[Touch-packages] [Bug 1799647] Re: Patch: Add configuration for german provider winSIM
I believe this is fixed in version 20190618-2. ** Changed in: mobile-broadband-provider-info (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mobile-broadband-provider- info in Ubuntu. https://bugs.launchpad.net/bugs/1799647 Title: Patch: Add configuration for german provider winSIM Status in mobile-broadband-provider-info package in Ubuntu: Fix Released Bug description: I was unable to contribute a patch to the upstream gnome package: https://wiki.gnome.org/Projects/NetworkManager/MobileBroadband/ServiceProviders (They seem to have migrated their git servers away) I still think this little config change adds value to Ubuntu users, hence I am opening this issue. Find the patchfile attached. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mobile-broadband-provider-info/+bug/1799647/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1523100] Re: Alsa not detecting internal microphone [ALC255] (Realtek)
According to #82, that deb was not installed successfully. This is probably because you enabled secure boot in the BIOS or boot the signed kernel. Could you change to use the unsigned kernel (#79), maybe disable the secure boot in the BIOS, then you could load the unsigned kernel. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1523100 Title: Alsa not detecting internal microphone [ALC255] (Realtek) Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've just installed Ubuntu 16.04 alongside Windows 10 on a 64bit Acer Aspire VN7-792G and noticed, that the internal microphone doesn't work. The computer has been released a couple of months ago and it's Intel Skylake -based with a Sunrise Point -based motherboard. INFO: The problem exists in Ubuntu 15.10 too, only microphone jack detected. Currently using Ubuntu 16.04 for proper hardware support. Alsa reports the audio device to be: Card: HDA Intel PCH Chip: Intel Skylake HDMI The speakers are working fine, but both alsamixer and pavucontrol (Pulseaudio Volume Control) raport the unplugged external microphone connector as the only sound input. I have tried many of the alsa model configurations (options snd-hda- intel model=something) without success, alsa finds only the microphone jack, which works fine when I plug an external microphone in it. Here's some info: lspci | grep -I audio: 00:1f.3 Multimedia audio controller: Intel Corporation Sunrise Point-H HD Audio (rev 31) cat /proc/asound/cards: 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x8432 irq 128 And a clip from dmesg | grep snd: [3.019164] snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) [3.047505] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [3.047508] snd_hda_codec_realtek hdaudioC0D0:speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [3.047510] snd_hda_codec_realtek hdaudioC0D0:hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [3.047511] snd_hda_codec_realtek hdaudioC0D0:mono: mono_out=0x0 [3.047512] snd_hda_codec_realtek hdaudioC0D0:dig-out=0x1e/0x0 [3.047512] snd_hda_codec_realtek hdaudioC0D0:inputs: [3.047514] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a One problem is that I can't find any model options (options snd-hda- intel model=something) or other parameters for the card's model (ALC255), I suppose this issue is relatively new. /Dennis --- ApportVersion: 2.19.2-0ubuntu6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dennis 1180 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 16.04 InstallationDate: Installed on 2015-11-11 (23 days ago) InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151110) Package: alsa-driver (not installed) ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6 Tags: xenial Uname: Linux 4.2.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/25/2015 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.02 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire VN7-792G dmi.board.vendor: Acer dmi.board.version: V1.02 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.02:bd09/25/2015:svnAcer:pnAspireVN7-792G:pvrV1.02:rvnAcer:rnAspireVN7-792G:rvrV1.02:cvnAcer:ct10:cvrV1.02: dmi.product.name: Aspire VN7-792G dmi.product.version: V1.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1523100/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1523100] Re: Alsa not detecting internal microphone [ALC255] (Realtek)
@Hui Wang This is my output of the command above. ** Attachment added: "Screenshot from 2019-08-14 10-48-02.png" https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1523100/+attachment/5282466/+files/Screenshot%20from%202019-08-14%2010-48-02.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1523100 Title: Alsa not detecting internal microphone [ALC255] (Realtek) Status in alsa-driver package in Ubuntu: Confirmed Bug description: I've just installed Ubuntu 16.04 alongside Windows 10 on a 64bit Acer Aspire VN7-792G and noticed, that the internal microphone doesn't work. The computer has been released a couple of months ago and it's Intel Skylake -based with a Sunrise Point -based motherboard. INFO: The problem exists in Ubuntu 15.10 too, only microphone jack detected. Currently using Ubuntu 16.04 for proper hardware support. Alsa reports the audio device to be: Card: HDA Intel PCH Chip: Intel Skylake HDMI The speakers are working fine, but both alsamixer and pavucontrol (Pulseaudio Volume Control) raport the unplugged external microphone connector as the only sound input. I have tried many of the alsa model configurations (options snd-hda- intel model=something) without success, alsa finds only the microphone jack, which works fine when I plug an external microphone in it. Here's some info: lspci | grep -I audio: 00:1f.3 Multimedia audio controller: Intel Corporation Sunrise Point-H HD Audio (rev 31) cat /proc/asound/cards: 0 [PCH]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0x8432 irq 128 And a clip from dmesg | grep snd: [3.019164] snd_hda_intel :00:1f.3: bound :00:02.0 (ops i915_audio_component_bind_ops [i915]) [3.047505] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [3.047508] snd_hda_codec_realtek hdaudioC0D0:speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [3.047510] snd_hda_codec_realtek hdaudioC0D0:hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [3.047511] snd_hda_codec_realtek hdaudioC0D0:mono: mono_out=0x0 [3.047512] snd_hda_codec_realtek hdaudioC0D0:dig-out=0x1e/0x0 [3.047512] snd_hda_codec_realtek hdaudioC0D0:inputs: [3.047514] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a One problem is that I can't find any model options (options snd-hda- intel model=something) or other parameters for the card's model (ALC255), I suppose this issue is relatively new. /Dennis --- ApportVersion: 2.19.2-0ubuntu6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dennis 1180 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 16.04 InstallationDate: Installed on 2015-11-11 (23 days ago) InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151110) Package: alsa-driver (not installed) ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6 Tags: xenial Uname: Linux 4.2.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/25/2015 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.02 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire VN7-792G dmi.board.vendor: Acer dmi.board.version: V1.02 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.02:bd09/25/2015:svnAcer:pnAspireVN7-792G:pvrV1.02:rvnAcer:rnAspireVN7-792G:rvrV1.02:cvnAcer:ct10:cvrV1.02: dmi.product.name: Aspire VN7-792G dmi.product.version: V1.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1523100/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839290] Re: systemd doesn't restart a service after crashes
** Changed in: systemd (Ubuntu) Importance: Undecided => Medium ** Changed in: systemd (Ubuntu Xenial) Importance: Undecided => Medium ** Changed in: systemd (Ubuntu Bionic) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1839290 Title: systemd doesn't restart a service after crashes Status in systemd package in Ubuntu: Fix Committed Status in systemd source package in Xenial: New Status in systemd source package in Bionic: New Bug description: Affected versions of OS and systemd: $ cat /etc/issue Ubuntu 16.04.6 LTS \n \l $ systemd --version systemd 229 +PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN Affected packages: systemd 229-4ubuntu21.22 and previous versions. Expected behaviour you didn't see: Scheduling restart of failed service. A process crashed by sigabrt and didn't restart. Description: The bug was reported to a systemd upstream repository: https://github.com/systemd/systemd/issues/11456 The bug was fixed and accepted to the master branch: https://github.com/systemd/systemd/pull/11467/files Action: Include this patch to Ubuntu 16.04 and other version of Ubuntu which are supported. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1839290/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839290] Re: systemd doesn't restart a service after crashes
Fix is in v241 and later upstream ** Also affects: systemd (Ubuntu Bionic) Importance: Undecided Status: New ** Also affects: systemd (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: systemd (Ubuntu) Status: Confirmed => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1839290 Title: systemd doesn't restart a service after crashes Status in systemd package in Ubuntu: Fix Committed Status in systemd source package in Xenial: New Status in systemd source package in Bionic: New Bug description: Affected versions of OS and systemd: $ cat /etc/issue Ubuntu 16.04.6 LTS \n \l $ systemd --version systemd 229 +PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN Affected packages: systemd 229-4ubuntu21.22 and previous versions. Expected behaviour you didn't see: Scheduling restart of failed service. A process crashed by sigabrt and didn't restart. Description: The bug was reported to a systemd upstream repository: https://github.com/systemd/systemd/issues/11456 The bug was fixed and accepted to the master branch: https://github.com/systemd/systemd/pull/11467/files Action: Include this patch to Ubuntu 16.04 and other version of Ubuntu which are supported. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1839290/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1767654] Re: [Intel Braswell] Cursor gets stuck on left side of the screen
If this bug is Braswell-only then it needs to be assigned to the kernel and/or Mesa. ** Also affects: mesa (Ubuntu) Importance: Undecided Status: New ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Changed in: mesa (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1767654 Title: [Intel Braswell] Cursor gets stuck on left side of the screen Status in gnome-shell package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Status in mesa package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Confirmed Bug description: When moving the cursor to the left side of the screen, it stops close to the edge. The cursor still moves over in the area but invisible until I move it out of the area. When it doesn't do this, glitching occurs on the screen where the cursor is until I log out. And on screen cast it shows the cursor going to the side of the screen and moving. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Apr 28 09:49:51 2018 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:2060] InstallationDate: Installed on 2018-04-27 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 8087:0a2a Intel Corp. Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: \\boot\vmlinuz-4.15.0-20-generic root=UUID=c6f92850-287a-4747-ac0d-3af593994183 ro quiet splash vt.handoff=1 initrd=boot\initrd.img-4.15.0-20-generic SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/08/2017 dmi.bios.vendor: Intel Corp. dmi.bios.version: PYBSWCEL.86A.0062.2017.0308.1328 dmi.board.name: NUC5CPYB dmi.board.vendor: Intel Corporation dmi.board.version: H61145-408 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrPYBSWCEL.86A.0062.2017.0308.1328:bd03/08/2017:svn:pn:pvr:rvnIntelCorporation:rnNUC5CPYB:rvrH61145-408:cvn:ct3:cvr: version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.91-2 version.libgl1-mesa-dri: libgl1-mesa-dri 18.0.0~rc5-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 18.0.0~rc5-1ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.6-1ubuntu4 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.0.1-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1767654/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1813131] Re: i965_drv_video.so doesn't load any more if a Wayland server is present [failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbo
** Also affects: mesa (Ubuntu) Importance: Undecided Status: New ** Tags added: bionic regression-update ** Changed in: mesa (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libva in Ubuntu. https://bugs.launchpad.net/bugs/1813131 Title: i965_drv_video.so doesn't load any more if a Wayland server is present [failed to resolve wl_drm_interface(): /lib/x86_64-linux- gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface] Status in Libva: Fix Released Status in intel-vaapi-driver package in Ubuntu: Fix Released Status in libva package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Confirmed Bug description: If a Wayland server is present (anywhere on the system including even the gdm3 login screen) then i965_drv_video.so fails to initialize: $ vainfo libva info: VA-API version 1.3.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_1_2 error: failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed libva info: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit $ mpv bbb_sunflower_2160p_60fps_normal.mp4 Playing: bbb_sunflower_2160p_60fps_normal.mp4 (+) Video --vid=1 (*) (h264 3840x2160 60.000fps) (+) Audio --aid=1 (*) (mp3 2ch 48000Hz) Audio --aid=2 (*) (ac3 6ch 48000Hz) File tags: Artist: Blender Foundation 2008, Janus Bager Kristensen 2013 Comment: Creative Commons Attribution 3.0 - http://bbb3d.renderfarming.net Composer: Sacha Goedegebure Genre: Animation Title: Big Buck Bunny, Sunflower version error: failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface [vaapi] libva: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed Meanwhile, it continues to work after you have logged into a Xorg session. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: i965-va-driver 2.2.0-0ubuntu1 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu19 Architecture: amd64 Date: Thu Jan 24 16:54:21 2019 InstallationDate: Installed on 2018-12-04 (51 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20181203) SourcePackage: intel-vaapi-driver UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/libva/+bug/1813131/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1813131] Re: i965_drv_video.so doesn't load any more if a Wayland server is present [failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbo
This bug now affects Bionic (and the core18 snap as a result) after picking up Mesa 19 from Disco in the 18.04.3 HWE release. $ vainfo libva info: VA-API version 1.1.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_1_1 error: failed to resolve wl_drm_interface(): /usr/lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed libva info: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit $ glxinfo -B name of display: :0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: Intel Open Source Technology Center (0x8086) Device: Mesa DRI Intel(R) UHD Graphics 620 (Kabylake GT2) (0x5917) Version: 19.0.2 Accelerated: yes Video memory: 3072MB Unified memory: yes Preferred profile: core (0x1) Max core profile version: 4.5 Max compat profile version: 3.0 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 3.2 OpenGL vendor string: Intel Open Source Technology Center OpenGL renderer string: Mesa DRI Intel(R) UHD Graphics 620 (Kabylake GT2) OpenGL core profile version string: 4.5 (Core Profile) Mesa 19.0.2 OpenGL core profile shading language version string: 4.50 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile OpenGL version string: 3.0 Mesa 19.0.2 OpenGL shading language version string: 1.30 OpenGL context flags: (none) OpenGL ES profile version string: OpenGL ES 3.2 Mesa 19.0.2 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to libva in Ubuntu. https://bugs.launchpad.net/bugs/1813131 Title: i965_drv_video.so doesn't load any more if a Wayland server is present [failed to resolve wl_drm_interface(): /lib/x86_64-linux- gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface] Status in Libva: Fix Released Status in intel-vaapi-driver package in Ubuntu: Fix Released Status in libva package in Ubuntu: Fix Released Bug description: If a Wayland server is present (anywhere on the system including even the gdm3 login screen) then i965_drv_video.so fails to initialize: $ vainfo libva info: VA-API version 1.3.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_1_2 error: failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed libva info: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit $ mpv bbb_sunflower_2160p_60fps_normal.mp4 Playing: bbb_sunflower_2160p_60fps_normal.mp4 (+) Video --vid=1 (*) (h264 3840x2160 60.000fps) (+) Audio --aid=1 (*) (mp3 2ch 48000Hz) Audio --aid=2 (*) (ac3 6ch 48000Hz) File tags: Artist: Blender Foundation 2008, Janus Bager Kristensen 2013 Comment: Creative Commons Attribution 3.0 - http://bbb3d.renderfarming.net Composer: Sacha Goedegebure Genre: Animation Title: Big Buck Bunny, Sunflower version error: failed to resolve wl_drm_interface(): /lib/x86_64-linux-gnu/libEGL_mesa.so.0: undefined symbol: wl_drm_interface [vaapi] libva: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed Meanwhile, it continues to work after you have logged into a Xorg session. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: i965-va-driver 2.2.0-0ubuntu1 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu19 Architecture: amd64 Date: Thu Jan 24 16:54:21 2019 InstallationDate: Installed on 2018-12-04 (51 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20181203) SourcePackage: intel-vaapi-driver UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/libva/+bug/1813131/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1796501] Re: systemd-resolved tries to mitigate DVE-2018-0001 even if DNSSEC=yes
I've confirmed the fix causes other issues (above), and is still needed for wifi to work at Starbucks (In Toronto) - although DNS failed after accepting to east.datavalet.io. I'm going to reach out to Datavalet and see if they have any thoughts. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1796501 Title: systemd-resolved tries to mitigate DVE-2018-0001 even if DNSSEC=yes Status in systemd package in Ubuntu: In Progress Status in systemd source package in Bionic: In Progress Status in systemd source package in Cosmic: Won't Fix Status in systemd source package in Disco: In Progress Bug description: I ask systemd-resolved through dig to resolve the SOA of test.asdf. (doesn't exist) but it returns SERVFAIL instead of NXDOMAIN. It seems to do the following steps: 1. Ask upstream for SOA of test.asdf. with EDNS0, DO-bit and 4k size. 2. Ask upstream for SOA of test.asdf. with EDNS0 and DO-bit. 3. Ask upstream for SOA of test.asdf. with EDNS0. 4. Ask upstream for SOA of test.asdf. without EDNS0. 5. Repeat 1-4 for DS of test.asdf. 6. Repeat 1-5 for asdf. 7. Ask upstream for SOA of . with EDNS0, DO-bit and 4k size. 8. Ask upstream for DNSKEY of . with EDNS0, DO-bit and 4k size. The upstream returns an unfragmented NXDOMAIN response for steps 1-6, an unfragmented NOERROR response for step 7 and a fragmented NOERROR response for step 8 which is the correct behaviour. DNSSEC records are included in the response if the DO-bit in the request was set. systemd-resolved should take the response from step 1 and start with validation instead of starting useless retries with reduced feture set. Step 3 and 4 are completely useless and probably lead to the SERVFAIL because I have configured it with DNSSEC=yes to prevent downgrade attacks. This regression seems to be caused by the patch resolved-Mitigate- DVE-2018-0001-by-retrying-NXDOMAIN-with.patch. The downgrade logic should only be executed if it is configured as DNSSEC=allow-downgrade or DNSSEC=no. See also https://github.com/systemd/systemd/pull/8608#issuecomment-396927885. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1796501/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1825940] Update Released
The verification of the Stable Release Update for mesa has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1825940 Title: [graphics] Enable ICL Status in intel: Fix Committed Status in linux package in Ubuntu: Fix Released Status in linux-oem-osp1 package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Fix Released Status in linux source package in Bionic: Invalid Status in linux-oem-osp1 source package in Bionic: Fix Released Status in mesa source package in Bionic: Fix Released Bug description: [Impact] Ice Lake (ICL) graphics needs to be enabled for OEM OSP1 image which is based on 18.04.3 graphics stack with linux-oem-osp1 kernel. [Test case] The usual desktop usage, graphics tests etc. [Regression potential] Linux-oem-osp1 kernel is a new kernel used only on new OEM enablements, and it can't regress any currently running system. Mesa backports are limited to ICL, so they shouldn't regress earlier generations either. -- Original description: ICL graphics is not enabled in 19.04. if you want to use 19.04 on ICL platform, you need do like this Add kernel option i915.alpha_support=1 Target Release:19.10 Target Kernel: 5.2 Target Mesa: 19.1 To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1825940/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1796501] Re: systemd-resolved tries to mitigate DVE-2018-0001 even if DNSSEC=yes
** Changed in: systemd (Ubuntu Cosmic) Status: In Progress => Won't Fix -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1796501 Title: systemd-resolved tries to mitigate DVE-2018-0001 even if DNSSEC=yes Status in systemd package in Ubuntu: In Progress Status in systemd source package in Bionic: In Progress Status in systemd source package in Cosmic: Won't Fix Status in systemd source package in Disco: In Progress Bug description: I ask systemd-resolved through dig to resolve the SOA of test.asdf. (doesn't exist) but it returns SERVFAIL instead of NXDOMAIN. It seems to do the following steps: 1. Ask upstream for SOA of test.asdf. with EDNS0, DO-bit and 4k size. 2. Ask upstream for SOA of test.asdf. with EDNS0 and DO-bit. 3. Ask upstream for SOA of test.asdf. with EDNS0. 4. Ask upstream for SOA of test.asdf. without EDNS0. 5. Repeat 1-4 for DS of test.asdf. 6. Repeat 1-5 for asdf. 7. Ask upstream for SOA of . with EDNS0, DO-bit and 4k size. 8. Ask upstream for DNSKEY of . with EDNS0, DO-bit and 4k size. The upstream returns an unfragmented NXDOMAIN response for steps 1-6, an unfragmented NOERROR response for step 7 and a fragmented NOERROR response for step 8 which is the correct behaviour. DNSSEC records are included in the response if the DO-bit in the request was set. systemd-resolved should take the response from step 1 and start with validation instead of starting useless retries with reduced feture set. Step 3 and 4 are completely useless and probably lead to the SERVFAIL because I have configured it with DNSSEC=yes to prevent downgrade attacks. This regression seems to be caused by the patch resolved-Mitigate- DVE-2018-0001-by-retrying-NXDOMAIN-with.patch. The downgrade logic should only be executed if it is configured as DNSSEC=allow-downgrade or DNSSEC=no. See also https://github.com/systemd/systemd/pull/8608#issuecomment-396927885. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1796501/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1825940] Re: [graphics] Enable ICL
This bug was fixed in the package mesa - 19.0.8-0ubuntu0~18.04.1 --- mesa (19.0.8-0ubuntu0~18.04.1) bionic; urgency=medium * New upstream bugfix release. (LP: #1831700) * icl-backport.diff: Backport support for fast color clears and bugfixes for Ice Lake (LP: #1825940). * radeon-rework-gfx9-scissor-workaround.diff: Dropped, upstream. -- Timo Aaltonen Fri, 19 Jul 2019 11:30:04 +0300 ** Changed in: mesa (Ubuntu Bionic) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1825940 Title: [graphics] Enable ICL Status in intel: Fix Committed Status in linux package in Ubuntu: Fix Released Status in linux-oem-osp1 package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Fix Released Status in linux source package in Bionic: Invalid Status in linux-oem-osp1 source package in Bionic: Fix Released Status in mesa source package in Bionic: Fix Released Bug description: [Impact] Ice Lake (ICL) graphics needs to be enabled for OEM OSP1 image which is based on 18.04.3 graphics stack with linux-oem-osp1 kernel. [Test case] The usual desktop usage, graphics tests etc. [Regression potential] Linux-oem-osp1 kernel is a new kernel used only on new OEM enablements, and it can't regress any currently running system. Mesa backports are limited to ICL, so they shouldn't regress earlier generations either. -- Original description: ICL graphics is not enabled in 19.04. if you want to use 19.04 on ICL platform, you need do like this Add kernel option i915.alpha_support=1 Target Release:19.10 Target Kernel: 5.2 Target Mesa: 19.1 To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1825940/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1831700] Re: Mesa 19.0.8 stable release
This bug was fixed in the package mesa - 19.0.8-0ubuntu0~18.04.1 --- mesa (19.0.8-0ubuntu0~18.04.1) bionic; urgency=medium * New upstream bugfix release. (LP: #1831700) * icl-backport.diff: Backport support for fast color clears and bugfixes for Ice Lake (LP: #1825940). * radeon-rework-gfx9-scissor-workaround.diff: Dropped, upstream. -- Timo Aaltonen Fri, 19 Jul 2019 11:30:04 +0300 ** Changed in: mesa (Ubuntu Bionic) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1831700 Title: Mesa 19.0.8 stable release Status in mesa package in Ubuntu: Invalid Status in mesa source package in Bionic: Fix Released Status in mesa source package in Disco: Fix Released Bug description: [Impact] 19.04 released with mesa 19.0.2. We need the last point release of the 19.0.x series in disco and backported for 18.04.3 in order to have the most robust base for the image. [Test case] Check on intel/radeon hw that things still work fine. [Regression potential] this is the last update of the series, all regressions should be shaken off at this point by upstream CI/community To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1831700/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1835622] Re: Cannot start desktop session with compositor enabled
same problem with Xubuntu 18.04.3 64bit 5.0.0-25-generic + ppa:xubuntu- dev/staging (on machines with Intel GPU) - not help update Mesa to 19.0.8-0ubuntu0~18.04.1 from ppa:ubuntu-x-swat/updates - only help disabling Compositor in xfwm4-tweaks-settings as workaround -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1835622 Title: Cannot start desktop session with compositor enabled Status in Xfwm4: Invalid Status in mesa package in Ubuntu: New Status in xfwm4 package in Ubuntu: Invalid Bug description: I cannot login to the Xfce desktop session anymore. in ~/.xsession- errors there's the message: xfwm4: ../src/mesa/drivers/dri/i965/intel_mipmap_tree.c:1285: intel_miptree_match_image: Assertion `image->TexObject->Target == mt->target' failed. Earlier today Mesa was upgraded via bionic-updates from 18.2 to 19.0. I'm running Xubuntu 18.04 and I'm also using the Xubuntu Staging PPA with xfwm4 4.13.3 To manage notifications about this bug go to: https://bugs.launchpad.net/xfwm4/+bug/1835622/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1837537] Re: FTBFS since lxc has different version numbers in Debian and Ubuntu
I'm uploading lua-lxc with an adjustment to the versioned build- dependency, since this has been stuck in -proposed for 250 days already. But ultimately it would be better if Ubuntu followed Debian on the epoch of lxc-dev. I see no reason not to. ** Changed in: lua-lxc (Ubuntu) Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1837537 Title: FTBFS since lxc has different version numbers in Debian and Ubuntu Status in lua-lxc package in Ubuntu: Fix Committed Status in lxc package in Ubuntu: New Bug description: The lua-lxc [1] package currently fails to build since it cannot satisfy the build dependency: lxc-dev (>= 1:3.0.2-1~exp+1). Looks like this is caused by different version numbers in Debian and Ubuntu. The latest version in Debian unstable is 1:3.1.0+really3.0.3-8 while Ubuntu eoan has 3.0.3-0ubuntu1. I believe the 1: epoch (?) is causing this issue. Presumably lua-lxc needs to be patched to allow the Ubuntu package to fulfill the build requirements. [1] https://bugs.launchpad.net/ubuntu/+source/lua-lxc/1:3.0.2-1 [2] https://bugs.launchpad.net/ubuntu/+source/lua-lxc/1:3.0.2-1/+build/16664061 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lua-lxc/+bug/1837537/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1840086] Re: systemd-container should include oci hooks
Can you clarify the description to explain what exactly you're asking for? Do you mean that oci-register-machine and oci-systemd-hook should be packaged and added to Ubuntu? Or something else? I'm not clear on what change you want to systemd. ** Changed in: systemd (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1840086 Title: systemd-container should include oci hooks Status in systemd package in Ubuntu: Incomplete Bug description: there are two OCI hooks which should be included in the systemd- container package, or in their own packages which are recommended by systemd-container. they allow containers based on systemd as pid1 to run correctly in unprivileged runtimes based on OCI, such as docker. https://github.com/projectatomic/oci-register-machine https://github.com/projectatomic/oci-systemd-hook see blog post on 2016 about why this is important: https://developers.redhat.com/blog/2016/09/13/running-systemd-in-a-non-privileged-container/ ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: systemd-container 240-6ubuntu5.3 ProcVersionSignature: Ubuntu 5.0.0-21.22-generic 5.0.15 Uname: Linux 5.0.0-21-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.10-0ubuntu27.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Aug 13 14:44:11 2019 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1840086/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1824384] Re: libapparmor not built with -fPIC
** Changed in: apparmor (Ubuntu) Importance: Undecided => Medium ** Changed in: apparmor (Ubuntu) Status: New => Triaged -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor in Ubuntu. https://bugs.launchpad.net/bugs/1824384 Title: libapparmor not built with -fPIC Status in apparmor package in Ubuntu: Triaged Bug description: Attempted to build snap-confine with DEB_BUILD_MAINT_OPTIONS = hardening=+pie. The build fails with: mv -f snap-confine/.deps/snap_confine_snap_confine-user-support.Tpo snap-confine/.deps/snap_confine_snap_confine-user-support.Po gcc -Wall -Wextra -Wmissing-prototypes -Wstrict-prototypes -Wno-missing-field-initializers -Wno-unused-parameter -Werror -DLIBEXECDIR=\"/usr/lib/snapd\" -DNATIVE_LIBDIR=\"/usr/lib\" -g -O2 -fPIE -fstack-protector-strong -Wformat -Werror=format-security -Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -o snap-confine/snap-confine snap-confine/snap_confine_snap_confine-cookie-support.o snap-confine/snap_confine_snap_confine-mount-support-nvidia.o snap-confine/snap_confine_snap_confine-mount-support.o snap-confine/snap_confine_snap_confine-ns-support.o snap-confine/snap_confine_snap_confine-seccomp-support-ext.o snap-confine/snap_confine_snap_confine-seccomp-support.o snap-confine/snap_confine_snap_confine-snap-confine-args.o snap-confine/snap_confine_snap_confine-snap-confine-invocation.o snap-confine/snap_confine_snap_confine-snap-confine.o snap-confine/snap_confine_snap_confine-udev-support.o snap-confine/snap_confine_snap_confine-user-support.o libsnap-confine-private.a -ludev-Wl,-Bstatic -lcap -lapparmor -Wl,-Bdynamic -pthread /usr/bin/ld: /lib/x86_64-linux-gnu/libapparmor.a(kernel.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC /lib/x86_64-linux-gnu/libapparmor.a: error adding symbols: Bad value collect2: error: ld returned 1 exit status By default, because of snapd reexec support on Ubuntu (and some other distros), snap-confine will try to link a static version libapparmor. It appears that libapparmor object files are built without -fPIC though. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1824384/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589289] Re: fstrim: cannot open /dev/.lxd-mounts: Permission denied
or even better I think: #!/bin/sh # trim all mounted file systems which support it +if /usr/bin/systemd-detect-virt -q -c; then +exit 0 +fi /sbin/fstrim --all || true -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1589289 Title: fstrim: cannot open /dev/.lxd-mounts: Permission denied Status in util-linux package in Ubuntu: Confirmed Bug description: fstrim weekly cronjob output in an unprivileged LXD container: /etc/cron.weekly/fstrim: fstrim: cannot open /dev/.lxd-mounts: Permission denied fstrim: /dev/fuse: not a directory fstrim: /dev/lxd: FITRIM ioctl failed: Operation not permitted There is a github issue: https://github.com/lxc/lxd/issues/2030 The outcome is that it's purely an fstrim misbehaviour, it could be smarter. Stephane Graber comment: As all of this is handled by the kernel, there isn't anything we can do about it in LXD. I think fstrim should be made slightly more clever: * Don't run on bind-mounts (you can detect bind-mounts by parsing /proc/self/mountinfo instead of /proc/mounts) * Maybe not be as noisy on expected errors like EACCES, EPERM and ENOENT, only log actual failures which would likely be EINVAL or memory related errors. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: util-linux 2.27.1-6ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Sun Jun 5 19:49:04 2016 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: util-linux UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1589289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1840086] [NEW] systemd-container should include oci hooks
Public bug reported: there are two OCI hooks which should be included in the systemd- container package, or in their own packages which are recommended by systemd-container. they allow containers based on systemd as pid1 to run correctly in unprivileged runtimes based on OCI, such as docker. https://github.com/projectatomic/oci-register-machine https://github.com/projectatomic/oci-systemd-hook see blog post on 2016 about why this is important: https://developers.redhat.com/blog/2016/09/13/running-systemd-in-a-non-privileged-container/ ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: systemd-container 240-6ubuntu5.3 ProcVersionSignature: Ubuntu 5.0.0-21.22-generic 5.0.15 Uname: Linux 5.0.0-21-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.10-0ubuntu27.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Aug 13 14:44:11 2019 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: systemd (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug disco -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1840086 Title: systemd-container should include oci hooks Status in systemd package in Ubuntu: New Bug description: there are two OCI hooks which should be included in the systemd- container package, or in their own packages which are recommended by systemd-container. they allow containers based on systemd as pid1 to run correctly in unprivileged runtimes based on OCI, such as docker. https://github.com/projectatomic/oci-register-machine https://github.com/projectatomic/oci-systemd-hook see blog post on 2016 about why this is important: https://developers.redhat.com/blog/2016/09/13/running-systemd-in-a-non-privileged-container/ ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: systemd-container 240-6ubuntu5.3 ProcVersionSignature: Ubuntu 5.0.0-21.22-generic 5.0.15 Uname: Linux 5.0.0-21-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.10-0ubuntu27.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Aug 13 14:44:11 2019 SourcePackage: systemd UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1840086/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 508522] Re: Mic is not available with A2DP Bluetooth profile
Maybe this issue has a more fitting issue (and helpful? information): https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1838151 -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/508522 Title: Mic is not available with A2DP Bluetooth profile Status in PulseAudio: New Status in pulseaudio package in Ubuntu: Confirmed Bug description: Binary package hint: pulseaudio I'm testing a Nokia BH-905i headset (see http://www.wissel.net/blog/d6plinks/SHWL-8AZGGF ) on Ubuntu 10.10. The Bluetooth module correctly identifies the headset and the both audio profiles "HSP/ HFP Telephony duplex" and "A2DP High Fidelity Playback". For music playback only A2DP is suitable (HSP/HFP sounds like listening to music played through an old telephone). A2DP does not have an INPUT mode, so use of the headset for VoiP isn't possible. What would be needed is a separate selection to allow to select A2DP for output and HSP/HFP for input. Smartphones (a lot of them *nix based) phones do that (or they switch on the fly?). Formal structure: 1) Ubuntu 10.10 2) Pulse-Audio 1:0.9.22~0.9.21+stable-queue-32-g8478-0ubuntu21.1 consisting og pluseaudio, pulseaudio-esound-compat, pulseaudio-module-bluetooth, pulseaudio-module-gconf, pulseaudio-module-x11, pulseaudio-utils 3) Select high quality audio output and still use the Bluetooth microphone 4) Had to choose: either high quality audio or "telephone quality" with microphone I can change the profile without the Bluetooth connection dropping, but that's ridiculous. E.g. listening to music, a call comes in. Then I would need to switch the profile before answering. Please note that in Windows, Mac OS, iOS, Android, and Windows Mobile it's done automatically. Check out attached screencast. ProblemType: Bug AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: oivasyuv 2309 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xd850 irq 17' Mixer name : 'Analog Devices AD1984A' Components : 'HDA:11d4194a,103c30e8,00100400' Controls : 22 Simple ctrls : 14 Date: Sat Jan 16 22:31:41 2010 DistroRelease: Ubuntu 9.10 InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5) Package: pulseaudio 1:0.9.19-0ubuntu4 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-17.54-generic-pae SourcePackage: pulseaudio Uname: Linux 2.6.31-17-generic-pae i686 To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/508522/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589289] Re: fstrim: cannot open /dev/.lxd-mounts: Permission denied
from: #!/bin/sh # trim all mounted file systems which support it /sbin/fstrim --all || true to: #!/bin/sh # trim all mounted file systems which support it if ! /usr/bin/systemd-detect-virt -q -c; then /sbin/fstrim --all || true fi -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1589289 Title: fstrim: cannot open /dev/.lxd-mounts: Permission denied Status in util-linux package in Ubuntu: Confirmed Bug description: fstrim weekly cronjob output in an unprivileged LXD container: /etc/cron.weekly/fstrim: fstrim: cannot open /dev/.lxd-mounts: Permission denied fstrim: /dev/fuse: not a directory fstrim: /dev/lxd: FITRIM ioctl failed: Operation not permitted There is a github issue: https://github.com/lxc/lxd/issues/2030 The outcome is that it's purely an fstrim misbehaviour, it could be smarter. Stephane Graber comment: As all of this is handled by the kernel, there isn't anything we can do about it in LXD. I think fstrim should be made slightly more clever: * Don't run on bind-mounts (you can detect bind-mounts by parsing /proc/self/mountinfo instead of /proc/mounts) * Maybe not be as noisy on expected errors like EACCES, EPERM and ENOENT, only log actual failures which would likely be EINVAL or memory related errors. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: util-linux 2.27.1-6ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Sun Jun 5 19:49:04 2016 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: util-linux UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1589289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589289] Re: fstrim: cannot open /dev/.lxd-mounts: Permission denied
We could also implement a check mechanism inside "/etc/cron.weekly/fstrim" using'systemd-detect-virt', if it's a container don't run it, otherwise let's do it. [/etc/cron.weekly/fstrim] # script as-is #!/bin/sh # trim all mounted file systems which support it /sbin/fstrim --all || true -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1589289 Title: fstrim: cannot open /dev/.lxd-mounts: Permission denied Status in util-linux package in Ubuntu: Confirmed Bug description: fstrim weekly cronjob output in an unprivileged LXD container: /etc/cron.weekly/fstrim: fstrim: cannot open /dev/.lxd-mounts: Permission denied fstrim: /dev/fuse: not a directory fstrim: /dev/lxd: FITRIM ioctl failed: Operation not permitted There is a github issue: https://github.com/lxc/lxd/issues/2030 The outcome is that it's purely an fstrim misbehaviour, it could be smarter. Stephane Graber comment: As all of this is handled by the kernel, there isn't anything we can do about it in LXD. I think fstrim should be made slightly more clever: * Don't run on bind-mounts (you can detect bind-mounts by parsing /proc/self/mountinfo instead of /proc/mounts) * Maybe not be as noisy on expected errors like EACCES, EPERM and ENOENT, only log actual failures which would likely be EINVAL or memory related errors. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: util-linux 2.27.1-6ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Sun Jun 5 19:49:04 2016 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: util-linux UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1589289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589289] Re: fstrim: cannot open /dev/.lxd-mounts: Permission denied
hmmm it is installed under examples/ so not used at all by default. # dpkg -l util-linux /usr/share/doc/util-linux/examples/fstrim.service -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1589289 Title: fstrim: cannot open /dev/.lxd-mounts: Permission denied Status in util-linux package in Ubuntu: Confirmed Bug description: fstrim weekly cronjob output in an unprivileged LXD container: /etc/cron.weekly/fstrim: fstrim: cannot open /dev/.lxd-mounts: Permission denied fstrim: /dev/fuse: not a directory fstrim: /dev/lxd: FITRIM ioctl failed: Operation not permitted There is a github issue: https://github.com/lxc/lxd/issues/2030 The outcome is that it's purely an fstrim misbehaviour, it could be smarter. Stephane Graber comment: As all of this is handled by the kernel, there isn't anything we can do about it in LXD. I think fstrim should be made slightly more clever: * Don't run on bind-mounts (you can detect bind-mounts by parsing /proc/self/mountinfo instead of /proc/mounts) * Maybe not be as noisy on expected errors like EACCES, EPERM and ENOENT, only log actual failures which would likely be EINVAL or memory related errors. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: util-linux 2.27.1-6ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Sun Jun 5 19:49:04 2016 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: util-linux UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1589289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589289] Re: fstrim: cannot open /dev/.lxd-mounts: Permission denied
I started to read that bug a couple of days ago Maybe using 'ConditionVirtualization=!container' should be enought to prevent fstrim from running inside container, I'll give it a try later this week. If its work as expected, I'll submit it upstream. 'container' type would cover the following: openvz OpenVZ/Virtuozzo lxc Linux container implementation by LXC lxc-libvirt Linux container implementation by libvirt systemd-nspawn systemd's minimal container implementation, see systemd-nspawn(1) docker Docker container manager podman Podman container manager rkt rkt app container runtime wsl Windows Subsystem for Linux Reference: https://www.freedesktop.org/software/systemd/man/systemd-detect-virt.html# -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1589289 Title: fstrim: cannot open /dev/.lxd-mounts: Permission denied Status in util-linux package in Ubuntu: Confirmed Bug description: fstrim weekly cronjob output in an unprivileged LXD container: /etc/cron.weekly/fstrim: fstrim: cannot open /dev/.lxd-mounts: Permission denied fstrim: /dev/fuse: not a directory fstrim: /dev/lxd: FITRIM ioctl failed: Operation not permitted There is a github issue: https://github.com/lxc/lxd/issues/2030 The outcome is that it's purely an fstrim misbehaviour, it could be smarter. Stephane Graber comment: As all of this is handled by the kernel, there isn't anything we can do about it in LXD. I think fstrim should be made slightly more clever: * Don't run on bind-mounts (you can detect bind-mounts by parsing /proc/self/mountinfo instead of /proc/mounts) * Maybe not be as noisy on expected errors like EACCES, EPERM and ENOENT, only log actual failures which would likely be EINVAL or memory related errors. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: util-linux 2.27.1-6ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Sun Jun 5 19:49:04 2016 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: util-linux UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1589289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1589289] Re: fstrim: cannot open /dev/.lxd-mounts: Permission denied
I started to read that bug a couple of days ago Maybe using 'ConditionVirtualization=container' should be enought to prevent fstrim from running inside container, I'll give it a try later this week. If its work as expected, I'll submit it upstream. 'container' type would cover the following: openvz OpenVZ/Virtuozzo lxc Linux container implementation by LXC lxc-libvirt Linux container implementation by libvirt systemd-nspawn systemd's minimal container implementation, see systemd-nspawn(1) docker Docker container manager podman Podman container manager rkt rkt app container runtime wsl Windows Subsystem for Linux Reference: https://www.freedesktop.org/software/systemd/man/systemd-detect-virt.html# -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to util-linux in Ubuntu. https://bugs.launchpad.net/bugs/1589289 Title: fstrim: cannot open /dev/.lxd-mounts: Permission denied Status in util-linux package in Ubuntu: Confirmed Bug description: fstrim weekly cronjob output in an unprivileged LXD container: /etc/cron.weekly/fstrim: fstrim: cannot open /dev/.lxd-mounts: Permission denied fstrim: /dev/fuse: not a directory fstrim: /dev/lxd: FITRIM ioctl failed: Operation not permitted There is a github issue: https://github.com/lxc/lxd/issues/2030 The outcome is that it's purely an fstrim misbehaviour, it could be smarter. Stephane Graber comment: As all of this is handled by the kernel, there isn't anything we can do about it in LXD. I think fstrim should be made slightly more clever: * Don't run on bind-mounts (you can detect bind-mounts by parsing /proc/self/mountinfo instead of /proc/mounts) * Maybe not be as noisy on expected errors like EACCES, EPERM and ENOENT, only log actual failures which would likely be EINVAL or memory related errors. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: util-linux 2.27.1-6ubuntu3 ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 Date: Sun Jun 5 19:49:04 2016 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: util-linux UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1589289/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839290] Re: systemd doesn't restart a service after crashes
** Tags added: rls-xx-incoming -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1839290 Title: systemd doesn't restart a service after crashes Status in systemd package in Ubuntu: Confirmed Bug description: Affected versions of OS and systemd: $ cat /etc/issue Ubuntu 16.04.6 LTS \n \l $ systemd --version systemd 229 +PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN Affected packages: systemd 229-4ubuntu21.22 and previous versions. Expected behaviour you didn't see: Scheduling restart of failed service. A process crashed by sigabrt and didn't restart. Description: The bug was reported to a systemd upstream repository: https://github.com/systemd/systemd/issues/11456 The bug was fixed and accepted to the master branch: https://github.com/systemd/systemd/pull/11467/files Action: Include this patch to Ubuntu 16.04 and other version of Ubuntu which are supported. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1839290/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839231] Re: updating bionic to 237-3ubuntu10.25 restarts systemd-networkd
Thanks! This system is using netplan, with ipv6-privacy enabled in netplan (subsequent to the fix in bug #1750392): root@pentos:~# cat /etc/netplan/01-netcfg.yaml # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: ens5: dhcp4: true ipv6-privacy: true The issue reproduces with the ens5 interface. Stopping systemd-networkd does not change any addresses, but starting it again removes all the "deprecated" addresses, even if they are in use by TCP connections: root@pentos:~# ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens5: mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether [mac-redacted] brd ff:ff:ff:ff:ff:ff inet 192.168.1.103/24 brd 192.168.1.255 scope global dynamic ens5 valid_lft 52839sec preferred_lft 52839sec inet6 [redacted-ipv6-/64]:8d03:bfce:131d:190/64 scope global temporary dynamic valid_lft 596sec preferred_lft 596sec inet6 [redacted-ipv6-/64]:306e:2bf2:9d28:ef32/64 scope global temporary deprecated dynamic valid_lft 596sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:c060:f52:5638:10e9/64 scope global temporary deprecated dynamic valid_lft 596sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:d941:e7ff:cc75:9968/64 scope global temporary deprecated dynamic valid_lft 596sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:2dae:1ae3:c572:ed57/64 scope global temporary deprecated dynamic valid_lft 596sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:90ec:5051:54de:f345/64 scope global temporary deprecated dynamic valid_lft 596sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:5497:3bdc:6452:c67f/64 scope global temporary deprecated dynamic valid_lft 596sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:[slaac-redacted]/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 596sec preferred_lft 596sec inet6 fe80::[ll-redacted]/64 scope link valid_lft forever preferred_lft forever root@pentos:~# systemctl stop systemd-networkd root@pentos:~# ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens5: mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether [mac-redacted] brd ff:ff:ff:ff:ff:ff inet 192.168.1.103/24 brd 192.168.1.255 scope global dynamic ens5 valid_lft 52794sec preferred_lft 52794sec inet6 [redacted-ipv6-/64]:8d03:bfce:131d:190/64 scope global temporary dynamic valid_lft 587sec preferred_lft 587sec inet6 [redacted-ipv6-/64]:306e:2bf2:9d28:ef32/64 scope global temporary deprecated dynamic valid_lft 587sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:c060:f52:5638:10e9/64 scope global temporary deprecated dynamic valid_lft 587sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:d941:e7ff:cc75:9968/64 scope global temporary deprecated dynamic valid_lft 587sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:2dae:1ae3:c572:ed57/64 scope global temporary deprecated dynamic valid_lft 587sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:90ec:5051:54de:f345/64 scope global temporary deprecated dynamic valid_lft 587sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:5497:3bdc:6452:c67f/64 scope global temporary deprecated dynamic valid_lft 587sec preferred_lft 0sec inet6 [redacted-ipv6-/64]:[slaac-redacted]/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 587sec preferred_lft 587sec inet6 fe80::[ll-redacted]/64 scope link valid_lft forever preferred_lft forever root@pentos:~# systemctl start systemd-networkd root@pentos:~# ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens5: mtu 1500 qdisc fq_codel state UP group default qlen 1000
[Touch-packages] [Bug 1455599] Re: package libgcr-3-common 3.10.1-1 failed to install/upgrade: trying to overwrite '/usr/share/gcr-3/ui/gcr-unlock-options-widget.ui', which is also in package libgcr-3
The issue was a transition is older versions, that's not an issue anymore, closing ** Changed in: gcr (Ubuntu) Importance: Undecided => Low ** Changed in: gcr (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gcr in Ubuntu. https://bugs.launchpad.net/bugs/1455599 Title: package libgcr-3-common 3.10.1-1 failed to install/upgrade: trying to overwrite '/usr/share/gcr-3/ui/gcr-unlock-options-widget.ui', which is also in package libgcr-3-1 3.2.2-0ubuntu0.1 Status in gcr package in Ubuntu: Invalid Bug description: Why in the world would you make this window take up the full screen amd make it so it cannot be adjusted so I can run the commands that you want me to. Release 14.04 gdm 3.10.0.1-0ubuntu3.1 System problem detected repeatedly pops up. It reports verious problems. I think the launcher is busted. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libgcr-3-common 3.10.1-1 ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18 Uname: Linux 3.13.0-52-generic i686 ApportVersion: 2.14.1-0ubuntu3.10 Architecture: i386 Date: Fri May 15 09:49:05 2015 Dependencies: DuplicateSignature: package:libgcr-3-common:3.10.1-1:trying to overwrite '/usr/share/gcr-3/ui/gcr-unlock-options-widget.ui', which is also in package libgcr-3-1 3.2.2-0ubuntu0.1 ErrorMessage: trying to overwrite '/usr/share/gcr-3/ui/gcr-unlock-options-widget.ui', which is also in package libgcr-3-1 3.2.2-0ubuntu0.1 InstallationDate: Installed on 2011-12-26 (1235 days ago) InstallationMedia: Ubuntu-Server 11.10 "Oneiric Ocelot" - Release i386 (20111011) PackageArchitecture: all SourcePackage: gcr Title: package libgcr-3-common 3.10.1-1 failed to install/upgrade: trying to overwrite '/usr/share/gcr-3/ui/gcr-unlock-options-widget.ui', which is also in package libgcr-3-1 3.2.2-0ubuntu0.1 UpgradeStatus: Upgraded to trusty on 2015-05-15 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gcr/+bug/1455599/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1813581] Re: gpgme1.0 ftbfs in 18.04 LTS
We can signal that it should be left in -proposed by adding the "block- proposed" tag to the bug tags and this information will be displayed on the SRU report. ** Changed in: gpgme1.0 (Ubuntu Bionic) Status: In Progress => Fix Committed ** Tags added: verification-needed verification-needed-bionic -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gpgme1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1813581 Title: gpgme1.0 ftbfs in 18.04 LTS Status in gpgme1.0 package in Ubuntu: Won't Fix Status in gpgme1.0 source package in Bionic: Fix Committed Bug description: [Impact] according to http://people.canonical.com/~doko/ftbfs-report/test-rebuild-20181222-bionic.html gpgme1.0 ftbfs. * Start testing of TofuInfoTest * Config: Using QtTest library 5.9.5, Qt 5.9.5 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.3.0) PASS : TofuInfoTest::initTestCase() PASS : TofuInfoTest::testTofuNull() PASS : TofuInfoTest::testTofuInfo() PASS : TofuInfoTest::testTofuSignCount() PASS : TofuInfoTest::testTofuKeyList() PASS : TofuInfoTest::testTofuPolicy() FAIL! : TofuInfoTest::testTofuConflict() 'sig.validity() == Signature::Marginal' returned FALSE. () Loc: [t-tofuinfo.cpp(458)] PASS : TofuInfoTest::cleanupTestCase() Totals: 7 passed, 1 failed, 0 skipped, 0 blacklisted, 2386ms * Finished testing of TofuInfoTest * FAIL: t-tofuinfo [Test case] build it [Regression potential] This only changes the test suite run during build, and that one currently fails, so it can't cause any regression. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gpgme1.0/+bug/1813581/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1813581] Please test proposed package
Hello Matthias, or anyone else affected, Accepted gpgme1.0 into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/gpgme1.0/1.10.0-1ubuntu2.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested and change the tag from verification-needed-bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed-bionic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Tags added: block-proposed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gpgme1.0 in Ubuntu. https://bugs.launchpad.net/bugs/1813581 Title: gpgme1.0 ftbfs in 18.04 LTS Status in gpgme1.0 package in Ubuntu: Won't Fix Status in gpgme1.0 source package in Bionic: Fix Committed Bug description: [Impact] according to http://people.canonical.com/~doko/ftbfs-report/test-rebuild-20181222-bionic.html gpgme1.0 ftbfs. * Start testing of TofuInfoTest * Config: Using QtTest library 5.9.5, Qt 5.9.5 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.3.0) PASS : TofuInfoTest::initTestCase() PASS : TofuInfoTest::testTofuNull() PASS : TofuInfoTest::testTofuInfo() PASS : TofuInfoTest::testTofuSignCount() PASS : TofuInfoTest::testTofuKeyList() PASS : TofuInfoTest::testTofuPolicy() FAIL! : TofuInfoTest::testTofuConflict() 'sig.validity() == Signature::Marginal' returned FALSE. () Loc: [t-tofuinfo.cpp(458)] PASS : TofuInfoTest::cleanupTestCase() Totals: 7 passed, 1 failed, 0 skipped, 0 blacklisted, 2386ms * Finished testing of TofuInfoTest * FAIL: t-tofuinfo [Test case] build it [Regression potential] This only changes the test suite run during build, and that one currently fails, so it can't cause any regression. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gpgme1.0/+bug/1813581/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1815172] Re: [bionic] drm/i915: softpin broken, needs to be fixed for 32bit mesa
** Changed in: mesa (Ubuntu Bionic) Status: Fix Committed => In Progress -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1815172 Title: [bionic] drm/i915: softpin broken, needs to be fixed for 32bit mesa Status in Mesa: Fix Released Status in linux package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Status in mesa source package in Bionic: In Progress Status in linux source package in Cosmic: Won't Fix Status in mesa source package in Cosmic: Fix Released Bug description: [Impact] Several schools reported black screens after normally updating their Ubuntu boxes from 18.0.5-0ubuntu0~18.04.1 to 18.2.2-0ubuntu1~18.04.1. Downgrading mesa fixes the problem. lspci: 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) Subsystem: ASUSTeK Computer Inc. HD Graphics 530 [1043:8694]Kernel modules: i915 Unfortunately I can't find a lot of useful information, here are some bits: * systemctl --failed says "gpu-manager" and "lightdm" have failed * Xorg.log is clean: https://termbin.com/6l2b * dmesg too: https://termbin.com/ip4e * It happens on lightdm/MATE, I don't know about Ubuntu GNOME. * If one runs `xinit` from ssh, it fails with: i965: Failed to submit batchbuffer: Invalid argument This is caused by mesa assuming that soft-pinning on GEN8+ is working since kernel 4.5, but in fact this issue wasn't fixed until 4.19.3. So a proper fix would be to backport commits from 4.19.3/4.20 to fix GTT sizes/pin flags, but that's left for future. [Test case] install fixed mesa or kernel, check that the regression is fixed [Regression potential] mesa: shouldn't be any, it just reverts the change to always soft-pin (TODO kernel: adds commits from upstream stable, which have been well tested upstream by now) To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/1815172/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1834138] Re: PA: Don't restore the streams to sinks/sources with only unavailable ports
Please update the "Regression Potential" of the bug description. Additionally, I think this should be reuploaded to bionic-proposed queue in such a fashion that 1556439 will appear in Launchpad-Bugs-Fixed so that we reverify the fix for that bug when verifying the new pulseaudio upload. ** Changed in: pulseaudio (Ubuntu Bionic) Status: In Progress => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1834138 Title: PA: Don't restore the streams to sinks/sources with only unavailable ports Status in HWE Next: New Status in OEM Priority Project: Confirmed Status in pulseaudio package in Ubuntu: Fix Released Status in pulseaudio source package in Bionic: Incomplete Status in pulseaudio source package in Disco: Fix Committed Status in pulseaudio source package in Eoan: Fix Released Bug description: SRU Document: [Impact] The Lenovo P520 machine has dual analogue codecs, so there are two sinks and two sources in the PA, one has the front headphone and front microphone, the other has the rear lineout, linein and rear microphone, and the rear microphone always shows up in the gnome- sound-setting, When we plug a microphone to front audio jack, there are two input devices: rear mic and front mic in the gnome-sound- setting, and suppose users select the the front mic to record sound via audio app like arecord, the front mic will be bond the arecord, after the front mic is unplugged, there is only one rear mic left in the gnome-sound-setting, but the binding will not be changed, the arecrod still bind to front mic, under this situation if users record sound via arecord, they will find they can't record any sound from any other input devices even they are listed in the gnome-sound-setting. This problem also happens to output devices too. [Test Case] After applying this patch, I did the same test: unplug the front mic, then use the arecord to record sound, the app can record sound from rear mic now. After I plug the front mic back, the arecord still record from front mic. Also did the similar test for output devices, it worked as expected too. [Regression Potential] No, Just make a simple check when creating new streams (sink_input/source_output), If the restored device (sink/source) has ports and all ports are unavialble, it will not restore the binding, otherwise it will work as before. [Other Info] No more info here To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1834138/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1837580] Re: memlock is not set
The same happens to me, same distro, some infos are different (namely the kernel, 4.18.0-18-generic, since 5.0.0... frozes my machine - another issue to be investigated), but I don't think these differences are relevant. I've set DefaultLimitMEMLOCK=infinity in /etc/systemd/system.conf and also /etc/systemd/user.conf (also tried to put a file in newly created /etc/systemd/user.conf.d) /etc/security/limits.d/audio.conf has @audio - rtprio 95 @audio - memlockunlimited As root I can ulimit -l to unlimited. As normal user (in the group audio of course) I can't go with more than 65536. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to systemd in Ubuntu. https://bugs.launchpad.net/bugs/1837580 Title: memlock is not set Status in systemd package in Ubuntu: New Status in systemd package in Debian: Unknown Bug description: I discovered this in relation to jack, which installs /etc/security/limits.d/audio.conf, containing: @audio - rtprio 95 @audio - memlockunlimited For a user in the audio group: $ulimit -l -r max locked memory (kbytes, -l) 65536 real-time priority (-r) 95 So jack (run as user via qjackctl) reports: ERROR: Cannot lock down 82280346 byte memory area (Cannot allocate memory) but does not report that it cannot set real-time priority, which it does if run by a user not in the audio group. I also tried putting the line in /etc/security/limits.conf, and trying a number rather than "unlimited", but it didn't help. Also reported independently here: https://askubuntu.com/questions/1142943/ulimit-unlimited-cannot-set ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: libpam-modules:amd64 1.3.1-5ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-20.21-lowlatency 5.0.8 Uname: Linux 5.0.0-20-lowlatency x86_64 ApportVersion: 2.20.10-0ubuntu27.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Tue Jul 23 15:07:52 2019 InstallationDate: Installed on 2016-10-25 (1000 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: pam UpgradeStatus: Upgraded to disco on 2019-07-19 (3 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1837580/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1833114] Re: print page dialog latency when trying to cancel or to save
** Changed in: gtk+3.0 (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1833114 Title: print page dialog latency when trying to cancel or to save Status in chromium-browser package in Ubuntu: New Status in gtk+3.0 package in Ubuntu: Confirmed Bug description: Since less than a month ago, using the print page dialog (which for me defaults to saving as PDF) is outlandishly slow. Once opened, if I try to close it (click cancel / press Esc) or to use it (click Save or press Enter), there is no visible response, and my system hangs for 10 seconds. After that though, the operation concludes successfully and things return to normal. This did not used to happen. Closing or submitting the print-to-PDF used to result in the pop-up window closing immediately and the browser regaining responsiveness. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: chromium-browser 74.0.3729.169-0ubuntu0.19.04.1 ProcVersionSignature: Ubuntu 5.0.0-16.17-generic 5.0.8 Uname: Linux 5.0.0-16-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DRM.card0-DP-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-DP-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-DP-5: enabled: enabled dpms: On status: connected edid-base64: AP///wAEchAEyHEQUQsZAQSlRyh4PiVfqFRNnyUOT1O/74BxT4FAgYCBwIEAlQCzANHATdAAoPBwPoAwIDUAxY8hAAAaBHQAMPJwWoCwWIoAxY8hAAAa/QAdTB+gPAEKICAgICAg/ABCMzI2SEsKICAgICAgAQwCAxzhT5ACAwQFBgcBERITFBUWHyMJBweDAQAAAjqAGHE4LUBYLEUAxY8hAAAeAR2AGHEcFiBYLCUAxY8hAACeAR0AclHQHiBuKFUAxY8hAAAejArQiiDgLRAQPpYAxY8hAAAYVl4AoKCgKVAwIDUAxI8hAAAa modes: 3840x2160 3840x2160 2560x1440 1920x1080 1920x1080 1920x1080 1920x1080 1680x1050 1280x1024 1280x1024 1440x900 1280x960 1280x800 1152x864 1280x720 1280x720 1280x720 1280x720 1024x768 1024x768 1024x768 832x624 800x600 800x600 800x600 800x600 720x576 720x576 720x480 720x480 720x480 720x480 720x480 640x480 640x480 640x480 640x480 640x480 640x480 720x400 DRM.card0-DP-6: enabled: disabled dpms: On status: connected edid-base64: AP///wAQrAngTEFNMAkPAQPOKxt46gGVo1dMnCUSUFSlSwCBgHFPAQEBAQEBAQEBAQEBfC6QoGAaHkAwIDYAsg4RAAAa/wBUNjEzMDUzMjBNQUwK/QA4Sx5TDgAKICAgICAg/ABERUxMIDIwMDVGUFcKAAM= modes: 1680x1050 1280x1024 1280x1024 1152x864 1024x768 1024x768 800x600 800x600 640x480 640x480 720x400 DRM.card0-DP-7: enabled: disabled dpms: On status: disconnected edid-base64: modes: DRM.card0-HDMI-A-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-HDMI-A-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-eDP-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAGrz0TACYXAQSVHxF4AoflpFZQniYNUFQBAQEBAQEBAQEBAQEBAQEBFDeAuHA4JEAQED4ANa0QAAAYDwAg/gBBVU8KICAgICAgICAg/gBCMTQwSEFOMDEuMyAKAHo= modes: 1920x1080 Date: Mon Jun 17 14:03:12 2019 Desktop-Session: 'ubuntu' '/etc/xdg/xdg-ubuntu:/etc/xdg' '/usr/share/ubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop' DetectedPlugins: EcryptfsInUse: Yes Env: 'None' 'None' InstallationDate: Installed on 2019-01-24 (144 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: Load-Avg-1min: 3.09 Load-Processes-Running-Percent: 0.1% MachineType: LENOVO 20BXCTO1WW ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-16-generic root=UUID=a6081f39-700f-4698-bda4-464e53d9d229 ro quiet splash vt.handoff=1 SourcePackage: chromium-browser UpgradeStatus: Upgraded to disco on 2019-05-29 (19 days ago) dmi.bios.date: 09/13/2017 dmi.bios.vendor: LENOVO dmi.bios.version: JBET66WW (1.30 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BXCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJBET66WW(1.30):bd09/13/2017:svnLENOVO:pn20BXCTO1WW:pvrThinkPadT450s:rvnLENOVO:rn20BXCTO1WW:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T450s dmi.product.name: 20BXCTO1WW dmi.product.sku: LENOVO_MT_20BX_BU_Think_FM_ThinkPad T450s dmi.product.version: ThinkPad T450s dmi.sys.vendor: LENOVO modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1833114/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to :
[Touch-packages] [Bug 1831700] Re: Mesa 19.0.8 stable release
This bug was fixed in the package mesa - 19.0.8-0ubuntu0~19.04.1 --- mesa (19.0.8-0ubuntu0~19.04.1) disco; urgency=medium * New upstream bugfix release. (LP: #1831700) * radeon-rework-gfx9-scissor-workaround.diff: Dropped, upstream. -- Timo Aaltonen Thu, 04 Jul 2019 11:08:43 +0300 ** Changed in: mesa (Ubuntu Disco) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1831700 Title: Mesa 19.0.8 stable release Status in mesa package in Ubuntu: Invalid Status in mesa source package in Bionic: Fix Committed Status in mesa source package in Disco: Fix Released Bug description: [Impact] 19.04 released with mesa 19.0.2. We need the last point release of the 19.0.x series in disco and backported for 18.04.3 in order to have the most robust base for the image. [Test case] Check on intel/radeon hw that things still work fine. [Regression potential] this is the last update of the series, all regressions should be shaken off at this point by upstream CI/community To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1831700/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1831700] Update Released
The verification of the Stable Release Update for mesa has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1831700 Title: Mesa 19.0.8 stable release Status in mesa package in Ubuntu: Invalid Status in mesa source package in Bionic: Fix Committed Status in mesa source package in Disco: Fix Released Bug description: [Impact] 19.04 released with mesa 19.0.2. We need the last point release of the 19.0.x series in disco and backported for 18.04.3 in order to have the most robust base for the image. [Test case] Check on intel/radeon hw that things still work fine. [Regression potential] this is the last update of the series, all regressions should be shaken off at this point by upstream CI/community To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1831700/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1836258] Re: Update hyperlink when enabling UCA
This bug was fixed in the package software-properties - 0.96.24.32.11 --- software-properties (0.96.24.32.11) bionic; urgency=medium * cloudarchive: Update outdated WEB_LINK that is presented when cloud archive is enabled (LP: #1836258). -- Corey Bryant Fri, 12 Jul 2019 10:10:04 -0400 ** Changed in: software-properties (Ubuntu Bionic) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1836258 Title: Update hyperlink when enabling UCA Status in software-properties package in Ubuntu: Fix Released Status in software-properties source package in Xenial: Fix Released Status in software-properties source package in Bionic: Fix Released Status in software-properties source package in Eoan: Fix Released Bug description: [Impact] When enabling UCA a hyperlink is printed: $ sudo add-apt-repository cloud-archive:train-proposed Ubuntu Cloud Archive for OpenStack Train [proposed] More info: https://wiki.ubuntu.com/ServerTeam/CloudArchive Press [ENTER] to continue or Ctrl-c to cancel adding it. The hyperlink redirects to: https://wiki.ubuntu.com/OpenStack/CloudArchive so it should just be corrected at the source: https://git.launchpad.net/ubuntu/+source/software- properties/tree/softwareproperties/cloudarchive.py#n50 [Test Case] The "More info:" link should be https://wiki.ubuntu.com/OpenStack/CloudArchive, for example: root@b1:~# sudo add-apt-repository cloud-archive:queens Ubuntu Cloud Archive for OpenStack Queens More info: https://wiki.ubuntu.com/OpenStack/CloudArchive Press [ENTER] to continue or Ctrl-c to cancel adding it. [Regression Potential] This change is extremely minimal as it only updates a string that points to a wiki URL. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1836258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1835910] Re: Include a control to display or not the livepatch indicator
This bug was fixed in the package software-properties - 0.96.24.32.11 --- software-properties (0.96.24.32.11) bionic; urgency=medium * cloudarchive: Update outdated WEB_LINK that is presented when cloud archive is enabled (LP: #1836258). -- Corey Bryant Fri, 12 Jul 2019 10:10:04 -0400 ** Changed in: software-properties (Ubuntu Bionic) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1835910 Title: Include a control to display or not the livepatch indicator Status in software-properties package in Ubuntu: Fix Released Status in software-properties source package in Bionic: Fix Released Bug description: * Impact The livepatch UI design includes a control in software-properties which let you enable the indicator or not, that UI element is currently missing from bionic * Test case - start software-properties - go the livepatch tab and enable livepatch by adding an account -> the UI should include a toggle that let you activate/disactive the indicator - click on the control button -> the indicator status should reflect the control one * Regression potential The change is adding a new widget, it shouldn't impact on existing code but check that the page layout is still correct. The change also include translatable strings, they are being handled the same way as the other livepatch strings added in the previous upload (shared translations between serie included in langpack updates) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1835910/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1835911] Re: Handle applying status
This bug was fixed in the package software-properties - 0.96.24.32.11 --- software-properties (0.96.24.32.11) bionic; urgency=medium * cloudarchive: Update outdated WEB_LINK that is presented when cloud archive is enabled (LP: #1836258). -- Corey Bryant Fri, 12 Jul 2019 10:10:04 -0400 ** Changed in: software-properties (Ubuntu Bionic) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1835911 Title: Handle applying status Status in software-properties package in Ubuntu: Fix Released Status in software-properties source package in Bionic: Fix Released Bug description: * Impact Sometime the livepatch status goes through an 'applying' intermediate value which can confuse the UI which then reports an non existing error * Test case Enable livepatch, go to software-properties->livepatch, check that the status matches the one reported by 'canonical-livepatch status' on a command line * Regression potential The change is simply adding an extra value to the list of handled status, check that the reporting is correct To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1835911/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1836258] Re: Update hyperlink when enabling UCA
This bug was fixed in the package software-properties - 0.96.20.9 --- software-properties (0.96.20.9) xenial; urgency=medium * cloudarchive: Update outdated WEB_LINK that is presented when cloud archive is enabled (LP: #1836258). -- Corey Bryant Fri, 12 Jul 2019 10:15:23 -0400 ** Changed in: software-properties (Ubuntu Xenial) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1836258 Title: Update hyperlink when enabling UCA Status in software-properties package in Ubuntu: Fix Released Status in software-properties source package in Xenial: Fix Released Status in software-properties source package in Bionic: Fix Released Status in software-properties source package in Eoan: Fix Released Bug description: [Impact] When enabling UCA a hyperlink is printed: $ sudo add-apt-repository cloud-archive:train-proposed Ubuntu Cloud Archive for OpenStack Train [proposed] More info: https://wiki.ubuntu.com/ServerTeam/CloudArchive Press [ENTER] to continue or Ctrl-c to cancel adding it. The hyperlink redirects to: https://wiki.ubuntu.com/OpenStack/CloudArchive so it should just be corrected at the source: https://git.launchpad.net/ubuntu/+source/software- properties/tree/softwareproperties/cloudarchive.py#n50 [Test Case] The "More info:" link should be https://wiki.ubuntu.com/OpenStack/CloudArchive, for example: root@b1:~# sudo add-apt-repository cloud-archive:queens Ubuntu Cloud Archive for OpenStack Queens More info: https://wiki.ubuntu.com/OpenStack/CloudArchive Press [ENTER] to continue or Ctrl-c to cancel adding it. [Regression Potential] This change is extremely minimal as it only updates a string that points to a wiki URL. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1836258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1836258] Update Released
The verification of the Stable Release Update for software-properties has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1836258 Title: Update hyperlink when enabling UCA Status in software-properties package in Ubuntu: Fix Released Status in software-properties source package in Xenial: Fix Released Status in software-properties source package in Bionic: Fix Released Status in software-properties source package in Eoan: Fix Released Bug description: [Impact] When enabling UCA a hyperlink is printed: $ sudo add-apt-repository cloud-archive:train-proposed Ubuntu Cloud Archive for OpenStack Train [proposed] More info: https://wiki.ubuntu.com/ServerTeam/CloudArchive Press [ENTER] to continue or Ctrl-c to cancel adding it. The hyperlink redirects to: https://wiki.ubuntu.com/OpenStack/CloudArchive so it should just be corrected at the source: https://git.launchpad.net/ubuntu/+source/software- properties/tree/softwareproperties/cloudarchive.py#n50 [Test Case] The "More info:" link should be https://wiki.ubuntu.com/OpenStack/CloudArchive, for example: root@b1:~# sudo add-apt-repository cloud-archive:queens Ubuntu Cloud Archive for OpenStack Queens More info: https://wiki.ubuntu.com/OpenStack/CloudArchive Press [ENTER] to continue or Ctrl-c to cancel adding it. [Regression Potential] This change is extremely minimal as it only updates a string that points to a wiki URL. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1836258/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1840045] Re: Software & Updates > Other Software > Scroll widget jumps
** Project changed: launchpad => software-properties (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1840045 Title: Software & Updates > Other Software > Scroll widget jumps Status in software-properties package in Ubuntu: New Bug description: When I click a checkbox next to a software source, the scroll widget jumps to the top. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1840045/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1840045] [NEW] Software & Updates > Other Software > Scroll widget jumps
You have been subscribed to a public bug: When I click a checkbox next to a software source, the scroll widget jumps to the top. ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New -- Software & Updates > Other Software > Scroll widget jumps https://bugs.launchpad.net/bugs/1840045 You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1838370] Re: slapd segfault on filter parse error
** Description changed:
- Impact
- --
+ [Impact]
Users willing to use the slapd rwm overlay will face a slapd
segmentation fault when trying to rewrite some rules. Backporting this
fix will allow users using stable releases to take advantage of this
feature without crashing slapd. This issue was fixed by upstream not
freeing the rwm overlay filter memory without prior checking.
- Test Case
- -
+ [Test Case]
In this test case, the rwm overlay will be used and a rule will be
created to deny any search request for uid=root, then the 'ldapsearch'
will be invoked to trigger the failure. It is important to mention that
the 'ldapsearch' command should fail regardless the presence of the bug
in the package, the target here is the slapd crash. To reproduce this
bug one can follow the procedure below in Ubuntu xenial, bionic or
disco:
$ sudo apt-get update
-
Use debconf to pre-seed slapd questions before install it:
$ debconf-set-selections << EOF
slapd slapd/no_configuration boolean false
slapd slapd/domain string example.com
slapd shared/organization string example.com
slapd slapd/password1 password test
slapd slapd/password2 password test
slapd slapd/backend select MDB
slapd slapd/move_old_database boolean false
EOF
$ sudo apt-get install slapd ldap-utils -y
-
Create a file called 'add-rwm.ldif' with the following content:
$ cat add-rwm.ldif
dn: cn=module{0},cn=config
changetype: modify
add: olcModuleLoad
olcModuleLoad: rwm
dn: olcOverlay=rwm,olcDatabase={1}mdb,cn=config
changetype: add
objectClass: olcOverlayConfig
objectClass: olcRwmConfig
olcOverlay: rwm
olcRwmRewrite: {0} rwm-rewriteEngine "on"
olcRwmRewrite: {1} rwm-rewriteContext "searchFilter"
olcRwmRewrite: {2} rwm-rewriteRule "(.*)(uid=root)(.*)" "$1$2$3" "#"
With this file in place, run:
$ sudo ldapadd -Q -Y EXTERNAL -H ldapi:/// -f add-rwm.ldif
Now, to trigger the crash:
$ ldapsearch -x -h localhost -b dc=example,dc=com -LLL uid=root
Server is unwilling to perform (53)
Additional information: searchFilter/searchFilterAttrDN massage error
-
- slapd process will die, and /var/crash will have a crash file for slapd. You
can run the following command to confirm the error:
+ slapd process will die, and /var/crash will have a crash file for slapd.
+ You can run the following command to confirm the error:
$ cat /var/log/syslog | grep filter_free
Aug 9 19:51:05 popular-gorilla slapd[1479]: filter_free: unknown filter
type=28530
-> Expected behavior
In this test case, as mentioned before, the 'ldapsearch' command should
fail but the 'slapd' process should not die. As result, we don't expect
a slapd crash report in /var/crash directory.
-
- Regression Potential
-
+ [Regression Potential]
Since the fix is a patch provided by upstream (reviewed by maintainers
and us) simple mistakes like typos are not expected. The patch impacts
only the rwm module which is not loaded by default. So any regression
would affect only the users that make use of this overlay. If an user is
not using rwm overlay and is facing any issue, it should be related to
other problems related to LDAP directory services.
-
[Original message]
Hello!
We have faced slapd crash, seems an attacker was trying to brute force one
of our services and uid parsing failures caused slapd crash:
Jul 26 18:59:47 slapd[1252]: conn=1466 op=13 SRCH
base="ou=test,dc=test,dc=com" scope=2 deref=0
filter="(&(uid=aistar123<>!n)(objectClass=posixAccount)(uid=*)(&(uidNumber=*)(!(uidNumber=0"
Jul 26 18:59:47 slapd[1252]: conn=1466 op=13 SRCH attr=objectClass uid
userPassword uidNumber gidNumber gecos homeDirectory loginShell
krbPrincipalName cn memberOf modifyTimestamp modifyTimestamp
shadowLastChange shadowMin shadow
Max shadowWarning shadowInactive shadowExpire shadowFlag krbLastPwdChange
krbPasswordExpiration pwdAttribute authorizedService accountExpires
userAccountControl nsAccountLock host loginDisabled loginExpirationTime
loginAllowedTimeMap sshPublic
Key
Jul 26 18:59:47 slapd[1252]: conn=1466 op=13 SEARCH RESULT tag=101 err=0
nentries=0 text=massaged filter parse error
Jul 26 18:59:47 kernel: [ 9441.554161] slapd[2367]: segfault at 18 ip
7fc8d18ec512 sp 7fc8889e2810 error 4 in libc-2.23.so
[7fc8d1868000+1c]
Another faulty filter example:
filter="(&(uid=sql<>?)(objectClass=posixAccount)(&(uidNumber=*)(!(uidNumber=0"
filter="(&(uid=fugeone<>?123)(objectClass=posixAccount)(uid=*)(&(uidNumber=*)(!(uidNumber=0"
$ lsb_release -rd
Description: Ubuntu 16.04.5 LTS
Release: 16.04
$ slapd -VVV
@(#) $OpenLDAP: slapd (Ubuntu) (May 22 2018 13:54:12) $
buildd@lcy01-amd64-019
:/build/openldap-t_Ta0O/openldap-2.4.42+dfsg/debian/build/servers/slapd
Included static backends:
config
ldif
$ apt-cache
[Touch-packages] [Bug 1815172] Re: [bionic] drm/i915: softpin broken, needs to be fixed for 32bit mesa
** Changed in: linux (Ubuntu Bionic) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1815172 Title: [bionic] drm/i915: softpin broken, needs to be fixed for 32bit mesa Status in Mesa: Fix Released Status in linux package in Ubuntu: Fix Released Status in mesa package in Ubuntu: Fix Released Status in linux source package in Bionic: Fix Committed Status in mesa source package in Bionic: Fix Committed Status in linux source package in Cosmic: Won't Fix Status in mesa source package in Cosmic: Fix Released Bug description: [Impact] Several schools reported black screens after normally updating their Ubuntu boxes from 18.0.5-0ubuntu0~18.04.1 to 18.2.2-0ubuntu1~18.04.1. Downgrading mesa fixes the problem. lspci: 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:1912] (rev 06) Subsystem: ASUSTeK Computer Inc. HD Graphics 530 [1043:8694]Kernel modules: i915 Unfortunately I can't find a lot of useful information, here are some bits: * systemctl --failed says "gpu-manager" and "lightdm" have failed * Xorg.log is clean: https://termbin.com/6l2b * dmesg too: https://termbin.com/ip4e * It happens on lightdm/MATE, I don't know about Ubuntu GNOME. * If one runs `xinit` from ssh, it fails with: i965: Failed to submit batchbuffer: Invalid argument This is caused by mesa assuming that soft-pinning on GEN8+ is working since kernel 4.5, but in fact this issue wasn't fixed until 4.19.3. So a proper fix would be to backport commits from 4.19.3/4.20 to fix GTT sizes/pin flags, but that's left for future. [Test case] install fixed mesa or kernel, check that the regression is fixed [Regression potential] mesa: shouldn't be any, it just reverts the change to always soft-pin (TODO kernel: adds commits from upstream stable, which have been well tested upstream by now) To manage notifications about this bug go to: https://bugs.launchpad.net/mesa/+bug/1815172/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 945448] Re: add toolbar commands pane shrinks, disappears
This release of Ubuntu is no longer receiving maintenance updates. If this is still an issue on a maintained version of Ubuntu please let us know. ** Changed in: libreoffice (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+2.0 in Ubuntu. https://bugs.launchpad.net/bugs/945448 Title: add toolbar commands pane shrinks, disappears Status in LibreOffice: Won't Fix Status in One Hundred Papercuts: Invalid Status in gtk+2.0 package in Ubuntu: New Status in libreoffice package in Ubuntu: Incomplete Bug description: 1) lsb_release -rd Description: Ubuntu 11.10 Release: 11.10 2) apt-cache policy libreoffice-writer libreoffice-writer: Installed: 1:3.5.0-1ubuntu3~oneiric1 Candidate: 1:3.5.0-1ubuntu3~oneiric1 Version table: *** 1:3.5.0-1ubuntu3~oneiric1 0 500 http://ppa.launchpad.net/libreoffice/ppa/ubuntu/ oneiric/main i386 Packages 100 /var/lib/dpkg/status 1:3.4.4-0ubuntu1 0 500 http://in.archive.ubuntu.com/ubuntu/ oneiric-updates/main i386 Packages 1:3.4.3-3ubuntu2 0 500 http://in.archive.ubuntu.com/ubuntu/ oneiric/main i386 Packages See attached image. Steps to reproduce: 1. Go to Tools > Customise > Toolbars, and click Add. 2. Move to a toolbar that does not have enough elements to fill the pane, e.g. Data. Now back to something that has, e.g. Application. 3. Keep switching between toolbars. 4. Watch the commands pane gradually shrink and then disappear. To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/945448/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1833114] Re: print page dialog latency when trying to cancel or to save
** Also affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1833114 Title: print page dialog latency when trying to cancel or to save Status in chromium-browser package in Ubuntu: New Status in gtk+3.0 package in Ubuntu: New Bug description: Since less than a month ago, using the print page dialog (which for me defaults to saving as PDF) is outlandishly slow. Once opened, if I try to close it (click cancel / press Esc) or to use it (click Save or press Enter), there is no visible response, and my system hangs for 10 seconds. After that though, the operation concludes successfully and things return to normal. This did not used to happen. Closing or submitting the print-to-PDF used to result in the pop-up window closing immediately and the browser regaining responsiveness. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: chromium-browser 74.0.3729.169-0ubuntu0.19.04.1 ProcVersionSignature: Ubuntu 5.0.0-16.17-generic 5.0.8 Uname: Linux 5.0.0-16-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 CurrentDesktop: ubuntu:GNOME DRM.card0-DP-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-DP-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-DP-5: enabled: enabled dpms: On status: connected edid-base64: AP///wAEchAEyHEQUQsZAQSlRyh4PiVfqFRNnyUOT1O/74BxT4FAgYCBwIEAlQCzANHATdAAoPBwPoAwIDUAxY8hAAAaBHQAMPJwWoCwWIoAxY8hAAAa/QAdTB+gPAEKICAgICAg/ABCMzI2SEsKICAgICAgAQwCAxzhT5ACAwQFBgcBERITFBUWHyMJBweDAQAAAjqAGHE4LUBYLEUAxY8hAAAeAR2AGHEcFiBYLCUAxY8hAACeAR0AclHQHiBuKFUAxY8hAAAejArQiiDgLRAQPpYAxY8hAAAYVl4AoKCgKVAwIDUAxI8hAAAa modes: 3840x2160 3840x2160 2560x1440 1920x1080 1920x1080 1920x1080 1920x1080 1680x1050 1280x1024 1280x1024 1440x900 1280x960 1280x800 1152x864 1280x720 1280x720 1280x720 1280x720 1024x768 1024x768 1024x768 832x624 800x600 800x600 800x600 800x600 720x576 720x576 720x480 720x480 720x480 720x480 720x480 640x480 640x480 640x480 640x480 640x480 640x480 720x400 DRM.card0-DP-6: enabled: disabled dpms: On status: connected edid-base64: AP///wAQrAngTEFNMAkPAQPOKxt46gGVo1dMnCUSUFSlSwCBgHFPAQEBAQEBAQEBAQEBfC6QoGAaHkAwIDYAsg4RAAAa/wBUNjEzMDUzMjBNQUwK/QA4Sx5TDgAKICAgICAg/ABERUxMIDIwMDVGUFcKAAM= modes: 1680x1050 1280x1024 1280x1024 1152x864 1024x768 1024x768 800x600 800x600 640x480 640x480 720x400 DRM.card0-DP-7: enabled: disabled dpms: On status: disconnected edid-base64: modes: DRM.card0-HDMI-A-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-HDMI-A-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-eDP-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAGrz0TACYXAQSVHxF4AoflpFZQniYNUFQBAQEBAQEBAQEBAQEBAQEBFDeAuHA4JEAQED4ANa0QAAAYDwAg/gBBVU8KICAgICAgICAg/gBCMTQwSEFOMDEuMyAKAHo= modes: 1920x1080 Date: Mon Jun 17 14:03:12 2019 Desktop-Session: 'ubuntu' '/etc/xdg/xdg-ubuntu:/etc/xdg' '/usr/share/ubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop' DetectedPlugins: EcryptfsInUse: Yes Env: 'None' 'None' InstallationDate: Installed on 2019-01-24 (144 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: Load-Avg-1min: 3.09 Load-Processes-Running-Percent: 0.1% MachineType: LENOVO 20BXCTO1WW ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-16-generic root=UUID=a6081f39-700f-4698-bda4-464e53d9d229 ro quiet splash vt.handoff=1 SourcePackage: chromium-browser UpgradeStatus: Upgraded to disco on 2019-05-29 (19 days ago) dmi.bios.date: 09/13/2017 dmi.bios.vendor: LENOVO dmi.bios.version: JBET66WW (1.30 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BXCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJBET66WW(1.30):bd09/13/2017:svnLENOVO:pn20BXCTO1WW:pvrThinkPadT450s:rvnLENOVO:rn20BXCTO1WW:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T450s dmi.product.name: 20BXCTO1WW dmi.product.sku: LENOVO_MT_20BX_BU_Think_FM_ThinkPad T450s dmi.product.version: ThinkPad T450s dmi.sys.vendor: LENOVO modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1833114/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to :
[Touch-packages] [Bug 1839826] Re: Newly added Google accounts don't work: The specified session has been invalidated for some reason.
This bug was fixed in the package glib-networking - 2.61.90-1 --- glib-networking (2.61.90-1) experimental; urgency=medium * New upstream release - Fix translations of certain error messages - Improve certain handshake error messages - Fix regressions introduced in 2.61.1 (LP: #1839826) -- Iain Lane Mon, 12 Aug 2019 12:37:52 +0100 ** Changed in: glib-networking (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to glib-networking in Ubuntu. https://bugs.launchpad.net/bugs/1839826 Title: Newly added Google accounts don't work: The specified session has been invalidated for some reason. Status in glib-networking package in Ubuntu: Fix Released Bug description: This is my GOA/EDS version but it's likely to have been broken by something else I think: gnome-online-accounts: Installed: 3.32.0-1ubuntu1 Candidate: 3.32.0-1ubuntu1 Version table: *** 3.32.0-1ubuntu1 500 500 file:/srv/mirrors/ubuntu eoan/main amd64 Packages 100 /var/lib/dpkg/status evolution-data-server: Installed: 3.32.2-2 Candidate: 3.32.2-2 Version table: *** 3.32.2-2 500 500 file:/srv/mirrors/ubuntu eoan/main amd64 Packages 100 /var/lib/dpkg/status Existing accounts work fine, but if I add a new account using gnome- control-center or gnome-calendar, then it doesn't work. Calendars don't sync and Evolution can't retrieve mail/contacts, etc. In the journal there is: Aug 12 12:00:37 raleigh.home.orangesquash.org.uk gnome-calendar[8276]: source_credentials_required_cb: Failed to authenticate 'i...@orangesquash.org.uk': Error reading data from TLS socket: The specified session has been invalidated for some reason. I think that's an error from glib-networking. I tried on eoan only, so far (a clean system and my real one). As first steps maybe we need to try disco, and maybe also downgrading glib-networking. Or upgrading it: there is a new release waiting to be packaged. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib-networking/+bug/1839826/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839373] Re: Modernize CD-ROM/DVD options
** Changed in: software-properties (Ubuntu) Importance: Undecided => Wishlist -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1839373 Title: Modernize CD-ROM/DVD options Status in software-properties package in Ubuntu: New Bug description: "Software & Updates" has CD/DVD options, which is (a) antiquated and (b) unclear how it works. I understand it likely works by standardized mount paths, but most users nowadays will be installing with a USB stick which has no support. Imagine a new user who needs to install custom broadlink drivers from USB stick, but there's no way to easily configure the package manager to do it. That was my situation, I ended up finding the .deb file on the USB manually. I think you should just rework all this as an "Installation Media" option, and search all mounted paths for an Ubuntu signature. (I originally posted in the wrong place and I was directed to post here https://bugs.launchpad.net/ubuntu/+source/gnome- software/+bug/1839212) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1839373/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839710] Re: package libibus-1.0-5:amd64 1.5.11-1ubuntu2 failed to install/upgrade: package libibus-1.0-5:amd64 is not ready for configuration cannot configure (current status 'h
Can you try executing the following command in a terminal: sudo apt install --reinstall libibus-1.0-5 ** Changed in: ibus (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1839710 Title: package libibus-1.0-5:amd64 1.5.11-1ubuntu2 failed to install/upgrade: package libibus-1.0-5:amd64 is not ready for configuration cannot configure (current status 'half-installed') Status in ibus package in Ubuntu: Incomplete Bug description: reinstall ubuntu to dell G3 15 ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libibus-1.0-5:amd64 1.5.11-1ubuntu2 ProcVersionSignature: Ubuntu 4.13.0-1028.31-oem 4.13.16 Uname: Linux 4.13.0-1028-oem x86_64 ApportVersion: 2.20.1-0ubuntu2.18 AptOrdering: libglib2.0-0: Install libglib2.0-0: Configure libglib2.0-bin: Configure libibus-1.0-5: Configure NULL: ConfigurePending Architecture: amd64 Date: Sat Aug 10 14:23:49 2019 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-xenial-amd64-osp1-20171027-1 DuplicateSignature: package:libibus-1.0-5:amd64:1.5.11-1ubuntu2 Setting up libglib2.0-bin (2.48.2-0ubuntu4.4) ... dpkg: error processing package libibus-1.0-5:amd64 (--configure): package libibus-1.0-5:amd64 is not ready for configuration ErrorMessage: package libibus-1.0-5:amd64 is not ready for configuration cannot configure (current status 'half-installed') InstallationDate: Installed on 2019-08-09 (0 days ago) InstallationMedia: Ubuntu 16.04 "Xenial" - Build amd64 LIVE Binary 20171027-10:57 RelatedPackageVersions: dpkg 1.18.4ubuntu1.5 apt 1.2.32 SourcePackage: ibus Title: package libibus-1.0-5:amd64 1.5.11-1ubuntu2 failed to install/upgrade: package libibus-1.0-5:amd64 is not ready for configuration cannot configure (current status 'half-installed') UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1839710/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1839123] Comment bridged from LTC Bugzilla
--- Comment From heinz-werner_se...@de.ibm.com 2019-08-13 03:43 EDT--- IBM Bugzilla status -> closed, Fix Released with Eoan -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gzip in Ubuntu. https://bugs.launchpad.net/bugs/1839123 Title: [19.10 FEAT] gzip compression improvements addl. patch required Status in Ubuntu on IBM z Systems: Fix Released Status in gzip package in Ubuntu: Fix Released Bug description: This patch (unfortunately not yet upstream acepted) is needed on top of LP 1825350 (https://bugs.launchpad.net/ubuntu/+source/gzip/+bug/1825350), and fixes a serious bug. It was already developed and published a while ago: https://lists.gnu.org/archive/html/bug-gzip/2019-07/msg0.html This patch fixes data corruption issues, and thus is very important. Unfortunately, so far it has been ignored (there is not much going on on gzip mailing list in general). I would like to ask you to pick it up for the distro. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1839123/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1838322] Re: Support Japanese new era "令和 (Reiwa)"
** Changed in: icu (Ubuntu) Importance: Undecided => Medium ** Changed in: icu (Ubuntu Xenial) Importance: Undecided => Medium ** Changed in: icu (Ubuntu Bionic) Importance: Undecided => Medium ** Changed in: icu (Ubuntu Disco) Importance: Undecided => Medium -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to icu in Ubuntu. https://bugs.launchpad.net/bugs/1838322 Title: Support Japanese new era "令和 (Reiwa)" Status in icu package in Ubuntu: Fix Released Status in icu source package in Xenial: New Status in icu source package in Bionic: New Status in icu source package in Disco: New Bug description: [Background] Many packages are affected by the requirement to support the new era "Reiwa" (令和） This is the meta bug to track packages that need fixes; which packages have already been SRUd to previous releases, how to prioritize the work needed, and general test cases for verifying that things are working as expected. [Impact] Users who run Ubuntu in Japanese. [Test cases] Unicode data embedded into icu should include REIWA like it includes HEISEI. == Date conversion == On applications that support writing dates in long form, or with symbols to denote era (either in X00.00.00 format or in GG1G5G1G format (G- glyph; X- character): 1) Enable date formatting in each of the above formats that are supported (long form or symbols) 2) Type in '2019/05/01' to be formatted, verify that it shows as "令和1年5月1日" or "R1.05.01" 3) Type in '2019/04/30' to be formatted, verify that it shows as "平成31年4月30日" or "H31.4.30" == Character maps / font support == 1) Search for character "SQUARE ERA NAME" 2) Verify that the results include at least "SQUARE ERA NAME HEISEI" and "SQUARE ERA NAME REIWA" (there should also be Syouwa, Taisyou and Meizi), and that the glyphs are readable: - SQUARE ERA NAME HEISEI: ㍻ - SQUARE ERA NAME REIWA: 令和 (in a single glyph) Display of the Reiwa square glyph is font-specific; it may show simply as a empty square or a square with hex characters. If that is the case, the unicode data supports the new character, but the selected font does not include the new glyph. [Regression potential] This is a potentially large change as it impacts font display, character sets as well as date conversions. As such, extreme care should be taken to ensure that regressions are avoided, such that dates previous to May 1, 2019 continue to display as before, and dates onward are displayed with the new era symbols. The included test cases account for verifying the continued behavior or previous dates. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/icu/+bug/1838322/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
