[Touch-packages] [Bug 1934931] Re: (X)ubuntu 20.04: GUFW and MS-Teams slow down traffic intermittently
Hi, Gufw can't affect that behavior. I think is an ufw issue. Best regards. ** Also affects: ufw (Ubuntu) Importance: Undecided Status: New ** Changed in: gui-ufw Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1934931 Title: (X)ubuntu 20.04: GUFW and MS-Teams slow down traffic intermittently Status in Gufw: Invalid Status in ufw package in Ubuntu: New Bug description: Thanks for Gufw! inxi -S output: Xubuntu standard LTS installation - Kernel: 5.4.0-77-generic x86_64 bits: 64 Desktop: Xfce 4.14.2 Distro: Ubuntu 20.04.2 LTS (Focal Fossa). GUFW 20.04.1, MS Teams 1.4.00.13653 (64-Bit) (all up to date at the time of this report). ** Problem: 250 Mbit LAN connection slowing down *intermittently*, but reproducible, to a crawl of 300 kbit or less if Gufw is activated parallel to MS teams. * Gufw is used with only basic settings provided after installation (in:denied/out:allowed and nothing else set, no further rules). * There has not to be any active call in teams, just running it seems to cause the problem after a while (<5 minutes). * After congestion for some time (minutes), the system may recover to full speed again, only to succumb again after a few minutes. * Other parallel running programs' connections are slowed down as well in accordance, e.g. parallel samba file sharing download is affected as well. * Stopping teams restores the connection speed after a short while (~1 minute). * Parallel connections to the LAN(router) are not inhibited, it is just the one computer. Teams seems to switch ports after restarting (UDP6/~34nnn-4). I set up a range to be allowed within ports used by teams (e.g. 3:5, allow in/outbound) to no avail, connections dropped still to low speed. Thanks and regards, Christoph To manage notifications about this bug go to: https://bugs.launchpad.net/gui-ufw/+bug/1934931/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1713313] Re: Unable to launch pkexec'ed applications on Wayland session
Hi, Would this hack fix the issue? (Add/Remove xhost +si:localuser:root to the launcher) I don't know if this could means something dangerous in Wayland. https://bazaar.launchpad.net/~costales/gui-ufw/wayland/revision/19 Thanks in advance. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to gdebi in Ubuntu. https://bugs.launchpad.net/bugs/1713313 Title: Unable to launch pkexec'ed applications on Wayland session Status in Back In Time: Fix Released Status in Boot-Info: Fix Committed Status in Boot-Repair: Fix Committed Status in GNOME Terminal: New Status in HPLIP: New Status in Settings editor for LightDM GTK+ Greeter: New Status in OS-Uninstaller: Fix Committed Status in Y PPA Manager: New Status in apport package in Ubuntu: New Status in apt-offline package in Ubuntu: New Status in backintime package in Ubuntu: Confirmed Status in budgie-welcome package in Ubuntu: Invalid Status in caja-admin package in Ubuntu: New Status in cinnamon package in Ubuntu: Invalid Status in ettercap package in Ubuntu: Confirmed Status in gdebi package in Ubuntu: Confirmed Status in gdm3 package in Ubuntu: Won't Fix Status in gnunet-gtk package in Ubuntu: Confirmed Status in gparted package in Ubuntu: Invalid Status in gui-ufw package in Ubuntu: Confirmed Status in guidedog package in Ubuntu: New Status in hplip package in Ubuntu: Confirmed Status in italc package in Ubuntu: New Status in laptop-mode-tools package in Ubuntu: New Status in lightdm-gtk-greeter-settings package in Ubuntu: Confirmed Status in nautilus-admin package in Ubuntu: New Status in needrestart-session package in Ubuntu: Confirmed Status in nemo package in Ubuntu: Confirmed Status in policykit-1 package in Ubuntu: Invalid Status in scanmem package in Ubuntu: Invalid Status in scap-workbench package in Ubuntu: Confirmed Status in sirikali package in Ubuntu: Fix Released Status in synaptic package in Ubuntu: Confirmed Status in thunar package in Ubuntu: New Status in tuned package in Ubuntu: New Status in ubuntustudio-controls package in Ubuntu: Fix Released Status in ubuntustudio-default-settings package in Ubuntu: Invalid Status in update-notifier package in Ubuntu: New Status in xdiagnose package in Ubuntu: Confirmed Status in xubuntu-default-settings package in Ubuntu: Invalid Status in zulucrypt package in Ubuntu: Fix Released Bug description: * Main upstream discussion & fixes example to deal with wayland: https://bugzilla.gnome.org/show_bug.cgi?id=776437 * Steps to reproduce: 1. Install Ubuntu 17.10 2. Install backintime-qt4 or gparted application from above list (full may be acquired from https://codesearch.debian.net/search?q=pkexec+filetype%3Adesktop+path%3A*%2Fapplications%2F*=1=4 ) 3a. Try to launch backintime-qt4 from shortcut "Back In Time (root)" (located in /usr/share/applications/backintime-qt4-root.desktop, it uses pkexec ($ cat /usr/share/applications/backintime-qt4-root.desktop | grep Exec Exec=pkexec backintime-qt4) 3b. Try to launch Gparted from shortcut "GParted" (located in /usr/share/applications/gparted.desktop, it uses gparted-pkexec) 4a.1. Back In Time does not start from GUI. 4a.2. Back In Time shows error message in console: 4b. gparted-pkexec does not start, reports error $ gparted-pkexec Created symlink /run/systemd/system/-.mount → /dev/null. Created symlink /run/systemd/system/run-user-1000.mount → /dev/null. Created symlink /run/systemd/system/run-user-121.mount → /dev/null. Created symlink /run/systemd/system/tmp.mount → /dev/null. No protocol specified (gpartedbin:12831): Gtk-WARNING **: cannot open display: :0 Removed /run/systemd/system/-.mount. Removed /run/systemd/system/run-user-1000.mount. Removed /run/systemd/system/run-user-121.mount. Removed /run/systemd/system/tmp.mount. $ pkexec backintime-qt4 Back In Time Version: 1.1.12 Back In Time comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type `backintime --license' for details. No protocol specified app.py: cannot connect to X server :0 Expected results: * backintime-qt4 may be run as root Actual results: * unable to run backintime-qt4 as root Workaround: * setting "xhost +si:localuser:root" helps. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: backintime-qt4 1.1.12-2 ProcVersionSignature: Ubuntu 4.12.0-11.12-generic 4.12.5 Uname: Linux 4.12.0-11-generic i686 ApportVersion: 2.20.6-0ubuntu7 Architecture: i386 CurrentDesktop: GNOME Date: Sun Aug 27 14:23:14 2017 InstallationDate: I
[Touch-packages] [Bug 1785272] Re: ufw and gufw out of order
This is an ufw issue. I'll derivate to that project. ** Project changed: gui-ufw => ufw (Ubuntu) ** Package changed: ufw (Ubuntu) => ufw -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1785272 Title: ufw and gufw out of order Status in ufw: New Bug description: Hello, the sudo ufw status command gives: WARN: / is writable for everyone! WARN: / is writable for the group! and nothing else in the "flag" page of gufw. the "ufw" activity normally appears here! with "gufw" can not enable or disable "ufw". for that I have to use sudo ufw cds and enable or disable or status ... finally the comparison of the screen "gufw" with the result of the cdes gives results totally reversed !!! after complete désisntallation then reinstallation the result is always the same. it is to understand nothing more. i have two screenshots that highlight this malfunction but i do not know how to attach them to this message ... thanks for the help expected. greetings. Ray. then, after here is the result of the order: sudo systemctl status ufw.service ● ufw.service - Uncomplicated firewall Loaded: /lib/systemd/system/ufw.service; enabled; vendor preset: enabled Active: active (exited) since Fri 2018-08-03 13:39:12 CEST; 21min ago Process: 250 ExecStart = / lib / ufw / ufw-init start quiet (code = exited, status = 0 / SUCCESS) Main PID: 250 (code = exited, status = 0 / SUCCESS) CGroup: /system.slice/ufw.service August 03 13:39:12 ac2i-W240EU-W250EUQ-W270EUQ systemd [1]: Started Uncomplicated firewall. Warning: Journal has been rotated since it was started. Log output is incomplete or unavailable. also, after Re, actually but the operation via the gufw interface gives weird results. you can see the 2 screens images obtained thanks to the ufw cdes and the gufw screen ... here is the direct link for access to the shared folder: https://app.box.com/s/3q29ca27oebk788xqxlbjy2z4vd6idl6 why say ufw is useless? faced with these problems I tried to install "firestarter" without result ... I think a firewall is a necessary evil nowadays. thank you. To manage notifications about this bug go to: https://bugs.launchpad.net/ufw/+bug/1785272/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1817527] Re: ufw status problem
** Project changed: gui-ufw => ufw (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1817527 Title: ufw status problem Status in ufw package in Ubuntu: New Bug description: I recently have a spontaneous problem when running the command "service ufw status" and below picture is a result that shows me "active (exited)" status how can fix it ??? thanks a lot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ufw/+bug/1817527/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1784937] Re: Add GRE protocol
** Project changed: gui-ufw => ufw (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1784937 Title: Add GRE protocol Status in ufw package in Ubuntu: New Bug description: Enabling firewall will prevent connecting to remote PPTP server. We need a way to enable the GRE protocol using GUFW. Only TCP and UDP are available to selection for now, even in the advanced screen. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ufw/+bug/1784937/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1713313] Re: Unable to launch pkexec'ed applications on Wayland session
** Changed in: gui-ufw (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to policykit-1 in Ubuntu. https://bugs.launchpad.net/bugs/1713313 Title: Unable to launch pkexec'ed applications on Wayland session Status in apport package in Ubuntu: New Status in apt-offline package in Ubuntu: New Status in backintime package in Ubuntu: Confirmed Status in budgie-welcome package in Ubuntu: Invalid Status in caja-admin package in Ubuntu: New Status in cinnamon package in Ubuntu: Invalid Status in ettercap package in Ubuntu: Confirmed Status in gdebi package in Ubuntu: Confirmed Status in gnunet-gtk package in Ubuntu: Confirmed Status in gparted package in Ubuntu: Invalid Status in gui-ufw package in Ubuntu: Confirmed Status in guidedog package in Ubuntu: New Status in hplip package in Ubuntu: Confirmed Status in italc package in Ubuntu: New Status in laptop-mode-tools package in Ubuntu: New Status in lightdm-gtk-greeter-settings package in Ubuntu: Confirmed Status in nautilus-admin package in Ubuntu: New Status in needrestart-session package in Ubuntu: Confirmed Status in nemo package in Ubuntu: Confirmed Status in policykit-1 package in Ubuntu: Invalid Status in scanmem package in Ubuntu: New Status in scap-workbench package in Ubuntu: Confirmed Status in sirikali package in Ubuntu: New Status in synaptic package in Ubuntu: Confirmed Status in thunar package in Ubuntu: New Status in tuned package in Ubuntu: New Status in ubuntustudio-controls package in Ubuntu: New Status in ubuntustudio-default-settings package in Ubuntu: Invalid Status in update-notifier package in Ubuntu: New Status in xdiagnose package in Ubuntu: Confirmed Status in xubuntu-default-settings package in Ubuntu: Invalid Status in zulucrypt package in Ubuntu: New Bug description: Posting here what gnome says about porting to wayland, and their tests: GNOME Applications under Wayland GTK+ has a Wayland backend. If it was enabled at compile-time, you can run a GTK+ application under Wayland simply by: GDK_BACKEND=wayland gnome-calculator Applications that use Clutter or clutter-gtk also need the Clutter Wayland backend enabled: GDK_BACKEND=wayland CLUTTER_BACKEND=wayland cheese https://wiki.gnome.org/Initiatives/Wayland/Applications ==> so hope the settings are well set at compile time; maybe a rebuilt to get sure all apps are ok. Steps to reproduce: 1. Install Ubuntu 17.10 2. Install backintime-qt4 or gparted application from above list (full may be acquired from https://codesearch.debian.net/search?q=pkexec+filetype%3Adesktop+path%3A*%2Fapplications%2F*=1=4 ) 3a. Try to launch backintime-qt4 from shortcut "Back In Time (root)" (located in /usr/share/applications/backintime-qt4-root.desktop, it uses pkexec ($ cat /usr/share/applications/backintime-qt4-root.desktop | grep Exec Exec=pkexec backintime-qt4) 3b. Try to launch Gparted from shortcut "GParted" (located in /usr/share/applications/gparted.desktop, it uses gparted-pkexec) 4a.1. Back In Time does not start from GUI. 4a.2. Back In Time shows error message in console: 4b. gparted-pkexec does not start, reports error $ gparted-pkexec Created symlink /run/systemd/system/-.mount → /dev/null. Created symlink /run/systemd/system/run-user-1000.mount → /dev/null. Created symlink /run/systemd/system/run-user-121.mount → /dev/null. Created symlink /run/systemd/system/tmp.mount → /dev/null. No protocol specified (gpartedbin:12831): Gtk-WARNING **: cannot open display: :0 Removed /run/systemd/system/-.mount. Removed /run/systemd/system/run-user-1000.mount. Removed /run/systemd/system/run-user-121.mount. Removed /run/systemd/system/tmp.mount. $ pkexec backintime-qt4 Back In Time Version: 1.1.12 Back In Time comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type `backintime --license' for details. No protocol specified app.py: cannot connect to X server :0 Expected results: * backintime-qt4 may be run as root Actual results: * unable to run backintime-qt4 as root Workaround: * setting "xhost +si:localuser:root" helps. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: backintime-qt4 1.1.12-2 ProcVersionSignature: Ubuntu 4.12.0-11.12-generic 4.12.5 Uname: Linux 4.12.0-11-generic i686 ApportVersion: 2.20.6-0ubuntu7 Architecture: i386 CurrentDesktop: GNOME Date: Sun Aug 27 14:23:14 2017 InstallationDate: Installed on 2017-08-26 (0 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha i386 (20170826) PackageArchitecture: all SourcePackage: backintime
[Touch-packages] [Bug 1621294] Re: Toggling firewall is (too) slow
** Changed in: gui-ufw Status: New => Invalid ** Project changed: gui-ufw => ufw (Ubuntu) ** Changed in: ufw (Ubuntu) Status: Invalid => New ** Package changed: ufw (Ubuntu) => ufw -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ufw in Ubuntu. https://bugs.launchpad.net/bugs/1621294 Title: Toggling firewall is (too) slow Status in ufw: New Bug description: I have a laptop that runs reasonably fast. Yet, toggling the firewall on and off takes about four seconds - which is long enough to make the user wonder whether s/he has made the wrong gesture. Mint 18 Cinnamon. Gufu 16.04.1. Intel dual-core T7500 @ 2.20GHz, 8GB RAM, on an SSD. Fast Ethernet (75MBits) and reasonable (between 75 and 20Mbits) wifi. To manage notifications about this bug go to: https://bugs.launchpad.net/ufw/+bug/1621294/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1615413] [NEW] Ubuntu Phone lost resolution switching from front camera
Public bug reported: Steps: 1. Open camera with back camera. 2. Set resolution 20.7MP (4:3). 3. Set selfie (front) camera. 4. Set back camera again, bug > Resolution is 12MP (5:3). Sometimes I don't see it and I'm doing pictures in 12MP and not 20.7MP. Thanks in advance! ** Affects: camera-app (Ubuntu) Importance: Undecided Status: New ** Summary changed: - Ubuntu Phone lost resolution changing switching from front camera + Ubuntu Phone lost resolution switching from front camera -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1615413 Title: Ubuntu Phone lost resolution switching from front camera Status in camera-app package in Ubuntu: New Bug description: Steps: 1. Open camera with back camera. 2. Set resolution 20.7MP (4:3). 3. Set selfie (front) camera. 4. Set back camera again, bug > Resolution is 12MP (5:3). Sometimes I don't see it and I'm doing pictures in 12MP and not 20.7MP. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/camera-app/+bug/1615413/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1375215] Re: System runs out of memory - white screens frequently seen in web renderers
Thanks a lot Olivier for your support :) We'll try that |o/ -- Sent using Dekko from my Ubuntu device -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1375215 Title: System runs out of memory - white screens frequently seen in web renderers Status in Canonical System Image: Fix Released Status in oxide-qt package in Ubuntu: Invalid Status in webbrowser-app package in Ubuntu: Fix Released Bug description: [See latest comments for recent repro notes] krillin 14.09 #2 + all updates applied After running the system for a while (few minutes) the system runs out of memory and start killing processes. It is very visible with the webbrowser or webapps because it renders the page and displays a white page when oxide-render is killed. Although it is not specific to oxide, and any app are killed (address-book, system-settings, ...) You can clearly notice that other apps are being killed because when you switch to the app it's all blurry and take a while to reload, also it loses its state (for example, you lose the message you were writing in the messaging-app) There is no specific steps to reproduce. I have several scopes enabled (photos, nearby, news) You don't have to have tons of apps open to reproduce this. Launching the webbrowser or a webapps and navigating on the phone between the scopes and the open app seems enough for the system to start killing processes. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: liboxideqtcore0 1.2.0-0ubuntu1 [origin: Ubuntu RTM] Uname: Linux 3.4.67 armv7l ApportVersion: 2.14.7-0ubuntu1 Architecture: armhf Date: Mon Sep 29 12:51:34 2014 InstallationDate: Installed on 2014-09-24 (5 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140924-030204) SourcePackage: oxide-qt UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1375215/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1477838] Re: Crackling sound after playing audio and suspended
> than an annoying noise happening, which seems to be MX4 specific. @John: I have Nexus4, BQ E4.5 & MX4 and this is happening only in MX4. FYI, I flashed this week the MX4 and set the default notification sound, but same weird sound. A hug. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1477838 Title: Crackling sound after playing audio and suspended Status in arale: Confirmed Status in Canonical System Image: Confirmed Status in pulseaudio package in Ubuntu: Invalid Bug description: The Meizu MX4 is doing a weird "tic tic tic..." after receive a notification (from telegram, mail...) and it's suspended. -- When I press the screen lock button on the MX4 shortly after playing music or ending a phone call I hear a radio/fuzzy distorted noise coming from the phone. To make it stop I need to unlock and lock the screen again but this is not ideal. - When the screen is locked and the playing song is finished and waiting for a stopped signal, MX4 will do a weird lower sound. - TEST CASE (Thanks to Kamikaze) 1. Boot the device and wait until it suspends (black screen) 2. ssh to the device 3. Run from the command line: $ aplay /usr/share/sounds/alsa/Front_Left.wav 4. Repeat step 3 until you reproduce the issue (3 to 5 times) --- Original Case --- How to reproduce (Note this does not always work, the phone needs to be in some specific state yet to be determined) Ensure MX4 is not plugged into USB Call the MX4 and hear the ringtone Dismiss the call Push the power button to turn off the screen Tick Tick Tick Push the power button to turn on the screen hissing Push the power button to turn off the screen Tick Tick Tick etc It will not clear until you play another sound Does not happen in silent mode of course --from the dupe Aquaris E4.5 Steps to reproduce: 1. Start playing a podcast. 2. Switch to a different app. 3. Lock the screen. 4. Wait for the Podcast to finish. 5. Wait a bit longer. Expected results: No noise from speaker. Actual results: Soft white noise from speaker. It seems that some part of the audio subsystem is still switched on. I am concerned that this could be draining battery. Workaround: After the Podcast finishes, unlock the phone and switch back to the Podbird app. This causes the noise to stop. Comments: I noticed the same soft white noise continues a second or two after the phone plays any sound from any app, but then turns off. I presume there is some time out turning off some part of the audio subsystem. Presumably if there is a reason, it should happen even when the app causing the sound to play is not active. To manage notifications about this bug go to: https://bugs.launchpad.net/arale/+bug/1477838/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1375215] Re: System runs out of memory - white screens frequently seen in web renderers
Hi Olivier :) I found a behavior: Open uNav and put in background. Open it after 8hours and uNav will have a white screen (because it hasn't that webview anymore, I don't know why). I saw some apps, like Telegram, are reloaded when they come from background, but it is not a new fresh start. Appears the application reloads to itself (?). In uNav there is nothing for reload the webview. Am I missing an app cycle life? Thanks in advance!! Costales. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1375215 Title: System runs out of memory - white screens frequently seen in web renderers Status in Canonical System Image: Fix Released Status in oxide-qt package in Ubuntu: Invalid Status in webbrowser-app package in Ubuntu: Fix Released Bug description: [See latest comments for recent repro notes] krillin 14.09 #2 + all updates applied After running the system for a while (few minutes) the system runs out of memory and start killing processes. It is very visible with the webbrowser or webapps because it renders the page and displays a white page when oxide-render is killed. Although it is not specific to oxide, and any app are killed (address-book, system-settings, ...) You can clearly notice that other apps are being killed because when you switch to the app it's all blurry and take a while to reload, also it loses its state (for example, you lose the message you were writing in the messaging-app) There is no specific steps to reproduce. I have several scopes enabled (photos, nearby, news) You don't have to have tons of apps open to reproduce this. Launching the webbrowser or a webapps and navigating on the phone between the scopes and the open app seems enough for the system to start killing processes. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: liboxideqtcore0 1.2.0-0ubuntu1 [origin: Ubuntu RTM] Uname: Linux 3.4.67 armv7l ApportVersion: 2.14.7-0ubuntu1 Architecture: armhf Date: Mon Sep 29 12:51:34 2014 InstallationDate: Installed on 2014-09-24 (5 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140924-030204) SourcePackage: oxide-qt UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1375215/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1375215] Re: System runs out of memory - white screens frequently seen in web renderers
Hi Olivier :) > @Marcos: what do you mean by "uNav is generating a lot of > process/second"? uNav is doing a lot of calculations by second when you're driving. Then the CPU usage is so high. > IIRC I once suggested you to monitor the 'webProcessStatus' property of > the webview, and offer some user feedback when it’s killed or crashed. We have this log from users and experimented by myself: file:///opt/click.ubuntu.com/navigator.costales/0.59/qml/Main.qml:103: TypeError: Type error ubuntumirclient: Attempted to deliver an event to a non-existent window, ignoring. This is because the webview was killed and uNav doesn't find it. Regenerate the webview could be a solution, but it would lost a current route. A hug! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1375215 Title: System runs out of memory - white screens frequently seen in web renderers Status in Canonical System Image: Fix Released Status in oxide-qt package in Ubuntu: Invalid Status in webbrowser-app package in Ubuntu: Fix Released Bug description: [See latest comments for recent repro notes] krillin 14.09 #2 + all updates applied After running the system for a while (few minutes) the system runs out of memory and start killing processes. It is very visible with the webbrowser or webapps because it renders the page and displays a white page when oxide-render is killed. Although it is not specific to oxide, and any app are killed (address-book, system-settings, ...) You can clearly notice that other apps are being killed because when you switch to the app it's all blurry and take a while to reload, also it loses its state (for example, you lose the message you were writing in the messaging-app) There is no specific steps to reproduce. I have several scopes enabled (photos, nearby, news) You don't have to have tons of apps open to reproduce this. Launching the webbrowser or a webapps and navigating on the phone between the scopes and the open app seems enough for the system to start killing processes. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: liboxideqtcore0 1.2.0-0ubuntu1 [origin: Ubuntu RTM] Uname: Linux 3.4.67 armv7l ApportVersion: 2.14.7-0ubuntu1 Architecture: armhf Date: Mon Sep 29 12:51:34 2014 InstallationDate: Installed on 2014-09-24 (5 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140924-030204) SourcePackage: oxide-qt UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1375215/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1375215] Re: System runs out of memory - white screens frequently seen in web renderers
Hi, IMO this persists in RC-proposed. uNav has a white page when you return from another to it. uNav is generating a lot of process/second. Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1375215 Title: System runs out of memory - white screens frequently seen in web renderers Status in Canonical System Image: Fix Released Status in oxide-qt package in Ubuntu: Invalid Status in webbrowser-app package in Ubuntu: Fix Released Bug description: [See latest comments for recent repro notes] krillin 14.09 #2 + all updates applied After running the system for a while (few minutes) the system runs out of memory and start killing processes. It is very visible with the webbrowser or webapps because it renders the page and displays a white page when oxide-render is killed. Although it is not specific to oxide, and any app are killed (address-book, system-settings, ...) You can clearly notice that other apps are being killed because when you switch to the app it's all blurry and take a while to reload, also it loses its state (for example, you lose the message you were writing in the messaging-app) There is no specific steps to reproduce. I have several scopes enabled (photos, nearby, news) You don't have to have tons of apps open to reproduce this. Launching the webbrowser or a webapps and navigating on the phone between the scopes and the open app seems enough for the system to start killing processes. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: liboxideqtcore0 1.2.0-0ubuntu1 [origin: Ubuntu RTM] Uname: Linux 3.4.67 armv7l ApportVersion: 2.14.7-0ubuntu1 Architecture: armhf Date: Mon Sep 29 12:51:34 2014 InstallationDate: Installed on 2014-09-24 (5 days ago) InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf (20140924-030204) SourcePackage: oxide-qt UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1375215/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469008] Re: Ubuntu Phone: 1/15 Times the position & accuracy are lost
*** This bug is a duplicate of bug 1570878 *** https://bugs.launchpad.net/bugs/1570878 Hi, I think this is not a duplicate of bug #1570878. If you're tunning the GPS positions, it will fix both bugs, but that is not a duplicate (?). Best regards. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469008 Title: Ubuntu Phone: 1/15 Times the position & accuracy are lost Status in Canonical System Image: Confirmed Status in location-service package in Ubuntu: Confirmed Bug description: I found this problem developing GPS Navigator, but you can easily to see it with HERE Maps. - Launch HERE. - Big zoom in & follow your position. - BUG: Each 1/15 times, the position changes: This is because it changed the position & accuracy just for that time. This is happening in BQ E4.5, BQ E5 & Meizu MX4. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1469008/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1468020] Re: Two GPS compatible apps conflict and loose GPS
Hi, I'm not using AGPS. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1468020 Title: Two GPS compatible apps conflict and loose GPS Status in Canonical System Image: Incomplete Status in location-service package in Ubuntu: Incomplete Bug description: Meizu MX4 with Ubuntu 15.04 r2 1. run OSMscout (for example) 2. drive/cycle a distance to confirm that GPS tracking is working fine 3. run the camera app (for example) 4. take a few photos (they'll be tagged with GPS info) 5. switch to OSMscout 6. drive/cycle and OSM will now not update from GPS Haven't tested this with other apps as yet, but it seems that one app will take control of the GPS and not hand it back. (For want of a better explanation.) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1468020/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1468020] Re: Two GPS compatible apps conflict and loose GPS
@thomas-voss: Impossible for me report that info, as I'm driving or in bike when that happens :( I'm so sorry. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1468020 Title: Two GPS compatible apps conflict and loose GPS Status in Canonical System Image: Incomplete Status in location-service package in Ubuntu: Incomplete Bug description: Meizu MX4 with Ubuntu 15.04 r2 1. run OSMscout (for example) 2. drive/cycle a distance to confirm that GPS tracking is working fine 3. run the camera app (for example) 4. take a few photos (they'll be tagged with GPS info) 5. switch to OSMscout 6. drive/cycle and OSM will now not update from GPS Haven't tested this with other apps as yet, but it seems that one app will take control of the GPS and not hand it back. (For want of a better explanation.) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1468020/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1565236] Re: AltGr not working on external keyboards
Dead accute (áéíóú) is not working in my keyboard with Ubuntu Touch: This is my keyboard: http://es.aliexpress.com/store/product/Aluminum-Wireless-KEYBOARD-Bluetooth-3-0-for-Apple-IOS-Android-Windows-PC-Lithum-battery/833175_32633606243.html It's working rigth in Ubuntu Desktop & Windows 7 with Spanish layout or with Ubuntu Touch in English layout. It's not working in any app for me either. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1565236 Title: AltGr not working on external keyboards Status in Canonical System Image: Confirmed Status in Mir: New Status in mir package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Incomplete Bug description: Using my keyboard with Spanish layout: - PC: Everything works perfect. - Ubuntu Touch: I can't write accented characters (dead acute, áéíóú). Extra info: - Keyboard: http://www.logitech.com/en-hk/product/wireless-touch-keyboard-k400r2 - Ubuntu Desktop: 12.04 - Ubuntu Touch: bq Aquaris E4.5 15.04 (r305) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1565236/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1565236] Re: Spanish keyboard layout wrong
Same bluetooth keyboard: - In PC are working dead_acute - In phone not. Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1565236 Title: Spanish keyboard layout wrong Status in Canonical System Image: Confirmed Status in mir package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Incomplete Bug description: Keyboard: http://www.logitech.com/en-hk/product/wireless-touch- keyboard-k400r2 In Ubuntu 14.04 desktop (http://cdimage.ubuntu.com/releases/12.04/release/) the keyboard works perfect. In Phone: bq Aquaris E.4.5 Ubuntu Edition, Ubuntu release: 15.04 (r305): With the default keyboard layout I can write many characters pressing the keys they are printed. The specific symbols like ? or - are in different keys than those they are printed. This is expected. If I choose 'Spanish' from 'Settings > Language and text > External keyboard' I can write almost all characters and specific symbols except those which you have to press ALT-GR key. The accented characters are impossible to obtain, i.e., I only can write Sabado instead of Sábado. I have compared /usr/share/i18n/charmaps/ES.gz in desktop and phone and they don't have differences. I hope this to help. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1565236/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1565236] Re: Spanish keyboard layout wrong
Sorry, Spanish layout and not same keyboard as Sergi. Same keyboard in PC or UT. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to mir in Ubuntu. https://bugs.launchpad.net/bugs/1565236 Title: Spanish keyboard layout wrong Status in Canonical System Image: Confirmed Status in mir package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Incomplete Bug description: Keyboard: http://www.logitech.com/en-hk/product/wireless-touch- keyboard-k400r2 In Ubuntu 14.04 desktop (http://cdimage.ubuntu.com/releases/12.04/release/) the keyboard works perfect. In Phone: bq Aquaris E.4.5 Ubuntu Edition, Ubuntu release: 15.04 (r305): With the default keyboard layout I can write many characters pressing the keys they are printed. The specific symbols like ? or - are in different keys than those they are printed. This is expected. If I choose 'Spanish' from 'Settings > Language and text > External keyboard' I can write almost all characters and specific symbols except those which you have to press ALT-GR key. The accented characters are impossible to obtain, i.e., I only can write Sabado instead of Sábado. I have compared /usr/share/i18n/charmaps/ES.gz in desktop and phone and they don't have differences. I hope this to help. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1565236/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1468020] Re: Two GPS compatible apps conflict and loose GPS
This bug persist -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1468020 Title: Two GPS compatible apps conflict and loose GPS Status in Canonical System Image: Incomplete Status in location-service package in Ubuntu: Incomplete Bug description: Meizu MX4 with Ubuntu 15.04 r2 1. run OSMscout (for example) 2. drive/cycle a distance to confirm that GPS tracking is working fine 3. run the camera app (for example) 4. take a few photos (they'll be tagged with GPS info) 5. switch to OSMscout 6. drive/cycle and OSM will now not update from GPS Haven't tested this with other apps as yet, but it seems that one app will take control of the GPS and not hand it back. (For want of a better explanation.) To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1468020/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1562783] Re: [OTA9.1][bq E5][uNa 0.56] uNav freezes in location or shows blank screen
This happened to me for first time. Yesterday: - AGPS enabled. - Drive 2 times, 36 km each time. No problems. Night: - Fly mode. Today: - Exit Fly mode and 3G (not wifi enabled). - Start navigation with uNav. - GPS has so bad accuracy. - GPS has a good accuracy, uNav starts navigation. - After 2 minutes, uNav stops. uNav isn't freeze, it's not getting new GPS positions. - I cancel the current route and start again: Message from uNav: GPS is denied. - I close uNav and start Sensor Status in GPS tab. No positions during 15 minutes. - I start uNav again, GPS Denied message is displayed. But every settings are the same as in the start. - I start OpenStreetMap (Alan's app): Javascript Alert, Geolocation error: Permission denied. Everything is fine in the uNav log in the moment that it didn't receive new positions: http://pastebin.ubuntu.com/15549591/ Thanks in advance! ** Also affects: location-service (Ubuntu) Importance: Undecided Status: New ** Changed in: unav Status: New => Invalid ** Summary changed: - [OTA9.1][bq E5][uNa 0.56] uNav freezes in location or shows blank screen + GPS stops without reason -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1562783 Title: GPS stops without reason Status in uNav: Invalid Status in location-service package in Ubuntu: New Bug description: Hello Marcos, yesterday I was using uNav and: 1) Looked for an address, found a route. Started driving and after some indications, uNav just freezed in a location. No more response. 2) Closed it, opened again (^__^) . Searched for the same location and quickly continued the route indications (without searching the route again: good) but after sometime screen went blank (except for zoom buttons on screen). 3) Remembered that I didn't reboot the phone in a while. Reboot. Search for location,route, start driving. After some time blank screen again. 4) Started logging, searached location, route... driving: blank screen (a couple more) http://paste.ubuntu.com/15527213/ http://paste.ubuntu.com/15527312/ 5) Reboot phone, etc: blank screen http://paste.ubuntu.com/15529159/ 6) Put phone into flight mode (don't ask) went out again, search for location, route... driving: freeze in location http://paste.ubuntu.com/15529638/ 7) Closed uNav opened again: search for location: error: GPS Denied. Error reading GPS status. Please review device settings. (obviouly I did not turned off the GPS... :)) ¿Es grave doctor? To manage notifications about this bug go to: https://bugs.launchpad.net/unav/+bug/1562783/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1561627] After days of uptime, apps do not receive positionupdates.
The battery is perfect (98% and 45% of average). The phone is coming from a fly mode in the night. There is not a number of days. Something is affecting it (maybe network?) and when you open an application, it didn't get a position. The first time this happened was in March of the 2015 with HERE, it didn't get a position and it needed a phone reboot. I haven't a behavior for reproduce, I am sorry. I will try to use the tool you mentioned and if it is happening again to me, I'll not restart for analize it :) -- Sent using Dekko from my Ubuntu device -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1561627 Title: After days of uptime, apps do not receive position updates. Status in location-service package in Ubuntu: New Bug description: So complicate to reproduce, but this bug exists. If you don't reboot the phone in days, the first time you try a GPS app, it will not get any GPS position from the device. The unique way will be reboot the phone, then, the GPS will return positions again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1561627/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1561627] Ubuntu Phone: GPS is not returning positions toapps
I could tell you that this is happening in every device and image and from ever. I found this bug 8 months ago and it persists. It is happening in my: - bq in stable and rc-proposed. - mx4 in stable. - nexus 4 in rc-proposed. It is so random behavior, the app will not get ever a pos. Probably a GPS app like HERE or uNav will show the issue more easy, because it will never get a first position. It is like the GPS was locked. I never used that tool. I hope someone could report a dump of this. If I can, I'll do too :) -- Sent using Dekko from my Ubuntu device -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1561627 Title: After days of uptime, apps do not receive position updates. Status in location-service package in Ubuntu: New Bug description: So complicate to reproduce, but this bug exists. If you don't reboot the phone in days, the first time you try a GPS app, it will not get any GPS position from the device. The unique way will be reboot the phone, then, the GPS will return positions again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1561627/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1561627] [NEW] Ubuntu Phone: GPS is not returning positions to apps
Public bug reported: So complicate to reproduce, but this bug exists. If you don't reboot the phone in days, the first time you try a GPS app, it will not get any GPS position from the device. The unique way will be reboot the phone, then, the GPS will return positions again. Thanks in advance! ** Affects: location-service (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1561627 Title: Ubuntu Phone: GPS is not returning positions to apps Status in location-service package in Ubuntu: New Bug description: So complicate to reproduce, but this bug exists. If you don't reboot the phone in days, the first time you try a GPS app, it will not get any GPS position from the device. The unique way will be reboot the phone, then, the GPS will return positions again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1561627/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469008] Re: Ubuntu Phone: 1/15 Times the position & accuracy are lost
Doing tests this persists. The position is the same and so older. could ve possible discard positions by age from the device? This bug is so clear in a highway. Best regards -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469008 Title: Ubuntu Phone: 1/15 Times the position & accuracy are lost Status in location-service package in Ubuntu: Confirmed Bug description: I found this problem developing GPS Navigator, but you can easily to see it with HERE Maps. - Launch HERE. - Big zoom in & follow your position. - BUG: Each 1/15 times, the position changes: This is because it changed the position & accuracy just for that time. This is happening in BQ E4.5, BQ E5 & Meizu MX4. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1469008/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469007] Re: In first run, a GPS app is not asking about location
*** This bug is a duplicate of bug 1462664 *** https://bugs.launchpad.net/bugs/1462664 I think is happening the same with microphone permissions. 'Recorder' app didn't ask me with wifi on -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469007 Title: In first run, a GPS app is not asking about location Status in Canonical System Image: Confirmed Status in location-service package in Ubuntu: Incomplete Bug description: From OTA4, the first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1469007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1487565] Re: Ubuntu Phone BQ: Camera has a big zoom by default
I tested and it looks great. Thanks a lot! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1487565 Title: Ubuntu Phone BQ: Camera has a big zoom by default Status in camera-app: Fix Committed Status in camera-app package in Ubuntu: Fix Committed Bug description: Hi! I compared the BQ E4.5 & MX4 cameras with more phones, like BQ E4.5 Android, Nexus 4, Galaxy ACE. The Ubuntu camera has ~1.2 zoom more. You can see it better with near objects. Example BQ 4.5 Ubuntu & Android together: https://bugs.launchpad.net/camera-app/+bug/1442670/+attachment/4437195/+files/66314703528372165.jpg Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1487565/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1539862] [NEW] Dump in click build . in Ubuntu Xenial alpha2
Public bug reported: Hi! When I try to run click build ., I'm getting this dump: Traceback (most recent call last): File "/usr/bin/click-review", line 138, in main() File "/usr/bin/click-review", line 132, in main results.run_all_checks() File "/usr/bin/click-review", line 105, in run_all_checks self._run_module_checks(module) File "/usr/bin/click-review", line 90, in _run_module_checks review = modules.init_main_class(module, self.click_fn) File "/usr/lib/python3/dist-packages/clickreviews/modules.py", line 70, in init_main_class init_object = find_main_class(module_name) File "/usr/lib/python3/dist-packages/clickreviews/modules.py", line 48, in find_main_class module_name)) File "/usr/lib/python3.4/imp.py", line 171, in load_source module = methods.load() File "", line 1220, in load File "", line 1200, in _load_unlocked File "", line 1129, in _exec File "", line 1471, in exec_module File "", line 321, in _call_with_frames_removed File "/usr/lib/python3/dist-packages/clickreviews/cr_lint.py", line 18, in from apt import apt_pkg File "/usr/lib/python3/dist-packages/apt/__init__.py", line 23, in import apt_pkg ImportError: No module named 'apt_pkg' I think is because of python3 doesn't find the library. I fixed with this link: sudo ln -s /usr/lib/python3/dist-packages/apt_pkg.cpython-35m-i386-linux-gnu.so /usr/lib/python3/dist-packages/apt_pkg.so Thanks in advance! ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1539862 Title: Dump in click build . in Ubuntu Xenial alpha2 Status in ubuntu-ui-toolkit package in Ubuntu: New Bug description: Hi! When I try to run click build ., I'm getting this dump: Traceback (most recent call last): File "/usr/bin/click-review", line 138, in main() File "/usr/bin/click-review", line 132, in main results.run_all_checks() File "/usr/bin/click-review", line 105, in run_all_checks self._run_module_checks(module) File "/usr/bin/click-review", line 90, in _run_module_checks review = modules.init_main_class(module, self.click_fn) File "/usr/lib/python3/dist-packages/clickreviews/modules.py", line 70, in init_main_class init_object = find_main_class(module_name) File "/usr/lib/python3/dist-packages/clickreviews/modules.py", line 48, in find_main_class module_name)) File "/usr/lib/python3.4/imp.py", line 171, in load_source module = methods.load() File "", line 1220, in load File "", line 1200, in _load_unlocked File "", line 1129, in _exec File "", line 1471, in exec_module File "", line 321, in _call_with_frames_removed File "/usr/lib/python3/dist-packages/clickreviews/cr_lint.py", line 18, in from apt import apt_pkg File "/usr/lib/python3/dist-packages/apt/__init__.py", line 23, in import apt_pkg ImportError: No module named 'apt_pkg' I think is because of python3 doesn't find the library. I fixed with this link: sudo ln -s /usr/lib/python3/dist-packages/apt_pkg.cpython-35m-i386-linux-gnu.so /usr/lib/python3/dist-packages/apt_pkg.so Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1539862/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1487565] Re: Ubuntu Phone BQ: Camera has a big zoom by default
> Can you please confirm it's fixed for you with the latest camera app? Sure :) When will it be released? Best regards! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1487565 Title: Ubuntu Phone BQ: Camera has a big zoom by default Status in camera-app: Fix Committed Status in camera-app package in Ubuntu: Fix Committed Bug description: Hi! I compared the BQ E4.5 & MX4 cameras with more phones, like BQ E4.5 Android, Nexus 4, Galaxy ACE. The Ubuntu camera has ~1.2 zoom more. You can see it better with near objects. Example BQ 4.5 Ubuntu & Android together: https://bugs.launchpad.net/camera-app/+bug/1442670/+attachment/4437195/+files/66314703528372165.jpg Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1487565/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462664] Re: [Ubuntu Phone] With WIFI = ON the GPS stops
It is working in my MX4 & BQ E4.5. I think Nexus 4 is not in the same branch of code (?). -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: [Ubuntu Phone] With WIFI = ON the GPS stops Status in Canonical System Image: Fix Released Status in Oxide: New Status in ubuntu-system-settings: New Status in location-service package in Ubuntu: Fix Released Bug description: Hi! Steps: 1. Enable WIFI = ON on phone. 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. 3. Drive. 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. Extra info1: If you had GPS Navigation & Sensor running, both of them will not receive new GPS positions from the device. If you restart for example GPS Navigation, GPS Navigation will receive new positions, but Sensor Status not, until you restart it too. Extra info2: When the GPS stops the icon in the status disappears, but it you kill and relaunch the app, the icon will appear again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1442670] Ubuntu Phone BQ: Camera makes blur images
HDR off ;) -- Sent using Dekko from my Ubuntu device -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in Canonical System Image: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1452112] Re: Bluetooth turns on when airplane mode is turned off.
*** This bug is a duplicate of bug 1488170 *** https://bugs.launchpad.net/bugs/1488170 ** This bug has been marked a duplicate of bug 1488170 Bluetooth initiated after quitting airplane mode -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-bluetooth in Ubuntu. https://bugs.launchpad.net/bugs/1452112 Title: Bluetooth turns on when airplane mode is turned off. Status in indicator-bluetooth package in Ubuntu: Confirmed Bug description: Bluetooth is automatically activated when airplane mode is turned off. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-bluetooth/+bug/1452112/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1469007] Re: In first run, a GPS app is not asking about location
*** This bug is a duplicate of bug 1462664 *** https://bugs.launchpad.net/bugs/1462664 Hi @Pat, I think this bug is a duplicate of 1462664 :O A hug! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469007 Title: In first run, a GPS app is not asking about location Status in Canonical System Image: Confirmed Status in location-service package in Ubuntu: Incomplete Bug description: From OTA4, the first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1469007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462664] Re: [Ubuntu Phone] With WIFI = ON the GPS stops
Hi @Thomas, > trying to call into a stopped app, waiting for a response (for too long) FYI, this bug could have conflicts waiting a long response: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1468020 Best regards! :) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: [Ubuntu Phone] With WIFI = ON the GPS stops Status in Canonical System Image: In Progress Status in Oxide: New Status in ubuntu-system-settings: New Status in location-service package in Ubuntu: Confirmed Bug description: Hi! Steps: 1. Enable WIFI = ON on phone. 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. 3. Drive. 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. Extra info1: If you had GPS Navigation & Sensor running, both of them will not receive new GPS positions from the device. If you restart for example GPS Navigation, GPS Navigation will receive new positions, but Sensor Status not, until you restart it too. Extra info2: When the GPS stops the icon in the status disappears, but it you kill and relaunch the app, the icon will appear again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1509828] [NEW] Create new URL dispatcher for "Share to" a string
Public bug reported: Hi! I'd like to share a string (URL in this case) from my app to any app (Telegram by example). I think it would be useful create a new URL dispatcher in the system, something like: share:///http://my_link.com And send that to any app in an easy way. Thanks in advance! PS: I'm not sure if this is the project for this improvement, if not, please reasign. ** Affects: system-image (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to system-image in Ubuntu. https://bugs.launchpad.net/bugs/1509828 Title: Create new URL dispatcher for "Share to" a string Status in system-image package in Ubuntu: New Bug description: Hi! I'd like to share a string (URL in this case) from my app to any app (Telegram by example). I think it would be useful create a new URL dispatcher in the system, something like: share:///http://my_link.com And send that to any app in an easy way. Thanks in advance! PS: I'm not sure if this is the project for this improvement, if not, please reasign. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-image/+bug/1509828/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended
Hi @Pat: For me it's happening only in my MX4, my BQ E4.5 hasn't this problem. And this bug is very annoying for me. A hug. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to telephony-service in Ubuntu. https://bugs.launchpad.net/bugs/1477838 Title: [MX4] Crackling sound after playing audio and suspended Status in Canonical System Image: Confirmed Status in telephony-service package in Ubuntu: Confirmed Bug description: The Meizu MX4 is doing a weird "tic tic tic..." after receive a notification (from telegram, mail...) and it's suspended. -- When I press the screen lock button on the MX4 shortly after playing music or ending a phone call I hear a radio/fuzzy distorted noise coming from the phone. To make it stop I need to unlock and lock the screen again but this is not ideal. - When the screen is locked and the playing song is finished and waiting for a stopped signal, MX4 will do a weird lower sound. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1500539] Re: Ubuntu Phone: GPS is returning 3 positions at the same time
** Description changed: Hi! - I did this developing uNav, but with this app I confirm this issue: + I saw this developing uNav, but with this app I confirm this issue: https://uappexplorer.com/app/activitytracker.cwayne18 The GPS should return a new position in each time, but it's returning 3 positions at the same time: This is a GPX example in my route: [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.307767,-5.6908184] [43.307767,-5.6908184] [43.307767,-5.6908184] Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1500539 Title: Ubuntu Phone: GPS is returning 3 positions at the same time Status in location-service package in Ubuntu: Confirmed Bug description: Hi! I saw this developing uNav, but with this app I confirm this issue: https://uappexplorer.com/app/activitytracker.cwayne18 The GPS should return a new position in each time, but it's returning 3 positions at the same time: This is a GPX example in my route: [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.307767,-5.6908184] [43.307767,-5.6908184] [43.307767,-5.6908184] Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1500539/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1500039] Ubuntu Phone is not getting a mobile network celltriangulation position
Hi :) I think because of my tests that is not working at all. If you compare with another OS it just a few seconds to get a 'good' location, in UT I think it is only getting a slow cached GPS position. A hug :) -- Enviado con Dekko desde mi dispositivo Ubuntu -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1500039 Title: Ubuntu Phone is not getting a mobile network cell triangulation position Status in Canonical System Image: Confirmed Status in location-service package in Ubuntu: Confirmed Bug description: Hi! I think that the mobile network cell triangulation position is not working in Ubuntu Phone OS. The position should be really fast (~1 - 5") and I'm thinking that Ubuntu Phone is waiting for a real GPS position every time. A good test could be this: - Go to a room, way out of a sky to avoid a real GPS signal. - Set WiFi service OFF. - Set GPS service ON. - Set data connection ON. - Go to this website via webbrowser-app: http://leafletjs.com/examples/mobile-example.html The website will ask you to allow access to the current location. - Make sure to not have a GPS position cached. In a PC or *any* Android you'll see your position immediately. Bug: In Ubuntu Phone an error will appears. This error is because the geoposition (https://developer.mozilla.org/en-US/docs/Web/API/Geolocation/Using_geolocation) is not working with the cell triangulation network data. You can try a lot of apps like Google Maps, OSMTouch, HERE map, uNAV... and a fast position from data connection is not happening, unless you be with a WIFI connection. If you try Google Maps in Android, the position will be really fast just with data connection. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1500039/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1500539] [NEW] Ubuntu Phone: GPS is returning 3 positions at the same time
Public bug reported: Hi! I did this developing uNav, but with this app I confirm this issue: https://uappexplorer.com/app/activitytracker.cwayne18 The GPS should return a new position in each time, but it's returning 3 positions at the same time: This is a GPX example in my route: [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.307767,-5.6908184] [43.307767,-5.6908184] [43.307767,-5.6908184] Thanks in advance! ** Affects: location-service (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1500539 Title: Ubuntu Phone: GPS is returning 3 positions at the same time Status in location-service package in Ubuntu: New Bug description: Hi! I did this developing uNav, but with this app I confirm this issue: https://uappexplorer.com/app/activitytracker.cwayne18 The GPS should return a new position in each time, but it's returning 3 positions at the same time: This is a GPX example in my route: [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30816,-5.6914349] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.30844166674,-5.69115] [43.307767,-5.6908184] [43.307767,-5.6908184] [43.307767,-5.6908184] Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1500539/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1500039] Re: Ubuntu Phone is not getting a mobile network cell triangulation position
Hi! My device is MX4, Ubuntu version 15.04 (r4) OTA6, updated to 27/8/15. @Pat: If you used the GPS in you krillin, the position could be cached and you'll get a position. Best regards. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1500039 Title: Ubuntu Phone is not getting a mobile network cell triangulation position Status in Canonical System Image: Confirmed Status in location-service package in Ubuntu: Confirmed Bug description: Hi! I think that the mobile network cell triangulation position is not working in Ubuntu Phone OS. The position should be really fast (~1 - 5") and I'm thinking that Ubuntu Phone is waiting for a real GPS position every time. A good test could be this: - Go to a room, way out of a sky for avoid a real GPS signal. - Set WIFI service OFF. - Set GPS service ON. - Set data connection ON. - Go to this web into the phone: http://leafletjs.com/examples/mobile-example.html The web will ask you to allow access location. - It's really important not to have a GPS position cached too. In a PC or *any* Android you'll see your position immediately. Bug: In Ubuntu Phone an error will appears. This error is because the geoposition (https://developer.mozilla.org/en-US/docs/Web/API/Geolocation/Using_geolocation) is not working with the cell triangulation network data. You can try a lot of apps like Google Maps, OSMTouch, HERE map, uNAV... and a fast position from data connection is not happening, unless you be with a WIFI connection. If you try Google Maps in Android, the position will be really fast just with data connection. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1500039/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1500039] [NEW] Ubuntu Phone is not getting a mobile network cell triangulation position
Public bug reported: Hi! I think that the mobile network cell triangulation position is not working in Ubuntu Phone OS. The position should be really fast (~1 - 5") and I'm thinking that Ubuntu Phone is waiting for a real GPS position every time. A good test could be this: - Go to a room, way out of a sky for avoid a real GPS signal. - Set WIFI service OFF. - Set GPS service ON. - Set data connection ON. - Go to this web into the phone: http://leafletjs.com/examples/mobile-example.html The web will ask you to allow access location. - It's really important not to have a GPS position cached too. In a PC or *any* Android you'll see your position immediately. Bug: In Ubuntu Phone an error will appears. This error is because the geoposition (https://developer.mozilla.org/en-US/docs/Web/API/Geolocation/Using_geolocation) is not working with the cell triangulation network data. You can try a lot of apps like Google Maps, OSMTouch, HERE map, uNAV... and a fast position from data connection is not happening, unless you be with a WIFI connection. If you try Google Maps in Android, the position will be really fast just with data connection. Thanks in advance! ** Affects: location-service (Ubuntu) Importance: Undecided Status: New ** Attachment added: "photo342809579759970239.jpg" https://bugs.launchpad.net/bugs/1500039/+attachment/4475436/+files/photo342809579759970239.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1500039 Title: Ubuntu Phone is not getting a mobile network cell triangulation position Status in location-service package in Ubuntu: New Bug description: Hi! I think that the mobile network cell triangulation position is not working in Ubuntu Phone OS. The position should be really fast (~1 - 5") and I'm thinking that Ubuntu Phone is waiting for a real GPS position every time. A good test could be this: - Go to a room, way out of a sky for avoid a real GPS signal. - Set WIFI service OFF. - Set GPS service ON. - Set data connection ON. - Go to this web into the phone: http://leafletjs.com/examples/mobile-example.html The web will ask you to allow access location. - It's really important not to have a GPS position cached too. In a PC or *any* Android you'll see your position immediately. Bug: In Ubuntu Phone an error will appears. This error is because the geoposition (https://developer.mozilla.org/en-US/docs/Web/API/Geolocation/Using_geolocation) is not working with the cell triangulation network data. You can try a lot of apps like Google Maps, OSMTouch, HERE map, uNAV... and a fast position from data connection is not happening, unless you be with a WIFI connection. If you try Google Maps in Android, the position will be really fast just with data connection. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1500039/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1422534] No user name and password prompt for http basicauthentication protected pages
Hi, that is not working for Transmission daemon, it is listening at 9091. Best regards -- Sent using Dekko from my Ubuntu device -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1422534 Title: No user name and password prompt for http basic authentication protected pages Status in webbrowser-app package in Ubuntu: In Progress Status in webbrowser-app package in Ubuntu RTM: Confirmed Bug description: When accessing a http basic authentication protected page the browser does not prompt for a user name and password it simply displays the HTTP Error 401 Unauthorized message. The browser should prompt the user for credentials, set the Authorization header, etc... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1422534/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1426307] Re: location is inaccurate
Hi Lucio, > Yes, it's working perfectly in Portugal/Spain but not in Germany. A big location change could take a lot of time, the same as the first app startup. Could you leave it near to a window or in the car without movement? > > The accuracy in Portugal drifts between 2m and 20m. Yes, 2,5m is the best possible for a mobile GPS. > > In Germany there's no data at all visible in this app. It's weird :( The 26% of users are from Germany and no body reported this. > > I don't accept it to use a service like Nokia's HERE Do you have the Nokia HERE disabled? You have to enable it :( It's the unique way the GPS will work. Could be this the origin of the problem? > > I think it's neccessary to create the possibility to see some debug > output. Another way to improve this function might be the possibility to > enter the rough position in order to find satellites faster. Yes, I need to think in something about current GPS data :) > > Greetings, Lucio Best regards and thanks for your feedback! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1426307 Title: location is inaccurate Status in Canonical System Image: Fix Released Status in location-service package in Ubuntu: Fix Released Status in location-service source package in Vivid: Confirmed Status in location-service package in Ubuntu RTM: Fix Released Bug description: current build number: 122 device name: krillin channel: ubuntu-touch/devel-proposed alias: ubuntu-touch/vivid-proposed last update: 2015-02-25 15:06:29 version version: 122 version ubuntu: 20150225 version device: 20150210-95b6a9f version custom: 20150225 Location is inaccurate, it thinks that I'm several kilometres away from my actual location, in the middle of the sea. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: ubuntu-location-service-bin 2.1+15.04.20150126.1-0ubuntu1 Uname: Linux 3.4.67 armv7l ApportVersion: 2.16.1-0ubuntu2 Architecture: armhf Date: Fri Feb 27 11:10:42 2015 InstallationDate: Installed on 2015-02-25 (2 days ago) InstallationMedia: Ubuntu Vivid Vervet (development branch) - armhf (20150225-020204) SourcePackage: location-service UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.init.ubuntu.location.service.conf: 2015-02-10T21:38:59 To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1426307/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended
> Same bug is happening after i receive telegram or text message. Yes, that is happening me. This bug is after OTA7 yet. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to telephony-service in Ubuntu. https://bugs.launchpad.net/bugs/1477838 Title: [MX4] Crackling sound after playing audio and suspended Status in Canonical System Image: Confirmed Status in telephony-service package in Ubuntu: Confirmed Bug description: The Meizu MX4 is doing a weird "tic tic tic..." after receive a notification (from telegram, mail...) and it's suspended. -- When I press the screen lock button on the MX4 shortly after playing music or ending a phone call I hear a radio/fuzzy distorted noise coming from the phone. To make it stop I need to unlock and lock the screen again but this is not ideal. - When the screen is locked and the playing song is finished and waiting for a stopped signal, MX4 will do a weird lower sound. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1426307] location is inaccurate
Hi Lucio :) Did you try it in Portugal and it worked fine and it is not working in Germany? Could you try the app Sensor Status and give me the feedback? It will tell you about the accuracy. I think there is not more information available abaout satellites :( Best regards -- Sent using Dekko from my Ubuntu device -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1426307 Title: location is inaccurate Status in Canonical System Image: Fix Released Status in location-service package in Ubuntu: Fix Released Status in location-service source package in Vivid: Confirmed Status in location-service package in Ubuntu RTM: Fix Released Bug description: current build number: 122 device name: krillin channel: ubuntu-touch/devel-proposed alias: ubuntu-touch/vivid-proposed last update: 2015-02-25 15:06:29 version version: 122 version ubuntu: 20150225 version device: 20150210-95b6a9f version custom: 20150225 Location is inaccurate, it thinks that I'm several kilometres away from my actual location, in the middle of the sea. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: ubuntu-location-service-bin 2.1+15.04.20150126.1-0ubuntu1 Uname: Linux 3.4.67 armv7l ApportVersion: 2.16.1-0ubuntu2 Architecture: armhf Date: Fri Feb 27 11:10:42 2015 InstallationDate: Installed on 2015-02-25 (2 days ago) InstallationMedia: Ubuntu Vivid Vervet (development branch) - armhf (20150225-020204) SourcePackage: location-service UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.init.ubuntu.location.service.conf: 2015-02-10T21:38:59 To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1426307/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1442670] Re: Ubuntu Phone BQ: Camera makes blur images
From MX4 with good light ** Attachment added: image20150811_185503843.jpg https://bugs.launchpad.net/camera-app/+bug/1442670/+attachment/4443659/+files/image20150811_185503843.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in camera-app: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1442670] Re: Ubuntu Phone BQ: Camera makes blur images
FYI Meizu MX4 has the zoom issue too. Any another phone has a right zoom. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in camera-app: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
Thanks a lot for the answer :) On Thursday, August 6, 2015, Pat McGowan pat.mcgo...@canonical.com wrote: It should be working on Nexus 4, 7 and 10 Not sure when Nexus 5 build was updated as thats community driven -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in Canonical System Image: Fix Released Status in Canonical Click Reviewers tools: Fix Released Status in Ubuntu Developer Portal: New Status in apparmor-easyprof-ubuntu package in Ubuntu: Fix Released Status in qtsystems-opensource-src package in Ubuntu: Fix Released Status in qtubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity-system-compositor package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Status in qtsystems-opensource-src package in Ubuntu RTM: Fix Released Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. First step is to hook up QtSystemInfo screenSaverEnabled One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
Hi. One question please, was this released for the Nexus deviced too? I'm asking because a few Nexus 5/7 users are rating the app as Not Working. Thanks in advance. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in Canonical System Image: Fix Released Status in Canonical Click Reviewers tools: Fix Released Status in Ubuntu Developer Portal: New Status in apparmor-easyprof-ubuntu package in Ubuntu: Fix Released Status in qtsystems-opensource-src package in Ubuntu: Fix Released Status in qtubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity-system-compositor package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Status in qtsystems-opensource-src package in Ubuntu RTM: Fix Released Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. First step is to hook up QtSystemInfo screenSaverEnabled One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1442670] Re: Ubuntu Phone BQ: Camera makes blur images
These are an BQ E4.5 Ubuntu (left) and Android (right) together. The Android has less zoom :O The brightness and color I think is better in Android. Could this affect? Best regards. ** Attachment added: 66314703528372165.jpg https://bugs.launchpad.net/camera-app/+bug/1442670/+attachment/4437195/+files/66314703528372165.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in camera-app: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1477838] Re: [Ubuntu Phone MX4] Sound lower after receive a message
** Description changed: - The Meizu MX4 is doing a weird tic tic tic... after receive a message and be suspended. + The Meizu MX4 is doing a weird tic tic tic... after receive a notification (from telegram, mail...) and it's suspended. Thanks in advance! ** Summary changed: - [Ubuntu Phone MX4] Sound lower after receive a message + [Ubuntu Phone MX4] Sound lower after receive a notification sound -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to telephony-service in Ubuntu. https://bugs.launchpad.net/bugs/1477838 Title: [Ubuntu Phone MX4] Sound lower after receive a notification sound Status in telephony-service package in Ubuntu: New Bug description: The Meizu MX4 is doing a weird tic tic tic... after receive a notification (from telegram, mail...) and it's suspended. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/telephony-service/+bug/1477838/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1442670] Re: Ubuntu Phone BQ: Camera makes blur images
In my opinion the blur image in the Meizu is not so heavy, but sometimes the picture is not as it should be for that great camera. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in camera-app: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1476676] Re: [Ubuntu Phone] Cancel uninstall is not working
Hi Rodney! Do you have any new crash reports in /var/crash/? No, same files number after crash. Is this repeatable? Yes. What image, channel, and device is this on? Stable, OTA5 (Ubuntu 15.04 r24), bq E4.5 Best regards! Costales. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1476676 Title: [Ubuntu Phone] Cancel uninstall is not working Status in unity-scope-click package in Ubuntu: Confirmed Bug description: Hi! Steps: Go any installed app uninstall Cancel button uninstall = Bug: Cancel doesn't anything. Thanks in advance and best regards! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1476676/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1476676] Re: [Ubuntu Phone] Cancel uninstall is not working
Yes ;) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1476676 Title: [Ubuntu Phone] Cancel uninstall is not working Status in unity-scope-click package in Ubuntu: Confirmed Bug description: Hi! Steps: Go any installed app uninstall Cancel button uninstall = Bug: Cancel doesn't anything. Thanks in advance and best regards! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1476676/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
Then is working perfect :) yes, if I kill it the screensaver will apply. Thanks for the explanation! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in Canonical System Image: Fix Committed Status in Canonical Click Reviewers tools: Fix Released Status in Ubuntu Developer Portal: New Status in apparmor-easyprof-ubuntu package in Ubuntu: Fix Released Status in qtsystems-opensource-src package in Ubuntu: Fix Released Status in qtubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity-system-compositor package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Status in qtsystems-opensource-src package in Ubuntu RTM: Fix Released Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. First step is to hook up QtSystemInfo screenSaverEnabled One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1476676] [NEW] [Ubuntu Phone] Cancel uninstall is not working
Public bug reported: Hi! Steps: Go any installed app uninstall Cancel button uninstall = Bug: Cancel doesn't anything. Thanks in advance and best regards! ** Affects: unity-scope-click (Ubuntu) Importance: Undecided Status: Confirmed -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1476676 Title: [Ubuntu Phone] Cancel uninstall is not working Status in unity-scope-click package in Ubuntu: Confirmed Bug description: Hi! Steps: Go any installed app uninstall Cancel button uninstall = Bug: Cancel doesn't anything. Thanks in advance and best regards! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1476676/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1476676] Re: [Ubuntu Phone] Cancel uninstall is not working
I tried pressing the cancel button, and it took a couple of seconds (~8-10 secs) before it returned back to the app preview page. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1476676 Title: [Ubuntu Phone] Cancel uninstall is not working Status in unity-scope-click package in Ubuntu: Confirmed Bug description: Hi! Steps: Go any installed app uninstall Cancel button uninstall = Bug: Cancel doesn't anything. Thanks in advance and best regards! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1476676/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
Hi! I implemented in GPS Navigation after update to OTA5 and all it's working perfect. Thanks a lot for your support!! Costales -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in Canonical System Image: Fix Committed Status in Canonical Click Reviewers tools: Fix Released Status in Ubuntu Developer Portal: New Status in apparmor-easyprof-ubuntu package in Ubuntu: Fix Released Status in qtsystems-opensource-src package in Ubuntu: Fix Released Status in qtubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity-system-compositor package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Status in qtsystems-opensource-src package in Ubuntu RTM: Fix Released Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. First step is to hook up QtSystemInfo screenSaverEnabled One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
I found one wrong behaviour. If I disable the screensaver into the application, the screensaver will be disable on the entire system when the app goes to the background. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in Canonical System Image: Fix Committed Status in Canonical Click Reviewers tools: Fix Released Status in Ubuntu Developer Portal: New Status in apparmor-easyprof-ubuntu package in Ubuntu: Fix Released Status in qtsystems-opensource-src package in Ubuntu: Fix Released Status in qtubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity-system-compositor package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Status in qtsystems-opensource-src package in Ubuntu RTM: Fix Released Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. First step is to hook up QtSystemInfo screenSaverEnabled One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1437510] Re: Screen dim is not following the lock screen timeout (always dimming after 50 seconds)
For 2' works. If you set it to Never (I set it like that for driving) is not working, after 50 the brightness is lost. Best regards. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1437510 Title: Screen dim is not following the lock screen timeout (always dimming after 50 seconds) Status in Canonical System Image: Fix Released Status in Unity System Compositor: Confirmed Status in ubuntu-system-settings package in Ubuntu: Fix Released Status in unity-system-compositor package in Ubuntu: Confirmed Status in ubuntu-system-settings source package in Vivid: Fix Committed Status in unity-system-compositor package in Ubuntu RTM: Confirmed Bug description: current build number: 258 device name: krillin channel: ubuntu-touch/ubuntu-rtm/14.09-proposed last update: 2015-03-26 16:39:52 version version: 258 version ubuntu: 20150326 version device: 20150310-3201c0a version custom: 20150216-561-29-186 Go to system settings, security, lock when idle, and change to any value higher than 1 minute. Now wait and you will see that the screen will dim after 50 seconds, no matter what value you set. The screen should only dim 10 seconds before reaching the screen lock value. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1437510/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1437510] Re: Screen dim is not following the lock screen timeout (always dimming after 50 seconds)
Hi! This bug persist after update to OTA5. Best regards. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1437510 Title: Screen dim is not following the lock screen timeout (always dimming after 50 seconds) Status in Canonical System Image: Fix Released Status in Unity System Compositor: Confirmed Status in ubuntu-system-settings package in Ubuntu: Fix Released Status in unity-system-compositor package in Ubuntu: Confirmed Status in ubuntu-system-settings source package in Vivid: Fix Committed Status in unity-system-compositor package in Ubuntu RTM: Confirmed Bug description: current build number: 258 device name: krillin channel: ubuntu-touch/ubuntu-rtm/14.09-proposed last update: 2015-03-26 16:39:52 version version: 258 version ubuntu: 20150326 version device: 20150310-3201c0a version custom: 20150216-561-29-186 Go to system settings, security, lock when idle, and change to any value higher than 1 minute. Now wait and you will see that the screen will dim after 50 seconds, no matter what value you set. The screen should only dim 10 seconds before reaching the screen lock value. To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1437510/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1421710] Re: Rating entry form does not appear sometimes
FYI, I'm trying to review Cinema scope and I haven't the rate form for the last days. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1421710 Title: Rating entry form does not appear sometimes Status in unity-scope-click package in Ubuntu: Confirmed Bug description: Hi! I can't to rate a few applications in the Ubuntu Phone (BQ Ubuntu Edition). I flashed the mobile 2 times and it's in a random apps. Not a pattern. Please, see this video: https://copy.com/N6DGHrqYkk19XvsC Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1421710/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1434634] Re: Call notification should be in the center
** Changed in: unity8 (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1434634 Title: Call notification should be in the center Status in unity8 package in Ubuntu: Invalid Bug description: For 2 reasons :) Really top for the finger. Hangout with the official case closed: http://www.bq.com/es/accesorios-aquaris-e4-5-ubuntu.html Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1434634/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1421710] Re: Rating entry form does not appear sometimes
On Wed, Jun 24, 2015 at 11:49 PM, Rodney Dawes 1421...@bugs.launchpad.net wrote: @costales Are you still seeing this issue with the latest update for your device? Thanks. Yes, I have it now (OTA4). Best regards! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-scope-click in Ubuntu. https://bugs.launchpad.net/bugs/1421710 Title: Rating entry form does not appear sometimes Status in unity-scope-click package in Ubuntu: Incomplete Bug description: Hi! I can't to rate a few applications in the Ubuntu Phone (BQ Ubuntu Edition). I flashed the mobile 2 times and it's in a random apps. Not a pattern. Please, see this video: https://copy.com/N6DGHrqYkk19XvsC Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-scope-click/+bug/1421710/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
Thanks a lot! @Jamie: For testing it, when will your install .click work in the stable channel? With the next OTA5? -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity-system-compositor in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in the base for Ubuntu mobile products: Fix Committed Status in tools to review click packages: Fix Released Status in Ubuntu Developer Portal: New Status in apparmor-easyprof-ubuntu package in Ubuntu: In Progress Status in qtsystems-opensource-src package in Ubuntu: Fix Released Status in qtubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity-system-compositor package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Status in qtsystems-opensource-src package in Ubuntu RTM: Fix Released Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. First step is to hook up QtSystemInfo screenSaverEnabled One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469007] Re: In first run, a GPS app is not asking about location
Hi! I confirm this is happening in Meizu BQ and with WIFI = OFF (from a reset to factory). Best regards! ** Summary changed: - [Meizu MX4] In first run, a GPS app is not asking about location + In first run, a GPS app is not asking about location ** Description changed: - I'm not sure if this applies just Meizu or any device from OTA4. - - The first you run a GPS application, it is not asking permission for the location (and it hasn't permission). + From OTA4, the first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469007 Title: In first run, a GPS app is not asking about location Status in the base for Ubuntu mobile products: Confirmed Status in location-service package in Ubuntu: Incomplete Bug description: From OTA4, the first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1469007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462664] Re: [Ubuntu Phone] With WIFI = ON the GPS stops
I confirm that this is happen in BQ E4.5, BQ E5 Meizu MX4. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: [Ubuntu Phone] With WIFI = ON the GPS stops Status in the base for Ubuntu mobile products: Confirmed Status in Oxide Webview: New Status in Ubuntu Touch System Settings: New Status in location-service package in Ubuntu: Confirmed Bug description: Hi! Steps: 1. Enable WIFI = ON on phone. 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. 3. Drive. 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. Extra info1: If you had GPS Navigation Sensor running, both of them will not receive new GPS positions from the device. If you restart for example GPS Navigation, GPS Navigation will receive new positions, but Sensor Status not, until you restart it too. Extra info2: When the GPS stops the icon in the status disappears, but it you kill and relaunch the app, the icon will appear again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469008] [NEW] Ubuntu Phone: 1/15 Times the position accuracy are lost
Public bug reported: I found this problem developing GPS Navigator, but you can easily to see it with HERE Maps. - Launch HERE. - Big zoom in follow your position. - BUG: Each 1/15 times, the position changes: This is because it changed the position accuracy just for that time. This is happening in BQ E4.5, BQ E5 Meizu MX4. Thanks in advance! ** Affects: location-service (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469008 Title: Ubuntu Phone: 1/15 Times the position accuracy are lost Status in location-service package in Ubuntu: New Bug description: I found this problem developing GPS Navigator, but you can easily to see it with HERE Maps. - Launch HERE. - Big zoom in follow your position. - BUG: Each 1/15 times, the position changes: This is because it changed the position accuracy just for that time. This is happening in BQ E4.5, BQ E5 Meizu MX4. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1469008/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469007] [NEW] [Meizu MX4] In first run, a GPS app is not asking about location
Public bug reported: I'm not sure if this is from the OTA4. The first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! ** Affects: location-service (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469007 Title: [Meizu MX4] In first run, a GPS app is not asking about location Status in location-service package in Ubuntu: New Bug description: I'm not sure if this is from the OTA4. The first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1469007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1469007] Re: [Meizu MX4] In first run, a GPS app is not asking about location
** Description changed: - I'm not sure if this is from the OTA4. + I'm not sure if this applies just Meizu or any device from OTA4. The first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469007 Title: [Meizu MX4] In first run, a GPS app is not asking about location Status in location-service package in Ubuntu: New Bug description: I'm not sure if this applies just Meizu or any device from OTA4. The first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1469007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1469007] Re: [Meizu MX4] In first run, a GPS app is not asking about location
On Fri, Jun 26, 2015 at 10:21 AM, Jean-Baptiste Lallement jean-baptiste.lallem...@ubuntu.com wrote: @costales, could you please indicate on which image/device you started seeing this issue. Thanks. Hi! It's MX4, Ubuntu 15.04 r2. If I turn Wifi off the prompt is always displayed. Could it be a side effect of bug 1462664? Uhm... yes, it could be from my tests :O Well done!! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1469007 Title: [Meizu MX4] In first run, a GPS app is not asking about location Status in the base for Ubuntu mobile products: Confirmed Status in location-service package in Ubuntu: Incomplete Bug description: I'm not sure if this applies just Meizu or any device from OTA4. The first you run a GPS application, it is not asking permission for the location (and it hasn't permission). If you kill the app, the next times will not ask either. You have to reboot the phone, then in the first new run, yes, it will ask for location. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1469007/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462665] Re: Screen Saver QML is not working
*** This bug is a duplicate of bug 1462489 ***
https://bugs.launchpad.net/bugs/1462489
** This bug has been marked a duplicate of bug 1462489
Allow apps to keep the screen on
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1462665
Title:
Screen Saver QML is not working
Status in qtubuntu package in Ubuntu:
New
Bug description:
Hi!
From the API:
https://developer.ubuntu.com/api/apps/qml/sdk-14.10/QtMultimedia.Video/
This is not working for me:
import QtSystemInfo 5.0
ScreenSaver { screenSaverEnabled: false }
The app is setting the screen off after 1'.
Thanks in advance!
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1462665/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1442670] Re: Ubuntu Phone BQ: Camera makes blur images
Same problem in BQ E5 ** Attachment added: image20150620_182735120.jpg https://bugs.launchpad.net/camera-app/+bug/1442670/+attachment/4418104/+files/image20150620_182735120.jpg -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in Camera App: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1465964] [NEW] GPS not works with Location detection OFF
Public bug reported: Hi! I was driving 33km with GPS = ON Location detection = OFF. I didn't get positions in Sensor Status app in those 40'. Thanks in advance! ** Affects: location-service (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1465964 Title: GPS not works with Location detection OFF Status in location-service package in Ubuntu: New Bug description: Hi! I was driving 33km with GPS = ON Location detection = OFF. I didn't get positions in Sensor Status app in those 40'. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/location-service/+bug/1465964/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462664] Re: [Ubuntu Phone] With WIFI = ON the GPS stops
** No longer affects: unav -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: [Ubuntu Phone] With WIFI = ON the GPS stops Status in Oxide Webview: New Status in Ubuntu Touch System Settings: New Status in location-service package in Ubuntu: Confirmed Bug description: Hi! Steps: 1. Enable WIFI = ON on phone. 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. 3. Drive. 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. Extra info1: If you had GPS Navigation Sensor running, both of them will not receive new GPS positions from the device. If you restart for example GPS Navigation, GPS Navigation will receive new positions, but Sensor Status not, until you restart it too. Extra info2: When the GPS stops the icon in the status disappears, but it you kill and relaunch the app, the icon will appear again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/oxide/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462664] Re: [Ubuntu Phone] With WIFI = ON the GPS stops
I updated the title description bug after 3 weeks of tests. I'm attaching a few things: 6.54PM_before_fail_with_GPS_icon.jpg: Screenshot before fail the GPS. You can see the GPS icon into the status bar. 6.56PM_after_fail_no_GPS_icon.jpg: Screenshot just alter fail the GPS. The GPS icon dissapeared. dmesg-status_sendor_stop1.txt: dmesg just after fail with Sensor Status. dmesg-status_sendor_stop2.txt: dmesg just after fail with Sensor Status the 2º time. dmesg-here_maps_stop1.txt: dmesg just after fail with HERE MAP Thanks in advance! ** Attachment added: Logs https://bugs.launchpad.net/unav/+bug/1462664/+attachment/4415776/+files/logs.tar.gz ** Also affects: ubuntu-system-settings Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: [Ubuntu Phone] With WIFI = ON the GPS stops Status in Oxide Webview: New Status in Ubuntu Touch System Settings: New Status in uNAV: Confirmed Status in location-service package in Ubuntu: New Bug description: Hi! Steps: 1. Enable WIFI = ON on phone. 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. 3. Drive. 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. Extra info1: If you had GPS Navigation Sensor running, both of them will not receive new GPS positions from the device. If you restart for example GPS Navigation, GPS Navigation will receive new positions, but Sensor Status not, until you restart it too. Extra info2: When the GPS stops the icon in the status disappears, but it you kill and relaunch the app, the icon will appear again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/oxide/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462664] Re: [Ubuntu Phone] WIFI = ON is killing GPS signal
** Summary changed: - Geolocation app is freezing in a few mobiles + [Ubuntu Phone] WIFI = ON is killing GPS signal ** Summary changed: - [Ubuntu Phone] WIFI = ON is killing GPS signal + [Ubuntu Phone] With WIFI = ON the GPS stops ** Description changed: Hi! - With the app GPS Navigation a few users have problem with a freeze - issue, because of 100% CPU usage or heavy swap usage (I don't know, - because I can't reproduce it. + Steps: + 1. Enable WIFI = ON on phone. + 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. + 3. Drive. + 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. - For some users, it is working perfect, for other is freezing after a few minutes. You can see here the user reviews: - https://uappexplorer.com/app/navigator.costales + Extra info1: If you had GPS Navigation Sensor running, both of them + will not receive new GPS positions from the device. If you restart for + example GPS Navigation, GPS Navigation will receive new positions, but + Sensor Status not, until you restart it too. - The code is here: - http://bazaar.launchpad.net/~costales/unav/trunk/view/head:/www/js/geolocation.js - It's just a simple HTML5 geolocation code. Even I added a reject control for more that 1 request by 800 microseconds. - - I think it could be the GPS doing a lot of request by second or the web - container is freezing waiting for GPS. + Extra info2: When the GPS stops the icon in the status disappears, but + it you kill and relaunch the app, the icon will appear again. Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: [Ubuntu Phone] With WIFI = ON the GPS stops Status in Oxide Webview: New Status in uNAV: Confirmed Status in location-service package in Ubuntu: New Bug description: Hi! Steps: 1. Enable WIFI = ON on phone. 2. Run one of these apps: GPS Navigation, HERE maps, Sensor Status. 3. Drive. 4. When you'll be into a WIFI area as a town or city, I'm thinking the WIFI will try to search WIFIs and then the GPS will stop, the GPS apps will not receive more new positions from the GPS. Extra info1: If you had GPS Navigation Sensor running, both of them will not receive new GPS positions from the device. If you restart for example GPS Navigation, GPS Navigation will receive new positions, but Sensor Status not, until you restart it too. Extra info2: When the GPS stops the icon in the status disappears, but it you kill and relaunch the app, the icon will appear again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/oxide/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1426307] Re: location is inaccurate
Hi Lucio :) Are you talking about the time that the GPS takes for get accuracy? Please, could you confirm me if the Sensor Status app (from the Store) works in the same way too? Best regards and thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to location-service in Ubuntu. https://bugs.launchpad.net/bugs/1426307 Title: location is inaccurate Status in the base for Ubuntu mobile products: Fix Released Status in location-service package in Ubuntu: Fix Released Status in location-service source package in Vivid: New Status in location-service package in Ubuntu RTM: Fix Released Bug description: current build number: 122 device name: krillin channel: ubuntu-touch/devel-proposed alias: ubuntu-touch/vivid-proposed last update: 2015-02-25 15:06:29 version version: 122 version ubuntu: 20150225 version device: 20150210-95b6a9f version custom: 20150225 Location is inaccurate, it thinks that I'm several kilometres away from my actual location, in the middle of the sea. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: ubuntu-location-service-bin 2.1+15.04.20150126.1-0ubuntu1 Uname: Linux 3.4.67 armv7l ApportVersion: 2.16.1-0ubuntu2 Architecture: armhf Date: Fri Feb 27 11:10:42 2015 InstallationDate: Installed on 2015-02-25 (2 days ago) InstallationMedia: Ubuntu Vivid Vervet (development branch) - armhf (20150225-020204) SourcePackage: location-service UpgradeStatus: No upgrade log present (probably fresh install) mtime.conffile..etc.init.ubuntu.location.service.conf: 2015-02-10T21:38:59 To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1426307/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
The project is this: lp:~unav
I added 'video' 'audio' into the policy_groups.
I added then this both tags
http://doc.qt.io/qt-5/qml-qtmultimedia-audio.html into the QML:
Audio {
}
Video
}
But the screen is setting OFF after 1' :(
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu
in Ubuntu.
https://bugs.launchpad.net/bugs/1462489
Title:
Allow apps to keep the screen on
Status in apparmor-easyprof-ubuntu package in Ubuntu:
Confirmed
Status in ubuntu-system-settings package in Ubuntu:
Confirmed
Status in ubuntu-ui-toolkit package in Ubuntu:
Confirmed
Status in unity8 package in Ubuntu:
Confirmed
Bug description:
Support an interface in QML and HTML to allow an app to keep the
screen on while the app is active. This has come up in several
scenarios, such as an ebook reader, a clock in night mode.
One solution to inhibit the screen blanking:
Add a new dbus rule to the default template
Provide a mediator (unity8) to control this, so it can restore the screen
blanking when the app is not active or has been closed
Prompt the user for confirmation the first time the app accesses it
use the trust store to avoid prompts each time
add to the System settings Other app access panel an entry for Screen or
Display so the setting could be revoked
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions
--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462664] Re: Geolocation app is freezing in a few mobiles
On Tue, Jun 9, 2015 at 5:33 PM, Sergi Quiles Pérez serg...@gmail.com wrote: It is necessary to have 3G all the time or the app has the ability to work with just the GPS signal (without refresh the map)? Thanks for your feedback Sergi! :) The app needs 3G for set the route maps. Do you have the freeze issue always in the same point? It could be great for debug things. FYI You can set a route with 3G and then, disable the 3G. You'll have a white map (no map) and it can't be recalculate the route. If you'll be in the right way all the time you'll see the blue route line using just GPS. A hug! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: Geolocation app is freezing in a few mobiles Status in uNAV: New Status in webbrowser-app package in Ubuntu: Confirmed Status in webbrowser-app package in Ubuntu RTM: New Bug description: Hi! With the app GPS Navigation a few users have problem with a freeze issue, because of 100% CPU usage or heavy swap usage (I don't know, because I can't reproduce it. For some users, it is working perfect, for other is freezing after a few minutes. You can see here the user reviews: https://uappexplorer.com/app/navigator.costales The code is here: http://bazaar.launchpad.net/~costales/unav/trunk/view/head:/www/js/geolocation.js It's just a simple HTML5 geolocation code. Even I added a reject control for more that 1 request by 800 microseconds. I think it could be the GPS doing a lot of request by second or the web container is freezing waiting for GPS. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/unav/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
Thanks Pat ;) Then, I can't use it, because I have indicator voices and I'm not playing then all the time :( Thanks anyway! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in apparmor-easyprof-ubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462664] Re: Geolocation app is freezing in a few mobiles
Hi! Today I get a freeze on the app startup. It was just when I changed from wifi to 3G and I launched the app. The app had not a real data connectivity in that moment, a connectivity error should be appear, but not, just an app freeze. Maybe that can help. We should need an user will a persist problem all the time :( Thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu. https://bugs.launchpad.net/bugs/1462664 Title: Geolocation app is freezing in a few mobiles Status in uNAV: New Status in webbrowser-app package in Ubuntu: New Status in webbrowser-app package in Ubuntu RTM: New Bug description: Hi! With the app GPS Navigation a few users have problem with a freeze issue, because of 100% CPU usage or heavy swap usage (I don't know, because I can't reproduce it. For some users, it is working perfect, for other is freezing after a few minutes. You can see here the user reviews: https://uappexplorer.com/app/navigator.costales The code is here: http://bazaar.launchpad.net/~costales/unav/trunk/view/head:/www/js/geolocation.js It's just a simple HTML5 geolocation code. Even I added a reject control for more that 1 request by 800 microseconds. I think it could be the GPS doing a lot of request by second or the web container is freezing waiting for GPS. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/unav/+bug/1462664/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
I made GPS Navigation app. I need to config the idle screen for use this app each time :( I'd need to set the screen = ON always. I'm receiving bad user reviews too in the Store because of this (for example, review of Jun 6 or 4, 2015) https://uappexplorer.com/app/navigator.costales The only minor flaw so far is that it lets the screen dim even if screen lock is off - it would be nice to be able to disable that. screem auto dims even if I change Bq phone settings. has no option for always on screen wich goes dark after 1 min the screen turns almost down even if I set the never sleep option up For a video apps it would be useful too. Best regards! On Mon, Jun 8, 2015 at 2:43 PM, Sebastien Bacher seb...@ubuntu.com wrote: do we really need a permission for that? is there any issue to let the focussed application control the screen? -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in apparmor-easyprof-ubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
THanks Jamie, It's OK the user question :) This is a QML container for a web, then should I to add the media-hub for this kind of app? Is it just that? Thanks in advance! On Monday, June 8, 2015, Jamie Strandboge ja...@ubuntu.com wrote: On 06/08/2015 12:17 PM, costales wrote: I made GPS Navigation app. I need to config the idle screen for use this app each time :( I'd need to set the screen = ON always. FYI, the suggested implementation in the bug is to ask the user the first time the app tries to inhibit the screen turning off if it is ok to do this-- after that the answer will be remembered (and thereafter adjustable in system settings). I don't know if this will be the actual implementation, but the idea is to solve your issue when it is implemented. ... For a video apps it would be useful too. Video apps should be using media-hub which already has the ability to inhibit the screen turning off. Webapps needing this are waiting for work that is in progress to make media-hub work with oxide, but that is coming. -- Jamie Strandboge | http://www.ubuntu.com -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in apparmor-easyprof-ubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1462489] Re: Allow apps to keep the screen on
I was looking into the apparmor and I didn't find any 'media'... I found a media-hub into the video module. Then I added that to the project, but it didn't work. I'm a bit lost, I didn't find documentation about media-hub. Please, could you put me in the right way? :) Thanks in advance! Costales -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to apparmor-easyprof-ubuntu in Ubuntu. https://bugs.launchpad.net/bugs/1462489 Title: Allow apps to keep the screen on Status in apparmor-easyprof-ubuntu package in Ubuntu: Confirmed Status in ubuntu-system-settings package in Ubuntu: Confirmed Status in ubuntu-ui-toolkit package in Ubuntu: Confirmed Status in unity8 package in Ubuntu: Confirmed Bug description: Support an interface in QML and HTML to allow an app to keep the screen on while the app is active. This has come up in several scenarios, such as an ebook reader, a clock in night mode. One solution to inhibit the screen blanking: Add a new dbus rule to the default template Provide a mediator (unity8) to control this, so it can restore the screen blanking when the app is not active or has been closed Prompt the user for confirmation the first time the app accesses it use the trust store to avoid prompts each time add to the System settings Other app access panel an entry for Screen or Display so the setting could be revoked To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apparmor-easyprof-ubuntu/+bug/1462489/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1453163] Re: [Ubuntu Phone BQ] Wrong brightness after a few minutes with Never sleep
** Also affects: unav Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-network in Ubuntu. https://bugs.launchpad.net/bugs/1453163 Title: [Ubuntu Phone BQ] Wrong brightness after a few minutes with Never sleep Status in Ubuntu Touch System Settings: New Status in uNAV: New Status in indicator-network package in Ubuntu: Invalid Bug description: Hi! Steps: 1. Set in the Battery preferences: Sleep when idle = Never 2. Set in the Brightness preferences: Adjust automatically = Disabled 3. Set in the Brightness preferences: Display brightness bar = Max. brightness 4. Leave the mobile in a web BUG: After ~2' the brightness is changing to a lower brightness. This is annoying in special with the GPS application Here, when you're driving and you want the max brightness in the mobile all the time. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-system-settings/+bug/1453163/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1453163] Re: [Ubuntu Phone BQ] Wrong brightness after a few minutes with Never sleep
Hi! FYI this persist after the last core upgrade 5 days ago. Best regards! ** Description changed: Hi! Steps: 1. Set in the Battery preferences: Sleep when idle = Never 2. Set in the Brightness preferences: Adjust automatically = Disabled 3. Set in the Brightness preferences: Display brightness bar = Max. brightness 4. Leave the mobile in a web BUG: After ~2' the brightness is changing to a lower brightness. - This is a problem for example for a GPS application as Here, when you're - driving and you want the max brightness in the mobile. + This is annoying in special with the GPS application Here, when you're + driving and you want the max brightness in the mobile all the time. Thanks in advance! ** Also affects: ubuntu-system-settings Importance: Undecided Status: New ** Changed in: indicator-network (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-network in Ubuntu. https://bugs.launchpad.net/bugs/1453163 Title: [Ubuntu Phone BQ] Wrong brightness after a few minutes with Never sleep Status in Ubuntu Touch System Settings: New Status in indicator-network package in Ubuntu: Invalid Bug description: Hi! Steps: 1. Set in the Battery preferences: Sleep when idle = Never 2. Set in the Brightness preferences: Adjust automatically = Disabled 3. Set in the Brightness preferences: Display brightness bar = Max. brightness 4. Leave the mobile in a web BUG: After ~2' the brightness is changing to a lower brightness. This is annoying in special with the GPS application Here, when you're driving and you want the max brightness in the mobile all the time. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-system-settings/+bug/1453163/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1451024] Re: Ubuntu phone: Changed (viewport?) resolution in the last core update
** Summary changed: - Ubuntu phone: Changed (dpi?) resolution in the last core update + Ubuntu phone: Changed (viewport?) resolution in the last core update -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1451024 Title: Ubuntu phone: Changed (viewport?) resolution in the last core update Status in oxide-qt package in Ubuntu: Incomplete Status in qtmir package in Ubuntu: New Status in unity8 package in Ubuntu: New Bug description: Hi! After the last core update, 2 weeks ago, a few webapps have problems with the resolution. By example 'messenger' and 'the circle game'. Thanks in advance To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/oxide-qt/+bug/1451024/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1453159] [NEW] [Ubuntu Phone BQ] GPS disabled after flight mode/restart
Public bug reported: Hi! Steps: 1. Enable GPS from the status bar. 2. Change to Flight mode enabled 3. Change to Flight mode disabled Bug: GPS is disabled It's not happening all the times. I don't know the pattern. The GPS is losing its status a few times with a mobile restart too. Thanks in advance! ** Affects: indicator-network (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-network in Ubuntu. https://bugs.launchpad.net/bugs/1453159 Title: [Ubuntu Phone BQ] GPS disabled after flight mode/restart Status in indicator-network package in Ubuntu: New Bug description: Hi! Steps: 1. Enable GPS from the status bar. 2. Change to Flight mode enabled 3. Change to Flight mode disabled Bug: GPS is disabled It's not happening all the times. I don't know the pattern. The GPS is losing its status a few times with a mobile restart too. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-network/+bug/1453159/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1453163] [NEW] [Ubuntu Phone BQ] Wrong brightness after a few minutes with Never sleep
Public bug reported: Hi! Steps: 1. Set in the Battery preferences: Sleep when idle = Never 2. Set in the Brightness preferences: Adjust automatically = Disabled 3. Set in the Brightness preferences: Display brightness bar = Max. brightness 4. Leave the mobile in a web BUG: After ~2' the brightness is changing to a lower brightness. This is a problem for example for a GPS application as Here, when you're driving and you want the max brightness in the mobile. Thanks in advance! ** Affects: indicator-network (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-network in Ubuntu. https://bugs.launchpad.net/bugs/1453163 Title: [Ubuntu Phone BQ] Wrong brightness after a few minutes with Never sleep Status in indicator-network package in Ubuntu: New Bug description: Hi! Steps: 1. Set in the Battery preferences: Sleep when idle = Never 2. Set in the Brightness preferences: Adjust automatically = Disabled 3. Set in the Brightness preferences: Display brightness bar = Max. brightness 4. Leave the mobile in a web BUG: After ~2' the brightness is changing to a lower brightness. This is a problem for example for a GPS application as Here, when you're driving and you want the max brightness in the mobile. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-network/+bug/1453163/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1451024] Re: Ubuntu phone: Changed (dpi?) resolution in the last core update
Hi Olivier! The zoom to the pages was the double and 'better' mobile layout before the last Ubuntu core update. Now is r21 in BQ Ubuntu Edition. By example, you can see the change in Messenger from the official application screenshot: https://uappexplorer.com/app/fbmessenger.johangm90 Now: https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1451024/+attachment/4392084/+files/messenger.png After the update: https://myapps.developer.ubuntu.com/site_media/appmedia/2015/04/Captura_de_pantalla_de_2015-04-08_22_50_30.png As you can see, something is wrong, I'm thinking the dpi (?). Where is the problem? If you login into the Messenger, all is really small. Best regards and thanks in advance! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to unity8 in Ubuntu. https://bugs.launchpad.net/bugs/1451024 Title: Ubuntu phone: Changed (dpi?) resolution in the last core update Status in oxide-qt package in Ubuntu: Incomplete Status in qtmir package in Ubuntu: New Status in unity8 package in Ubuntu: New Bug description: Hi! After the last core update, 2 weeks ago, a few webapps have problems with the resolution. By example 'messenger' and 'the circle game'. Thanks in advance To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/oxide-qt/+bug/1451024/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1421704] Re: Ubuntu Phone: Needs better redefine selecting text
Hi Christian! I haven't a video camera and my previous Galaxy ACE is doing a bad videos :( I can't do more, sorry. But I think the test is easy: Use Android, open a webbrowser and select text in the address bar. Return to Ubuntu Phone and try it again. The difference is better in Android (of course, in my opinion) :) Best regards! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in Ubuntu. https://bugs.launchpad.net/bugs/1421704 Title: Ubuntu Phone: Needs better redefine selecting text Status in ubuntu-ui-toolkit package in Ubuntu: Incomplete Bug description: By example, enter in the browser and select the middle of an URL, expand the selection to the end of the URL, try to change it again from the end to the middle: It's complicate to redefine. Please, see this video: https://copy.com/FeSJzQJx0y9JUlzZ Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1421704/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1442670] Re: Ubuntu Phone BQ: Camera makes blur images
Hi Florian! I just have a BQ Ubuntu Edition, I can't try it with an Android BQ 4.5 :( I'm so sorry. Please, could you (Canonical) ask to BQ about this? Maybe other user could give you the requested example. BQ is glad about its camera: http://www.bq.com/gb/products/aquaris-e4-5.html#camera-section We’ve improved the quality of our cameras so that you take better pictures But sincerely, my cheap Galaxy ACE camera never took a blur picture like that. I'm thinking is something about the focus, because I took a good pictures some times. As other user asked, this should be a priority issue, because the quality pictures are one of the most important factors to buy a phone or other. Best regards! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to camera-app in Ubuntu. https://bugs.launchpad.net/bugs/1442670 Title: Ubuntu Phone BQ: Camera makes blur images Status in Camera App: Confirmed Status in camera-app package in Ubuntu: Confirmed Bug description: Hi! A lot of times the camera is getting a really bad images (blur effect) in all resolutions. And yes, I click previously for a focus. I'm sending you an example: That picture looked perfect in the mobile, but in the PC is really bad :( Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/camera-app/+bug/1442670/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440061] Re: Grey out entry in Ubuntu Unity 14.04+
Hi! I fixed it with this change in the code: http://bazaar.launchpad.net/~costales/anoise/trunk/revision/25 The application needed the CanRaise for the not grey entry. Cheers! :) ** Changed in: indicator-sound (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1440061 Title: Grey out entry in Ubuntu Unity 14.04+ Status in indicator-sound package in Ubuntu: Invalid Bug description: Hi! I developed a player for play noise sounds from the sound indicator. I'm using this library: http://theravingrick.blogspot.com.es/2011/02/easily-support-sound-menu-in-python.html in my code: https://code.launchpad.net/anoise When the player is running, the entry in the sound indicator is grey out, as you can see in the attachment. But all works fine anyway. It's just the grey color. I reviewed all the code and library and I'm stuck in this issue. FYI, these tests: 1. With the precise indicator-sound is not grey. 2. In Ubuntu MATE is not grey. 3. The library is returning a critical error: http://paste.ubuntu.com/10730511/ But others players aren't grey. Thanks in advance!! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1440061/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1440061] Re: Grey out entry in Ubuntu Unity 14.04+
It's not really in the background, the window is hidden. Please, uncomment this line: costales@netbook:~$ grep debug /usr/share/anoise/anoise.py #win.show_all() # For debug costales@netbook:~$ Logout login again. Click on the entry Ambient Noise of the sound indicator (it's normal before the click) and you'll see the window, but the entry will change to grey. Thanks in advance!! I really apreciate the help. -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1440061 Title: Grey out entry in Ubuntu Unity 14.04+ Status in indicator-sound package in Ubuntu: New Bug description: Hi! I developed a player for play noise sounds from the sound indicator. I'm using this library: http://theravingrick.blogspot.com.es/2011/02/easily-support-sound-menu-in-python.html in my code: https://code.launchpad.net/anoise When the player is running, the entry in the sound indicator is grey out, as you can see in the attachment. But all works fine anyway. It's just the grey color. I reviewed all the code and library and I'm stuck in this issue. FYI, these tests: 1. With the precise indicator-sound is not grey. 2. In Ubuntu MATE is not grey. 3. The library is returning a critical error: http://paste.ubuntu.com/10730511/ But others players aren't grey. Thanks in advance!! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1440061/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1440061] [NEW] Grey out entry in Ubuntu Unity 14.04+
Public bug reported: Hi! I developed a player for play noise sounds from the sound indicator. I'm using this library: http://theravingrick.blogspot.com.es/2011/02/easily-support-sound-menu-in-python.html in my code: https://code.launchpad.net/anoise When the player is running, the entry in the sound indicator is grey out, as you can see in the attachment. But all works fine anyway. It's just the grey color. I reviewed all the code and library and I'm stuck in this issue. FYI, these tests: 1. With the precise indicator-sound is not grey. 2. In Ubuntu MATE is not grey. 3. The library is returning a critical error: http://paste.ubuntu.com/10730511/ But others players aren't grey. Thanks in advance!! ** Affects: indicator-sound (Ubuntu) Importance: Undecided Status: New ** Attachment added: Grey out entry in sound indicator https://bugs.launchpad.net/bugs/1440061/+attachment/4365094/+files/sound.png -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-sound in Ubuntu. https://bugs.launchpad.net/bugs/1440061 Title: Grey out entry in Ubuntu Unity 14.04+ Status in indicator-sound package in Ubuntu: New Bug description: Hi! I developed a player for play noise sounds from the sound indicator. I'm using this library: http://theravingrick.blogspot.com.es/2011/02/easily-support-sound-menu-in-python.html in my code: https://code.launchpad.net/anoise When the player is running, the entry in the sound indicator is grey out, as you can see in the attachment. But all works fine anyway. It's just the grey color. I reviewed all the code and library and I'm stuck in this issue. FYI, these tests: 1. With the precise indicator-sound is not grey. 2. In Ubuntu MATE is not grey. 3. The library is returning a critical error: http://paste.ubuntu.com/10730511/ But others players aren't grey. Thanks in advance!! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1440061/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
Re: [Touch-packages] [Bug 1424791] Re: Ubuntu Phone: cellular data did not recover after losing coverage
@Tony, no, just 1 SIM card ;) -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1424791 Title: Ubuntu Phone: cellular data did not recover after losing coverage Status in network-manager package in Ubuntu: Incomplete Bug description: Hi! Today I travelled in train and I lost my mobile signal. BUG: After have signal, the cellular data (3G) is not recovering. I have to enter in plane mode and exit from that mode for having 3G again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1424791/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1424791] Re: Ubuntu Phone: cellular data did not recover after losing coverage
@Tony, yes it's complicate to replicate, but I travelled 2 times in train without mobile cover, and the mobile can't recovery the 3G connection after that. The terminal it's a BQ Ubuntu 14.10 (r20), last updated 3/19/15. Best regards! -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1424791 Title: Ubuntu Phone: cellular data did not recover after losing coverage Status in network-manager package in Ubuntu: Incomplete Bug description: Hi! Today I travelled in train and I lost my mobile signal. BUG: After have signal, the cellular data (3G) is not recovering. I have to enter in plane mode and exit from that mode for having 3G again. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1424791/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1431920] Re: Ubuntu Phone BQ: Message into welcome screen = No data sources available
I disabled a few weeks ago of reports into the welcome screen. I forgot that. But you could use a better message as: Data sources disabled :) ** Changed in: indicator-messages (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-messages in Ubuntu. https://bugs.launchpad.net/bugs/1431920 Title: Ubuntu Phone BQ: Message into welcome screen = No data sources available Status in indicator-messages package in Ubuntu: Invalid Bug description: Hi! From a 2 weeks I'm getting this unique message inside the circle on the welcome screen: No data sources available I'm so sorry, but I can't report steps in this case. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-messages/+bug/1431920/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
[Touch-packages] [Bug 1431920] [NEW] Ubuntu Phone BQ: Message into welcome screen = No data sources available
Public bug reported: Hi! From a 2 weeks I'm getting this unique message inside the circle on the welcome screen: No data sources available I'm so sorry, but I can't report steps in this case. Thanks in advance! ** Affects: indicator-messages (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Touch seeded packages, which is subscribed to indicator-messages in Ubuntu. https://bugs.launchpad.net/bugs/1431920 Title: Ubuntu Phone BQ: Message into welcome screen = No data sources available Status in indicator-messages package in Ubuntu: New Bug description: Hi! From a 2 weeks I'm getting this unique message inside the circle on the welcome screen: No data sources available I'm so sorry, but I can't report steps in this case. Thanks in advance! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-messages/+bug/1431920/+subscriptions -- Mailing list: https://launchpad.net/~touch-packages Post to : touch-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~touch-packages More help : https://help.launchpad.net/ListHelp
