[RBW] Re: What draws you to a single speed bike?

[Joe Bernard]

"I am truly curious.  How is it different than just not shifting?  How is 
it more fun?"

Hi Roberta! 

It really isn't different if you can stick with it, but I've tried a 
hundred times and can't do it. If that next higher/lower gear is available 
I'm grabbing it! For me what makes a true singlespeed fun is that 
inability: All I can do is hop on and pedal and if I run out of oomph I get 
off and walk. It's not my thing these days but I still see the appeal, it's 
freeing. 

Joe "I think I walked more that rode my last singlespeed" Bernard

On Sunday, April 18, 2021 at 8:55:54 PM UTC-7 Roberta wrote:

> I am truly curious.  How is it different than just not shifting?  How is 
> it more fun?  When I was looking for a second Riv, Will (at Riv) suggested 
> their single speed (I didn't do it).
>
> I had a 49 lb Raleigh LTD-3 for a few months prior to Riv, which had been 
> converted it to a single speed.   I rode the bike around downtown for 
> errands.  It was tons of fun, but Philadelphia is flat downtown, so SS was 
> OK. I'd be concerned about any hills.
>
> Roberta
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/069c424b-b5c3-4cc8-a81b-6c89ed034facn%40googlegroups.com.

Re: [RBW] What draws you to a single speed bike?

['Eric Norris' via RBW Owners Bunch]

Roberta:

If you’re worried about hills, why not try a three-speed? Sturmey Archer hubs 
come in a 120mm width to fit “fixie” or “single speed” frames, but also easily 
adapt with spacers to fit 126mm (perhaps wider). Set your top gear as your 
“flatland” gear and go down from there. Unless you’re climbing something really 
steep, you can gear down enough to get over most hills.

I rode fixed for years, then switched to Sturmey Archer’s three-speed fixed hub 
(S3X) and them converted that hub (on two different bikes) by replacing the 
splined S-A cog with a one-speed freewheel.

Reminder that Tommy Godwin rode 3- and 4-speed bikes up and down England in 
1939 through two brutal winters and the start of WWII … completing more than 
75,000 miles before the year was out! So yes, long and difficult rides can be 
done on internally geared hubs!

--Eric Norris
campyonly...@me.com
Insta: @CampyOnlyGuy
YouTube: YouTube.com/CampyOnlyGuy 

> On Apr 18, 2021, at 8:55 PM, Roberta  wrote:
> 
> I am truly curious.  How is it different than just not shifting?  How is it 
> more fun?  When I was looking for a second Riv, Will (at Riv) suggested their 
> single speed (I didn't do it).
> 
> I had a 49 lb Raleigh LTD-3 for a few months prior to Riv, which had been 
> converted it to a single speed.   I rode the bike around downtown for 
> errands.  It was tons of fun, but Philadelphia is flat downtown, so SS was 
> OK. I'd be concerned about any hills.
> 
> Roberta
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rbw-owners-bunch+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/fe7a0b4f-f533-4d4c-883e-e1c36b751c57n%40googlegroups.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/23188CB1-0419-49B5-97A2-B499B0BFF20A%40me.com.

[RBW] Re: FS 54cm Saluki Price Question

['Will Horton' via RBW Owners Bunch]

I may be interested in your bike if you still have it.. Would love to see 
some more pics though.

On Sunday, March 28, 2021 at 10:27:14 AM UTC-7 kyleco...@gmail.com wrote:

> I am going to be selling my 54cm Saluki, but I'm wondering how much to 
> ask.  I bought it in 2006-7, serial SA0C54.  It's the cantilever brake 
> version.  It's in excellent condition, pewter silver, pretty standard 
> build, with Paul shifters and Tektro interruptor brake levers. 
>
> Most of the FS "sold" posts on here don't list a price.  There is the 50cm 
> one sold on this list in Jan 2018 for $1,800 and there's the AHH/Saluki 
> currently for sale in North Providence for $2,600.  That's a big range!  
>
> I live in the SF Bay Area.  Any thoughts of fair market value?  I'll try 
> to attach a couple pics.  Thanks for your help!
> Kyle
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/7576db74-3034-4b53-902d-8f3f23633ba3n%40googlegroups.com.

[RBW] What draws you to a single speed bike?

[Roberta]

I am truly curious.  How is it different than just not shifting?  How is it 
more fun?  When I was looking for a second Riv, Will (at Riv) suggested 
their single speed (I didn't do it).

I had a 49 lb Raleigh LTD-3 for a few months prior to Riv, which had been 
converted it to a single speed.   I rode the bike around downtown for 
errands.  It was tons of fun, but Philadelphia is flat downtown, so SS was 
OK. I'd be concerned about any hills.

Roberta

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/fe7a0b4f-f533-4d4c-883e-e1c36b751c57n%40googlegroups.com.

[RBW] Re: WTB/ISO: Nitto Rack Nut & Bolt (daruma)

[Philip Barrett]

I was looking for the same recently, the only place I found them was in 
Japan with the associated shipping costs.

I've bought from these guys before & they are excellent, shipping via DHL 
which is super fast but probably $30+.

https://alexscycle.com/products/nitto-rack-replacement-strut-mounting-stud-bolt?_pos=3&_sid=21321af91&_ss=r



On Sunday, April 18, 2021 at 5:28:05 PM UTC-7 eric...@gmail.com wrote:

> Oof, these are hard to find. Velo Orange, Sim Works and Soma all carry 
> them but all are sold out. 
>
> If there's a hack, I'm all ears. 
>
> On Sunday, April 18, 2021 at 7:34:37 PM UTC-4 Justin Kennedy (Brooklyn, 
> NY) wrote:
>
>> I've somehow stripped one of the daruma bolts of my RBW51 rack. Riv is 
>> sold out of replacement nut/bolt and I can't find anywhere else online to 
>> order one. Anyone have an extra they could part with? Willing to pay $15 
>> plus shipping.
>>
>> Or, is there a hardware store hack?
>>
>> [image: nitto_daruma_02_900_2048x.jpeg][image: 
>> rh1-20184-2_1024x1024.jpeg]
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/919ad6b8-e5ba-4f9a-8f3a-6a397beba281n%40googlegroups.com.

Re: [RBW] Re: Bstone UNO in Newsletter

[rltilley]

He has a really nice High Sierra when you look at his other auctions. The first 
bike I bought for myself was a Sierra in the same “colorway”. Pretty high 
asking price but...

https://sfbay.craigslist.org/eby/bik/d/danville-19-schwinn-high-sierra/7303507852.html

Robert Tilley
San Diego, CA

Sent from my iPhone

> On Apr 18, 2021, at 5:19 PM, Joe Bernard  wrote:
> 
> Oh, I should have thought of this earlier, it's this guy. 
> 
> https://sfbay.craigslist.org/eby/bik/d/danville-cannondale-mtb-bmx-cruiser/7303507825.html
> 
>> On Saturday, April 17, 2021 at 2:11:48 PM UTC-7 Alberto Robador wrote:
>> I've never seen this bike before, very cool! Anyone know this Brandon 
>> fellow? Is it still for sale?
>> 
>>> On Friday, April 16, 2021 at 4:18:40 PM UTC-7 Joe Bernard wrote:
>>> Here's something cool linked in the latest (when I'm writing this) Riv 
>>> email. I owned this bike! I bought it as a frame, no fork, and built it up 
>>> super nice..the end result is what you see in the pics. Rare and fun, but 
>>> utterly useless on the hill I lived on at the time so now this Brandon 
>>> fellow has it. Enjoy a cool old singlespeed! 
>>> 
>>> https://www.rivbike.com/blogs/news/bridgestone-uno
>>> 
>>> Joe "singlespeed writes a check my knees can't cash" Bernard
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/078f7d8a-7c7a-4f0b-a3fa-b8013d9d02b9n%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/422FD044-E188-4189-B6AD-8C698D61CF5E%40gmail.com.

[RBW] Re: FS Bike Bags +

['John Hawrylak' via RBW Owners Bunch]

I am interested in the VO handlebar bag if it is the Camagne one.  Did not 
see photos of it.

Could not reply privately.

John Hawrylak
Woodstown NJ

On Friday, April 16, 2021 at 10:15:41 AM UTC-4 Melanie wrote:

> I love bags, especially bike bags, way too much. But I’m running out of 
> space so sadly, some of them have to go. Prices do not include shipping.
> Photos at 
> https://drive.google.com/drive/folders/1ldb5c6G3GbdGrunbHjIwMoTm8csYiKle?usp=sharing
>
> Sackville Saddle Sack Small - nearly new $110
>
> Sackville Grab Sack - nearly new - $65.00
>
> Carradice Super C Saddlepack - very capacious; small tear near seam on 
> lid  $45
>
> Seat wedge with Klick Fix attachment. Make unknown. Bought from list 
> member, but it didn’t work for me. $15
>
> Velo Orange handlebar bag - $10.00
>
> Small Deuter frame bags - $20/pair
>
> Thanks for looking.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c17f6555-9e91-4003-8fd1-497ae146b59en%40googlegroups.com.

[RBW] Re: WTB/ISO: Nitto Rack Nut & Bolt (daruma)

[Eric Marth]

Oof, these are hard to find. Velo Orange, Sim Works and Soma all carry them 
but all are sold out. 

If there's a hack, I'm all ears. 

On Sunday, April 18, 2021 at 7:34:37 PM UTC-4 Justin Kennedy (Brooklyn, NY) 
wrote:

> I've somehow stripped one of the daruma bolts of my RBW51 rack. Riv is 
> sold out of replacement nut/bolt and I can't find anywhere else online to 
> order one. Anyone have an extra they could part with? Willing to pay $15 
> plus shipping.
>
> Or, is there a hardware store hack?
>
> [image: nitto_daruma_02_900_2048x.jpeg][image: rh1-20184-2_1024x1024.jpeg]
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e8340914-cfbf-488b-a07c-bff158905ddcn%40googlegroups.com.

[RBW] Re: Bstone UNO in Newsletter

[Joe Bernard]

Oh, I should have thought of this earlier, it's this guy. 

https://sfbay.craigslist.org/eby/bik/d/danville-cannondale-mtb-bmx-cruiser/7303507825.html

On Saturday, April 17, 2021 at 2:11:48 PM UTC-7 Alberto Robador wrote:

> I've never seen this bike before, very cool! Anyone know this Brandon 
> fellow? Is it still for sale?
>
> On Friday, April 16, 2021 at 4:18:40 PM UTC-7 Joe Bernard wrote:
>
>> Here's something cool linked in the latest (when I'm writing this) Riv 
>> email. I owned this bike! I bought it as a frame, no fork, and built it up 
>> super nice..the end result is what you see in the pics. Rare and fun, but 
>> utterly useless on the hill I lived on at the time so now this Brandon 
>> fellow has it. Enjoy a cool old singlespeed! 
>>
>> https://www.rivbike.com/blogs/news/bridgestone-uno
>>
>> Joe "singlespeed writes a check my knees can't cash" Bernard
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/078f7d8a-7c7a-4f0b-a3fa-b8013d9d02b9n%40googlegroups.com.

[RBW] WTB/ISO: Nitto Rack Nut & Bolt (daruma)

[Justin Kennedy (Brooklyn, NY)]

I've somehow stripped one of the daruma bolts of my RBW51 rack. Riv is sold 
out of replacement nut/bolt and I can't find anywhere else online to order 
one. Anyone have an extra they could part with? Willing to pay $15 plus 
shipping.

Or, is there a hardware store hack?

[image: nitto_daruma_02_900_2048x.jpeg][image: rh1-20184-2_1024x1024.jpeg]

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f3f03994-ebdf-4501-a160-d00d9caf3bf6n%40googlegroups.com.

[RBW] Re: Billie Bar - stem length & wtb

[Garth]

JS , without being you, all I can say is go long, a 12 or 13. I have a good 
selection of various open face stems so I can try any combo easily. I find 
a combo of a threadless adapter and some cheap threadless 0 degree or 
greater stems great for fitting and or keeping on the bike to ride. That 
said, I'm not a fan of negative rise road stems with a long quill for 
raising handlebars, it's self-defeating.  

"Upright" is such a cliche' though and means nothing more than saying it. 
Unless you're face planted everyone who rides a bike is upright to some 
extent and it's always changing. People have different body types, 
different flexibilities and certainly different sensibilities about 
everything in general. How you're placed over the saddle and your foot 
placement has a big influence on the upper body, so just concentrating on 
the upper with considering everything else is misleading at best. Bike 
riding is a whole body experience, not to mention the "white elephant" in 
the room . which is we are not machines...mechanical.. material.. 
we are to put it blunty  Infinity Itself. 

Riding for joy of Riding Itself. ... Because We Are. 
On Sunday, April 18, 2021 at 8:49:11 AM UTC-4 J Schwartz wrote:

> Greetings
> I'm looking to try a Billie Bar on my App and unsure on stem length. I 
> think I'm leaning towards a slightly more aero position and would like to 
> have the grip/brake area not too far back.  I'd like to set them up so that 
> position is comfortable and upright but not an issue for steering or knee 
> hitting.  The issue is, I'm not all that long and general ride shorter 
> stems .
> * 9cm for Noodles on my S.H.
> * 8cm for flat waive-like bars on my App currently 
>
> I don't think the "3rd" position in the rounded forward part of the bar is 
> something I would use all that often but definitely the area in front of 
> the levers appeals to me as a primary riding position that sort-of mimics 
> riding on the hoods of a drop bar.
>
> Does anyone have suggestions on how long of a stem works best with these 
> bars?   My gut is saying 11cm but I'm concerned about purchasing such a 
> long stem and it feel way too out there.  It's a 55cm App with a roughly 
> 60cm effective top tube length 
>
> Also if anyone has a Bille Bar they would like to move on, please let me 
> know
> Thank you
> JS
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/3f70c3c7-88b8-4aa5-8f79-d080834b112en%40googlegroups.com.

Re: [RBW] Re: Just Pics from Your Good Ride Thread

[Jay Lonner]

Metric century!

Jay Lonner
Bellingham, WA

Sent from my Atari 400

> On Apr 18, 2021, at 12:42 PM, Matthew Williams 
>  wrote:
> 
> Yesterday, I made a second attempt at a century: Berkeley to Sacramento. I 
> left Berkeley at 7:30a and planned to catch the last train from Sacramento at 
> 7p. By 2:30, I was only in Vacaville and I had more than 40 miles to go, so I 
> rode back to the Fairfield station and took Amtrak home.
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/E1A2A381-57D2-4334-9E83-576B54008269%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/622F08D9-78CF-4DE0-B847-4DEDAC258870%40gmail.com.

[RBW] Re: FS: MUSA Long Pants *SOLD

['Norman Bone' via RBW Owners Bunch]

 
 
  On Sat, Apr 17, 2021 at 14:44, Norman Bone wrote:   FS: 
Riv MUSA Long pants. Dark Grey, blue gusset. Brand new. Tags removed but never 
worn. I'm 33 waist and 32 inseam and these fit great.
$75 shipped. Payment with Paypal Friends and Family.

Norman in PDX
  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/1190905105.3600545.1618772900674%40mail.yahoo.com.

Re: [RBW] Sam Hillborne frame size?

[James Warren]

Jim,

Before Riv started offering frames with 6 degree top tube upslope, the top tube 
upslope was roughly 2 degrees. This was the Riv norm from 1994 until whenever 
the Bombadil came along (’07, ’08?, I don’t remember the exact year.) Atlantis 
had 2.5 degrees, AHH had 1.5 degrees, many other models had 2 degrees.

With those 2 degree frames, my ideal size is 64 and 65 cm, and that’s what I 
rode before Bombadil and Hillborne came along with the 6 degree upslope.

Then in 2010, I got a 60 cm Hillborne, I found that I could make that size work 
well for me. When they started offering the frames with more upslope to the top 
tubes, they called it “Expanded Geometry.” It’s ended up being a really good 
thing, because I’m pretty sure it improves the dirt capability.

Enjoy your Hillborne! Amazing frames


> On Apr 17, 2021, at 9:06 PM, Jim McPherson  wrote:
> 
> Thanks. It’s 60cm alright. Cheers
> 
>> On Apr 17, 2021, at 2:19 PM, James Warren  wrote:
>> 
>> 
>> 
>> Center of bottom bracket to top of seat lug
>> 
>> 
>>> On Apr 14, 2021, at 3:32 PM, Finnegan >> > wrote:
>>> 
>>> How can I tell the size of the Sam Hillborne frame? I don't see any size on 
>>> the paint anywhere, the Riv website doesn't have specs for the size I'm 
>>> looking at (60cm--the largest Sam they offer in 2021, apparently). Could be 
>>> a 58 or 57 though, not sure.
>>> 
>>> I tried measuring the top tube length, but from where? Maybe the middle of 
>>> the seat tube to where the top tube connects with the head tube? Or to the 
>>> middle of the head tube too? Or just the length between the tubes? How long 
>>> should it be on the new 60cm frame?
>>> 
>>> Thanks, Riv pros. 
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "RBW Owners Bunch" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to rbw-owners-bunch+unsubscr...@googlegroups.com 
>>> .
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/15881d42-e535-4c43-b98b-a555899471bcn%40googlegroups.com
>>>  
>>> .
>> 
>> 
>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "RBW Owners Bunch" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/rbw-owners-bunch/hPPx9Pm0eYc/unsubscribe 
>> .
>> To unsubscribe from this group and all its topics, send an email to 
>> rbw-owners-bunch+unsubscr...@googlegroups.com 
>> .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/49ADEFAF-94D6-48E9-BC8A-F1CE9499D330%40gmail.com
>>  
>> .
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rbw-owners-bunch+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/rbw-owners-bunch/73974E78-A9D0-4DAA-853A-38B55D30A5D1%40gmail.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/79A969A9-E057-4F5E-B235-354B3A02BC16%40gmail.com.

[RBW] Re: WTB: Paul Touring Cantilever Brakeset - Silver or Polished

[Jeffrey S]

Bump: I found one pair of polished Paul Touring Cantilevers, now I just 
need one more pair. Let me know if you happen to have one!


On Sunday, April 4, 2021 at 10:56:01 PM UTC-7 Jeffrey S wrote:

> I am looking for a set of Paul Touring Cantilever brakes. Silver or 
> Polished. I am located in Portland, OR in case anyone is local. Thanks!
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/bbc9b686-85e3-4824-8c91-f34d1e6b99d1n%40googlegroups.com.

[RBW] Re: WTB Nitto Wire Rear Cable Hanger

[Jeffrey S]

Nevermind! Simworks also has a similar one and my local shop can order.

On Sunday, April 18, 2021 at 9:45:47 AM UTC-7 Jeffrey S wrote:

>
> Hey all! Looking for one of the Nitto wire rear cable hangers 
> 
>  
> that Riv had on their site. They are sold out on there at the moment. Let 
> me know! Thanks
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c1374374-742c-42ab-9b88-ad056ccd265dn%40googlegroups.com.

[RBW] WTB Nitto Wire Rear Cable Hanger

[Jeffrey S]

Hey all! Looking for one of the Nitto wire rear cable hangers 

 
that Riv had on their site. They are sold out on there at the moment. Let 
me know! Thanks

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c0ba3762-c03c-4456-ae5b-59b780338c26n%40googlegroups.com.

Re: [RBW] Re: daily post ur riv

[Nathan F]

Agreed Jason, I never get tired of seeing them. I had no clue there were 
any Sage Hillbornes left, and am glad to see one built up like that. It's 
where I think mine will eventually end up.

For some reason, don't ask me why, to my eye the sage green Sams look 
especially good built up with no fenders and with black knobby tires (like 
above). Riv used to have one built up like that on the landing page of 
their old site. Perhaps thats why I'm so attracted to them? Who knows, but 
they look GOOD!
On Saturday, 17 April 2021 at 14:12:11 UTC-7 domjona...@gmail.com wrote:

> Hey everyone,
>
> Just picked up my new Sam Hillborne, so I thought I’d share! 
>
> Hope everyone is having an awesome Friday! 
>
> [image: 51100360789_38148b7d2c_o.jpg]
>
> On Friday, April 16, 2021 at 9:07:30 PM UTC+9 Fullylugged wrote:
>
>> I have inverted mustache bars on my Ram.  Looks nice and feels good .
>>
>> Sent from my iPad
>>
>> On Apr 15, 2021, at 10:16 PM, brendonoid  wrote:
>>
>> Inverted Billie Bars! Solves the reach problems I had with moustache 
>> bars but still gives me that lovely forward hooks position that makes 
>> moustache bars so great. 
>>
>>
>>
>> On Friday, 16 April 2021 at 10:15:50 UTC+8 David Hays wrote:
>>
>>> Very nice Brendon. What bars are those?
>>> Thanks. 
>>> David
>>>
>>> Sent from my iPhone
>>>
>>> On Apr 15, 2021, at 10:02 PM, brendonoid  wrote:
>>>
>>> 
>>>
>>> I finally got all my parts for my 'Picnic Bike' build and managed to get 
>>> it all together last weekend. Only done a few short test rides and cannot 
>>> wait to ride it all this weekend! So excited!
>>>
>>> 
>>>
>>>
>>> 
>>>
>>>
>>> -- 
>>>
>>> You received this message because you are subscribed to the Google 
>>> Groups "RBW Owners Bunch" group.
>>>
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to rbw-owners-bun...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/rbw-owners-bunch/c274b8dc-104d-42ac-8b12-3fbd84d1e0c5n%40googlegroups.com
>>>  
>>> 
>>> .
>>> 
>>> 
>>>
>>> -- 
>>
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "RBW Owners Bunch" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/rbw-owners-bunch/vUScDWCjWaA/unsubscribe
>> .
>> To unsubscribe from this group and all its topics, send an email to 
>> rbw-owners-bun...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/1edc5708-4603-44b7-b8fa-89875823b775n%40googlegroups.com
>>  
>> 
>> .
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/2b22a8a2-b8b2-4e7a-858a-4b5c2690f9d3n%40googlegroups.com.

[RBW] NEED A FAVOR FROM YOU 

[Roger and Carolyn SKALLERUD]

May I ask a favor.

Do you have an Account with Amazon?

Thanks

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/DM5PR07MB7894317FCD1FC1255262C9659E4A9%40DM5PR07MB7894.namprd07.prod.outlook.com.

[RBW] Re: Just because you want to share pics from your ride

['Joel S' via RBW Owners Bunch]

I saw this one on my last ride. 

On Sunday, April 18, 2021 at 10:18:39 AM UTC-4 Paul in Dallas wrote:

> Some of you might know which model and year this old Ford might be.
>
> I would guess around 1917 give or take a year or two as my wife's family 
> has a Buick that overall looks quite similar.
>
> Paul in Dallas 
> [image: Image] 
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/43612688-2fc6-4416-b8f9-916261a2263en%40googlegroups.com.

[RBW] Billie Bar - stem length & wtb

[J Schwartz]

Greetings
I'm looking to try a Billie Bar on my App and unsure on stem length. I 
think I'm leaning towards a slightly more aero position and would like to 
have the grip/brake area not too far back.  I'd like to set them up so that 
position is comfortable and upright but not an issue for steering or knee 
hitting.  The issue is, I'm not all that long and general ride shorter 
stems .
* 9cm for Noodles on my S.H.
* 8cm for flat waive-like bars on my App currently 

I don't think the "3rd" position in the rounded forward part of the bar is 
something I would use all that often but definitely the area in front of 
the levers appeals to me as a primary riding position that sort-of mimics 
riding on the hoods of a drop bar.

Does anyone have suggestions on how long of a stem works best with these 
bars?   My gut is saying 11cm but I'm concerned about purchasing such a 
long stem and it feel way too out there.  It's a 55cm App with a roughly 
60cm effective top tube length 

Also if anyone has a Bille Bar they would like to move on, please let me 
know
Thank you
JS

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/225e49d2-0550-4583-bddf-623c3a397fd2n%40googlegroups.com.