subject:"Re\: \[quadstor\-vtl\] How configure TSM"

Re: [quadstor-vtl] How configure TSM

2020-05-18 Thread QUADStor VTL Support

Hi

On Fri, May 15, 2020 at 9:28 PM Sergey Kamyanov  wrote:

> AFAIK Qlogic is the only supported option for the frontend connectivity,
> so no Qlogic - no VTL access.
> In the recent versions ‘Access Management’ tab shows both Emulex and
> Qlogic cards as 'Initiator,Target’ - so I might be wrong with the previous
> statement - better confirm with the Quadstor Team.
>
> Only Qlogic should be listed. Emulex isn't supported by the VTL for target
mode and should not be listed. We will fix this.


> Perfectly working config for TSM:
>
> Dual port Emulex card(s) for the backend connectivity (zoned to storage
> array(s))
> Dual port Qlogic card(s) for the frontend connectivity (zoned to VTL
> consumers)
>
> SSD LUN from storage array or local SSDs in RAID-1/10 for ‘Default’
> storage pool (dedup metadata only)
> NLSAS/SATA LUNs from storage array(s) or local RAID-5 (for the smaller
> installations) for the storage pool with virtual cartridges
>
> Everything will work without SSDs, but it takes forever (~30 minutes for
>  ~120Tb of vcartridge data) to load dd tables from NLSAS during service
> startup.
>

>From the logs we have, this system started with a 4GB RAM to 32GB later.
Ideally the memory sizing should be done very early and probably on a
higher side than required, most of the deduplication tables can then be
placed sequentially on disk. The ones created later will most lead to
random IO and really can slow down the startup or shutdown time.

There is an option to realign the tables sequentially but it's still work
in progress.



>
> VTL library emulation: TS3500 (IBM 3584)
>
> lin_tape driver on Linux servers (with persistent device naming
> configuration, as per IBM document)
> Atape driver on AIX servers
>
> Please post the output of `lspci | grep Fibre` from the VTL server to list
> all the FC cards available to the system, just to make sure.
>
> Best,
> Sergey
>
> On 15 May 2020 at 17:50:27, Carlos Alexandre (carlos.xand...@gmail.com)
> wrote:
>
> Hi,
>
> Qlogic does not appear but Emulex follows:
>
> vtl:/var/log # dmesg | grep Emulex
> [2.633399] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.7-5
> [2.634093] scsi host2: Emulex LPe12000 PCIe Fibre Channel Adapter on
> PCI bus 06 device 00 irq 16
> [4.857366] scsi host10: Emulex LPe12000 PCIe Fibre Channel Adapter on
> PCI bus 06 device 01 irq 17
>
>
> --
> vtl:/var/log # lspci -v -s 06:00.0
> 06:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre
> Channel Host Adapter (rev 03)
> Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel
> Host Adapter
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at fbbba000 (64-bit, non-prefetchable) [size=4K]
> Memory at fbbb4000 (64-bit, non-prefetchable) [size=16K]
> I/O ports at c400 [size=256]
> Expansion ROM at fbb4 [disabled] [size=256K]
> Capabilities: [58] Power Management version 3
> Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
> Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
> Capabilities: [84] Vital Product Data
> Capabilities: [94] Express Endpoint, MSI 00
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [12c] Power Budgeting 
> Kernel driver in use: lpfc
> Kernel modules: lpfc
>
>
> Regards.
>
> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/quadstor-vtl/da4af6d5-65a8-45c4-84bf-8e75e1598b24%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/quadstor-vtl/CAAC98Q%3DkUw5E4S8A7DjULzX2OGg%3DzJ8EM4Mm8T%3DtHTPq7BSUkQ%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit

Re: [quadstor-vtl] How configure TSM

2020-05-18 Thread QUADStor VTL Support

Hi,


On Fri, May 15, 2020 at 10:34 PM Carlos Alexandre 
wrote:

> Hi Sergey,
>
> Follow:
>
> vtl:/sys/class/scsi_host/host1 # lspci -nn |grep -i fibre
> 06:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse
> Fibre Channel Host Adapter [10df:f100] (rev 03)
> 06:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse
> Fibre Channel Host Adapter [10df:f100] (rev 03)
>

You would need a Qlogic card in that system.

>
> Regards.
>
> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/quadstor-vtl/9b1fc6f4-233c-4ea9-bd0b-5a49e277d7d4%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt48NMn7zXjbf9mape1PdzxkL52z7HaetZp6OCaiTg7apQ%40mail.gmail.com.

Re: [quadstor-vtl] How configure TSM

2020-05-15 Thread Carlos Alexandre

Hi Sergey,

Follow:

vtl:/sys/class/scsi_host/host1 # lspci -nn |grep -i fibre
06:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre 
Channel Host Adapter [10df:f100] (rev 03)
06:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre 
Channel Host Adapter [10df:f100] (rev 03)

Regards.

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/9b1fc6f4-233c-4ea9-bd0b-5a49e277d7d4%40googlegroups.com.

Re: [quadstor-vtl] How configure TSM

2020-05-15 Thread Sergey Kamyanov

AFAIK Qlogic is the only supported option for the frontend connectivity, so
no Qlogic - no VTL access.
In the recent versions ‘Access Management’ tab shows both Emulex and Qlogic
cards as 'Initiator,Target’ - so I might be wrong with the previous
statement - better confirm with the Quadstor Team.


Perfectly working config for TSM:

Dual port Emulex card(s) for the backend connectivity (zoned to storage
array(s))
Dual port Qlogic card(s) for the frontend connectivity (zoned to VTL
consumers)

SSD LUN from storage array or local SSDs in RAID-1/10 for ‘Default’ storage
pool (dedup metadata only)
NLSAS/SATA LUNs from storage array(s) or local RAID-5 (for the smaller
installations) for the storage pool with virtual cartridges

Everything will work without SSDs, but it takes forever (~30 minutes for
 ~120Tb of vcartridge data) to load dd tables from NLSAS during service
startup.

VTL library emulation: TS3500 (IBM 3584)

lin_tape driver on Linux servers (with persistent device naming
configuration, as per IBM document)
Atape driver on AIX servers

Please post the output of `lspci | grep Fibre` from the VTL server to list
all the FC cards available to the system, just to make sure.

Best,
Sergey

On 15 May 2020 at 17:50:27, Carlos Alexandre (carlos.xand...@gmail.com)
wrote:

Hi,

Qlogic does not appear but Emulex follows:

vtl:/var/log # dmesg | grep Emulex
[2.633399] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.7-5
[2.634093] scsi host2: Emulex LPe12000 PCIe Fibre Channel Adapter on
PCI bus 06 device 00 irq 16
[4.857366] scsi host10: Emulex LPe12000 PCIe Fibre Channel Adapter on
PCI bus 06 device 01 irq 17

--
vtl:/var/log # lspci -v -s 06:00.0
06:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre
Channel Host Adapter (rev 03)
Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel
Host Adapter
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fbbba000 (64-bit, non-prefetchable) [size=4K]
Memory at fbbb4000 (64-bit, non-prefetchable) [size=16K]
I/O ports at c400 [size=256]
Expansion ROM at fbb4 [disabled] [size=256K]
Capabilities: [58] Power Management version 3
Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
Capabilities: [84] Vital Product Data
Capabilities: [94] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Power Budgeting 
Kernel driver in use: lpfc
Kernel modules: lpfc


Regards.

-- 
You received this message because you are subscribed to the Google Groups
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/quadstor-vtl/da4af6d5-65a8-45c4-84bf-8e75e1598b24%40googlegroups.com

.

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/CAAC98Q%3DkUw5E4S8A7DjULzX2OGg%3DzJ8EM4Mm8T%3DtHTPq7BSUkQ%40mail.gmail.com.

Re: [quadstor-vtl] How configure TSM

2020-05-15 Thread QUADStor VTL Support

Hi,

You will need a QLogic adapter on the VTL system . 4Gb/s or higher speed
(4/8/16/32 Gb)
The VTL software will not work with Emulex cards


On Fri, May 15, 2020 at 8:20 PM Carlos Alexandre 
wrote:

> Hi,
>
> Follows the model the driver information...
>
> vtl:/sys/class/scsi_host/host1 # modinfo lpfc |egrep -v 'alias|parm'
> filename:
>  /lib/modules/4.4.180-94.100-default/kernel/drivers/scsi/lpfc/lpfc.ko
> version:0:11.4.0.7-5
> author: Broadcom
> description:Emulex LightPulse Fibre Channel SCSI driver 11.4.0.7-5
> license:GPL
> srcversion: 3F9F6D1BCC2F45D024D083D
> depends:scsi_mod,nvme-fc,scsi_transport_fc,nvmet-fc
> supported:  yes
> retpoline:  Y
> intree: Y
> vermagic:   4.4.180-94.100-default SMP mod_unload modversions
> signer: SUSE Linux Enterprise Secure Boot Signkey
> sig_key:3F:B0:77:B6:CE:BC:6F:F2:52:2E:1C:14:8C:57:C7:77:C7:88:E3:E7
> sig_hashalgo:   sha256
>
> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/quadstor-vtl/67be27e9-3448-4518-b71b-112590dbbb85%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt4X-yJAXyN6NJtBg0NphxCTaVK-UP0hy_w0riW25gEsKg%40mail.gmail.com.

Re: [quadstor-vtl] How configure TSM

2020-05-15 Thread Carlos Alexandre

Hi,

Qlogic does not appear but Emulex follows:

vtl:/var/log # dmesg | grep Emulex
[2.633399] Emulex LightPulse Fibre Channel SCSI driver 11.4.0.7-5
[2.634093] scsi host2: Emulex LPe12000 PCIe Fibre Channel Adapter on 
PCI bus 06 device 00 irq 16
[4.857366] scsi host10: Emulex LPe12000 PCIe Fibre Channel Adapter on 
PCI bus 06 device 01 irq 17

--
vtl:/var/log # lspci -v -s 06:00.0
06:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre 
Channel Host Adapter (rev 03)
Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel 
Host Adapter
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fbbba000 (64-bit, non-prefetchable) [size=4K]
Memory at fbbb4000 (64-bit, non-prefetchable) [size=16K]
I/O ports at c400 [size=256]
Expansion ROM at fbb4 [disabled] [size=256K]
Capabilities: [58] Power Management version 3
Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
Capabilities: [84] Vital Product Data
Capabilities: [94] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Power Budgeting 
Kernel driver in use: lpfc
Kernel modules: lpfc


Regards.

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/da4af6d5-65a8-45c4-84bf-8e75e1598b24%40googlegroups.com.

Re: [quadstor-vtl] How configure TSM

2020-05-15 Thread Carlos Alexandre

Hi,

Follows the model the driver information...

vtl:/sys/class/scsi_host/host1 # modinfo lpfc |egrep -v 'alias|parm'
filename:  
 /lib/modules/4.4.180-94.100-default/kernel/drivers/scsi/lpfc/lpfc.ko
version:0:11.4.0.7-5
author: Broadcom
description:Emulex LightPulse Fibre Channel SCSI driver 11.4.0.7-5
license:GPL
srcversion: 3F9F6D1BCC2F45D024D083D
depends:scsi_mod,nvme-fc,scsi_transport_fc,nvmet-fc
supported:  yes
retpoline:  Y
intree: Y
vermagic:   4.4.180-94.100-default SMP mod_unload modversions
signer: SUSE Linux Enterprise Secure Boot Signkey
sig_key:3F:B0:77:B6:CE:BC:6F:F2:52:2E:1C:14:8C:57:C7:77:C7:88:E3:E7
sig_hashalgo:   sha256

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/67be27e9-3448-4518-b71b-112590dbbb85%40googlegroups.com.

Re: [quadstor-vtl] How configure TSM

2020-05-14 Thread QUADStor VTL Support

Hi,

A few other points
1. We are not able to trace the model of the QLogic card installed. Can you
post the output of
lspci
or
lspci | grep -i qlogic

2. The QLogic driver loaded is version 10.x which isn't the version of the
QLogic driver we install. We suggest
rpm -e `rpm -qa | grep quadstor-vtl`
rpm -i
https://www.quadstor.com/vtldownloads/quadstor-vtl-ext-3.0.43-sles12.x86_64.rpm
reboot

The package reinstall will install the driver again



On Fri, May 15, 2020 at 1:04 AM QUADStor VTL Support <
vtlsupp...@quadstor.com> wrote:

> You need a reboot after the VTL software install. That is the only way the
> VTL fc driver is picked up and replaces the current qla2xxx driver. Please
> try a restart and then rescan for devices again on the TSM server side the
> VTL device should appear under /dev/
>
> You can use https://www.quadstor.com/vtlnext/fcrescan script on linux to
> rescan for FC devices.
> Usage on the TSM server as root user
> sh fcrescan
>
>
> On Fri, May 15, 2020 at 12:59 AM Carlos Alexandre <
> carlos.xand...@gmail.com> wrote:
>
>> Hi,
>>
>> The VTL server is connected to TSM via Fiber via a SAN, with the command
>> lsscsi nothing is listed for the vtl server and in /dev there is nothing
>>
>> regards
>>
>> Em quinta-feira, 14 de maio de 2020 15:29:22 UTC-3, quadstor escreveu:
>>>
>>> Hi,
>>>
>>> How is the TSM server connected to the VTL system ? FC or ISCSI ?
>>> On the TSM server please run the following commands
>>> lsscsi >> /tmp/tsm.out
>>> ls -lR /dev/ >> /tmp/tsm.out
>>>
>>> Then send us /tmp/tsm.out and maybe also the /var/log/messages file.
>>>
>>>
>>>
>>> Virtual Tape Library (VTL)
>>> https://www.quadstor.com/virtual-tape-library.html
>>> VTL software download
>>> https://www.quadstor.com/vtl-extended-edition-downloads.html
>>> VTL documentation https://www.quadstor.com/vtl-documentation.html
>>>
>>>
>>> On Thu, May 14, 2020 at 11:50 PM Carlos Alexandre 
>>> wrote:
>>>
 I created a vtl with the drives but it doesn't appear on the TSM server 
 /dev does anyone have a tutorial for this configuration?

 --
 You received this message because you are subscribed to the Google
 Groups "QUADStor VTL" group.
 To unsubscribe from this group and stop receiving emails from it, send
 an email to quadst...@googlegroups.com.
 To view this discussion on the web visit
 https://groups.google.com/d/msgid/quadstor-vtl/3f72829d-e2ef-4d2f-99b6-2f83556a6852%40googlegroups.com
 
 .

>>> --
>> You received this message because you are subscribed to the Google Groups
>> "QUADStor VTL" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to quadstor-vtl+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/quadstor-vtl/d9a75ffa-0644-4659-bfda-e96b522676df%40googlegroups.com
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt6d7960uZeqEj3fL%3Db8%2BKVDsz3CxoFv6kmM95Z-rD_D2w%40mail.gmail.com.

Re: [quadstor-vtl] How configure TSM

2020-05-14 Thread QUADStor VTL Support

You need a reboot after the VTL software install. That is the only way the
VTL fc driver is picked up and replaces the current qla2xxx driver. Please
try a restart and then rescan for devices again on the TSM server side the
VTL device should appear under /dev/

You can use https://www.quadstor.com/vtlnext/fcrescan script on linux to
rescan for FC devices.
Usage on the TSM server as root user
sh fcrescan


On Fri, May 15, 2020 at 12:59 AM Carlos Alexandre 
wrote:

> Hi,
>
> The VTL server is connected to TSM via Fiber via a SAN, with the command
> lsscsi nothing is listed for the vtl server and in /dev there is nothing
>
> regards
>
> Em quinta-feira, 14 de maio de 2020 15:29:22 UTC-3, quadstor escreveu:
>>
>> Hi,
>>
>> How is the TSM server connected to the VTL system ? FC or ISCSI ?
>> On the TSM server please run the following commands
>> lsscsi >> /tmp/tsm.out
>> ls -lR /dev/ >> /tmp/tsm.out
>>
>> Then send us /tmp/tsm.out and maybe also the /var/log/messages file.
>>
>>
>>
>> Virtual Tape Library (VTL)
>> https://www.quadstor.com/virtual-tape-library.html
>> VTL software download
>> https://www.quadstor.com/vtl-extended-edition-downloads.html
>> VTL documentation https://www.quadstor.com/vtl-documentation.html
>>
>>
>> On Thu, May 14, 2020 at 11:50 PM Carlos Alexandre 
>> wrote:
>>
>>> I created a vtl with the drives but it doesn't appear on the TSM server 
>>> /dev does anyone have a tutorial for this configuration?
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "QUADStor VTL" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to quadst...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/quadstor-vtl/3f72829d-e2ef-4d2f-99b6-2f83556a6852%40googlegroups.com
>>> 
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/quadstor-vtl/d9a75ffa-0644-4659-bfda-e96b522676df%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt6fb1VDWUZPk%2B8QxKK9J-C%3DQyhGC59whX-cYoTA%2B%3Dxo9w%40mail.gmail.com.

Re: [quadstor-vtl] How configure TSM

2020-05-14 Thread Carlos Alexandre

Hi,

The VTL server is connected to TSM via Fiber via a SAN, with the command 
lsscsi nothing is listed for the vtl server and in /dev there is nothing

regards

Em quinta-feira, 14 de maio de 2020 15:29:22 UTC-3, quadstor escreveu:
>
> Hi,
>
> How is the TSM server connected to the VTL system ? FC or ISCSI ?
> On the TSM server please run the following commands 
> lsscsi >> /tmp/tsm.out
> ls -lR /dev/ >> /tmp/tsm.out
>
> Then send us /tmp/tsm.out and maybe also the /var/log/messages file.
>
>
>
> Virtual Tape Library (VTL) 
> https://www.quadstor.com/virtual-tape-library.html
> VTL software download 
> https://www.quadstor.com/vtl-extended-edition-downloads.html
> VTL documentation https://www.quadstor.com/vtl-documentation.html
>
>
> On Thu, May 14, 2020 at 11:50 PM Carlos Alexandre  > wrote:
>
>> I created a vtl with the drives but it doesn't appear on the TSM server /dev 
>> does anyone have a tutorial for this configuration?
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "QUADStor VTL" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to quadst...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/quadstor-vtl/3f72829d-e2ef-4d2f-99b6-2f83556a6852%40googlegroups.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/d9a75ffa-0644-4659-bfda-e96b522676df%40googlegroups.com.

Re: [quadstor-vtl] How configure TSM

2020-05-14 Thread QUADStor VTL Support

Hi,

How is the TSM server connected to the VTL system ? FC or ISCSI ?
On the TSM server please run the following commands
lsscsi >> /tmp/tsm.out
ls -lR /dev/ >> /tmp/tsm.out

Then send us /tmp/tsm.out and maybe also the /var/log/messages file.



Virtual Tape Library (VTL)
https://www.quadstor.com/virtual-tape-library.html
VTL software download
https://www.quadstor.com/vtl-extended-edition-downloads.html
VTL documentation https://www.quadstor.com/vtl-documentation.html


On Thu, May 14, 2020 at 11:50 PM Carlos Alexandre 
wrote:

> I created a vtl with the drives but it doesn't appear on the TSM server /dev 
> does anyone have a tutorial for this configuration?
>
> --
> You received this message because you are subscribed to the Google Groups
> "QUADStor VTL" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quadstor-vtl+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/quadstor-vtl/3f72829d-e2ef-4d2f-99b6-2f83556a6852%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"QUADStor VTL" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quadstor-vtl+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quadstor-vtl/CAPEgkt57N53x%3DqK-T-e5me48hq%3DchA1EQAiqnLyHnPBP0YvAzg%40mail.gmail.com.

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

Re: [quadstor-vtl] How configure TSM

11 matches

Site Navigation

Mail list logo

Footer information