RE: CSfiltering CS
Yes you could use a coffee filter, but I'd be more concerned about that 'stuff' accumulating on those trodes to a point whereby you can ...knock a little bit of the stuff off N. Subject: CSfiltering CS To: silver-list@eskimo.com From: anthony.aqui...@sasktel.net Date: Thu, 19 May 2011 21:37:42 + After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN’Š[Þ¬¸¬¶+š‡^«^uú+ºgèجrë,Šx¢Yh‰Ö¥J)oz´n•ë�Ò'²ÚîrبžÈm¶Ÿÿà ,Š[Þ®X¬¶ŠàR{.nÇ+‰·¦j)m¢È¥½êåŠËkz«ž²×¬’)¨r‰¬¹¸ÞrÛ§²æìr¸›x ܆+Þ²m§ÿðà šŠV«r¯yÊþÈ¥½êåŠË^²H¦¡Êþf¢–X¬¶f”çßNŠbqجrë,Š‰ì™¨¥¶‹–÷«¡÷í¢˜œ–+-zÉš‡(˜¸¬´ì'z³‘àÞ¾‹«™¨¥¶‰�zú.ë$Šj¢
Re: CSfiltering CS
Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony - Original Message - From: Neville Munn To: silver-list@eskimo.com Sent: Friday, May 20, 2011 4:47 AM Subject: RE: CSfiltering CS Yes you could use a coffee filter, but I'd be more concerned about that 'stuff' accumulating on those trodes to a point whereby you can ...knock a little bit of the stuff off N. Subject: CSfiltering CS To: silver-list@eskimo.com From: anthony.aqui...@sasktel.net Date: Thu, 19 May 2011 21:37:42 + After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN’Š[Þ¬¸¬¶+š‡^«^uú+ºgèجrë,Šx¢Yh‰Ö¥J)oz´n•ë�Ò'²ÚîrبžÈm¶Ÿÿà ,Š[Þ®X¬¶ŠàR{.nÇ+‰·¦j)m¢È¥½êåŠËkz«ž²×¬’)¨r‰¬¹¸ÞrÛ§²æìr¸›x ܆+Þ²m§ÿðà šŠV«r¯yÊþÈ¥½êåŠË^²H¦¡Êþf¢–X¬¶f”çßNŠbqجrë,Š‰ì™¨¥¶‹–÷«¡÷í¢˜œ–+-zÉš‡(˜¸¬´ì'z³‘àÞ¾‹«™¨¥¶‰�zú.ë$Šj¢ __ Information from ESET NOD32 Antivirus, version of virus signature database 6137 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 6138 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
Re: CSfiltering CS
What are you using to make your EIS? I use a puppy and have it alternate polarities. This greatly minimizes any build-up. And the wee bit that it does still create I just let settle into the bottom of the jar. I use those types of dregs for making up my hand soap and things like that where such stuff doesn't matter as it is mostly an ascetics issue. Jaxi On Fri, May 20, 2011 at 9:35 AM, Anthony Cullingworth anthony.aqui...@sasktel.net wrote: Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony - Original Message - *From:* Neville Munn one.red...@hotmail.com *To:* silver-list@eskimo.com *Sent:* Friday, May 20, 2011 4:47 AM *Subject:* RE: CSfiltering CS Yes you could use a coffee filter, but I'd be more concerned about that 'stuff' accumulating on those trodes to a point whereby you can ...knock a little bit of the stuff off N. Subject: CSfiltering CS To: silver-list@eskimo.com From: anthony.aqui...@sasktel.net Date: Thu, 19 May 2011 21:37:42 + After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN ’Š[Þ¬¸¬¶+ š‡^«^uú+ºgèجrë,Šx ¢Yh‰Ö¥J)oz´n•ë Ò'²ÚîrبžÈm¶Ÿÿà ,Š[Þ®X¬¶ŠàR{.nÇ+‰·¦j)m¢È¥½êåŠËkz«ž²×¬’)¨r‰¬¹¸ÞrÛ§²æìr¸›x ܆+Þ² m§ÿðà šŠV«r ¯yÊþÈ¥½êåŠË^²H¦¡Êþf¢–X¬¶ f”çßNŠbqجrë,Š‰ì™¨¥¶‹–÷«¡÷í¢˜œ–+-zÉš‡(˜¸¬´ì'z³‘àÞ¾‹«™¨¥¶‰ zú.ë$Šj ¢ __ Information from ESET NOD32 Antivirus, version of virus signature database 6137 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
Re: CSfiltering CS
I am using a SilverGen SG6. From: jaxi To: silver-list@eskimo.com Sent: Friday, May 20, 2011 8:40 AM Subject: Re: CSfiltering CS What are you using to make your EIS? I use a puppy and have it alternate polarities. This greatly minimizes any build-up. And the wee bit that it does still create I just let settle into the bottom of the jar. I use those types of dregs for making up my hand soap and things like that where such stuff doesn't matter as it is mostly an ascetics issue. Jaxi On Fri, May 20, 2011 at 9:35 AM, Anthony Cullingworth anthony.aqui...@sasktel.net wrote: Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony - Original Message - From: Neville Munn To: silver-list@eskimo.com Sent: Friday, May 20, 2011 4:47 AM Subject: RE: CSfiltering CS Yes you could use a coffee filter, but I'd be more concerned about that 'stuff' accumulating on those trodes to a point whereby you can ...knock a little bit of the stuff off N. Subject: CSfiltering CS To: silver-list@eskimo.com From: anthony.aqui...@sasktel.net Date: Thu, 19 May 2011 21:37:42 + After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN ’Š[Þ¬¸¬¶+ š‡^«^uú+ºgèجrë,Šx ¢Yh‰Ö¥J)oz´n•ë Ò'²ÚîrبžÈm¶Ÿÿà ,Š[Þ®X¬¶ŠàR{.nÇ+‰·¦j)m¢È¥½êåŠËkz«ž²×¬’)¨r‰¬¹¸ÞrÛ§²æìr¸›x ܆+Þ² m§ÿðà šŠV«r ¯yÊþÈ¥½êåŠË^²H¦¡Êþf¢–X¬¶ f”çßNŠbqجrë,Š‰ì™¨¥¶‹–÷«¡÷í¢˜œ–+-zÉš‡(˜¸¬´ì'z³‘àÞ¾‹«™¨¥¶‰ zú.ë$Šj ¢ __ Information from ESET NOD32 Antivirus, version of virus signature database 6137 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 6138 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
Re: CSfiltering CS
I don't have that but you have the option of polarity switching with it don't you? On Fri, May 20, 2011 at 10:10 AM, Anthony Cullingworth anthony.aqui...@sasktel.net wrote: I am using a SilverGen SG6. *From:* jaxi jaxi.sch...@gmail.com *To:* silver-list@eskimo.com *Sent:* Friday, May 20, 2011 8:40 AM *Subject:* Re: CSfiltering CS What are you using to make your EIS? I use a puppy and have it alternate polarities. This greatly minimizes any build-up. And the wee bit that it does still create I just let settle into the bottom of the jar. I use those types of dregs for making up my hand soap and things like that where such stuff doesn't matter as it is mostly an ascetics issue. Jaxi On Fri, May 20, 2011 at 9:35 AM, Anthony Cullingworth anthony.aqui...@sasktel.net wrote: Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony - Original Message - *From:* Neville Munn one.red...@hotmail.com *To:* silver-list@eskimo.com *Sent:* Friday, May 20, 2011 4:47 AM *Subject:* RE: CSfiltering CS Yes you could use a coffee filter, but I'd be more concerned about that 'stuff' accumulating on those trodes to a point whereby you can ...knock a little bit of the stuff off N. Subject: CSfiltering CS To: silver-list@eskimo.com From: anthony.aqui...@sasktel.net Date: Thu, 19 May 2011 21:37:42 + After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN ’Š[Þ¬¸¬¶+ š‡^«^uú+ºgèجrë,Šx ¢Yh‰Ö¥J)oz´n•ë Ò'²ÚîrبžÈm¶Ÿÿà ,Š[Þ®X¬¶ŠàR{.nÇ+‰·¦j)m¢È¥½êåŠËkz«ž²×¬’)¨r‰¬¹¸ÞrÛ§²æìr¸›x ܆+Þ² m§ÿðà šŠV«r ¯yÊþÈ¥½êåŠË^²H¦¡Êþf¢–X¬¶ f”çßNŠbqجrë,Š‰ì™¨¥¶‹–÷«¡÷í¢˜œ–+-zÉš‡(˜¸¬´ì'z³‘àÞ¾‹«™¨¥¶‰ zú.ë$Šj ¢ __ Information from ESET NOD32 Antivirus, version of virus signature database 6137 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 6138 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
RE: CSfiltering CS
Well, each to their own I spose, but suffice to say I never want to see any 'stuff' build up on my electrodes. No big deal necessarily I guess, just something I never want to see on my setup, which is why I clean my trodes at regular timed intervals, if they need it or not. I don't have polarity reversal on my gear, I just swap the trodes over as I clean them. Nothing detrimental either, you can filter it as you say, or leave it behind in the container. If you've got another use for that residue that's fine, but if not, you got residue in the container serving no useful purpose. I don't have a use for it personally, and I don't see a need to find a use for it, so I choose not to create any 'debris'. N. Date: Fri, 20 May 2011 08:35:49 -0600 From: anthony.aqui...@sasktel.net Subject: Re: CSfiltering CS To: silver-list@eskimo.com Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony
Re: CSfiltering CS
My Silver Puppy shuts off automatically when the water has become CS but I've noticed that it shuts off much sooner if I've put the electrodes in when they're darkened. Now, I wipe them down after I take them out, just rub them clean with a paper towel, so they're ready for the next time. Be well, Léna On May 20, 2011, at 10:35 AM, Anthony Cullingworth wrote: Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony - Original Message - From: Neville Munn To: silver-list@eskimo.com Sent: Friday, May 20, 2011 4:47 AM Subject: RE: CSfiltering CS Yes you could use a coffee filter, but I'd be more concerned about that 'stuff' accumulating on those trodes to a point whereby you can ...knock a little bit of the stuff off N. Subject: CSfiltering CS To: silver-list@eskimo.com From: anthony.aqui...@sasktel.net Date: Thu, 19 May 2011 21:37:42 + After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN‚…[fi¬¸¬¶ +˚Ω^ «^uú+ºgè جrë,…x¢Yh≈Ö¥J)oz ´nëˇÒ'”ÚîrبıÈm¶ƒÿà ,…[fi®X¬¶…àR{.nÇ +≈·œj)m¢È¥∏êå…Ëkz«ı”◊¬‚)¨r≈¬’¸fir €§”æìr¸˝x Ü∫+fi”m§ÿ›Ã ˚…V«r¯yÊflÈ¥∏êå… Ë^”Hœ¡Êflf¢ˆX¬¶f‰çßN…bqجrë,…≈ì˙¨¥¶ —ˆ÷«¡÷í¢˘˛ˆ+-zÉ˚Ω(˘¸¬´ì'z“Œàfi≤—«˙¨ ¥¶≈ˇzú. ë$…j¢ __ Information from ESET NOD32 Antivirus, version of virus signature database 6137 (20110520) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
RE: CSfiltering CS vs polarity switching
I got tired of manually cleaning and swapping my CS generator electrodes. So I converted my homemade generator to electrically swap polarity to the electrodes about every 15 minutes. I kept the same run time of 24 hours, but I had to increase the constant current from about 0.2 ma to 0.3 ma to end up with the same strength brew. Now I NEVER need to clean or swap the electrodes. And no stuff sluffs off into the brew, so there is no need to filter or carefully decant. I highly recommend automatic polarity switching of current to CS generator electrodes. Steve Y. _ From: Neville Munn [mailto:one.red...@hotmail.com] Sent: Friday, May 20, 2011 9:26 AM To: silver-list@eskimo.com Subject: RE: CSfiltering CS Well, each to their own I spose, but suffice to say I never want to see any 'stuff' build up on my electrodes. No big deal necessarily I guess, just something I never want to see on my setup, which is why I clean my trodes at regular timed intervals, if they need it or not. I don't have polarity reversal on my gear, I just swap the trodes over as I clean them. Nothing detrimental either, you can filter it as you say, or leave it behind in the container. If you've got another use for that residue that's fine, but if not, you got residue in the container serving no useful purpose. I don't have a use for it personally, and I don't see a need to find a use for it, so I choose not to create any 'debris'. N. _ Date: Fri, 20 May 2011 08:35:49 -0600 From: anthony.aqui...@sasktel.net Subject: Re: CSfiltering CS To: silver-list@eskimo.com Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus Database: 1509/3649 - Release Date: 05/20/11
Re: CSfiltering CS vs polarity switching
is this something myself (an electrical illiterate) could do to a prepackaged unit (SilverGen SG6)? Sent from my BlackBerry® wireless handheld -Original Message- From: SJY you...@relia.net Date: Fri, 20 May 2011 15:05:52 To: silver-list@eskimo.com Reply-to: silver-list@eskimo.com Subject: RE: CSfiltering CS vs polarity switching I got tired of manually cleaning and swapping my CS generator electrodes. So I converted my homemade generator to electrically swap polarity to the electrodes about every 15 minutes. I kept the same run time of 24 hours, but I had to increase the constant current from about 0.2 ma to 0.3 ma to end up with the same strength brew. Now I NEVER need to clean or swap the electrodes. And no stuff sluffs off into the brew, so there is no need to filter or carefully decant. I highly recommend automatic polarity switching of current to CS generator electrodes. Steve Y. _ From: Neville Munn [mailto:one.red...@hotmail.com] Sent: Friday, May 20, 2011 9:26 AM To: silver-list@eskimo.com Subject: RE: CSfiltering CS Well, each to their own I spose, but suffice to say I never want to see any 'stuff' build up on my electrodes. No big deal necessarily I guess, just something I never want to see on my setup, which is why I clean my trodes at regular timed intervals, if they need it or not. I don't have polarity reversal on my gear, I just swap the trodes over as I clean them. Nothing detrimental either, you can filter it as you say, or leave it behind in the container. If you've got another use for that residue that's fine, but if not, you got residue in the container serving no useful purpose. I don't have a use for it personally, and I don't see a need to find a use for it, so I choose not to create any 'debris'. N. _ Date: Fri, 20 May 2011 08:35:49 -0600 From: anthony.aqui...@sasktel.net Subject: Re: CSfiltering CS To: silver-list@eskimo.com Should I be cleaning the trodes during the brewing process? Besides knocking the stuff off and creating debris in my CS is there any other detrimental effects of having that stuff build up during a brew? Anthony _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus Database: 1509/3649 - Release Date: 05/20/11
CSfiltering CS
After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheldN’Š[Þ¬¸¬¶+š‡^«^uú+ºgèجrë,Šx¢Yh‰Ö¥J)oz´n•ë�Ò'²ÚîrبžÈm¶Ÿÿà ,Š[Þ®X¬¶ŠàR{.nÇ+‰·¦j)m¢È¥½êåŠËkz«ž²×¬’)¨r‰¬¹¸Þr
Re: CSfiltering CS
I use a coffee filter to decant into a bottle from the *maker* jar, pouring thru the filter. Shouldn't degrade your CS. Smitty On Thu, May 19, 2011 at 11:37 AM, anthony.aqui...@sasktel.net wrote: After making my CS I sometimes knock a little bit of the stuff off that builds up on the trodes. It falls into the CS and kid of just clumps in little balls. Can I use a coffee filter to strain these little bits out or will that degrade the product in anyway? I am talking about a paper coffee filter. Sent from my BlackBerry® wireless handheld
CSFiltering CS
Hello, I have just finished my first batch of CS. How long should i wait before filtering and use? Filter anytime (or don't even bother), use anytime. __ Find your next car at http://autos.yahoo.ca -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
I don't think that stuff really matters. The best way to remove it is to let it settle and decant. Ode At 09:48 AM 7/18/2004 -0700, you wrote: I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com>http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
CSFiltering CS
Hi Steve, You're correct about the surface particles. They are probably only one atom thick and are floating because of surface tension. When I see them I'm reminded of an oil sheen. One drop of oil can cover a large surface and make one think it's more than it really is. I have found that if one just pours off (decants) into another container the surface floaters just disappear. Anyway there's nothing to worry about since it's all silver and not a contaminant and the quantity is so infinitesimal it's not worth bothering with. The worst filters are Whatman. It must be because of the extra chemical processing to make them low ash and ultra pure. Anyway, they really cause yellowing. My recommendation is NEVER filter. Decanting is the best method. Best regards, Trem - Original Message - From: SJY youngst...@konnections.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 8:44 PM Subject: [trem] Re: CSFiltering CS Terry, Just let the particulates settle to the bottom - you might have to first stir to break surface tension if they are floating on the surface. Then just carefully decant off the clear liquid and dump out the liquid solid stuff at the bottom. Filtering often adds more stuff then it takes out unless you have very good filter media (coffee filters seem to introduce chemicals into your brew - recommend not using them). --Steve Y. - Original Message - From: Terry slickpic...@cox.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 10:48 AM Subject: CSFiltering CS I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
You might use an Ice tea gallon jar to brew with and use the spigot on the side to decant off what you use. That way you don't have to worry about the contamination you can get from the coffee filters. Dave Terry wrote: I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
RE: CSFiltering CS
What about unbleached coffee filters (brown) I have been using them for years. Bob -Original Message- From: silver-list-requ...@eskimo.com [mailto:silver-list-requ...@eskimo.com] On Behalf Of Trem Sent: Monday, July 19, 2004 10:31 AM To: silver-list@eskimo.com Subject: CSFiltering CS Hi Steve, You're correct about the surface particles. They are probably only one atom thick and are floating because of surface tension. When I see them I'm reminded of an oil sheen. One drop of oil can cover a large surface and make one think it's more than it really is. I have found that if one just pours off (decants) into another container the surface floaters just disappear. Anyway there's nothing to worry about since it's all silver and not a contaminant and the quantity is so infinitesimal it's not worth bothering with. The worst filters are Whatman. It must be because of the extra chemical processing to make them low ash and ultra pure. Anyway, they really cause yellowing. My recommendation is NEVER filter. Decanting is the best method. Best regards, Trem - Original Message - From: SJY youngst...@konnections.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 8:44 PM Subject: [trem] Re: CSFiltering CS Terry, Just let the particulates settle to the bottom - you might have to first stir to break surface tension if they are floating on the surface. Then just carefully decant off the clear liquid and dump out the liquid solid stuff at the bottom. Filtering often adds more stuff then it takes out unless you have very good filter media (coffee filters seem to introduce chemicals into your brew - recommend not using them). --Steve Y. - Original Message - From: Terry slickpic...@cox.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 10:48 AM Subject: CSFiltering CS I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
RE: CSFiltering CS
Trem: Thanks for the information. The particles I see are not floaters, but are at (or near) the bottom. Therefore decanting should work. I gather though, that even if a few of the particles are in my decanted fluid, they're not harmful? Terry -Original Message- From: Trem [mailto:t...@silvergen.com] Sent: Monday, July 19, 2004 7:31 AM To: silver-list@eskimo.com Subject: CSFiltering CS Hi Steve, You're correct about the surface particles. They are probably only one atom thick and are floating because of surface tension. When I see them I'm reminded of an oil sheen. One drop of oil can cover a large surface and make one think it's more than it really is. I have found that if one just pours off (decants) into another container the surface floaters just disappear. Anyway there's nothing to worry about since it's all silver and not a contaminant and the quantity is so infinitesimal it's not worth bothering with. The worst filters are Whatman. It must be because of the extra chemical processing to make them low ash and ultra pure. Anyway, they really cause yellowing. My recommendation is NEVER filter. Decanting is the best method. Best regards, Trem - Original Message - From: SJY youngst...@konnections.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 8:44 PM Subject: [trem] Re: CSFiltering CS Terry, Just let the particulates settle to the bottom - you might have to first stir to break surface tension if they are floating on the surface. Then just carefully decant off the clear liquid and dump out the liquid solid stuff at the bottom. Filtering often adds more stuff then it takes out unless you have very good filter media (coffee filters seem to introduce chemicals into your brew - recommend not using them). --Steve Y. - Original Message - From: Terry slickpic...@cox.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 10:48 AM Subject: CSFiltering CS I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004
CSFiltering CS
Hi Terry, Exactly. It's silver and distilled water in the vessel. I wouldn't have any qualms about ingesting a small quantity of silver oxide or silver ?. I wouldn't drink the dregs for long periods of time but an occasional particle is not a worry to me. Decanting always leaves any dregs behind. Floaters are definitely a small amount. Just looks like more since they are so thin. I see them in almost every batch I make with the SG7 and when I drain the CS into another container through the spigot they're never seen again in the storage bottles. Trem - Original Message - From: Terry slickpic...@cox.net To: silver-list@eskimo.com Sent: Monday, July 19, 2004 10:04 AM Subject: [trem] RE: CSFiltering CS Trem: Thanks for the information. The particles I see are not floaters, but are at (or near) the bottom. Therefore decanting should work. I gather though, that even if a few of the particles are in my decanted fluid, they're not harmful? Terry -Original Message- From: Trem [mailto:t...@silvergen.com] Sent: Monday, July 19, 2004 7:31 AM To: silver-list@eskimo.com Subject: CSFiltering CS Hi Steve, You're correct about the surface particles. They are probably only one atom thick and are floating because of surface tension. When I see them I'm reminded of an oil sheen. One drop of oil can cover a large surface and make one think it's more than it really is. I have found that if one just pours off (decants) into another container the surface floaters just disappear. Anyway there's nothing to worry about since it's all silver and not a contaminant and the quantity is so infinitesimal it's not worth bothering with. The worst filters are Whatman. It must be because of the extra chemical processing to make them low ash and ultra pure. Anyway, they really cause yellowing. My recommendation is NEVER filter. Decanting is the best method. Best regards, Trem - Original Message - From: SJY youngst...@konnections.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 8:44 PM Subject: [trem] Re: CSFiltering CS Terry, Just let the particulates settle to the bottom - you might have to first stir to break surface tension if they are floating on the surface. Then just carefully decant off the clear liquid and dump out the liquid solid stuff at the bottom. Filtering often adds more stuff then it takes out unless you have very good filter media (coffee filters seem to introduce chemicals into your brew - recommend not using them). --Steve Y. - Original Message - From: Terry slickpic...@cox.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 10:48 AM Subject: CSFiltering CS I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004
CSFiltering CS
I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004
Re: CSFiltering CS
Check your set up and procedure. I never get these under the 1 o'clock setting when I am careful about contamination. Don't touch the electrodes with your bare hands. Be careful about what you spray or use as cleaning products in the same room. Rinse the container three times with distilled water after cleaning. I use the same glass jar without cleaning for many batches with no floaties or particles. I wipe the electrode with Kleenex between batches. I make two quarts at a time in a canning jar. Only when I have gone past the 1 o'clock position on the dial have I had any floaters or sinkers in the solution. But yes you should filter them out with a coffee filter, or let them settle and pour off the liquid without distrubing the sediment. Trem may also have some suggestions. I made quite a few batches like that initially. Just had to learn good procedures as I keep my generator on the kitchen counter -- mainly to not use ANY cleaning product near it, and to always rinse a jar 3 times with distilled water after cleaning or using even well water to rinse. Garnet On Sun, 2004-07-18 at 11:48, Terry wrote: I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
RE: CSFiltering CS
Ironically my procedure is almost exactly the same as yours (including using the same glass jar w/out cleaning for many batches), except that I have only been rinsing twice w/distilled water. I don't get floaties every time below 1 o'clock, but when I do it's probably because of that (and/or inadvertently touching an electrode without realizing it). I am careful about what cleaning products I use in the area (since mine's on the kitchen counter, too). Thanks much for the information. Terry -Original Message- From: Garnet [mailto:garnetri...@earthlink.net] Sent: Sunday, July 18, 2004 4:11 PM To: Silver List Subject: Re: CSFiltering CS Check your set up and procedure. I never get these under the 1 o'clock setting when I am careful about contamination. Don't touch the electrodes with your bare hands. Be careful about what you spray or use as cleaning products in the same room. Rinse the container three times with distilled water after cleaning. I use the same glass jar without cleaning for many batches with no floaties or particles. I wipe the electrode with Kleenex between batches. I make two quarts at a time in a canning jar. Only when I have gone past the 1 o'clock position on the dial have I had any floaters or sinkers in the solution. But yes you should filter them out with a coffee filter, or let them settle and pour off the liquid without distrubing the sediment. Trem may also have some suggestions. I made quite a few batches like that initially. Just had to learn good procedures as I keep my generator on the kitchen counter -- mainly to not use ANY cleaning product near it, and to always rinse a jar 3 times with distilled water after cleaning or using even well water to rinse. Garnet On Sun, 2004-07-18 at 11:48, Terry wrote: I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004
Re: CSFiltering CS
Terry, Just let the particulates settle to the bottom - you might have to first stir to break surface tension if they are floating on the surface. Then just carefully decant off the clear liquid and dump out the liquid solid stuff at the bottom. Filtering often adds more stuff then it takes out unless you have very good filter media (coffee filters seem to introduce chemicals into your brew - recommend not using them). --Steve Y. - Original Message - From: Terry slickpic...@cox.net To: silver-list@eskimo.com Sent: Sunday, July 18, 2004 10:48 AM Subject: CSFiltering CS I would like to clarify an issue I read about here before I got a CS generator, but can't recall the consensus. Now that I'm making my own CS (Silvergen SG6), if I get above about halfway on the setting (roughly 5 ppm), I get gray particulates floating in the otherwise clear liquid (sometimes I even get a few at 5 ppm). Should I filter these out (via a coffee filter or some other type of filter), or is it okay to leave these in the CS and consume them? Thanks, Terry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.721 / Virus Database: 477 - Release Date: 7/16/2004 -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
please unsubscribeyour service from your list, wyatt hawkins w4...@juno.com On Wed, 9 Jan 2002 07:53:44 -0700 Marshalee Hallett liah...@utah-inter.net writes: Some folks think the silver oxide particles that form are a problem in some way. Well, I`ve never filtered my CS, and in 6 years, no problems. I don`t heat, or stir, the water either, I`m too lazy...It still works! Marshalee I've noticed that several people talk about filtering the completed CS after the brewing is completed. What is it that we need to filter out? What is it that settles to the bottom? Thanks, Roger Ragain Cahokia, Illinois United States of America E-mail: rrag...@juno.com -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
Some folks think the silver oxide particles that form are a problem in some way. Well, I`ve never filtered my CS, and in 6 years, no problems. I don`t heat, or stir, the water either, I`m too lazy...It still works! Marshalee I've noticed that several people talk about filtering the completed CS after the brewing is completed. What is it that we need to filter out? What is it that settles to the bottom? Thanks, Roger Ragain Cahokia, Illinois United States of America E-mail: rrag...@juno.com -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
Hi, i have a rust color build-up on the glass is use to make cs, if i do not wash it between batches. i made about 11/2 gal. in the last two days, one glass at a time. At the end of each day i easily cleaned the glass with dish detergent and warm soapy water. i too, want to know more about this substance. Thank you, nan Carol wrote: I get the same rust colored stains on a measuring cup that I use. After I have finished brewing my CS I strain it using a coffee filter. The container I pour it into has a chip in the glass (this is the measuring cup) and I have noticed a rust coloration forming in the uneven surface of the chip. I am also getting this rust coloration on an eye dropper I use to snort CS with when I get a sinus infection. This is the same rust color that my used coffee filter/strainer gets if I leave laying out for a day or so. I don't know what is causing this but it has something to do with the CS. -Original Message- From: Josephine [mailto:joseph...@poidogs.com] Sent: Saturday, December 29, 2001 11:08 AM To: silver-list@eskimo.com Subject: Re: CSFiltering CS Talking about filtering CS, I bought the unbleached coffee filters, the Melitta brand. When I used them to filter my CS, the CS got darker yellow in color. This happened several times so I stopped using those coffee filters as I then figured that the filters are not really unbleached but maybe colored brown to look unbleached and perhaps the coloring is leaching into the CS. It was then suggested by the manufacturer of my CS generator that I could use white cotton handkerchiefs to filter the CS. So now I am using cotton hankies. However, I am noticing that whenever I rinse out the hankies and hang them to dry, I notice a rust colored stain develops on the part that was in contact with the CS. Now I am wondering where this rust color is originating from. The manufacturer has no explanation for the rust color and says that the silver strips being used for the electrodes are 99.9 silver. Any way of testing the electrodes for purity? Also, I am beginning to wonder if the rust is coming from the metal covers that I am using for the quart size mason jars that I use to make and store the CS. Any ideas or comments on this subject is appreciated. Thanks, Josephine . Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). . __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
Yours could be the fact that you wash your glass. Do not use detergents to clean the containerjust rinse with DW. I do not even do that!! Occassionally I will wipe out with a clean paper towel. Just keep reusing. Remeber you are making CS.nothing grows in the presence of silverwhy worry about cleaning the making container? From: nan n...@wingnet.net Reply-To: nan n...@wingnet.net Date: Mon, 31 Dec 2001 12:31:27 -0500 To: silver-list@eskimo.com Subject: Re: CSFiltering CS Resent-From: silver-list@eskimo.com Resent-Date: Mon, 31 Dec 2001 09:37:56 -0800 Hi, i have a rust color build-up on the glass is use to make cs, if i do not wash it between batches. i made about 11/2 gal. in the last two days, one glass at a time. At the end of each day i easily cleaned the glass with dish detergent and warm soapy water. i too, want to know more about this substance. Thank you, nan Carol wrote: I get the same rust colored stains on a measuring cup that I use. After I have finished brewing my CS I strain it using a coffee filter. The container I pour it into has a chip in the glass (this is the measuring cup) and I have noticed a rust coloration forming in the uneven surface of the chip. I am also getting this rust coloration on an eye dropper I use to snort CS with when I get a sinus infection. This is the same rust color that my used coffee filter/strainer gets if I leave laying out for a day or so. I don't know what is causing this but it has something to do with the CS. -Original Message- From: Josephine [mailto:joseph...@poidogs.com] Sent: Saturday, December 29, 2001 11:08 AM To: silver-list@eskimo.com Subject: Re: CSFiltering CS Talking about filtering CS, I bought the unbleached coffee filters, the Melitta brand. When I used them to filter my CS, the CS got darker yellow in color. This happened several times so I stopped using those coffee filters as I then figured that the filters are not really unbleached but maybe colored brown to look unbleached and perhaps the coloring is leaching into the CS. It was then suggested by the manufacturer of my CS generator that I could use white cotton handkerchiefs to filter the CS. So now I am using cotton hankies. However, I am noticing that whenever I rinse out the hankies and hang them to dry, I notice a rust colored stain develops on the part that was in contact with the CS. Now I am wondering where this rust color is originating from. The manufacturer has no explanation for the rust color and says that the silver strips being used for the electrodes are 99.9 silver. Any way of testing the electrodes for purity? Also, I am beginning to wonder if the rust is coming from the metal covers that I am using for the quart size mason jars that I use to make and store the CS. Any ideas or comments on this subject is appreciated. Thanks, Josephine . Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). . __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
RE: CSFiltering CS
I get the same rust colored stains on a measuring cup that I use. After I have finished brewing my CS I strain it using a coffee filter. The container I pour it into has a chip in the glass (this is the measuring cup) and I have noticed a rust coloration forming in the uneven surface of the chip. I am also getting this rust coloration on an eye dropper I use to snort CS with when I get a sinus infection. This is the same rust color that my used coffee filter/strainer gets if I leave laying out for a day or so. I don't know what is causing this but it has something to do with the CS. -Original Message- From: Josephine [mailto:joseph...@poidogs.com] Sent: Saturday, December 29, 2001 11:08 AM To: silver-list@eskimo.com Subject: Re: CSFiltering CS Talking about filtering CS, I bought the unbleached coffee filters, the Melitta brand. When I used them to filter my CS, the CS got darker yellow in color. This happened several times so I stopped using those coffee filters as I then figured that the filters are not really unbleached but maybe colored brown to look unbleached and perhaps the coloring is leaching into the CS. It was then suggested by the manufacturer of my CS generator that I could use white cotton handkerchiefs to filter the CS. So now I am using cotton hankies. However, I am noticing that whenever I rinse out the hankies and hang them to dry, I notice a rust colored stain develops on the part that was in contact with the CS. Now I am wondering where this rust color is originating from. The manufacturer has no explanation for the rust color and says that the silver strips being used for the electrodes are 99.9 silver. Any way of testing the electrodes for purity? Also, I am beginning to wonder if the rust is coming from the metal covers that I am using for the quart size mason jars that I use to make and store the CS. Any ideas or comments on this subject is appreciated. Thanks, Josephine . Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). . __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
maybe the rust colored material is really rust and maybe the silver rods are part silver and part iron? Josephine So what is the rust coloured material. Is the process going too fast? Thanks for your help. This list is wonderful. Leo Kent and Carol wrote: I get the same rust colored stains on a measuring cup that I use. -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
When I use 4-9v batteries with rods 1-1/2 apart, I immediately get rust coloured cloudy material coming off the negative wire and rising to the surface. When I go to 3 batteries, it stops, and I see no cloud at all, not even a milky white. I use distilled water with a starter batch of CS in it. So what is the rust coloured material. Is the process going too fast? Thanks for your help. This list is wonderful. Leo Kent and Carol wrote: I get the same rust colored stains on a measuring cup that I use. After I have finished brewing my CS I strain it using a coffee filter. The container I pour it into has a chip in the glass (this is the measuring cup) and I have noticed a rust coloration forming in the uneven surface of the chip. I am also getting this rust coloration on an eye dropper I use to snort CS with when I get a sinus infection. This is the same rust color that my used coffee filter/strainer gets if I leave laying out for a day or so. I don't know what is causing this but it has something to do with the CS. -Original Message- From: Josephine [mailto:joseph...@poidogs.com] Sent: Saturday, December 29, 2001 11:08 AM To: silver-list@eskimo.com Subject: Re: CSFiltering CS Talking about filtering CS, I bought the unbleached coffee filters, the Melitta brand. When I used them to filter my CS, the CS got darker yellow in color. This happened several times so I stopped using those coffee filters as I then figured that the filters are not really unbleached but maybe colored brown to look unbleached and perhaps the coloring is leaching into the CS. It was then suggested by the manufacturer of my CS generator that I could use white cotton handkerchiefs to filter the CS. So now I am using cotton hankies. However, I am noticing that whenever I rinse out the hankies and hang them to dry, I notice a rust colored stain develops on the part that was in contact with the CS. Now I am wondering where this rust color is originating from. The manufacturer has no explanation for the rust color and says that the silver strips being used for the electrodes are 99.9 silver. Any way of testing the electrodes for purity? Also, I am beginning to wonder if the rust is coming from the metal covers that I am using for the quart size mason jars that I use to make and store the CS. Any ideas or comments on this subject is appreciated. Thanks, Josephine . Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). . __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
You can buy small containers at drug stores that produce a fine mist by pushing down on the top. I would try that for snorting. Leo Kent and Carol wrote: I get the same rust colored stains on a measuring cup that I use. After I have finished brewing my CS I strain it using a coffee filter. The container I pour it into has a chip in the glass (this is the measuring cup) and I have noticed a rust coloration forming in the uneven surface of the chip. I am also getting this rust coloration on an eye dropper I use to snort CS with when I get a sinus infection. This is the same rust color that my used coffee filter/strainer gets if I leave laying out for a day or so. I don't know what is causing this but it has something to do with the CS. -Original Message- From: Josephine [mailto:joseph...@poidogs.com] Sent: Saturday, December 29, 2001 11:08 AM To: silver-list@eskimo.com Subject: Re: CSFiltering CS Talking about filtering CS, I bought the unbleached coffee filters, the Melitta brand. When I used them to filter my CS, the CS got darker yellow in color. This happened several times so I stopped using those coffee filters as I then figured that the filters are not really unbleached but maybe colored brown to look unbleached and perhaps the coloring is leaching into the CS. It was then suggested by the manufacturer of my CS generator that I could use white cotton handkerchiefs to filter the CS. So now I am using cotton hankies. However, I am noticing that whenever I rinse out the hankies and hang them to dry, I notice a rust colored stain develops on the part that was in contact with the CS. Now I am wondering where this rust color is originating from. The manufacturer has no explanation for the rust color and says that the silver strips being used for the electrodes are 99.9 silver. Any way of testing the electrodes for purity? Also, I am beginning to wonder if the rust is coming from the metal covers that I am using for the quart size mason jars that I use to make and store the CS. Any ideas or comments on this subject is appreciated. Thanks, Josephine . Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). . __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
Nope, those rods are good stuff. Leo Josephine wrote: maybe the rust colored material is really rust and maybe the silver rods are part silver and part iron? Josephine So what is the rust coloured material. Is the process going too fast? Thanks for your help. This list is wonderful. Leo Kent and Carol wrote: I get the same rust colored stains on a measuring cup that I use. -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
CSFiltering CS
Leo asked: If you strain your stuff with coffee filters, does that mean you are straining out excessive CS out of your solution? Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). I sell a water filter that will filter out anything down to .193 microns, which includes all bacteria and probably all viruses. Silver particles even in low-voltage, yellow CS will be .05 microns and smaller, about 1/40th the size that my water filter will catch, about 1/1000th the size that a coffee filter will catch. __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
Talking about filtering CS, I bought the unbleached coffee filters, the Melitta brand. When I used them to filter my CS, the CS got darker yellow in color. This happened several times so I stopped using those coffee filters as I then figured that the filters are not really unbleached but maybe colored brown to look unbleached and perhaps the coloring is leaching into the CS. It was then suggested by the manufacturer of my CS generator that I could use white cotton handkerchiefs to filter the CS. So now I am using cotton hankies. However, I am noticing that whenever I rinse out the hankies and hang them to dry, I notice a rust colored stain develops on the part that was in contact with the CS. Now I am wondering where this rust color is originating from. The manufacturer has no explanation for the rust color and says that the silver strips being used for the electrodes are 99.9 silver. Any way of testing the electrodes for purity? Also, I am beginning to wonder if the rust is coming from the metal covers that I am using for the quart size mason jars that I use to make and store the CS. Any ideas or comments on this subject is appreciated. Thanks, Josephine . Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). . __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com
Re: CSFiltering CS
So what are the coffeee filters to strain out? Leo Terry Chamberlin wrote: Leo asked: If you strain your stuff with coffee filters, does that mean you are straining out excessive CS out of your solution? Terry replies: Leo, no filter that I have ever heard of can filter out particles of anything as small as CS (unless your CS is dark brown). I sell a water filter that will filter out anything down to .193 microns, which includes all bacteria and probably all viruses. Silver particles even in low-voltage, yellow CS will be .05 microns and smaller, about 1/40th the size that my water filter will catch, about 1/1000th the size that a coffee filter will catch. __ Send your holiday cheer with http://greetings.yahoo.ca -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour mdev...@eskimo.com