Re: [RE-wrenches] grundfos SQFlex

[Mac Lewis]

Could you use real slow pulse width modulation to do what you want?  Are
you trying to limit energy, power or volume delivered?  If you've got the
Cu 200, you could put a timer on the float switch contacts that cycle it on
and off.

On Fri, Jul 1, 2016 at 6:14 PM, Maverick Brown 
wrote:

> Jay,
>
> Will a Variac work in this situation?
>
>
> Thank you,
>
> Maverick
>
>
> > On Jun 30, 2016, at 7:43 PM, jay  wrote:
> >
> > Hi All,
> >
> > Any trick methods to keep a SQflex running on AC power at a given flow
> rate that is less than full power?
> >
> > I’ve got a well that is just on 1 gpm, around 150’ lift.
> >
> > the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265
> watts.
> >
> >
> > thx
> >
> > jay
> >
> > peltz power
> > ___
> > List sponsored by Redwood Alliance
> >
> > List Address: RE-wrenches@lists.re-wrenches.org
> >
> > Change listserver email address & settings:
> > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> >
> > List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> >
> > List rules & etiquette:
> > www.re-wrenches.org/etiquette.htm
> >
> > Check out or update participant bios:
> > www.members.re-wrenches.org
> >
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


-- 



Mac Lewis

*"Yo solo sé que no sé nada." -Sócrates*
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] grundfos SQFlex

[Maverick Brown]

Jay,

Will a Variac work in this situation?


Thank you,

Maverick


> On Jun 30, 2016, at 7:43 PM, jay  wrote:
> 
> Hi All,
> 
> Any trick methods to keep a SQflex running on AC power at a given flow rate 
> that is less than full power?
> 
> I’ve got a well that is just on 1 gpm, around 150’ lift.
> 
> the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265 watts.
> 
> 
> thx
> 
> jay
> 
> peltz power
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

[RE-wrenches] Outback AGM cell R

[Jeff Oldham]

Has anyone R a single cell from an Outback AGM 2 cell can? The manual speaks 
to being careful to not let one slide out so that is encouraging, but I'm 
concerned about putting it back in. Do they have any tendency to bulge and make 
it difficult to replace? I have an extremely tight, steep and nearly 
inaccessible existing battery location that is not conducive to battery 
relocation or any reasonable rigging to handle 200# 2) cell cans. I hope a 
fellow Wrench has had to deal as I cannot get any answers from the manu. Thanks 
and have a fun and safe holiday weekend!


>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative 
>SOLutions


Affordable Wireless Plans
Set up is easy. Get online in minutes.
Starting at only $9.95 per month! 
www.netzero.net?refcd=nzmem0216
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] grundfos SQFlex

[Chris Schaefer]

I'd suggest a valve restrictor or perhaps a ball valve that you can adjust
over time till you achieve your correct flow rate while making sure your
well is able to recover.

Christopher

On Thu, Jun 30, 2016 at 8:43 PM, jay  wrote:

> Hi All,
>
> Any trick methods to keep a SQflex running on AC power at a given flow
> rate that is less than full power?
>
> I’ve got a well that is just on 1 gpm, around 150’ lift.
>
> the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265
> watts.
>
>
> thx
>
> jay
>
> peltz power
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


-- 

Chris Schaefer’s


*Tel/Fax 585-229-2083 or Cell 585-748-1870 *
*5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com
 ~ E-mail: ch...@solarandwindfx.com
*


Thomas Jefferson, the author of our great Constitution, once said,
"democracy" will cease to exist when you take away from those who are
willing to work and give to those who would not."
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] grundfos SQFlex

[jerrysgarage01]

Wrenches
Make an artificial head by a valve to reduce flow on the outlet side, it might 
increase watt demand. They will voltage compensate so reducing volts will not 
do it. I have to ask why thats a problem anyway, the pump will turn off if the 
level gets to low anyway.
Jerry


Sent via the Samsung Galaxy S™ III, an AT 4G LTE smartphone

 Original message From: jay 
 Date:06/30/2016  2:43 PM  (GMT-10:00) 
To: RE-wrenches  
Subject: [RE-wrenches] grundfos SQFlex 
Hi All,

Any trick methods to keep a SQflex running on AC power at a given flow rate 
that is less than full power?

I’ve got a well that is just on 1 gpm, around 150’ lift.

the sqflex 3-2 will do it, but at 3gpm with full watts, an amazing 265 watts.


thx

jay

peltz power
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org