Re: [qmailtoaster] Roundcube - Out of office / auto reply

[Remo Mattei]

Hi Eric,
was just to talk to him in Italian :). I had something in the old days that I 
used a plugin to do that. but with the new server I did end up removing as many 
are using the qmailadmin OOO.

Remo

—
Ciao Remo

> On Monday, May 20, 2024 at 5:48 PM, Remo Mattei  (mailto:r...@mattei.org)> wrote:
> Hi Eric,
> was just to talk to him in Italian :). I had something in the old days that I 
> used
>
> —
> Ciao Remo
>
> > On Monday, May 20, 2024 at 1:40 PM, Eric Broch  > (mailto:ebr...@whitehorsetc.com)> wrote:
> >
> > I'd like to keep this on the mailing list so that other's may be helped. Do 
> > you have a solution, Remo?
> >
> >
> > On 5/20/2024 2:46 AM, Remo Mattei wrote:
> > > Cesare ping me off line. Ciao
> > >
> > > Remo
> > >
> > > > On May 20, 2024, at 9:42 AM, Cinghiuz  
> > > > (mailto:cingh...@libero.it) wrote:
> > > > Hi again,
> > > >
> > > > I received the reply but in /var/log/dovecot-lda/dovecot-lda-errors.log 
> > > > appears this error:
> > > >
> > > > May 20 09:29:32 lda(u...@mydomain.com 
> > > > (mailto:u...@mydomain.com))<3016541><65B9Drn7SmZdBy4ACT0nHg>: Error: 
> > > > sieve: Execution of script 
> > > > /home/vpopmail/domains/mydomain.com/user/.dovecot.sieve was aborted due 
> > > > to temporary failure (user logfile 
> > > > /home/vpopmail/domains/mydomain.com/user/.dovecot.sieve.log may reveal 
> > > > additional details)
> > > >
> > > > If I open the this second logfile I see this in case of forward rule:
> > > > sieve: info: started log at 2024-05-20 09:29:32 +0200.
> > > > error: From: 
> > > > (mailto:sen...@otherdomain.com)- :: Subject: :: 
> > > > Status: > > >  (mailto:ot...@mydomain.com): Failed to execute 
> > > > sendmail (temporary failure)> :: 
> > > > MsgID:< 
> > > > (mailto:jqimuffsgb1x8mdrznfrxi6z6wiy9y3uaxji3o...@otherdomain.com)> :: 
> > > > Size<416097> :: vSize<421509>.
> > > >
> > > > Or this in case of reply rule:
> > > > sieve: info: started log at 2024-05-20 09:17:37 +0200.
> > > > error: From: 
> > > > (mailto:sen...@otherdomain.it)- :: Subject: :: 
> > > > Status: > > > sen...@otherdomain.it (mailto:sen...@otherdomain.it):  > > > execute sendmail> (temporary error)> :: 
> > > > MsgID:< 
> > > > (mailto:bc9de613-f4d1-42a4-beb9-e394ca5b2...@otherdomain.it)> :: 
> > > > Size<2912> :: vSize<2986>.
> > > >
> > > > Any idea?
> > > >
> > > > Cesare
> > > >
> > > > Il 18/05/2024 13:46, Eric Broch ha scritto:
> > > > >
> > > > > Are you using dovecot lda ?
> > > > >
> > > > >
> > > > > LDA - QmailToaster (http://wiki.qmailtoaster.org/index.php?title=LDA)
> > > > >
> > > > > On 5/18/2024 1:30 AM, Cinghiuz wrote:
> > > > > > Plugins installed are: archive, carddav, filesystem_attachments, 
> > > > > > jqueryui, managesieve, password and zipdownload.
> > > > > >
> > > > > > I guess it is managesieve that manage the filters
> > > > > >
> > > > > > Cesare
> > > > > >
> > > > > > Il 18/05/2024 04:55, Eric Broch ha scritto:
> > > > > > >
> > > > > > > Is this a plugin for roundcubemail ?
> > > > > > >
> > > > > > >
> > > > > > > I can't find the setting 'filter action' in my roundcube setup.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 5/17/2024 10:29 AM, Cinghiuz wrote:
> > > > > > > > Hi list,
> > > > > > > >
> > > > > > > > I have a Rocky Linux 8.6 with QMT up and running with 
> > > > > > > > Roundcube, Dovecot and Vpopmail.
> > > > > > > >
> > > > > > > > Through Roundcube webmail interface I set up a filter with 
> > > > > > > > action "Answer with a message", I click on Save, it says the 
> > > > > > > > filter it is saved and of course it's enabled, but if I write 
> > > > > > > > to this address I didn't receive a reply.
> > > > > > > >
> > > > > > > > I checked in /var/log folders, but I didn't find anything 
> > > > > > > > helpful.
> > > > > > > >
> > > > > > > > Someone could help me to fix this problem?
> > > > > > > >
> > > > > > > > Thanks to everybody!
> > > > > > > >
> > > > > > > > Cesare
> > > > > > > >
> > > > > >
> > > >
> > >

Re: [qmailtoaster] Roundcube - Out of office / auto reply

[Remo Mattei]

Cesare ping me off line. Ciao 

Remo 

> On May 20, 2024, at 9:42 AM, Cinghiuz  wrote:
> 
> Hi again,
> 
> I received the reply but in /var/log/dovecot-lda/dovecot-lda-errors.log 
> appears this error:
> 
> May 20 09:29:32 lda(u...@mydomain.com 
> )<3016541><65B9Drn7SmZdBy4ACT0nHg>: Error: sieve: 
> Execution of script /home/vpopmail/domains/mydomain.com/user/.dovecot.sieve 
> was aborted due to temporary failure (user logfile 
> /home/vpopmail/domains/mydomain.com/user/.dovecot.sieve.log may reveal 
> additional details)
> 
> If I open the this second logfile I see this in case of forward rule:
> sieve: info: started log at 2024-05-20 09:29:32 +0200.
> error: From: 
> - :: Subject: :: 
> Status: 
> : Failed to execute sendmail (temporary failure)> 
> :: MsgID:< 
> > :: 
> Size<416097> :: vSize<421509>.
> 
> Or this in case of reply rule:
> sieve: info: started log at 2024-05-20 09:17:37 +0200.
> error: From: 
> - :: Subject: :: 
> Status: sen...@otherdomain.it :  sendmail> (temporary error)> :: 
> MsgID:< 
> > :: Size<2912> 
> :: vSize<2986>.
> 
> Any idea?
> 
> Cesare
> 
> Il 18/05/2024 13:46, Eric Broch ha scritto:
>> Are you using dovecot lda ?
>> 
>> LDA - QmailToaster 
>> On 5/18/2024 1:30 AM, Cinghiuz wrote:
>>> Plugins installed are: archive, carddav, filesystem_attachments, jqueryui, 
>>> managesieve, password and zipdownload.
>>> 
>>> I guess it is managesieve that manage the filters
>>> 
>>> Cesare
>>> 
>>> Il 18/05/2024 04:55, Eric Broch ha scritto:
 Is this a plugin for roundcubemail ?
 
 I can't find the setting 'filter action' in my roundcube setup.
 
 
 
 On 5/17/2024 10:29 AM, Cinghiuz wrote:
> Hi list,
> 
> I have a Rocky Linux 8.6 with QMT up and running with Roundcube, Dovecot 
> and Vpopmail.
> 
> Through Roundcube webmail interface I set up a filter with action "Answer 
> with a message", I click on Save, it says the filter it is saved and of 
> course it's enabled, but if I write to this address I didn't receive a 
> reply.
> 
> I checked in /var/log folders, but I didn't find anything helpful.
> 
> Someone could help me to fix this problem?
> 
> Thanks to everybody!
> 
> Cesare
> 
>>> 
> 

Re: [qmailtoaster] New Cipher error with last update

[Remo Mattei]

that’s one option as it now automatically is set

—
Ciao Remo

> On Tuesday, May 07, 2024 at 10:06 AM, Philip Nix Guru  (mailto:phi...@ows.ch)> wrote:
>
> Hello
>
>
> removing
>
>
>
> tls-cipher-list=TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
>  from spamdyke.conf maybe ?
>
>
>
>
>
> On 5/7/24 18:37, Remo Mattei wrote:
> > I had the same issue I will send you the change you need to apply.
> >
> > Inviato da iPhone
> >
> > > Il giorno 7 mag 2024, alle ore 09:33, Philip Nix Guru  
> > > (mailto:phi...@ows.ch) ha scritto:
> > >
> > > 
> > >
> > > Hello
> > >
> > >
> > > with the last update
> > >
> > >
> > > I am getting a lot of those errors :
> > >
> > >
> > >
> > >
> > >
> > >
> > > spamdyke[3336556]: ERROR(tls_init_inner()@tls.c:299): unable to set 
> > > SSL/TLS cipher list: 
> > > TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256:
> > >  Operation failed but no error was reported by the SSL/TLS library, 
> > > error:1410D0B9:SSL routines:SSL_CTX_set_cipher_list:no cipher match
> > >
> > >
> > >
> > >
> > >
> > >
> > > just for the info
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
>

Re: [qmailtoaster] New Cipher error with last update

[Remo Mattei]

I had the same issue I will send you the change you need to apply. 

Inviato da iPhone

> Il giorno 7 mag 2024, alle ore 09:33, Philip Nix Guru  ha 
> scritto:
> 
> 
> Hello
> 
> with the last update
> 
> I am getting a lot of those errors :
> 
> 
> 
> spamdyke[3336556]: ERROR(tls_init_inner()@tls.c:299): unable to set SSL/TLS 
> cipher list: 
> TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256: 
> Operation failed but no error was reported by the SSL/TLS library, 
> error:1410D0B9:SSL routines:SSL_CTX_set_cipher_list:no cipher match
> 
> 
> 
> just for the info
> 
> 

Re: [qmailtoaster] Re: Rocky9 - new mailserver setup - off topic

[Remo Mattei]

For the longest time I used sources but was always too painful when there are 
dependencies and when bugs are discovered not enough time to babysit it. 

My 2 cents on that. 
Inviato da iPhone

> Il giorno 14 apr 2024, alle ore 20:41, Jeff Koch  
> ha scritto:
> 
>  I may have resolved this. I did the Rocy9 distro install of apache and 
> copied the mod_http2.so file over to our install of apache. Seems to work (no 
> errors) but I won't know for sure until we setup Lets Encrypt SSL certbot 
> tomorrow
> 
> Jeff
> 
>> On 4/14/2024 3:11 PM, Jeff Koch wrote:
>> 
>> Hi - we're setting up a new mailserver with Rocky 9 and the learning curve 
>> is slow as is usual with the first time with a new distro.
>> 
>> Anyway because our various scripts look for apache at /usr/local/apache/ 
>> we've decided to compile our own binary with the latest apache and have run 
>> into trouble / errors related to 'nghttp2'.
>> 
>> We did download, compile and install the latest nghttp2-1.61.0 from github. 
>> The configure and make went well and http1.1 works but apache generates the 
>> following error when we activate  mod_http2
>> 
>>  (Cannot load modules/mod_http2.so into server: 
>> /usr/local/apache2/modules/mod_http2.so: undefined symbol: 
>> nghttp2_option_set_no_rfc9113_leading_and_trailing_ws_validation)
>> 
>> If anyone on the list has compiled their own httpd 2.4.59 with Rocky 9 would 
>> you mind sharing the details ?
>> 
>> Thanks, Jeff Koch
>> 
>> 
> 

Re: [qmailtoaster] database query!

[Remo Mattei]

My question is why editing the c code?

Use the -q and specify the quota you want to use for the user when executing 
the vadduser command

vadduser: usage: [options] email_address [passwd]
options: -v (print the version)
 -q quota_in_bytes (sets the users quota, use NOQUOTA for unlimited)
 -c comment (sets the gecos comment field)
 -e standard_encrypted_password
 -n no_password
 -r[len] (generate a len (default 8) char random password)

vadduser -q NOQUOTA d...@demo.org
Please enter password for d...@demo.org:
enter password again:
Wed Apr 10 10:44:45 AM MDT 2024 > /root
demo.org vuserinfo d...@demo.org
name:   demo
passwd: $3$jO09Si5u$P1lesSv7jPsR4HEqMBMFr0
clear passwd: demo
comment/gecos: demo
uid:0
gid:0
flags:  0
gecos: demo
limits: No user limits set.
dir:   /home/vpopmail/domains/demo.org/demo
quota: NOQUOTA
usage: NOQUOTA
account created: Wed Apr 10 10:44:45 2024
last auth: Never logged in

Just my 2 cents here.

> On Apr 10, 2024, at 9:03 AM, Tony White  wrote:
> 
> Hi Eric,
>   I am actually reading from the old server tables and inserting into
> the new one. Hence the reason for asking. I do really want to mash the
> add of ,4000c to the code. I will test it out tomorrow.
> 
> Thank you.
> 
>  regards
> Anthony White
> On 11/4/24 02:01, Eric Broch wrote:
>>  /home/vpopmail/bin/vmoduser -q NOQUOTA u...@domain.tld 
>>  
>> 
>> On 4/10/2024 9:57 AM, Tony White wrote:
>>> Eric, 
>>>   That suggests I can update the table directly and not 
>>> actually add the second element ,4000C. Is this assumption 
>>> correct? I need to update clients with their current allocation 
>>> from the old server. 
>>> 
>>> regards 
>>> Anthony White 
>>> On 11/4/24 01:37, Eric Broch wrote:
 pw_shell=##S, #C 
 
 ##S = default quota bytes 
 
 #C = max msg quota 
 
 Here is the actual code when adding a user if anyone reads 'c' and is 
 interested. 
 
   if (limits.defaultquota > 0) { 
 if (limits.defaultmaxmsgcount > 0) 
   snprintf (quota, sizeof(quota), "%lluS,%lluC", limits.defaultquota, 
 limits.defaultmaxmsgcount); 
 else 
   snprintf (quota, sizeof(quota), "%lluS", limits.defaultquota); 
   } else { 
 if (limits.defaultmaxmsgcount > 0) 
   snprintf (quota, sizeof(quota), "%lluC", limits.defaultmaxmsgcount); 
 else 
   strcpy (quota, "NOQUOTA"); 
   } 
 
 
 On 4/10/2024 9:11 AM, Tony White wrote:
> Is it possible it is a max file handle count? 
> 4000c = 16384d 
> I also do not understand why there is and S on 
> the first value. 
> 
> regards 
> Anthony White 
> On 10/4/24 23:40, Qmail wrote:
>> Ahh, then I also get the ,4000C - hmmm 
>> 
>> And when I look up the user in vqadmin it's shown under the column quota 
>> as  4091324,4000C !! 
>> 
>> 
>> Well I admit You did start out with a good question 
>> 
>> Cheers 
>> Finn 
>> 
>> Den 10-04-2024 kl. 15:17 skrev Tony White:
>>> Okay but I used the default values. 
>>> vadduser f...@ycs.com.au  dickerydock 
>>> I did not specify the allocation of space 
>>> 
>>> regards 
>>> Anthony White 
>>> 
>>> On 10/4/24 22:04, Qmail wrote:
 Hi again 
 
 Hmm 
 
 I tried this 
 
 ./vadduser -q 4 test1@mydomain test 
 
 and 
 
 ./vadduser -q NOQUOTA test@mydomain test 
 
 
 and there is NO ,4000C in my database 
 
 
 Whats on You vadduser line ? and I can try that if You want 
 
 /Finn 
 
 
 
 Den 10-04-2024 kl. 13:24 skrev Tony White:
> Hi, 
>Thanks for the response but all the users were 
> created with vadduser. 
> 
> regards 
> Anthony White 
> 
> On 10/4/24 19:08, Qmail wrote:
>> Hi Tony. 
>> 
>> Just checked my database and I do not have that value in any of my 
>> entries. 
>> 
>> 
>> but ',4000C' seems to me as a value from a list where values was 
>> inserted into the new database - just a guess ? 
>> 
>> 
>> I'm running latest qmail on a Rocky 9 latest and greatest 
>> 
>> 
>> /Finn 
>> 
>> 
>> Den 10-04-2024 kl. 10:38 skrev Tony White:
>>> Hi Folks, 
>>>I have a question that I hope someone can answer please. 
>>> Below are entries from the old and new database. 
>>> What is the meaning of second numeric value 4000C in the new table? 
>>> Every entry has it but the first changes with the allocation of 
>>> space. 
>>> The second does not. Trying to move 

Re: [qmailtoaster] database query!

[Remo Mattei]

The quota is set by default 

Remo
Inviato da iPhone

> Il giorno 10 apr 2024, alle ore 06:41, Qmail  ha scritto:
> 
> Ahh, then I also get the ,4000C - hmmm
> 
> And when I look up the user in vqadmin it's shown under the column quota as  
> 4091324,4000C !!
> 
> 
> Well I admit You did start out with a good question
> 
> Cheers
> Finn
> 
>> Den 10-04-2024 kl. 15:17 skrev Tony White:
>> Okay but I used the default values.
>> vadduser f...@ycs.com.au dickerydock
>> I did not specify the allocation of space
>> regards
>> Anthony White
>>> On 10/4/24 22:04, Qmail wrote:
>>> Hi again
>>> 
>>> Hmm
>>> 
>>> I tried this
>>> 
>>> ./vadduser -q 4 test1@mydomain test
>>> 
>>> and
>>> 
>>> ./vadduser -q NOQUOTA test@mydomain test
>>> 
>>> 
>>> and there is NO ,4000C in my database
>>> 
>>> 
>>> Whats on You vadduser line ? and I can try that if You want
>>> 
>>> /Finn
>>> 
>>> 
>>> 
>>> Den 10-04-2024 kl. 13:24 skrev Tony White:
 Hi,
Thanks for the response but all the users were
 created with vadduser.
 
 regards
 Anthony White
 
 On 10/4/24 19:08, Qmail wrote:
> Hi Tony.
> 
> Just checked my database and I do not have that value in any of my 
> entries.
> 
> 
> but ',4000C' seems to me as a value from a list where values was inserted 
> into the new database - just a guess ?
> 
> 
> I'm running latest qmail on a Rocky 9 latest and greatest
> 
> 
> /Finn
> 
> 
> Den 10-04-2024 kl. 10:38 skrev Tony White:
>> Hi Folks,
>>I have a question that I hope someone can answer please.
>> Below are entries from the old and new database.
>> What is the meaning of second numeric value 4000C in the new table?
>> Every entry has it but the first changes with the allocation of space.
>> The second does not. Trying to move clients from old database to new.
>> 
>> TIA :)
>> 
>> old database vpopmail
>> 
>> +---+-+
>> | pw_name   | pw_shell|
>> +---+-+
>> | loanapples| 5000|
>> 
>> new database vpopmail.vpopmail
>> 
>> +--+-+
>> | pw_name  | pw_shell|
>> +--+-+
>> | 1oanapples   | 41943040S,4000C |
>> 
>> 
>> --
>> regards
>> Anthony White
>> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 
> 
 
>>> 
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: I messed up DKIM setup

[Remo Mattei]

Wow did you backup the /var/qmail? Not sure why you removed it you could in case reinstall on top but without a backup I would have not run those commands My 2 cents. Inviato da iPhoneIl giorno 7 apr 2024, alle ore 11:32, Biju Jose  ha scritto:






I have done 



rpm -e --nodeps qmail


yum install qmail


 restored .rpmsave files in /var/qmail/control 





Now I am unable to login to existing domains . But I can create and login to a test domain. How do I connect to existing domains? 

Need some urgent help please.




Biju Jose


From: Biju Jose 
Sent: 07 April 2024 21:44
To: qmailtoaster-list@qmailtoaster.com 
Subject: Re: [qmailtoaster] Re: I messed up DKIM setup
 




#ls -l /var/qmail/bin

total 1512

-rwxr-xr-x 1 root   qmail  14552 Sep 10  2019 bouncesaying

-rwxr-xr-x 1 root   qmail  31224 Sep 10  2019 condredirect

-rwxr-xr-x 1 root   qmail   1087 Sep 10  2019 config-fast

-rwxr-xr-x 1 root   qmail    126 Sep 10  2019 datemail

-rw--- 1 root   root   11430 Apr  7 20:20 DEADJOE

-rwxr-xr-x 1 root   qmail    928 Sep 10  2019 dh_key

-rwxr-xr-x 1 root   root    2777 Apr 30  2018 dkimverify.pl

-rwxr-xr-x 1 root   qmail    114 Sep 10  2019 elq

-rwxr-xr-x 1 root   qmail  14552 Sep 10  2019 except

-rwxr-xr-x 1 root   qmail  31224 Sep 10  2019 forward

-rwxr-xr-x 1 root   qmail  26888 Sep 10  2019 instcheck

-rwxr-xr-x 1 root   qmail  26952 Sep 10  2019 maildir2mbox

-rwxr-xr-x 1 root   qmail  14568 Sep 10  2019 maildirmake

-rwxr-xr-x 1 root   qmail  22888 Sep 10  2019 maildirwatch

-rwxr-xr-x 1 root   qmail    179 Sep 10  2019 mailsubj

-rwxr-xr-x 1 root   qmail   8259 Sep 10  2019 makecert.sh

-rwxr-xr-x 1 root   qmail    115 Sep 10  2019 pinq

-rwxr-xr-x 1 root   qmail  18856 Sep 10  2019 predate

-rwxr-xr-x 1 root   qmail  18792 Sep 10  2019 preline

-rwxr-xr-x 1 root   qmail    115 Sep 10  2019 qail

-rwxr-xr-x 1 root   qmail  18760 Sep 10  2019 qbiff

-rwxr-xr-x 1 root   qmail  18744 Sep 10  2019 qmail-badloadertypes

-rwxr-xr-x 1 root   qmail  18744 Sep 10  2019 qmail-badmimetypes

-rwx--x--x 1 root   qmail  14712 Sep 10  2019 qmail-clean

-rws--x--x 1 qmailq qmail  52144 Sep 10  2019 qmail-dk

-rwx--x--x 1 root   qmail  10480 Sep 10  2019 qmail-getpw

-rwxr-xr-x 1 root   qmail  51768 Sep 10  2019 qmail-inject

-rwx--x--x 1 root   qmail  64184 Sep 10  2019 qmail-local

-rwx-- 1 root   qmail  22904 Sep 10  2019 qmail-lspawn

-rwx-- 1 root   qmail  18744 Sep 10  2019 qmail-newmrh

-rwx-- 1 root   qmail  14648 Sep 10  2019 qmail-newu

-rwx--x--x 1 root   qmail  22976 Sep 10  2019 qmail-pw2u

-rwxr-xr-x 1 root   qmail  18816 Sep 10  2019 qmail-qmqpc

-rwxr-xr-x 1 root   qmail  22904 Sep 10  2019 qmail-qmqpd

-rwxr-xr-x 1 root   qmail  31096 Sep 10  2019 qmail-qmtpd

-rwxr-xr-x 1 root   qmail  22840 Sep 10  2019 qmail-qread

-rwxr-xr-x 1 root   qmail    371 Sep 10  2019 qmail-qstat

-rwx--x--x 1 root   root   27104 Apr  7 21:25 qmail-queue

lrwxrwxrwx 1 root   root      26 Apr  7 18:58 qmail-queue.1 -> /var/qmail/bin/qm                                ail-queue

-rws--x--x 1 qmailq qmail  27104 Sep 10  2019 qmail-queue.orig

-rwsrwxrwx 1 qmailq qmail    488 Jul 18  2018 qmail-queue.pl.sh

-rwx--x--x 1 root   qmail  52056 Apr  7 21:10 qmail-remote

-rw-r--r-- 1 root   root    7545 Apr  7 20:59 qmail-remote~

-rwx--x--x 1 root   qmail   7554 Apr  7 20:51 qmail-remote.0

-rwx--x--x 1 root   qmail  52056 Sep 10  2019 qmail-remote.org

-rwxrwxrwx 1 root   qmail   7545 Apr  7 19:28 qmail-remove.eric

-rwx--x--x 1 root   qmail  18768 Sep 10  2019 qmail-rspawn

-rwx--x--x 1 root   qmail  6 Sep 10  2019 qmail-send

-rwxr-xr-x 1 root   qmail  22856 Sep 10  2019 qmail-showctl

-rwxr-xr-x 1 root   qmail 205752 Sep 10  2019 qmail-smtpd

-rwx-- 1 root   qmail  10488 Sep 10  2019 qmail-start

-rwxr-xr-x 1 root   qmail  14584 Sep 10  2019 qmail-tcpok

-rwxr-xr-x 1 root   qmail  14616 Sep 10  2019 qmail-tcpto

-rwxr-xr-x 1 root   qmail  31192 Sep 10  2019 qreceipt

-rwxr-xr-x 1 root   qmail  14632 Sep 10  2019 qsmhook

-rwxr-xr-x 1 root   root    3820 May  6  2019 rcptcheck-overlimit.sh

-rwxr-xr-x 1 root   qmail  14616 Sep 10  2019 sendmail

-rws--x--x 1 clamav root   34774 Apr  7  2016 simscan

-rwsr-xr-x 1 root   root   24461 Apr  7  2016 simscanmk

-rwxr-xr-x 1 root   qmail  35560 Sep 10  2019 spfquery

-rwx--x--x 1 root   qmail  10536 Sep 10  2019 splogger

-rwxr-xr-x 1 root   qmail  31224 Sep 10  2019 srsfilter

-rwxr-xr-x 1 root   qmail  26920 Sep 10  2019 tcp-env

-rwxr-xr-x 1 root   root     618 Dec 24  2013 update-simscan


From: Eric Broch 
Sent: 07 April 2024 21:40
To: qmailtoaster-list@qmailtoaster.com 
Subject: Re: [qmailtoaster] Re: I messed up DKIM setup
 


All you should have to do is move qmail-remote (original) back to qmail-remote


What's in /var/qmail/bin


# ls -l  /var/qmail/bin


If there is a symbolic link to qmail-remote (unlink qmail-remote).
do you have qmail-remote.orig ???



On 4/7/2024 9:47 AM, Biju Jose wrote:



How do I reverse  steps 11 and 12? 

Re: [qmailtoaster] block send email for internal domain for all my users

[Remo Mattei]

https://briansnelson.com/How_to_disable_qmail_vpopmail_email_userInviato da iPhoneIl giorno 7 apr 2024, alle ore 00:51, Remo Mattei  ha scritto:SiInviato da iPhoneIl giorno 7 apr 2024, alle ore 00:29, Giuseppe Perna  ha scritto:Good morning everyone,I have a domain in my qmailtoaster server, mydomain.it, which I am migrating to another server, I would like to block my users and block sending with webmail and with pop3 and imap4,possible?Thank you#rpm -qa qmail*qmail-pop3d-toaster-1.03-1.3.22qmailtoaster-plus.repo-0.2-2qmailmrtg-toaster-4.2-1.3.7qmailtoaster-plus-0.3.2-1.4.19qmail-toaster-1.03-1.3.22qmailadmin-toaster-1.2.16-1.4.0[root@posta ~]# rpm -qa *toaster*ucspi-tcp-toaster-0.88-1.3.9maildrop-toaster-2.0.3-1.3.8control-panel-toaster-0.5-1.4.0libdomainkeys-toaster-0.68-1.3.6qmail-pop3d-toaster-1.03-1.3.22squirrelmail-toaster-1.4.20-1.3.17qmailtoaster-plus.repo-0.2-2vpopmail-toaster-5.4.33-1.4.0daemontools-toaster-0.76-1.3.6libsrs2-toaster-1.0.18-1.3.6courier-authlib-toaster-0.59.2-1.3.10ripmime-toaster-1.4.0.6-1.3.6autorespond-toaster-2.0.5-1.4.0courier-imap-toaster-4.1.2-1.3.10isoqlog-toaster-2.1-1.3.7maildrop-toaster-devel-2.0.3-1.3.8qmailmrtg-toaster-4.2-1.3.7send-emails-toaster-0.5-1.4.0spamassassin-toaster-3.3.2-1.4.3vqadmin-toaster-2.3.7-1.4.1qmailtoaster-plus-0.3.2-1.4.19ezmlm-toaster-0.53.324-1.3.6qmail-toaster-1.03-1.3.22ezmlm-cgi-toaster-0.53.324-1.3.6qmailadmin-toaster-1.2.16-1.4.0simscan-toaster-1.4.0-1.4.0clamav-toaster-0.97.6-1.4.2Please help me.thanks

Re: [qmailtoaster] block send email for internal domain for all my users

[Remo Mattei]

SiInviato da iPhoneIl giorno 7 apr 2024, alle ore 00:29, Giuseppe Perna  ha scritto:Good morning everyone,I have a domain in my qmailtoaster server, mydomain.it, which I am migrating to another server, I would like to block my users and block sending with webmail and with pop3 and imap4,possible?Thank you#rpm -qa qmail*qmail-pop3d-toaster-1.03-1.3.22qmailtoaster-plus.repo-0.2-2qmailmrtg-toaster-4.2-1.3.7qmailtoaster-plus-0.3.2-1.4.19qmail-toaster-1.03-1.3.22qmailadmin-toaster-1.2.16-1.4.0[root@posta ~]# rpm -qa *toaster*ucspi-tcp-toaster-0.88-1.3.9maildrop-toaster-2.0.3-1.3.8control-panel-toaster-0.5-1.4.0libdomainkeys-toaster-0.68-1.3.6qmail-pop3d-toaster-1.03-1.3.22squirrelmail-toaster-1.4.20-1.3.17qmailtoaster-plus.repo-0.2-2vpopmail-toaster-5.4.33-1.4.0daemontools-toaster-0.76-1.3.6libsrs2-toaster-1.0.18-1.3.6courier-authlib-toaster-0.59.2-1.3.10ripmime-toaster-1.4.0.6-1.3.6autorespond-toaster-2.0.5-1.4.0courier-imap-toaster-4.1.2-1.3.10isoqlog-toaster-2.1-1.3.7maildrop-toaster-devel-2.0.3-1.3.8qmailmrtg-toaster-4.2-1.3.7send-emails-toaster-0.5-1.4.0spamassassin-toaster-3.3.2-1.4.3vqadmin-toaster-2.3.7-1.4.1qmailtoaster-plus-0.3.2-1.4.19ezmlm-toaster-0.53.324-1.3.6qmail-toaster-1.03-1.3.22ezmlm-cgi-toaster-0.53.324-1.3.6qmailadmin-toaster-1.2.16-1.4.0simscan-toaster-1.4.0-1.4.0clamav-toaster-0.97.6-1.4.2Please help me.thanks

Re: [qmailtoaster] send email all user

[Remo Mattei]

I use vpopbull all the time it works to send to a domain.  Super simple. 

Remo 
Inviato da iPhone

> Il giorno 3 apr 2024, alle ore 08:26, Andreas  ha scritto:
> 
> The tool is vpopbull, at least it was part of vpopmail.
> That sends email to a domain.
> 
> Andreas
> 
>> Am 03.04.24 um 17:23 schrieb Eric Broch:
>> I thought I remembered an option in vqadmin or qmailadmin where you could 
>> send an email to a domain, but I can't find it now.
>> 
>> You could
>> 
>> 1)
>> 
>> vi passwd (add mysql root password)
>> 
>> echo "select concat(pw_name,'@','mydomain.com') as user from mydomain_com" | 
>> mysql -u root -p`cat passwd` vpopmail &> mydomainlist.txt (Edit file 
>> removing unwanted stuff)
>> 
>> create a mailing list in your email client from the file mydomainlist.txt
>> 
>> OR
>> 
>> 2)
>> 
>> Create a mailing list:
>> 
>> # ezmlm-make -5 postmas...@mydomain.com -Afpqut 
>> /home/vpopmail/domains/mydomain.com/mydomain-list \
>> /home/vpopmail/domains/mydomain.com/.qmail-mydomain-list \
>> mydomain-list mydomain.com
>> 
>> You could get a list of all users in the domain:
>> 
>> vi passwd (add mysql root password)
>> 
>> echo "select concat(pw_name,'@','mydomain.com') as user from mydomain_com" | 
>> mysql -u root -p`cat passwd` vpopmail &> mydomainlist.txt
>> 
>> Subscribe domain users to mailing list:
>> 
>> ezmlm-sub /home/vpopmail/domains/mydomain.com/mydomain-list < 
>> mydomainlist.txt
>> 
>> 
>> Send and email
>> 
>> From postmas...@mydomain.com
>> 
>> To: mydomain-l...@mydomain.com
>> 
>> "Subject"
>> 
>> Body of email
>> 
>> 
>> 
>>> On 4/3/2024 8:35 AM, Giuseppe Perna wrote:
>>> Good morning everyone,
>>> I would like to send an email to all users of an internal qmaIltoaster 
>>> domain, is this POSSIBLE?
>>> If that's not possible, I could also just send an email to all the users on 
>>> my server.
>>> 
>>> Thank you
>>> 
>>> 
>>> #rpm -qa qmail*
>>> qmail-pop3d-toaster-1.03-1.3.22
>>> qmailtoaster-plus.repo-0.2-2
>>> qmailmrtg-toaster-4.2-1.3.7
>>> qmailtoaster-plus-0.3.2-1.4.19
>>> qmail-toaster-1.03-1.3.22
>>> qmailadmin-toaster-1.2.16-1.4.0
>>> 
>>> [root@posta ~]# rpm -qa *toaster*
>>> ucspi-tcp-toaster-0.88-1.3.9
>>> maildrop-toaster-2.0.3-1.3.8
>>> control-panel-toaster-0.5-1.4.0
>>> libdomainkeys-toaster-0.68-1.3.6
>>> qmail-pop3d-toaster-1.03-1.3.22
>>> squirrelmail-toaster-1.4.20-1.3.17
>>> qmailtoaster-plus.repo-0.2-2
>>> vpopmail-toaster-5.4.33-1.4.0
>>> daemontools-toaster-0.76-1.3.6
>>> libsrs2-toaster-1.0.18-1.3.6
>>> courier-authlib-toaster-0.59.2-1.3.10
>>> ripmime-toaster-1.4.0.6-1.3.6
>>> autorespond-toaster-2.0.5-1.4.0
>>> courier-imap-toaster-4.1.2-1.3.10
>>> isoqlog-toaster-2.1-1.3.7
>>> maildrop-toaster-devel-2.0.3-1.3.8
>>> qmailmrtg-toaster-4.2-1.3.7
>>> send-emails-toaster-0.5-1.4.0
>>> spamassassin-toaster-3.3.2-1.4.3
>>> vqadmin-toaster-2.3.7-1.4.1
>>> qmailtoaster-plus-0.3.2-1.4.19
>>> ezmlm-toaster-0.53.324-1.3.6
>>> qmail-toaster-1.03-1.3.22
>>> ezmlm-cgi-toaster-0.53.324-1.3.6
>>> qmailadmin-toaster-1.2.16-1.4.0
>>> simscan-toaster-1.4.0-1.4.0
>>> clamav-toaster-0.97.6-1.4.2
>>> 
>>> Please help me.
>>> 
>>> thanks
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Changed out the servers

[Remo Mattei]

Hi and you do have the Dovecot index in your folder under the maildir?

—
Ciao Remo

> On lunedì, apr 01, 2024 at 00:05, Tony White  (mailto:t...@ycs.com.au)> wrote:
> Hi,
> This is getting beyond a joke.
> I have just rebuilt it all again using RL 9.3. The server runs
> perfectly but when starting my Thunderbird client I get thousands
> of emails again. I made sure the time and date stamps on both sides
> were identical but it only seems to happen with imap.
> I cannot figure out why this is going on and have reverted back
> the the original server.
> Any help is greatly appreciated as I really do need to get up
> and running on RL 9.
>
> TIA :(
>
> regards Anthony White
> On 1/4/24 04:04, Tonix wrote:
> > I remember I had similar problems when, long time ago, I switched servers.
> >
> > It is generally caused by the change in state of the messages. Usually 
> > messages status (unread, read) depends on files timestamps, which must be 
> > carefully preserved when messages are copied to another server.
> >
> > Tonino
> >
> >
> > Il 31/03/2024 12:00, Tony White ha scritto:
> > > Hi Folks,
> > > I have changed out the servers and now
> > > clients are getting all their emails again.
> > > Did I do something wrong or should I have
> > > expected this phenomena?
> > >
> > > TIA ;)
> > >
> > > --
> > > regards
> > > Anthony White
> >
> >
>

Re: [qmailtoaster] web email/roundcube/squirrelamil

[Remo Mattei]



—
Ciao Remo

> On venerdì, mar 29, 2024 at 21:10, Tony White  (mailto:t...@ycs.com.au)> wrote:
> Hi Folks,
> You are correct in both but this is the first time
> I have a working server. I will be moving to ManyDomains next
> after a snapshot. Id=f that works properly then upgrading to
> RL 9 is next. Baby steps for me here. Tried too many times to
> get it all working properly.
>
> regards Anthony White
> On 30/3/24 14:47, Eric Broch wrote:
> >
> > I would reconsider and go with Many Domain option. The domain table option 
> > uses Dovecot binaries that can never be updated since Dovecot has 
> > eliminated the vpopmail driver from the source. I'm not sure why we (qmt 
> > community) ever decided against the Many Domain option. It is so much 
> > easier to interact with.
> >
> >
> > On 3/29/2024 9:32 PM, Tony White wrote:
> > > Hi Eric,
> > > Okay rebuilt using RL 8.9, not a ManyDomain, and all seemed to go well 
> > > until the migration from the old
> > > server to the new. Everything works until dovecot which fails without 
> > > error. There is no process for dovecot
> > > and I cannot see anything in the log file to explain the failure.
> > >
> > > regards Anthony White
> > > On 30/3/24 11:56, Eric Broch wrote:
> > > >
> > > > If you're installing on EL9 you have no choice, all the packages are 
> > > > Many-Domain. You'll have to dump the vpopmail db on the old server, 
> > > > copy it to the new server, import the db into vpopmail mysql db and run 
> > > > the script to convert the db to many domain found here 
> > > > (http://www.qmailtoaster.org/manydom.html). It will leave the old 
> > > > vpopmail domain_tld table entries in place creating a new vpopmail 
> > > > table in its stead.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On 3/29/2024 6:45 PM, Tony White wrote:
> > > > > Hi Eric,
> > > > > In your opinion should I not do a many domain
> > > > > install first then migrate to many domains? I
> > > > > seem to have problems doing many domains then
> > > > > moving my client domains over.
> > > > >
> > > > > TIA :)
> > > > >
> > > > > regards Anthony White
> > > > > On 30/3/24 02:25, Eric Broch wrote:
> > > > > >
> > > > > > It should, although 9 is strictly 'Many-Domain' so vpopmail 
> > > > > > database will need to be converted. Many domain's conversion - QMT 
> > > > > > (qmailtoaster.org) (https://qmailtoaster.org/manydom.html)
> > > > > >
> > > > > >
> > > > > > Rocky 8 & 9 both use PHP8.1
> > > > > >
> > > > > >
> > > > > > Stock Squirrelmail might have issues
> > > > > >
> > > > > >
> > > > > > PHP upgrade 7.x to 8.1 - QmailToaster 
> > > > > > (http://wiki.qmailtoaster.org/index.php?title=PHP_upgrade_7.x_to_8.1)
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 3/29/2024 9:09 AM, Tony White wrote:
> > > > > > > Eric,
> > > > > > > Does the migrate.html direction hold for Rocky 9?
> > > > > > >
> > > > > > > regards Anthony White
> > > > > > > On 30/3/24 02:02, Eric Broch wrote:
> > > > > > > > Yes, email address and password. If both are problematic I 
> > > > > > > > would assume the problem is not specific to either one but 
> > > > > > > > would point to Apache or the server itself. Would you agree?
> > > > > > > >
> > > > > > > > On 3/29/2024 8:54 AM, Tony White wrote:
> > > > > > > > > Hi Eric,
> > > > > > > > > Yes thank you, I have tried that and more.
> > > > > > > > > Roundcube login takes forever to quit with loading then fails.
> > > > > > > > > Squirrelmail just times out. In both cases
> > > > > > > > > I presume the login for both is still email address nnd 
> > > > > > > > > password?
> > > > > > > > >
> > > > > > > > > regards
> > > > > > > > > Anthony White
> > > > > > > > > On 30/3/24 01:26, Eric Broch wrote:
> > > > > > > > > > Perhaps this might help:
> > > > > > > > > >
> > > > > > > > > > php - apache proxy_fcgi - The timeout specified has expired 
> > > > > > > > > > - Error dispatching request - Stack Overflow 
> > > > > > > > > > 
> > > > > > > > > >  
> > > > > > > > > > (https://stackoverflow.com/questions/46594731/apache-proxy-fcgi-the-timeout-specified-has-expired-error-dispatching-reques)
> > > > > > > > > >
> > > > > > > > > > On 3/29/2024 8:06 AM, Tony White wrote:
> > > > > > > > > > > The timeout specified has expired: [client 
> > > > > > > > > > > 10.2.1.5:53966] AH01075: Error dispatching request to
> > > > > > > > >
> > > > > > >
> > > > >
> > >
>

Re: [qmailtoaster] web email/roundcube/squirrelamil

[Remo Mattei]

Hi all
RL 8.9 do I read that right? Maybe if I were you I would reconsider to RL 9.x

Just my 2 cents

—
Ciao Remo

> On venerdì, mar 29, 2024 at 20:32, Tony White  (mailto:t...@ycs.com.au)> wrote:
> Hi Eric,
> Okay rebuilt using RL 8.9, not a ManyDomain, and all seemed to go well until 
> the migration from the old
> server to the new. Everything works until dovecot which fails without error. 
> There is no process for dovecot
> and I cannot see anything in the log file to explain the failure.
>
> regards Anthony White
> On 30/3/24 11:56, Eric Broch wrote:
> >
> > If you're installing on EL9 you have no choice, all the packages are 
> > Many-Domain. You'll have to dump the vpopmail db on the old server, copy it 
> > to the new server, import the db into vpopmail mysql db and run the script 
> > to convert the db to many domain found here 
> > (http://www.qmailtoaster.org/manydom.html). It will leave the old vpopmail 
> > domain_tld table entries in place creating a new vpopmail table in its 
> > stead.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On 3/29/2024 6:45 PM, Tony White wrote:
> > > Hi Eric,
> > > In your opinion should I not do a many domain
> > > install first then migrate to many domains? I
> > > seem to have problems doing many domains then
> > > moving my client domains over.
> > >
> > > TIA :)
> > >
> > > regards Anthony White
> > > On 30/3/24 02:25, Eric Broch wrote:
> > > >
> > > > It should, although 9 is strictly 'Many-Domain' so vpopmail database 
> > > > will need to be converted. Many domain's conversion - QMT 
> > > > (qmailtoaster.org) (https://qmailtoaster.org/manydom.html)
> > > >
> > > >
> > > > Rocky 8 & 9 both use PHP8.1
> > > >
> > > >
> > > > Stock Squirrelmail might have issues
> > > >
> > > >
> > > > PHP upgrade 7.x to 8.1 - QmailToaster 
> > > > (http://wiki.qmailtoaster.org/index.php?title=PHP_upgrade_7.x_to_8.1)
> > > >
> > > >
> > > >
> > > > On 3/29/2024 9:09 AM, Tony White wrote:
> > > > > Eric,
> > > > > Does the migrate.html direction hold for Rocky 9?
> > > > >
> > > > > regards Anthony White
> > > > > On 30/3/24 02:02, Eric Broch wrote:
> > > > > > Yes, email address and password. If both are problematic I would 
> > > > > > assume the problem is not specific to either one but would point to 
> > > > > > Apache or the server itself. Would you agree?
> > > > > >
> > > > > > On 3/29/2024 8:54 AM, Tony White wrote:
> > > > > > > Hi Eric,
> > > > > > > Yes thank you, I have tried that and more.
> > > > > > > Roundcube login takes forever to quit with loading then fails.
> > > > > > > Squirrelmail just times out. In both cases
> > > > > > > I presume the login for both is still email address nnd password?
> > > > > > >
> > > > > > > regards
> > > > > > > Anthony White
> > > > > > > On 30/3/24 01:26, Eric Broch wrote:
> > > > > > > > Perhaps this might help:
> > > > > > > >
> > > > > > > > php - apache proxy_fcgi - The timeout specified has expired - 
> > > > > > > > Error dispatching request - Stack Overflow 
> > > > > > > > 
> > > > > > > >  
> > > > > > > > (https://stackoverflow.com/questions/46594731/apache-proxy-fcgi-the-timeout-specified-has-expired-error-dispatching-reques)
> > > > > > > >
> > > > > > > > On 3/29/2024 8:06 AM, Tony White wrote:
> > > > > > > > > The timeout specified has expired: [client 10.2.1.5:53966] 
> > > > > > > > > AH01075: Error dispatching request to
> > > > > > >
> > > > >
> > >
>

Re: [qmailtoaster] Certificate Error

[Remo Mattei]

This value was set long ago I would suggest to leave ! And change encrypted to 
password it should all work fine. 
Inviato da iPhone

> Il giorno 22 mar 2024, alle ore 16:35, g...@gbco.us ha scritto:
> 
> Ok, in my old server's /var/qmail/supervise/submission/run file, I had the 
> following line.
> 
> export REQUIRE_AUTH=1
> 
> 
> In the new server, it had the following line.
> 
> export SMTPAUTH="!"
> 
> 
> I'm not sure what the syntax on the new server line means. I changed the line 
> to be like my old server and now sending mail through port 587, with starttls 
> for local domains.
> 
> However, when I try to send to external domains, I get the error that CHKUSER 
> rejected relaying, saying "client not allowed to relay"
> 
> Maybe I'm making progress, but don't know.
> 
> Gary
> 
> 
>> On 2024-03-22 19:30, g...@gbco.us wrote:
>> Well, this is the way many of my clients are already configured... So
>> I have to figure out a way to make it work, or go back to my old
>> server. Not really an option to reconfigure all my clients.
>> Thanks, Gary
>>> On 2024-03-22 19:26, Remo Mattei wrote:
>>> You need to use password not encrypted.
>>> Inviato da iPhone
>>>> Il giorno 22 mar 2024, alle ore 15:30, g...@gbco.us ha scritto:
>>>> 
>>>> I can send mail via the roundcube web mail. That's where this message is 
>>>> coming from.
>>>> When sending mail from thunderbird, I have my smtp server set up in my 
>>>> client as
>>>> Port 587
>>>> startTLS
>>>> Encrypted Password
>>>> This is the same as I had with a number of clients on my old server.
>>>> When I try to send email, I get this error.
>>>> Sending of the message failed.
>>>> An error occurred while sending mail: Outgoing server (SMTP) error. The 
>>>> server responded:  TLS no valid RSA private key: 
>>>> error:8002:system library::No such file or directory (#4.3.0).
>>>> To create certificates on my new server. I retrieved certs from letencrypt 
>>>> and then did this.
>>>> cp -p /var/qmail/control/servercert.pem 
>>>> /var/qmail/control/servercert.pem.lastmonth
>>>> cat /etc/letsencrypt/live/mail.gbco.us/{cert,chain,fullchain,privkey}.pem 
>>>> > /var/qmail/control/servercert.pem
>>>> chown vpopmail:qmail /var/qmail/control/servercert.pem
>>>> chmod 640 /var/qmail/control/servercert.pem
>>>> Any idea what's going on with this error?
>>>> thanks, Gary
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Certificate Error

[Remo Mattei]

I have the private first is I recall it right then cert then bundle 
I see you have an extra there. Not sure that could cause the issue 


Inviato da iPhone

> Il giorno 22 mar 2024, alle ore 15:30, g...@gbco.us ha scritto:
> 
> 
> I can send mail via the roundcube web mail. That's where this message is 
> coming from.
> 
> When sending mail from thunderbird, I have my smtp server set up in my client 
> as
> 
> Port 587
> startTLS
> Encrypted Password
> 
> This is the same as I had with a number of clients on my old server.
> 
> When I try to send email, I get this error.
> 
> Sending of the message failed.
> An error occurred while sending mail: Outgoing server (SMTP) error. The 
> server responded:  TLS no valid RSA private key: 
> error:8002:system library::No such file or directory (#4.3.0).
> 
> 
> To create certificates on my new server. I retrieved certs from letencrypt 
> and then did this.
> 
> cp -p /var/qmail/control/servercert.pem 
> /var/qmail/control/servercert.pem.lastmonth
> cat /etc/letsencrypt/live/mail.gbco.us/{cert,chain,fullchain,privkey}.pem > 
> /var/qmail/control/servercert.pem
> 
> chown vpopmail:qmail /var/qmail/control/servercert.pem
> chmod 640 /var/qmail/control/servercert.pem
> 
> 
> 
> Any idea what's going on with this error?
> 
> thanks, Gary
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Certificate Error

[Remo Mattei]

You need to use password not encrypted. 


Inviato da iPhone

> Il giorno 22 mar 2024, alle ore 15:30, g...@gbco.us ha scritto:
> 
> 
> I can send mail via the roundcube web mail. That's where this message is 
> coming from.
> 
> When sending mail from thunderbird, I have my smtp server set up in my client 
> as
> 
> Port 587
> startTLS
> Encrypted Password
> 
> This is the same as I had with a number of clients on my old server.
> 
> When I try to send email, I get this error.
> 
> Sending of the message failed.
> An error occurred while sending mail: Outgoing server (SMTP) error. The 
> server responded:  TLS no valid RSA private key: 
> error:8002:system library::No such file or directory (#4.3.0).
> 
> 
> To create certificates on my new server. I retrieved certs from letencrypt 
> and then did this.
> 
> cp -p /var/qmail/control/servercert.pem 
> /var/qmail/control/servercert.pem.lastmonth
> cat /etc/letsencrypt/live/mail.gbco.us/{cert,chain,fullchain,privkey}.pem > 
> /var/qmail/control/servercert.pem
> 
> chown vpopmail:qmail /var/qmail/control/servercert.pem
> chmod 640 /var/qmail/control/servercert.pem
> 
> 
> 
> Any idea what's going on with this error?
> 
> thanks, Gary
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] CNAME failure temporarily

[Remo Mattei]

Try a diff name server after you changed your records. 
Inviato da iPhone

> Il giorno 18 mar 2024, alle ore 17:14, Tony White  ha 
> scritto:
> 
>  Hi Folks,
>   I have a single client getting this error on
> a single domain. Checking the domain there are
> no CNAME records for it at all. How do I get
> QMT to try A records? Or is there another thing
> I should try?
> 
> TIA :)
>  -- 
> regards
> Anthony White

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Why don’t you use Aliases? 

Remo 

> On Feb 23, 2024, at 15:20, Gary Bowling  wrote:
> 
> 
> 
> Yea, it was really an accident. Your migration plans don't migrate web 
> configs. But on my server I have many virtualhosts for different clients. 
> Many of my clients originally wanted their web mail on their own domain, not 
> on a single shared domain.
> 
> To handle this I have a bunch of virtualhosts with configurations that 
> accomplish that. For my specific migration I needed to move those configs, so 
> an rsync of the /etc/httpd/conf.d/ directory was done.
> 
> After I did that, I moved all those into a different directory to concentrate 
> on just making the server work with only the one domain, but that also copied 
> the php.conf.
> 
> This is I like about the new apache php-fpm implementation. In the past the 
> only files in conf.d were essentially user files and these types of files 
> were in conf.modules.d. I guess once php wasn't a module, they felt it should 
> go in the conf.d dir.
> 
> 
> 
> gb
> 
> 
> 
> On 2/23/2024 4:44 PM, Eric Broch wrote:
>> I'm not sure why you would migrate php.conf?
>> 
>> This is not a part of the qmt migration.
>> 
>> On 2/23/2024 2:39 PM, Gary Bowling wrote:
>>> 
>>> Yes, and very importantly for apache, you to have to match the "php files" 
>>> and send them to a handler in a conf file with the FilesMatch and 
>>> SetHandler directives. That's actually the piece that got overwritten when 
>>> I sync'd over my configs from my old Centos 7 box and caused things not to 
>>> work.
>>> 
>>> Since I was unaware of the new way that was done in the Apache config 
>>> files, it took me a while to track it down. Since my php.conf file was from 
>>> an old box, it had the php5_module listed in it. Not knowing that was no 
>>> longer used, I had to go down the rabbit hole to figure it out.
>>> 
>>> Now that I beat my head against the wall for a couple of days, it seems 
>>> everyone knows all this :)  Everyone but me, haha. I think everyone was 
>>> just enjoying the show and laughing at me, but that's ok I was laughing at 
>>> myself as well.
>>> 
>>> gb
>>> 
>>> 
>>> 
>>> On 2/23/2024 2:51 PM, Quinn Comendant wrote:
 On 23 Feb 2024, at 9:10, Gary Bowling wrote:
 
  LoadModule php5_module modules/libphp5.so 
 
 On my Rocky 9 box, this file does not exist and I cannot find that it is 
 even suppose to exist. But I'm not sure how php is suppose to work on 
 Apache without it.
 
 Hi Gary,
 
 Glad you worked it out, but just in case you're curious, the reason you 
 can't find a libphp5.so or libphp8.so file is because with PHP 7 and 8 the 
 preferred way to execute php scripts is via PHP-FPM, and most distros will 
 install PHP this way by default. PHP-FPM has much better performance and 
 security, and most PHP apps will run fine without modification. The apache 
 configuration to use PHP-FPM is somewhat different, as you discovered.
 
 Quinn
 
>>> - To 
>>> unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>>>  For additional 
>>> commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>>> -
>>>  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For 
>>> additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

ter v. 1.3 Admin"
> > > AuthUserFile /usr/share/toaster/include/admin.htpasswd
> > > Require valid-user
> > > Require ip ${aclnet}
> > > 
> > > 
> > > 
> > > AllowOverride All
> > > Options ExecCGI
> > > 
> > > AuthType Basic
> > > AuthName "Qmail Toaster v. 1.3 Admin"
> > > AuthUserFile /usr/share/toaster/include/admin.htpasswd
> > > require valid-user
> > > Require ip ${aclnet}
> > > 
> > > 
> > > 
> > > AllowOverride All
> > > Options ExecCGI
> > > 
> > > Require ip ${aclnet}
> > > 
> > > 
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > On 2/23/2024 11:43 AM, Eric Broch wrote:
> > > >
> > > > Gary,
> > > >
> > > >
> > > > can you dump /etc/httpd/conf/toaster.conf and post the output to the 
> > > > list?
> > > >
> > > >
> > > > I'm particularly interested in the following line
> > > >
> > > >
> > > > 'Define aclnet "192.168.2.0/24 192.168.9.0/24 127.0.0.1"'
> > > >
> > > >
> > > > Eric
> > > >
> > > >
> > > > On 2/23/2024 9:39 AM, Gary Bowling wrote:
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks Eric
> > > > >
> > > > >
> > > > > gb
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 2/23/2024 11:08 AM, Eric Broch wrote:
> > > > > >
> > > > > > My Box:
> > > > > >
> > > > > >
> > > > > > # find / -name "*libphp*"
> > > > > >
> > > > > >
> > > > > > #
> > > > > >
> > > > > >
> > > > > >
> > > > > > Nothing. And yet, my toaster-admin works.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On 2/23/2024 8:33 AM, Gary Bowling wrote:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Yes I know that. But in past version, it was required to properly 
> > > > > > > serve out a php file. Without it the php file just gets served as 
> > > > > > > a text file and not executed as php code.
> > > > > > >
> > > > > > >
> > > > > > > I discovered my server was not executing index.php. After adding 
> > > > > > > a DirectoryIndex index.php statement in my server, it now just 
> > > > > > > serves out the index.php from the roundcube directory as a text 
> > > > > > > file.
> > > > > > >
> > > > > > >
> > > > > > > In troubleshooting why it was not being executed and was instead 
> > > > > > > being served out as a text file, I found there was not libphp 
> > > > > > > file.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Which, in past versions was provided by the php rpm package. If I 
> > > > > > > go to my old Centos 7 box and list files in the php rpm, it 
> > > > > > > provides the file /etc/httpd/modules/libphp5.so and that gets 
> > > > > > > loaded in apache to execute php code.
> > > > > > >
> > > > > > >
> > > > > > > But in Rocky 9, there is no libphp module in the php rpm, and 
> > > > > > > there is not a libphp file in my modules directory and I cannot 
> > > > > > > find that Rocky 9 even contains a libphp file.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > So I'm trying to find out how Rocky 9 executes php code instead 
> > > > > > > of serving it up as a text file. Since roundcube is working for 
> > > > > > > you guys, you either have a 

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

The Apache statement is if available load it. I will check not sure I do.

--
Sent from iPhone

> On venerdì, feb 23, 2024 at 07:11, Gary Bowling  (mailto:g...@gbco.us)> wrote:
>
>
>
>
>
> Question. On your Rocky 9 boxes, do you have a libphp5.so module? Listed in 
> the /etc/httpd/conf.d/php.conf file as.
>
>
>
> 
> LoadModule php5_module modules/libphp5.so
> 
>
>
>
>
>
>
>
> On my Rocky 9 box, this file does not exist and I cannot find that it is even 
> suppose to exist. But I'm not sure how php is suppose to work on Apache 
> without it. Maybe they have changed the way that works.
>
>
>
> In previous versions, like Centos 7, it was included in the php rpm that was 
> installed.
>
>
> Thanks, gb
>
>
>
>
>
>
> On 2/22/2024 11:17 PM, Remo Mattei wrote:
> > Here is my list of php
> > php-common-8.0.30-1.el9_2.x86_64
> > php-pdo-8.0.30-1.el9_2.x86_64
> > php-fpm-8.0.30-1.el9_2.x86_64
> > php-process-8.0.30-1.el9_2.x86_64
> > php-ldap-8.0.30-1.el9_2.x86_64
> > php-mbstring-8.0.30-1.el9_2.x86_64
> > php-xml-8.0.30-1.el9_2.x86_64
> > php-pecl-zip-1.19.2-6.el9.x86_64
> > php-enchant-8.0.30-1.el9_2.x86_64
> > php-intl-8.0.30-1.el9_2.x86_64
> > php-gd-8.0.30-1.el9_2.x86_64
> > php-mysqlnd-8.0.30-1.el9_2.x86_64
> > php-cli-8.0.30-1.el9_2.x86_64
> > php-opcache-8.0.30-1.el9_2.x86_64
> > php-8.0.30-1.el9_2.x86_64
> >
> >
> >
> > > On Feb 22, 2024, at 19:58, Gary Bowling  
> > > (mailto:g...@gbco.us) wrote:
> > >
> > >
> > >
> > >
> > >
> > > So in doing some more troubleshooting, it didn't seem like php was 
> > > working correctly. In poking around I do not find a libphp.so file. I 
> > > assume since it's php 8.0.3 it would be libphp8.so module?
> > >
> > >
> > > That should come from the php install, so I did this to see all the files 
> > > installed by php.
> > >
> > >
> > >
> > > # rpm -ql php
> > > (contains no files)
> > >
> > >
> > >
> > > And it says it contains NO FILES! What's up with that?? So I did this.
> > >
> > >
> > > dnf reinstall php
> > > Last metadata expiration check: 0:46:39 ago on Fri 23 Feb 2024 03:03:37 
> > > AM UTC.
> > > Dependencies resolved.
> > > ==
> > > Package Architecture Version Repository Size
> > > ==
> > > Reinstalling:
> > > php x86_64 8.0.30-1.el9_2 appstream 7.7 k
> > >
> > > Transaction Summary
> > > ==
> > >
> > > Total download size: 7.7 k
> > > Installed size: 0
> > > Is this ok [y/N]: y
> > > Downloading Packages:
> > > php-8.0.30-1.el9_2.x86_64.rpm 56 kB/s | 7.7 kB 00:00
> > > --
> > > Total 26 kB/s | 7.7 kB 00:00
> > > Running transaction check
> > > Transaction check succeeded.
> > > Running transaction test
> > > Transaction test succeeded.
> > > Running transaction
> > > Preparing : 1/1
> > > Reinstalling : php-8.0.30-1.el9_2.x86_64 1/2
> > > Cleanup : php-8.0.30-1.el9_2.x86_64 2/2
> > > Verifying : php-8.0.30-1.el9_2.x86_64 1/2
> > > Verifying : php-8.0.30-1.el9_2.x86_64 2/2
> > >
> > > Reinstalled:
> > > php-8.0.30-1.el9_2.x86_64
> > >
> > > Complete!
> > >
> > >
> > >
> > >
> > > 
> > >
> > >
> > >
> > > To get a new clean install of php.. But even after doing this, I still 
> > > get this.
> > >
> > >
> > > rpm -ql php
> > > (contains no files)
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > So it appears that my php install is broken and even a reinstall doesn't 
> > > fix it. I'm not sure what's up with that. Maybe the repository that my 
> > > b

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Here is my list of php
php-common-8.0.30-1.el9_2.x86_64
php-pdo-8.0.30-1.el9_2.x86_64
php-fpm-8.0.30-1.el9_2.x86_64
php-process-8.0.30-1.el9_2.x86_64
php-ldap-8.0.30-1.el9_2.x86_64
php-mbstring-8.0.30-1.el9_2.x86_64
php-xml-8.0.30-1.el9_2.x86_64
php-pecl-zip-1.19.2-6.el9.x86_64
php-enchant-8.0.30-1.el9_2.x86_64
php-intl-8.0.30-1.el9_2.x86_64
php-gd-8.0.30-1.el9_2.x86_64
php-mysqlnd-8.0.30-1.el9_2.x86_64
php-cli-8.0.30-1.el9_2.x86_64
php-opcache-8.0.30-1.el9_2.x86_64
php-8.0.30-1.el9_2.x86_64



> On Feb 22, 2024, at 19:58, Gary Bowling  wrote:
> 
> 
> 
> So in doing some more troubleshooting, it didn't seem like php was working 
> correctly. In poking around I do not find a libphp.so file. I assume since 
> it's php 8.0.3 it would be libphp8.so module?
> 
> That should come from the php install, so I did this to see all the files 
> installed by php.
> 
> # rpm -ql php
> (contains no files)
> 
> And it says it contains NO FILES! What's up with that?? So I did this.
> 
> dnf reinstall php
> Last metadata expiration check: 0:46:39 ago on Fri 23 Feb 2024 03:03:37 AM 
> UTC.
> Dependencies resolved.
> ==
>  PackageArchitecture  Version 
>  RepositorySize
> ==
> Reinstalling:
>  phpx86_64
> 8.0.30-1.el9_2   appstream
> 7.7 k
> 
> Transaction Summary
> ==
> 
> Total download size: 7.7 k
> Installed size: 0
> Is this ok [y/N]: y
> Downloading Packages:
> php-8.0.30-1.el9_2.x86_64.rpm 
>  56 kB/s | 7.7 kB 00:00
> --
> Total 
>  26 kB/s | 7.7 kB 00:00
> Running transaction check
> Transaction check succeeded.
> Running transaction test
> Transaction test succeeded.
> Running transaction
>   Preparing:  
> 1/1
>   Reinstalling : php-8.0.30-1.el9_2.x86_64
> 1/2
>   Cleanup  : php-8.0.30-1.el9_2.x86_64
> 2/2
>   Verifying: php-8.0.30-1.el9_2.x86_64
> 1/2
>   Verifying: php-8.0.30-1.el9_2.x86_64
> 2/2
> 
> Reinstalled:
>   php-8.0.30-1.el9_2.x86_64
> 
> Complete!
> 
> 
> 
> 
> To get a new clean install of php.. But even after doing this, I still get 
> this.
> 
>  rpm -ql php
> (contains no files)
> 
> 
> 
> So it appears that my php install is broken and even a reinstall doesn't fix 
> it. I'm not sure what's up with that. Maybe the repository that my box is 
> using has problems?
> 
> 
> 
> Have you ever seen that problem?
> 
> 
> 
> gb
> 
> 
> 
> 
> 
> 
> 
> 
> 
> On 2/22/2024 10:45 PM, Remo Mattei wrote:
>> Hi Gary, 
>> I have the default di don’t change anything on that file
>> 
>>> On Feb 22, 2024, at 18:59, Gary Bowling  
>>> <mailto:g...@gbco.us> wrote:
>>> 
>>> 
>>> 
>>> Thanks. I suspect some of my issues might be from migrating everything over 
>>> from my old server which is clearly a lot different.
>>> 
>>> What do your virtualhost configs for your domain look like in 
>>> /etc/httpd/conf.d/
>>> 
>>> It seems my only problems are with web things. So it has to be either a php 
>>> issue or an httpd config issue. There is very little done with php, jus

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Hi Gary, 
I have the default di don’t change anything on that file

> On Feb 22, 2024, at 18:59, Gary Bowling  wrote:
> 
> 
> 
> Thanks. I suspect some of my issues might be from migrating everything over 
> from my old server which is clearly a lot different.
> 
> What do your virtualhost configs for your domain look like in 
> /etc/httpd/conf.d/
> 
> It seems my only problems are with web things. So it has to be either a php 
> issue or an httpd config issue. There is very little done with php, just a 
> few things in php.ini.
> 
> There is a lot more done in httpd conf files, with various directives and 
> virtualhosts. Although not really much for qmailadmin
> 
> 
> 
> Thanks, gb
> 
> 
> 
> On 2/22/2024 8:43 PM, Eric Broch wrote:
>> I did another fresh install of Rocky9/QMT and I can't seem to duplicate the 
>> problem you're having.
>> 
>> 
>> 
>> On 2/22/2024 12:48 PM, Eric Broch wrote:
>>> Mine as well. It'd be nice to see some errors in the httpd log.
>>> 
>>> 
>>> 
>>> On 2/22/2024 11:15 AM, Gary Bowling wrote:
>>>> 
>>>> Thanks. So Eric, my version is 8.0.3 as I stated previously.
>>>> 
>>>> 
>>>> 
>>>> php -v
>>>> PHP 8.0.30 (cli) (built: Aug  3 2023 17:13:08) ( NTS gcc x86_64 )
>>>> Copyright (c) The PHP Group
>>>> Zend Engine v4.0.30, Copyright (c) Zend Technologies
>>>> with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies
>>>> 
>>>> 
>>>> 
>>>> Thanks, gb
>>>> 
>>>> 
>>>> 
>>>> On 2/22/2024 1:11 PM, Remo Mattei wrote:
>>>>> Gary, 
>>>>> Yes default is php 8.0.3 I just upgraded afterwards to 8.3 you are fine 
>>>>> on the default installation php. Sorry for the confusion.
>>>>> 
>>>>> Remo 
>>>>> 
>>>>>> On Feb 22, 2024, at 10:05, Gary Bowling  
>>>>>> <mailto:g...@gbco.us> wrote:
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Not sure what you're saying Remo. My version is 8.0.3, and from your 
>>>>>> command it looks like yours is as well. I didn't upgrade to anything, 
>>>>>> just installed Rocky 9. Maybe you meant 8.0.3 instead of 8.3.
>>>>>> 
>>>>>> gb
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> On 2/22/2024 12:52 PM, Remo Mattei wrote:
>>>>>>> I just upgraded to 8.3 myself seems you can do that no problem but keep 
>>>>>>> 8 there Gary. 
>>>>>>> 
>>>>>>> Remo 
>>>>>>> 
>>>>>>>> On Feb 22, 2024, at 09:50, Gary Bowling  
>>>>>>>> <mailto:g...@gbco.us> wrote:
>>>>>>>> 
>>>>>>>> 
>>>>>>>> 
>>>>>>>>  php -v
>>>>>>>> PHP 8.0.30 (cli) (built: Aug  3 2023 17:13:08) ( NTS gcc x86_64 )
>>>>>>>> Copyright (c) The PHP Group
>>>>>>>> Zend Engine v4.0.30, Copyright (c) Zend Technologies
>>>>>>>> with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies
>>>>>>>> 
>>>>>>>> 
>>>>>>>> 
>>>>>>>> 
>>>>>>>> On 2/22/2024 12:31 PM, Eric Broch wrote:
>>>>>>>>> Odd! Everything works fine on my Rocky9/qmt host.
>>>>>>>>> 
>>>>>>>>> What version of php are you running?
>>>>>>>>> 
>>>>>>>>> # php -v
>>>>>>>>> 
>>>>>>>>> On 2/22/2024 10:21 AM, Gary Bowling wrote:
>>>>>>>>>> Thanks Eric.
>>>>>>>>>> 
>>>>>>>>>> Yep, just to not send a huge logfile. After having everything 
>>>>>>>>>> stopped for two hrs, I started everything and went to the 
>>>>>>>>>> server/admin-toaster and got the screen from below. It looks like a 
>>>>>>>>>> 401 response, which indicates a lack of authentication credentials. 
>>>>>>>>>> And I'm not sure why. Probably something to do with me copying over 
>>>>>>>>>> the admin.pass or admin.htpasswd from my old ser

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Hi
The last month I rebuilt 3 qmail servers and all working I shut one down as I 
only need two of them and do not recall all the issues Gary is having.
Gary I did offer my help I was not going to ask for any compensation btw as I 
had some time. Going out of town now so it will be hard at this time email 
only. But not sure why all this issues.

Remo

--
Sent from iPhone

> On giovedì, feb 22, 2024 at 17:43, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
>
> I did another fresh install of Rocky9/QMT and I can't seem to duplicate the 
> problem you're having.
>
>
>
>
>
> On 2/22/2024 12:48 PM, Eric Broch wrote:
> >
> > Mine as well. It'd be nice to see some errors in the httpd log.
> >
> >
> >
> >
> >
> > On 2/22/2024 11:15 AM, Gary Bowling wrote:
> > >
> > >
> > >
> > >
> > >
> > > Thanks. So Eric, my version is 8.0.3 as I stated previously.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > php -v
> > > PHP 8.0.30 (cli) (built: Aug 3 2023 17:13:08) ( NTS gcc x86_64 )
> > > Copyright (c) The PHP Group
> > > Zend Engine v4.0.30, Copyright (c) Zend Technologies
> > > with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies
> > >
> > >
> > >
> > >
> > >
> > >
> > > Thanks, gb
> > >
> > >
> > >
> > >
> > >
> > >
> > > On 2/22/2024 1:11 PM, Remo Mattei wrote:
> > > > Gary,
> > > > Yes default is php 8.0.3 I just upgraded afterwards to 8.3 you are fine 
> > > > on the default installation php. Sorry for the confusion.
> > > >
> > > > Remo
> > > >
> > > > > On Feb 22, 2024, at 10:05, Gary Bowling  
> > > > > (mailto:g...@gbco.us) wrote:
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Not sure what you're saying Remo. My version is 8.0.3, and from your 
> > > > > command it looks like yours is as well. I didn't upgrade to anything, 
> > > > > just installed Rocky 9. Maybe you meant 8.0.3 instead of 8.3.
> > > > >
> > > > >
> > > > >
> > > > > gb
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 2/22/2024 12:52 PM, Remo Mattei wrote:
> > > > > > I just upgraded to 8.3 myself seems you can do that no problem but 
> > > > > > keep 8 there Gary.
> > > > > >
> > > > > > Remo
> > > > > >
> > > > > > > On Feb 22, 2024, at 09:50, Gary Bowling  
> > > > > > > (mailto:g...@gbco.us) wrote:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > php -v
> > > > > > > PHP 8.0.30 (cli) (built: Aug 3 2023 17:13:08) ( NTS gcc x86_64 )
> > > > > > > Copyright (c) The PHP Group
> > > > > > > Zend Engine v4.0.30, Copyright (c) Zend Technologies
> > > > > > > with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 2/22/2024 12:31 PM, Eric Broch wrote:
> > > > > > > >
> > > > > > > > Odd! Everything works fine on my Rocky9/qmt host.
> > > > > > > >
> > > > > > > >
> > > > > > > > What version of php are you running?
> > > > > > > >
> > > > > > > >
> > > > > > > > # php -v
> > > > > > > >
> > > > > > > > On 2/22/2024 10:21 AM, Gary Bowling wrote:
> > > > > > > > >
> > > > > > > > > Thanks Eric.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > >

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Gary, 
Yes default is php 8.0.3 I just upgraded afterwards to 8.3 you are fine on the 
default installation php. Sorry for the confusion.

Remo 

> On Feb 22, 2024, at 10:05, Gary Bowling  wrote:
> 
> 
> 
> Not sure what you're saying Remo. My version is 8.0.3, and from your command 
> it looks like yours is as well. I didn't upgrade to anything, just installed 
> Rocky 9. Maybe you meant 8.0.3 instead of 8.3.
> 
> gb
> 
> 
> 
> On 2/22/2024 12:52 PM, Remo Mattei wrote:
>> I just upgraded to 8.3 myself seems you can do that no problem but keep 8 
>> there Gary. 
>> 
>> Remo 
>> 
>>> On Feb 22, 2024, at 09:50, Gary Bowling  
>>> <mailto:g...@gbco.us> wrote:
>>> 
>>> 
>>> 
>>>  php -v
>>> PHP 8.0.30 (cli) (built: Aug  3 2023 17:13:08) ( NTS gcc x86_64 )
>>> Copyright (c) The PHP Group
>>> Zend Engine v4.0.30, Copyright (c) Zend Technologies
>>> with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies
>>> 
>>> 
>>> 
>>> 
>>> On 2/22/2024 12:31 PM, Eric Broch wrote:
>>>> Odd! Everything works fine on my Rocky9/qmt host.
>>>> 
>>>> What version of php are you running?
>>>> 
>>>> # php -v
>>>> 
>>>> On 2/22/2024 10:21 AM, Gary Bowling wrote:
>>>>> Thanks Eric.
>>>>> 
>>>>> Yep, just to not send a huge logfile. After having everything stopped for 
>>>>> two hrs, I started everything and went to the server/admin-toaster and 
>>>>> got the screen from below. It looks like a 401 response, which indicates 
>>>>> a lack of authentication credentials. And I'm not sure why. Probably 
>>>>> something to do with me copying over the admin.pass or admin.htpasswd 
>>>>> from my old server. That was part of the migration page.
>>>>> 
>>>>> Here's the httpd/error.log from that.
>>>>> 
>>>>> [Thu Feb 22 17:12:23.702465 2024] [suexec:notice] [pid 121153:tid 121153] 
>>>>> AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
>>>>> [Thu Feb 22 17:12:23.714703 2024] [so:warn] [pid 121153:tid 121153] 
>>>>> AH01574: module proxy_ajp_module is already loaded, skipping
>>>>> [Thu Feb 22 17:12:23.719266 2024] [lbmethod_heartbeat:notice] [pid 
>>>>> 121153:tid 121153] AH02282: No slotmem from mod_heartmonitor
>>>>> [Thu Feb 22 17:12:23.722704 2024] [mpm_event:notice] [pid 121153:tid 
>>>>> 121153] AH00489: Apache/2.4.57 (Rocky Linux) OpenSSL/3.0.7 configured -- 
>>>>> resuming normal operations
>>>>> [Thu Feb 22 17:12:23.722720 2024] [core:notice] [pid 121153:tid 121153] 
>>>>> AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> And here's the httpd/access.log
>>>>> 
>>>>> 96.46.15.70 - - [22/Feb/2024:17:12:41 +] "GET /admin-toaster 
>>>>> HTTP/1.1" 401 381 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) 
>>>>> AppleWebKit/537.36 (KHTML, like Gecko) Chrome/122.
>>>>> 0.0.0 Safari/537.36"
>>>>> 96.46.15.70 - admin [22/Feb/2024:17:12:41 +] "GET /admin-toaster 
>>>>> HTTP/1.1" 301 244 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) 
>>>>> AppleWebKit/537.36 (KHTML, like Gecko) Chrome/
>>>>> 122.0.0.0 Safari/537.36"
>>>>> 
>>>>> 
>>>>> 
>>>>> On 2/22/2024 10:45 AM, Eric Broch wrote:
>>>>>> Can you check the httpd logs?
>>>>>> 
>>>>>> On 2/22/2024 8:12 AM, Gary Bowling wrote:
>>>>>>> 
>>>>>>> Another issue. When I log in to admin-toaster, it properly asks for my 
>>>>>>> password and accepts it, but then all I get is this screen.
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> Between the problems I'm having with roundcube and with qmailadmin, 
>>>>>>> something is very wrong with my install. I don't get any errors in the 
>>>>>>> logs, either in messages or httpd logs.
>>>>>>> 
>>>>&g

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

I just upgraded to 8.3 myself seems you can do that no problem but keep 8 there 
Gary. 

Remo 

> On Feb 22, 2024, at 09:50, Gary Bowling  wrote:
> 
> 
> 
>  php -v
> PHP 8.0.30 (cli) (built: Aug  3 2023 17:13:08) ( NTS gcc x86_64 )
> Copyright (c) The PHP Group
> Zend Engine v4.0.30, Copyright (c) Zend Technologies
> with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies
> 
> 
> 
> 
> On 2/22/2024 12:31 PM, Eric Broch wrote:
>> Odd! Everything works fine on my Rocky9/qmt host.
>> 
>> What version of php are you running?
>> 
>> # php -v
>> 
>> On 2/22/2024 10:21 AM, Gary Bowling wrote:
>>> Thanks Eric.
>>> 
>>> Yep, just to not send a huge logfile. After having everything stopped for 
>>> two hrs, I started everything and went to the server/admin-toaster and got 
>>> the screen from below. It looks like a 401 response, which indicates a lack 
>>> of authentication credentials. And I'm not sure why. Probably something to 
>>> do with me copying over the admin.pass or admin.htpasswd from my old 
>>> server. That was part of the migration page.
>>> 
>>> Here's the httpd/error.log from that.
>>> 
>>> [Thu Feb 22 17:12:23.702465 2024] [suexec:notice] [pid 121153:tid 121153] 
>>> AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
>>> [Thu Feb 22 17:12:23.714703 2024] [so:warn] [pid 121153:tid 121153] 
>>> AH01574: module proxy_ajp_module is already loaded, skipping
>>> [Thu Feb 22 17:12:23.719266 2024] [lbmethod_heartbeat:notice] [pid 
>>> 121153:tid 121153] AH02282: No slotmem from mod_heartmonitor
>>> [Thu Feb 22 17:12:23.722704 2024] [mpm_event:notice] [pid 121153:tid 
>>> 121153] AH00489: Apache/2.4.57 (Rocky Linux) OpenSSL/3.0.7 configured -- 
>>> resuming normal operations
>>> [Thu Feb 22 17:12:23.722720 2024] [core:notice] [pid 121153:tid 121153] 
>>> AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'
>>> 
>>> 
>>> 
>>> 
>>> 
>>> And here's the httpd/access.log
>>> 
>>> 96.46.15.70 - - [22/Feb/2024:17:12:41 +] "GET /admin-toaster HTTP/1.1" 
>>> 401 381 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 
>>> (KHTML, like Gecko) Chrome/122.
>>> 0.0.0 Safari/537.36"
>>> 96.46.15.70 - admin [22/Feb/2024:17:12:41 +] "GET /admin-toaster 
>>> HTTP/1.1" 301 244 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) 
>>> AppleWebKit/537.36 (KHTML, like Gecko) Chrome/
>>> 122.0.0.0 Safari/537.36"
>>> 
>>> 
>>> 
>>> On 2/22/2024 10:45 AM, Eric Broch wrote:
 Can you check the httpd logs?
 
 On 2/22/2024 8:12 AM, Gary Bowling wrote:
> 
> Another issue. When I log in to admin-toaster, it properly asks for my 
> password and accepts it, but then all I get is this screen.
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Between the problems I'm having with roundcube and with qmailadmin, 
> something is very wrong with my install. I don't get any errors in the 
> logs, either in messages or httpd logs.
> 
> 
> 
> I can configure up a client on my desktop and log into the server using 
> IMAP and send/receive email. Granted I'm only sending to myself as there 
> is no mx record or proper dns for this server as it's not live.
> 
> 
> 
> 
> 
> 
> 
> On 2/21/2024 9:52 AM, Gary Bowling wrote:
>> My next challenge is to get roundcube working. My old server uses 
>> squirrel, but that's so old I need to move on. Which might be a bit of a 
>> challenge as I have some users who exclusively use web mail and have all 
>> their address books and everything in there.
>> 
>> 
>> 
>> At any rate, I first just tried going to my server/email.. I got a big 
>> list of errors, etc.
>> 
>> In poking around a bit, I discovered that there wasn't a 
>> /var/lib/roundcube directory, which is listed in the rpm.. Not sure why 
>> that was or if it's intended as maybe this is a customized version of 
>> roundcube. At any rate, I decided to do a yum reinstall on roundcube, 
>> which produced a /var/lib/roundcube dir.
>> 
>> But I still got the same big list of errors when going to server/email.
>> 
>> In looking at the roundcube configs in /etc/roundcube/.. I see the 
>> config.inc.php has the proper string in it with the p4ssw... password 
>> etc. So that looks ok.
>> 
>> Logging into  mysql with the roundcube user works, and the roundcube 
>> database is there with all the table structure. So that looks ok.
>> 
>> In looking at the roundcube config in httpd I noticed the "require 
>> local" rule, which I think means I can only access it from the local 
>> machine. Since my machine is a hosted machine, I can't do that. So I 
>> changed the to "require ip " ... that didn't resolve anything.
>> 
>> I'm off to do some other work for the rest of the day, but somehow I 
>> need to figure out what's going on here. There is very little in the 
>> logs and I'm running out of 

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

PHP 8.0.30 (cli) (built: Aug  3 2023 17:13:08) ( NTS gcc x86_64 )
Copyright (c) The PHP Group
Zend Engine v4.0.30, Copyright (c) Zend Technologies
with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies



> On Feb 22, 2024, at 09:21, Gary Bowling  wrote:
> 
> Thanks Eric.
> 
> Yep, just to not send a huge logfile. After having everything stopped for two 
> hrs, I started everything and went to the server/admin-toaster and got the 
> screen from below. It looks like a 401 response, which indicates a lack of 
> authentication credentials. And I'm not sure why. Probably something to do 
> with me copying over the admin.pass or admin.htpasswd from my old server. 
> That was part of the migration page.
> 
> Here's the httpd/error.log from that.
> 
> [Thu Feb 22 17:12:23.702465 2024] [suexec:notice] [pid 121153:tid 121153] 
> AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
> [Thu Feb 22 17:12:23.714703 2024] [so:warn] [pid 121153:tid 121153] AH01574: 
> module proxy_ajp_module is already loaded, skipping
> [Thu Feb 22 17:12:23.719266 2024] [lbmethod_heartbeat:notice] [pid 121153:tid 
> 121153] AH02282: No slotmem from mod_heartmonitor
> [Thu Feb 22 17:12:23.722704 2024] [mpm_event:notice] [pid 121153:tid 121153] 
> AH00489: Apache/2.4.57 (Rocky Linux) OpenSSL/3.0.7 configured -- resuming 
> normal operations
> [Thu Feb 22 17:12:23.722720 2024] [core:notice] [pid 121153:tid 121153] 
> AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'
> 
> 
> 
> 
> 
> And here's the httpd/access.log
> 
> 96.46.15.70 - - [22/Feb/2024:17:12:41 +] "GET /admin-toaster HTTP/1.1" 
> 401 381 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 
> (KHTML, like Gecko) Chrome/122.
> 0.0.0 Safari/537.36"
> 96.46.15.70 - admin [22/Feb/2024:17:12:41 +] "GET /admin-toaster 
> HTTP/1.1" 301 244 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) 
> AppleWebKit/537.36 (KHTML, like Gecko) Chrome/
> 122.0.0.0 Safari/537.36"
> 
> 
> 
> On 2/22/2024 10:45 AM, Eric Broch wrote:
>> Can you check the httpd logs?
>> 
>> On 2/22/2024 8:12 AM, Gary Bowling wrote:
>>> 
>>> Another issue. When I log in to admin-toaster, it properly asks for my 
>>> password and accepts it, but then all I get is this screen.
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Between the problems I'm having with roundcube and with qmailadmin, 
>>> something is very wrong with my install. I don't get any errors in the 
>>> logs, either in messages or httpd logs.
>>> 
>>> 
>>> 
>>> I can configure up a client on my desktop and log into the server using 
>>> IMAP and send/receive email. Granted I'm only sending to myself as there is 
>>> no mx record or proper dns for this server as it's not live.
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> On 2/21/2024 9:52 AM, Gary Bowling wrote:
 My next challenge is to get roundcube working. My old server uses 
 squirrel, but that's so old I need to move on. Which might be a bit of a 
 challenge as I have some users who exclusively use web mail and have all 
 their address books and everything in there.
 
 
 
 At any rate, I first just tried going to my server/email.. I got a big 
 list of errors, etc.
 
 In poking around a bit, I discovered that there wasn't a 
 /var/lib/roundcube directory, which is listed in the rpm.. Not sure why 
 that was or if it's intended as maybe this is a customized version of 
 roundcube. At any rate, I decided to do a yum reinstall on roundcube, 
 which produced a /var/lib/roundcube dir.
 
 But I still got the same big list of errors when going to server/email.
 
 In looking at the roundcube configs in /etc/roundcube/.. I see the 
 config.inc.php has the proper string in it with the p4ssw... password etc. 
 So that looks ok.
 
 Logging into  mysql with the roundcube user works, and the roundcube 
 database is there with all the table structure. So that looks ok.
 
 In looking at the roundcube config in httpd I noticed the "require local" 
 rule, which I think means I can only access it from the local machine. 
 Since my machine is a hosted machine, I can't do that. So I changed the to 
 "require ip " ... that didn't resolve anything.
 
 I'm off to do some other work for the rest of the day, but somehow I need 
 to figure out what's going on here. There is very little in the logs and 
 I'm running out of things to check.
 
 
 
 Here's the screen I get when I go to myserver/email, which seems to say 
 "everything is broken" haha..
 
 
 
 | | Author: Aleksander Machniak | 
 +-+
  */ // include environment require_once 'program/include/iniset.php'; // 
 init application, start session, init output class, etc. $RCMAIL = 
 rcmail::get_instance(0, isset($GLOBALS['env']) ? $GLOBALS['env'] : null); 
 // Make the whole PHP 

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

One thing to keep in mind right now you cannot auth with alias domain until you 
apple the patch that Eric created a moth ago as I discovered this problem.

Remo

--
Sent from iPhone

> On martedì, feb 20, 2024 at 11:23, Remo Mattei  (mailto:r...@mattei.org)> wrote:
> Well after you create the list you can do this:
>
>
>
> Qmail Toaster Help / Perl Help 
> (https://plug-discuss.phxlinux.narkive.com/e3hWI4px/qmail-toaster-help-perl-help)
> phxlinux.narkive.com 
> (https://plug-discuss.phxlinux.narkive.com/e3hWI4px/qmail-toaster-help-perl-help)
>
>
>
>
>
>
>
>
>
>
>
>
>
> cat lista3 | tr "," " " | while read USER DOMAIN PASSWORD ; do vadduser 
> $USER@$DOMAIN $PASSWORD; done
>
>
> From the shell
>
> To get the current pass you can do this:
>
> for i in $(cat lista); do vuserinfo $i...@italy1.com ; done|grep clear
>
> Then you can use the paste command like this:
>
> paste lista1 clear1|column -s $'\t' -t|tee lista3
>
>
> To give you an idea on how to make this happen. You will need to tweak it a 
> little to fit the command above :) or tweak the first command
>
> Remo
>
>
>
> > On Feb 20, 2024, at 09:48, Gary Bowling  wrote:
> >
> >
> >
> >
> >
> > I see the new versions were not compiled with --disable-many-domains. That 
> > looks like it was discussed in the list way back in 2011.
> >
> >
> > Back then, when that decision was made, there much have been a convenient 
> > way to migrate from one db structure to the other?
> >
> >
> >
> >
> >
> >
> >
> > Remo,
> >
> >
> >
> > Yes, but there are complications to doing that. I have many domains, many 
> > users, different quotas, aliases, etc.
> >
> >
> >
> > The command you sent.
> >
> >
> > Once you get the list of users
> >
> > for i in $(cat lista); do vadduser -r -q NOQUOTA $i...@domain.com ; done
> >
> > Thanks,gb
> >
> >
> >
> >
> >
> > On 2/20/2024 12:23 PM, Remo Mattei wrote:
> > > Hi Gary,
> > > Did you recall my email? I said create the domain on the new server, then 
> > > run the shell to create every user with password then sync from old to 
> > > new on all emails and you would have been set. The script may have been 
> > > changed Eric will know more about that but how I migrate which is a 
> > > little longer does not depend on the old mysql. I had issue in the past 
> > > so I just do that my own way and no issues at all.
> > >
> > > Remo
> > >
> > > > On Feb 20, 2024, at 09:20, Gary Bowling  
> > > > (mailto:g...@gbco.us) wrote:
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > hmm, looks like the db structure changed since my old install?? Is that 
> > > > correct?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > I created a new test domain in vpopmail with vadddomain which worked, 
> > > > then added a new user to that dummy domain.
> > > >
> > > >
> > > >
> > > > When I look at the db, it now has a vpopmail table that has the 
> > > > following structure.
> > > >
> > > >
> > > > mysql> select * from vpopmail;
> > > > ++---++++++-+-+
> > > > | pw_name | pw_domain | pw_passwd | pw_uid | pw_gid | pw_gecos | pw_dir 
> > > > | pw_shell | pw_clear_passwd |
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > My old server has a separate table for every domain, then the structure 
> > > > for each domain has this structure.
> > > >
> > > >
> > > > select * from gbco_us;
> > > > +++++-+---++--+
> > > > | pw_name | pw_passwd | pw_uid | pw_gid | pw_gecos | pw_dir | pw_shell 
> > > > | pw_clear_passwd |
> > > > +++++-+---++--+
>

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Well after you create the list you can do this:



https://plug-discuss.phxlinux.narkive.com/e3hWI4px/qmail-toaster-help-perl-help
cat lista3 | tr "," " " | while read USER DOMAIN PASSWORD ; do vadduser 
$USER@$DOMAIN $PASSWORD; done


From the shell 

To get the current pass you can do this:

for i in $(cat lista); do  vuserinfo $i...@italy1.com ; done|grep clear

Then you can use the paste command like this: 

paste lista1 clear1|column -s $'\t' -t|tee lista3


To give you an idea on how to make this happen. You will need to tweak it a 
little to fit the command above :)  or tweak the first command 

Remo 



> On Feb 20, 2024, at 09:48, Gary Bowling  wrote:
> 
> 
> 
> I see the new versions were not compiled with --disable-many-domains. That 
> looks like it was discussed in the list way back in 2011.
> 
> Back then, when that decision was made, there much have been a convenient way 
> to migrate from one db structure to the other?
> 
> 
> 
> Remo,
> 
> Yes, but there are complications to doing that. I have many domains, many 
> users, different quotas, aliases, etc.
> 
> The command you sent.
> 
> Once you get the list of users
> 
> for i in $(cat lista); do  vadduser -r -q NOQUOTA  $i...@domain.com ; done
> 
> Thanks,gb
> 
> 
> 
> On 2/20/2024 12:23 PM, Remo Mattei wrote:
>> Hi Gary, 
>> Did you recall my email? I said create the domain on the new server, then 
>> run the shell to create every user with password then sync from old to new 
>> on all emails and you would have been set. The script may have been changed  
>> Eric will know more about that but how I migrate which is a little longer 
>> does not depend on the old mysql. I had issue in the past so I just do that 
>> my own way and no issues at all. 
>> 
>> Remo
>> 
>>> On Feb 20, 2024, at 09:20, Gary Bowling  
>>> <mailto:g...@gbco.us> wrote:
>>> 
>>> 
>>> 
>>> hmm, looks like the db structure changed since my old install?? Is that 
>>> correct?
>>> 
>>> 
>>> 
>>> I created a new test domain in vpopmail with vadddomain which worked, then 
>>> added a new user to that dummy domain.
>>> 
>>> When I look at the db, it now has a vpopmail table that has the following 
>>> structure.
>>> 
>>> mysql> select * from vpopmail;
>>> ++---++++++-+-+
>>> | pw_name| pw_domain | pw_passwd  | pw_uid | 
>>> pw_gid | pw_gecos   | pw_dir | pw_shell 
>>>| pw_clear_passwd |
>>> 
>>> 
>>> 
>>> My old server has a separate table for every domain, then the structure for 
>>> each domain has this structure.
>>> 
>>> select * from gbco_us;
>>> +++++-+---++--+
>>> | pw_name| pw_passwd  | pw_uid | pw_gid | 
>>> pw_gecos| pw_dir| 
>>> pw_shell   | pw_clear_passwd  |
>>> +++++-+---++--+
>>> 
>>> 
>>> 
>>> The difference being the field "pw_domain"
>>> 
>>> 
>>> 
>>> So I guess the new structure has all the domains in the same table? If it 
>>> does, then I need to figure out how to migrate my old db to the new format.
>>> 
>>> 
>>> 
>>> Thanks, gb
>>> 
>>> 
>>> 
>>> On 2/20/2024 11:37 AM, Gary Bowling wrote:
>>>> 
>>>> Thanks Eric.
>>>> 
>>>> Continuing through the "migration" page. After going through everything 
>>>> moving configs and my database, then restarting. Toaststat says everything 
>>>> is ok.
>>>> 
>>>> 
>>>> 
>>>> So I tried a simple run of ~vpopmail/bin/vuserinfo g...@gbco.us 
>>>> <mailto:g...@gbco.us> just to query an account. I get this error 
>>>> 
>>>> mysql: sql error[3]: Table 'vpopmail.vpopmail' doesn't exist
>>>> 
>>>> 
>>>> 
>>>> Logging into the db and checking, indeed

Re: [qmailtoaster] Rocky 9 Migration

[Remo Mattei]

Hi Gary, 
Did you recall my email? I said create the domain on the new server, then run 
the shell to create every user with password then sync from old to new on all 
emails and you would have been set. The script may have been changed  Eric will 
know more about that but how I migrate which is a little longer does not depend 
on the old mysql. I had issue in the past so I just do that my own way and no 
issues at all. 

Remo

> On Feb 20, 2024, at 09:20, Gary Bowling  wrote:
> 
> 
> 
> hmm, looks like the db structure changed since my old install?? Is that 
> correct?
> 
> 
> 
> I created a new test domain in vpopmail with vadddomain which worked, then 
> added a new user to that dummy domain.
> 
> When I look at the db, it now has a vpopmail table that has the following 
> structure.
> 
> mysql> select * from vpopmail;
> ++---++++++-+-+
> | pw_name| pw_domain | pw_passwd  | pw_uid | 
> pw_gid | pw_gecos   | pw_dir | pw_shell   
>  | pw_clear_passwd |
> 
> 
> 
> My old server has a separate table for every domain, then the structure for 
> each domain has this structure.
> 
> select * from gbco_us;
> +++++-+---++--+
> | pw_name| pw_passwd  | pw_uid | pw_gid | 
> pw_gecos| pw_dir| 
> pw_shell   | pw_clear_passwd  |
> +++++-+---++--+
> 
> 
> 
> The difference being the field "pw_domain"
> 
> 
> 
> So I guess the new structure has all the domains in the same table? If it 
> does, then I need to figure out how to migrate my old db to the new format.
> 
> 
> 
> Thanks, gb
> 
> 
> 
> On 2/20/2024 11:37 AM, Gary Bowling wrote:
>> 
>> Thanks Eric.
>> 
>> Continuing through the "migration" page. After going through everything 
>> moving configs and my database, then restarting. Toaststat says everything 
>> is ok.
>> 
>> 
>> 
>> So I tried a simple run of ~vpopmail/bin/vuserinfo g...@gbco.us 
>>  just to query an account. I get this error 
>> 
>> mysql: sql error[3]: Table 'vpopmail.vpopmail' doesn't exist
>> 
>> 
>> 
>> Logging into the db and checking, indeed I do not have a vpopmail.vpopmail 
>> table. I have all the domain tables, etc. So I went back to my old server 
>> (the one this email is coming from) and it also does not have a 
>> vpopmail.vpopmail table.
>> 
>> I'm sure it has something to do with how old my existing server is. But how 
>> do I resolve this?
>> 
>> 
>> 
>> Thanks, gb
>> 
>> 
>> 
>> On 2/20/2024 10:00 AM, Eric Broch wrote:
>>> It's all good and there's nothing to do.
>>> 
>>> On 2/20/2024 7:11 AM, Gary Bowling wrote:
 
 Another question on my migration. On the qmailtoaster.com site, under the 
 RHEL9 derivative install heading. There is the qmail1.03-3.3.8 header and 
 underneath it is a link for "patches applied"
 
 I'm confused if that means. It implies that those patches are already 
 applied and there is no need to do them. But the link takes you to the 
 page for the patch like it's something we should apply.
 
 I'm pretty sure it's all good and there is nothing to do, just wanted to 
 make sure.
 
 
 
 Thanks, gb
 
 -- 
 
 The Moderns on Spotify  
 
 - To 
 unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
  For additional 
 commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
 -
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
  For additional 
 commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
 -
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Apple iPhone Mail refuse to connect to qmt.

[Remo Mattei]

Do you have another iPhone user? Have you tried with WiFi if the provider is 
not working disable data on the iPhone and use wireless to test

--
Sent from iPhone

> On martedì, feb 20, 2024 at 08:21, Tony White  (mailto:t...@ycs.com.au)> wrote:
> Hi folks,
> Nice ideas but the device is not even getting to
> the server. No entries in the logs visible. It almost
> seems the ISP is blocking anything but their mail servers.
> Yet an Android phone and pc, mac clients connect on issues.
> regards Anthony White Across Technology 4a Birmingham Rd, Mount Evelyn, 
> Victoria 3796 Mob 0481 362 743 acrosstechnology.com.au ALL CALLS ARE RECORDED
> On 21/2/24 02:00, Eric Broch wrote:
> >
> > Tony,
> >
> >
> > Did you have a look in the Dovecot log?
> >
> >
> >
> >
> >
> > On 2/20/2024 3:23 AM, Tony White wrote:
> > > Hi folks,
> > > I am at a loss.I have a customers iPhone 12 here and
> > > created an account for him but it states it cannot connect
> > > to the imap server. The settings are correct I have set up
> > > an Android on site and it works perfectly. It is ios 17.2.1.
> > >
> > >
> > > Any ideas greatly appreciated.
> > > -- regards Anthony White Across Technology 4a Birmingham Rd, Mount 
> > > Evelyn, Victoria 3796 Mob 0481 362 743 acrosstechnology.com.au ALL CALLS 
> > > ARE RECORDED

Re: [qmailtoaster] Apple iPhone Mail refuse to connect to qmt.

[Remo Mattei]

Check also maillog see what’s happening there from an iPhone user it’s hard to 
say without knowing exactly what step fails in or out? Did you try the ip 
instead of the dns name? Etc? Did you try roundcube access with that user?

--
Sent from iPhone

> On martedì, feb 20, 2024 at 07:00, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
>
> Tony,
>
>
> Did you have a look in the Dovecot log?
>
>
>
>
>
> On 2/20/2024 3:23 AM, Tony White wrote:
> > Hi folks,
> > I am at a loss.I have a customers iPhone 12 here and
> > created an account for him but it states it cannot connect
> > to the imap server. The settings are correct I have set up
> > an Android on site and it works perfectly. It is ios 17.2.1.
> >
> >
> > Any ideas greatly appreciated.
> > -- regards Anthony White Across Technology 4a Birmingham Rd, Mount Evelyn, 
> > Victoria 3796 Mob 0481 362 743 acrosstechnology.com.au ALL CALLS ARE 
> > RECORDED

Re: [qmailtoaster] OT - Question about Rocky Linux

[Remo Mattei]

Yes but that will be a lot of work to make it that containerized.. The link you 
sent is just a based Rocky.. and that’s a docker file which is even more diff. 

Ciao

> On Feb 19, 2024, at 15:39, David Bray  wrote:
> 
> Hey thanks
> and yeah - that would be based on https://hub.docker.com/_/rockylinux
> 
> which is maintained by Rocky Linux
> I think it would be solid
> 
> Cheers
> 
> David Bray
> e. da...@brayworth.com
> 
> February 20, 2024 9:23 AM, "Remo Mattei"  <mailto:r...@mattei.org?to=%22remo%20mattei%22%20%3cr...@mattei.org%3E>> 
> wrote:
> David, to make that a dockerized solution you will want to do the following:
> 1) container for qmail
> 2) container for mysql
> 3) container for httpd
> 4) container for dovecot
> 5 container for round cube
> My 2 cents.
> Remo
> 
> 
>> On Feb 19, 2024, at 15:20, David Bray > <mailto:da...@brayworth.com>> wrote:
>> You can probably setup QMail toaster under docker, it would negate any 
>> arguments
>> 
>> Cheers
>> 
>> David Bray
>> e. da...@brayworth.com <mailto:da...@brayworth.com>
>> 
>> February 19, 2024 8:26 AM, "Jeff Koch" > <mailto:jeffk...@intersessions.com?to=%22jeff%20koch%22%20%3cjeffk...@intersessions.com%3E>>
>>  wrote:
>> 
>> Hi - this is really OT but I trust the judgement of this group.
>> 
>> All of our servers are running CentOS 7 and we're little leery of the CentOS 
>> stream and with RedHat having taken over CentOS. However, we've been in the 
>> RH Linux eco-system for 25 years and SUSE, Debian and Ubuntu would be a 
>> tough adjustment. I hear a lot about Rocky Linux. Are you CentOS guys 
>> comfortable with Rocky Linux?
>> 
>> Jeff
>> 
>> On 2/18/2024 4:28 PM, Gary Bowling wrote:
>>> What is everyone doing with selinux on new Rocky 9 builds?
>>> 
>>> In the past, I've always disabled selinux. But maybe for some added 
>>> security it's time to do something different. I've learned a bit about 
>>> selinux and am using it successfully in my new web servers. But it comes 
>>> with some things already set up for nginx and standard web directories. It 
>>> will be a bit trickier with a "toaster."
>>> 
>>> Thanks, gb
>>> 
>>> --
>>> 
>>> The Moderns on Spotify  <https://distrokid.com/hyperfollow/themoderns/bbrs>
>>> 
>>> - To 
>>> unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com> For additional 
>>> commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>>> <mailto:qmailtoaster-list-h...@qmailtoaster.com>

Re: [qmailtoaster] OT - Question about Rocky Linux

[Remo Mattei]

David, to make that a dockerized solution you will want to do the following:

1) container for qmail
2) container for mysql
3) container for httpd
4) container for dovecot 
5 container for round cube

My 2 cents. 

Remo 

> On Feb 19, 2024, at 15:20, David Bray  wrote:
> 
> You can probably setup QMail toaster under docker, it would negate any 
> arguments
> 
> Cheers
> 
> David Bray
> e. da...@brayworth.com
> 
> February 19, 2024 8:26 AM, "Jeff Koch"  >
>  wrote:
> 
> Hi - this is really OT but I trust the judgement of this group.
> 
> All of our servers are running CentOS 7 and we're little leery of the CentOS 
> stream and with RedHat having taken over CentOS. However, we've been in the 
> RH Linux eco-system for 25 years and SUSE, Debian and Ubuntu would be a tough 
> adjustment. I hear a lot about Rocky Linux. Are you CentOS guys comfortable 
> with Rocky Linux?
> 
> Jeff
> 
> 
> On 2/18/2024 4:28 PM, Gary Bowling wrote:
>> What is everyone doing with selinux on new Rocky 9 builds?
>> 
>> In the past, I've always disabled selinux. But maybe for some added security 
>> it's time to do something different. I've learned a bit about selinux and am 
>> using it successfully in my new web servers. But it comes with some things 
>> already set up for nginx and standard web directories. It will be a bit 
>> trickier with a "toaster."
>> 
>> Thanks, gb
>> 
>> --
>> 
>> The Moderns on Spotify  
>> 
>> - To 
>> unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>>  For additional 
>> commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>> 

Re: [qmailtoaster] New Rocky Install

[Remo Mattei]

You cannot run both. Remove both run the install script let it finish.

--
Sent from iPhone

> On domenica, feb 18, 2024 at 18:52, Gary Bowling  (mailto:g...@gbco.us)> wrote:
>
>
>
>
>
> How do I get around this?
>
>
>
>
>
>
>
> yum install vpopmail
>
>
>
> Last metadata expiration check: 0:07:00 ago on Mon 19 Feb 2024 02:42:24 AM 
> UTC.
> Error:
> Problem: problem with installed package 
> mariadb-server-3:10.5.22-1.el9_2.x86_64
> - package mariadb-server-3:10.5.22-1.el9_2.x86_64 from @System conflicts with 
> mysql-server provided by mysql-server-8.0.32-1.el9_2.x86_64 from appstream
> - package mysql-server-8.0.32-1.el9_2.x86_64 from appstream conflicts with 
> mariadb-server provided by mariadb-server-3:10.5.22-1.el9_2.x86_64 from 
> @System
> - package mysql-server-8.0.32-1.el9_2.x86_64 from appstream conflicts with 
> mariadb-server provided by mariadb-server-3:10.5.22-1.el9_2.x86_64 from 
> appstream
> - package mariadb-server-3:10.5.22-1.el9_2.x86_64 from appstream conflicts 
> with mysql-server provided by mysql-server-8.0.32-1.el9_2.x86_64 from 
> appstream
> - package vpopmail-5.4.33-5.qt.el9.x86_64 from qmt-testing requires 
> mysql-server, but none of the providers can be installed
> - conflicting requests
>
>
>
> Thanks, gb
>
>
>
>
>
>
> On 2/18/2024 8:59 PM, Remo Mattei wrote:
> > Gary nah!!
> >
> > Remo
> >
> > > On Sunday, Feb 18, 2024 at 17:51, Gary Bowling  > > (mailto:g...@gbco.us)> wrote:
> > >
> > > Yea, but you're a lot smarter than I am! haha.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > gb
> > >
> > >
> > >
> > >
> > >
> > >
> > > On 2/18/2024 8:38 PM, Remo Mattei wrote:
> > > > Hi I do not think so I just build two new qmail rocky9 using the script 
> > > > no issue whatsoever to migrate I had to do a little manic here and 
> > > > there not too bad so run the fresh install then migrate your users all 
> > > > good.
> > > >
> > > > --
> > > > Sent from iPhone
> > > >
> > > > > On domenica, feb 18, 2024 at 17:26, Gary Bowling  > > > > (mailto:g...@gbco.us)> wrote:
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks, yea I understand. It's just the script calls and tries to 
> > > > > install mysql. In your migration a while back, Eric had said that 
> > > > > what he would do is follow the migration steps on the web site. Which 
> > > > > runs qt_install first.
> > > > >
> > > > >
> > > > >
> > > > > qt_install seems a bit out of date to me. I guess I just need to go 
> > > > > through qt_install line by line and manually and make some changes 
> > > > > for my environment.
> > > > >
> > > > >
> > > > > Thanks, I'll work on it some more...
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > gb
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 2/18/2024 8:19 PM, Remo Mattei wrote:
> > > > > > You can use Maria or MySQL on the new one just dump and import  
> > > > > > should be just fine.
> > > > > >
> > > > > > --
> > > > > > Sent from iPhone
> > > > > >
> > > > > > > On domenica, feb 18, 2024 at 16:52, Gary Bowling  > > > > > > (mailto:g...@gbco.us)> wrote:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > AH, I also see that the qt_install tries to install mysql-server. 
> > > > > > > My old toaster already has mariadb installed.
> > > > > > >
> > > > > > >
> > > > > > > I'm trying to install a new Rocky 9 and migrate my old Centos 7 
> > > > > > > server over.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >

Re: [qmailtoaster] New Rocky Install

[Remo Mattei]

Gary nah!!

Remo

> On Sunday, Feb 18, 2024 at 17:51, Gary Bowling  (mailto:g...@gbco.us)> wrote:
>
> Yea, but you're a lot smarter than I am! haha.
>
>
>
>
>
>
>
> gb
>
>
>
>
>
>
> On 2/18/2024 8:38 PM, Remo Mattei wrote:
> > Hi I do not think so I just build two new qmail rocky9 using the script no 
> > issue whatsoever to migrate I had to do a little manic here and there not 
> > too bad so run the fresh install then migrate your users all good.
> >
> > --
> > Sent from iPhone
> >
> > > On domenica, feb 18, 2024 at 17:26, Gary Bowling  > > (mailto:g...@gbco.us)> wrote:
> > >
> > >
> > >
> > >
> > >
> > > Thanks, yea I understand. It's just the script calls and tries to install 
> > > mysql. In your migration a while back, Eric had said that what he would 
> > > do is follow the migration steps on the web site. Which runs qt_install 
> > > first.
> > >
> > >
> > >
> > > qt_install seems a bit out of date to me. I guess I just need to go 
> > > through qt_install line by line and manually and make some changes for my 
> > > environment.
> > >
> > >
> > > Thanks, I'll work on it some more...
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > gb
> > >
> > >
> > >
> > >
> > >
> > >
> > > On 2/18/2024 8:19 PM, Remo Mattei wrote:
> > > > You can use Maria or MySQL on the new one just dump and import  
> > > > should be just fine.
> > > >
> > > > --
> > > > Sent from iPhone
> > > >
> > > > > On domenica, feb 18, 2024 at 16:52, Gary Bowling  > > > > (mailto:g...@gbco.us)> wrote:
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > AH, I also see that the qt_install tries to install mysql-server. My 
> > > > > old toaster already has mariadb installed.
> > > > >
> > > > >
> > > > > I'm trying to install a new Rocky 9 and migrate my old Centos 7 
> > > > > server over.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > I'm running the qt_install that was specified in the RHEL9 derivative 
> > > > > section on this page..
> > > > >
> > > > >
> > > > >
> > > > > http://www.qmailtoaster.com/index.html
> > > > >
> > > > >
> > > > > Which was the first step in the migration section listed here.
> > > > >
> > > > >
> > > > > http://www.qmailtoaster.com/migrate.html
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > I have my old server running and will install this one and make sure 
> > > > > it's all ok prior to cutting over. So I have some time. Any help 
> > > > > would be appreciated.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Thanks, gb
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 2/18/2024 7:39 PM, Gary Bowling wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Per the previous question about Rocky.. I'm in the process of doing 
> > > > > > a Rocky 9 install right now! So yes, I believe it's the way to go, 
> > > > > > although I'm not an expert.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > My problem right now is... I ran qt_install per the instructions.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > After a while, it pop

Re: [qmailtoaster] New Rocky Install

[Remo Mattei]

Hi I do not think so I just build two new qmail rocky9 using the script no 
issue whatsoever to migrate I had to do a little manic here and there not too 
bad so run the fresh install then migrate your users all good.

--
Sent from iPhone

> On domenica, feb 18, 2024 at 17:26, Gary Bowling  (mailto:g...@gbco.us)> wrote:
>
>
>
>
>
> Thanks, yea I understand. It's just the script calls and tries to install 
> mysql. In your migration a while back, Eric had said that what he would do is 
> follow the migration steps on the web site. Which runs qt_install first.
>
>
>
> qt_install seems a bit out of date to me. I guess I just need to go through 
> qt_install line by line and manually and make some changes for my environment.
>
>
> Thanks, I'll work on it some more...
>
>
>
>
>
>
>
> gb
>
>
>
>
>
>
> On 2/18/2024 8:19 PM, Remo Mattei wrote:
> > You can use Maria or MySQL on the new one just dump and import  should be 
> > just fine.
> >
> > --
> > Sent from iPhone
> >
> > > On domenica, feb 18, 2024 at 16:52, Gary Bowling  > > (mailto:g...@gbco.us)> wrote:
> > >
> > >
> > >
> > >
> > >
> > > AH, I also see that the qt_install tries to install mysql-server. My old 
> > > toaster already has mariadb installed.
> > >
> > >
> > > I'm trying to install a new Rocky 9 and migrate my old Centos 7 server 
> > > over.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > I'm running the qt_install that was specified in the RHEL9 derivative 
> > > section on this page..
> > >
> > >
> > >
> > > http://www.qmailtoaster.com/index.html
> > >
> > >
> > > Which was the first step in the migration section listed here.
> > >
> > >
> > > http://www.qmailtoaster.com/migrate.html
> > >
> > >
> > >
> > >
> > >
> > >
> > > I have my old server running and will install this one and make sure it's 
> > > all ok prior to cutting over. So I have some time. Any help would be 
> > > appreciated.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Thanks, gb
> > >
> > >
> > >
> > >
> > >
> > >
> > > On 2/18/2024 7:39 PM, Gary Bowling wrote:
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Per the previous question about Rocky.. I'm in the process of doing a 
> > > > Rocky 9 install right now! So yes, I believe it's the way to go, 
> > > > although I'm not an expert.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > My problem right now is... I ran qt_install per the instructions.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > After a while, it pops up asking for a mysql password. I didn't know 
> > > > what to put in, tried the root password, it failed and now the script 
> > > > continues on. But there are errors because I wasn't able to put in the 
> > > > right password. So two questions.
> > > >
> > > >
> > > >
> > > > 1. What should the mysql password be?
> > > >
> > > >
> > > > 2. When it finishes, what should I do? I guess I could run it again, 
> > > > it's not operational yet, so maybe running again and putting in the 
> > > > right mysql password would get me back on track.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Please advise..
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Thanks, gb
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > 
> > > > The Moderns on Spotify 
> > > > (https://distrokid.com/hyperfollow/themoderns/bbrs)
> > > > 
> > > > - 
> > > > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
> > > > (mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com) For additional 
> > > > commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
> > > > (mailto:qmailtoaster-list-h...@qmailtoaster.com) 
> > > > - 
> > > > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
> > > > (mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com) For additional 
> > > > commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
> > > > (mailto:qmailtoaster-list-h...@qmailtoaster.com) 
> > > > - 
> > > > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
> > > > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] New Rocky Install

[Remo Mattei]

You can use Maria or MySQL on the new one just dump and import  should be 
just fine.

--
Sent from iPhone

> On domenica, feb 18, 2024 at 16:52, Gary Bowling  (mailto:g...@gbco.us)> wrote:
>
>
>
>
>
> AH, I also see that the qt_install tries to install mysql-server. My old 
> toaster already has mariadb installed.
>
>
> I'm trying to install a new Rocky 9 and migrate my old Centos 7 server over.
>
>
>
>
>
>
>
> I'm running the qt_install that was specified in the RHEL9 derivative section 
> on this page..
>
>
>
> http://www.qmailtoaster.com/index.html
>
>
> Which was the first step in the migration section listed here.
>
>
> http://www.qmailtoaster.com/migrate.html
>
>
>
>
>
>
> I have my old server running and will install this one and make sure it's all 
> ok prior to cutting over. So I have some time. Any help would be appreciated.
>
>
>
>
>
>
>
> Thanks, gb
>
>
>
>
>
>
> On 2/18/2024 7:39 PM, Gary Bowling wrote:
> >
> >
> >
> >
> >
> > Per the previous question about Rocky.. I'm in the process of doing a Rocky 
> > 9 install right now! So yes, I believe it's the way to go, although I'm not 
> > an expert.
> >
> >
> >
> >
> >
> >
> >
> > My problem right now is... I ran qt_install per the instructions.
> >
> >
> >
> >
> >
> >
> >
> > After a while, it pops up asking for a mysql password. I didn't know what 
> > to put in, tried the root password, it failed and now the script continues 
> > on. But there are errors because I wasn't able to put in the right 
> > password. So two questions.
> >
> >
> >
> > 1. What should the mysql password be?
> >
> >
> > 2. When it finishes, what should I do? I guess I could run it again, it's 
> > not operational yet, so maybe running again and putting in the right mysql 
> > password would get me back on track.
> >
> >
> >
> >
> >
> >
> >
> > Please advise..
> >
> >
> >
> >
> >
> >
> > Thanks, gb
> >
> >
> >
> >
> >
> >
> > --
> > 
> > The Moderns on Spotify (https://distrokid.com/hyperfollow/themoderns/bbrs)
> > 
> > - To 
> > unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
> > (mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com) For additional 
> > commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
> > (mailto:qmailtoaster-list-h...@qmailtoaster.com) 
> > - To 
> > unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For 
> > additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] OT - Question about Rocky Linux

[Remo Mattei]

Just to share my two cents the official name is Red Hat all other variants are 
bad. They teach you that the first day at Red Hat.

Ciao.

--
Sent from iPhone

> On domenica, feb 18, 2024 at 16:11, Angus McIntyre  (mailto:an...@pobox.com)> wrote:
> Remo Mattei wrote on 2/18/24 5:40 PM:
> > Nevertheless, I would not change Rocky Linux to others at this point.
> > It rocks. If you have been a Red Hat customer and CentOS then you are
> > perfect to become a Rocky guy.
>
> Is Rocky the approved/most-recommended OS for qmailtoaster these days?
> (I believe Alma is also a contender, and there may be others).
>
> I wrote an ansible role to deploy qmailtoaster on CentOS 8 and had it
> just about ready to share when RedHat killed CentOS 8. I'm
> understandably a little wary of trying to repeat the exercise with
> whatever is the new hotness until I'm sure that the new hotness is going
> to stick around for a few years.
>
> Angus
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

Re: [qmailtoaster] OT - Question about Rocky Linux

[Remo Mattei]

Hi, 
Here is my signature at work

RHCSA / RHCE / Red Hat OpenStack Certified (140-055-005)


Nevertheless, I would not change Rocky Linux to others at this point. It rocks. 
If you have been a Red Hat customer and CentOS then you are perfect to become a 
Rocky guy.  

IMO as good as Ubuntu seems to be I am still a RPM guy :) and SUSE has always 
tried to be the Red Hat beater. 

Remo 

> On Feb 18, 2024, at 14:26, Jeff Koch  wrote:
> 
> 
> Hi - this is really OT but I trust the judgement of this group.  
> 
> All of our servers are running CentOS 7 and we're little leery of the CentOS 
> stream and with RedHat having taken over CentOS.  However, we've been in the 
> RH Linux eco-system for 25 years and SUSE, Debian and Ubuntu would be a tough 
> adjustment. I hear a lot about Rocky Linux.  Are you CentOS guys comfortable 
> with Rocky Linux?
> 
> Jeff
> 
> 
> 
> On 2/18/2024 4:28 PM, Gary Bowling wrote:
>> 
>> What is everyone doing with selinux on new Rocky 9 builds?
>> 
>> 
>> 
>> In the past, I've always disabled selinux. But maybe for some added security 
>> it's time to do something different. I've learned a bit about selinux and am 
>> using it successfully in my new web servers. But it comes with some things 
>> already set up for nginx and standard web directories. It will be a bit 
>> trickier with a "toaster."
>> 
>> 
>> 
>> Thanks, gb
>> 
>> -- 
>> 
>> The Moderns on Spotify  
>> 
>> - To 
>> unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>>  For additional 
>> commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>> 

Re: [qmailtoaster] Talk_faster_next_time

[Remo Mattei]

Test 

> On Feb 10, 2024, at 21:30, Eric Broch  wrote:
> 
> Can you bump the idle timeout up to a couple minutes
> On Feb 10, 2024, at 8:53 PM, Jeff Koch  > wrote:
>> 
>> Hi List:
>> 
>> Maybe you can advise on this.
>> 
>> I am sending an email with a 23MB attachment from one QMT mailserver to 
>> another. Both QMT server are on the same AWS network. However, the email 
>> gets deferred with:
>> 
>> 21:03:30.201449500 starting delivery 513699: msg 397530692 
>> 
>> 21:04:10.328736500 delivery 513699: 
>> deferral:..failed_after_I_sent_the_message./Remote_host_said:_421_Tim
>> eout._Talk_faster_next_time./
>> 
>> 
>> Any idea what I should look at? It's only 40 seconds from the start of the 
>> delivery to the 'Timeout'.
>> 
>> Spamdyke timeout settings on the receiving server:
>> 
>> idle-timeout-secs=30
>> connection-timeout-secs=1800
>> 
>> Thanks,  Jeff Koch

Re: [qmailtoaster] BIMI support

[Remo Mattei]

Got it thanks yeah crazy price.

Thanks

--
Sent from iPhone

> On martedì, feb 13, 2024 at 21:03, Remo Mattei  (mailto:r...@mattei.org)> wrote:
> Helo Jaime,
> Not sure but google says:
>
> The primary feature of BIMI is the ability to display your logo on your email 
> in recipient inboxes. More and more email clients are adopting BIMI to 
> encourage brands to verify their logo for official use. The best part is that 
> there's no fee to verify your logo for BIMI. It's a free process available to 
> all parties.
>
> Where did you see the fee option?
>
> o
>
> > On Feb 13, 2024, at 17:13, Remo Mattei  wrote:
> >
> > Hello guys,
> >
> > Has anyone setup BIMI on the qmail server? Any valuable info?
> >
> > Thanks,
> > Remo
> >
> > -
> > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> >
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

Re: [qmailtoaster] BIMI support

[Remo Mattei]

Helo Jaime, 
Not sure but google says:

The primary feature of BIMI is the ability to display your logo on your email 
in recipient inboxes. More and more email clients are adopting BIMI to 
encourage brands to verify their logo for official use. The best part is that 
there's no fee to verify your logo for BIMI. It's a free process available to 
all parties.

Where did you see the fee option?

o

> On Feb 13, 2024, at 17:13, Remo Mattei  wrote:
> 
> Hello guys, 
> 
> Has anyone setup BIMI on the qmail server? Any valuable info?
> 
> Thanks, 
> Remo 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] BIMI support

[Remo Mattei]

Hello guys, 

Has anyone setup BIMI on the qmail server? Any valuable info?

Thanks, 
Remo 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Talk_faster_next_time

[Remo Mattei]

My guess is lookup try to add or change dns server or put something in the host 
file see what happen.

--
Sent from iPhone

> On sabato, feb 10, 2024 at 19:53, Jeff Koch  (mailto:jeffk...@intersessions.com)> wrote:
> Hi List:
>
> Maybe you can advise on this.
>
> I am sending an email with a 23MB attachment from one QMT mailserver to 
> another. Both QMT server are on the same AWS network. However, the email gets 
> deferred with:
>
> 21:03:30.201449500 starting delivery 513699: msg 397530692
>
> 21:04:10.328736500 delivery 513699: 
> deferral:..failed_after_I_sent_the_message./Remote_host_said:_421_Tim
> eout._Talk_faster_next_time./
>
>
> Any idea what I should look at? It's only 40 seconds from the start of the 
> delivery to the 'Timeout'.
>
> Spamdyke timeout settings on the receiving server:
>
> idle-timeout-secs=30
> connection-timeout-secs=1800
>
> Thanks, Jeff Koch

Re: [qmailtoaster] test

[Remo Mattei]

Test back

> On Feb 6, 2024, at 15:49, ebr...@whitehorsetc.com wrote:
> 
> test
> 

Re: [qmailtoaster] Receiving repeat copies of large files from gmail

[Remo Mattei]

Hi Jeff, 
Did you check if other type do the same? Like a photo, word etc? 

> On Feb 6, 2024, at 15:04, Jeff Koch  wrote:
> 
> 
> Hi List:
> 
> One of our users receives email with large excel file attachments - over 20MB 
> - from a gmail and Outlook accounts. He reported that with these very large 
> emails he's getting multiple copies with a new copy coming every couple of 
> hours.
> 
> I checked his inbox and these are identical complete emails except for the 
> 'part' codes withing the email body. It seems as if gmail is not getting the 
> proper message received response from out QMT mailserver and, as a result, 
> resend the email.
> 
> Has anybody else seen something like this?  I don't think it's a timeout on 
> our end because the emails are complete. Nor is it a size issue since we have 
> databytes set to 60 MB.
> 
> Any ideas on what I should look at?
> 
> Regards, Jeff Koch
> 
> 
> 
> 

Re: [qmailtoaster] Adding additional DKIM signatures to an email

[Remo Mattei]

Here is mine



  
  

  
  


  
http://domain2.com/> domain=“domain2.com" 
keyfile="/var/qmail/control/dkim/domain2.com.key" selector="dkim1">


  
 


 



 





Remo


> On Jan 31, 2024, at 09:06, Jeff Koch  wrote:
> 
> 
> Hi List
> 
> We've had a request from a client that uses one of our QMT mailservers. He 
> wants to know if we can add an additional DKIM signature to the emails his 
> sends. Currently we sign all emails with the DKIM key associated with the 
> host name of the mailserver. I suppose this would be an additional signature 
> created by his key and validated by the DKIM entry in his DNS zone.
> 
> Any thoughts?
> 
> Regards, Jeff Koch
> 

Re: [qmailtoaster] Segfault 14 error 6 adding a new email account.

[Remo Mattei]

Did you try from the cli?

--
Sent from iPhone

> On mercoledì, gen 31, 2024 at 03:59, Tony White  (mailto:t...@ycs.com.au)> wrote:
> Hi folks,
> I am getting a segfault 14 error 6 when adding a new email account to any 
> domain
> after the initial segfault.
> I hope someone can offer a reason and or a solution. I am stumped.
>
> dmesg log
> [10390.977162] toaster.vqadmin[61793]: segfault at 14 ip 55ab15543ae6 sp 
> 7ffec4613410 error 6 in toaster.vqadmin[55ab1553c000+23000]
> [10390.978162] Code: 0f 45 c2 89 c2 83 ca 01 48 83 7c 24 18 00 0f 45 c2 89 c2 
> 83 ca 20 48 83 7c 24 28 00 0f 45 c2 89 c2 80 ce 10 4d 85 ff 0f 45 c2 <89> 45 
> 14 4d 85 e4 74 07 41 80 3c 24 00 75 73 48 8d 35 64 b9 21 00
>
>
> Rocky Linux release 8.9 (Green Obsidian)
> NAME="Rocky Linux"
> VERSION="8.9 (Green Obsidian)"
> ID="rocky"
> ID_LIKE="rhel centos fedora"
> VERSION_ID="8.9"
> PLATFORM_ID="platform:el8"
> PRETTY_NAME="Rocky Linux 8.9 (Green Obsidian)"
> ANSI_COLOR="0;32"
> LOGO="fedora-logo-icon"
> CPE_NAME="cpe:/o:rocky:rocky:8:GA"
> HOME_URL="https://rockylinux.org/; (https://rockylinux.org/)
> BUG_REPORT_URL="https://bugs.rockylinux.org/; (https://bugs.rockylinux.org/)
> SUPPORT_END="2029-05-31"
> ROCKY_SUPPORT_PRODUCT="Rocky-Linux-8"
> ROCKY_SUPPORT_PRODUCT_VERSION="8.9"
> REDHAT_SUPPORT_PRODUCT="Rocky Linux"
> REDHAT_SUPPORT_PRODUCT_VERSION="8.9"
> Rocky Linux release 8.9 (Green Obsidian)
> Rocky Linux release 8.9 (Green Obsidian)
> Derived from Red Hat Enterprise Linux 8.9
> Rocky Linux release 8.9 (Green Obsidian)
> cpe:/o:rocky:rocky:8:GA
>
> -- regards Anthony White

Re: [qmailtoaster] Migrate from CentOS 7 to Alma 9.3

[Remo Mattei]

I do have a vpopmail you can import it from your old box but normally the 
script creates that for you. At least it does on rocky 9.

Remo

--
Sent from iPhone

> On domenica, gen 28, 2024 at 20:06, Peter Peterse 
> mailto:pe...@peterse-uithuizen.com)> wrote:
>
> Hi Remo,
>
>
> That part looks just like mine. It comes from: 
> https://raw.githubusercontent.com/qmtoaster/scripts/master/dovecot-sql.conf.ext
>
>
> Do you have a table vpopmail? I don't and also don't understand where it 
> should be created.
>
>
> Peter
>
>
>
>
>
>
> On 28-1-2024 19:57, Remo Mattei wrote:
> > Here is mine
> >
> > default_pass_scheme = MD5-CRYPT
> >
> >
> > # passdb query to retrieve the password. It can return fields:
> > password_query = SELECT CONCAT( pw_name ,'@', pw_domain ) AS user, \
> > pw_passwd AS password, \
> > pw_dir as userdb_home, \
> > 89 AS userdb_uid, \
> > 89 AS userdb_gid \
> > FROM vpopmail vp \
> > LEFT JOIN aliasdomains ad ON ad.alias = '%d' \
> > WHERE ( vp.pw_domain = ad.domain OR vp.pw_domain = '%d') AND ( vp.pw_name = 
> > '%n' )
> >
> >
> > #password_query = SELECT CONCAT(pw_name, '@', '%d') AS user, \
> > # pw_passwd AS password, \
> > # pw_dir as userdb_home, \
> > # 89 AS userdb_uid, \
> > # 89 AS userdb_gid \
> > # FROM `vpopmail` \
> > # WHERE pw_name = '%n' AND pw_domain = '%d'
> >
> > # userdb query to retrieve the user information. It can return fields:
> > # (Thanks to Arturo Blanco for his hints concerning vpopmail limits)
> > user_query = \
> > SELECT pw_dir AS home, \
> > 89 AS uid, \
> > 89 AS gid \
> > FROM vpopmail \
> > WHERE pw_name = '%n' AND pw_domain = '%d' \
> > AND ('%a'!='995' or !(pw_gid & 2)) \
> > AND ('%r'!='[WEBMAIL-IP]' or !(pw_gid & 4)) \
> > AND ('%r'='[WEBMAIL-IP]' or '%a'!='993' or !(pw_gid & 8))
> >
> > # [WEBMAIL-IP] is the IP of your webmail web server.
> > # I'm assuming that the imap connection is only on port 993 and the pop3 
> > connection is on port 955.
> > # Adjust to your needs
> > #
> > # logically this means:
> > # SELECT user
> > # WHEN POP is not disabled for that user connecting on port 995 (995 is the 
> > pop3s port allowed from remote in my configuration)
> > # AND WHEN webmail access is not disabled for that user when connecting 
> > from [WEBMAIL-IP]
> > # AND WHEN IMAP is not disabled for that user connecting on port 993 (993 
> > is the imaps port allowed from remote
> > # in my configuration) unless his remote ip the one belonging to the webmail
> >
> > # Query to get a list of all usernames.
> > iterate_query = SELECT CONCAT(pw_name,'@',pw_domain) AS username FROM 
> > `vpopmail`
> >
> >
> >
> > Here is my dovecot.conf part
> >
> > protocol imap {
> > imap_client_workarounds = "delay-newmail"
> > mail_plugins = $mail_plugins imap_quota
> > mail_max_userip_connections = 150
> > }
> >
> > protocol pop3 {
> > pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
> > pop3_fast_size_lookups = yes
> > pop3_lock_session = yes
> > mail_max_userip_connections = 50
> > # pop3_uidl_format = UID%u-%v
> > }
> >
> > plugin {
> > quota = maildir:ignore=Trash
> > quota_rule = ?:storage=0
> > }
> >
> > passdb {
> > driver = sql
> > args = /etc/dovecot/dovecot-sql.conf.ext
> > }
> >
> > userdb {
> > driver = sql
> > args = /etc/dovecot/dovecot-sql.conf.ext
> > }
> >
> >
> >
> > service stats {
> > # unix_listener stats-reader {
> > # group =
> > # mode = 0666
> > # user =
> > # }
> > unix_listener stats-writer {
> > group = dovecot
> > mode = 0666
> > #user =
> > }
> > }
> >
> > !include local.conf
> >
> >
> >
> >
> > > On Jan 28, 2024, at 19:33, Peter Peterse  
> > > (mailto:pe...@peterse-uithuizen.com) wrote:
> > >
> > > Hello,
> > >
> > >
> > > Remo, thanks fot the fast answer. I've changed the file 
> > > /etc/dovecot/dovecot.conf back to how it was after the script qt_install.
> > >
> > >
> > > Dovecot logs now:
> > >
> > >
> > > Jan 28 18:24:28 auth-worker(63869): Warning: sqlpool(mysql): Query 
> > > failed, retrying: Table 'vpopmail.vpopmail' doesn't exist
> > > Jan 28 18:24:28 auth-worker(63869): Error: conn unix:auth-worker 
> > > (pid=63867,uid=97

Re: [qmailtoaster] Migrate from CentOS 7 to Alma 9.3

[Remo Mattei]

Here is mine

default_pass_scheme = MD5-CRYPT


# passdb query to retrieve the password. It can return fields:
password_query = SELECT CONCAT( pw_name ,'@', pw_domain ) AS user, \
 pw_passwd AS password, \
 pw_dir as userdb_home, \
 89 AS userdb_uid, \
 89 AS userdb_gid \
 FROM vpopmail vp \
 LEFT JOIN aliasdomains ad ON ad.alias = '%d' \
 WHERE  ( vp.pw_domain = ad.domain  OR vp.pw_domain = '%d') AND ( 
vp.pw_name = '%n' )


#password_query = SELECT CONCAT(pw_name, '@', '%d') AS user, \
#  pw_passwd AS password, \
#  pw_dir as userdb_home, \
#  89 AS userdb_uid, \
#  89 AS userdb_gid \
#  FROM `vpopmail` \
#  WHERE pw_name = '%n' AND pw_domain = '%d'

# userdb query to retrieve the user information. It can return fields:
# (Thanks to Arturo Blanco for his hints concerning vpopmail limits)
user_query = \
  SELECT pw_dir AS home, \
  89 AS uid, \
  89 AS gid \
  FROM vpopmail \
  WHERE pw_name = '%n' AND pw_domain = '%d' \
  AND ('%a'!='995' or !(pw_gid & 2)) \
  AND ('%r'!='[WEBMAIL-IP]' or !(pw_gid & 4)) \
  AND ('%r'='[WEBMAIL-IP]' or '%a'!='993' or !(pw_gid & 8))

# [WEBMAIL-IP] is the IP of your webmail web server.
# I'm assuming that the imap connection is only on port 993 and the pop3 
connection is on port 955.
# Adjust to your needs
#
# logically this means:
# SELECT user
# WHEN POP is not disabled for that user connecting on port 995 (995 is the 
pop3s port allowed from remote in my configuration)
# AND WHEN webmail access is not disabled for that user when connecting from 
[WEBMAIL-IP]
# AND WHEN IMAP is not disabled for that user connecting on port 993 (993 is 
the imaps port allowed from remote
# in my configuration) unless his remote ip the one belonging to the webmail

# Query to get a list of all usernames.
iterate_query = SELECT CONCAT(pw_name,'@',pw_domain) AS username FROM `vpopmail`



Here is my dovecot.conf part

protocol imap {
  imap_client_workarounds = "delay-newmail"
  mail_plugins = $mail_plugins imap_quota
  mail_max_userip_connections = 150
}

protocol pop3 {
  pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
  pop3_fast_size_lookups = yes
  pop3_lock_session = yes
  mail_max_userip_connections = 50
# pop3_uidl_format = UID%u-%v
}

plugin {
  quota = maildir:ignore=Trash
  quota_rule = ?:storage=0
}

passdb {
  driver = sql
  args = /etc/dovecot/dovecot-sql.conf.ext
}

userdb {
  driver = sql
  args = /etc/dovecot/dovecot-sql.conf.ext
}



service stats {
# unix_listener stats-reader {
# group =
# mode = 0666
# user =
#   }
   unix_listener stats-writer {
 group = dovecot
 mode = 0666
#user =
   }
  }

!include local.conf




> On Jan 28, 2024, at 19:33, Peter Peterse  wrote:
> 
> Hello,
> 
> Remo, thanks fot the fast answer. I've changed the file 
> /etc/dovecot/dovecot.conf back to how it was after the script qt_install.
> 
> Dovecot logs now:
> 
> Jan 28 18:24:28 auth-worker(63869): Warning: sqlpool(mysql): Query failed, 
> retrying: Table 'vpopmail.vpopmail' doesn't exist
> Jan 28 18:24:28 auth-worker(63869): Error: conn unix:auth-worker 
> (pid=63867,uid=97): auth-worker<1>: sql(pe...@example.com,::1 
> <mailto:pe...@example.com,::1>,): Password 
> query failed: Table 'vpopmail.vpopmail' doesn't exist
> 
> In the file dovecot-sql.conf.ext the credentials are correct and the database 
> vpopmail exists but there is no table vpopmail created, so probebly this is 
> the problem. Where is this table created?
> 
> Regards,
> 
> Peter Peterse
> 
> On 28-1-2024 18:52, Remo Mattei wrote:
>> 
>> It’s now sql not vpopmail 
>> 
>> --
>> Sent from iPhone 
>> 
>> On domenica, gen 28, 2024 at 18:41, Peter Peterse 
>> mailto:pe...@peterse-uithuizen.com>> wrote:
>> Hello list, 
>> 
>> I'm trying to migrate from CentOS 7 to AlmaLinux 9.3. I'm using the 
>> steps from: 
>> 
>> http://qtp.qmailtoaster.com/#rhel9 
>> 
>> and 
>> 
>> http://www.qmailtoaster.com/migrate.html 
>> 
>> In this process I've changed the database passwords in the files: 
>> 
>> /home/vpopmail/etc/vpopmail.mysql 
>> /etc/roundcubemail/config.inc.php 
>> /etc/dovecot/dovecot-sql.conf.ext 
>> /etc/dspam.conf 
>> 
>> After starting the mailserver and logging in with roundcube the logs 
>> from dovecot says: 
>> 
>> Jan 28 17:29:53 master: Info: Dovecot v2.3.16 (7e2e900c1a) starting up 
>> for imap, pop3 (core dumps disabled) 
>> Jan 28 17:30:15 auth: Fatal: Unknown passdb driver 'vpopmail' 
>> Jan 28 17:30:15 master: Error: service(auth): command startup failed, 
>> throttling for 2.000 secs 
>> 
>> Does anyone knows what I've missed? 
>> 
>> Thanks for the help. 
>> 
>> Peter Peterse 
>> 
>> 
>> - 
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com> 
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>> <mailto:qmailtoaster-list-h...@qmailtoaster.com> 
>> 

Re: [qmailtoaster] Migrate from CentOS 7 to Alma 9.3

[Remo Mattei]

It’s now sql not vpopmail

--
Sent from iPhone

> On domenica, gen 28, 2024 at 18:41, Peter Peterse 
> mailto:pe...@peterse-uithuizen.com)> wrote:
> Hello list,
>
> I'm trying to migrate from CentOS 7 to AlmaLinux 9.3. I'm using the
> steps from:
>
> http://qtp.qmailtoaster.com/#rhel9
>
> and
>
> http://www.qmailtoaster.com/migrate.html
>
> In this process I've changed the database passwords in the files:
>
> /home/vpopmail/etc/vpopmail.mysql
> /etc/roundcubemail/config.inc.php
> /etc/dovecot/dovecot-sql.conf.ext
> /etc/dspam.conf
>
> After starting the mailserver and logging in with roundcube the logs
> from dovecot says:
>
> Jan 28 17:29:53 master: Info: Dovecot v2.3.16 (7e2e900c1a) starting up
> for imap, pop3 (core dumps disabled)
> Jan 28 17:30:15 auth: Fatal: Unknown passdb driver 'vpopmail'
> Jan 28 17:30:15 master: Error: service(auth): command startup failed,
> throttling for 2.000 secs
>
> Does anyone knows what I've missed?
>
> Thanks for the help.
>
> Peter Peterse
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

Re: [qmailtoaster] imapd curier resources

[Remo Mattei]

Hi I am sure it works Eric my qmail7 was tweaked to the bone so something broke 
it.

Remo

--
Sent from iPhone

> On martedì, gen 23, 2024 at 02:36, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
>
> I just installed QMT/Rocky9 with no problems using install script. Restored 
> MySQL database dump from CentOS7 production server, tested passwords on 
> Rocky9...No issues at all.
>
>
> On 1/22/2024 12:00 PM, Remo Mattei wrote:
> > Hi all,
> > I will have to retest it but the script failed on me and I had to do manual 
> > steps, I also saw missing certs steps and my config were setup with some 
> > additional parameters, and the server was suing vpopmail driver the new one 
> > is using sql so importing the sql was failing in fact it broke and I 
> > rebuilt a new Qamil Rocky 9 server which then I did manual sync to get all 
> > working correctly. I also recreated the users with a for loop and set the 
> > password with that as the original steps did not work for me. Once that did 
> > go, then I rsync all mail to the new server then the certs and also the 
> > qmail certs to make it simple for customers to avoid reconfiguration.
> >
> > My 2 cents.
> > Remo
> >
> > > On Jan 22, 2024, at 17:18, Eric C Broch  
> > > (mailto:ebr...@whitehorsetc.com) wrote:
> > > It's an old server, right?
> > >
> > > https://qmailtoaster-list.qmailtoaster.narkive.com/OXdOAq3l/courier-imap-access-very-slow
> > >
> > > You could probably find a dozen such discussions, but it's most likely 
> > > obvious what must happen, upgrade.
> > >
> > > Get BlueMail for Android (https://bluemail.me/)
> > > On Jan. 22, 2024, at 1:18 a.m., Giuseppe Perna  > > (mailto:gpe...@srlsigea.eu)> wrote:
> > > > Good morning everyone,
> > > > my qmailtoaster server has 7GB of ram available, but only uses 2GB.
> > > > I've noticed that when imapd processes started by vpopmail increase, 
> > > > the server slows down.
> > > > see attached image.
> > > > How do I configure imapd to use more available memory?
> > > > In general what should I configure to speed up the system? I have many 
> > > > resources at my disposal.
> > > >
> > > > Thank you
> > > >
> > > >
> > > > #rpm -qa qmail*
> > > > qmail-pop3d-toaster-1.03-1.3.22
> > > > qmailtoaster-plus.repo-0.2-2
> > > > qmailmrtg-toaster-4.2-1.3.7
> > > > qmailtoaster-plus-0.3.2-1.4.19
> > > > qmail-toaster-1.03-1.3.22
> > > > qmailadmin-toaster-1.2.16-1.4.0
> > > >
> > > > [root@posta ~]# rpm -qa *toaster*
> > > > ucspi-tcp-toaster-0.88-1.3.9
> > > > maildrop-toaster-2.0.3-1.3.8
> > > > control-panel-toaster-0.5-1.4.0
> > > > libdomainkeys-toaster-0.68-1.3.6
> > > > qmail-pop3d-toaster-1.03-1.3.22
> > > > squirrelmail-toaster-1.4.20-1.3.17
> > > > qmailtoaster-plus.repo-0.2-2
> > > > vpopmail-toaster-5.4.33-1.4.0
> > > > daemontools-toaster-0.76-1.3.6
> > > > libsrs2-toaster-1.0.18-1.3.6
> > > > courier-authlib-toaster-0.59.2-1.3.10
> > > > ripmime-toaster-1.4.0.6-1.3.6
> > > > autorespond-toaster-2.0.5-1.4.0
> > > > courier-imap-toaster-4.1.2-1.3.10
> > > > isoqlog-toaster-2.1-1.3.7
> > > > maildrop-toaster-devel-2.0.3-1.3.8
> > > > qmailmrtg-toaster-4.2-1.3.7
> > > > send-emails-toaster-0.5-1.4.0
> > > > spamassassin-toaster-3.3.2-1.4.3
> > > > vqadmin-toaster-2.3.7-1.4.1
> > > > qmailtoaster-plus-0.3.2-1.4.19
> > > > ezmlm-toaster-0.53.324-1.3.6
> > > > qmail-toaster-1.03-1.3.22
> > > > ezmlm-cgi-toaster-0.53.324-1.3.6
> > > > qmailadmin-toaster-1.2.16-1.4.0
> > > > simscan-toaster-1.4.0-1.4.0
> > > > clamav-toaster-0.97.6-1.4.2
> > > >
> > > > Please help me.
> > > >
> > > > thanks

Re: [qmailtoaster] imapd curier resources

[Remo Mattei]

Hi all, 
I will have to retest it but the script failed on me and I had to do manual 
steps, I also saw missing certs steps and my config were setup with some 
additional parameters, and the server was suing vpopmail driver the new one is 
using sql so importing the sql was failing in fact it broke and I rebuilt a new 
Qamil Rocky 9 server which then I did manual sync to get all working correctly. 
I also recreated the users with a for loop and set the password with that as 
the original steps did not work for me. Once that did go, then I rsync all mail 
to the new server then the certs and also the qmail certs to make it simple for 
customers to avoid reconfiguration. 

My 2 cents. 
Remo 

> On Jan 22, 2024, at 17:18, Eric C Broch  wrote:
> 
> It's an old server, right?
> 
> https://qmailtoaster-list.qmailtoaster.narkive.com/OXdOAq3l/courier-imap-access-very-slow
> 
> You could probably find a dozen such discussions, but it's most likely 
> obvious what must happen, upgrade.
> 
> Get BlueMail for Android 
> On Jan. 22, 2024, at 1:18 a.m., Giuseppe Perna  > wrote:
>> 
>> Good morning everyone,
>> my qmailtoaster server has 7GB of ram available, but only uses 2GB.
>> I've noticed that when imapd processes started by vpopmail increase, the 
>> server slows down.
>> see attached image.
>> How do I configure imapd to use more available memory?
>> In general what should I configure to speed up the system? I have many 
>> resources at my disposal.
>> 
>> Thank you
>> 
>> 
>> #rpm -qa qmail*
>> qmail-pop3d-toaster-1.03-1.3.22
>> qmailtoaster-plus.repo-0.2-2
>> qmailmrtg-toaster-4.2-1.3.7
>> qmailtoaster-plus-0.3.2-1.4.19
>> qmail-toaster-1.03-1.3.22
>> qmailadmin-toaster-1.2.16-1.4.0
>> 
>> [root@posta ~]# rpm -qa *toaster*
>> ucspi-tcp-toaster-0.88-1.3.9
>> maildrop-toaster-2.0.3-1.3.8
>> control-panel-toaster-0.5-1.4.0
>> libdomainkeys-toaster-0.68-1.3.6
>> qmail-pop3d-toaster-1.03-1.3.22
>> squirrelmail-toaster-1.4.20-1.3.17
>> qmailtoaster-plus.repo-0.2-2
>> vpopmail-toaster-5.4.33-1.4.0
>> daemontools-toaster-0.76-1.3.6
>> libsrs2-toaster-1.0.18-1.3.6
>> courier-authlib-toaster-0.59.2-1.3.10
>> ripmime-toaster-1.4.0.6-1.3.6
>> autorespond-toaster-2.0.5-1.4.0
>> courier-imap-toaster-4.1.2-1.3.10
>> isoqlog-toaster-2.1-1.3.7
>> maildrop-toaster-devel-2.0.3-1.3.8
>> qmailmrtg-toaster-4.2-1.3.7
>> send-emails-toaster-0.5-1.4.0
>> spamassassin-toaster-3.3.2-1.4.3
>> vqadmin-toaster-2.3.7-1.4.1
>> qmailtoaster-plus-0.3.2-1.4.19
>> ezmlm-toaster-0.53.324-1.3.6
>> qmail-toaster-1.03-1.3.22
>> ezmlm-cgi-toaster-0.53.324-1.3.6
>> qmailadmin-toaster-1.2.16-1.4.0
>> simscan-toaster-1.4.0-1.4.0
>> clamav-toaster-0.97.6-1.4.2
>> 
>> Please help me.
>> 
>> thanks

Re: [qmailtoaster] Hello migration from centos 7 to rocky 9

[Remo Mattei]

I was looking at that and I think the certs are missing. I want to replace the 
old box with the new box but same DNS, IP, DKIM etc.. I will take care of that 
but just want to share this since other may do the same thing. 

Remo 

> On Jan 13, 2024, at 11:50, Remo Mattei  wrote:
> 
> 
> Thanks
> 
> --
> Sent from iPhone 
> 
> On sabato, gen 13, 2024 at 11:22, Eric Broch  <mailto:ebr...@whitehorsetc.com>> wrote:
> I'd do this 
> 
> http://www.qmailtoaster.com/migrate.html 
> 
> On 1/13/2024 12:19 PM, Remo Mattei wrote:
>> Hello guys any suggestions on this migration? I have done several in the 
>> past but maybe there is a new way now. 
>> 
>> 
>> Thanks, 
>> Remo 
>> - 
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>> 
> 
> - 
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
> 

Re: [qmailtoaster] Hello migration from centos 7 to rocky 9

[Remo Mattei]

Thanks

--
Sent from iPhone

> On sabato, gen 13, 2024 at 11:22, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> I'd do this
>
> http://www.qmailtoaster.com/migrate.html
>
> On 1/13/2024 12:19 PM, Remo Mattei wrote:
> > Hello guys any suggestions on this migration? I have done several in the 
> > past but maybe there is a new way now.
> >
> >
> > Thanks,
> > Remo
> > -
> > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> >
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

[qmailtoaster] Hello migration from centos 7 to rocky 9

[Remo Mattei]

Hello guys any suggestions on this migration? I have done several in the past 
but maybe there is a new way now. 


Thanks, 
Remo 
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] [spamA] Re: [qmailtoaster] qmHandle on Rocky 9

[Remo Mattei]

Thanks

--
Sent from iPhone

> On venerdì, nov 24, 2023 at 14:49, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> Where did you get the version of qmHandle you are running?
>
> Try this version: https://qtp.qmailtoaster.org/bin/qmHandle
>
> Look at the lines
>
> # For instance, this is if you have DJB's daemontools
> #my ($stopqmail) = '/usr/local/bin/svc -d /service/qmail-send';
> #my ($startqmail) = '/usr/local/bin/svc -u /service/qmail-send';
>
> # While this is if you have a Debian GNU/Linux with its qmail package
> my ($stopqmail) = '/etc/init.d/qmail stop';
> my ($startqmail) = '/etc/init.d/qmail start';
>
>
> On 11/21/2023 6:04 PM, Remo Mattei wrote:
> > Hello has anyone seen this issue?
> >
> > > qmHandle -D
> > Calling system script to terminate qmail...
> > Can't exec "/usr/local/bin/svc": No such file or directory at
> > /var/qmail/bin//qmHandle line 192 (#1)
> > (W exec) A system(), exec(), or piped open call could not execute the
> > named program for the indicated reason. Typical reasons include: the
> > permissions were wrong on the file, the file wasn't found in
> > $ENV{PATH}, the executable in question was compiled for another
> > architecture, or the #! line in a script points to an interpreter that
> > can't be run for similar reasons. (Or maybe your system doesn't support
> > #! at all.)
> >
> >
> > Thanks
> >
> > -
> > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> >
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

[qmailtoaster] qmHandle on Rocky 9

[Remo Mattei]

Hello has anyone seen this issue?

> qmHandle -D
Calling system script to terminate qmail...
Can't exec "/usr/local/bin/svc": No such file or directory at
/var/qmail/bin//qmHandle line 192 (#1)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason.  Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons.  (Or maybe your system doesn't support
#! at all.)


Thanks 

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Renaming an email address

[Remo Mattei]

Well you can create a new user and cp -R the mails into the new user :) done. 

Remove the old user. 

Remo 

> On Oct 27, 2023, at 09:20, Jaime Lerner  wrote:
> 
> I don’t know if this is a silly question or not, but I have never done it.
>  
> Is it possible to rename an email account and still retain all the messages 
> in it?
>  
> For example, you have j...@example.com  and you want 
> to rename it to jos...@example.com  but retain all 
> the messages associated with the joe email address. I know I can rename a 
> user via command line, but I’m guessing it won’t update everything for 
> qmail/dovecot etc.
>  
> Thanks!

[qmailtoaster] [spamA] Re: [qmailtoaster] rocky 9 and mariadb

[Remo Mattei]

I am running two qmail boxes with rocky 9 all good.

--
Sent from iPhone

> On sabato, ago 19, 2023 at 15:24, Qmail  (mailto:qm...@mailonly.dk)> wrote:
> Hi .
> You need to stick to Mysql.
>
> Latest Mariadb has changed and is not backwards compliant with mysql
> any more - so it is not straight ahead using latest mariadb and may
> require some changes in the qmail line of software.
> (wrote about it back in March).
>
> (I'm running mariadb on my Rocky8 instance -it's the 10.3.35-MariaDB
> MariaDB Server version - it's the last version compliant with Qmail
> software.
>
> Use the latest mysql and You'll be fine on Rocky9.
>
> Cheers,
> Finn
>
>
> Den 19-08-2023 kl. 23:57 skrev Erald De hoog:
> > It seems installation of the toaster won Rocky 9 with mariah does not work.
> > Vpopmail does not install due to no mysql. Since most things move to 
> > mariadb I would like to install it with mariah. Is there a way to change 
> > the script so it will install or do I have to use mysql?
> > I know on rhel7 it works .
> > -
> > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> >
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

Re: [qmailtoaster] spamhaus issue

[Remo Mattei]

Yes Eric

I have customers on the new server and I would like to use spamhaus but why is 
it behaving this way when my servers and ips are not listed. If it blocks oh 
well I will not use it just trying to figure out. For that aspect of I sent an 
email to a university and I got the same message back so it’s a loop I want to 
close and get it fixed.

Thanks

--
Remo

> On giovedì, mag 11, 2023 at 20:47, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> So, you are sending email from your qmail host, to who?, and they (the remote 
> host) are reporting that your email is rejected by spamhaus...right?
>
> What does this have to do with your enabling spamhaus? Am I missing something?
> On May 11, 2023, at 9:32 PM, Remo Mattei  (mailto:r...@mattei.org)> wrote:
> > They are on the same network behind the firewall so no need to route out.
> >
> > Any suggestions are welcome so I can see how to get that fixed.
> >
> >
> > --
> > Remo
> >
> > > On giovedì, mag 11, 2023 at 20:19, Eric Broch < ebr...@whitehorsetc.com 
> > > (mailto:ebr...@whitehorsetc.com)> wrote:
> > >
> > > Is it sitting behind a firewall?
> > >
> > >
> > > On 5/11/2023 3:07 PM, Remo Mattei wrote:
> > > > no the new box I just built with Rocky linux a new qmail box out of the 
> > > > default gives me that error.
> > > >
> > > > —
> > > > Ciao,
> > > > Remo
> > > >
> > > >
> > > > > On Thursday, May 11, 2023 at 11:46, Jaime Lerner < 
> > > > > jaimeler...@geekgoddess.com (mailto:jaimeler...@geekgoddess.com)> 
> > > > > wrote:
> > > > >
> > > > > Sorry, I thought you had asked to be delisted and you were still 
> > > > > getting that response. I assume you went here to look: 
> > > > > https://check.spamhaus.org/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > I didn’t see your IP listed there, either. The receiving server must 
> > > > > have something set up incorrectly?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > From: Remo Mattei  (mailto:r...@mattei.org)
> > > > > Reply-To:  
> > > > > (mailto:qmailtoaster-list@qmailtoaster.com)
> > > > > Date: Thursday, May 11, 2023 at 2:11 PM
> > > > > To:  
> > > > > (mailto:qmailtoaster-list@qmailtoaster.com)
> > > > > Subject: Re: [qmailtoaster] spamhaus issue
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Well but in every search I do not find my ip or name listed so hard 
> > > > > to find out how to get delisted.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Sent from iPhone
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >

Re: [qmailtoaster] spamhaus issue

[Remo Mattei]

They are on the same network behind the firewall so no need to route out.

Any suggestions are welcome so I can see how to get that fixed.

--
Remo

> On giovedì, mag 11, 2023 at 20:19, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
>
> Is it sitting behind a firewall?
>
>
> On 5/11/2023 3:07 PM, Remo Mattei wrote:
> > no the new box I just built with Rocky linux a new qmail box out of the 
> > default gives me that error.
> >
> > —
> > Ciao,
> > Remo
> >
> >
> > > On Thursday, May 11, 2023 at 11:46, Jaime Lerner 
> > > mailto:jaimeler...@geekgoddess.com)> wrote:
> > >
> > > Sorry, I thought you had asked to be delisted and you were still getting 
> > > that response. I assume you went here to look: https://check.spamhaus.org/
> > >
> > >
> > >
> > >
> > >
> > > I didn’t see your IP listed there, either. The receiving server must have 
> > > something set up incorrectly?
> > >
> > >
> > >
> > >
> > >
> > > From: Remo Mattei  (mailto:r...@mattei.org)
> > > Reply-To:  
> > > (mailto:qmailtoaster-list@qmailtoaster.com)
> > > Date: Thursday, May 11, 2023 at 2:11 PM
> > > To:  
> > > (mailto:qmailtoaster-list@qmailtoaster.com)
> > > Subject: Re: [qmailtoaster] spamhaus issue
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Well but in every search I do not find my ip or name listed so hard to 
> > > find out how to get delisted.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > --
> > > Sent from iPhone
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > >
> > > > On giovedì, mag 11, 2023 at 10:42, Jaime Lerner 
> > > > mailto:jaimeler...@geekgoddess.com)> 
> > > > wrote:
> > > >
> > > >
> > > >
> > > > If you ask to be delisted it will show up right away in Spamhaus.org, 
> > > > but can take a while to be updated with whomever you are trying to send 
> > > > to.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > I was recently listed (as part of a netblock) which effectively blocked 
> > > > me from ALL Google IPs (yikes!) and requested to be delisted. For 
> > > > Google to allow emails again, it only took a few hours after delisting, 
> > > > but I had read it can take up to 2 days for it to be updated in 
> > > > wherever is blocking you.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > From: Remo Mattei  (mailto:r...@mattei.org)
> > > > Reply-To:  
> > > > (mailto:qmailtoaster-list@qmailtoaster.com)
> > > > Date: Thursday, May 11, 2023 at 12:32 AM
> > > > To: qmailtoaster-list  
> > > > (mailto:qmailtoaster-list@qmailtoaster.com)
> > > > Subject: [qmailtoaster] spamhaus issue
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Error! Filename not specified.
> > > >
> > > >
> > > > Hello guys, I checked their website and my server is not listed, 
> > > > niether my IP but if I enable zen.spamhaus.org 
> > > > (http://zen.spamhaus.org/) I get the following message
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Hi. This is the qmail-send program at smtp 
> > > > (http://smtp.mattei.org/).mail.me (http://mail.me/).
> > > > I'm afraid I wasn't able to deliver your message to the following 
> > > > addresses.
> > > > This is a permanent error; I've given up. Sorry it didn't work out.
> > > >
> > > > mailto:i...@mail9.italy1.com)me.com (http://me.com/)>:
> > > > 221.xxx does not like recipient.
> > > > Remote host said: 554 Refused. Your IP address is listed in the RBL at 
> > > > zen.spamhaus.org (http://zen.spamhaus.org/)
> > > > Giving up on myipaddress.
> > > >
> > > > --- Below this line is a copy of the message.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > —
> > > > Ciao,
> > > >
> > > >
> > > > Remo
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
>
>
>

Re: [qmailtoaster] spamhaus issue

[Remo Mattei]

no the new box I just built with Rocky linux a new qmail box out of the default 
gives me that error.

—
Ciao,
Remo

> On Thursday, May 11, 2023 at 11:46, Jaime Lerner  (mailto:jaimeler...@geekgoddess.com)> wrote:
>
> Sorry, I thought you had asked to be delisted and you were still getting that 
> response. I assume you went here to look: https://check.spamhaus.org/
>
>
>
>
>
> I didn’t see your IP listed there, either. The receiving server must have 
> something set up incorrectly?
>
>
>
>
>
> From: Remo Mattei 
> Reply-To: 
> Date: Thursday, May 11, 2023 at 2:11 PM
> To: 
> Subject: Re: [qmailtoaster] spamhaus issue
>
>
>
>
>
>
>
>
>
>
> Well but in every search I do not find my ip or name listed so hard to find 
> out how to get delisted.
>
>
>
>
>
>
>
>
> --
> Sent from iPhone
>
>
>
>
>
>
>
>
> >
> > On giovedì, mag 11, 2023 at 10:42, Jaime Lerner 
> > mailto:jaimeler...@geekgoddess.com)> wrote:
> >
> >
> >
> > If you ask to be delisted it will show up right away in Spamhaus.org, but 
> > can take a while to be updated with whomever you are trying to send to.
> >
> >
> >
> >
> >
> > I was recently listed (as part of a netblock) which effectively blocked me 
> > from ALL Google IPs (yikes!) and requested to be delisted. For Google to 
> > allow emails again, it only took a few hours after delisting, but I had 
> > read it can take up to 2 days for it to be updated in wherever is blocking 
> > you.
> >
> >
> >
> >
> >
> > From: Remo Mattei 
> > Reply-To: 
> > Date: Thursday, May 11, 2023 at 12:32 AM
> > To: qmailtoaster-list 
> > Subject: [qmailtoaster] spamhaus issue
> >
> >
> >
> >
> >
> >
> >
> > Error! Filename not specified.
> >
> >
> > Hello guys, I checked their website and my server is not listed, niether my 
> > IP but if I enable zen.spamhaus.org (http://zen.spamhaus.org/) I get the 
> > following message
> >
> >
> >
> >
> >
> >
> >
> > Hi. This is the qmail-send program at smtp 
> > (http://smtp.mattei.org/).mail.me (http://mail.me/).
> > I'm afraid I wasn't able to deliver your message to the following addresses.
> > This is a permanent error; I've given up. Sorry it didn't work out.
> >
> > mailto:i...@mail9.italy1.com)me.com (http://me.com/)>:
> > 221.xxx does not like recipient.
> > Remote host said: 554 Refused. Your IP address is listed in the RBL at 
> > zen.spamhaus.org (http://zen.spamhaus.org/)
> > Giving up on myipaddress.
> >
> > --- Below this line is a copy of the message.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > —
> > Ciao,
> >
> >
> > Remo
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>



signature.asc
Description: PGP signature

Re: [qmailtoaster] spamhaus issue

[Remo Mattei]

Well but in every search I do not find my ip or name listed so hard to find out 
how to get delisted.

--
Sent from iPhone

> On giovedì, mag 11, 2023 at 10:42, Jaime Lerner  (mailto:jaimeler...@geekgoddess.com)> wrote:
>
> If you ask to be delisted it will show up right away in Spamhaus.org, but can 
> take a while to be updated with whomever you are trying to send to.
>
>
>
>
>
> I was recently listed (as part of a netblock) which effectively blocked me 
> from ALL Google IPs (yikes!) and requested to be delisted. For Google to 
> allow emails again, it only took a few hours after delisting, but I had read 
> it can take up to 2 days for it to be updated in wherever is blocking you.
>
>
>
>
>
> From: Remo Mattei 
> Reply-To: 
> Date: Thursday, May 11, 2023 at 12:32 AM
> To: qmailtoaster-list 
> Subject: [qmailtoaster] spamhaus issue
>
>
>
>
>
>
>
>
>
>
> Hello guys, I checked their website and my server is not listed, niether my 
> IP but if I enable zen.spamhaus.org (http://zen.spamhaus.org/) I get the 
> following message
>
>
>
>
>
>
>
> Hi. This is the qmail-send program at smtp (http://smtp.mattei.org/).mail.me 
> (http://mail.me/).
> I'm afraid I wasn't able to deliver your message to the following addresses.
> This is a permanent error; I've given up. Sorry it didn't work out.
>
> mailto:i...@mail9.italy1.com)me.com (http://me.com/)>:
> 221.xxx does not like recipient.
> Remote host said: 554 Refused. Your IP address is listed in the RBL at 
> zen.spamhaus.org (http://zen.spamhaus.org/)
> Giving up on myipaddress.
>
> --- Below this line is a copy of the message.
>
>
>
>
>
>
>
>
>
>
>
>
> —
> Ciao,
>
>
> Remo
>
>
>
>
>
>
>
>
>
>

[qmailtoaster] spamhaus issue

[Remo Mattei]

Hello guys, I checked their website and my server is not listed, niether my IP 
but if I enable zen.spamhaus.org (http://zen.spamhaus.org/) I get the following 
message

Hi. This is the qmail-send program at smtp (http://smtp.mattei.org/).mail.me 
(http://mail.me/).
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

mailto:i...@mail9.italy1.com)me.com (http://me.com/)>:
221.xxx does not like recipient.
Remote host said: 554 Refused. Your IP address is listed in the RBL at 
zen.spamhaus.org (http://zen.spamhaus.org/)
Giving up on myipaddress.

--- Below this line is a copy of the message.

—
Ciao,
Remo



signature.asc
Description: PGP signature

Re: [qmailtoaster] Cert Error

[Remo Mattei]

What does yum repolist give you?

--
Mandato da iPhone

> On domenica, feb 26, 2023 at 18:57, Gary Bowling  (mailto:g...@gbco.us)> wrote:
>
>
>
>
>
> Tried to do a yum update on my mail server this evening. Got the following.
>
>
>
>
>
>
>
> Could not retrieve mirrorlist 
> https://www.qmailtoaster.org/qmt-mirrorlist-current error was
> 14: curl#60 - "Peer's Certificate has expired."
>
>
>
>
>
>
>
> Thanks, Gary
>
>
> --
> 
> Gary Bowling
> The Moderns on Spotify (https://distrokid.com/hyperfollow/themoderns/bbrs)
> 
> - To 
> unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For 
> additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] do we support php 8 ?

[Remo Mattei]

I have roundcube working just fine. I do not use squirrelmail.

Remo

--
Mandato da iPhone

> On giovedì, gen 19, 2023 at 20:38, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> It seems squirrelmail and roundcubemail don't work with pho 8
> On Jan 17, 2023, at 2:02 PM, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> >
> > I just upgraded from 7.4 to 8.0 on a test springdale 8 linux machine
> >
> > # dnf module reset php
> > # dnf module install php:remi-8.0
> > # dnf update
> >
> > All the toaster webpages* seem to work (Added user in qmailadmin).
> >
> >
> > *qmailadmin
> > vqadmin
> > isoqlog
> > mrtq
> >
> >
> >
> >
> > On 1/16/2023 10:09 PM, Remo wrote:
> > > Hello I just notice that php 7.4 is going out do we support php 8?
> > >
> > > Thanks
> > >
> > > —
> > > Ciao,
> > > Remo
> > >
> > >

Re: [qmailtoaster] TLS issue with Spamdyke v5.0.1

[Remo Mattei]

Hi I had something similar but my qmail pem was empty and that created a few 
issues once fixed that all good.

--
Mandato da iPhone

> On domenica, dic 25, 2022 at 21:45, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> Do you have openssl-* installed?
> On Dec 25, 2022, at 9:57 PM, nowuk...@gmail.com (mailto:nowuk...@gmail.com) 
> wrote:
> > Hi,
> >
> > It seems like suddenly my QMT installation started acting up and reject
> > mail (several days now). It does not deliver bounces but reports that
> > the sending server, e.g., Yahoo, etc, could not connect to send mail.
> > There is no MTA code in returned mail, at all. Initially, Gmail was
> > having an issue, as well, but now seems to be able to send mail.
> >
> > I am convinced it was due to some package upgrade, but I am at my wits
> > end to figure out how to fix this. Any hints would be appreciated. The
> > certificate file is Let's Encrypt certificate I have used for some time
> > now and key packaged into PEM file.
> >
> > Current package versions are (some upgraded recently, as I was trying to
> > fix it with no success):
> >
> > autorespond-2.0.5-1.qt.el7.x86_64
> > control-panel-0.5.1-1.qt.el7.x86_64
> > daemontools-0.76-0.qt.el7.x86_64
> > dovecot-2.3.11.3 (http://2.3.11.3)-13.qt.el7.x86_64
> > dspam-3.10.2-15.qt.el7.x86_64
> > dspam-client-3.10.2-15.qt.el7.x86_64
> > dspam-hash-3.10.2-15.qt.el7.x86_64
> > dspam-libs-3.10.2-15.qt.el7.x86_64
> > dspam-mysql-3.10.2-15.qt.el7.x86_64
> > ezmlm-0.53.324-0.qt.el7.x86_64
> > ezmlm-cgi-0.53.324-0.qt.el7.x86_64
> > isoqlog-2.2.1-2.qt.el7.x86_64
> > libdomainkeys-devel-0.69-1.qt.el7.x86_64
> > libsrs2-1.0.18-0.qt.el7.x86_64
> > libsrs2-devel-1.0.18-0.qt.el7.x86_64
> > maildrop-2.9.1-2.qt.el7.x86_64
> > maildrop-devel-2.9.1-2.qt.el7.x86_64
> > mailman-debuginfo-2.1.12-20.qt.el7.x86_64
> > openssl11-1.1.1k-6.qt.el7.x86_64
> > openssl11-libs-1.1.1k-6.qt.el7.x86_64
> > qmail-1.03-2.2.1.qt.el7.x86_64
> > qmailadmin-1.2.16-3.2.qt.el7.x86_64
> > qmailmrtg-4.2-3.qt.el7.x86_64
> > qmt-plus-1-0.qt.el7.noarch
> > qmt-release-1-7.qt.el7.noarch
> > spamdyke-5.0.1-3.qt.el7.x86_64
> > ucspi-tcp-0.88-0.qt.el7.x86_64
> > vpopmail-5.4.33-2.qt.el7.x86_64
> > vqadmin-2.3.7-1.qt.el7.x86_64
> >
> > Thanks,
> >
> > Ed
> >
> >
> > P.S. In the Spamdyke logs, I see that the TLS connection has been
> > established but it times out:
> >
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_ip_in_rdns_cc()@filter.c:978): checking for IP in rDNS
> > +country code; rdns: mta5.ealerts.bankofamerica.com 
> > (http://mta5.ealerts.bankofamerica.com)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_rdns_whitelist_file()@filter.c:1055): searching rDNS
> > whitelist file(s); rdns: mta5.ealerts.bankofamerica.com 
> > (http://mta5.ealerts.bankofamerica.com)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_rdns_blacklist_file()@filter.c:1159): searching rDNS
> > blacklist file(s); rdns: mta5.ealerts.bankofamerica.com 
> > (http://mta5.ealerts.bankofamerica.com)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_ip_whitelist()@filter.c:1228): searching IP whitelist
> > file(s); ip: 68.232.194.2 (http://68.232.194.2)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_ip_blacklist()@filter.c:1279): searching IP blacklist
> > file(s); ip: 68.232.194.2 (http://68.232.194.2)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_ip_in_rdns_whitelist()@filter.c:1380): checking for IP in
> > rDNS +keyword(s) in whitelist file; ip: 68.232.194.2 (http://68.232.194.2) 
> > rdns:
> > mta5.ealerts.bankofamerica.com (http://mta5.ealerts.bankofamerica.com)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_ip_in_rdns_blacklist()@filter.c:1333): checking for IP in
> > rDNS +keyword(s) in blacklist file; ip: 68.232.194.2 (http://68.232.194.2) 
> > rdns:
> > mta5.ealerts.bankofamerica.com (http://mta5.ealerts.bankofamerica.com)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_rdns_resolve()@filter.c:1426): checking rDNS resolution;
> > rdns: mta5.ealerts.bankofamerica.com (http://mta5.ealerts.bankofamerica.com)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_dns_rbl()@filter.c:1645): checking DNS RBL(s); ip: 
> > 68.232.194.2 (http://68.232.194.2)
> > Dec 25 18:32:27 mx2 spamdyke[17819]:
> > DEBUG(filter_earlytalker()@filter.c:1817): checking for earlytalker;
> > delay: 2
> > Dec 25 18:32:30 mx2 spamdyke[17819]: DEBUG(tls_start()@tls.c:439):
> > TLS/SSL connection established, using cipher AES256-GCM-SHA384, 256 bits
> > Dec 25 18:32:31 mx2 spamdyke[17819]:
> > DEBUG(find_username()@spamdyke.c:127): searching for username between
> > positions 11 and 93: MAIL
> > FROM:
> > BODY=8BITMIME
> > Dec 25 18:32:31 mx2 spamdyke[17819]:
> > DEBUG(find_domain()@spamdyke.c:361): searching for domain between
> > positions 61 and 93: MAIL
> > FROM:
> > BODY=8BITMIME
> > Dec 25 18:32:31 mx2 spamdyke[17819]:
> > DEBUG(find_address()@spamdyke.c:726): found username:
> > 

Re: [qmailtoaster] Craigslist error

[Remo Mattei]

Hi Eric,
I have DNS, PTR and static IP, I am trying to figure it out what is missing.

—
Ciao,
Remo

> On Sunday, Dec 11, 2022 at 21:25, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
>
> Did go to the link?
>
> What to do if your email is rejected by craigslist email servers
> Is your email is being rejected by our servers with a message like this?
> 554 5.7.1 : Client host rejected: 
> please_use_SMTP_relay_of_your_isp,_or_setup_non-generic_dns.
>
> In an effort to curb abuse of our email servers and limit the amount of spam 
> inflicted upon our users, craigslist does not accept email from computers 
> with dynamically assigned IP addresses, or hosts that have generic DNS setup.
>
>
>
> If you get the above message, here's what to do:
>
> The easiest solution is to use the mail server of your ISP to relay your 
> email, as they almost certainly have their DNS setup properly in the way we 
> would like. If you're not sure how to setup your mail client to do this, 
> please contact your ISP.
>
> For tech folks that want to run their own mail server:
>
> If you have a static IP address and want to be able to send email through 
> your own mail server, you will need to contact your ISP and have them setup 
> non-generic DNS for your IP address. Usually this is done via a PTR record. 
> Note that you'll need a matching A record. Again, the easiest solution for 
> most end users is to route their outbound email through the mail server of 
> their ISP.
>
>
> If these suggestions don't work, some people find it easiest to use one of 
> the many free web based email systems.
>
> What is generic DNS?
>
> When you make a connection to our servers, we use your IP address to perform 
> a reverse lookup to find the name listed for your computer in the domain name 
> service. We consider you to have generic DNS if the hostname returned 
> contains:
>
> An IP address
> The words pool, dhcp, dynamic
> The words dsl, ppp, pub
> The words server or host
> The words dial or dialup
> The words cable or modem
> The words host, client, node, cust, customer
> Any other indicators that the hostname is not specific to you or your 
> organization
>
> Still not working?
>
> If you have a static IP address, run a mail server and do not have generic 
> DNS, and are continuing to run into trouble, please send email to 
> postmas...@craigslist.org (mailto:postmas...@craigslist.org). Be sure to 
> include the complete headers and rejection message, so that we're able to 
> determine exactly what is happening.
>
> On 12/11/2022 8:05 PM, Remo Mattei wrote:
> > Hello guys,
> > I get this error from Craigslist which I have not seen before, any 
> > suggestions?
> >
> > Thanks,
> >
> > Remo
> >
> > Connected to 208.82.238.85 but greeting failed.
> > Remote host said: 554 [9A5CB1FE-E09B-4C64-88D6-6D987569FF18@mxi6f] 
> > 208-53-44-243.italy1.com [208.53.44.243] Please use smtp relay of your ISP 
> > or setup non-generic DNS. See: 
> > http://www.craigslist.org/about/help/generic_DNS
> >
> > —
> > Ciao,
> > Remo
> >
> >


signature.asc
Description: PGP signature

Re: [qmailtoaster] Craigslist error

[Remo Mattei]

OK I got it working, for others to know, I just used a diff DNS server and 
message did not bounce.

—
Ciao,
Remo

> On Sunday, Dec 11, 2022 at 21:49, Remo Mattei  (mailto:r...@mattei.org)> wrote:
> Hi Eric,
> I have DNS, PTR and static IP, I am trying to figure it out what is missing.
>
> —
> Ciao,
> Remo
>
>
> > On Sunday, Dec 11, 2022 at 21:25, Eric Broch  > (mailto:ebr...@whitehorsetc.com)> wrote:
> >
> > Did go to the link?
> >
> > What to do if your email is rejected by craigslist email servers
> > Is your email is being rejected by our servers with a message like this?
> > 554 5.7.1 : Client host rejected: 
> > please_use_SMTP_relay_of_your_isp,_or_setup_non-generic_dns.
> >
> > In an effort to curb abuse of our email servers and limit the amount of 
> > spam inflicted upon our users, craigslist does not accept email from 
> > computers with dynamically assigned IP addresses, or hosts that have 
> > generic DNS setup.
> >
> >
> >
> > If you get the above message, here's what to do:
> >
> > The easiest solution is to use the mail server of your ISP to relay your 
> > email, as they almost certainly have their DNS setup properly in the way we 
> > would like. If you're not sure how to setup your mail client to do this, 
> > please contact your ISP.
> >
> > For tech folks that want to run their own mail server:
> >
> > If you have a static IP address and want to be able to send email through 
> > your own mail server, you will need to contact your ISP and have them setup 
> > non-generic DNS for your IP address. Usually this is done via a PTR record. 
> > Note that you'll need a matching A record. Again, the easiest solution for 
> > most end users is to route their outbound email through the mail server of 
> > their ISP.
> >
> >
> > If these suggestions don't work, some people find it easiest to use one of 
> > the many free web based email systems.
> >
> > What is generic DNS?
> >
> > When you make a connection to our servers, we use your IP address to 
> > perform a reverse lookup to find the name listed for your computer in the 
> > domain name service. We consider you to have generic DNS if the hostname 
> > returned contains:
> >
> > An IP address
> > The words pool, dhcp, dynamic
> > The words dsl, ppp, pub
> > The words server or host
> > The words dial or dialup
> > The words cable or modem
> > The words host, client, node, cust, customer
> > Any other indicators that the hostname is not specific to you or your 
> > organization
> >
> > Still not working?
> >
> > If you have a static IP address, run a mail server and do not have generic 
> > DNS, and are continuing to run into trouble, please send email to 
> > postmas...@craigslist.org (mailto:postmas...@craigslist.org). Be sure to 
> > include the complete headers and rejection message, so that we're able to 
> > determine exactly what is happening.
> >
> > On 12/11/2022 8:05 PM, Remo Mattei wrote:
> > > Hello guys,
> > > I get this error from Craigslist which I have not seen before, any 
> > > suggestions?
> > >
> > > Thanks,
> > >
> > > Remo
> > >
> > > Connected to 208.82.238.85 but greeting failed.
> > > Remote host said: 554 [9A5CB1FE-E09B-4C64-88D6-6D987569FF18@mxi6f] 
> > > 208-53-44-243.italy1.com [208.53.44.243] Please use smtp relay of your 
> > > ISP or setup non-generic DNS. See: 
> > > http://www.craigslist.org/about/help/generic_DNS
> > >
> > > —
> > > Ciao,
> > > Remo
> > >
> > >


signature.asc
Description: PGP signature

[qmailtoaster] Craigslist error

[Remo Mattei]

Hello guys,
I get this error from Craigslist which I have not seen before, any suggestions?

Thanks,

Remo

Connected to 208.82.238.85 but greeting failed.
Remote host said: 554 [9A5CB1FE-E09B-4C64-88D6-6D987569FF18@mxi6f] 
208-53-44-243.italy1.com [208.53.44.243] Please use smtp relay of your ISP or 
setup non-generic DNS. See: http://www.craigslist.org/about/help/generic_DNS

—
Ciao,
Remo



signature.asc
Description: PGP signature

Re: [qmailtoaster] upgrade qmailtoster old old

[Remo Mattei]

Giuseppe mandami un messaggio privato poi ci sentiamo al tel. Ciao

--
Mandato da iPhone

> On giovedì, nov 10, 2022 at 09:33, Giuseppe Perna  (mailto:gpe...@srlsigea.eu)> wrote:
> Hello everybody,
> I would like to update my version of qmailtoaster with due caution ;-) these 
> are the installed versions:
>
> # cat /etc/redhat-release
> CentOS release 5.8 (Final)
>
> # rpm -qa mysql
> mysql-5.0.95-1.el5_7.1
> # rpm -qa httpd
> httpd-2.2.3-65.el5.centos
>
> # spamdyke -v
> spamdyke 4.3.1+TLS+CONFIGTEST+DEBUG (C)2012 Sam Clippinger, samc (at) silence 
> (dot) org
> http://www.spamdyke.org/
>
>
> # rpm -qa qmail*
> qmail-pop3d-toaster-1.03-1.3.22
> qmailtoaster-plus.repo-0.2-2
> qmailmrtg-toaster-4.2-1.3.7
> qmailtoaster-plus-0.3.2-1.4.19
> qmail-toaster-1.03-1.3.22
> qmailadmin-toaster-1.2.16-1.4.0
> [root@posta ~]# rpm -qa *toaster*
> ucspi-tcp-toaster-0.88-1.3.9
> maildrop-toaster-2.0.3-1.3.8
> control-panel-toaster-0.5-1.4.0
> libdomainkeys-toaster-0.68-1.3.6
> qmail-pop3d-toaster-1.03-1.3.22
> squirrelmail-toaster-1.4.20-1.3.17
> qmailtoaster-plus.repo-0.2-2
> vpopmail-toaster-5.4.33-1.4.0
> daemontools-toaster-0.76-1.3.6
> libsrs2-toaster-1.0.18-1.3.6
> courier-authlib-toaster-0.59.2-1.3.10
> ripmime-toaster-1.4.0.6-1.3.6
> autorespond-toaster-2.0.5-1.4.0
> courier-imap-toaster-4.1.2-1.3.10
> isoqlog-toaster-2.1-1.3.7
> maildrop-toaster-devel-2.0.3-1.3.8
> qmailmrtg-toaster-4.2-1.3.7
> send-emails-toaster-0.5-1.4.0
> spamassassin-toaster-3.3.2-1.4.3
> vqadmin-toaster-2.3.7-1.4.1
> qmailtoaster-plus-0.3.2-1.4.19
> ezmlm-toaster-0.53.324-1.3.6
> qmail-toaster-1.03-1.3.22
> ezmlm-cgi-toaster-0.53.324-1.3.6
> qmailadmin-toaster-1.2.16-1.4.0
> simscan-toaster-1.4.0-1.4.0
> clamav-toaster-0.97.6-1.4.2
>
> Please help me.
>
> thanks
>

Re: [qmailtoaster] Is it safe to block port 465/smtps and how to prevent brute force guessing

[Remo Mattei]

I would change all the passwords.

Remo

--
Mandato da iPhone

> On martedì, nov 01, 2022 at 14:44, Eric Broch  (mailto:ebr...@whitehorsetc.com)> wrote:
> # qmailctl stop
>
> # touch /var/qmail/supervise/smtps/log/down
>
> # touch /var/qmail/supervise/smtps/down
>
> # qmailctl start
>
> # qmailctl stat
>
> But, if they've hacked smtps then they've also hacked submission; right?
>
>
> On 11/1/2022 1:10 PM, Peter Peltonen wrote:
> > Hi,
> >
> > I had an email account password guessed through auth attempts via smtps.
> >
> > I did not realize this as I had forgotten I had it enabled at all. I
> > was looking at the submission log and scratching my head not
> > understanding how messages got to the remote queue without anything in
> > the submission log, until I realized smpts was enabled and it was
> > logging to /var/log/maillog and not to any log under /var/log/qmail...
> >
> > My first question: is it safe to disable smtps, I guess I don't need
> > it for anything as all my users should be using 587/submission instead?
> >
> > Second question: How do I disable it? Should I just
> > remove /var/qmail/supervise/smtps/run file? And/or block it at
> > firewall level?
> >
> > Third question: to prevent brute force attacks, is fail2ban the best
> > option to do it? I just follow the instructions at
> > http://www.qmailtoaster.com/fail2ban.html ?
> >
> > Best,
> > Peter
> >
> >
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>

Re: [qmailtoaster] MRTG setup

[Remo Mattei]

I checked it out on my rocky box and it’s not working. 

Remo 

> On Sep 3, 2022, at 09:47, Eric Broch  wrote:
> 
> I think it should work out of the box.
> 
> On 9/2/2022 5:54 PM, Remo Mattei wrote:
>> Hello guys,
>> Does anyhow have the config for the MRTG for qmailtoaster?
>> 
>> Thanks
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] MRTG setup

[Remo Mattei]

Hello guys, 
Does anyhow have the config for the MRTG for qmailtoaster? 

Thanks

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: **SPAM** Re: [qmailtoaster] qmail toaster support for BDAT

[Remo Mattei]

I just tested my two mail servers with qmt and both work just fine and sent 
email from outlook web. 

So not sure what is your config and which patch you have used. 

Remo 

> On Aug 28, 2022, at 13:25, Jaime Lerner  wrote:
> 
> I read that if you’re running ESMTP, that includes BDAT support. QMT has 
> ESMTP via a patch. I know my server’s banner includes ESMTP during an SMTP 
> handshake ... so wouldn’t that mean QMT has BDAT support?
>  
> From: Jeff Koch  >
> Reply-To:  >
> Date: Sunday, August 28, 2022 at 4:20 PM
> To:  >
> Subject: Re: [qmailtoaster] qmail toaster support for BDAT
>  
> Thanks Tonix - so the result is that messages from email clients (like 
> Outlook) that add multiple bare line feeds in their messages and use O365 
> will now get rejected by the qmail toaster.  How nice of Microsoft. 
> 
> Jeff
> 
> On 8/28/2022 2:27 PM, to...@interazioni.it  
> wrote:
>> This document explains the problem: 
>> https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/non-delivery-reports-in-exchange-online/fix-error-code-550-5-6-11-in-exchange-online
>>  
>> 
>> 
>> I will omit my thought on remote admins. 
>> A very simple rule in communication is: be strict when sending, be tolerant 
>> when receiving.
>> 
>> Regards,
>> Tonino
>> 
>> 
>> Il 28 agosto 2022 19:24:13 CEST, Jeff Koch  
>>  ha scritto:
>> >Further information:
>> >
>> >The sender also got the following message from his exchange mailserver when 
>> >trying to send to our mailserver:
>> >
>> >Your message contains invalid characters (bare line feed characters) which 
>> >the email servers at ..com don't support
>> >
>> >Jeff
>> >
>> >
>> >On 8/28/2022 12:45 PM, Jeff Koch wrote:
>> >> 
>> >> Never heard of this before but an email sender to our mailserver got the 
>> >> following error message:
>> >> 
>> >> 550 5.6.11 SMTPSEND.BareLinefeedsAreIllegal; message contains bare 
>> >> linefeeds, which cannot be sent via DATA and receiving system does not 
>> >> support BDAT
>> >> 
>> >> Does anyone know whether the qmail toaster supports the SMTP protocol 
>> >> BDAT command ?
>> >> 
>> >> Thanks,
>> >> 
>> >> Jeff

[qmailtoaster] Rspamd suggestions

[Remo Mattei]

Hello guys, I have notice this on my server today any suggestions are welcomed.

Running rocky latest


2022-07-24 17:13:49 #241592(controller) <0fe744>; csession; 
rspamd_mime_part_detect_language: detected part language: en
2022-07-24 17:13:49 #241592(controller) <0fe744>; csession; 
rspamd_mime_part_detect_language: detected part language: en
2022-07-24 17:13:49 #241592(controller) <0fe744>; csession; 
dkim_module_key_handler: stored DKIM key for 
10dkim1._domainkey.eml.nordstromrack.com in LRU cache for 3483 seconds, 1/2000 
elements in the cache
2022-07-24 17:13:50 #241592(controller) <0fe744>; csession; 
rspamd_symcache_finalize_item: slow rule: MSBL_EBL(246): 509.44 ms; enable slow 
timer delay

2022-07-24 17:13:50 #241592(controller) <0fe744>; csession; 
rspamd_stat_classifiers_process: skip statistics as SPAM class is missing

I see the missing class 


Thanks, 
Remo
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] qmailadmin-1.2.16-3.2.qt.md.el7.x86_64 vs qmailadmin-1.2.16-3.2.qt.el7.x86_64

[Remo Mattei]

Sorry that’s not the issue for my topic!! 

Ignore my message. 

Remo 

> On Jul 18, 2022, at 12:19 PM, Remo Mattei  wrote:
> 
> ❯ dnf downgrade qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm
> Last metadata expiration check: 1:23:13 ago on Mon 18 Jul 2022 11:55:10 AM 
> MDT.
> Error:
>  Problem: conflicting requests
>   - nothing provides libmysqlclient.so.18()(64bit) needed by 
> qmailadmin-1.2.16-2.qt.md.el7.x86_64
>   - nothing provides libmysqlclient.so.18(libmysqlclient_18)(64bit) needed by 
> qmailadmin-1.2.16-2.qt.md.el7.x86_64
> (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to 
> use not only best candidate packages)
> 
> 
> 
> 
>> On Jul 18, 2022, at 11:41 AM, Remo Mattei > <mailto:r...@mattei.org>> wrote:
>> 
>> Ok I will try that. 
>> 
>>> Il giorno 18 lug 2022, alle ore 11:36, Eric Broch >> <mailto:ebr...@whitehorsetc.com>> ha scritto:
>>> 
>>> 
>>> I think it has something to do with the new interface.
>>> 
>>> Downgrade
>>> 
>>> http://repo.whitehorsetc.com/7/spl/sqlmd/current/x86_64/old/qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm
>>>  
>>> <http://repo.whitehorsetc.com/7/spl/sqlmd/current/x86_64/old/qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm>
>>> and it should work.
>>> 
>>> I'll let you know when I have the new interface fixed.
>>> 
>>> Eric
>>> 
>>> On 7/18/2022 8:09 AM, AAL wrote:
>>>> Hello list
>>>> 
>>>> We've two QMT running on CentOS7, just one with md install 
>>>> 
>>>> qmailadmin (with 'md')  doesn't provide all the ezmlm's features to manage 
>>>> lists
>>>> 
>>>> To be brief, graphically:
>>>> 
>>>> qmailadmin-1.2.16-3.2.qt.el7.x86_64 provides full ezmlm's features 
>>>> included in webGUI
>>>> 
>>>> <0iKOGVcSlptmQ6T0.png>
>>>> 
>>>> 
>>>> 
>>>> On the opposite, qmailadmin-1.2.16-3.2.qt.md.el7.x86_64,  has a very 
>>>> limited set:
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Is there something inherent to many domains setup causing this?
>>>> 
>>>> Can I recover full ezmlm's features in qmailadmin in some safe way? Both 
>>>> are productive servers and I would avoid disrupt some services by doing 
>>>> testing on it.
>>>> 
>>>> Many thanks in advance
>>>> 
>>>> 
>>>> 
>>>> __Abel
>>>> 
>>>> 
>>>> 
>>>> -- 
> 

Re: [qmailtoaster] qmailadmin-1.2.16-3.2.qt.md.el7.x86_64 vs qmailadmin-1.2.16-3.2.qt.el7.x86_64

[Remo Mattei]

❯ dnf downgrade qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm
Last metadata expiration check: 1:23:13 ago on Mon 18 Jul 2022 11:55:10 AM MDT.
Error:
 Problem: conflicting requests
  - nothing provides libmysqlclient.so.18()(64bit) needed by 
qmailadmin-1.2.16-2.qt.md.el7.x86_64
  - nothing provides libmysqlclient.so.18(libmysqlclient_18)(64bit) needed by 
qmailadmin-1.2.16-2.qt.md.el7.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use 
not only best candidate packages)




> On Jul 18, 2022, at 11:41 AM, Remo Mattei  wrote:
> 
> Ok I will try that. 
> 
>> Il giorno 18 lug 2022, alle ore 11:36, Eric Broch  
>> ha scritto:
>> 
>> 
>> I think it has something to do with the new interface.
>> 
>> Downgrade
>> 
>> http://repo.whitehorsetc.com/7/spl/sqlmd/current/x86_64/old/qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm
>>  
>> <http://repo.whitehorsetc.com/7/spl/sqlmd/current/x86_64/old/qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm>
>> and it should work.
>> 
>> I'll let you know when I have the new interface fixed.
>> 
>> Eric
>> 
>> On 7/18/2022 8:09 AM, AAL wrote:
>>> Hello list
>>> 
>>> We've two QMT running on CentOS7, just one with md install 
>>> 
>>> qmailadmin (with 'md')  doesn't provide all the ezmlm's features to manage 
>>> lists
>>> 
>>> To be brief, graphically:
>>> 
>>> qmailadmin-1.2.16-3.2.qt.el7.x86_64 provides full ezmlm's features included 
>>> in webGUI
>>> 
>>> <0iKOGVcSlptmQ6T0.png>
>>> 
>>> 
>>> 
>>> On the opposite, qmailadmin-1.2.16-3.2.qt.md.el7.x86_64,  has a very 
>>> limited set:
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Is there something inherent to many domains setup causing this?
>>> 
>>> Can I recover full ezmlm's features in qmailadmin in some safe way? Both 
>>> are productive servers and I would avoid disrupt some services by doing 
>>> testing on it.
>>> 
>>> Many thanks in advance
>>> 
>>> 
>>> 
>>> __Abel
>>> 
>>> 
>>> 
>>> -- 

Re: [qmailtoaster] qmailadmin-1.2.16-3.2.qt.md.el7.x86_64 vs qmailadmin-1.2.16-3.2.qt.el7.x86_64

[Remo Mattei]

Ok I will try that. 

> Il giorno 18 lug 2022, alle ore 11:36, Eric Broch  
> ha scritto:
> 
> 
> I think it has something to do with the new interface.
> 
> Downgrade
> 
> http://repo.whitehorsetc.com/7/spl/sqlmd/current/x86_64/old/qmailadmin-1.2.16-2.qt.md.el7.x86_64.rpm
> 
> and it should work.
> 
> I'll let you know when I have the new interface fixed.
> 
> Eric
> 
>> On 7/18/2022 8:09 AM, AAL wrote:
>> Hello list
>> 
>> We've two QMT running on CentOS7, just one with md install 
>> 
>> qmailadmin (with 'md')  doesn't provide all the ezmlm's features to manage 
>> lists
>> 
>> To be brief, graphically:
>> 
>> qmailadmin-1.2.16-3.2.qt.el7.x86_64 provides full ezmlm's features included 
>> in webGUI
>> 
>> 
>> 
>> 
>> 
>> On the opposite, qmailadmin-1.2.16-3.2.qt.md.el7.x86_64,  has a very limited 
>> set:
>> 
>> 
>> 
>> 
>> 
>> Is there something inherent to many domains setup causing this?
>> 
>> Can I recover full ezmlm's features in qmailadmin in some safe way? Both are 
>> productive servers and I would avoid disrupt some services by doing testing 
>> on it.
>> 
>> Many thanks in advance
>> 
>> 
>> 
>> __Abel
>> 
>> 
>> 
>> -- 
>> 

Re: [qmailtoaster] DSPAM using lots of mysql

[Remo Mattei]

Ok that got fixed with the mariadb-devel :) 

Just in case someone else was wondering.

Remo

> On Jul 18, 2022, at 10:43 AM, Remo Mattei  wrote:
> 
> Hello guys, I also notice this on Rocky 
> 
> 0logwatch  dspam  logrotate  squirrelmail.cron
> 
> root in rocky in /etc/cron.daily
> ❯ sh dspam
> Can not run MySQL purge script:
>  /usr/bin/mysql_config does not exist
> 
> Where in my other centos7 works just fine, I will have to tack it down, as I 
> am traveling now. 
> 
> Remo 
> 
>> On Jul 18, 2022, at 9:27 AM, Eric Broch  wrote:
>> 
>> Are you sure it's dspam database?
>> 
>> # du -sh /var/lib/mysql/*
>> 
>> # man dspam_clean
>> 
>> # dspam_clean -s -p -u30,15,10,10 u...@domain.com
>> 
>> 
>> On 7/18/2022 9:37 AM, Remo Mattei wrote:
>>> Hello any suggestions on cleaning up my DSPAM? It’s using 70GB :).
>>> 
>>> Thanks
>>> Remo
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>> 
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] DSPAM using lots of mysql

[Remo Mattei]

Hello guys, I also notice this on Rocky 

0logwatch  dspam  logrotate  squirrelmail.cron

root in rocky in /etc/cron.daily
❯ sh dspam
Can not run MySQL purge script:
  /usr/bin/mysql_config does not exist

Where in my other centos7 works just fine, I will have to tack it down, as I am 
traveling now. 

Remo 

> On Jul 18, 2022, at 9:27 AM, Eric Broch  wrote:
> 
> Are you sure it's dspam database?
> 
> # du -sh /var/lib/mysql/*
> 
> # man dspam_clean
> 
> # dspam_clean -s -p -u30,15,10,10 u...@domain.com
> 
> 
> On 7/18/2022 9:37 AM, Remo Mattei wrote:
>> Hello any suggestions on cleaning up my DSPAM? It’s using 70GB :).
>> 
>> Thanks
>> Remo
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] DSPAM using lots of mysql

[Remo Mattei]

Hello any suggestions on cleaning up my DSPAM? It’s using 70GB :).

Thanks 
Remo 
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] New Install

[Remo Mattei]

Sounds good to see what it’s missing so others can have it fixed as well. 

Thanks. 

Remo

> Il giorno 11 lug 2022, alle ore 13:15, Philip Nix Guru  ha 
> scritto:
> 
> 
> Well it will just generate en error
> 
> but it wont block anything 
> 
> I dont see the point having a razor in spamdoptions and it is not really 
> configured
> 
> you have to issue commands to register create and discover through 
> razor-admin command
> 
> 
> 
> or I missed something on the toaster page .. I ll go check after installing 
> tweaks :)
> 
> 
> 
>> On 7/11/22 20:05, Remo Mattei wrote:
>> But on my other one I do see:
>> 
>> # Options to spamd
>> SPAMDOPTIONS="-c -m5 -H --razor-home-dir='/var/lib/razor/' 
>> --razor-log-file='sys-syslog'"
>> 
>> 
>> And I do not have any issues as I recall on this box for mail. 
>> 
>> Remo 
>> 
>>> On Jul 8, 2022, at 12:36 AM, Philip Nix Guru  wrote:
>>> 
>>> Hello
>>> 
>>> AlmaLinux
>>> 
>>> 
>>> 
>>> check your /etc/sysconfig/spamassassin
>>> 
>>> SPAMDOPTIONS="-c -m5 -H --razor-home-dir='/var/lib/razor/' 
>>> --razor-log-file='sys-syslog'"
>>> 
>>> 
>>> 
>>> Regards
>>> 
>>> -Philip
>>> 
>>> 
>>> 
>>> On 7/8/22 03:50, Remo Mattei wrote:
>>>> I wonder what OS are you running? I will have to check my rocky but I have 
>>>> not had any issues. 
>>>> 
>>>>> Il giorno 7 lug 2022, alle ore 18:21, Philip Nix Guru  ha 
>>>>> scritto:
>>>>> 
>>>>> Hello
>>>>> 
>>>>> I was just checking a new install with all the new features (dspam rspam 
>>>>> tls ...)
>>>>> 
>>>>> 
>>>>> I noticed that spamassassin is called with razor2
>>>>> 
>>>>> /usr/bin/perl -T -w /usr/bin/spamd -c -m5 -H 
>>>>> --razor-home-dir=/var/lib/razor/ --razor-log-file=sys-syslog
>>>>> 
>>>>> 
>>>>> But that folder /var/lib/razor is not created in the install process and 
>>>>> will then trigger an error
>>>>> 
>>>>> razor2: razor2 check failed: No such file or directory razor2: Can't 
>>>>> read: /var/lib/razor/ at /usr/share/perl5/vendor_perl/Mail/Spam
>>>>> Assassin/Plugin/Razor2.pm
>>>>> 
>>>>> 
>>>>> just passing the info
>>>>> 
>>>>> Regards
>>>>> 
>>>>> -Philip
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> -
>>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>>> 
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>> 
>> 

Re: [qmailtoaster] New Install

[Remo Mattei]

But on my other one I do see:

# Options to spamd
SPAMDOPTIONS="-c -m5 -H --razor-home-dir='/var/lib/razor/' 
--razor-log-file='sys-syslog'"


And I do not have any issues as I recall on this box for mail. 

Remo 

> On Jul 8, 2022, at 12:36 AM, Philip Nix Guru  wrote:
> 
> Hello
> 
> AlmaLinux
> 
> 
> 
> check your /etc/sysconfig/spamassassin
> 
> SPAMDOPTIONS="-c -m5 -H --razor-home-dir='/var/lib/razor/' 
> --razor-log-file='sys-syslog'"
> 
> 
> 
> Regards
> 
> -Philip
> 
> 
> 
> On 7/8/22 03:50, Remo Mattei wrote:
>> I wonder what OS are you running? I will have to check my rocky but I have 
>> not had any issues. 
>> 
>>> Il giorno 7 lug 2022, alle ore 18:21, Philip Nix Guru  
>>> <mailto:phi...@ows.ch> ha scritto:
>>> 
>>> Hello
>>> 
>>> I was just checking a new install with all the new features (dspam rspam 
>>> tls ...)
>>> 
>>> 
>>> I noticed that spamassassin is called with razor2
>>> 
>>> /usr/bin/perl -T -w /usr/bin/spamd -c -m5 -H 
>>> --razor-home-dir=/var/lib/razor/ --razor-log-file=sys-syslog
>>> 
>>> 
>>> But that folder /var/lib/razor is not created in the install process and 
>>> will then trigger an error
>>> 
>>> razor2: razor2 check failed: No such file or directory razor2: Can't read: 
>>> /var/lib/razor/ at /usr/share/perl5/vendor_perl/Mail/Spam
>>> Assassin/Plugin/Razor2.pm
>>> 
>>> 
>>> just passing the info
>>> 
>>> Regards
>>> 
>>> -Philip
>>> 
>>> 
>>> 
>>> 
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>>> <mailto:qmailtoaster-list-h...@qmailtoaster.com>
>>> 
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>> <mailto:qmailtoaster-list-h...@qmailtoaster.com>
>> 

Re: [qmailtoaster] New Install

[Remo Mattei]

This is my spamassassin

# Options to spamd
SPAMDOPTIONS="--create-prefs -m10 -q -x -u clamscan"
~
~
~
~
As I do not see the razor on my default config in Rocky Linux. 

Remo 

> On Jul 8, 2022, at 12:36 AM, Philip Nix Guru  wrote:
> 
> Hello
> 
> AlmaLinux
> 
> 
> 
> check your /etc/sysconfig/spamassassin
> 
> SPAMDOPTIONS="-c -m5 -H --razor-home-dir='/var/lib/razor/' 
> --razor-log-file='sys-syslog'"
> 
> 
> 
> Regards
> 
> -Philip
> 
> 
> 
> On 7/8/22 03:50, Remo Mattei wrote:
>> I wonder what OS are you running? I will have to check my rocky but I have 
>> not had any issues. 
>> 
>>> Il giorno 7 lug 2022, alle ore 18:21, Philip Nix Guru  
>>> <mailto:phi...@ows.ch> ha scritto:
>>> 
>>> Hello
>>> 
>>> I was just checking a new install with all the new features (dspam rspam 
>>> tls ...)
>>> 
>>> 
>>> I noticed that spamassassin is called with razor2
>>> 
>>> /usr/bin/perl -T -w /usr/bin/spamd -c -m5 -H 
>>> --razor-home-dir=/var/lib/razor/ --razor-log-file=sys-syslog
>>> 
>>> 
>>> But that folder /var/lib/razor is not created in the install process and 
>>> will then trigger an error
>>> 
>>> razor2: razor2 check failed: No such file or directory razor2: Can't read: 
>>> /var/lib/razor/ at /usr/share/perl5/vendor_perl/Mail/Spam
>>> Assassin/Plugin/Razor2.pm
>>> 
>>> 
>>> just passing the info
>>> 
>>> Regards
>>> 
>>> -Philip
>>> 
>>> 
>>> 
>>> 
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>>> <mailto:qmailtoaster-list-h...@qmailtoaster.com>
>>> 
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
>> <mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
>> <mailto:qmailtoaster-list-h...@qmailtoaster.com>
>> 

Re: [qmailtoaster] New Install

[Remo Mattei]

I wonder what OS are you running? I will have to check my rocky but I have not 
had any issues. 

> Il giorno 7 lug 2022, alle ore 18:21, Philip Nix Guru  ha 
> scritto:
> 
> Hello
> 
> I was just checking a new install with all the new features (dspam rspam tls 
> ...)
> 
> 
> I noticed that spamassassin is called with razor2
> 
> /usr/bin/perl -T -w /usr/bin/spamd -c -m5 -H --razor-home-dir=/var/lib/razor/ 
> --razor-log-file=sys-syslog
> 
> 
> But that folder /var/lib/razor is not created in the install process and will 
> then trigger an error
> 
> razor2: razor2 check failed: No such file or directory razor2: Can't read: 
> /var/lib/razor/ at /usr/share/perl5/vendor_perl/Mail/Spam
> Assassin/Plugin/Razor2.pm
> 
> 
> just passing the info
> 
> Regards
> 
> -Philip
> 
> 
> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: **SPAM** [qmailtoaster] SSL/TLS issue

[Remo Mattei]

I am running rocky latest as well I did not notice anything about this but I 
can check my system and share. 

> Il giorno 4 lug 2022, alle ore 08:30, Qmail  ha scritto:
> 
> Hi all
> 
> I'm Running Rocky - latest and greatest release.
> 
> After updating my Qmail to Rel. 1.03-3.3.7.qt.md.el8  (@qmt-md-testing) and  
> spamdyke to Rel. 5.0.1-3.qt.el8 (@qmt-testing)  I receive this in my maillog 
> file :
> 
> Jul  4 16:40:42 post spamdyke[4240]: ERROR(tls_init_inner()@tls.c:345): 
> unable to set SSL/TLS cipher list: DEFAULT: A protocol or library failure 
> occurred, error:1426E0B9:SSL routines:ciphersuite_cb:no cipher match
> Jul  4 16:40:42 post spamdyke[4240]: ERROR(tls_init_inner()@tls.c:355): 
> unable to initialize SSL/TLS library
> Jul  4 16:40:42 post spamdyke[4240]: TLS_ENCRYPTED from: (unknown) to: 
> (unknown) origin_ip: 91.123.194.221 origin_rdns: mta-56.gansend2.com auth: 
> (unknown) encryption: TLS_PASSTHROUGH reason: (empty)
> 
> 
> I have checked against my prevoius running qmail 1.03-3.3.5.qt.md.el8 
> instance and there is no changes to the tlsserverciphers.
> 
> update-crypto-policies=LEGACY
> opensslcnf.config  having  CipherString = @SECLEVEL=1
> 
> In my /var/log/qmail/smtp file all is fine
> 
> 
> All mails seems to pass through anyway but ...
> 
> 
> What am I missing ?  what's changed in spamdyke ?
> 
> 
> Thanks,
> Finn
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] iPhone updates / new ssl breaks connection

[Remo Mattei]

Thank you!

> On Apr 27, 2022, at 13:43, Eric Broch  wrote:
> 
> This is the correct procedure for creating file updcerts.sh :
> 
> cat <<'EOL'>> updcerts.sh
> #!/bin/bash
> 
> mailcert () {
> cat /etc/letsencrypt/live/mail.whitehorsetc.com/privkey.pem 
> /etc/letsencrypt/live/mail.whitehorsetc.com/fullchain.pem > ./servercert.pem
> cp -p /var/qmail/control/servercert.pem 
> /var/qmail/control/servercert.pem.bak
> cp ./servercert.pem  /var/qmail/control/servercert.pem
> systemctl reload dovecot
> qmailctl stop && sleep 2 && qmailctl start
> }
> 
> LOG=/var/log/certs.log
> days=3
> today=`date`
> today=`date --date="$today" --utc +%s`
> certdir=/etc/letsencrypt/live
> certfile=fullchain.pem
> 
> for certdom in `ls $certdir`
> do
>exp=`openssl x509 -dates -noout < $certdir/$certdom/$certfile | grep 
> notAfter | sed 's/notAfter=//'`
>off=`date --date="$exp" --utc +%s`
>diff=$(( (off - today)/86400 ))
>echo "Certificate Domain: $certdom, Days to expire: $diff"
>echo ""
>if [ $diff -le $days ]
>then
>   certbot renew --cert-name $certdom
>   systemctl reload httpd
>   [ "$certdom" = "mail.whitehorsetc.com" ] && mailcert
>fi
> done
> exit 0
> EOL
> 
> On 4/27/2022 2:18 PM, Eric Broch wrote:
>> I run updcert.sh every night (set 'days=X', which is the number of days 
>> before expiration at which time the certificate will be updated):
>> 
>> cat updcert.sh <> 
>> #!/bin/bash
>> 
>> mailcert () {
>>cat /etc/letsencrypt/live/mail.whitehorsetc.com/privkey.pem 
>> /etc/letsencrypt/live/mail.whitehorsetc.com/fullchain.pem > ./servercert.pem
>>cp -p /var/qmail/control/servercert.pem 
>> /var/qmail/control/servercert.pem.bak
>>cp ./servercert.pem  /var/qmail/control/servercert.pem
>>systemctl reload dovecot
>>qmailctl stop && sleep 2 && qmailctl start
>> }
>> 
>> LOG=/var/log/certs.log
>> days=3
>> 
>> today=`date`
>> today=`date --date="$today" --utc +%s`
>> certdir=/etc/letsencrypt/live
>> certfile=fullchain.pem
>> 
>> for certdom in `ls $certdir`
>> do
>>exp=`openssl x509 -dates -noout < $certdir/$certdom/$certfile | grep 
>> notAfter | sed 's/notAfter=//'`
>>off=`date --date="$exp" --utc +%s`
>>diff=$(( (off - today)/86400 ))
>>echo "Certificate Domain: $certdom, Days to expire: $diff"
>>echo ""
>>if [ $diff -le $days ]
>>then
>>   certbot renew --cert-name $certdom
>>   systemctl reload httpd
>>   [ "$certdom" = "mail.whitehorsetc.com" ] && mailcert
>>fi
>> done
>> 
>> exit 0
>> 
>> EOL
>> 
>> On 4/27/2022 1:07 PM, Remo Mattei wrote:
>>> Hi David, can you share your config maybe I ping you offlinee.
>>> 
>>> Remo
>>> 
>>>> On Apr 26, 2022, at 23:55, David Bray  wrote:
>>>> 
>>>> I'm using Letsencrypt and it renews every - well not sure, is it 10/11 
>>>> weeks - the certs are valid for 3 months
>>>> 
>>>> It never has an issue with iOS
>>>> 
>>>> Cheers
>>>> 
>>>> David Bray
>>>> e. da...@brayworth.com
>>>> 
>>>> April 27, 2022 1:47 AM, "Remo Mattei"  wrote:
>>>> 
>>>>> Hello guys,
>>>>> I got a few of my customers that every year after the upgrade of the SSL 
>>>>> cert do have issues and
>>>>> shows cert expired or not valid. I did not have the issue on my iOS, but 
>>>>> I just wonder if anyone
>>>>> has seen that and how they planned to overcome to this issue.
>>>>> 
>>>>> Thanks,
>>>>> Remo
>>>>> -
>>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>> -
>>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>>> 
>>> 
>>> -
>>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>>> 
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] iPhone updates / new ssl breaks connection

[Remo Mattei]

Hi David, can you share your config maybe I ping you offline.

Remo

> On Apr 26, 2022, at 23:55, David Bray  wrote:
> 
> I'm using Letsencrypt and it renews every - well not sure, is it 10/11 weeks 
> - the certs are valid for 3 months
> 
> It never has an issue with iOS
> 
> Cheers
> 
> David Bray
> e. da...@brayworth.com
> 
> April 27, 2022 1:47 AM, "Remo Mattei"  wrote:
> 
>> Hello guys, 
>> I got a few of my customers that every year after the upgrade of the SSL 
>> cert do have issues and
>> shows cert expired or not valid. I did not have the issue on my iOS, but I 
>> just wonder if anyone
>> has seen that and how they planned to overcome to this issue. 
>> 
>> Thanks, 
>> Remo
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] iPhone updates / new ssl breaks connection

[Remo Mattei]

Hello guys, 
I got a few of my customers that every year after the upgrade of the SSL cert 
do have issues and shows cert expired or not valid. I did not have the issue on 
my iOS, but I just wonder if anyone has seen that and how they planned to 
overcome to this issue. 

Thanks, 
Remo
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Any suggestions on this error?

[Remo Mattei]

spamdyke[2193]: ERROR(tls_init_inner()@tls.c:355): unable to initialize SSL/TLS 
library

Thanks 
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Roundcube error after upgrade

[Remo Mattei]

Hi Eric, 
It’s on centos 7, and it’s the beta release of the roundcubemail from Remi 
version 1.6

Remo 

> On Apr 2, 2022, at 22:21, Eric Broch  wrote:
> 
> What server software 7 or 8
> On Apr 2, 2022, at 11:03 PM, Remo Mattei  <mailto:r...@mattei.org>> wrote:
> I fixed it with the yum downgrade if anyone else is going to get this error.
> 
> Remo 
> 
> 
> 
>> On Apr 2, 2022, at 21:03, Remo Mattei < r...@mattei.org 
>> <mailto:r...@mattei.org>> wrote:
>> 
>> Hello guys, I am getting this error on my round cube after the upgrade
>> 
>> FILE NOT FOUND
>> 
>> The requested resource was not found!
>> Please contact your server-administrator.
>> Failed request: 
>> qmail..com/email/?_task=mail&_token=IjbGQdGExemBTWPnImy7ETCeGknOr782 
>> <http://qmail..com/email/?_task=mail&_token=IjbGQdGExemBTWPnImy7ETCeGknOr782>
>> 
>> Any suggestions?
>> 
>> Thanks, 
>> Remo
> 

Re: [qmailtoaster] Roundcube error after upgrade

[Remo Mattei]

I fixed it with the yum downgrade if anyone else is going to get this error.

Remo 



> On Apr 2, 2022, at 21:03, Remo Mattei  wrote:
> 
> Hello guys, I am getting this error on my round cube after the upgrade
> 
> FILE NOT FOUND
> 
> The requested resource was not found!
> Please contact your server-administrator.
> Failed request: 
> qmail..com/email/?_task=mail&_token=IjbGQdGExemBTWPnImy7ETCeGknOr782 
> <http://qmail..com/email/?_task=mail&_token=IjbGQdGExemBTWPnImy7ETCeGknOr782>
> 
> Any suggestions?
> 
> Thanks, 
> Remo

[qmailtoaster] Roundcube error after upgrade

[Remo Mattei]

Hello guys, I am getting this error on my round cube after the upgrade

FILE NOT FOUND

The requested resource was not found!
Please contact your server-administrator.
Failed request: 
qmail..com/email/?_task=mail&_token=IjbGQdGExemBTWPnImy7ETCeGknOr782


Any suggestions?

Thanks, 
Remo

Re: [qmailtoaster] About hide my email

[Remo Mattei]

Hello Eric, 
That could be an option which if we could integrate that into Roundcube as a 
module, or other web UI then that could be a cool solution. Long time ago, I 
used qmail configured with TMDA but that project died long ago. 

Remo 

> On Apr 1, 2022, at 04:50, Eric Broch  wrote:
> 
> Is this what you're looking for?
> 
> https://www.businessinsider.com/how-to-make-a-throwaway-email-account
> 
> On 3/27/2022 9:51 AM, Remo wrote:
>> Hi guys
>> I kind of like the new option about iCloud hide my email how could we do it 
>> with qmail
>> 
>> Thanks.
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Dovecot update on centos 8 / rocky 8 issue

[Remo Mattei]

Thanks Eric, 
I did check and that’s correct 

Remo 

> On Feb 5, 2022, at 09:41, Eric Broch  wrote:
> 
> May be they moved it to the RHEL tree
> 
> http://repo.dovecot.org/ce-2.3-latest/rhel/8/RPMS/x86_64/
> 
> On 2/5/2022 10:26 AM, Remo Mattei wrote:
>> Hi all,
>> Has anyone seen this I think it’s down
>> 
>> Thanks
>> 
>>  ❯ yum update
>> Dovecot 2.3 CentOS 8 - x86_64
>> 200  B/s | 146  
>> B 00:00
>> Errors during downloading metadata for repository 'dovecot-2.3-latest':
>>   - Status code: 404 for 
>> http://repo.dovecot.org/ce-2.3-latest/centos/8/RPMS/x86_64/repodata/repomd.xml
>>  (IP: 94.237.82.12)
>> Error: Failed to download metadata for repo 'dovecot-2.3-latest': Cannot 
>> download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were 
>> tried
>> 
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Dovecot update on centos 8 / rocky 8 issue

[Remo Mattei]

Hi all,
Has anyone seen this I think it’s down 

Thanks 

 
❯ yum update
Dovecot 2.3 CentOS 8 - x86_64   
 200  B/s | 146  B 
00:00
Errors during downloading metadata for repository 'dovecot-2.3-latest':
  - Status code: 404 for 
http://repo.dovecot.org/ce-2.3-latest/centos/8/RPMS/x86_64/repodata/repomd.xml 
(IP: 94.237.82.12)
Error: Failed to download metadata for repo 'dovecot-2.3-latest': Cannot 
download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Issue with clamav

[Remo Mattei]

Looks like this fixes it

15800

> On Jan 30, 2022, at 21:33, Remo Mattei  wrote:
> 
> I search and found that more ram did fix it for me in the past, I wonder why 
> we still get this after upgrades?
> 
>> On Jan 30, 2022, at 21:31, Remo Mattei  wrote:
>> 
>> Has anyone seen this error after the upgrade?
>> 
>> Thanks 
>> clamdscan: error while loading shared libraries: libtasn1.so.6: failed to 
>> map segment from shared object: Cannot allocate memory
>> 
>> 
>> 
>> -
>> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
>> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>> 
> 
> 
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
> 


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com