[qmailtoaster] Re: Dspam

[Fabian Santiago]

nvm, i went through your dspam install script and found it. thanks.

On Sat, Mar 25, 2017 at 9:51 PM, Fabian A. Santiago
 wrote:
> What calls dspam? Is it still .Qmail-default?
> --
> Thanks.
> Fabian S.

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Qmt latest / cos 7 / ipv6 support

[Fabian Santiago]

ok, i seem to have it working. installed ucspi-tcp6 as per
instructions, edited the smtp & submission run scripts to use the new
tcpserver and now they're on ipv4/6.

i also re-configured my dns recursor to listen on ipv4 & 6 (unsure if
mandatory but makes sense in my mind).

thanks.


On Sat, Mar 25, 2017 at 5:29 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:
> Yes. It looked to be fairly straight forward, applying a patch and voila.
>
> Actually, looking on my backup server, I've already done this back in
> January...don't remember all the details.
>
> I save all cli history, I'll see if I can dig it up for you.
>
>
>
> On 3/25/2017 3:10 PM, Fabian Santiago wrote:
>>
>> so you're saying i only need to worry about getting Uscpi-tcp6 up &
>> running?
>>
>> On Sat, Mar 25, 2017 at 5:01 PM, Eric Broch <ebr...@whitehorsetc.com>
>> wrote:
>>>
>>> 1) Yes
>>> but
>>> 2) QMT, after patching, has all the patches of netqmail-1.06. There are
>>> some
>>> documentation differences though. Someone can correct me if I'm wrong.
>>>
>>> I was attempting this (what I think you're attempting) and was bogged
>>> down
>>> in the monolithic patch file qmailtoaster-1.2.3(?). I'm not sure I like
>>> the
>>> big patch files IMHO they're difficult to sort out.
>>> Uscpi-tcp6 does (or should not) affect QMT.
>>>
>>> So, netqmail-1.05 is qmail-1.03 with a recommended patch bundle included
>>> but
>>> unapplied (applied at make, I think). Netqmail-1.06 has the recommended
>>> patch bundle applied already and the documentation in the code indicating
>>> as
>>> much. Again, someone correct me if I'm wrong.
>>>
>>>
>>> On 3/25/2017 1:59 PM, Fabian Santiago wrote:
>>>>
>>>> ohh, that's above my pay grade. unless (maybe) you can offer me some
>>>> answers:
>>>>
>>>> 1.) current qmt is net-qmail v1.05 yes?
>>>> 2.) if i attempt to get net-qmail 1.06 and patch it, what
>>>> configuration selections are needed to match qmt's implementation /
>>>> config files / etc?
>>>> 3.) anything else i may need to know?
>>>>
>>>> Thanks.
>>>>
>>>>
>>>> On Thu, Mar 23, 2017 at 11:44 PM, Eric Broch <ebr...@whitehorsetc.com>
>>>> wrote:
>>>>>
>>>>> Hi Fabian,
>>>>>
>>>>> Have a look here ucspi-tcp6 and here.
>>>>>
>>>>> If you get it tested and implemented can you let us know how? I've been
>>>>> a
>>>>> little busy lately.
>>>>>
>>>>> Eric
>>>>>
>>>>>
>>>>> On 3/23/2017 8:45 PM, Fabian A. Santiago wrote:
>>>>>
>>>>> Where is qmt lately with ipv6 support, specifically for the SMTP side?
>>>>>
>>>>>
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>>
>>> --
>>> Eric Broch, IMSO, DAM, NGOO, DITH, URTS
>>> White Horse Technical Consulting (WHTC)
>>>
>>>
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>
> --
> Eric Broch, IMSO, DAM, NGOO, DITH, URTS
> White Horse Technical Consulting (WHTC)
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Qmt latest / cos 7 / ipv6 support

[Fabian Santiago]

so you're saying i only need to worry about getting Uscpi-tcp6 up & running?

On Sat, Mar 25, 2017 at 5:01 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:
> 1) Yes
> but
> 2) QMT, after patching, has all the patches of netqmail-1.06. There are some
> documentation differences though. Someone can correct me if I'm wrong.
>
> I was attempting this (what I think you're attempting) and was bogged down
> in the monolithic patch file qmailtoaster-1.2.3(?). I'm not sure I like the
> big patch files IMHO they're difficult to sort out.
> Uscpi-tcp6 does (or should not) affect QMT.
>
> So, netqmail-1.05 is qmail-1.03 with a recommended patch bundle included but
> unapplied (applied at make, I think). Netqmail-1.06 has the recommended
> patch bundle applied already and the documentation in the code indicating as
> much. Again, someone correct me if I'm wrong.
>
>
> On 3/25/2017 1:59 PM, Fabian Santiago wrote:
>>
>> ohh, that's above my pay grade. unless (maybe) you can offer me some
>> answers:
>>
>> 1.) current qmt is net-qmail v1.05 yes?
>> 2.) if i attempt to get net-qmail 1.06 and patch it, what
>> configuration selections are needed to match qmt's implementation /
>> config files / etc?
>> 3.) anything else i may need to know?
>>
>> Thanks.
>>
>>
>> On Thu, Mar 23, 2017 at 11:44 PM, Eric Broch <ebr...@whitehorsetc.com>
>> wrote:
>>>
>>> Hi Fabian,
>>>
>>> Have a look here ucspi-tcp6 and here.
>>>
>>> If you get it tested and implemented can you let us know how? I've been a
>>> little busy lately.
>>>
>>> Eric
>>>
>>>
>>> On 3/23/2017 8:45 PM, Fabian A. Santiago wrote:
>>>
>>> Where is qmt lately with ipv6 support, specifically for the SMTP side?
>>>
>>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>
> --
> Eric Broch, IMSO, DAM, NGOO, DITH, URTS
> White Horse Technical Consulting (WHTC)
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Qmt latest / cos 7 / ipv6 support

[Fabian Santiago]

ohh, that's above my pay grade. unless (maybe) you can offer me some answers:

1.) current qmt is net-qmail v1.05 yes?
2.) if i attempt to get net-qmail 1.06 and patch it, what
configuration selections are needed to match qmt's implementation /
config files / etc?
3.) anything else i may need to know?

Thanks.


On Thu, Mar 23, 2017 at 11:44 PM, Eric Broch  wrote:
> Hi Fabian,
>
> Have a look here ucspi-tcp6 and here.
>
> If you get it tested and implemented can you let us know how? I've been a
> little busy lately.
>
> Eric
>
>
> On 3/23/2017 8:45 PM, Fabian A. Santiago wrote:
>
> Where is qmt lately with ipv6 support, specifically for the SMTP side?
>
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] password length max?

[Fabian Santiago]

question,

interesting issue; when i create a new user, whether it be via
vadduser or in qmailadmin, i may spec a 39 character password for
example but it winds up being saved in a truncated form, down to only
the first 16 characters.

a.) is this normal
b.) why no warning from vadduser or qmailadmin?
c.) can this limit be expanded?

not that 16 chars is bad but i believe in very strong passwords.

thanks.

- Fabian S.

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Root forwarding

[Fabian Santiago]

got it. works. thanks for the tip and example.

On Fri, Mar 24, 2017 at 9:12 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:
> These are my entries:
>
> +---+--+--+
> | alias | domain   | valias_line |
> +---+--+--+
> | mailer-daemon | whitehorsetc.com | @whitehorsetc.com |
> | anonymous   | whitehorsetc.com | @whitehorsetc.com |
> | root| whitehorsetc.com | @whitehorsetc.com
> |
> +---+--+--+
>
> I use qmailadmin to add aliases (forwards) or /home/vpopmail/bin/valias
>
>
>
> On 3/24/2017 7:03 PM, Fabian Santiago wrote:
>>
>> postmas...@garden-life.org
>>
>> On Fri, Mar 24, 2017 at 8:50 PM, Eric Broch <ebr...@whitehorsetc.com>
>> wrote:
>>>
>>> Sorry, where do you want your root email to go?
>>>
>>>
>>>
>>> On 3/24/2017 6:44 PM, Fabian Santiago wrote:
>>>>
>>>> eric,
>>>>
>>>> that's likely it; i see:
>>>>
>>>> root  garden-life.org @mail.garden-life.org
>>>>
>>>> so should the domain say localhost? or both should say so? It's been a
>>>> while since i've touched qmail so i'm unsure...
>>>>
>>>> thanks.
>>>>
>>>>
>>>> On Fri, Mar 24, 2017 at 8:11 PM, Eric Broch <ebr...@whitehorsetc.com>
>>>> wrote:
>>>>>
>>>>> Also
>>>>>
>>>>> # mysql -u root -p vpopmail
>>>>>
>>>>> Enter password:
>>>>>
>>>>> mysql [vpopmail]> select * from valias;
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 3/24/2017 5:57 PM, South Computers wrote:
>>>>>>
>>>>>> Check in /var/qmail/alias/.qmail-root
>>>>>>
>>>>>>
>>>>>>
>>>>>> Fabian A. Santiago wrote:
>>>>>>>
>>>>>>> Can someone remind me where to look to discover why all system emails
>>>>>>> addressed to root are being sent to:
>>>>>>>
>>>>>>> r...@domain.tld
>>>>>>>
>>>>>>> Rather than @localhost
>>>>>>>
>>>>>>> Forcing me to create a forwarding address to send that to:
>>>>>>>
>>>>>>> r...@host.domain.tld
>>>>>>>
>>>>>>> Which is then picked up by qmail aliasing and sent to my postmaster
>>>>>>> account?
>>>>>>>
>>>>>>> Thanks.
>>>>>>
>>>>>>
>>>>>>
>>>>>> -
>>>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>>>> For additional commands, e-mail:
>>>>>> qmailtoaster-list-h...@qmailtoaster.com
>>>>>>
>>>>> -
>>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>>> For additional commands, e-mail:
>>>>> qmailtoaster-list-h...@qmailtoaster.com
>>>>>
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>>
>>>
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Root forwarding

[Fabian Santiago]

nothing changed as in this is a new box just stood up. i just don't
recall the proper settings.

On Fri, Mar 24, 2017 at 9:09 PM, South Computers
<i...@southcomputers.com> wrote:
> I also haven't had to touch mine for a long time, so would definitely stick
> to Eric's line of thought too.
>
> I did do a couple of tests, and they worked fine for me. Is your hosts file
> correct? Anything else changed that you know of?
>
>
>
>
> Fabian Santiago wrote:
>>
>> eric,
>>
>> that's likely it; i see:
>>
>> root  garden-life.org @mail.garden-life.org
>>
>> so should the domain say localhost? or both should say so? It's been a
>> while since i've touched qmail so i'm unsure...
>>
>> thanks.
>>
>>
>> On Fri, Mar 24, 2017 at 8:11 PM, Eric Broch <ebr...@whitehorsetc.com>
>> wrote:
>>>
>>> Also
>>>
>>> # mysql -u root -p vpopmail
>>>
>>> Enter password:
>>>
>>> mysql [vpopmail]> select * from valias;
>>>
>>>
>>>
>>>
>>> On 3/24/2017 5:57 PM, South Computers wrote:
>>>>
>>>> Check in /var/qmail/alias/.qmail-root
>>>>
>>>>
>>>>
>>>> Fabian A. Santiago wrote:
>>>>>
>>>>> Can someone remind me where to look to discover why all system emails
>>>>> addressed to root are being sent to:
>>>>>
>>>>> r...@domain.tld
>>>>>
>>>>> Rather than @localhost
>>>>>
>>>>> Forcing me to create a forwarding address to send that to:
>>>>>
>>>>> r...@host.domain.tld
>>>>>
>>>>> Which is then picked up by qmail aliasing and sent to my postmaster
>>>>> account?
>>>>>
>>>>> Thanks.
>>>>
>>>>
>>>>
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>>
>>>
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>>
>>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Root forwarding

[Fabian Santiago]

postmas...@garden-life.org

On Fri, Mar 24, 2017 at 8:50 PM, Eric Broch <ebr...@whitehorsetc.com> wrote:
> Sorry, where do you want your root email to go?
>
>
>
> On 3/24/2017 6:44 PM, Fabian Santiago wrote:
>>
>> eric,
>>
>> that's likely it; i see:
>>
>> root  garden-life.org @mail.garden-life.org
>>
>> so should the domain say localhost? or both should say so? It's been a
>> while since i've touched qmail so i'm unsure...
>>
>> thanks.
>>
>>
>> On Fri, Mar 24, 2017 at 8:11 PM, Eric Broch <ebr...@whitehorsetc.com>
>> wrote:
>>>
>>> Also
>>>
>>> # mysql -u root -p vpopmail
>>>
>>> Enter password:
>>>
>>> mysql [vpopmail]> select * from valias;
>>>
>>>
>>>
>>>
>>> On 3/24/2017 5:57 PM, South Computers wrote:
>>>>
>>>> Check in /var/qmail/alias/.qmail-root
>>>>
>>>>
>>>>
>>>> Fabian A. Santiago wrote:
>>>>>
>>>>> Can someone remind me where to look to discover why all system emails
>>>>> addressed to root are being sent to:
>>>>>
>>>>> r...@domain.tld
>>>>>
>>>>> Rather than @localhost
>>>>>
>>>>> Forcing me to create a forwarding address to send that to:
>>>>>
>>>>> r...@host.domain.tld
>>>>>
>>>>> Which is then picked up by qmail aliasing and sent to my postmaster
>>>>> account?
>>>>>
>>>>> Thanks.
>>>>
>>>>
>>>>
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>>
>>>
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Root forwarding

[Fabian Santiago]

if i did that south computers, how would it know to go to postmaster?

On Fri, Mar 24, 2017 at 8:13 PM, South Computers
 wrote:
> Fabian A. Santiago wrote:
>>
>> On March 24, 2017 7:57:33 PM EDT, South Computers
>>  wrote:
>>>
>>> Check in /var/qmail/alias/.qmail-root
>>>
>>>
>>>
>>> Fabian A. Santiago wrote:

 Can someone remind me where to look to discover why all system emails
>>>
>>> addressed to root are being sent to:

 r...@domain.tld

 Rather than @localhost

 Forcing me to create a forwarding address to send that to:

 r...@host.domain.tld

 Which is then picked up by qmail aliasing and sent to my postmaster
>>>
>>> account?

 Thanks.
>>>
>>>
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail:
>>> qmailtoaster-list-h...@qmailtoaster.com
>>
>> I did that. It's set to:
>>
>> 
>>
>> Somewhere else the root address is being translated to my domain name
>> rather than localhost.
>>
>>
> Not sure off the top of my head then. Have you tried putting root@localhost
> or root@127.0.0.1 in the alias file instead to see what happens? Might loop,
> but worth a shot.
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] RE: Shubes

[Fabian Santiago]

That's wild. I also ventured over to another mailing list for an organization 
he's been involved in, main plug. They claim he should be just fine and well 
and someone claimed to have just recently spoken to him or to have seen a post 
from him somewhere online about a month ago. I could find no evidence of that 
and he never chimed into the list discussion as others thought he might. Just 
my 2 cents. 

--

Fabe


> On Sep 17, 2015, at 4:36 PM, Dan McAllister  wrote:
> 
> NOTE: I have not only sent emails, but I have also called on the telephone to 
> speak to Eric -- all to no avail. 
> 
> As hesitant as I am to "steal" a project from anyone, I am prepared to move 
> on redirecting the DNS to other servers that can be more actively maintained. 
> (Remember, I have control of the DNS servers -- at least as defined at the 
> registrar. So, so long as the entries at the registrar still point to my 
> servers, we have significant control over the domain).
> 
> However, I think a more appropriate location to hold this discussion would be 
> the qmailtoaster-devel list (which I have copied).
> 
> If you are on the qmailtoaster-devel mail list, please continue the 
> discussion there.
> 
> Thanks
> 
> Dan McAllister
> IT4SOHO
> QMT DNS/Mirror Admin
> 
> 
> 
> 
>> On 9/17/2015 10:23 AM, Edwin C wrote:
>> In the spirit of volunteering, i can provide a vps to the community.  I have 
>> hosting skills.
>> 
>> I also do wordpress websites via my company www.filipinowebservices.com
>> 
>> Let me know how i can help.
>> 
>> On Sep 17, 2015 13:32, "L.A."  wrote:
>> Same here.
>> Making copy of centos6 for local use now :(
>>  
>> Looks like we need at least two leaders with all access, that will not 
>> disappear simultaneously.
>>  
>>  
>> 10.09.2015, 01:32, "Havrla" :
>>> Hello
>>> 
>>> I'm sorry my English is not good.
>>> 
>>> I have QMT since 2003, actually 2015 - 2003 = 12 years. That's a long time.
>>> 
>>> I would be very unhappy if the project did not continue
>>> 
>>> Website of the project seem dead. the only living thing is email-list. I 
>>> was so unhappy after new information on the continuation and CentOS7, so I 
>>> volunteered email-list. Information gained and QMT on CentOS7 comfortably 
>>> installed, without compiling, without complications. I configured a 
>>> přemigroval old QMT. It works. I'm happy.
>>> Plenty of other administrators would be happy if the project and website 
>>> relaunched and updated.
>>> 
>>> I can provide mirror web hosting for the web. I fear the end of QMT several 
>>> years, so I have a backup 
>>> http://www.lhotkanet.cz/mirror/www.qmailtoaster.com/
>>> 
>>> Good luck finding Eric "Shubes", please choose a successor to continue the 
>>> project. I do not end up project.
>>> 
>>> History "authors" from website QMT:
>>> 2003 - first Miguel Beccari  - web live
>>> 2004 - Miguel Beccari and Nick Hemmesch  - web live
>>> 2005 - Nick Hemmesch - web live
>>> 2006 - Nick Hemmesch - web live
>>> 2007 - Nick Hemmesch - web live
>>> 2008 - Erik A. Espinoza - web live
>>> 2009 - xxx  - no info
>>> 2010 - Jake Vickers - web live
>>> 2011 - Jake Vickers - web live
>>> 2012 - Jake Vickers  - web last update 09/18/2012 - Updated clamav to 0.97.6
>>> 2013 - Jake Vickers  - web frozen
>>> 2014 - Jake Vickers - web frozen
>>> 2015 - Jake Vickers - web frozen
>>> 2016 -> ??? Eric Broch & Dan McAllister ???  web live ??   please please 
>>> 
>>> 
>>> 
>>> Thanks
>>> Havrla from Czech Republic
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Dne 9.9.2015 19:04, South Computers napsal(a):
 Thanks Dan! I will help in any way I can as well, just say the word. 
 
 Shubes, hope all is well with you. 
 
 Scott 
 
 Dan McAllister wrote: 
> QM Toaster Minions: 
> 
> I have tried contacting "Shubes" several times over the past few months, 
> to no avail. He's either busy or incapacitated. It has been since before 
> the new year that he was last heard from here, or privately. 
> 
> I have control of the DNS, so if we want to move anything we can -- we 
> just can't make any actual changes to the domain registration. The domain 
> registration was renewed this past May, but I strongly 
> suspect that was an automated transaction. I am already listed on the 
> registration as the Tech ID, so if Eric is incapacitated we should be 
> able to convince DynDNS (the registrar) to let us in -- but other than 
> renewing it, there really doesn't need to be anything changed there. 
> 
> There are likely also "accounts" (git?) that may need to be "recovered". 
> 
> Never the less, it is time to regain some direction and progress ... so, 
> I will try again to reach Eric. I am not comfortable just "taking" the 
> project from him, but agree that there are many changes and updates that 
> need to be incorporated. (Not the least of which is both 

Re: [qmailtoaster] The mail server responded this user has no $HOME/Maildir

[Fabian Santiago]

Permissions of your /home/vpopmail/domains/... folders perhaps?

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 29, 2015, at 8:32 PM, Tony White aewhite...@yahoo.com.au wrote:
 
 Update : maunal access tried...
 
 +OK 20725.1432945684@/home/vpopmail/bin/vchkpw
 user t...@example.com
 +OK
 pass letmeinplease
 -ERR this user has no $HOME/Maildir
 -ERR unable to write pipe
 
 
 From: Tony White aewhite...@yahoo.com.au
 To: qmailtoaster-list@qmailtoaster.com qmailtoaster-list@qmailtoaster.com 
 Sent: Saturday, 30 May 2015, 10:26
 Subject: [qmailtoaster] The mail server responded this user has no 
 $HOME/Maildir
 
 Hi folks,
   I have no idea what this is but noone can get email.
 Trying to retrieve mail generates the error...
 
 Sending of password for u...@example.com did not succeed.
 Mail server ServerName responded: this user has no $HOME/Maildir
 
 Anyone any ideas please? I will keep searching the net meanwhile.
 
 TIA.
 
 tony
 
 

Re: [qmailtoaster] Upgrading mailman

[Fabian Santiago]

Well,

I compiled from source v2.1.20 and it seems to be working fine as an
upgrade to the QT iteration of 2.1.12. Does anyone know of any issues
I may encounter with Qmail?

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 5, 2015, at 9:47 PM, Fabian Santiago fsanti...@deviltracks.net wrote:

 If I upgrade mailman beyond what's in the repo(s), for cos 6.6, will that 
 wreck the Qmail integration at all?

 -

 Sincerely,

 Fabian Santiago

 Sent from my iPhone
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Upgrading mailman

[Fabian Santiago]

If I upgrade mailman beyond what's in the repo(s), for cos 6.6, will that wreck 
the Qmail integration at all? 

-

Sincerely,

Fabian Santiago

Sent from my iPhone
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Thanks. It's up  running. 

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 3, 2015, at 5:34 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Hey Fabian,
 
 The new SA is up @
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/spamassassin-3.4.1-0.qt.el6.x86_64.rpm
 
 The config files will be back in /etc/spamassassin and
 /etc/cron.daily/sa-update will be as it should be.
 
 What I did on my COS6.6 is Remove SA, reverted to old SA, and upgraded
 to latest SA below:
 
 # rpm -e --nodeps spamassassin
 # rpm -Uvh
 http://mirrors.qmailtoaster.com/current/CentOS/6/x86_64/spamassassin-3.4.0-2.qt.el6.x86_64.rpm
 # rpm -Uvh
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/spamassassin-3.4.1-0.qt.el6.x86_64.rpm
 
 I suppose you could skip step 2, but I did it just to be safe FWIW.
 
 EricB.
 
 
 On 5/3/2015 2:07 PM, Fabian Santiago wrote:
 No worries. Thank you! Keep me posted. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 3, 2015, at 4:05 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 I've discovered that I did not base my
 spamassassin-3.4.1-1.qt.el6.x86_64.rpm off of EricS's
 spamassassin-3.4.0-2.qt.el6.x86_64.rpm which up until now I was unaware
 of, therefore, mine did not incorporate all of his changes for CentOS 6
 
 I apologize for the problems and will correct this error and put the
 updated RPM and SRPM on my ftp site ASAP. I think that this was the
 source of all of the problems you experienced after you installed my
 rpm. Again, I apologize.
 
 EricB
 
 
 
 
 On 5/3/2015 12:54 PM, Eric Broch wrote:
 Sorry, I should have looked at the email more closely.
 My mistake, I'll re-roll the rpm with the correct cron sa-update.
 Thanks for catching this, Fabian.
 
 EricB
 
 
 
 On 5/3/2015 11:54 AM, Fox Hound wrote:
 Contents of sa-update cron script:
 
 
 #!/bin/bash
 
 # Only restart spamd if sa-update returns 0, meaning it updated the rules
 
 /usr/bin/sa-update | logger -i -p mail.info
 
 if [ ${PIPESTATUS[0]} != 0 ]; then
 exit ${PIPESTATUS[0]}
 fi
 
 svc -d /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -t /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -u /var/qmail/supervise/spamd | logger -i -p mail.info
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Eric,

Yes I do but actually it's stored under the user profile sa runs as, so in my 
case:

/home/vpopmail/.spamassassin

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 3, 2015, at 8:01 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 Question: Do you run Spamassassin bayes filtering on your COS 6.6 machine?
 
 If so, I'm assuming that the bayes data base would be in
 /etc/spamassassin/.spamassassin rather than
 /etc/mail/spamassassin/.spamassassin as it is on COS 5, correct?
 
 Eric
 
 
 On 5/3/2015 5:34 PM, Fabian Santiago wrote:
 Thanks. It's up  running. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 3, 2015, at 5:34 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Hey Fabian,
 
 The new SA is up @
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/spamassassin-3.4.1-0.qt.el6.x86_64.rpm
 
 The config files will be back in /etc/spamassassin and
 /etc/cron.daily/sa-update will be as it should be.
 
 What I did on my COS6.6 is Remove SA, reverted to old SA, and upgraded
 to latest SA below:
 
 # rpm -e --nodeps spamassassin
 # rpm -Uvh
 http://mirrors.qmailtoaster.com/current/CentOS/6/x86_64/spamassassin-3.4.0-2.qt.el6.x86_64.rpm
 # rpm -Uvh
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/spamassassin-3.4.1-0.qt.el6.x86_64.rpm
 
 I suppose you could skip step 2, but I did it just to be safe FWIW.
 
 EricB.
 
 
 On 5/3/2015 2:07 PM, Fabian Santiago wrote:
 No worries. Thank you! Keep me posted. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 3, 2015, at 4:05 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 I've discovered that I did not base my
 spamassassin-3.4.1-1.qt.el6.x86_64.rpm off of EricS's
 spamassassin-3.4.0-2.qt.el6.x86_64.rpm which up until now I was unaware
 of, therefore, mine did not incorporate all of his changes for CentOS 6
 
 I apologize for the problems and will correct this error and put the
 updated RPM and SRPM on my ftp site ASAP. I think that this was the
 source of all of the problems you experienced after you installed my
 rpm. Again, I apologize.
 
 EricB
 
 
 
 
 On 5/3/2015 12:54 PM, Eric Broch wrote:
 Sorry, I should have looked at the email more closely.
 My mistake, I'll re-roll the rpm with the correct cron sa-update.
 Thanks for catching this, Fabian.
 
 EricB
 
 
 
 On 5/3/2015 11:54 AM, Fox Hound wrote:
 Contents of sa-update cron script:
 
 
 #!/bin/bash
 
 # Only restart spamd if sa-update returns 0, meaning it updated the 
 rules
 
 /usr/bin/sa-update | logger -i -p mail.info
 
 if [ ${PIPESTATUS[0]} != 0 ]; then
 exit ${PIPESTATUS[0]}
 fi
 
 svc -d /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -t /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -u /var/qmail/supervise/spamd | logger -i -p mail.info
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

So I just restored the original sa-update script from the qmt github, 
specifically the conditional service restart section. 

if [ ${PIPESTATUS[0]} == 0 ] \
  || [ $1 == -r ]; then
  /sbin/service spamd condrestart /dev/null 21
else
  exit ${PIPESTATUS[0]}
fi

That should do it right? 

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 3, 2015, at 9:22 AM, Fabian Santiago fsanti...@deviltracks.net wrote:
 
 Hello Eric,
 
 Sa-update cron job error:
 
 /etc/cron.daily/sa-update:
 
 svc: warning: unable to chdir to /var/qmail/supervise/spamd: file does not 
 exist
 svc: warning: unable to chdir to /var/qmail/supervise/spamd: file does not 
 exist
 svc: warning: unable to chdir to /var/qmail/supervise/spamd: file does not 
 exist
 
 
 Contents of sa-update cron script:
 
 
 #!/bin/bash
 
 # Only restart spamd if sa-update returns 0, meaning it updated the rules
 
 /usr/bin/sa-update | logger -i -p mail.info
 
 if [ ${PIPESTATUS[0]} != 0 ]; then
   exit ${PIPESTATUS[0]}
 fi
 
 svc -d /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -t /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -u /var/qmail/supervise/spamd | logger -i -p mail.info
 
 
 What I notice is spamd doesn't exist under qmail/supervise. 
 
 On my cos6.6 system it runs as its own standard daemon started by its init 
 script under /etc/init.d.
 
 So the likely changes needed here are, as I would imagine:
 
 Something alone the lines of changing the svc lines to either point to other 
 binaries/scripts or something like service spamd command, ??
 
 What was the original sa-update cron script?
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 4:54 PM, Fabian Santiago fsanti...@deviltracks.net 
 wrote:
 
 Ok, that has been my observation. Thanks. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 3:22 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 According to the simscan wiki...
 spam_hits=number
 The spam_hits option changes the threshold spamassassin spam value. If a 
 mail gets a spam score that number or above, it is rejected, otherwise it 
 is accepted.
 http://www.qmailwiki.org/Simscan/Guide#regex_matching
 
 In other words (I think), if an email scores over 'spam_hits' it will be 
 rejected and won't go to a mailbox.
 
 EricB
 
 On 5/2/2015 9:48 AM, Fabian Santiago wrote:
 Yes it does. I was just able to test it. Thanks. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 1:38 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 I think it should, though, I'm no expert. Maybe someone else can chime
 in...anyone?
 
 On 5/1/2015 11:16 PM, Fabian Santiago wrote:
 Nvm, You helped me find it. You pointed me to the actual config file 
 where as I was looking at a file under /etc/spamassassin, which 
 contains my prior file renamed. 
 
 Once I edited the actual file all is as expected. Under 
 /etc/mail/spamassassin. 
 
 Question, can/will sa actually rewrite the header with ***spam*** 
 pre-pended if over the sa defined score limit but below simscans 
 defined spam_hits limit?
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 12:20 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian
 
 And, I might add that the error running I got when initially running
 'spamassassin -D --lint' was that it could not find the configuration 
 file
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Hello Eric,

Sa-update cron job error:

/etc/cron.daily/sa-update:

svc: warning: unable to chdir to /var/qmail/supervise/spamd: file does not exist
svc: warning: unable to chdir to /var/qmail/supervise/spamd: file does not exist
svc: warning: unable to chdir to /var/qmail/supervise/spamd: file does not exist


Contents of sa-update cron script:


#!/bin/bash

# Only restart spamd if sa-update returns 0, meaning it updated the rules

/usr/bin/sa-update | logger -i -p mail.info

if [ ${PIPESTATUS[0]} != 0 ]; then
  exit ${PIPESTATUS[0]}
fi

svc -d /var/qmail/supervise/spamd | logger -i -p mail.info
svc -t /var/qmail/supervise/spamd | logger -i -p mail.info
svc -u /var/qmail/supervise/spamd | logger -i -p mail.info


What I notice is spamd doesn't exist under qmail/supervise. 

On my cos6.6 system it runs as its own standard daemon started by its init 
script under /etc/init.d.

So the likely changes needed here are, as I would imagine:

Something alone the lines of changing the svc lines to either point to other 
binaries/scripts or something like service spamd command, ??

What was the original sa-update cron script?

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 2, 2015, at 4:54 PM, Fabian Santiago fsanti...@deviltracks.net wrote:
 
 Ok, that has been my observation. Thanks. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 3:22 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 According to the simscan wiki...
 spam_hits=number
 The spam_hits option changes the threshold spamassassin spam value. If a 
 mail gets a spam score that number or above, it is rejected, otherwise it is 
 accepted.
 http://www.qmailwiki.org/Simscan/Guide#regex_matching
 
 In other words (I think), if an email scores over 'spam_hits' it will be 
 rejected and won't go to a mailbox.
 
 EricB
 
 On 5/2/2015 9:48 AM, Fabian Santiago wrote:
 Yes it does. I was just able to test it. Thanks. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 1:38 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 I think it should, though, I'm no expert. Maybe someone else can chime
 in...anyone?
 
 On 5/1/2015 11:16 PM, Fabian Santiago wrote:
 Nvm, You helped me find it. You pointed me to the actual config file 
 where as I was looking at a file under /etc/spamassassin, which contains 
 my prior file renamed. 
 
 Once I edited the actual file all is as expected. Under 
 /etc/mail/spamassassin. 
 
 Question, can/will sa actually rewrite the header with ***spam*** 
 pre-pended if over the sa defined score limit but below simscans defined 
 spam_hits limit?
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 12:20 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian
 
 And, I might add that the error running I got when initially running
 'spamassassin -D --lint' was that it could not find the configuration 
 file
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

No worries. Thank you! Keep me posted. 

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 3, 2015, at 4:05 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 I've discovered that I did not base my
 spamassassin-3.4.1-1.qt.el6.x86_64.rpm off of EricS's
 spamassassin-3.4.0-2.qt.el6.x86_64.rpm which up until now I was unaware
 of, therefore, mine did not incorporate all of his changes for CentOS 6
 
 I apologize for the problems and will correct this error and put the
 updated RPM and SRPM on my ftp site ASAP. I think that this was the
 source of all of the problems you experienced after you installed my
 rpm. Again, I apologize.
 
 EricB
 
 
 
 
 On 5/3/2015 12:54 PM, Eric Broch wrote:
 Sorry, I should have looked at the email more closely.
 My mistake, I'll re-roll the rpm with the correct cron sa-update.
 Thanks for catching this, Fabian.
 
 EricB
 
 
 
 On 5/3/2015 11:54 AM, Fox Hound wrote:
 Contents of sa-update cron script:
 
 
 #!/bin/bash
 
 # Only restart spamd if sa-update returns 0, meaning it updated the rules
 
 /usr/bin/sa-update | logger -i -p mail.info
 
 if [ ${PIPESTATUS[0]} != 0 ]; then
  exit ${PIPESTATUS[0]}
 fi
 
 svc -d /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -t /var/qmail/supervise/spamd | logger -i -p mail.info
 svc -u /var/qmail/supervise/spamd | logger -i -p mail.info
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Yes it does. I was just able to test it. Thanks. 

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 2, 2015, at 1:38 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 I think it should, though, I'm no expert. Maybe someone else can chime
 in...anyone?
 
 On 5/1/2015 11:16 PM, Fabian Santiago wrote:
 Nvm, You helped me find it. You pointed me to the actual config file where 
 as I was looking at a file under /etc/spamassassin, which contains my prior 
 file renamed. 
 
 Once I edited the actual file all is as expected. Under 
 /etc/mail/spamassassin. 
 
 Question, can/will sa actually rewrite the header with ***spam*** pre-pended 
 if over the sa defined score limit but below simscans defined spam_hits 
 limit?
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 12:20 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian
 
 And, I might add that the error running I got when initially running
 'spamassassin -D --lint' was that it could not find the configuration file
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Ok, that has been my observation. Thanks. 

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 2, 2015, at 3:22 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian,
 
 According to the simscan wiki...
 spam_hits=number
 The spam_hits option changes the threshold spamassassin spam value. If a mail 
 gets a spam score that number or above, it is rejected, otherwise it is 
 accepted.
 http://www.qmailwiki.org/Simscan/Guide#regex_matching
 
 In other words (I think), if an email scores over 'spam_hits' it will be 
 rejected and won't go to a mailbox.
 
 EricB
 
 On 5/2/2015 9:48 AM, Fabian Santiago wrote:
 Yes it does. I was just able to test it. Thanks. 
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 1:38 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 I think it should, though, I'm no expert. Maybe someone else can chime
 in...anyone?
 
 On 5/1/2015 11:16 PM, Fabian Santiago wrote:
 Nvm, You helped me find it. You pointed me to the actual config file 
 where as I was looking at a file under /etc/spamassassin, which contains 
 my prior file renamed. 
 
 Once I edited the actual file all is as expected. Under 
 /etc/mail/spamassassin. 
 
 Question, can/will sa actually rewrite the header with ***spam*** 
 pre-pended if over the sa defined score limit but below simscans defined 
 spam_hits limit?
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 2, 2015, at 12:20 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian
 
 And, I might add that the error running I got when initially running
 'spamassassin -D --lint' was that it could not find the configuration file
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Updated;

Cos 6.6

Updating renamed my local.cf to .rpmsave.

Now where do I set the required spam score? I renamed the file back to .cf but 
that didn't make a difference. 

???

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 1, 2015, at 10:08 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Hello list,
 
 I have the most recent ClamAV and Spamassassin source and binary
 (x86_64) rpms (with build text) available for testing on my ftp site.
 
 COS 5:
 (binary)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/rpms/x86_64/clamav-toaster-0.98.7-1.4.11.x86_64.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/rpms/x86_64/spamassassin-toaster-3.4.1-1.4.5.x86_64.rpm
 (source)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/srpms/clamav-toaster-0.98.7-1.4.11.src.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/srpms/spamassassin-toaster-3.4.1-1.4.5.src.rpm
 
 
 COS 6:
 (binary)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/clamav-0.98.7-0.qt.el6.x86_64.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/spamassassin-3.4.1-1.qt.el6.x86_64.rpm
 (source)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/srpms/clamav-0.98.7-0.qt.src.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/srpms/spamassassin-3.4.1-1.qt.src.rpm
 
 COS 7:
 Coming soon
 
 Eric
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] ClamAV, Spamassassin

[Fabian Santiago]

Nvm, You helped me find it. You pointed me to the actual config file where as I 
was looking at a file under /etc/spamassassin, which contains my prior file 
renamed. 

Once I edited the actual file all is as expected. Under /etc/mail/spamassassin. 

Question, can/will sa actually rewrite the header with ***spam*** pre-pended if 
over the sa defined score limit but below simscans defined spam_hits limit?

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On May 2, 2015, at 12:20 AM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Fabian
 
 And, I might add that the error running I got when initially running
 'spamassassin -D --lint' was that it could not find the configuration file.
 
 EricB
 
 On 5/1/2015 10:10 PM, Eric Broch wrote:
 Hmmm...
 
 That's very odd! Here's my install on COS 6.6
 
 [root@pet105 SRPMS]# rpm -qa | grep spamassassin
 spamassassin-3.4.0-3.qt.el6.x86_64
 [root@pet105 x86_64]# rpm -Uvh spamassassin-3.4.1-1.qt.el6.x86_64.rpm
 Preparing...###
 [100%]
   1:spamassassin   ###
 [100%]
 [root@pet105 x86_64]# ls -l /etc/mail/spamassassin
 total 36
 -rw-r--r-- 1 root root  637 Jan 12 18:08 local.cf
 drwx-- 2 root root 4096 Apr 23 03:26 sa-update-keys
 -rw-r--r-- 1 root root 2398 Jan 10 19:45 v310.pre
 -rw-r--r-- 1 root root 1194 May  1 19:57 v312.pre
 -rw-r--r-- 1 root root 2416 May  1 19:57 v320.pre
 -rw-r--r-- 1 root root 1237 May  1 19:57 v330.pre
 -rw-r--r-- 1 root root 1020 May  1 19:57 v340.pre
 -rw-r--r-- 1 root root 1309 May  1 19:57 v341.pre
 -rw-r--r-- 1 root root  525 Apr 13 10:24 whitelist.cf
 [root@pet105 x86_64]# rpm -qa | grep spamassassin
 spamassassin-3.4.1-1.qt.el6.x86_64
 
 It did not rename local.cf on my system, However, doing 'spamassassin -D
 --lint' returned error indicating that I must run 'sa-update'. I ran
 'sa-update' and the 'lint' succeeded on next run. Keep me posted.
 
 Eric
 
 
 On 5/1/2015 9:23 PM, Fabian Santiago wrote:
 Updated;
 
 Cos 6.6
 
 Updating renamed my local.cf to .rpmsave.
 
 Now where do I set the required spam score? I renamed the file back to .cf 
 but that didn't make a difference. 
 
 ???
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On May 1, 2015, at 10:08 PM, Eric Broch ebr...@whitehorsetc.com wrote:
 
 Hello list,
 
 I have the most recent ClamAV and Spamassassin source and binary
 (x86_64) rpms (with build text) available for testing on my ftp site.
 
 COS 5:
 (binary)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/rpms/x86_64/clamav-toaster-0.98.7-1.4.11.x86_64.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/rpms/x86_64/spamassassin-toaster-3.4.1-1.4.5.x86_64.rpm
 (source)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/srpms/clamav-toaster-0.98.7-1.4.11.src.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS5/qmt/srpms/spamassassin-toaster-3.4.1-1.4.5.src.rpm
 
 
 COS 6:
 (binary)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/clamav-0.98.7-0.qt.el6.x86_64.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/rpms/x86_64/spamassassin-3.4.1-1.qt.el6.x86_64.rpm
 (source)
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/srpms/clamav-0.98.7-0.qt.src.rpm
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS6/qmt/srpms/spamassassin-3.4.1-1.qt.src.rpm
 
 COS 7:
 Coming soon
 
 Eric
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] CNAME lookup failed temporarily. (#4.4.3)

[Fabian Santiago]

Maybe related to this:

http://serverfault.com/questions/189366/cname-lookup-failed-temporarily-4-4-3

???

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Apr 30, 2015, at 3:52 AM, Tony White t...@ycs.com.au wrote:
 
 CNAME lookup failed temporarily. (#4.4.3)

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] spf

[Fabian Santiago]

Dave,

I use this:
v=spf1 mx a ip4:your server's ip -all

An SPF record generator site:
http://www.spfwizard.info

SPF explanation:
http://www.openspf.org/SPF_Record_Syntax


-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Apr 28, 2015, at 4:25 PM, Dave M sysad...@tricubemedia.com wrote:
 
 Is this good enopugh for  SPF record,
 
 v=spf1 mx -all
 
 
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] rbl

[Fabian Santiago]

Dave,

So you mean when you send email to yourself at your server from another 
external account it comes back to your external account? What does it say? Can 
you post a sample of what you get in return? I will try loading up a centos 7 
server to see what I see. Thanks. 

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Apr 26, 2015, at 12:12 PM, Dave M sysad...@tricubemedia.com wrote:
 
 more info,
 This is happening when sending from a remote address ( gmail , hotmail etc. ) 
 any address not on this server
 
 Dave M
 
 
 On 26/04/2015 9:01 AM, Dave M wrote:
 so new server online,
 sending first legit email we now get
 
 mail for ( my external ip) :25 loops back to myself
 
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] rbl

[Fabian Santiago]

Me file?

Hosts file?

Servers host name config? 

Virtual domains file? 

Etc...

-

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Apr 26, 2015, at 6:14 PM, Madd Macc dmacd6...@gmail.com wrote:
 
 the mx and dns never changed, I have multiple domains ( 21 ), and hundreds of 
 email address`s in here,
 
 
 On Sun, Apr 26, 2015 at 12:01 PM, South Computers i...@southcomputers.com 
 wrote:
 Are you sure your MX records are correct in DNS?
 
 
 Dave M wrote:
 Sending from my Hotmail or a gmail account to an account on the new server, 
 it get returned immediately with:
 
 mail for ( my external ip) :25 loops back to myself
 
 Dave M
 
 
 On 26/04/2015 9:51 AM, Fabian Santiago wrote:
 Dave,
 
 So you mean when you send email to yourself at your server from another 
 external account it comes back to your external account? What does it say? 
 Can you post a sample of what you get in return? I will try loading up a 
 centos 7 server to see what I see. Thanks.
 
 -
 
 Sincerely,
 
 Fabian Santiago
 
 Sent from my iPhone
 
 On Apr 26, 2015, at 12:12 PM, Dave M sysad...@tricubemedia.com wrote:
 
 more info,
 This is happening when sending from a remote address ( gmail , hotmail 
 etc. ) any address not on this server
 
 Dave M
 
 
 On 26/04/2015 9:01 AM, Dave M wrote:
 so new server online,
 sending first legit email we now get
 
 mail for ( my external ip) :25 loops back to myself
 
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

Re: [qmailtoaster] mrtg

[Fabian Santiago]

Hello,

I believe i just figured this one out. the existing graph types anyway now
work. not sure if I should be creating new ones yet (experimenting with
submission and getting the spam/clam stats to read right) but otherwise it
works.

If you look in /usr/share/toaster/mrtg/qmailmrtg.cfg, you'll see these
lines:

Target[messages]: \`/usr/bin/qmailmrtg m /var/log/qmail/send\`

in each section. simply remove the back slashes from the beginning and end
of the command line, to appear as this:

Target[messages]: `/usr/bin/qmailmrtg m /var/log/qmail/send`

and suddenly my stats started updating and no more errors when i manually
run the cron job.

- Fabian S.

P.S. anyone look at Dovecot graphing? or the proper method for graphing
submission? Right now i copied the smtp section and changed the labels /
logs directory. not sure if that's accurate.

and clam/spam logs appear in maillog. qmailmrtg is likely looking for
standalone logs for those components i presume correct? in case it can
actually read / parse maillog, i set those log dirs simply to /var/log. no
errors but not sure yet if it is graphing it correctly.


On Mon, Apr 20, 2015 at 2:28 PM, Fabian Santiago fsanti...@garden-life.org
wrote:

 I have seen this on my qmt as well but no fix yet that i can figure out.

 On Fri, Jan 30, 2015 at 10:23 AM, Eric Broch ebr...@whitehorsetc.com
 wrote:

 Qmail list,

 Has anyone on the list seen any and error on their toaster from mrtg like
 the following:

 error
 Friday, 30 January 2015 at 8:05: WARNING: Could not get any data from
 external command '/usr/bin/qmailmrtg t /var/log/qmail/smtp'
 Maybe the external command did not even start. (Illegal seek)

 Friday, 30 January 2015 at 8:05: WARNING: Problem with External get
 '/usr/bin/qmailmrtg t /var/log/qmail/smtp':
Expected a Number for 'in' but nothing'

 Friday, 30 January 2015 at 8:05: WARNING: Problem with External get
 '/usr/bin/qmailmrtg t /var/log/qmail/smtp':
Expected a Number for 'out' but nothing'

 Friday, 30 January 2015 at 8:05: ERROR: Target[smtp][_IN_] '
 $target-[7]{$mode} ' did not eval into defined data
 Friday, 30 January 2015 at 8:05: ERROR: Target[smtp][_OUT_] '
 $target-[7]{$mode} ' did not eval into defined data
 /error

 EricB


 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] mrtg

[Fabian Santiago]

I have seen this on my qmt as well but no fix yet that i can figure out.

On Fri, Jan 30, 2015 at 10:23 AM, Eric Broch ebr...@whitehorsetc.com
wrote:

 Qmail list,

 Has anyone on the list seen any and error on their toaster from mrtg like
 the following:

 error
 Friday, 30 January 2015 at 8:05: WARNING: Could not get any data from
 external command '/usr/bin/qmailmrtg t /var/log/qmail/smtp'
 Maybe the external command did not even start. (Illegal seek)

 Friday, 30 January 2015 at 8:05: WARNING: Problem with External get
 '/usr/bin/qmailmrtg t /var/log/qmail/smtp':
Expected a Number for 'in' but nothing'

 Friday, 30 January 2015 at 8:05: WARNING: Problem with External get
 '/usr/bin/qmailmrtg t /var/log/qmail/smtp':
Expected a Number for 'out' but nothing'

 Friday, 30 January 2015 at 8:05: ERROR: Target[smtp][_IN_] '
 $target-[7]{$mode} ' did not eval into defined data
 Friday, 30 January 2015 at 8:05: ERROR: Target[smtp][_OUT_] '
 $target-[7]{$mode} ' did not eval into defined data
 /error

 EricB


 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Fwd: ezmlm warning

[Fabian Santiago]

Strangemy email is through google apps. I know they're stringent
with their Dmarc policy (I never see my post reflections). Related
somehow you think?

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Apr 12, 2015, at 8:03 PM, Angus McIntyre an...@pobox.com wrote:

 I received one of those a few days ago.

 I did some digging and figured out what was happening.

   1. Someone posted to the qmailtoaster list from a host that is currently 
 listed in an RBL.
   2. Spamdyke on my server checked their IP against the RBL and rejected the 
 message(s).
   3. The qmailtoaster ezmlm server received the bounce(s) and noted that my 
 server was bouncing mail.
   4. After a set number of bounces, it sent me the same warning that you've 
 all received.

 Basically, if you get one, it means that (a) your qmailtoaster setup is 
 behaving as it should, and (b) the qmailtoaster ezmlm software is behaving as 
 it should. But the end result is these warning messages.

 What I can't now remember was whose IP was blacklisted. It might have been 
 Fabian's (74.125.129.26), but that IP seems to be clear now, so it was 
 probably a transient issue.

 Angus


 On 2015-04-12 18:46, Eric Broch wrote:
 I wonder why we would be receiving these? Does anyone know?
 And, who's running the qmailtoaster mail server?
 On 4/12/2015 4:42 PM, Fabian Santiago wrote:
 I received this:
 Hi! This is the ezmlm program. I'm managing the
 qmailtoaster-list@qmailtoaster.com mailing list.
 I'm working for my owner, who can be reached
 at qmailtoaster-list-ow...@qmailtoaster.com.
 Messages to you from the qmailtoaster-list mailing list seem to
 have been bouncing. I've attached a copy of the first bounce
 message I received.
 If this message bounces too, I will send you a probe. If the probe
 bounces,
 I will remove your address from the qmailtoaster-list mailing list,
 without further notice.
 I've kept a list of which messages from the qmailtoaster-list
 mailing list have
 bounced from your address.
 Copies of these messages may be in the archive.
 To retrieve a set of messages 123-145 (a maximum of 100 per
 request),
 send an empty message to:
 qmailtoaster-list-get.123_...@qmailtoaster.com
 To receive a subject and author list for the last 100 or so
 messages,
 send an empty message to:
 qmailtoaster-list-in...@qmailtoaster.com
 Here are the message numbers:
 17822
 --- Enclosed is a copy of the bounce message I received.
 Return-Path: 
 Received: (qmail 5440 invoked for bounce); 1 Apr 2015 01:04:06
 -
 Date: 1 Apr 2015 01:04:06 -
 From: mailer-dae...@mail.qmailtoaster.com
 To: qmailtoaster-list-return-178...@qmailtoaster.com
 Subject: failure notice
 Hi. This is the qmail-send program at mail.qmailtoaster.com [4].
 I'm afraid I wasn't able to deliver your message to the following
 addresses.
 This is a permanent error; I've given up. Sorry it didn't work out.
 fsanti...@garden-life.org:
 User and password not set, continuing without authentication.
 fsanti...@garden-life.org 74.125.129.26 failed after I sent the
 message.
 Remote host said: 552-5.7.0 This message was blocked because its
 content presents a potential
 552-5.7.0 security issue. Please visit
 552-5.7.0 http://support.google.com/mail/bin/answer.py?answer=6590
 [5] to review our
 552 5.7.0 message content and attachment content guidelines.
 k6si19967000pdm.248 - gsmtp
 Sincerely,
 Fabian Santiago
 Sent from my iPhone
 On Apr 12, 2015, at 6:39 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:
 Has anyone on the list received one of these?
  Forwarded Message 
 RETURN-PATH:
 qmailtoaster-list-return-warn-1428877952.nbpofmengabfjhfjnpna-ebroch=whitehorsetc@qmailtoaster.com
 DELIVERED-TO:
 whitehorsetc.com-ebr...@whitehorsetc.com
 RECEIVED:
 (qmail 15878 invoked by uid 89); 12 Apr 2015 22:33:10 -
 RECEIVED:
 by simscan 1.4.0 ppid: 15859, pid: 15862, t: 2.5894s scanners:
 attach: 1.4.0 clamav: 0.98.6/m:55/d:20315 spam: 3.4.0
 X-SPAM-CHECKER-VERSION:
 SpamAssassin 3.4.0 (2014-02-07) on pet110II.whitehorsetc.com
 [2]
 X-SPAM-LEVEL:
 *
 X-SPAM-STATUS:
 No, score=1.8 required=5.0 tests=AWL,BAYES_60,RDNS_NONE
 autolearn=no autolearn_force=no version=3.4.0
 RECEIVED:
 from unknown (HELO mail.qmailtoaster.com [1]) (162.213.42.64)
 by pet110II.whitehorsetc.com [2] with SMTP; 12 Apr 2015 22:33:08
 -
 RECEIVED-SPF:
 pass (pet110II.whitehorsetc.com [2]: SPF record at
 qmailtoaster.com [3] designates 162.213.42.64 as permitted sender)
 RECEIVED:
 (qmail 27565 invoked by uid 89); 12 Apr 2015 22:32:56 -
 MAILING-LIST:
 contact qmailtoaster-list-h...@qmailtoaster.com; run by ezmlm
 DATE:
 12 Apr 2015 22:32:56 -
 MESSAGE-ID:
 1428877976.27265.ezmlm-w...@qmailtoaster.com
 FROM:
 qmailtoaster-list-h...@qmailtoaster.com
 TO:
 ebr...@whitehorsetc.com
 CONTENT-TYPE:
 text/plain; charset=us-ascii
 SUBJECT:
 ezmlm warning
 X-DSPAM-RESULT:
 Innocent
 X-DSPAM-PROCESSED:
 Sun Apr 12 16:33:16 2015
 X-DSPAM-CONFIDENCE:
 0.9989
 X-DSPAM-IMPROBABILITY:
 1 in 90997

Re: [qmailtoaster] Fwd: ezmlm warning

[Fabian Santiago]

I received this:

Hi! This is the ezmlm program. I'm managing the
qmailtoaster-list@qmailtoaster.com mailing list.

I'm working for my owner, who can be reached
at qmailtoaster-list-ow...@qmailtoaster.com.


Messages to you from the qmailtoaster-list mailing list seem to
have been bouncing. I've attached a copy of the first bounce
message I received.

If this message bounces too, I will send you a probe. If the probe bounces,
I will remove your address from the qmailtoaster-list mailing list,
without further notice.


I've kept a list of which messages from the qmailtoaster-list mailing list
have
bounced from your address.

Copies of these messages may be in the archive.

To retrieve a set of messages 123-145 (a maximum of 100 per request),
send an empty message to:
  qmailtoaster-list-get.123_...@qmailtoaster.com

To receive a subject and author list for the last 100 or so messages,
send an empty message to:
  qmailtoaster-list-in...@qmailtoaster.com

Here are the message numbers:

  17822

--- Enclosed is a copy of the bounce message I received.

Return-Path: 
Received: (qmail 5440 invoked for bounce); 1 Apr 2015 01:04:06 -
Date: 1 Apr 2015 01:04:06 -
From: mailer-dae...@mail.qmailtoaster.com
To: qmailtoaster-list-return-178...@qmailtoaster.com
Subject: failure notice

Hi. This is the qmail-send program at mail.qmailtoaster.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

fsanti...@garden-life.org:
User and password not set, continuing without authentication.
fsanti...@garden-life.org 74.125.129.26 failed after I sent the message.
Remote host said: 552-5.7.0 This message was blocked because its content
presents a potential
552-5.7.0 security issue. Please visit
552-5.7.0 http://support.google.com/mail/bin/answer.py?answer=6590 to
review our
552 5.7.0 message content and attachment content guidelines.
k6si19967000pdm.248 - gsmtp

Sincerely,

Fabian Santiago

Sent from my iPhone

On Apr 12, 2015, at 6:39 PM, Eric Broch ebr...@whitehorsetc.com wrote:

 Has anyone on the list received one of these?


 Forwarded Message   Return-Path:
qmailtoaster-list-return-warn-1428877952.nbpofmengabfjhfjnpna-ebroch=whitehorsetc@qmailtoaster.com
qmailtoaster-list-return-warn-1428877952.nbpofmengabfjhfjnpna-ebroch=whitehorsetc@qmailtoaster.com
 Delivered-To:
whitehorsetc.com-ebr...@whitehorsetc.com  Received: (qmail 15878 invoked by
uid 89); 12 Apr 2015 22:33:10 -  Received: by simscan 1.4.0 ppid:
15859, pid: 15862, t: 2.5894s scanners: attach: 1.4.0 clamav:
0.98.6/m:55/d:20315 spam: 3.4.0  X-Spam-Checker-Version: SpamAssassin 3.4.0
(2014-02-07) on pet110II.whitehorsetc.com  X-Spam-Level: *  X-Spam-Status: No,
score=1.8 required=5.0 tests=AWL,BAYES_60,RDNS_NONE autolearn=no
autolearn_force=no version=3.4.0  Received: from unknown (HELO
mail.qmailtoaster.com) (162.213.42.64) by pet110II.whitehorsetc.com with
SMTP; 12 Apr 2015 22:33:08 -  Received-SPF: pass (
pet110II.whitehorsetc.com: SPF record at qmailtoaster.com designates
162.213.42.64 as permitted sender)  Received: (qmail 27565 invoked by uid
89); 12 Apr 2015 22:32:56 -  Mailing-List: contact
qmailtoaster-list-h...@qmailtoaster.com; run by ezmlm  Date: 12 Apr 2015
22:32:56 -  Message-ID: 1428877976.27265.ezmlm-w...@qmailtoaster.com
1428877976.27265.ezmlm-w...@qmailtoaster.com  From:
qmailtoaster-list-h...@qmailtoaster.com  To: ebr...@whitehorsetc.com
Content-type:
text/plain; charset=us-ascii  Subject: ezmlm warning  X-DSPAM-Result:
Innocent  X-DSPAM-Processed: Sun Apr 12 16:33:16 2015  X-DSPAM-Confidence:
0.9989  X-DSPAM-Improbability: 1 in 90997 chance of being spam
X-DSPAM-Probability:
0.  X-DSPAM-Signature: 1,552af2ac36691819825128

Hi! This is the ezmlm program. I'm managing
theqmailtoaster-l...@qmailtoaster.com mailing list.

I'm working for my owner, who can be reached
at qmailtoaster-list-ow...@qmailtoaster.com.


Messages to you from the qmailtoaster-list mailing list seem to
have been bouncing. I've attached a copy of the first bounce
message I received.

If this message bounces too, I will send you a probe. If the probe bounces,
I will remove your address from the qmailtoaster-list mailing list,
without further notice.


I've kept a list of which messages from the qmailtoaster-list mailing list have
bounced from your address.

Copies of these messages may be in the archive.

To retrieve a set of messages 123-145 (a maximum of 100 per request),
send an empty message to:
   qmailtoaster-list-get.123_...@qmailtoaster.com
qmailtoaster-list-get.123_...@qmailtoaster.com

To receive a subject and author list for the last 100 or so messages,
send an empty message to:
   qmailtoaster-list-in...@qmailtoaster.com
qmailtoaster-list-in...@qmailtoaster.com

Here are the message numbers:

   17822

--- Enclosed is a copy of the bounce message I received.

Return-Path: 
Received: (qmail 5440 invoked for bounce); 1 Apr

[qmailtoaster] question about tlsciphers

[Fabian Santiago]

is it possible to define:

smtp
smtp-ssl

and have each honor a different cipher list such as the control
file tlsserverciphers?

if i can simply pass the environment variable tlsciphers, how do i do
that exactly and does it in fact take precedence over the standard control
file tlsserverciphers?

reason being i wish to have a more restrictive tlsserverciphers for
submission (eliminating SSL) and then create smtp-ssl to allow ssl on port
465.

thanks.

-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] logging?

[Fabian Santiago]

I'm not exactly sure how to correct mrtg's config to make it work. so i
guess no mrtg for now or does someone know how to correct the situation?

- Fabian S.


On Thu, Mar 26, 2015 at 3:08 PM, Finn Buhelt f...@kirstineslund.dk wrote:

 Hi-
 Remember that logs for some of the programs has changed in Qmailtoaster
 for Centos 6 - they are not run by supervise anymore but the system.
 (spamd, Clamd..)
 check /var/qmail/supervise for those remaining in supervise control and
 also - the format (date) has changed in the log for those run by the system.
 (Eric S. and the other Qmail mailtainers are moving from supervise in the
 latest Centos 7 version to let all of Qmailtoaster be handled by the
 system).

 Cheers,
 Finn


 Den 26-03-2015 kl. 18:13 skrev Fabian Santiago:

 wow, ok, so i manually ran the mrtg cron job and receive this output:

 2015-03-26 13:12:46: WARNING: Problem with External get
 '/usr/bin/qmailmrtg C /var/log/qmail/clamd\':
 Expected a Number for 'in' but got 'failed to open dir
 /var/log/qmail/clamd'

 2015-03-26 13:12:46: WARNING: Problem with External get
 '/usr/bin/qmailmrtg C /var/log/qmail/clamd\':
 Expected a Number for 'out' but nothing'

 2015-03-26 13:12:46: WARNING: Problem with External get
 '/usr/bin/qmailmrtg S /var/log/qmail/spamd\':
 Expected a Number for 'in' but got 'failed to open dir
 /var/log/qmail/spamd'

 2015-03-26 13:12:46: WARNING: Problem with External get
 '/usr/bin/qmailmrtg S /var/log/qmail/spamd\':
 Expected a Number for 'out' but nothing'

 2015-03-26 13:12:47: ERROR: Target[messages][_IN_] '\
 $target-[0]{$mode} ' evaluated to 'REF(0x2d3a448)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[messages][_OUT_] '\
 $target-[0]{$mode} ' evaluated to 'REF(0x2d27a70)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[queue-size][_IN_] '\
 $target-[1]{$mode} ' evaluated to 'SCALAR(0x2d1a408)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[queue-size][_OUT_] '\
 $target-[1]{$mode} ' evaluated to 'SCALAR(0x2d126e0)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[clamd][_IN_] '\ $target-[2]{$mode} '
 evaluated to 'SCALAR(0x2d3)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[clamd][_OUT_] '\ $target-[2]{$mode}
 ' evaluated to 'SCALAR(0x2d27830)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[spamd][_IN_] '\ $target-[3]{$mode} '
 evaluated to 'SCALAR(0x2d3b150)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[spamd][_OUT_] '\ $target-[3]{$mode}
 ' evaluated to 'SCALAR(0x2d3b180)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[concurrency][_IN_] '\
 $target-[4]{$mode} ' evaluated to 'REF(0x2d3af70)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[concurrency][_OUT_] '\
 $target-[4]{$mode} ' evaluated to 'SCALAR(0x2d3b0f0)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[messstatus][_IN_] '\
 $target-[5]{$mode} ' evaluated to 'REF(0x2d3b1e0)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[messstatus][_OUT_] '\
 $target-[5]{$mode} ' evaluated to 'SCALAR(0x2d3b228)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[bytes][_IN_] '\ $target-[6]{$mode} '
 evaluated to 'REF(0x2d404a8)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[bytes][_OUT_] '\ $target-[6]{$mode}
 ' evaluated to 'REF(0x2d404c0)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[smtp][_IN_] '\ $target-[7]{$mode} '
 evaluated to 'REF(0x2d406d0)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[smtp][_OUT_] '\ $target-[7]{$mode} '
 evaluated to 'REF(0x2d406e8)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[smtpad][_IN_] '\ $target-[8]{$mode}
 ' evaluated to 'REF(0x2d408f8)' instead of a number
 2015-03-26 13:12:47: ERROR: Target[smtpad][_OUT_] '\ $target-[8]{$mode}
 ' evaluated to 'SCALAR(0x2d40910)' instead of a number

 so no good somewhere?

 - Fabian S.


 On Thu, Mar 26, 2015 at 12:55 PM, Fabian Santiago
 fsanti...@garden-life.org mailto:fsanti...@garden-life.org wrote:

 ok so now isoqlog works and displays data but still no mrtg. i
 presume they aren't directly related.

 On Thu, Mar 26, 2015 at 12:53 PM, Fabian Santiago
 fsanti...@garden-life.org mailto:fsanti...@garden-life.org wrote:

 well, i hadn't but it was listed in my cron jobs. i then
 realized when i tried it manually that the domains file was
 missing. so i added it. will i have to manually edit this file
 each time i add a virtual domain to the server?

 On Thu, Mar 26, 2015 at 12:45 PM, Eric Broch
 ebr...@whitehorsetc.com mailto:ebr...@whitehorsetc.com wrote:

 On 3/26/2015 10:39 AM, Fabian Santiago wrote:
   Are the mrtg and isoqlogs supposed to still work? in my
 default build
   on centos 6.6, they do not. the isoqlog isn't even
 accessible via the
   browser (I can probably figure that out) and the mrtg log
 is blank /
   no activity

[qmailtoaster] qmailctl restart

[Fabian Santiago]

currently, qmailctl restart only restarts send and smtp. it doesn't affect
submission and the logging apparatus.

is this right?



-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] qmailctl restart

[Fabian Santiago]

Dan,

ok that makes sense to me. i was just looking at it too literally then and
not thinking about it as qmailctl stat breaks them out separately and
doesn't restart the time up counter on submission. thanks.

On Mon, Mar 30, 2015 at 4:23 PM, Dan McAllister q...@it4soho.com wrote:

  Fabian:

 Yes and no -- Submission **IS** SMTP, just on a different port.
 So when qmailctl restart kills the qmail-smtp processes, it's also
 killing the submission process.

 Dan

 PS: Just to elaborate:
  -- *SMTP on port 25* SHOULD be used for receiving messages from
 outsiders for your domain(s). As such, it should have all of your AV, SPAM,
 and other protections enabled. Personally, I specifically DENY auth
 logins and relaying on this port so that my users HAVE to use the
 submission port.
  -- *SMTP on port 587* is called SUBMISSION and SHOULD be used solely for
 relaying messages from authenticated users. As such, you may choose to
 apply a lighter touch on SPAM or other protections.

 *How do I configure these differently? *Using *SpamDyke* with different
 config files for each port




 On 3/30/2015 4:00 PM, Fabian Santiago wrote:

 currently, qmailctl restart only restarts send and smtp. it doesn't affect
 submission and the logging apparatus.

  is this right?



  --

 - Sincerely,

  Fabian S.



 --
 IT4SOHO, LLC
 33 - 4th Street N, Suite 211
 St. Petersburg, FL 33701-3806

 CALL TOLL FREE:
   877-IT4SOHO

 877-484-7646 Phone
 727-647-7646 Local
 727-490-4394 Fax

 We have support plans for QMail!





-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] logging?

[Fabian Santiago]

wow, ok, so i manually ran the mrtg cron job and receive this output:

2015-03-26 13:12:46: WARNING: Problem with External get '/usr/bin/qmailmrtg
C /var/log/qmail/clamd\':
   Expected a Number for 'in' but got 'failed to open dir
/var/log/qmail/clamd'

2015-03-26 13:12:46: WARNING: Problem with External get '/usr/bin/qmailmrtg
C /var/log/qmail/clamd\':
   Expected a Number for 'out' but nothing'

2015-03-26 13:12:46: WARNING: Problem with External get '/usr/bin/qmailmrtg
S /var/log/qmail/spamd\':
   Expected a Number for 'in' but got 'failed to open dir
/var/log/qmail/spamd'

2015-03-26 13:12:46: WARNING: Problem with External get '/usr/bin/qmailmrtg
S /var/log/qmail/spamd\':
   Expected a Number for 'out' but nothing'

2015-03-26 13:12:47: ERROR: Target[messages][_IN_] '\ $target-[0]{$mode} '
evaluated to 'REF(0x2d3a448)' instead of a number
2015-03-26 13:12:47: ERROR: Target[messages][_OUT_] '\ $target-[0]{$mode}
' evaluated to 'REF(0x2d27a70)' instead of a number
2015-03-26 13:12:47: ERROR: Target[queue-size][_IN_] '\ $target-[1]{$mode}
' evaluated to 'SCALAR(0x2d1a408)' instead of a number
2015-03-26 13:12:47: ERROR: Target[queue-size][_OUT_] '\
$target-[1]{$mode} ' evaluated to 'SCALAR(0x2d126e0)' instead of a number
2015-03-26 13:12:47: ERROR: Target[clamd][_IN_] '\ $target-[2]{$mode} '
evaluated to 'SCALAR(0x2d3)' instead of a number
2015-03-26 13:12:47: ERROR: Target[clamd][_OUT_] '\ $target-[2]{$mode} '
evaluated to 'SCALAR(0x2d27830)' instead of a number
2015-03-26 13:12:47: ERROR: Target[spamd][_IN_] '\ $target-[3]{$mode} '
evaluated to 'SCALAR(0x2d3b150)' instead of a number
2015-03-26 13:12:47: ERROR: Target[spamd][_OUT_] '\ $target-[3]{$mode} '
evaluated to 'SCALAR(0x2d3b180)' instead of a number
2015-03-26 13:12:47: ERROR: Target[concurrency][_IN_] '\
$target-[4]{$mode} ' evaluated to 'REF(0x2d3af70)' instead of a number
2015-03-26 13:12:47: ERROR: Target[concurrency][_OUT_] '\
$target-[4]{$mode} ' evaluated to 'SCALAR(0x2d3b0f0)' instead of a number
2015-03-26 13:12:47: ERROR: Target[messstatus][_IN_] '\ $target-[5]{$mode}
' evaluated to 'REF(0x2d3b1e0)' instead of a number
2015-03-26 13:12:47: ERROR: Target[messstatus][_OUT_] '\
$target-[5]{$mode} ' evaluated to 'SCALAR(0x2d3b228)' instead of a number
2015-03-26 13:12:47: ERROR: Target[bytes][_IN_] '\ $target-[6]{$mode} '
evaluated to 'REF(0x2d404a8)' instead of a number
2015-03-26 13:12:47: ERROR: Target[bytes][_OUT_] '\ $target-[6]{$mode} '
evaluated to 'REF(0x2d404c0)' instead of a number
2015-03-26 13:12:47: ERROR: Target[smtp][_IN_] '\ $target-[7]{$mode} '
evaluated to 'REF(0x2d406d0)' instead of a number
2015-03-26 13:12:47: ERROR: Target[smtp][_OUT_] '\ $target-[7]{$mode} '
evaluated to 'REF(0x2d406e8)' instead of a number
2015-03-26 13:12:47: ERROR: Target[smtpad][_IN_] '\ $target-[8]{$mode} '
evaluated to 'REF(0x2d408f8)' instead of a number
2015-03-26 13:12:47: ERROR: Target[smtpad][_OUT_] '\ $target-[8]{$mode} '
evaluated to 'SCALAR(0x2d40910)' instead of a number

so no good somewhere?

- Fabian S.


On Thu, Mar 26, 2015 at 12:55 PM, Fabian Santiago fsanti...@garden-life.org
 wrote:

 ok so now isoqlog works and displays data but still no mrtg. i presume
 they aren't directly related.

 On Thu, Mar 26, 2015 at 12:53 PM, Fabian Santiago 
 fsanti...@garden-life.org wrote:

 well, i hadn't but it was listed in my cron jobs. i then realized when i
 tried it manually that the domains file was missing. so i added it. will i
 have to manually edit this file each time i add a virtual domain to the
 server?

 On Thu, Mar 26, 2015 at 12:45 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

 On 3/26/2015 10:39 AM, Fabian Santiago wrote:
  Are the mrtg and isoqlogs supposed to still work? in my default build
  on centos 6.6, they do not. the isoqlog isn't even accessible via the
  browser (I can probably figure that out) and the mrtg log is blank /
  no activity.
 
  thoughts???
 
 
  --
 
  - Sincerely,
 
  Fabian S.
 
 Fabian,

 Did you run this command

 # sh /usr/share/toaster/isoqlog/bin/cron.sh

 Eric

 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




 --

 - Sincerely,

 Fabian S.




 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

[qmailtoaster] logging?

[Fabian Santiago]

Are the mrtg and isoqlogs supposed to still work? in my default build on
centos 6.6, they do not. the isoqlog isn't even accessible via the browser
(I can probably figure that out) and the mrtg log is blank / no activity.

thoughts???


-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / email received stuck in queue

[Fabian Santiago]

i manually edited the db and fixed the user count. will only use the CLI
from now on.

On Thu, Mar 26, 2015 at 12:40 PM, Fabian Santiago fsanti...@garden-life.org
 wrote:

 users looks off:

 domain: deviltracks.net
 uid:89
 gid:89
 dir:/home/vpopmail/domains/deviltracks.net
 users:  2147483647


 On Thu, Mar 26, 2015 at 9:21 AM, Dan McAllister q...@it4soho.com wrote:

  Fabian:

 Look at the output of a */home/vpopmail/bin/vdominfo deviltracks.net
 http://deviltracks.net* and verify that it looks right -- if not, I
 would probably use brute force and command line the adding of the domain

  # */home/vpopmail/bin/vdeldomain deviltracks.net
 http://deviltracks.net ; /home/vpopmail/bin/vadddomain deviltracks.net
 http://deviltracks.net password***

 I learned to stop trusting the vqadmin interface years ago -- must say I
 have yet to regain any trust in it. Perhaps others have other experiences?

 Dan
 IT4SOHO

 On 3/25/2015 8:57 PM, Fabian Santiago wrote:

 ok,

  here's another issue,

  i sent myself two messages. logs look good as far as email being
 scanned and clean. but not delivered. i see that they're stuck in the
 queue.

  i have one domain so far, the same as the server's, deviltracks.net

  mail sent from my gmail account to: postmas...@deviltracks.net

  qmail-qread reports the local receiver as:

  deviltracks.net-postmas...@deviltracks.net

  virtualdomains reads:

  deviltracks.net:deviltracks.net

  i originally added this domain using vqadmin (web). it was my first and
 only domain so far. it is the local actual domain. did i do something wrong?


  --

 - Sincerely,

  Fabian S.



 --
 IT4SOHO, LLC
 33 - 4th Street N, Suite 211
 St. Petersburg, FL 33701-3806

 CALL TOLL FREE:
   877-IT4SOHO

 877-484-7646 Phone
 727-647-7646 Local
 727-490-4394 Fax

 We have support plans for QMail!





 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] logging?

[Fabian Santiago]

well, i hadn't but it was listed in my cron jobs. i then realized when i
tried it manually that the domains file was missing. so i added it. will i
have to manually edit this file each time i add a virtual domain to the
server?

On Thu, Mar 26, 2015 at 12:45 PM, Eric Broch ebr...@whitehorsetc.com
wrote:

 On 3/26/2015 10:39 AM, Fabian Santiago wrote:
  Are the mrtg and isoqlogs supposed to still work? in my default build
  on centos 6.6, they do not. the isoqlog isn't even accessible via the
  browser (I can probably figure that out) and the mrtg log is blank /
  no activity.
 
  thoughts???
 
 
  --
 
  - Sincerely,
 
  Fabian S.
 
 Fabian,

 Did you run this command

 # sh /usr/share/toaster/isoqlog/bin/cron.sh

 Eric

 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / email received stuck in queue

[Fabian Santiago]

users looks off:

domain: deviltracks.net
uid:89
gid:89
dir:/home/vpopmail/domains/deviltracks.net
users:  2147483647


On Thu, Mar 26, 2015 at 9:21 AM, Dan McAllister q...@it4soho.com wrote:

  Fabian:

 Look at the output of a */home/vpopmail/bin/vdominfo deviltracks.net
 http://deviltracks.net* and verify that it looks right -- if not, I
 would probably use brute force and command line the adding of the domain

  # */home/vpopmail/bin/vdeldomain deviltracks.net
 http://deviltracks.net ; /home/vpopmail/bin/vadddomain deviltracks.net
 http://deviltracks.net password***

 I learned to stop trusting the vqadmin interface years ago -- must say I
 have yet to regain any trust in it. Perhaps others have other experiences?

 Dan
 IT4SOHO

 On 3/25/2015 8:57 PM, Fabian Santiago wrote:

 ok,

  here's another issue,

  i sent myself two messages. logs look good as far as email being scanned
 and clean. but not delivered. i see that they're stuck in the queue.

  i have one domain so far, the same as the server's, deviltracks.net

  mail sent from my gmail account to: postmas...@deviltracks.net

  qmail-qread reports the local receiver as:

  deviltracks.net-postmas...@deviltracks.net

  virtualdomains reads:

  deviltracks.net:deviltracks.net

  i originally added this domain using vqadmin (web). it was my first and
 only domain so far. it is the local actual domain. did i do something wrong?


  --

 - Sincerely,

  Fabian S.



 --
 IT4SOHO, LLC
 33 - 4th Street N, Suite 211
 St. Petersburg, FL 33701-3806

 CALL TOLL FREE:
   877-IT4SOHO

 877-484-7646 Phone
 727-647-7646 Local
 727-490-4394 Fax

 We have support plans for QMail!





-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] logging?

[Fabian Santiago]

ok so now isoqlog works and displays data but still no mrtg. i presume they
aren't directly related.

On Thu, Mar 26, 2015 at 12:53 PM, Fabian Santiago fsanti...@garden-life.org
 wrote:

 well, i hadn't but it was listed in my cron jobs. i then realized when i
 tried it manually that the domains file was missing. so i added it. will i
 have to manually edit this file each time i add a virtual domain to the
 server?

 On Thu, Mar 26, 2015 at 12:45 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

 On 3/26/2015 10:39 AM, Fabian Santiago wrote:
  Are the mrtg and isoqlogs supposed to still work? in my default build
  on centos 6.6, they do not. the isoqlog isn't even accessible via the
  browser (I can probably figure that out) and the mrtg log is blank /
  no activity.
 
  thoughts???
 
 
  --
 
  - Sincerely,
 
  Fabian S.
 
 Fabian,

 Did you run this command

 # sh /usr/share/toaster/isoqlog/bin/cron.sh

 Eric

 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

[qmailtoaster] DKIM status

[Fabian Santiago]

Is DKIM still not recommended to have deployed into the current QMT? and if
it's fine to use, where can I find current docs on implementing it? Thanks
guys.

-- 

- Sincerely,

Fabian S.

[qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

Hello,

I had stepped away from QMT for some time but am returning. Currently, what
is the best route to deploy QMT on Centos and do you recommend Centos 6.x
or 7 / 32 or 64 bit?

I was scanning some of the past list traffic and see that advancements and
updates have been made to the whole process and suite but wasn't sure where
to begin. Thanks.

-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

Eric,

thanks. that was easy. couple initial issues:

1. dovecot wasn't running upon restart. I started it and set it to run at
bootup. correct? Does dovecot need addt'l configuration?

2. when sending a test msg, squirrelmail tells me:

Message not sent. Server replied:

Temporary authentication failure
454 oops, problem with child and I can't auth (#4.3.0)

so I'm guessing something does need to be configured somewhere.

also, what all else do i need configured out of the box?

thanks.

Fabian S.


On Wed, Mar 25, 2015 at 2:54 PM, Eric Broch ebr...@whitehorsetc.com wrote:

 On 3/25/2015 12:25 PM, Fabian Santiago wrote:
  Hello,
 
  I had stepped away from QMT for some time but am returning. Currently,
  what is the best route to deploy QMT on Centos and do you recommend
  Centos 6.x or 7 / 32 or 64 bit?
 
  I was scanning some of the past list traffic and see that advancements
  and updates have been made to the whole process and suite but wasn't
  sure where to begin. Thanks.
 
  --
 
  - Sincerely,
 
  Fabian S.
 
 Hi Fabian,

 The latest stable version is QMT for CentOS 6 found here:
 https://github.com/QMailToaster/qmailtoaster-util
 Read the file README.install. This is very easy.

 For testing on CentOS 7:
 1) Install CentOS 7 minimal install (I install both options under
 minimal install. One is development tools and I can't remember the other).
 2) curl
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh 
 qt_prep.sh
 3) sh qt_prep.sh (Automatic reboot)
 4) sh qt_install.sh

 Eric



 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

yes i did:

@400055134e0918cd9df4 tcpserver: ok 2013 mail.deviltracks.net:127.0.0.1:587
:127.0.0.1::35577
@400055134e091a50ea64 tcpserver: end 2013 status 256
@400055134e091a50fa04 tcpserver: status: 0/100
@400055134eba1faa48fc tcpserver: status: 1/100
@400055134eba1fafcb24 tcpserver: pid 2176 from 127.0.0.1
@400055134eba1fb0a1fc tcpserver: ok 2176 mail.deviltracks.net:127.0.0.1:587
:127.0.0.1::35579
@400055134eba20533ee4 tcpserver: end 2176 status 256
@400055134eba20534a9c tcpserver: status: 0/100
@400055134ebb1794facc tcpserver: status: 1/100
@400055134ebb179b5b9c tcpserver: pid 2179 from 127.0.0.1
@400055134ebb179c26bc tcpserver: ok 2179 mail.deviltracks.net:127.0.0.1:587
:127.0.0.1::35581
@400055134ebb1846e994 tcpserver: end 2179 status 256
@400055134ebb1846f164 tcpserver: status: 0/100


On Wed, Mar 25, 2015 at 8:05 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  Did you look in the submission log (/var/log/qmail/submission/current)?

 On 3/25/2015 5:51 PM, Fabian Santiago wrote:

 eric,

  no log entries i can see.

  squirrel interface reports:
 Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)


 and this is centos 6.6.

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 6:11 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  And, is this the error in the submission/smtp log (if not could you
 post it) or the error that you get at the squirrelmail interface.

 On 3/25/2015 3:47 PM, Fabian Santiago wrote:

 Eric,

  thanks. that was easy. couple initial issues:

  1. dovecot wasn't running upon restart. I started it and set it to run
 at bootup. correct? Does dovecot need addt'l configuration?

  2. when sending a test msg, squirrelmail tells me:

  Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)

 so I'm guessing something does need to be configured somewhere.

 also, what all else do i need configured out of the box?

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 2:54 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  On 3/25/2015 12:25 PM, Fabian Santiago wrote:
  Hello,
 
  I had stepped away from QMT for some time but am returning. Currently,
  what is the best route to deploy QMT on Centos and do you recommend
  Centos 6.x or 7 / 32 or 64 bit?
 
  I was scanning some of the past list traffic and see that advancements
  and updates have been made to the whole process and suite but wasn't
  sure where to begin. Thanks.
 
  --
 
  - Sincerely,
 
  Fabian S.
 
  Hi Fabian,

 The latest stable version is QMT for CentOS 6 found here:
 https://github.com/QMailToaster/qmailtoaster-util
 Read the file README.install. This is very easy.

 For testing on CentOS 7:
 1) Install CentOS 7 minimal install (I install both options under
 minimal install. One is development tools and I can't remember the
 other).
 2) curl
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh 
 qt_prep.sh
 3) sh qt_prep.sh (Automatic reboot)
 4) sh qt_install.sh

 Eric



 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




  --

 - Sincerely,

  Fabian S.





  --

 - Sincerely,

  Fabian S.





-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

eric,

that article didn't help me but in the system messages log i see this each
time i try sending:

mail kernel: vchkpw[2180]: segfault at 0 ip 7f782236b2b6 sp
7ffd8690c3d8 error 4 in libc-2.12.so[7f7822243000+18a000]



On Wed, Mar 25, 2015 at 7:59 PM, Eric Broch ebr...@whitehorsetc.com wrote:

 On 3/25/2015 5:51 PM, Fabian Santiago wrote:
  Temporary authentication failure
 Hmmm... Very odd. Have a look at this (sparse results googling).


 http://www.infomaster.org/qmail-454-oops-unable-write-pipe-and-i-cant-auth-4-3-0



 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / email received stuck in queue

[Fabian Santiago]

eric,

i think when i was exploring my first issue i messed up the vpopmail
directory structure's permissions. can you tell me, what are the default
permissions for things under /home/vpopmail/..? sorry, oops...



On Wed, Mar 25, 2015 at 9:06 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  What's in the send log (/var/log/qmail/send/current)?
 Could it be a DNS issue?


 On 3/25/2015 6:57 PM, Fabian Santiago wrote:

 ok,

  here's another issue,

  i sent myself two messages. logs look good as far as email being scanned
 and clean. but not delivered. i see that they're stuck in the queue.

  i have one domain so far, the same as the server's, deviltracks.net

  mail sent from my gmail account to: postmas...@deviltracks.net

  qmail-qread reports the local receiver as:

  deviltracks.net-postmas...@deviltracks.net

  virtualdomains reads:

  deviltracks.net:deviltracks.net

  i originally added this domain using vqadmin (web). it was my first and
 only domain so far. it is the local actual domain. did i do something wrong?


  --

 - Sincerely,

  Fabian S.





-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / email received stuck in queue

[Fabian Santiago]

and my mail was delivered once i fixed my mess. thanks for your input and
help Eric.

On Wed, Mar 25, 2015 at 9:37 PM, Fabian Santiago fsanti...@garden-life.org
wrote:

 nvm, i created a new domain and i'm copying that. standby. sorry for what
 may have been an unreasonable request

 On Wed, Mar 25, 2015 at 9:23 PM, Fabian Santiago 
 fsanti...@garden-life.org wrote:

 eric,

 i think when i was exploring my first issue i messed up the vpopmail
 directory structure's permissions. can you tell me, what are the default
 permissions for things under /home/vpopmail/..? sorry, oops...



 On Wed, Mar 25, 2015 at 9:06 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  What's in the send log (/var/log/qmail/send/current)?
 Could it be a DNS issue?


 On 3/25/2015 6:57 PM, Fabian Santiago wrote:

 ok,

  here's another issue,

  i sent myself two messages. logs look good as far as email being
 scanned and clean. but not delivered. i see that they're stuck in the
 queue.

  i have one domain so far, the same as the server's, deviltracks.net

  mail sent from my gmail account to: postmas...@deviltracks.net

  qmail-qread reports the local receiver as:

  deviltracks.net-postmas...@deviltracks.net

  virtualdomains reads:

  deviltracks.net:deviltracks.net

  i originally added this domain using vqadmin (web). it was my first
 and only domain so far. it is the local actual domain. did i do something
 wrong?


  --

 - Sincerely,

  Fabian S.





 --

 - Sincerely,

 Fabian S.




 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / email received stuck in queue

[Fabian Santiago]

nvm, i created a new domain and i'm copying that. standby. sorry for what
may have been an unreasonable request

On Wed, Mar 25, 2015 at 9:23 PM, Fabian Santiago fsanti...@garden-life.org
wrote:

 eric,

 i think when i was exploring my first issue i messed up the vpopmail
 directory structure's permissions. can you tell me, what are the default
 permissions for things under /home/vpopmail/..? sorry, oops...



 On Wed, Mar 25, 2015 at 9:06 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  What's in the send log (/var/log/qmail/send/current)?
 Could it be a DNS issue?


 On 3/25/2015 6:57 PM, Fabian Santiago wrote:

 ok,

  here's another issue,

  i sent myself two messages. logs look good as far as email being
 scanned and clean. but not delivered. i see that they're stuck in the
 queue.

  i have one domain so far, the same as the server's, deviltracks.net

  mail sent from my gmail account to: postmas...@deviltracks.net

  qmail-qread reports the local receiver as:

  deviltracks.net-postmas...@deviltracks.net

  virtualdomains reads:

  deviltracks.net:deviltracks.net

  i originally added this domain using vqadmin (web). it was my first and
 only domain so far. it is the local actual domain. did i do something wrong?


  --

 - Sincerely,

  Fabian S.





 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

eric,

i've been reading around. my os is 64 bit. some people have complained
about that. is that the culprit maybe?

On Wed, Mar 25, 2015 at 8:14 PM, Fabian Santiago fsanti...@garden-life.org
wrote:

 yes i did:

 @400055134e0918cd9df4 tcpserver: ok 2013 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35577
 @400055134e091a50ea64 tcpserver: end 2013 status 256
 @400055134e091a50fa04 tcpserver: status: 0/100
 @400055134eba1faa48fc tcpserver: status: 1/100
 @400055134eba1fafcb24 tcpserver: pid 2176 from 127.0.0.1
 @400055134eba1fb0a1fc tcpserver: ok 2176 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35579
 @400055134eba20533ee4 tcpserver: end 2176 status 256
 @400055134eba20534a9c tcpserver: status: 0/100
 @400055134ebb1794facc tcpserver: status: 1/100
 @400055134ebb179b5b9c tcpserver: pid 2179 from 127.0.0.1
 @400055134ebb179c26bc tcpserver: ok 2179 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35581
 @400055134ebb1846e994 tcpserver: end 2179 status 256
 @400055134ebb1846f164 tcpserver: status: 0/100


 On Wed, Mar 25, 2015 at 8:05 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  Did you look in the submission log (/var/log/qmail/submission/current)?

 On 3/25/2015 5:51 PM, Fabian Santiago wrote:

 eric,

  no log entries i can see.

  squirrel interface reports:
 Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)


 and this is centos 6.6.

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 6:11 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  And, is this the error in the submission/smtp log (if not could you
 post it) or the error that you get at the squirrelmail interface.

 On 3/25/2015 3:47 PM, Fabian Santiago wrote:

 Eric,

  thanks. that was easy. couple initial issues:

  1. dovecot wasn't running upon restart. I started it and set it to
 run at bootup. correct? Does dovecot need addt'l configuration?

  2. when sending a test msg, squirrelmail tells me:

  Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)

 so I'm guessing something does need to be configured somewhere.

 also, what all else do i need configured out of the box?

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 2:54 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  On 3/25/2015 12:25 PM, Fabian Santiago wrote:
  Hello,
 
  I had stepped away from QMT for some time but am returning. Currently,
  what is the best route to deploy QMT on Centos and do you recommend
  Centos 6.x or 7 / 32 or 64 bit?
 
  I was scanning some of the past list traffic and see that advancements
  and updates have been made to the whole process and suite but wasn't
  sure where to begin. Thanks.
 
  --
 
  - Sincerely,
 
  Fabian S.
 
  Hi Fabian,

 The latest stable version is QMT for CentOS 6 found here:
 https://github.com/QMailToaster/qmailtoaster-util
 Read the file README.install. This is very easy.

 For testing on CentOS 7:
 1) Install CentOS 7 minimal install (I install both options under
 minimal install. One is development tools and I can't remember the
 other).
 2) curl
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh 
 qt_prep.sh
 3) sh qt_prep.sh (Automatic reboot)
 4) sh qt_install.sh

 Eric



 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail:
 qmailtoaster-list-h...@qmailtoaster.com




  --

 - Sincerely,

  Fabian S.





  --

 - Sincerely,

  Fabian S.





 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

eric,

i got it; had to increase my softlimit in /
var/qmail/supervise/submission/run

i set it to 1

thanks for your help. now i wonder what else i may find?

On Wed, Mar 25, 2015 at 8:23 PM, Fabian Santiago fsanti...@garden-life.org
wrote:

 eric,

 i've been reading around. my os is 64 bit. some people have complained
 about that. is that the culprit maybe?

 On Wed, Mar 25, 2015 at 8:14 PM, Fabian Santiago 
 fsanti...@garden-life.org wrote:

 yes i did:

 @400055134e0918cd9df4 tcpserver: ok 2013 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35577
 @400055134e091a50ea64 tcpserver: end 2013 status 256
 @400055134e091a50fa04 tcpserver: status: 0/100
 @400055134eba1faa48fc tcpserver: status: 1/100
 @400055134eba1fafcb24 tcpserver: pid 2176 from 127.0.0.1
 @400055134eba1fb0a1fc tcpserver: ok 2176 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35579
 @400055134eba20533ee4 tcpserver: end 2176 status 256
 @400055134eba20534a9c tcpserver: status: 0/100
 @400055134ebb1794facc tcpserver: status: 1/100
 @400055134ebb179b5b9c tcpserver: pid 2179 from 127.0.0.1
 @400055134ebb179c26bc tcpserver: ok 2179 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35581
 @400055134ebb1846e994 tcpserver: end 2179 status 256
 @400055134ebb1846f164 tcpserver: status: 0/100


 On Wed, Mar 25, 2015 at 8:05 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  Did you look in the submission log (/var/log/qmail/submission/current)?

 On 3/25/2015 5:51 PM, Fabian Santiago wrote:

 eric,

  no log entries i can see.

  squirrel interface reports:
 Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)


 and this is centos 6.6.

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 6:11 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  And, is this the error in the submission/smtp log (if not could you
 post it) or the error that you get at the squirrelmail interface.

 On 3/25/2015 3:47 PM, Fabian Santiago wrote:

 Eric,

  thanks. that was easy. couple initial issues:

  1. dovecot wasn't running upon restart. I started it and set it to
 run at bootup. correct? Does dovecot need addt'l configuration?

  2. when sending a test msg, squirrelmail tells me:

  Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)

 so I'm guessing something does need to be configured somewhere.

 also, what all else do i need configured out of the box?

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 2:54 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  On 3/25/2015 12:25 PM, Fabian Santiago wrote:
  Hello,
 
  I had stepped away from QMT for some time but am returning.
 Currently,
  what is the best route to deploy QMT on Centos and do you recommend
  Centos 6.x or 7 / 32 or 64 bit?
 
  I was scanning some of the past list traffic and see that
 advancements
  and updates have been made to the whole process and suite but wasn't
  sure where to begin. Thanks.
 
  --
 
  - Sincerely,
 
  Fabian S.
 
  Hi Fabian,

 The latest stable version is QMT for CentOS 6 found here:
 https://github.com/QMailToaster/qmailtoaster-util
 Read the file README.install. This is very easy.

 For testing on CentOS 7:
 1) Install CentOS 7 minimal install (I install both options under
 minimal install. One is development tools and I can't remember the
 other).
 2) curl
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh 
 qt_prep.sh
 3) sh qt_prep.sh (Automatic reboot)
 4) sh qt_install.sh

 Eric



 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail:
 qmailtoaster-list-h...@qmailtoaster.com




  --

 - Sincerely,

  Fabian S.





  --

 - Sincerely,

  Fabian S.





 --

 - Sincerely,

 Fabian S.




 --

 - Sincerely,

 Fabian S.




-- 

- Sincerely,

Fabian S.

[qmailtoaster] Getting my feet wet again / email received stuck in queue

[Fabian Santiago]

ok,

here's another issue,

i sent myself two messages. logs look good as far as email being scanned
and clean. but not delivered. i see that they're stuck in the queue.

i have one domain so far, the same as the server's, deviltracks.net

mail sent from my gmail account to: postmas...@deviltracks.net

qmail-qread reports the local receiver as:

deviltracks.net-postmas...@deviltracks.net

virtualdomains reads:

deviltracks.net:deviltracks.net

i originally added this domain using vqadmin (web). it was my first and
only domain so far. it is the local actual domain. did i do something wrong?


-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

eric,

for me it was the softlimit. my mysql dir contains:

total 3168
drwxr-xr-x  3 root root4096 Mar 25 15:55 .
dr-xr-xr-x 42 root root   20480 Mar 25 15:55 ..
lrwxrwxrwx  1 root root  26 Mar  9  2014 libmysqlclient_r.so.16 -
libmysqlclient_r.so.16.0.0
-rwxr-xr-x  1 root root 1595240 Feb 12  2014 libmysqlclient_r.so.16.0.0
lrwxrwxrwx  1 root root  24 Mar  9  2014 libmysqlclient.so.16 -
libmysqlclient.so.16.0.0
-rwxr-xr-x  1 root root 1584680 Feb 12  2014 libmysqlclient.so.16.0.0
-rwxr-xr-x  1 root root   12935 Feb 12  2014 mysqlbug
-rwxr-xr-x  1 root root6399 Feb 12  2014 mysql_config
drwxr-xr-x  2 root root4096 Mar 25 15:55 plugin



On Wed, Mar 25, 2015 at 9:00 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  Fabian,

 Not sure of anymore issues, trying to troubleshoot your issue, I ran into
 my own (/home/vpopmail/bin/vchkpw: error while loading shared libraries:
 libmysqlclient.so.15: cannot open shared object file). I thought it was the
 soft limit but no such luck. Can you tell me what's in your
 /usr/lib64/mysql directory?

 Eric


 On 3/25/2015 6:34 PM, Fabian Santiago wrote:

 eric,

  i got it; had to increase my softlimit in /
 var/qmail/supervise/submission/run

  i set it to 1

  thanks for your help. now i wonder what else i may find?

 On Wed, Mar 25, 2015 at 8:23 PM, Fabian Santiago 
 fsanti...@garden-life.org wrote:

 eric,

  i've been reading around. my os is 64 bit. some people have complained
 about that. is that the culprit maybe?

 On Wed, Mar 25, 2015 at 8:14 PM, Fabian Santiago 
 fsanti...@garden-life.org wrote:

 yes i did:

  @400055134e0918cd9df4 tcpserver: ok 2013 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35577
 @400055134e091a50ea64 tcpserver: end 2013 status 256
 @400055134e091a50fa04 tcpserver: status: 0/100
 @400055134eba1faa48fc tcpserver: status: 1/100
 @400055134eba1fafcb24 tcpserver: pid 2176 from 127.0.0.1
 @400055134eba1fb0a1fc tcpserver: ok 2176 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35579
 @400055134eba20533ee4 tcpserver: end 2176 status 256
 @400055134eba20534a9c tcpserver: status: 0/100
 @400055134ebb1794facc tcpserver: status: 1/100
 @400055134ebb179b5b9c tcpserver: pid 2179 from 127.0.0.1
 @400055134ebb179c26bc tcpserver: ok 2179 
 mail.deviltracks.net:127.0.0.1:587
 :127.0.0.1::35581
 @400055134ebb1846e994 tcpserver: end 2179 status 256
 @400055134ebb1846f164 tcpserver: status: 0/100


 On Wed, Mar 25, 2015 at 8:05 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  Did you look in the submission log
 (/var/log/qmail/submission/current)?

 On 3/25/2015 5:51 PM, Fabian Santiago wrote:

 eric,

  no log entries i can see.

  squirrel interface reports:
 Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)


 and this is centos 6.6.

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 6:11 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  And, is this the error in the submission/smtp log (if not could you
 post it) or the error that you get at the squirrelmail interface.

 On 3/25/2015 3:47 PM, Fabian Santiago wrote:

 Eric,

  thanks. that was easy. couple initial issues:

  1. dovecot wasn't running upon restart. I started it and set it to
 run at bootup. correct? Does dovecot need addt'l configuration?

  2. when sending a test msg, squirrelmail tells me:

  Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)

 so I'm guessing something does need to be configured somewhere.

 also, what all else do i need configured out of the box?

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 2:54 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  On 3/25/2015 12:25 PM, Fabian Santiago wrote:
  Hello,
 
  I had stepped away from QMT for some time but am returning.
 Currently,
  what is the best route to deploy QMT on Centos and do you recommend
  Centos 6.x or 7 / 32 or 64 bit?
 
  I was scanning some of the past list traffic and see that
 advancements
  and updates have been made to the whole process and suite but wasn't
  sure where to begin. Thanks.
 
  --
 
  - Sincerely,
 
  Fabian S.
 
  Hi Fabian,

 The latest stable version is QMT for CentOS 6 found here:
 https://github.com/QMailToaster/qmailtoaster-util
 Read the file README.install. This is very easy.

 For testing on CentOS 7:
 1) Install CentOS 7 minimal install (I install both options under
 minimal install. One is development tools and I can't remember the
 other).
 2) curl
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh 
 qt_prep.sh
 3) sh qt_prep.sh (Automatic reboot)
 4) sh qt_install.sh

 Eric



 -
 To unsubscribe, e-mail:
 qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail:
 qmailtoaster-list-h...@qmailtoaster.com




  --

 - Sincerely,

  Fabian S

Re: [qmailtoaster] Getting my feet wet again / Best route for deployment of QMT on Centos...

[Fabian Santiago]

eric,

no log entries i can see.

squirrel interface reports:
Message not sent. Server replied:

Temporary authentication failure
454 oops, problem with child and I can't auth (#4.3.0)


and this is centos 6.6.

thanks.

Fabian S.


On Wed, Mar 25, 2015 at 6:11 PM, Eric Broch ebr...@whitehorsetc.com wrote:

  And, is this the error in the submission/smtp log (if not could you post
 it) or the error that you get at the squirrelmail interface.

 On 3/25/2015 3:47 PM, Fabian Santiago wrote:

 Eric,

  thanks. that was easy. couple initial issues:

  1. dovecot wasn't running upon restart. I started it and set it to run
 at bootup. correct? Does dovecot need addt'l configuration?

  2. when sending a test msg, squirrelmail tells me:

  Message not sent. Server replied:

 Temporary authentication failure
 454 oops, problem with child and I can't auth (#4.3.0)

 so I'm guessing something does need to be configured somewhere.

 also, what all else do i need configured out of the box?

 thanks.

 Fabian S.


 On Wed, Mar 25, 2015 at 2:54 PM, Eric Broch ebr...@whitehorsetc.com
 wrote:

  On 3/25/2015 12:25 PM, Fabian Santiago wrote:
  Hello,
 
  I had stepped away from QMT for some time but am returning. Currently,
  what is the best route to deploy QMT on Centos and do you recommend
  Centos 6.x or 7 / 32 or 64 bit?
 
  I was scanning some of the past list traffic and see that advancements
  and updates have been made to the whole process and suite but wasn't
  sure where to begin. Thanks.
 
  --
 
  - Sincerely,
 
  Fabian S.
 
  Hi Fabian,

 The latest stable version is QMT for CentOS 6 found here:
 https://github.com/QMailToaster/qmailtoaster-util
 Read the file README.install. This is very easy.

 For testing on CentOS 7:
 1) Install CentOS 7 minimal install (I install both options under
 minimal install. One is development tools and I can't remember the other).
 2) curl
 ftp://ftp.whitehorsetc.com/pub/qmail/CentOS7/qmt/scripts/qt_prep.sh 
 qt_prep.sh
 3) sh qt_prep.sh (Automatic reboot)
 4) sh qt_install.sh

 Eric



 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




  --

 - Sincerely,

  Fabian S.





-- 

- Sincerely,

Fabian S.

Re: [qmailtoaster] Re: winnow.spam.ts.stock.4.UNOFFICIAL virus

[Fabian Santiago]

call me crazy but after you enter your email into the fields to 
subscribe, how do you proceed from there? Just pressing enter brings you 
to an incomplete form error message. Not topic related so for that i 
apologize...


---

Sincerely,

- Fabian S.

On 2014-06-20 15:49, Eric Shubert wrote:

On 06/20/2014 12:33 PM, LHTek wrote:

I've got users getting this message when sending with attachments.

Anybody else getting this error?

Details:
They are trying to send a PNG file. If they convert it to JPG it goes 
fine.


Seems to only be POP3 clients. I'm on IMAP and don't have any issues.

I would think it's a  user that has a virus but now I've got 2 users 
who

are experiencing the same issue.



This is likely a FP from that sanesecurity (aka unofficial) clamav 
rule.


I don't see anything about this rule on the sanesecurity list.

There's a way to disable specific rules, which you probably want to
do. I don't recall off hand how to do that.

Please post this to the sanesecurity list for more help.
http://www.sanesecurity.me.uk/wordpress/support/mailing-list
You can also access the list via gmane.org at
gmane.comp.security.virus.clamav.sanesecurity

Thanks.


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] to catch all or no

[Fabian Santiago]

 

If you must have a catch all, I would go with option 2. With option 1's
quota, + or -. 

---

Sincerely,

- Fabian S.

On 2014-05-19 09:15, Jim Shupert wrote: 

 Friends,
 
 1st let me say that i have asked this forum for advice on my battele with 
 spam and I can say that I am enjoying success from the wisdom.
 thank you.
 
 a related matter.
 
 I [ the postmaster ] personnally get a lot of spam because I am the ctach all 
 account.
 this means I get spam for ' people who do not exist - this is 2 catagories.
 1- accounts that did exist in the past but no longer. ie billiebob left - so 
 no billie...@mydom.com anymore
 2- accounts that have never existed . ie unic...@mydom.com
 
 as you might suspect these are largely spam.
 
 My q - what is a suggested means of doing this?
 my thoughts are
 1. a account is made named d...@mydom.com as catch all and assign it a quota 
 of 5 MB
 2 make s...@mydom.com the catch all.
 or
 3. no change - meaning leave it so it goes to my mailbox as catch all.
 
 thanks
 

Re: [qmailtoaster] rpm forge

[Fabian Santiago]

Is the older non-YUMable stuff still around and for how much longer?

---

Sincerely,

- Fabian S.

On 2014-05-15 11:14, Eric Broch wrote:

Hi EricS,

I did a qtp-newmodel today to install the new clamav software on CentOS
5 QMT and received this error: qtp-install-rpmforge -
https://raw.github.com/repoforge/rpms/master/specs/rpmforge-release/rpmforge-release.spec
not found, please try again later,
which I wouldn't think to much of but I've received this error (or one
like it) several times when installing QMT on CentOS 6 system while
running qt-install which calls qt-install-repoforge. When I ran
qt-install-repoforge itself, it worked.
Any thoughts?

Eric

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com



-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Qmail virtual hosting

[Fabian Santiago]

I've used Linode. Very good and reasonably priced. 

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Apr 23, 2014, at 9:43 AM, Wicus Roets wi...@r4c.co.za wrote:
 
  
 Which cloud service provider can anyone vouch for to have a CentOS VM hosted, 
 allowing full root access to setup/config qmail, wordpress etc?
 
 
   
 This email is free from viruses and malware because avast! Antivirus 
 protection is active.
 
 


smime.p7s
Description: S/MIME cryptographic signature

Re: [qmailtoaster] Re: QMT on COS6 Officially Released!

[Fabian Santiago]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hello,

Does the new release add sieve filtering yet and possibly the ability
to integrate DMARC filtering / processing using something like
opendmarc? I don't recall if I heard anything about that. Thanks.

- - Fabian S.


On 4/23/2014 7:02 PM, Hasan Akgöz wrote:
 Hi folks;
 
 Do you have LDAP support?
 
 
 2014-04-23 6:43 GMT+03:00 Eric Shubert e...@shubes.net:
 
 On 04/22/2014 01:52 PM, DNK wrote:
 
 
 
 -Original Message- From: Eric Shubert
 Sent: Monday, April 21, 2014 4:58 PM To:
 qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster]
 QMT on COS6 Officially Released!
 
 
 
 Documentation is still a bit behind. If anyone would like
 to get some experience with github's wiki, let me know and
 we can apply some teamwork on getting that going. What we
 do with that presently has wide open possibilities.
 
 
 What is the URL for the new docs? Is it something people can
 have a look at?
 
 
 Sure. Here it is: 
 https://github.com/QMailToaster/qmailtoaster-util/blob/master/README.

 
install
 
 Pretty simple, eh? Well, simple anywise. Perhaps not so pretty.
 ;)
 
 I'm not yet sure how the wiki's going to fit in to github.
 
 As you can see here: https://github.com/QMailToaster Each package
 has its own repository on github. Having a repo for each package
 made good sense when it came to automating the build process. I 
 hope to get the new build process documented one day (it's
 highly automated, and the scripts are in the qmailtoaster-repo, 
 qmailtoaster-develope and qmailtoaster-build package/repos) -
 perhaps we'll have a qmailtoaster-mirror package/repo at some
 point as well). Keep in mind that these are *source* repos, which
 serve an entirely different role than the yum repos that reside
 on all the mirrors. It's almost a shame that they're both called
 repos, because they're extremely different things.
 
 Anywise, poke around there some to get a feel for github. It's
 pretty nice, and there's still a lot there that I'm not aware
 of.
 
 Anyone who'd like to contribute can create a github account for
 themself, and I'll be happy to add them to the QMT project.
 
 It appears as though each github repo can have its own wiki. So I
 guess I'll need to create a qmailtoaster-wiki repo, where the new
 wiki will reside. If there are details about any particular
 package, that can go in the package's wiki. This doesn't mean the
 qmt-wiki needs to follow the structure of the package repos, only
 that the project wiki can reference package-specific wiki pages.
 
 Thanks for asking.
 
 (Gotta go. More later.)
 
 -- -Eric 'shubes'
 
 
 
 -

 
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail:
 qmailtoaster-list-h...@qmailtoaster.com
 
 
 
 
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.22 (MingW32)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQEcBAEBAgAGBQJTWGBeAAoJEGM8afP5SipJuZ0IALAMJjA4GeNJug8RUcr0Hr/Z
prOb6+V3WnLa0gAU3PVqfnaXzgiDD6lc4DHhqaVmrH8Q+Onc5lDFw34Sy6mFiYI0
+9H3LrfrmNFqiR2FjdpEoQ1/twoyjyehJcghGpuPXNwIvenwI1++h0ATds1ozsji
UmN5MkLWDtRvYhmFZD/Ydpmof+ntpzimgT6wLQWYHDmaDMe5iLFVy53K4ccMfhgj
B1I4uYq08um8SkC6h4XpHUUbuWRz7xRajYfWWlpQXaQ907j5rZnVWsgmLse9w/Gk
J0/lFRtKTDhi703c7Jkp7ACJQiTW6sJcC9TJf1eroQVKmUY8BrVlMwwhudEdi6E=
=E4+z
-END PGP SIGNATURE-

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Virtualizing a QMT server!

[Fabian Santiago]

Hi Eric,

What kind of internet connection do you have at home that allows you to host 
email from there? My ISP blocks port 25.

Sincerely,

Fabian Santiago

Sent from my iPhone

 On Mar 1, 2014, at 11:23 AM, Eric Shubert e...@shubes.net wrote:
 
 I've been running QMT as a VM for several years now. First on VMware Server 
 (12), and presently on ProxmoxVE (native linux virtualization). I run it as 
 a KVM, which does better efficiency-wise with COS6 than COS5. OpenVZ should 
 perform nicely. I think some folks here have also run it under Xen.
 
 A few folks have run QMT using a VPS service. Like Alex says, be sure to have 
 enough RAM in this situation.
 
 You should have no problems particular to QMT with VMware. You might want to 
 refer to http://wiki.qmailtoaster.com/index.php/Virtual_QMT for a few 
 pointers. Note, the VMware info there may be a bit dated.
 
 I'd be interested to know how many people self-host virtual QMTs vs using a 
 service. Please chime in here if you're running QMT on a virtual platform.
 
 Personally, I prefer self hosting. I've had a QMT running in my home for 
 nearly 8 years, with 5 or so being virtual.
 
 Thanks for asking, Tony. :)
 
 -- 
 -Eric 'shubes'
 
 On 03/01/2014 08:13 AM, Postmaster wrote:
 Hi Tony,
 
 
 There is no issues running QMT in the virtual environment as is.
 I have been running QMT in the virtual environment for probably 5-6
 years now. Only potential issue is memory (if the server is handling
 many domains + MySQL + ClamAV)
 You have to choose a good provider providing CentOS image. I am using
 linode and can only recommend them.
 
 
 Regards
 Alex
 
 
 On 01/03/2014 13:49, Tony White wrote:
 Hi folks,
  Has anyone tried to virtualize a QMT server yet?
 Has it worked? If so can you tell me how you did it
 so I can do it for my server please?
  Need to move to VM fairly soon as my server is having
 issues.
 
 
 
 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Happy New Year everyone!

[Fabian Santiago]

Hello all,

I wanted to wish everyone a happy new year and I just wanted to say that while 
I've struggled for a long time to find such a helpful group of people with many 
of the products I use, this particular mailing list / community for QMT is 
unsurpassed. Thanks to everyone involved! You're all the best. Have a good one. 
:-)

- Fabian S.

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Emails, Contacts Calendar Sync

[Fabian Santiago]

I know of other server suites that do all that, such as Axigen or Atmail, and 
maybe even IredMail. Not sure about solely webmail packages that do that in 
conjunction with QMT though...
- Fabian S.


On Mon, 12/23/2013 04:55 AM, Linux li...@ikf.co.in wrote:
 








 

 
  
 






Hi,


Anybody knows about the webmail who have ability of  Emails, Contacts  
Calendar Sync between Outlook, Webmail 
any Smart Phone  also global address book.


Please revert.


 


 


Regards,


 


Vivek Patil


system admin


 


 


 


 

[qmailtoaster] Exporting qmail users into htpasswd file for dspam web

[Fabian Santiago]

Hello,

I forget how to get all my qmail users into an htpasswd file for dspam web 
logins. 

I thought there was an easier process than doing it manually. Am I correct? 

Sincerely,

Fabian Santiago

Sent from my iPhone
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] SpamAssassin Working?

[Fabian Santiago]

Eric,

how exactly did you train dspam with the virtual QMT users / domains? 
i've been having trouble figuring that out. Thanks.


---
Fabian S.


On 2013-11-01 14:21, Eric Broch wrote:

Brent,

I've never heard (or I haven't been listening) about implementing
SaneSecurity. Does it work well. Do you know how much spam it stops?
Does it mark it or drop it? Are there config options?
I've just implemented DSPAM on my QmailToaster (ironed out all the bugs
last night) and it works phenomenally. I trained about 30 messages and
haven't had one untagged spam since and no false positives. I've only
trained it with spam, no ham. I realize this has only been 18 hours or
so but it works much better than Spamassassin--I have both installed.
I'm wondering if DSPAM shouldn't be stock in the Toaster packages as
Spamassassin and Spamdyke are not doing it for my clients.

I am now setting up a DSPAM gateway for a client.

Eric


On 11/1/2013 11:51 AM, Brent Gardner wrote:

On 11/01/2013 08:45 AM, Tim Whitaker wrote:

Hi everybody... I've been running qmail toaster on a fresh CentOS 5.9
install for about a month now and all has been well except for one
thing...
spam.  I have googled as much as I could to try and figure out what 
my

problem might be and I've made some changes but still some really
annoying
spam is coming through with file attachments and such.  My problem is 
I

can't figure out how to find any logs to tell me if SpamAssassin is
actually working.  I know the service is running.  In there spirit of
giving too much information, here's a bunch of stuff:

cat /etc/tcprules.d/tcp.smtp
127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private

:allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN=/var/qmail/control/domainkeys/%/private


cat /var/qmail/control/simcontrol
:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif

qmailctl stat
authlib: up (pid 16643) 49008 seconds
clamd: up (pid 16614) 49008 seconds
imap4: down 49008 seconds
imap4-ssl: down 49008 seconds
pop3: up (pid 16603) 49008 seconds
pop3-ssl: up (pid 16665) 49008 seconds
send: up (pid 16626) 49008 seconds
smtp: up (pid 16635) 49008 seconds
spamd: up (pid 16622) 49008 seconds
submission: up (pid 16685) 49007 seconds
authlib/log: up (pid 16645) 49008 seconds
clamd/log: up (pid 16616) 49008 seconds
imap4/log: down 49008 seconds
imap4-ssl/log: down 49008 seconds
pop3/log: up (pid 16605) 49008 seconds
pop3-ssl/log: up (pid 16671) 49008 seconds
send/log: up (pid 16610) 49008 seconds
smtp/log: up (pid 16640) 49008 seconds
spamd/log: up (pid 16631) 49008 seconds
submission/log: up (pid 16661) 49008 seconds


SpamAssassin logs to /var/log/qmail/spamd.


An important component of SpamAssassin is the bayesian analysis of
messages.  I don't remember if this is enabled by default.  To enable
it, put this in /etc/mail/spamassassin/local.cf:

use_bayes 1


Bayesian analysis won't work until it has trained on at least 200 ham
messages and 200 spam messages.  Training can be done manually using a
body of samples you've collected, or it can be done automatically by
looking at messages as they pass through the system during normal
operation.  To enable autolearning, put this in
/etc/mail/spamassassin/local.cf:

bayes_auto_learn 1


More information about SpamAssassin can be found in the QmailToaster
wiki:

http://wiki.qmailtoaster.com/index.php/Spamassassin


And, of course, at the SpamAssassin site:

http://spamassassin.apache.org/


Definitely run Spamdyke.  It greatly reduces the load on the system by
blocking large numbers of obvious spam before they get to the more
resource-intensive Toaster components such as ClamAV and SpamAssassin.

Spamdyke can be installed using scripts in QmailToaster-Plus:

http://qtp.qmailtoaster.com/trac/wiki/Features#qtp-install-spamdyke


I also recommend SaneSecurity signatures for ClamAV.  These allow
ClamAV to catch spam as well as viruses and malware. QmailToaster-Plus
includes an install script for SaneSecurity:

http://qtp.qmailtoaster.com/trac/wiki/Features#qtp-install-sanesecurity


I've been using the SaneSecurity Foxhole signatures to catch archive
attachments (.zip .rar etc.) that contain executables.  More info:

http://sanesecurity.com/foxhole-databases/


You can also block all file attachments with specific extensions by
adding the extension to the attach= clause in
/var/qmail/control/simcontrol.  More info:

http://wiki.qmailtoaster.com/index.php/Simscan


Brent Gardner



-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com





-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] issue with QMT Mailman implementation

[Fabian Santiago]

Hello all,

I've integrated Mailman with my QMT using the wiki instructions provided 
online.


It all seems to function well except for one thing; when I send email to 
'mailman-ow...@lists.photoblogverona.com', I receive back a failure 
notice stating:


Hi. This is the qmail-send program at mail.photoblogverona.com.
I'm afraid I wasn't able to deliver your message to the following 
addresses.

This is a permanent error; I've given up. Sorry it didn't work out.

postmas...@lists.photoblogverona.com:
This message is looping: it already has my Delivered-To line. (#5.4.6)

Where should I be looking or what to look at? Thanks.

--
Fabian S.


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] issues updating clamav with my QMT

[Fabian Santiago]

Hello,

please see two attached txt files.

one was me trying to update using qtp-newmodel. The other was trying to 
do it manually with rpm.


qtp-newmodel fails because it can't load dependencies. there are 3 with 
no packages available:


No package compat-libf2c available.
No package compat-libgcc available.
No package compat-libsdc++-33 available.

and the other failure is trying to update php. this server is a COS 5.9 
box where I had manually installed and upgraded to php5.3 (since the 
repos only give you php). i had done this to run some others tools that 
required it and it didn't seem to adversely affect any other QMT 
packages. the QMT package dependencies rely on php. so it fails given 
the need for a downgrade.


when i try using rpm manually, it gives the errors seen in the txt file. 
and then nothing happens after that and clamav remains NOT updated.


can Mr. Shubes or anyone else offer me any suggestions? Thanks guys for 
your help in advance.


--

Fabian S.
862-432-2373Getting source packages ...(this may take a while)
clamav-toaster-0.98-1.4.5.src.rpm is already downloaded, bypassed
qtp-dependencies v0.3.2
qtp-install-rpmforge v0.4.0 - getting latest version of rpmforge-release ...
qtp-install-rpmforge - installed package rpmforge-release-0.5.3-1.el5.rf is the 
latest - nothing done.

qtp-dependencies - installing  compat-libf2c compat-libgcc compat-libsdc++-33 
php ...
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirror.steadfast.net
 * epel: mirrors.einstein.yu.edu
 * extras: mirror.steadfast.net
 * rpmforge: mirror.lug.udel.edu
 * updates: centos.mirror.iweb.ca
Setting up Install Process
No package compat-libf2c available.
No package compat-libgcc available.
No package compat-libsdc++-33 available.
Resolving Dependencies
-- Running transaction check
--- Package php.x86_64 0:5.1.6-40.el5_9 set to be updated
-- Processing Dependency: php-cli = 5.1.6-40.el5_9 for package: php
-- Processing Dependency: php-common = 5.1.6-40.el5_9 for package: php
-- Running transaction check
--- Package php-cli.x86_64 0:5.1.6-40.el5_9 set to be updated
--- Package php-common.x86_64 0:5.1.6-40.el5_9 set to be updated
-- Processing Conflict: php53-common conflicts php-common
-- Restarting Dependency Resolution with new changes.
-- Running transaction check
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-xml
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-pdo
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-cli
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-mbstring
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-intl
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: php53
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-mysql
-- Processing Dependency: php53-common = 5.3.3-13.el5_9.1 for package: 
php53-ldap
--- Package php53-common.x86_64 0:5.3.3-21.el5 set to be updated
-- Running transaction check
-- Processing Dependency: php53 = 5.3.3-13.el5_9.1 for package: php53-devel
--- Package php53.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-cli.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-intl.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-ldap.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-mbstring.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-mysql.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-pdo.x86_64 0:5.3.3-21.el5 set to be updated
--- Package php53-xml.x86_64 0:5.3.3-21.el5 set to be updated
-- Running transaction check
--- Package php53-devel.x86_64 0:5.3.3-21.el5 set to be updated
-- Processing Conflict: php53-common conflicts php-common
-- Finished Dependency Resolution
php53-common-5.3.3-21.el5.x86_64 from base has depsolving problems
  -- php53-common conflicts with php-common
Error: php53-common conflicts with php-common
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
The program package-cleanup is found in the yum-utils package.
qtp-dependencies - installation of base dependencies failed, exiting
qtp-newmodel - dependent packages processing failed, exiting
[root@mail SRPMS]# rpm -ivh --nodeps clamav-toaster-0.98-1.4.5.src.rpm
   1:clamav-toaster warning: user shubes does not exist - using root
warning: group shubes does not exist - using root
### [100%]
warning: user shubes does not exist - using root
warning: group shubes does not exist - using root
warning: user shubes does not exist - using root
warning: group shubes does not exist - using root
warning: user shubes does not exist - using root
warning: group shubes does not exist - using root
warning: user shubes does not exist 

Re: [qmailtoaster] Re: issues updating clamav with my QMT

[Fabian Santiago]

Excellent! Thanks for your prompt response!

---

Fabian S.


On 2013-10-21 14:11, Eric Shubert wrote:

Edit your qtp-dependencies script to remove php, then rerun
qtp-newmodel. The No package compat... messages are not fatal.

The reason the manual method didn't work is that you need a binary
(i686 or x86_64) package for that.

--
-Eric 'shubes'

On 10/21/2013 10:59 AM, Fabian Santiago wrote:

Hello,

please see two attached txt files.

one was me trying to update using qtp-newmodel. The other was trying 
to

do it manually with rpm.

qtp-newmodel fails because it can't load dependencies. there are 3 
with

no packages available:

No package compat-libf2c available.
No package compat-libgcc available.
No package compat-libsdc++-33 available.

and the other failure is trying to update php. this server is a COS 
5.9

box where I had manually installed and upgraded to php5.3 (since the
repos only give you php). i had done this to run some others tools 
that

required it and it didn't seem to adversely affect any other QMT
packages. the QMT package dependencies rely on php. so it fails given
the need for a downgrade.

when i try using rpm manually, it gives the errors seen in the txt 
file.

and then nothing happens after that and clamav remains NOT updated.

can Mr. Shubes or anyone else offer me any suggestions? Thanks guys 
for

your help in advance.



-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com







-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Sieve with QMT

[Fabian Santiago]

Any implementation of sieve yet with QMT out there? I saw mention of 
possibly updating and using Dovecot but is there any other way currently 
implemented anywhere of doing this? Thanks.


--

Fabian S.


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: ClamAV not up to date on my QMT

[Fabian Santiago]

Excellent. Thank you for your response.

---

Fabian S.
862-432-2373

On 2013-10-16 16:21, Eric Shubert wrote:

There are clamav-toaster-0.98-1.4.5 packages available in the mirrors
/testing branch. The only problem I've had with those is that they
totally refresh the database files, causing an unnecessary delay while
updating.

I'm in the process of getting that fixed and re-released, and should
have /current packages available in the next few days.

Thanks.

--
-Eric 'shubes'

On 10/15/2013 07:07 AM, Fabian Santiago wrote:

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hello,

My nightly logs show this message:

Last ClamAV update process started at Mon Oct 14 22:54:14 2013

  Last Status:
 WARNING: Your ClamAV installation is OUTDATED!
 WARNING: Local version: 0.97.8 Recommended version: 0.98
 DON'T PANIC! Read http://www.clamav.net/support/faq
 main.cld is up to date (version: 55, sigs: 2424225, f-level: 60,
builder: neo)
 Downloading daily-17962.cdiff [100%]
 daily.cld updated (version: 17962, sigs: 407066, f-level: 63,
builder: guitar)
 bytecode.cld is up to date (version: 228, sigs: 43, f-level: 63,
builder: neo)
 Database updated (2831334 signatures) from db.us.clamav.net (IP:
64.6.100.177)
 Received signal: wake up


My question is: is it safe to update ClamAV manually outside of the
official QMT build? Thanks.

- --

Fabian S.
862-432-2373
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.20 (MingW32)

iQEcBAEBAgAGBQJSXUwLAAoJEDDTUzcgLYrp/5QH+QF2s3Gnx0+QDLz6hPW4JsqX
E9u5ha9dTfHJfeyIYcXfxDg3QXnBBdGykyAcuOMnqeaU5rpD1kM4ZHBXrgoR0+BP
EB+3W3b/UOatXzVPtZ/MZVyIKDEkFhEl31P9pP3BRmhGU9Xff7dM+FJhnUT/bdnG
qeDPOO2xUVgjNiSTQ/I+ySXYDHKJvkI1eBoJP+RFjCZiEMzI35DF4kwhiue5QWYj
BzxKMKposmFspItZWtUaju2pPxCV5Kp4peqTcFTgsJXb9Oi4/egdtNu48PK6MXG1
jRQ2eAIDoBez5d3rWEO4WfRS76PHHXxWkH+mUsv+cLGMBBW2FByfQLq9gASV4Zw=
=CnL5
-END PGP SIGNATURE-


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com








-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] ClamAV not up to date on my QMT

[Fabian Santiago]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hello,

My nightly logs show this message:

Last ClamAV update process started at Mon Oct 14 22:54:14 2013

 Last Status:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.97.8 Recommended version: 0.98
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cld is up to date (version: 55, sigs: 2424225, f-level: 60, 
builder: neo)

Downloading daily-17962.cdiff [100%]
daily.cld updated (version: 17962, sigs: 407066, f-level: 63, 
builder: guitar)
bytecode.cld is up to date (version: 228, sigs: 43, f-level: 63, 
builder: neo)
Database updated (2831334 signatures) from db.us.clamav.net (IP: 
64.6.100.177)

Received signal: wake up


My question is: is it safe to update ClamAV manually outside of the 
official QMT build? Thanks.


- --

Fabian S.
862-432-2373
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.20 (MingW32)

iQEcBAEBAgAGBQJSXUwLAAoJEDDTUzcgLYrp/5QH+QF2s3Gnx0+QDLz6hPW4JsqX
E9u5ha9dTfHJfeyIYcXfxDg3QXnBBdGykyAcuOMnqeaU5rpD1kM4ZHBXrgoR0+BP
EB+3W3b/UOatXzVPtZ/MZVyIKDEkFhEl31P9pP3BRmhGU9Xff7dM+FJhnUT/bdnG
qeDPOO2xUVgjNiSTQ/I+ySXYDHKJvkI1eBoJP+RFjCZiEMzI35DF4kwhiue5QWYj
BzxKMKposmFspItZWtUaju2pPxCV5Kp4peqTcFTgsJXb9Oi4/egdtNu48PK6MXG1
jRQ2eAIDoBez5d3rWEO4WfRS76PHHXxWkH+mUsv+cLGMBBW2FByfQLq9gASV4Zw=
=CnL5
-END PGP SIGNATURE-


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Wierd View Domain Behaviior

[Fabian Santiago]

Hello,

Are you saying that QMT by default uses

1st QMT build vpopmail with disable-users-big-dir (and that this 
contributes to the cause of the problem)


or are you saying that re-building the vpopmail package with this option 
will solve the problem? Thanks. I have seen this happen myself numerous 
times with my QMT server.


---

Fabian S.
862-432-2373

On 2013-10-12 09:43, xaf wrote:

|-- LHTek, le 11/10/2013 20:56, a dit :
When I add a domain I've noticed that the VQADMIN View Domain screen 
is blank. Every other aspect of VQADMIN works as does QMAIL. After 
searching for an answer I found that the cur_user column in the 
vpopmail/dir_control table needed to be reset. Of the domains that 
showed a blank screen in VQADMIN, The content of that particular field 
is something like 21441236575 - a very strange number. Upon 
resetting it to 0 everything works again.


Although this is more of a encumbrance than real issue, I'm curious 
what might be causing this. Has anyone else seen this occur? I would 
think that cur_users should be the actual count of the number of 
users. I suppose I could write an SQL script to look up each domains 
user count and update with real numbers. I'm hoping this isn't an 
indication of a larger issue that I'm not aware of.


I'll try to explain, but french native, sorry


1st
QMT build vpopmail with disable-users-big-dir

2nd
when disable-users-big-dir is on
the function which increase cur_users in dir_control is not called
but the function which decrease yes

3rd
vqadmin or its cgi was built with 32bits binary integer instead of
signed integer
which maximum value is 9
mod_domain will throw an error when cur_users is  to this value
this error is not catched therefore view_domain is empty

4th
the decrease function simply do a -- to cur_users without controlling 
its value

as increase function wasnot called, this value is 0
but 0 -1 makes an overflow and it is system maximum value which is 
returned

4294967295 for a 32bits os
1844674407370955161 for a 64bits os

5th
cur_users field is a signed integer
therefore mysql reduces these huge values to its maximum or 2147483647

if you have less than 8/16 users
the less effort solution is to change cur_users type from signed
integer to signed/unsigned medium integer
their maximum values |8388607/|||16777215| won't exceed cgi or vqadmin
maximum value

that's all folks
xaf

|

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Domain keys error bounce with list messages

[Fabian Santiago]

I've received an email from the qmailtoaster ezmlm system stating that messages 
to me have bounced with this error:

554 DomainKeys verify status: no key   (#5.3.0)

Anyone else stumble upon this? Do I just need to white list the toaster list 
address? Thanks. Also, I have received list emails repeatedly so this struck me 
as odd. 

Fabian s. 


Sent from my Verizon Wireless 4G LTE Smartphone

Re: [qmailtoaster] DKIM records reported as neutral/bad format by GMAIL

[Fabian Santiago]

Thank you Gilbert. I had already tried that but I still get the same result. I 
believe it's in the structure of my dns record, like I'm missing quotes or 
something but I'm unsure. Also, power admin won't let me add quotes to records 
on either end of the total string. So I'm unsure 

Fabian s. 



Sent from my Verizon Wireless 4G LTE Smartphone

 Original message 
From: Gilbert T. Gutierrez, Jr. mailing-li...@phoenixinternet.net 
Date: 07/18/2013  1:55 PM  (GMT-05:00) 
To: qmailtoaster-list@qmailtoaster.com 
Subject: Re: [qmailtoaster] DKIM records reported as neutral/bad format by 
GMAIL 
 
I just saw your message and I do not know if you solved it or not.

I recently had an issue with my keys and Gmail. They increased the key 
length requirement and mine were being rejected because of that. Below 
is an article of this.

http://blog.returnpath.com/blog/ken-takahashi/google-doubles-down-on-weak-dkim-keys-what-you-need-to-do-now-to-be-compliant

After updating my keys to a longer length, I had to wait for google to 
update their cache servers so that they saw the new key. I always make 
sure the key can be seen by google's servers by querying 8.8.8.8 and 
8.8.4.4 for the text record. Also, I had to verify that I was using the 
correct selector in my signconf.xml (I created a new selector with the 
new key so that I could use the shorter key until I saw that the new key 
had propagated).

Gilbert

On 7/15/2013 7:49 AM, fsanti...@garden-life.org wrote:
 Hello,

 I have setup DKIM signing on my qmail system using these instructions:

 http://wiki.qmailtoaster.com/index.php/How_to_Setup_DKIM_with_Qmail_Toaster 


 It seems to be working fine (all msgs are signed in the header). Yet, 
 every time I send email to a gmail address, Google reports:

 dkim=neutral (bad format)

 I run my own DNS using powerdns, so i have total control over my dns 
 records. What should I be looking at? My DNS records look like this 
 for DKIM:

 dkim1._domainkey.my domain.com

 k=rsa; 
 p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDG0GQHEGbLG0yEQvPamMxaC4uIBCC3LvMkI7JNXn7u6G4AnP2/8oCpCh1BP8JL0x4E1PGo0+3uVMahAAr1YYqVPFZSyAlS5cvfJBJv0NiZbAceLFF16Em3qP1T+Rfx/u5huqwLNMT1FEeA5w10A2K7Tl0A8zOnihH7Zx8ooWI0ewIDAQAB

 Thanks everyone on the list for your continued support.

 Fabian S.


 -
 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] How to make more than one domain into one server

[Fabian Santiago]

If you just follow the qmail toaster instructions online, it explains 
everything you're asking for step by step on how to set up. And the qmt scripts 
do an awesome job of automating most of the install for you. 

Qmail includes SMTP, so I'm unsure what you're asking for there. 

Personally, I'd recommend using roundcube instead of squirrelmail. You can 
google instructions on how to do it and if I'm not mistaken, qmt may already 
have a scripted procedure for setting up roundcube. I forget now how I got mine 
setup. But if you google it, it's out there. 

Fabian s. 


Sent from my Verizon Wireless 4G LTE Smartphone

 Original message 
From: ChandranManikandan kand...@gmail.com 
Date: 07/17/2013  5:12 AM  (GMT-05:00) 
To: qmailtoaster-list@qmailtoaster.com 
Subject: Re: [qmailtoaster] How to make more than one domain into one server 
 
Hi Bharath,
Thanks for your help. But am looking need to add more than one domain in one 
server and also squirrelmail and smtp.


On Wed, Jul 17, 2013 at 12:23 PM, Bharath Chari qmailtoas...@arachnis.com 
wrote:
On Wednesday 17 July 2013 09:35 AM, ChandranManikandan wrote:
Hi All,
Currently am using Centos 5.7 with qmailtoaster.
I have use one domain with this server and dns host from another provider.
I want to register one more domain and all emails need to be configure with the 
same server.
Can you please help me how to do that more than one domain configure in single 
server as well smtp and squirrelmail.
Is this what you are looking for?

http://wiki.qmailtoaster.com/index.php/Domains

Bharath



-- 
Thanks  Best Regards,
Manikandan.C

RE: [qmailtoaster] mailing list

[Fabian Santiago]

No its qmail admin that does that. He's right. 


Sent from my Verizon Wireless 4G LTE Smartphone

 Original message 
From: mattias m...@mjw.se 
Date: 07/17/2013  2:58 PM  (GMT-05:00) 
To: qmailtoaster-list@qmailtoaster.com 
Subject: RE: [qmailtoaster] mailing list 
 
no!
think yo meen vqadmin or what is  it have for name

From: Kelly Cobean [mailto:kcob...@vipercrazy.com] 
Sent: den 17 juli 2013 20:56
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] mailing list

That's what qmailadmin should do.  You can manage lists, accounts, robots all 
from qmailadmin.

On 07/17/2013 14:48, David wrote:

Ok,
 Is there a web/PHP/mysql system out there to add and remove customers from the 
list from an admin side?
So for example if we have a customer who is no longer on our network we can 
just simply remove them,
Thanks
Dave

On 07/17/2013 11:28 AM, David wrote:
Hi All, 

I am wanting to configure a mailing list on our toaster box for our customer 
base and I need a good 
opt out web interface. 
The list will be private only to our customers and I want to give them an opt 
out link if they want off the 
list. 

Any ideas,thoughts or suggestions welcome. 

thanks 
Dave 



-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
 

Re: [qmailtoaster] Dspam with QMT / per-user settings

[Fabian Santiago]

Thank you. But how does dspam know to check those email boxes? 

Fabian s. 


Sent from my Verizon Wireless 4G LTE Smartphone

 Original message 
From: P.V.Anthony pvant...@singnet.com.sg 
Date: 07/11/2013  9:29 PM  (GMT-07:00) 
To: qmailtoaster-list@qmailtoaster.com 
Subject: Re: [qmailtoaster] Dspam with QMT / per-user settings 
 
On 12/07/2013 12:13, Fabian Santiago wrote:

 1.) any way to implement the ability for users to set their own settings?

There is no much setting for the user. Sometimes it is better that the 
user does not mess around with the setting.

If you are try out, use TOE. This has given me very good results.

 2.) best method of training dspam and possibly automating it by placing
 spam /ham in certain folders or mailboxes?

Yes. Dovecat can but I have not tried it yet. Currently we just email to 
s...@example.com and nots...@example.com

 SA is also there as part of the default qmt install. I am just
 experimenting with dspam. Thanks everyone.

I like dspam more.

P.V.Anthony


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Dspam with QMT / per-user settings

[Fabian Santiago]

Hello, 

I've recently set up dspam on my qmt system using these instructions:

http://qmail.jms1.net/dspam/

Now, i have a couple questions:

1.) any way to implement the ability for users to set their own settings? 

2.) best method of training dspam and possibly automating it by placing spam 
/ham in certain folders or mailboxes? 

SA is also there as part of the default qmt install. I am just experimenting 
with dspam. Thanks everyone. 

Fabian s. 


Sent from my Verizon Wireless 4G LTE Smartphone

[qmailtoaster] Qmail toaster development plans

[Fabian Santiago]

Are there any current plans for releasing a new toaster build? I'm not looking 
for anything in particular nor do i have any problems. Just curious. 

Fabian s. 


Sent from my Verizon Wireless 4G LTE Smartphone