the message comes in? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today
Re: [qmailtoaster] Not receiving specific auto response email
I am guessing it is the badmimetypes So I nuked / removed everything in badmimetypes and did qmailctl cdb Is it okay to nuke badmimetypes? Edwin Casimero wrote: Hi Jake, I'm using qmlog. bsp.gov.ph is whitelisted. Logs show messages are successfully sent: 07-23 09:54:22 info msg 52760309: bytes 858 from postmas...@rbap.org qp 10678 uid 89 07-23 09:54:22 starting delivery 940: msg 52760309 to remote sdcrb-...@bsp.gov.p h 07-23 09:54:22 status: local 0/10 remote 3/60 07-23 09:54:24 delivery 940: success: User_and_password_not_set,_continuing_with out_authentication./sdcrb-...@bsp.gov.ph_121.127.5.19_accepted_message./Remote _host_said:_250_Ok:_queued_as_F04C6514006/ 07-23 09:54:24 status: local 0/10 remote 2/60 07-23 09:54:24 end msg 52760309 In the SPAMD logs I can see emails from @bsp.gov.ph being received but the email address is all coded long so I cannot specifically say I received it from sdcrb-...@bsp.gov.ph. Maybe I am looking at the wrong receiving log? Jake Vickers wrote: Edwin Casimero wrote: Hi, I'm having problems not being able to receive a specific auto response email as attached. I can receive this auto reply on some other email address, but on my 2 qmailtoaster installs, I cannot receive this specific email. What gives? Thank you for the clues in advance. What shows in the logs? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Not receiving specific auto response email
Hi, Thank you for the guidance, I looked in the smtp logs and found the culprit: The automated reply was using from: ITD_001/b...@bsp.gov.ph:: The line reads: *** CHKUSER rejected sender: from ITD_001/b...@bsp.gov.ph:: etc : invalid sender address format *** So it is the auto reply with the new ITD_001/b...@bsp.gov.ph email that is being rejected by qmailtoaster but is being accepted by gmail and yahoo. QUESTION: How do I adjust qmailtoaster to accept this sender format with the / in this case ITD_001/b...@bsp.gov.ph ? Jake Vickers wrote: Edwin Casimero wrote: I am guessing it is the badmimetypes So I nuked / removed everything in badmimetypes and did qmailctl cdb Is it okay to nuke badmimetypes? Edwin Casimero wrote: Hi Jake, I'm using qmlog. bsp.gov.ph is whitelisted. Logs show messages are successfully sent: 07-23 09:54:22 info msg 52760309: bytes 858 from postmas...@rbap.org qp 10678 uid 89 07-23 09:54:22 starting delivery 940: msg 52760309 to remote sdcrb-...@bsp.gov.p h 07-23 09:54:22 status: local 0/10 remote 3/60 07-23 09:54:24 delivery 940: success: User_and_password_not_set,_continuing_with out_authentication./sdcrb-...@bsp.gov.ph_121.127.5.19_accepted_message./Remote _host_said:_250_Ok:_queued_as_F04C6514006/ 07-23 09:54:24 status: local 0/10 remote 2/60 07-23 09:54:24 end msg 52760309 In the SPAMD logs I can see emails from @bsp.gov.ph being received but the email address is all coded long so I cannot specifically say I received it from sdcrb-...@bsp.gov.ph. Maybe I am looking at the wrong receiving log? Clearing the badmimetypes file is fine - everything should be commented out anyway. Same with badloadertypes. This log shows a message going out. What do the logs look like when the message comes in? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Not receiving specific auto response email
Hi, I googled with this clue and found in the FAQ something about blackberries using / for their email address. So I edited my tcp.smtp and added sender_nocheck=1 Then did qmailctl cdb Restarted the machine to be sure. Then sent a test message to the automated machine... now waiting for a reply... hope it works... Waiting... will let you know the results... Edwin Casimero wrote: Hi, Thank you for the guidance, I looked in the smtp logs and found the culprit: The automated reply was using from: ITD_001/b...@bsp.gov.ph:: The line reads: *** CHKUSER rejected sender: from ITD_001/b...@bsp.gov.ph:: etc : invalid sender address format *** So it is the auto reply with the new ITD_001/b...@bsp.gov.ph email that is being rejected by qmailtoaster but is being accepted by gmail and yahoo. QUESTION: How do I adjust qmailtoaster to accept this sender format with the / in this case ITD_001/b...@bsp.gov.ph ? Jake Vickers wrote: Edwin Casimero wrote: I am guessing it is the badmimetypes So I nuked / removed everything in badmimetypes and did qmailctl cdb Is it okay to nuke badmimetypes? Edwin Casimero wrote: Hi Jake, I'm using qmlog. bsp.gov.ph is whitelisted. Logs show messages are successfully sent: 07-23 09:54:22 info msg 52760309: bytes 858 from postmas...@rbap.org qp 10678 uid 89 07-23 09:54:22 starting delivery 940: msg 52760309 to remote sdcrb-...@bsp.gov.p h 07-23 09:54:22 status: local 0/10 remote 3/60 07-23 09:54:24 delivery 940: success: User_and_password_not_set,_continuing_with out_authentication./sdcrb-...@bsp.gov.ph_121.127.5.19_accepted_message./Remote _host_said:_250_Ok:_queued_as_F04C6514006/ 07-23 09:54:24 status: local 0/10 remote 2/60 07-23 09:54:24 end msg 52760309 In the SPAMD logs I can see emails from @bsp.gov.ph being received but the email address is all coded long so I cannot specifically say I received it from sdcrb-...@bsp.gov.ph. Maybe I am looking at the wrong receiving log? Clearing the badmimetypes file is fine - everything should be commented out anyway. Same with badloadertypes. This log shows a message going out. What do the logs look like when the message comes in? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Not receiving specific auto response email
Hi, I'm having problems not being able to receive a specific auto response email as attached. I can receive this auto reply on some other email address, but on my 2 qmailtoaster installs, I cannot receive this specific email. What gives? Thank you for the clues in advance. Best wishes, Edwin ---BeginMessage--- - Forwarded Message From: sdcrb-...@bsp.gov.ph sdcrb-...@bsp.gov.ph To: Edwin Casimero ecasim...@yahoo.com Sent: Wednesday, July 22, 2009 4:09:15 PM Subject: Return Receipt Failure : Test for RBAP 3:50pm . . . . . . . . . .SUPERVISORY DATA CENTER . Date : 7/22/2009 4:09:15 PM To : . Your email Test for RBAP 3:50pm has an invalid subject. Kindly resend report using correct format as prescribed per Memorandum Letter to All Banks dated 7 March 2006. Correct format for the subject is as follows: Subject: FRP(space)bankname,(space)day(space)month(space)year For inquiries, correct format should be: /p INQUIRY: your inquiries . Note : This email address is used for the sole purpose of FRP report submission and inquiries. ---End Message--- - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Not receiving specific auto response email
Hi Jake, I'm using qmlog. bsp.gov.ph is whitelisted. Logs show messages are successfully sent: 07-23 09:54:22 info msg 52760309: bytes 858 from postmas...@rbap.org qp 10678 uid 89 07-23 09:54:22 starting delivery 940: msg 52760309 to remote sdcrb-...@bsp.gov.p h 07-23 09:54:22 status: local 0/10 remote 3/60 07-23 09:54:24 delivery 940: success: User_and_password_not_set,_continuing_with out_authentication./sdcrb-...@bsp.gov.ph_121.127.5.19_accepted_message./Remote _host_said:_250_Ok:_queued_as_F04C6514006/ 07-23 09:54:24 status: local 0/10 remote 2/60 07-23 09:54:24 end msg 52760309 In the SPAMD logs I can see emails from @bsp.gov.ph being received but the email address is all coded long so I cannot specifically say I received it from sdcrb-...@bsp.gov.ph. Maybe I am looking at the wrong receiving log? Jake Vickers wrote: Edwin Casimero wrote: Hi, I'm having problems not being able to receive a specific auto response email as attached. I can receive this auto reply on some other email address, but on my 2 qmailtoaster installs, I cannot receive this specific email. What gives? Thank you for the clues in advance. What shows in the logs? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] MySQL tuning
Thanks for the performance tweak reminder. I think MySQL tuning on qmailtoaster only works when you have lots and lots and lots of users / email addresses. I got a big performance boost by using SUSE Linux and IBM JFS instead of EXT3. I use toaster in my office server to store all our email for all past years. IBM JFS is more suited to handle thousands of files in 1 folder. Best wishes, Edwin Phil Leinhauser wrote: Last week Jake mentioned about tuning my MySQL might help my QMT from choking and thus stop the Earth from slowing it's rotation and orbit speed, etc... I did a bit of digging and thought I would share what I found. Here is a guy that wrote a nice script for testing the current performance and makes recommenations for improvement. http://www.day32.com/MySQL http://www.day32.com/MySQL/tuning-primer.sh In order for the script to have a good snapshot of what is happening, your MySQL should be running for at least 48 hours. When I ran it, it recommended the following: long_query_time = 5 WAS 10 query-cache-type = 1 WAS NOT RUNNING query-cache-size = 20M JUST A STARTING POINT table_cache = 100 WAS RUNNING 64 AND FULL. There are 78 tables in my database so I just picked 100. I restarted the MySQLd and so far it seems to have helped. It takes a few days for my systems to start slowing so time will tell. Hopefully this will help others tweak their servers and maybe even keep the Earth from crashing into the sun... Phil - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Clamav update looking for Clamav 0.95.1
Hi, I just upgraded Clamav to 0.95 and I check the logs and now Clamav update is looking for 0.95.1 Just a friendly community feedback. Best wishes, Edwin - Managed Qmailtoaster servers are now available Visit http://qmailtoaster.com/QMTManaged.html to order yours today! Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: testing-unsubscr...@qmailtoaster.com For additional commands, e-mail: testing-h...@qmailtoaster.com
Re: [qmailtoaster] Can QMailToaster Handle 10,000 email addresses?
Hi Jake, The data center I rent is offering storage area network (SAN), 10GB. If I load the /home/vpopmail directory in the SAN, will qmailtoaster be able to work with that? Best wishes, Edwin Jake Vickers wrote: Edwin Casimero wrote: Hi, I have an inquiry to handle 10,000 email addresses. I'm thinking 500 MB to 1,000 mb per email address. Can QmailToaster handle 10,000 email addresses? I am also thinking of the hardware specifications. If at 500 MB per email address, easily I will need 5,000 GB of hard drive space. What kind of server will I need? The traffic generated? Will 1 qmailtoaster on 1 super server do? Will 64bit be needed? Anyone who is managing such a monster right now share his story? I've set up machines for ISPs that meet your requirements. First thing you need to do is sit down for a day (at least) and plan this all out. Think of your needs (and the needs of your users) 12 months down the road, as well as 24 months and beyond. Will the user base expand? By how much? You don't want to have to completely rebuild the whole thing (and all the pains of moving email accounts, messages, etc. associated with this) because of short sightedness. You'll need strong hardware. I do not set up any 64 bit machines since I do not see any benefits from this setup and only problems with packages, compiling, compatibility, etc., that do not outweigh any performance boost you'd get from 64 bit. You will definitely need to setup mysql for a high load. The stock mysql is not set up for this in any way, shape, or form. You also need to look at setting up apache for high loads if you plan on users using webmail as well. I would not run too many/any web pages off of a mail server set up for this type of environment. If you're talking a load like that, then you have the funds to put your websites on a separate server. If the users will be using IMAP, then you need to REALLY look at your infrastructure. Courier is not set up for anything other than a small office/home office by default and will really need tweaking. In the past when I set up systems like this I normally went with clustering. Share a common backend and the have multiple front end machines accepting mail/delivering mail and all serving webmail. Each machine you put in the cluster will decrease the load point by a compounding factor. 2 machines decreases the load on each machine by 1/2, 3 by 1/3, etc. This also makes drive space easier in the event you want to increase space at a later date. 2 machines running NFS and replicated on a constant basis would allow you to either add drives (depending on your setup) on the fly whenever needed. Anyway, long and short of it, make sure you have it all planned out. I've set up ISP style arrays with multiple machines that served (at the time, no idea what they're running now) hundreds of thousands of users. Qmail can handle it, as can any MTA. It all depends on how well it was planned out and built for. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Can QMailToaster Handle 10,000 email addresses?
Jake, Oopss... sorry, I meant the data center offered 10TB SAN storage. Best wishes, Edwin Jake Vickers wrote: Edwin Casimero wrote: Hi Jake, The data center I rent is offering storage area network (SAN), 10GB. If I load the /home/vpopmail directory in the SAN, will qmailtoaster be able to work with that? A SAN is a good start. You get the added bonus of not having to maintain it yourself. 10G is small for what you've already asked for. You had asked for 500M-1G mailboxes, so that would yield 10-20 mailboxes. While emails are located in /home/vpopmail and would need to be shared, there are a few other considerations/files/services that need to be shared, such as control files, the database containing the users itself, spamassassin data, etc. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Can QMailToaster Handle 10,000 email addresses?
Hi, I have an inquiry to handle 10,000 email addresses. I'm thinking 500 MB to 1,000 mb per email address. Can QmailToaster handle 10,000 email addresses? I am also thinking of the hardware specifications. If at 500 MB per email address, easily I will need 5,000 GB of hard drive space. What kind of server will I need? The traffic generated? Will 1 qmailtoaster on 1 super server do? Will 64bit be needed? Anyone who is managing such a monster right now share his story? Best wishes, Edwin - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Can QMailToaster Handle 10,000 email addresses?
Thank you for all the advices. This is the offer of the data center: 10TB SAN (storage area network) 8 core cpu with up to 32gb of memory, gigabit connected to the internet. Will a single install of CentOS 5.x 32-bit be enough to handle 10,000 email addresses? Or do I need 64-bit CentOS to be able to handle 32GB of memory? Or do I still need a clustered qmailtoaster for the front end? Which I do not know how to do. Is there a link how to do a clustered qmailtoaster? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] How do you suspend an email box or several email boxes?
How do you suspend an email box or several email boxes? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Securing a QmailToaster ONLY dedicated server
ModSecurity! I have modsecurity in one of my boxes which is a mixed server with qmailtoaster and other web sites. Anyone using Mod_Security in their dedicated qmailtoaster only server? Positive / Negative experience? Yay or Nay? --- Eric Shubes wrote: Edwin Casimero wrote: Hello, I want to setup a dedicated QmailToaster only box. I want to exchange notes with how you suggest to go about securing this qmailtoaster only box. My current resources point to: - Bastille Linux - APF Firewall - Mod Security - PHP.ini hardening, disallowing certain functions - making /tmp noexec - http://www.michael-and-mary.net/intro/node/12 Any other tips? TTBOMK (which isn't exhaustive by any means), the stock toaster is fairly (adequately in most instances) secure. It includes a nice iptables firewall configuration. Since a dedicated QmailToaster box has no real users, many traditional security concerns are avoided. If you come up with any changes to the stock toaster which would make it more secure, please be sure to share them here. They would likely be integrated in the stock toaster. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Securing a QmailToaster ONLY dedicated server
Hello, I want to setup a dedicated QmailToaster only box. I want to exchange notes with how you suggest to go about securing this qmailtoaster only box. My current resources point to: - Bastille Linux - APF Firewall - Mod Security - PHP.ini hardening, disallowing certain functions - making /tmp noexec - http://www.michael-and-mary.net/intro/node/12 Any other tips? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Per Domain Backup, Restore and Migrate script?
Hello, Thanks for the backup and restore script that does the WHOLE server found at http://v2gnu.com/qmail/ . Great stuff, I would need a ton of hard disk space. My new question is: Do you have a script to backup and restore PER DOMAIN? Say I have 5 domains hosted in my current server, I'd like to backup restore or migrate per domain 1 at a time to a different qmailtoaster server. In this method, I can migrate 1 domain at a time to 1 server or to different qmailtoaster servers. Any ready script for this one or a clue how this can be done? Thanks in advance. Edwin - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] How to MIGRATE Qmailtoaster to new server?
Hello, I got a new dedicated server and I want to MIGRATE my existing qmailtoaster to the new server. OS is CentOS 4.4 and Qmailtoaster (old IP address) migrating to OS is CentOS 4.4 and Qmailtoaster (new IP Address) I have several hundred email accounts, I'd like the migration to be as painless as possible from the point of view of the email users. Any tool, tips, easy method, failsafe methods out there? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] clamd spamd getting stuck, SURBL active
Ha ha ha, yes, you are correct.I'm just loving SURBL so much, I forgot to try it.I'll do it now and report.On 9/12/06, Erik Espinoza [EMAIL PROTECTED] wrote: But now I have this problem: I get spamd and clamd processes stuck. Why not disable this and find out?- QmailToaster hosted by: VR Hosted http://www.vr.org -To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] clamd spamd getting stuck, SURBL active
Hmmm... I just noticed that the problem stuck spamd process seems to have exited itself after some 20 minutes.I will report back.On 9/12/06, Edwin Casimero [EMAIL PROTECTED] wrote:Ha ha ha, yes, you are correct. I'm just loving SURBL so much, I forgot to try it.I'll do it now and report.On 9/12/06, Erik Espinoza [EMAIL PROTECTED] wrote: But now I have this problem: I get spamd and clamd processes stuck. Why not disable this and find out?- QmailToaster hosted by: VR Hosted http://www.vr.org -To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Howto Install Mail::SpamAssassin::Plugin::URIDNSBL
Guys,I want to install the PLUGIN:Mail::SpamAssassin::Plugin::URIDNSBLI am using the most recent spamassassin-toaster-3.1.4 1.3.2 09/01/2006 02:49When I use webmin to install additional plugins like the above URIDNSBL, it wants me first to upgrade to spamassassin 3.1.5.I am afraid this will break my qmailtoaster configuration.What is your recommendation for me to be able to install the URIDNSBL plugin?Thanks in advance.P.S. The functionality of URIDNSBL will allow us to catch / mark more spam via DNS Blacklists. -http://spamassassin.apache.org/full/3.1.x/dist/rules/25_uribl.cf# Requires the Mail::SpamAssassin::Plugin::URIDNSBL plugin be loaded. # Note that this plugin defines a new config setting, 'uridnsbl',# which lists the zones to look up in advance. The rules will# not hit unless each rule has a corresponding 'uridnsbl' line.ifplugin Mail::SpamAssassin::Plugin::URIDNSBL # URI-DNSBL lookups can take a *maximum* of this many seconds past the# normal DNSBL lookups.uridnsbl_timeout 2urirhssub URIBL_SC_SURBL multi.surbl.org . A 2body URIBL_SC_SURBL eval:check_uridnsbl('URIBL_SC_SURBL')describe URIBL_SC_SURBL Contains an URL listed in the SC SURBL blocklisttflags URIBL_SC_SURBL net#reuse URIBL_SC_SURBL endif # Mail::SpamAssassin::Plugin::URIDNSBL
Re: [qmailtoaster] Howto Install Mail::SpamAssassin::Plugin::URIDNSBL
Wow! That was a fast reply, Erik. Thanks!On 9/10/06, Erik Espinoza [EMAIL PROTECTED] wrote: We should have an update for this soon.ErikOn 9/10/06, Edwin Casimero [EMAIL PROTECTED] wrote: Guys, I want to install the PLUGIN: Mail::SpamAssassin::Plugin::URIDNSBL I am using the most recent spamassassin-toaster-3.1.41.3.209/01/2006 02:49 When I use webmin to install additional plugins like the above URIDNSBL, it wants me first to upgrade to spamassassin 3.1.5 . I am afraid this will break my qmailtoaster configuration. What is your recommendation for me to be able to install the URIDNSBL plugin? Thanks in advance. P.S. The functionality of URIDNSBL will allow us to catch / mark more spam via DNS Blacklists. - http://spamassassin.apache.org/full/3.1.x/dist/rules/25_uribl.cf # Requires the Mail::SpamAssassin::Plugin::URIDNSBL plugin be loaded. # Note that this plugin defines a new config setting, 'uridnsbl', # which lists the zones to look up in advance.The rules will # not hit unless each rule has a corresponding 'uridnsbl' line. ifplugin Mail::SpamAssassin::Plugin::URIDNSBL # URI-DNSBL lookups can take a *maximum* of this many seconds past the # normal DNSBL lookups. uridnsbl_timeout2 urirhssubURIBL_SC_SURBLmulti.surbl.org .A 2 bodyURIBL_SC_SURBL eval:check_uridnsbl('URIBL_SC_SURBL') describeURIBL_SC_SURBLContains an URL listed in the SC SURBL blocklist tflagsURIBL_SC_SURBLnet #reuseURIBL_SC_SURBL endif# Mail::SpamAssassin::Plugin::URIDNSBL - QmailToaster hosted by: VR Hosted http://www.vr.org- To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] www.dnsreport.com: WARN - Mail server host name in greeting
Help, I get rejected by strict email servers: Hi. This is the qmail-send program at . I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. [EMAIL PROTECTED]: Connected to 210.130.0.123 but my name was rejected. Remote host said: 501 5.0.0 HELO requires domain address I'm not going to try again; this message has been in the queue too long. When I try to check each and every domain I host in my qmailtoaster installation using www.dnsreport.com: http://www.dnsreport.com/tools/dnsreport.ch?domain=asianf3.net WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). This probably won't cause any harm, but is a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. mail.asianf3.net claims to be invalid hostname 'Welcome': 220 Welcome to Qmail Toaster Ver. 1.2 smtp Server server9.filipinowebservices.com ESMTP -- Question: What should I be adjusting in /var/qmail/control or somewhere else to be able to meet the requirements above?
Re: [qmailtoaster] www.dnsreport.com: WARN - Mail server host name in greeting
For the benefit of others: here is the final solution. I removed the default /var/control/smtpgreeting and replaced it with my default smtp server hostname. In my case mail.filipinowebservices.com is now the sole content of /var/qmail/control/smtpgreeting This now passes the www.dnsreport.com test whether for my own filipinowebservices.com or for my customer asianf3.net http://www.dnsreport.com/tools/dnsreport.ch?domain=asianf3.net Mail server host name in greeting OK: All of your mailservers have their host name in the greeting: mail.asianf3.net: 220 mail.filipinowebservices.com ESMTP Thanks Erik! Regards, Edwin Erik Espinoza wrote: /var/qmail/control/smtpgreeting On 3/11/06, Edwin Casimero [EMAIL PROTECTED] wrote: Help, I get rejected by strict email servers: Hi. This is the qmail-send program at . I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. [EMAIL PROTECTED]: Connected to 210.130.0.123 but my name was rejected. Remote host said: 501 5.0.0 HELO requires domain address I'm not going to try again; this message has been in the queue too long. When I try to check each and every domain I host in my qmailtoaster installation using www.dnsreport.com: http://www.dnsreport.com/tools/dnsreport.ch?domain=asianf3.net WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). This probably won't cause any harm, but is a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. mail.asianf3.net claims to be invalid hostname 'Welcome': 220 Welcome to Qmail Toaster Ver. 1.2 smtp Server server9.filipinowebservices.com ESMTP -- Question: What should I be adjusting in /var/qmail/control or somewhere else to be able to meet the requirements above? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] How to use /var/qmail/control/blacklist only against INCOMING? (do not check OUTGOING)
Erik, He he he... I already did that, but now incoming mail is not checked against any blacklists. Are you saying that by default qmailtoaster does not check the blacklist if you send via smtp-ssl? -Edwin- Erik Espinoza wrote: Remove everything from the /var/qmail/control/blacklists file On 3/7/06, Edwin Casimero [EMAIL PROTECTED] wrote: Erik, How do I run plain smtp without blacklists? Which files do I toggle? -Edwin- Erik Espinoza wrote: I run smtp-ssl without blacklists and let my users send e-mail thru that. On 3/7/06, Edwin Casimero [EMAIL PROTECTED] wrote: Hello, I use RBLs on /var/qmail/control/blacklists and it works. But it works TOO WELL. It applies the RBLs on both INCOMING and email and OUTGOING email. I have customers who use dynamic IPs on their DSLs and some of them are blacklisted. I need to ALLOW all outgoing email (via outlook smtp) without them being checked via the /var/qmail/control/blacklists while still checking all incoming email? How do I do this? What files do I adjust? -Edwin- - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] How to use /var/qmail/control/blacklist only against INCOMING? (do not check OUTGOING)
Question: how do you configure smtp-ssl without blacklists? -edwin- Erik Espinoza wrote: I run smtp-ssl without blacklists and let my users send e-mail thru that. On 3/7/06, Edwin Casimero [EMAIL PROTECTED] wrote: Hello, I use RBLs on /var/qmail/control/blacklists and it works. But it works TOO WELL. It applies the RBLs on both INCOMING and email and OUTGOING email. I have customers who use dynamic IPs on their DSLs and some of them are blacklisted. I need to ALLOW all outgoing email (via outlook smtp) without them being checked via the /var/qmail/control/blacklists while still checking all incoming email? How do I do this? What files do I adjust? -Edwin- - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server!
Help! I have qmailtoaster on CentOS 4.2 and it has been running fine for several months now. I host several dozen domains and emails running, All of a sudden today, I cannot send email outside my own server. I looked at the RBLs and spamcop has me blacklisted. I then removed all RBLs in my /var/qmail/control/blacklists. I did the same for a backup server that also has qmailtoaster. Now I tested my backup server and it sends and receives emails fine. But my main email server with qmailtoaster can only receive emails but cannot receive emails! My main email server cannot send to yahoo, cannot send to google, cannot send to my backup server which has RBLs removed in /var/qmail/control/blacklists. What could possibly be wrong with my qmailtoaster? How can I fix it? Which logs to check?
Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server!
Newbie here again, followed your suggestion:# qmailctl queuemessages in queue: 40715messages in queue but not yet preprocessed: 0Now I see it. 40,715 messages. What is wrong? What must I do?Sorry, I am now officially in a bit of panic. On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: qmailctl queue shows any queue mails?? - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 6:13 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! I send email from [EMAIL PROTECTED] to my yahoo, gmail and fertilithelp.org (on a backup server) and I get nothing.But if I send it to [EMAIL PROTECTED] or [EMAIL PROTECTED] which resides in the same server, I get the email.Help. On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: how you determine the issue, you cant send email to outside? Any message or any error log file? - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:50 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! Here is what I see in the log.I send email using squirrelmail from [EMAIL PROTECTED] (on the server that has problems) to a new and working email at [EMAIL PROTECTED] (on my backup server that is working).As expected, no email is actually sent to those addresses.But if I try to send to a domain within my server [EMAIL PROTECTED] , it is sent.I look at /smtp/current and it says:@400043e7193a0dff4a44 tcpserver: status: 11/100@400043e7193a0dff61b4 tcpserver: pid 1054 from 127.0.0.1@400043e7193a0dff6984 tcpserver: ok 1054 server9.filipinowebservices.com:127.0.0.1:25 :127.0.0.1::41336 @400043e7193a0e5015dc CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay@400043e7193a0e53a7ec CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay@400043e7193a0e56c0e4 CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay@400043e7193a11f776e4 tcpserver: end 1054 status 0Thanks for sticking with me.I still need your help On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: if you cant send an email to outside, an error will prompt out in the log /var/log/qmail/send/current or ../smtp/current - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:32 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! I checked /var/log/qmail/send/current and I do not see any activity that says I was rejected by spamcop or the other RBLs.I am on a fixed IP address 209.11.243.202.I can send emails within my own server, with different domain names; but I cannot send outside my server.I operate a 2nd server also with qmailtoaster that still works fine.Any other ideas? On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: check /var/log/qmail/send/current If being block by RBLs List, are you using a dynamic internet connection? If yes, disconnect your Internet and reconnect, after it changes new IP, it should works well. - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:08 PM Subject: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! Help!I have qmailtoaster on CentOS 4.2 and it has been running fine for several months now.I host several dozen domains and emails running,All of a sudden today, I cannot send email outside my own server.I looked at the RBLs and spamcop has me blacklisted.I then removed all RBLs in my /var/qmail/control/blacklists.I did the same for a backup server
Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server!
More info# qmailctl statclamd: up (pid 3153) 4276 secondsimap4: up (pid 3180) 4276 secondsimap4-ssl: up (pid 3154) 4276 secondspop3: up (pid 3152) 4277 secondspop3-ssl: up (pid 3186) 4277 seconds send: up (pid 3156) 4277 secondssmtp: up (pid 3189) 4277 secondsspamd: up (pid 3200) 4277 secondsclamd/log: up (pid 3173) 4277 secondsimap4/log: up (pid 3171) 4277 secondsimap4-ssl/log: up (pid 3161) 4277 seconds pop3/log: up (pid 3159) 4277 secondspop3-ssl/log: up (pid 3151) 4277 secondssend/log: up (pid 3182) 4277 secondssmtp/log: up (pid 3155) 4277 secondsspamd/log: up (pid 3199) 4277 secondsHelp. On 2/6/06, Edwin Casimero [EMAIL PROTECTED] wrote: Newbie here again, followed your suggestion:# qmailctl queuemessages in queue: 40715messages in queue but not yet preprocessed: 0Now I see it. 40,715 messages. What is wrong? What must I do?Sorry, I am now officially in a bit of panic. On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: qmailctl queue shows any queue mails?? - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 6:13 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! I send email from [EMAIL PROTECTED] to my yahoo, gmail and fertilithelp.org (on a backup server) and I get nothing.But if I send it to [EMAIL PROTECTED] or [EMAIL PROTECTED] which resides in the same server, I get the email.Help. On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: how you determine the issue, you cant send email to outside? Any message or any error log file? - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:50 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! Here is what I see in the log.I send email using squirrelmail from [EMAIL PROTECTED] (on the server that has problems) to a new and working email at [EMAIL PROTECTED] (on my backup server that is working).As expected, no email is actually sent to those addresses.But if I try to send to a domain within my server [EMAIL PROTECTED] , it is sent.I look at /smtp/current and it says:@400043e7193a0dff4a44 tcpserver: status: 11/100@400043e7193a0dff61b4 tcpserver: pid 1054 from 127.0.0.1@400043e7193a0dff6984 tcpserver: ok 1054 server9.filipinowebservices.com:127.0.0.1:25 :127.0.0.1::41336 @400043e7193a0e5015dc CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay@400043e7193a0e53a7ec CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay@400043e7193a0e56c0e4 CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay@400043e7193a11f776e4 tcpserver: end 1054 status 0Thanks for sticking with me.I still need your help On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: if you cant send an email to outside, an error will prompt out in the log /var/log/qmail/send/current or ../smtp/current - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:32 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! I checked /var/log/qmail/send/current and I do not see any activity that says I was rejected by spamcop or the other RBLs.I am on a fixed IP address 209.11.243.202.I can send emails within my own server, with different domain names; but I cannot send outside my server.I operate a 2nd server also with qmailtoaster that still works fine.Any other ideas? On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: check /var/log/qmail/send/current If being block by RBLs List, are you using a dynamic internet connection? If yes, disconnect your Internet and reconnect, after it changes new IP, it should works well. - Original Message - From: Edwin Casimero To: qmailtoaster-list
Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server!
I will try to send email using the faulty email server. Am sending now to this mailing list. how you determine the issue, you cant send email to outside? Any message or any error log file? - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:50 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! Here is what I see in the log. I send email using squirrelmail from [EMAIL PROTECTED] (on the server that has problems) to a new and working email at [EMAIL PROTECTED] (on my backup server that is working). As expected, no email is actually sent to those addresses. But if I try to send to a domain within my server [EMAIL PROTECTED], it is sent. I look at /smtp/current and it says: @400043e7193a0dff4a44 tcpserver: status: 11/100 @400043e7193a0dff61b4 tcpserver: pid 1054 from 127.0.0.1 @400043e7193a0dff6984 tcpserver: ok 1054 server9.filipinowebservices.com:127.0.0.1:25 :127.0.0.1::41336 @400043e7193a0e5015dc CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay @400043e7193a0e53a7ec CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay @400043e7193a0e56c0e4 CHKUSER relaying rcpt: from [EMAIL PROTECTED]:: remote mail.filipinowebservices.com:unknown:127.0.0.1 rcpt [EMAIL PROTECTED] : client allowed to relay @400043e7193a11f776e4 tcpserver: end 1054 status 0 Thanks for sticking with me. I still need your help On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: if you cant send an email to outside, an error will prompt out in the log /var/log/qmail/send/current or ../smtp/current - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:32 PM Subject: Re: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! I checked /var/log/qmail/send/current and I do not see any activity that says I was rejected by spamcop or the other RBLs. I am on a fixed IP address 209.11.243.202. I can send emails within my own server, with different domain names; but I cannot send outside my server. I operate a 2nd server also with qmailtoaster that still works fine. Any other ideas? On 2/6/06, Gabriel Lai Yong Shern [EMAIL PROTECTED] wrote: check /var/log/qmail/send/current If being block by RBLs List, are you using a dynamic internet connection? If yes, disconnect your Internet and reconnect, after it changes new IP, it should works well. - Original Message - From: Edwin Casimero To: qmailtoaster-list@qmailtoaster.com Sent: Monday, February 06, 2006 5:08 PM Subject: [qmailtoaster] ***SPAM*** Help! Cannot send email outside my own server! Help! I have qmailtoaster on CentOS 4.2 and it has been running fine for several months now. I host several dozen domains and emails running, All of a sudden today, I cannot send email outside my own server. I looked at the RBLs and spamcop has me blacklisted. I then removed all RBLs in my /var/qmail/control/blacklists. I did the same for a backup server that also has qmailtoaster. Now I tested my backup server and it sends and receives emails fine. But my main email server with qmailtoaster can only receive emails but cannot receive emails! My main email server cannot send to yahoo, cannot send to google, cannot send to my backup server which has RBLs removed in /var/qmail/control/blacklists. What could possibly be wrong with my qmailtoaster? How can I fix it? Which logs to check? -- http://www.filipinowebservices.com Total Web Email Retainership, Maintenance, Development, Hosting. CMS (content management systems) experts in EZ Publish for web sites with hundreds of pages. Expert LINUX Network Administrator since 1998 - for consulting, setup, internet, intranets, desktops, servers, open-source installations, BIG-BOARDS tweaking and hosting. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Domain Aliases with Qmail Toaster
Hi, I have an existing domain: abc.com But due to corporate name change, we now must use xyz.com How do I go about configuring qmailtoaster to accept email from both abc.com and xyz.com? How about sending? Can I switch over now to xyz.com? Thanks for your time. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Help! How do I stop / identify my users from sending spam?
Hello, I've just currently been blacklisted in Spamcop. I've been looking at the apache logs and I see qmail rejecting some spammer injecting a lot of aol.com addresses I do not know if that is the cause. How do I identify which of my users are sending spam? Is there a way I can stop them at the server level? My users are granted smtp access. Help? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] New Upgrade Notes for 11/23/2005 new qmailtoaster version?
I just noticed qmailtoaster has been updated 11/23/2005 The old upgrade path in the archives show that we should remove spamassassin first then -Uvh everything else. Is it the same way for the 11/23/2005 upgrade? Any feedback of success or quirks from those who have upgraded? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Backupmx mixed mode
Jake Vickers wrote: [EMAIL PROTECTED] wrote: Hi Qmail Profis ;-) i am currently in a big dilemma. That means i have a server with qmailtoaster running absolutely wonderful. For some domains this server is Primary. Now i would like to add some domains for which this server is the secondary one. (the primary one is running postfix) That's easy, too. For the Qmail server to be a backup mail exchange for a domain, you DO NOT add the domains or users to the server. All you have to do is add the domains to your rcpthosts file in /var/qmail/control and it will accept emails for those domains that you add, and then try and deliver the to the main MX record every 5 minutes. This goes hand-in-hand with the /var/qmail/control/queuelifetime file. The value in this file is the number of seconds the Qmail server will hang onto the message (trying to deliver it every 5 minutes the whole time) until it bounces it to the sender. A good value is 24 hours (86400 seconds) in my opinion. I keep mine set at that, unless there's a problem with the main mail server, in which case I log into it and change this variable to a longer time (usually 3 days) until I get the main server back up. How about setting a quota per domain we keep a backup mail exchange? Say 50mb per domain? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Qmail Toaster install on RHEL 3 ?
I've installed successfully on CentOS 4. Now I want to install on RHEL 3. Anything I should modify? Is there another install script? Which flag do I use for compiling the src rpms? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Qmail Toaster install on RHEL 3 ?
Wow, that was a fast response. Trying it now. Thanks Jake, will report to you later. Jake Vickers wrote: Edwin Casimero wrote: I've installed successfully on CentOS 4. Now I want to install on RHEL 3. Anything I should modify? Is there another install script? Which flag do I use for compiling the src rpms? Just use the flags for Redhat9 (rht90) to build them for RHEL3. Other than that, you **MAY** need to satisfy the dependencies for Redhat9, but Nick has a script on his site for that. Everything else should be good. My new script should work for that, if you use the CentOS 3.4 install (uses the rht90 flags, and satisfies the dependencies for it also) which is on my site at http://jakev.com/qmail - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Let's talk about SPF Records - How are you implementing them?
Guys, If you checkout your domains in www.dnsreport.com, you can get some important analysis. One of them is the SPF Record: Your domain does not have an SPF record. This means that spammers can easily send out E-mail that looks like it came from your domain, which can make your domain look bad (if the recipient thinks you really sent it), and can cost you money (when people complain to you, rather than the spammer). You may want to add an SPF record http://spf.pobox.com ASAP, as 01 Oct 2004 was the target date for domains to have SPF records in place (Hotmail, for example, started checking SPF records on 01 Oct 2004). http://spf.pobox.com/ - for information on SPF records. What is your SPF record implementation policy? Are your customers or domains demanding to use them? Regards to all, Edwin http://www.filipinowebservices.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Mail server host name in greeting
Guys, If you check your domain in www.dnsreport.com, you can find some useful information. One that is interesting for a newbie QmailToaster user like me is the: *** Mail server host name in greeting *** WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). This probably won't cause any harm, but is a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. mail.prolife.org.ph claims to be invalid hostname 'Welcome': 220 Welcome to Qmail Toaster Ver. 1.2 smtp Server ESMTP Question: How do I implement this on my domains under Qmail Toaster? Edwin http://www.filipinowebservices.com
[qmailtoaster] EZMLM subscription form howto / script in php or perl cgi?
Newbie question: I am so excited to have EZMLM working! I have been googling but no luck at a simple solution. Problem: I want web site visitors to subscribe by merely typing their email address and pressing submit. This should trigger an email to my mailing list [EMAIL PROTECTED] With the from email as the one submitted. So the visitor gets an email confirming his subscription. I know someone has an easy strip of simple code out there. Any suggestions? Regards, Edwin http://www.filipinowebservices.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Which Centos version
Per, What you do to save time is to immediately download and install CentOS 4.2. That way, you save on the update process to 4.2. I was successful at home with 4.2 and successful in the production email server at 4.2. Just added 50 domains. Regards, Edwin http://www.filipinowebservices.com Edwin Casimero wrote: Per, CentOS 4.2 works great with my server. I just installed it last week with Qmail Toaster. You will notice at install, I tried CentOS 4.0 and 4.1, the toaster install upgrades to 4.2 BEFORE installing the qmail components. It works. I can vouch for it. Regards, Edwin http://www.filipinowebservices.com Per Qvindesland wrote: Hello All, Sorry here is a really stupid question but I am a complete newbie to qmailtoaster so please don't chop my head off :) Is the centos 4.2 ok for qmailtoaster? Regards Per Qvindesland - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] q-trap or word based email filter for qmailtoaster?
Guys, From the www.qmailrocks.com feature list: 17. q-trap - A domain level word based e-mail filter. The last line of defense against SPAM! How can this tool be used in qmailtoaster? Is there an existing tool in place? I want to filter email with words like: The Ultimate Online Pharmaceutical - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Does Fetchmail work with Qmail? Need way to download remote mail periodically.
Does Fetchmail work with Qmail? I Need way to download remote mail periodically. Other commercial email servers call this remote pop or RPOP. Or in SquirrelMail, there is a plugin for POP Fetch. What I need is an unattended tool that remotely fetches email from the internet and dumps this email into qmail. With Fetchmail and Sendmail or Postfix, I can run this in Cron. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Backup / Restore Scripts? Methods? Techniques? for Qmail Toaster?
Newbie here, What are the Backup / Restore Scripts? Methods? Techniques? What important directories are there? For instant restore? For transferring to a new server? In case and when disaster does arrive? Hard disks fail... all the time. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Need help technique t migrate from Ensim 4 (sendmail) to Qmail Toaster
Hello, I am running Ensim 4 (sendmail) in one server. I just finished setting up qmail toaster on a new server. I have around 50 domains to transfer from Ensim 4 (sendmail) Questions: #1 - Does Qmail have a Remote POP facility aka fetchmail? #2 - Is there a utility to convert my sendmail mailboxes to qmaildirs? #3 - Any practical tips? I tried using Mozilla-Thunderbird's imap client and transferred email imap to imap but it takes sooo long. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Help me choose qmailtoaster over surgemail
Hi Nick, My first install was a bust... must have made a boo boo somewhere. I tried QmailRocks... whew, too much hard work, but I learned a lot. There has to be a better and more consistent way... QmailToaster. Again, tried installing CentOS 4.0 CDs, but the yum update takes too long on my slow DSL. And it seems the Qmail Toaster install updates CentOS to the latest 4.x version anyway! Grrr... Install CentOS 4.2 DVD. Try installing QmailToaster again... success!!! Woo hooo. Let me try this on my brand new rented Xeon server. My next move is to try to install a custom apache 2.0.xx and include the .confs generated by qmail and squirrelmail, install my preferred firewall (APF) and see that my Apache plays both squirrelmail and my EZ Publish web sites who are heavy on mod_rewrite... The trick I see from commercial packages like CommuniGate Pro and Surgemail is to run their webmail on a different port like :8100 or :7026 There will be more challenges... backup, backup, backup --- restore, restore, restore. Wish me luck... This week has been awesome. I hope to finally use qmailtoaster as my replacement for clunky old ensim 4. Hopefully, qmailtoaster will be more stable. I know it is. Thanks to all you guys. Regards, Edwin Nick Hemmesch wrote: The box i got was immediately a CentOS 4.2. What adjustments in qmailtoaster should I make to make it run on 4.2? Any updates? Jake Vickers wrote: Hi Edwin, What problems are you having with CentOS 4.2? I just did a fresh ftp install of CentOS 4.2 x86_64 and ran the '--with cnt4064' switch to build everything. I had no problems. Everything worked. Most cases of failed installs have host, SELinux, and dns issues. Regards, Nick - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]