Re: [Repeater-Builder] Micor Card needed - TLN1251A
Isn't that card a PL decoder card from a CR? I have a TLN4050SP19 from an EMS station that I made a few jumper changes to make it into the dual-squelch level thingy, controlling it with tones from the 7330. Hit a macro, squelch gets tight. Hit another, it goes to threshold. Scott Zimmerman wrote: They *would* if it was me doing the job. This is for the county's radio system, so I need to do it by the book. I mentioned about using some other modules, but others involved were rather persistent that we use the right cards. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Mark n9...@ameritech.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:26 AM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, I have six of the MICOR Four User Control Module - TLN1685A. Might these work for your application? Each reed has an Enable/Disable switch on the front of the card... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Scott Zimmerman I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott
Re: [Repeater-Builder] Micor Card needed - TLN1251A
wd8chl wrote: Isn't that card a PL decoder card from a CR? I have a TLN4050SP19 from an EMS station that I made a few jumper changes to make it into the dual-squelch level thingy, controlling it with tones from the 7330. Hit a macro, squelch gets tight. Hit another, it goes to threshold. ...and I went back and looked-it does say TLN1251A SP12 on the front-under a big cap...:c\
Re: [Repeater-Builder] Micor Card needed - TLN1251A
Milt; I believe it was to change operation from PL operation to CS operation, not just receive, but 'repeat' also IOW, change it to a carrier-in operated repeater Gary - Original Message - From: Milt To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:16 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A The typical application is to be able to drop RX PL from the console. Not just to check for co-channel users (ie the monitor function which is reset by PTT) but to go to and stay in carrier squelch even when transmitting until commanded back to PL receive. Hypothetical example: The medivac helicoptor (or your neighboring mutual aid department) does currently have the proper PL for your county. Dropping PL receive lets you hear him transmit and you can reply to him. When the incident is over the PL receive is reenabled. Milt N3LTQ - Original Message - From: Scott Zimmerman n3...@repeater-builder.com To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:00 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links Yahoo! Groups Links -- Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.13/2000 - Release Date: 03/13/09 18:00:00
Re: [Repeater-Builder] Micor Card needed - TLN1251A
I suppose that it could be used for that also, I have previously only seen it used in base applications but the card is a 2 state device and could control many things. - Original Message - From: Gary Glaenzer To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 14, 2009 8:03 AM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Milt; I believe it was to change operation from PL operation to CS operation, not just receive, but 'repeat' also IOW, change it to a carrier-in operated repeater Gary - Original Message - From: Milt To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:16 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A The typical application is to be able to drop RX PL from the console. Not just to check for co-channel users (ie the monitor function which is reset by PTT) but to go to and stay in carrier squelch even when transmitting until commanded back to PL receive. Hypothetical example: The medivac helicoptor (or your neighboring mutual aid department) does currently have the proper PL for your county. Dropping PL receive lets you hear him transmit and you can reply to him. When the incident is over the PL receive is reenabled. Milt N3LTQ - Original Message - From: Scott Zimmerman n3...@repeater-builder.com To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:00 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links Yahoo! Groups Links Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.13/2000 - Release Date: 03/13/09 18:00:00
Re: [Repeater-Builder] Micor Card needed - TLN1251A
Correct. This is the application we are planning on using it for. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Milt men...@pa.net To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 14, 2009 12:16 AM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A The typical application is to be able to drop RX PL from the console. Not just to check for co-channel users (ie the monitor function which is reset by PTT) but to go to and stay in carrier squelch even when transmitting until commanded back to PL receive. Hypothetical example: The medivac helicoptor (or your neighboring mutual aid department) does currently have the proper PL for your county. Dropping PL receive lets you hear him transmit and you can reply to him. When the incident is over the PL receive is reenabled. Milt N3LTQ - Original Message - From: Scott Zimmerman n3...@repeater-builder.com To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:00 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links
Re: [Repeater-Builder] Micor Card needed - TLN1251A
it shouldn't be too hard to change freq's om a RPTR SET-UP / KNOCKDOWN card to do this, if you can't find the 'real' one heck, it might be the same card with a different label on the front and some jumper changes on the backplane - Original Message - From: Scott Zimmerman To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 14, 2009 12:21 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Correct. This is the application we are planning on using it for. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Milt men...@pa.net To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 14, 2009 12:16 AM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A The typical application is to be able to drop RX PL from the console. Not just to check for co-channel users (ie the monitor function which is reset by PTT) but to go to and stay in carrier squelch even when transmitting until commanded back to PL receive. Hypothetical example: The medivac helicoptor (or your neighboring mutual aid department) does currently have the proper PL for your county. Dropping PL receive lets you hear him transmit and you can reply to him. When the incident is over the PL receive is reenabled. Milt N3LTQ - Original Message - From: Scott Zimmerman n3...@repeater-builder.com To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:00 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links -- Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.13/2001 - Release Date: 03/14/09 06:54:00
[Repeater-Builder] Micor Card needed - TLN1251A
I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531
RE: [Repeater-Builder] Micor Card needed - TLN1251A
Scott, I have six of the MICOR Four User Control Module - TLN1685A. Might these work for your application? Each reed has an Enable/Disable switch on the front of the card... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Scott Zimmerman I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531
Re: [Repeater-Builder] Micor Card needed - TLN1251A
They *would* if it was me doing the job. This is for the county's radio system, so I need to do it by the book. I mentioned about using some other modules, but others involved were rather persistent that we use the right cards. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Mark n9...@ameritech.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:26 AM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, I have six of the MICOR Four User Control Module - TLN1685A. Might these work for your application? Each reed has an Enable/Disable switch on the front of the card... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Scott Zimmerman I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links
RE: [Repeater-Builder] Micor Card needed - TLN1251A
OK, I understand. But if they change their minds (or you determine the ones you are looking for are NLA) you know where these are. ;-) Mark -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Scott Zimmerman They *would* if it was me doing the job. This is for the county's radio system, so I need to do it by the book. I mentioned about using some other modules, but others involved were rather persistent that we use the right cards. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Mark n9...@ameritech.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:26 AM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, I have six of the MICOR Four User Control Module - TLN1685A. Might these work for your application? Each reed has an Enable/Disable switch on the front of the card... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Scott Zimmerman I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott
RE: [Repeater-Builder] Micor Card needed - TLN1251A
Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531
Re: [Repeater-Builder] Micor Card needed - TLN1251A
Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links
Re: [Repeater-Builder] Micor Card needed - TLN1251A
The typical application is to be able to drop RX PL from the console. Not just to check for co-channel users (ie the monitor function which is reset by PTT) but to go to and stay in carrier squelch even when transmitting until commanded back to PL receive. Hypothetical example: The medivac helicoptor (or your neighboring mutual aid department) does currently have the proper PL for your county. Dropping PL receive lets you hear him transmit and you can reply to him. When the incident is over the PL receive is reenabled. Milt N3LTQ - Original Message - From: Scott Zimmerman n3...@repeater-builder.com To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 11:00 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net To: Repeater-Builder@yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links Yahoo! Groups Links
RE: [Repeater-Builder] Micor Card needed - TLN1251A
For what it's worth, the manual that covers the TLN1251A module is 6881005E01. The title is TLN1249A, TLN1250A, and TLN1251A Decoder Module Options. Unfortunately, it's NLA. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Milt Sent: Friday, March 13, 2009 9:17 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A The typical application is to be able to drop RX PL from the console. Not just to check for co-channel users (ie the monitor function which is reset by PTT) but to go to and stay in carrier squelch even when transmitting until commanded back to PL receive. Hypothetical example: The medivac helicoptor (or your neighboring mutual aid department) does currently have the proper PL for your county. Dropping PL receive lets you hear him transmit and you can reply to him. When the incident is over the PL receive is reenabled. Milt N3LTQ - Original Message - From: Scott Zimmerman n3...@repeater-builder.com mailto:n3xcc%40repeater-builder.com To: Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com Sent: Friday, March 13, 2009 11:00 PM Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A Eric, I'm not sure. I found (1) in my stash that I have collected at hamfests and whatnot over the years. I have no idea what model numbers these would have been found in. Knowing Motorola (and my dumb luck) there weren't very many made. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Eric Lemmon wb6...@verizon.net mailto:wb6fly%40verizon.net To: Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com Sent: Friday, March 13, 2009 9:40 PM Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A Scott, What type of Micor station would use this card? 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com [mailto:Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com ] On Behalf Of Scott Zimmerman Sent: Friday, March 13, 2009 8:18 AM To: motorola-u...@yahoogroups.com mailto:Motorola-User%40yahoogroups.com ; Repeater Builder List Subject: [Repeater-Builder] Micor Card needed - TLN1251A I am in need of a few TLN1251 cards. These are more commonly known as private line control modules. They have 2 momentary switches in the front labeled Operate PL and Operate Carrier Squelch. They have 2 tone decoders on board - 1550 Hz and 1450 Hz. If you or anyone you know has any they don't need, let me know. Thanks, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 Yahoo! Groups Links Yahoo! Groups Links