date:20140918

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gstreamer (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mediascanner2 in Ubuntu.
https://bugs.launchpad.net/bugs/1364466

Title:
  /usr/bin/mediascanner-service-2.0:*** Error in `mediascanner-
  service-2.0': double free or corruption (fasttop): ADDR ***

Status in “gstreamer” package in Ubuntu:
  Confirmed
Status in “mediascanner2” package in Ubuntu:
  Invalid

Bug description:
  The Ubuntu Error Tracker has been receiving reports about a problem
  regarding mediascanner2.  This problem was most recently seen with
  version 0.104+14.10.20140825-0ubuntu1, the problem page at
  https://errors.ubuntu.com/problem/354f10fdaba609ee33dd0a2868637ec79c590b56
  contains more details.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gstreamer/+bug/1364466/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369539] Re: mediascanner-service-2.0 crashed while creating thumbnails

2014-09-18 Thread Jussi Pakkanen

*** This bug is a duplicate of bug 1364466 ***
https://bugs.launchpad.net/bugs/1364466

Mediascanner does not generate thumbnails. It has never done so, that is
thumbnailer's job.

What is happening here is that gstreamer metadata extractor is buggy and
crashes on some files. This is a known issue and Mediascanner has
protections against this as it remembers what files caused it to crash
and skips those. Marking as duplicate.

** This bug has been marked a duplicate of bug 1364466
   /usr/bin/mediascanner-service-2.0:*** Error in `mediascanner-service-2.0': 
double free or corruption (fasttop): ADDR ***

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mediascanner2 in Ubuntu.
https://bugs.launchpad.net/bugs/1369539

Title:
  mediascanner-service-2.0 crashed while creating thumbnails

Status in Media Scanner v2:
  New
Status in “mediascanner2” package in Ubuntu:
  New

Bug description:
  I paste new videos on my phone, open the video scope. The scope only
  showing four out of my seven videos. So basically mediascanner crashed
  while creating thumbnails.

  Also please ignore the launchpad messages, the bug was invalidated
  since it was reported from rtm branch. I have attached the .crash file
  for the developers ease.

  ProblemType: Crash
  DistroRelease: Ubuntu 14.10
  Package: mediascanner2.0 0.104+14.10.20140825-0ubuntu1 [origin: Ubuntu RTM]
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu1
  Architecture: armhf
  CurrentDesktop: Unity
  Date: Mon Sep 15 16:47:25 2014
  ExecutablePath: /usr/bin/mediascanner-service-2.0
  ExecutableTimestamp: 1409067989
  InstallationDate: Installed on 2014-09-15 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140915-030205)
  ProcCmdline: mediascanner-service-2.0
  ProcCwd: /home/phablet
  Signal: 6
  SourcePackage: mediascanner2
  StacktraceTop:
   ?? () from /lib/arm-linux-gnueabihf/libc.so.6
   raise () from /lib/arm-linux-gnueabihf/libc.so.6
   abort () from /lib/arm-linux-gnueabihf/libc.so.6
   ?? () from /lib/arm-linux-gnueabihf/libc.so.6
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip plugdev sudo tty video

To manage notifications about this bug go to:
https://bugs.launchpad.net/mediascanner2/+bug/1369539/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1359933] Re: [Hyper-V] hyperv_fb kernel module is not automatically loaded on Ubuntu 14.10

2014-09-18 Thread Martin Pitt

Fix committed to Debian and Ubuntu systemd packaging branches. I'll do
an utopic upload now.

** Changed in: systemd (Ubuntu Utopic)
   Status: In Progress = Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1359933

Title:
  [Hyper-V] hyperv_fb kernel module is not automatically loaded on
  Ubuntu 14.10

Status in “systemd” package in Ubuntu:
  Fix Committed
Status in “systemd” source package in Utopic:
  Fix Committed

Bug description:
  System details:
  Linux ubuntu 3.16.0-9-generic #14-Ubuntu SMP Fri Aug 15 15:03:57 UTC 2014 
x86_64 x86_64 x86_64 GNU/Linux
  Ubuntu Server 14.10 Daily build from 19th Aug.

  During the testing we've discovered that the hyperv_fb module is not 
automatically loaded by the system. 
  The module is used for the 2D FB functionality and in 14.04 and older it was 
loaded along with all the other Hyper-V LIS kernel modules.
  Please make the necessary corrections to include hyperv_fb as well.
  This affects all Windows Server editions, from 2008R2, WS 2012 and WS 2012 R2.

  The module is also used in runlevel 3, and our test setup has the X
  server and GUI installed.

  root@ubuntu:~# lsmod | grep hyperv_fb
  root@ubuntu:~#

  root@ubuntu:~# modprobe hyperv_fb

  root@ubuntu:~# modinfo hyperv_fb
  filename:   
/lib/modules/3.16.0-9-generic/kernel/drivers/video/fbdev/hyperv_fb.ko
  description:Microsoft Hyper-V Synthetic Video Frame Buffer Driver
  license:GPL
  srcversion: 7DB9F1496E075EBB679974C
  alias:  pci:v1414d5353svsdbc*sc*i*
  alias:  vmbus:02780ada77e3ac4a8e770558eb1073f8
  depends:hv_vmbus
  intree: Y
  vermagic:   3.16.0-9-generic SMP mod_unload modversions
  signer: Magrathea: Glacier signing key
  sig_key:2A:50:05:BD:65:41:55:43:B9:4A:39:62:EB:AC:4A:19:C5:06:CE:81
  sig_hashalgo:   sha512
  --- 
  ApportVersion: 2.14.6-0ubuntu1
  Architecture: amd64
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.10
  HibernationDevice: RESUME=/dev/mapper/ubuntu--vg-swap_1
  InstallationDate: Installed on 2014-08-19 (2 days ago)
  InstallationMedia: Ubuntu-Server 14.10 Utopic Unicorn - Alpha amd64 
(20140819)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
   
   virbr0no wireless extensions.
  Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize 
libusb: -99
  MachineType: Microsoft Corporation Virtual Machine
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 hyperv_fb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-9-generic 
root=/dev/mapper/hostname--vg-root ro crashkernel=128M@64M
  ProcVersionSignature: Ubuntu 3.16.0-9.14-generic 3.16.1
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-9-generic N/A
   linux-backports-modules-3.16.0-9-generic  N/A
   linux-firmware1.132
  RfKill:
   
  Tags:  utopic
  Uname: Linux 3.16.0-9-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 05/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 090006
  dmi.board.name: Virtual Machine
  dmi.board.vendor: Microsoft Corporation
  dmi.board.version: 7.0
  dmi.chassis.asset.tag: 1037-8395-2404-3263-1476-7555-72
  dmi.chassis.type: 3
  dmi.chassis.vendor: Microsoft Corporation
  dmi.chassis.version: 7.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr090006:bd05/23/2012:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0:
  dmi.product.name: Virtual Machine
  dmi.product.version: 7.0
  dmi.sys.vendor: Microsoft Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1359933/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1368243] Re: Scope consistently causes scope runner crash

2014-09-18 Thread Michi Henning

Could you post a stack trace of all threads?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-api in
Ubuntu.
https://bugs.launchpad.net/bugs/1368243

Title:
  Scope consistently causes scope runner crash

Status in “unity-scopes-api” package in Ubuntu:
  New

Bug description:
  Ubuntu 14.10 r29

  The Photos scope consistently causes scope runner crash. See
  attachment.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-scopes-api/+bug/1368243/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370911] [NEW] bluetooth headset (Motorola S10-HD) remains connected despite it appears disconnected

2014-09-18 Thread I Ahmad

Public bug reported:

bluetooth headset (Motorola S10-HD) remains connected despite it appears
disconnected

Steps to reproduce:

1. Pair the Motorola S10-HD with krillin
2. Now disconnect the headtset form bluetooth settings page.
3. Note that bt headset settings page shows that device is disconnected.
4. Now play some music track
Observe that music is still playing through bt headset while it is disconnected.

Build/Device Info:

phablet@ubuntu-phablet:~$ system-image-cli -i
current build number: 1
device name: krillin
channel: ubuntu-touch/ubuntu-rtm/14.09
last update: 2014-09-16 17:43:20
version version: 1
version ubuntu: 20140916
version device: 20140912-23825b8
version custom: 1410739265

Bluetooth Headset: Motorola S10-HD

** Affects: bluez (Ubuntu)
 Importance: High
 Status: New


** Tags: bluetooth qa-daily-testing rtm14

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1370911

Title:
  bluetooth headset (Motorola S10-HD) remains connected despite it
  appears disconnected

Status in “bluez” package in Ubuntu:
  New

Bug description:
  bluetooth headset (Motorola S10-HD) remains connected despite it
  appears disconnected

  Steps to reproduce:

  1. Pair the Motorola S10-HD with krillin
  2. Now disconnect the headtset form bluetooth settings page.
  3. Note that bt headset settings page shows that device is disconnected.
  4. Now play some music track
  Observe that music is still playing through bt headset while it is 
disconnected.

  Build/Device Info:

  phablet@ubuntu-phablet:~$ system-image-cli -i
  current build number: 1
  device name: krillin
  channel: ubuntu-touch/ubuntu-rtm/14.09
  last update: 2014-09-16 17:43:20
  version version: 1
  version ubuntu: 20140916
  version device: 20140912-23825b8
  version custom: 1410739265

  Bluetooth Headset: Motorola S10-HD

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1370911/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370912] [NEW] package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el paquete gdb-arm-none-eabi 7.6

2014-09-18 Thread slothy

Public bug reported:

???

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: gdb 7.7-0ubuntu3.1
ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
Uname: Linux 3.13.0-36-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.4
Architecture: amd64
Date: Thu Sep 18 08:58:21 2014
DistributionChannelDescriptor:
 # This is a distribution channel descriptor
 # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor
 canonical-oem-somerville-precise-amd64-20120703-2
DuplicateSignature: package:gdb:7.7-0ubuntu3.1:intentando sobreescribir 
`/usr/share/man/man1/gdb.1.gz', que está también en el paquete 
gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
ErrorMessage: intentando sobreescribir `/usr/share/man/man1/gdb.1.gz', que está 
también en el paquete gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
InstallationDate: Installed on 2013-07-21 (423 days ago)
InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
SourcePackage: gdb
Title: package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando 
sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el paquete 
gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
UpgradeStatus: Upgraded to trusty on 2014-03-04 (198 days ago)

** Affects: gdb (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gdb in Ubuntu.
https://bugs.launchpad.net/bugs/1370912

Title:
  package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando
  sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el
  paquete gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1

Status in “gdb” package in Ubuntu:
  New

Bug description:
  ???

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: gdb 7.7-0ubuntu3.1
  ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
  Uname: Linux 3.13.0-36-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  Date: Thu Sep 18 08:58:21 2014
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-precise-amd64-20120703-2
  DuplicateSignature: package:gdb:7.7-0ubuntu3.1:intentando sobreescribir 
`/usr/share/man/man1/gdb.1.gz', que está también en el paquete 
gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
  ErrorMessage: intentando sobreescribir `/usr/share/man/man1/gdb.1.gz', que 
está también en el paquete gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
  InstallationDate: Installed on 2013-07-21 (423 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
  SourcePackage: gdb
  Title: package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando 
sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el paquete 
gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
  UpgradeStatus: Upgraded to trusty on 2014-03-04 (198 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdb/+bug/1370912/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370912] Re: package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el paquete gdb-arm-none-eabi 7.6.5

2014-09-18 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gdb in Ubuntu.
https://bugs.launchpad.net/bugs/1370912

Title:
  package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando
  sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el
  paquete gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1

Status in “gdb” package in Ubuntu:
  New

Bug description:
  ???

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: gdb 7.7-0ubuntu3.1
  ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
  Uname: Linux 3.13.0-36-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  Date: Thu Sep 18 08:58:21 2014
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-precise-amd64-20120703-2
  DuplicateSignature: package:gdb:7.7-0ubuntu3.1:intentando sobreescribir 
`/usr/share/man/man1/gdb.1.gz', que está también en el paquete 
gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
  ErrorMessage: intentando sobreescribir `/usr/share/man/man1/gdb.1.gz', que 
está también en el paquete gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
  InstallationDate: Installed on 2013-07-21 (423 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
  SourcePackage: gdb
  Title: package gdb 7.7-0ubuntu3.1 failed to install/upgrade: intentando 
sobreescribir `/usr/share/man/man1/gdb.1.gz', que está también en el paquete 
gdb-arm-none-eabi 7.6.50.20131218-0ubuntu1+1
  UpgradeStatus: Upgraded to trusty on 2014-03-04 (198 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdb/+bug/1370912/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1328513] Re: Preview header title truncated

2014-09-18 Thread Ying-Chun Liu

Hi. Where's the link of the spec?
Currently I just remove the maxLineCount:2 in PreviewHeader. 
I'd like to read the spec to see what it really is.

** Branch linked: lp:~paulliu/unity8/preview_title_20140916

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1328513

Title:
  Preview header title truncated

Status in The Savilerow project:
  New
Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  When developing a news scope. The title in the grid card fits the
  news headline, but in the preview (the same text) the title gets
  truncated.

  This looks very strange and makes reading news hard tbh. Shouldnt we
  have a common behaviour (see attached files)

To manage notifications about this bug go to:
https://bugs.launchpad.net/savilerow/+bug/1328513/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 897548] Re: ibus-daemon crashed on startup with SIGABRT in g_assertion_message()

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: ibus (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ibus in Ubuntu.
https://bugs.launchpad.net/bugs/897548

Title:
  ibus-daemon crashed on startup with SIGABRT in g_assertion_message()

Status in “ibus” package in Ubuntu:
  Confirmed

Bug description:
  This crash occurs sometimes (without any obvious pattern) on KDE login
  when ibus-daemon is started.

  ProblemType: Crash
  DistroRelease: Ubuntu 11.10
  Package: ibus 1.3.99.20110419-1ubuntu3
  ProcVersionSignature: Ubuntu 3.0.0-13.22-generic-pae 3.0.6
  Uname: Linux 3.0.0-13-generic-pae i686
  NonfreeKernelModules: fglrx
  ApportVersion: 1.23-0ubuntu4
  Architecture: i386
  CrashCounter: 1
  Date: Tue Nov 29 10:10:40 2011
  ExecutablePath: /usr/bin/ibus-daemon
  ProcCmdline: /usr/bin/ibus-daemon -Rr --xim
  Signal: 6
  SourcePackage: ibus
  StacktraceTop:
   g_assertion_message (domain=0xb7427910 IBUS, file=0xb742c4cc ibusbus.c, 
line=242, func=0xb742c831 _connection_closed_cb, message=optimized out) at 
/build/buildd/glib2.0-2.30.0/./glib/gtestutils.c:1425
   g_assertion_message_expr (domain=0xb7427910 IBUS, file=0xb742c4cc 
ibusbus.c, line=242, func=0xb742c831 _connection_closed_cb, expr=0xb742bf18 
bus-priv-connection == connection) at 
/build/buildd/glib2.0-2.30.0/./glib/gtestutils.c:1436
   ?? () from /usr/lib/libibus-1.0.so.0
   ffi_call_SYSV () from /usr/lib/i386-linux-gnu/libffi.so.6
   ffi_call () from /usr/lib/i386-linux-gnu/libffi.so.6
  Title: ibus-daemon crashed with SIGABRT in g_assertion_message()
  UpgradeStatus: Upgraded to oneiric on 2011-10-14 (45 days ago)
  UserGroups: adm admin audio cdrom debian-transmission dialout fax floppy 
lpadmin plugdev sambashare scanner syslog vboxusers video wireshark

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/897548/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1328513] Re: Preview header title truncated

2014-09-18 Thread Albert Astals Cid

As far as i know the dash spec is at
https://docs.google.com/a/canonical.com/document/d/1n880Fih5KyGPcoP5chidnHDG_8TxXUgSuij7f4rHpuk/edit#heading=h.hkg31mf6kb78

Preview widgets starting at page 32 or something, i can't seem to find
what Mike was talking about.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1328513

Title:
  Preview header title truncated

Status in The Savilerow project:
  New
Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  When developing a news scope. The title in the grid card fits the
  news headline, but in the preview (the same text) the title gets
  truncated.

  This looks very strange and makes reading news hard tbh. Shouldnt we
  have a common behaviour (see attached files)

To manage notifications about this bug go to:
https://bugs.launchpad.net/savilerow/+bug/1328513/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370930] [NEW] apparmor cups samba problem no printing

2014-09-18 Thread Roger Tri

Public bug reported:

I configured a usb brother printer correctly (working) on ubuntu 14.04.1.
Then I installed a samba server to share this printer on a windows network
The samba printing from windows machines works correctly. The usb direct cups 
printing inform printing OK, jobs completed, but nothing prints. On syslog I 
see this apparmor DENIED messages:
Sep 18 08:51:57 gabi-K55A kernel: [  844.181601] type=1400 
audit(1411023117.729:74): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd
 name=/var/cache/samba/gencache.tdb pid=3353 comm=smb requested_mask=r 
denied_mask=r fsuid=7 ouid=0
Sep 18 08:51:57 gabi-K55A kernel: [  844.181649] type=1400 
audit(1411023117.729:75): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd
 name=/var/cache/samba/gencache.tdb pid=3353 comm=smb requested_mask=r 
denied_mask=r fsuid=7 ouid=0
Sep 18 08:51:57 gabi-K55A kernel: [  844.182286] type=1400 
audit(1411023117.729:76): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd
 name=/var/cache/samba/gencache.tdb pid=3353 comm=smb requested_mask=r 
denied_mask=r fsuid=7 ouid=0
Sep 18 08:54:04 gabi-K55A kernel: [  971.394145] type=1400 
audit(1411023244.943:77): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
sd pid=2034 comm=cupsd requested_mask=send denied_mask=send signal=term 
peer=unconfined
Sep 18 08:54:04 gabi-K55A kernel: [  971.394155] type=1400 
audit(1411023244.943:78): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
sd pid=2034 comm=cupsd requested_mask=send denied_mask=send signal=term 
peer=unconfined
Sep 18 08:54:04 gabi-K55A kernel: [  971.394161] type=1400 
audit(1411023244.943:79): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
sd pid=2034 comm=cupsd requested_mask=send denied_mask=send signal=term 
peer=unconfined
Sep 18 08:54:04 gabi-K55A kernel: [  971.394166] type=1400 
audit(1411023244.943:80): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
sd pid=2034 comm=cupsd requested_mask=send denied_mask=send signal=term 
peer=unconfined


I install with apt-get last apparmor profiles, but I get this messages yet, 
with the same result (no printing):
Sep 18 09:15:06 gabi-K55A kernel: [  100.620853] usblp0: removed
Sep 18 09:15:06 gabi-K55A kernel: [  100.878155] usblp 1-4:1.0: usblp0: USB 
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0037
Sep 18 09:16:39 gabi-K55A kernel: [  193.894732] type=1400 
audit(1411024599.437:117): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd name=/var/cache/samba/gencache.tdb pid=2384 
comm=smb requested_mask=r denied_mask=r fsuid=7 ouid=0

** Affects: cups (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apparmor cups samba

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1370930

Title:
  apparmor cups samba problem no printing

Status in “cups” package in Ubuntu:
  New

Bug description:
  I configured a usb brother printer correctly (working) on ubuntu 14.04.1.
  Then I installed a samba server to share this printer on a windows network
  The samba printing from windows machines works correctly. The usb direct cups 
printing inform printing OK, jobs completed, but nothing prints. On syslog I 
see this apparmor DENIED messages:
  Sep 18 08:51:57 gabi-K55A kernel: [  844.181601] type=1400 
audit(1411023117.729:74): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd
   name=/var/cache/samba/gencache.tdb pid=3353 comm=smb requested_mask=r 
denied_mask=r fsuid=7 ouid=0
  Sep 18 08:51:57 gabi-K55A kernel: [  844.181649] type=1400 
audit(1411023117.729:75): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd
   name=/var/cache/samba/gencache.tdb pid=3353 comm=smb requested_mask=r 
denied_mask=r fsuid=7 ouid=0
  Sep 18 08:51:57 gabi-K55A kernel: [  844.182286] type=1400 
audit(1411023117.729:76): apparmor=DENIED operation=open 
profile=/usr/sbin/cupsd
   name=/var/cache/samba/gencache.tdb pid=3353 comm=smb requested_mask=r 
denied_mask=r fsuid=7 ouid=0
  Sep 18 08:54:04 gabi-K55A kernel: [  971.394145] type=1400 
audit(1411023244.943:77): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
  sd pid=2034 comm=cupsd requested_mask=send denied_mask=send 
signal=term peer=unconfined
  Sep 18 08:54:04 gabi-K55A kernel: [  971.394155] type=1400 
audit(1411023244.943:78): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
  sd pid=2034 comm=cupsd requested_mask=send denied_mask=send 
signal=term peer=unconfined
  Sep 18 08:54:04 gabi-K55A kernel: [  971.394161] type=1400 
audit(1411023244.943:79): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
  sd pid=2034 comm=cupsd requested_mask=send denied_mask=send 
signal=term peer=unconfined
  Sep 18 08:54:04 gabi-K55A kernel: [  971.394166] type=1400 
audit(1411023244.943:80): apparmor=DENIED operation=signal 
profile=/usr/sbin/cup
  sd pid=2034 comm=cupsd requested_mask=send denied_mask=send 
signal=term

[Touch-packages] [Bug 845920] Re: Unity works very sloooooow.

2014-09-18 Thread no!chance

Since Ubuntu14.04 graphics is very slow on

1. a VMware  installation
2. on RS780 AMD graphics

On Ubuntu12.04 there was no problem, including watching movies with
RS780 graphics. With Ubuntu14.04 it is impossible (too slow).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/845920

Title:
  Unity works very sloow.

Status in Unity:
  Expired
Status in “unity” package in Ubuntu:
  Expired

Bug description:
  When I press Super button, dash will show only after 3-5 seconds.
  If I press alt+tab, list of windows shows afret 5 seconds or more.
  Pages in browser scrolls very slow. When I click on link, browser freezes on 
10 seconds (sometimes more, sometimes less). It's in all browsers (FF, Chrome, 
Opera).
  When I run gwibber (or some another program) I must wait more than 10 seconds 
while it loading.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: unity 4.12.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.0.0-10.16-generic 3.0.4
  Uname: Linux 3.0.0-10-generic i686
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: 
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86 Kernel Module  280.13  Wed Jul 27 16:55:43 PDT 
2011
   GCC version:  gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu2)
  .tmp.unity.support.test.0:
   
  Architecture: i386
  CompizPlugins: 
[core,bailer,detection,composite,opengl,compiztoolbox,decor,gnomecompat,grid,imgpng,mousepoll,move,place,regex,resize,session,snap,unitymtgrabhandles,vpswitch,wall,thumbnail,animation,expo,ezoom,fade,scale,unityshell,workarounds]
  CompositorRunning: compiz
  Date: Fri Sep  9 21:49:54 2011
  DistUpgraded: Fresh install
  DistroCodename: oneiric
  DistroVariant: ubuntu
  DkmsStatus:
   nvidia-current, 280.13, 3.0.0-10-generic, i686: installed
   nvidia-current, 280.13, 3.0.0-9-generic, i686: installed
  GraphicsCard:
   nVidia Corporation G86 [GeForce 8600M GS] [10de:0425] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: LG Electronics, Inc. Device [1854:0094]
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Beta i386 (20110901)
  JockeyStatus:
   xorg:nvidia_173 - NVIDIA accelerated graphics driver (Proprietary, Disabled, 
Not in use)
   xorg:nvidia_current-update - NVIDIA accelerated graphics driver 
(post-release updates) (Proprietary, Disabled, Not in use)
   xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, 
Enabled, Not in use)
   xorg:nvidia_173-update - NVIDIA accelerated graphics driver (post-release 
updates) (Proprietary, Disabled, Not in use)
  MachineType: LG Electronics R500-U.CP21R1
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcEnviron:
   PATH=(custom, no user)
   LANG=uk_UA.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-10-generic 
root=UUID=d1297443-a1be-403d-8941-167ab2a1acfa ro quiet splash vt.handoff=7
  SourcePackage: unity
  UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', 
'-f'] failed with exit code -11:
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/29/2007
  dmi.bios.vendor: Phoenix Technologies LTD
  dmi.bios.version: COLSSF10
  dmi.board.name: COLUMBIA
  dmi.board.vendor: LG Electronics
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LG Electronics
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvrCOLSSF10:bd08/29/2007:svnLGElectronics:pnR500-U.CP21R1:pvrNotApplicable:rvnLGElectronics:rnCOLUMBIA:rvrNotApplicable:cvnLGElectronics:ct10:cvrN/A:
  dmi.product.name: R500-U.CP21R1
  dmi.product.version: Not Applicable
  dmi.sys.vendor: LG Electronics
  version.compiz: compiz 1:0.9.5.92+bzr2791-0ubuntu2
  version.libdrm2: libdrm2 2.4.26-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 7.11-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 7.11-0ubuntu3
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg: xserver-xorg 1:7.6+7ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.6.0-1ubuntu13
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20110811.g93fc084-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.15.901-1ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20110411+8378443-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/845920/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 647437] Re: [ati] unity extremely slow

2014-09-18 Thread no!chance

Even the desktop edition has very poor graphics performance. On RS780
graphics, which was fast enough to view hd-movies in  Ubuntu12.04.

VMware graphics is EXTREME slow compared to ubuntu12.04.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/647437

Title:
  [ati] unity extremely slow

Status in Mutter:
  New
Status in Unity:
  Won't Fix
Status in “unity” package in Ubuntu:
  Won't Fix

Bug description:
  Binary package hint: unity

   Desktop edition works fine, but the netbook edition is extremely
  slow. I have an ATI HD3470 graphic card and use the latest fglrx
  driver. If I uses the free driver I get a corrupted display. I've
  never got unity or gnome shell to work properly in this laptop.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: unity 0.2.44-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic i686
  NonfreeKernelModules: fglrx
  Architecture: i386
  Date: Sat Sep 25 12:30:14 2010
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Beta i386 (20100901.1)
  ProcEnviron:
   LANG=fr_FR.utf8
   SHELL=/bin/bash
  SourcePackage: unity

To manage notifications about this bug go to:
https://bugs.launchpad.net/mutter/+bug/647437/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370940] [NEW] Sync librsvg 2.40.4-1 (main) from Debian unstable (main)

2014-09-18 Thread Rico Tzschichholz

Public bug reported:

Please sync librsvg 2.40.4-1 (main) from Debian unstable (main)

Changelog entries since current utopic version 2.40.3-1:

librsvg (2.40.4-1) unstable; urgency=medium

  * New upstream release.
  * Update Homepage: URL.

 -- Michael Biebl bi...@debian.org  Mon, 15 Sep 2014 01:00:54 +0200

librsvg (2.40.3-2) unstable; urgency=medium

  * Cherry-pick upstream fix to handle compressed input in rsvg-convert.
Closes: #760178

 -- Michael Biebl bi...@debian.org  Tue, 02 Sep 2014 00:27:37 +0200

** Affects: librsvg (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to librsvg in Ubuntu.
https://bugs.launchpad.net/bugs/1370940

Title:
  Sync librsvg 2.40.4-1 (main) from Debian unstable (main)

Status in “librsvg” package in Ubuntu:
  New

Bug description:
  Please sync librsvg 2.40.4-1 (main) from Debian unstable (main)

  Changelog entries since current utopic version 2.40.3-1:

  librsvg (2.40.4-1) unstable; urgency=medium

* New upstream release.
* Update Homepage: URL.

   -- Michael Biebl bi...@debian.org  Mon, 15 Sep 2014 01:00:54 +0200

  librsvg (2.40.3-2) unstable; urgency=medium

* Cherry-pick upstream fix to handle compressed input in rsvg-convert.
  Closes: #760178

   -- Michael Biebl bi...@debian.org  Tue, 02 Sep 2014 00:27:37 +0200

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/librsvg/+bug/1370940/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370146] Re: Adjust header behaviour UI in multi select mode

2014-09-18 Thread Tim Peeters

** Summary changed:

- [sdk] adjust behaviour  UI in multi select mode
+ Adjust header behaviour  UI in multi select mode

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1370146

Title:
  Adjust header behaviour  UI in multi select mode

Status in Address Book App:
  New
Status in Dialer app for Ubuntu Touch:
  New
Status in Messaging App:
  New
Status in Clock application for Ubuntu devices:
  In Progress
Status in Ubuntu UI Toolkit:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “address-book-app” package in Ubuntu:
  New
Status in “dialer-app” package in Ubuntu:
  New
Status in “messaging-app” package in Ubuntu:
  New
Status in “ubuntu-ui-toolkit” package in Ubuntu:
  New

Bug description:
  Steps to reproduce:

  1. Open Messaging app (or Address Book app, Phone app), make sure you have a 
list in your messages view
  2. Long press on any of the list items

  Actual Result:
  3. Header is changing and shows an X button on the left hand side and two 
action buttons on the right hand side. Selection checkboxes appear from the 
left hand side.

  Expected result - desired solution:
  - The header should display a BACK button instead of the X on the left hand 
side, same as we have in all other headers
  - Remove the change in the background colour when a list item is selected, 
change in the colour of the checkbox is enough
  - Add labels for all visible actions in this mode in the header, including 
BACK for the back button
  - Tapping on the BACK in this mode, cancels the multi-select mode and does 
NOT navigate back to the previous view
  - There is no title in this header

  Please see attached wireframe for reference. This change applies
  across all apps which use a multi select in their list views.

To manage notifications about this bug go to:
https://bugs.launchpad.net/address-book-app/+bug/1370146/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 160311] Re: Resizing windows by grabbing window borders is difficult

2014-09-18 Thread Melroy vd Berg

After 7 years it is finally confirmed! :O

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/160311

Title:
  Resizing windows by grabbing window borders is difficult

Status in Ayatana Design:
  Fix Released
Status in Decorator for compiz-fusion:
  New
Status in One Hundred Papercuts:
  Fix Released
Status in The Metacity Window Manager:
  In Progress
Status in Release Notes for Ubuntu:
  Fix Released
Status in Unity:
  Fix Released
Status in Unity 2D:
  Invalid
Status in “light-themes” package in Ubuntu:
  Fix Released
Status in “unity” package in Ubuntu:
  Confirmed

Bug description:
  This bug is fixed in unity-3d since ubuntu 11.04.
  It still exists in unity-2d and will never be fixed as unity-2d is no longer 
supported since ubuntu 12.10 (see comment #343).

  *

  This should mostly be fixed for Natty and might get backported to
  earlier releases as well.

  For Precise (12.04)  this is again broken for unity-2d (as of 17.7.2012 
unity-2d 5.12.0-0ubuntu1.1).
  Note that if the window has a scrollbar, you can grab that to resize the 
window. If not, you are stuck with the 1px border. Workaround: NONE KNOWN (see 
comment 320)?

  *

  *Blueprint for Natty, Ubuntu 11.04:

  https://blueprints.edge.launchpad.net/ubuntu/+spec/packageselection-
  dx-n-resizing-windows

  Work items1 * Make sure the new resize grip fits in current applications; 
doesn't interfere with anything. We should make some noise about this during 
the Natty cycle so people keep their eyes open and file bugs.
  2 * Invisible window resize area - around 3px invisible area to allow resize 
on all sides.

  *

  Working grip backported to gtk2 already available in ppa :
  https://launchpad.net/~bratsche/+archive/gtk

  *

  Workaround for Compiz/Unity: Alt+Middlemousebutton resizes a window
  most comfortably.

  Workaround:  Edit /usr/share/themes/Ambiance/metacity-1/metacity-
  theme-1.xml.  Set the following values in frame_geometry_normal as
  desired:

  distance name=left_width value=3/
  distance name=right_width value=3/
  distance name=bottom_height value=3/

  

  Binary package hint: metacity

  - The issue has been an issue for users (especially of large) screens
  for several releases- Trackpad users seem to be particularly impacted
  by this- The issue appears to have been significantly aggravated in
  Lucid by changing the border width from 3 pixels to 1 pixel

  The window borders in metacity are far too thin to be used for
  comfortable window resizing, and resize handles are not available in
  all applications (or even most). In fact, of all the windows I have
  open right now, not a single one of them has a resize handle. The
  result is that I get a lot of misses when I try to drag a window
  border, which usually results in my clicking on the wrong window
  altogether. The best fix for this usability bug is to create an
  invisible region around each non-maximized window about 4px thick
  that can be used for resizing (in addition to the visible border). Or
  perhaps there should be a border thickness option on the System 
  Preferences  Windows dialog (although the default thickness should
  still be increased considerably). Ideally all windows would also have
  a resize handle but I realize that these have to be application
  controlled (at least that seems to be the position of the metacity
  team).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ayatana-design/+bug/160311/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370941] [NEW] [systemd-boot] upstart crashed with SIGABRT in __libc_message()

2014-09-18 Thread dino99

Public bug reported:

crash on cold boot

ProblemType: Crash
DistroRelease: Ubuntu 14.10
Package: upstart-bin 1.13.2-0ubuntu1
ProcVersionSignature: Ubuntu 3.16.0-14.20-generic 3.16.2
Uname: Linux 3.16.0-16-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.14.7-0ubuntu2
Architecture: i386
CrashCounter: 1
CurrentDesktop: GNOME
Date: Thu Sep 18 09:52:00 2014
ExecutablePath: /sbin/upstart
ProcCmdline: upstart --user
Signal: 6
SourcePackage: upstart
StacktraceTop:
 __libc_message (do_abort=do_abort@entry=1, fmt=fmt@entry=0xb761e79c *** Error 
in `%s': %s: 0x%s ***\n) at ../sysdeps/posix/libc_fatal.c:175
 malloc_printerr (action=optimized out, str=0xb761a253 corrupted 
double-linked list, ptr=0xb816d300) at malloc.c:4996
 malloc_consolidate (av=av@entry=0xb7663420 main_arena) at malloc.c:4157
 _int_malloc (av=av@entry=0xb7663420 main_arena, bytes=bytes@entry=2057) at 
malloc.c:3423
 _int_realloc (av=av@entry=0xb7663420 main_arena, oldp=oldp@entry=0xb81727a0, 
oldsize=oldsize@entry=16, nb=nb@entry=2064) at malloc.c:4286
Title: upstart crashed with SIGABRT in __libc_message()
UpgradeStatus: No upgrade log present (probably fresh install)
UpstartBugCategory: Session
UpstartRunningSessionCount: 1
UpstartRunningSessionVersion: upstart 1.13.2
UpstartRunningSystemVersion: Error: command ['initctl', '--system', 'version'] 
failed with exit code 1: initctl: Name com.ubuntu.Upstart does not exist
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

** Affects: upstart (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-crash i386 need-i386-retrace systemd-boot third-party-packages 
utopic

** Information type changed from Private to Public

** Tags added: systemd-boot

** Summary changed:

- upstart crashed with SIGABRT in __libc_message()
+ [systemd-boot] upstart crashed with SIGABRT in __libc_message()

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/1370941

Title:
  [systemd-boot] upstart crashed with SIGABRT in __libc_message()

Status in “upstart” package in Ubuntu:
  New

Bug description:
  crash on cold boot

  ProblemType: Crash
  DistroRelease: Ubuntu 14.10
  Package: upstart-bin 1.13.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-14.20-generic 3.16.2
  Uname: Linux 3.16.0-16-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: i386
  CrashCounter: 1
  CurrentDesktop: GNOME
  Date: Thu Sep 18 09:52:00 2014
  ExecutablePath: /sbin/upstart
  ProcCmdline: upstart --user
  Signal: 6
  SourcePackage: upstart
  StacktraceTop:
   __libc_message (do_abort=do_abort@entry=1, fmt=fmt@entry=0xb761e79c *** 
Error in `%s': %s: 0x%s ***\n) at ../sysdeps/posix/libc_fatal.c:175
   malloc_printerr (action=optimized out, str=0xb761a253 corrupted 
double-linked list, ptr=0xb816d300) at malloc.c:4996
   malloc_consolidate (av=av@entry=0xb7663420 main_arena) at malloc.c:4157
   _int_malloc (av=av@entry=0xb7663420 main_arena, bytes=bytes@entry=2057) at 
malloc.c:3423
   _int_realloc (av=av@entry=0xb7663420 main_arena, 
oldp=oldp@entry=0xb81727a0, oldsize=oldsize@entry=16, nb=nb@entry=2064) at 
malloc.c:4286
  Title: upstart crashed with SIGABRT in __libc_message()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UpstartBugCategory: Session
  UpstartRunningSessionCount: 1
  UpstartRunningSessionVersion: upstart 1.13.2
  UpstartRunningSystemVersion: Error: command ['initctl', '--system', 
'version'] failed with exit code 1: initctl: Name com.ubuntu.Upstart does not 
exist
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/1370941/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370966] [NEW] Remnants of context menu remain on screen

2014-09-18 Thread Paul BROWN

Public bug reported:

Not sure what we were doing at the time, possibly checking some
bluetooth keyboards, when we noticed this problem. It was not killable
with xkill. It seems there was some app open that has menus: Minimize,
Maximize, Always On Top, Always on Visible Workspace, Only on This
Workspace, Close. “Show menubar” can be seen beneath this.  Anyway, this
app seems to have closed or something, and left bits of itself on the
screen.  Unfortunately just not sure what was going on at that point.

1)
kayttaja@kiertokone:~$ lsb_release -rd
Description:Ubuntu 14.04.1 LTS
Release:14.04

2)
kayttaja@kiertokone:~$ sudo apt-cache policy xorg
[sudo] password for kayttaja: 
xorg:
  Asennettu: 1:7.7+1ubuntu8
  Ehdokas:   1:7.7+1ubuntu8
  Versiotaulukko:
 *** 1:7.7+1ubuntu8 0
500 http://fi.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages
100 /var/lib/dpkg/status

3) Expected window manager (or something) to remove all traces of dead
app.

4) Traces of dead app left on the screen.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8
ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
Uname: Linux 3.13.0-32-generic i686
.tmp.unity.support.test.0:
 
ApportVersion: 2.14.1-0ubuntu3.4
Architecture: i386
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
Date: Thu Sep 18 11:31:04 2014
DistUpgraded: Fresh install
DistroCodename: trusty
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes
GraphicsCard:
 Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] 
(rev 04) (prog-if 00 [VGA controller])
   Subsystem: Dell Device [1028:0179]
   Subsystem: Dell Device [1028:0179]
InstallationDate: Installed on 2014-09-12 (5 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release i386 (20140722.2)
MachineType: Dell Inc. OptiPlex GX280
ProcEnviron:
 LANGUAGE=fi
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=fi_FI.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic 
root=UUID=092e3914-a390-4403-8451-3e08a7666711 ro quiet splash vt.handoff=7
SourcePackage: xorg
Symptom: display
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 02/09/2005
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A04
dmi.board.name: 0G8310
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA04:bd02/09/2005:svnDellInc.:pnOptiPlexGX280:pvr:rvnDellInc.:rn0G8310:rvr:cvnDellInc.:ct3:cvr:
dmi.product.name: OptiPlex GX280
dmi.sys.vendor: Dell Inc.
version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1
version.libdrm2: libdrm2 2.4.52-1
version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1
version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1.1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2
xserver.bootTime: Wed Sep 17 14:43:02 2014
xserver.configfile: default
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 product id   16455 
 vendor DEL
xserver.version: 2:1.15.1-0ubuntu2.1

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug compiz-0.9 corruption i386 trusty ubuntu

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1370966

Title:
  Remnants of context menu remain on screen

Status in “xorg” package in Ubuntu:
  New

Bug description:
  Not sure what we were doing at the time, possibly checking some
  bluetooth keyboards, when we noticed this problem. It was not
  killable with xkill. It seems there was some app open that has
  menus: Minimize, Maximize, Always On Top, Always on Visible Workspace,
  Only on This Workspace, Close. “Show menubar” can be seen beneath
  this.  Anyway, this app seems to have closed or something, and left
  bits of itself on the screen.  Unfortunately just not sure what was
  going on at that point.

  1)
  kayttaja@kiertokone:~$ lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  2)
  kayttaja@kiertokone:~$ sudo apt-cache policy xorg
  [sudo] password for kayttaja: 
  xorg:
Asennettu: 1:7.7+1ubuntu8
Ehdokas:   1:7.7+1ubuntu8
Versiotaulukko:
   *** 1:7.7+1ubuntu8 0
  500 http://fi.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages
  100

[Touch-packages] [Bug 1370966] Re: Remnants of context menu remain on screen

2014-09-18 Thread Paul BROWN

Screenshot showing the problem

** Attachment added: Tmp.png
   
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1370966/+attachment/4207272/+files/Tmp.png

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1370966

Title:
  Remnants of context menu remain on screen

Status in “xorg” package in Ubuntu:
  New

Bug description:
  Not sure what we were doing at the time, possibly checking some
  bluetooth keyboards, when we noticed this problem. It was not
  killable with xkill. It seems there was some app open that has
  menus: Minimize, Maximize, Always On Top, Always on Visible Workspace,
  Only on This Workspace, Close. “Show menubar” can be seen beneath
  this.  Anyway, this app seems to have closed or something, and left
  bits of itself on the screen.  Unfortunately just not sure what was
  going on at that point.

  1)
  kayttaja@kiertokone:~$ lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  2)
  kayttaja@kiertokone:~$ sudo apt-cache policy xorg
  [sudo] password for kayttaja: 
  xorg:
Asennettu: 1:7.7+1ubuntu8
Ehdokas:   1:7.7+1ubuntu8
Versiotaulukko:
   *** 1:7.7+1ubuntu8 0
  500 http://fi.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages
  100 /var/lib/dpkg/status

  3) Expected window manager (or something) to remove all traces of dead
  app.

  4) Traces of dead app left on the screen.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic i686
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: i386
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu Sep 18 11:31:04 2014
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] 
(rev 04) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:0179]
 Subsystem: Dell Device [1028:0179]
  InstallationDate: Installed on 2014-09-12 (5 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release i386 
(20140722.2)
  MachineType: Dell Inc. OptiPlex GX280
  ProcEnviron:
   LANGUAGE=fi
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=fi_FI.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic 
root=UUID=092e3914-a390-4403-8451-3e08a7666711 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/09/2005
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A04
  dmi.board.name: 0G8310
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA04:bd02/09/2005:svnDellInc.:pnOptiPlexGX280:pvr:rvnDellInc.:rn0G8310:rvr:cvnDellInc.:ct3:cvr:
  dmi.product.name: OptiPlex GX280
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Wed Sep 17 14:43:02 2014
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16455 
   vendor DEL
  xserver.version: 2:1.15.1-0ubuntu2.1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1370966/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370386] Re: libmirclient7 hang on client startup

2014-09-18 Thread Thomas Hellström

OK, so from within 14.10 things appear to work OK. XMir fires up as
well, so feel free to close this bug if desired.

Thanks,
Thomas

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mir in Ubuntu.
https://bugs.launchpad.net/bugs/1370386

Title:
  libmirclient7 hang on client startup

Status in Mir:
  New
Status in “mir” package in Ubuntu:
  New

Bug description:
  When starting up a mir 7 client on vmware (Ubuntu 14.04) it hangs in
  the following location:

  at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
  185   ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: No such 
file or directory.
  (gdb) bt
  #0  pthread_cond_wait@@GLIBC_2.3.2 ()
  at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
  #1  0x7679266c in 
std::condition_variable::wait(std::unique_lockstd::mutex) ()
 from /usr/lib/x86_64-linux-gnu/libstdc++.so.6
  #2  0x77b92e9b in MirWaitHandle::wait_for_all() ()
 from /usr/lib/x86_64-linux-gnu/libmirclient.so.7
  #3  0x00401027 in demo_client ()
  #4  0x00400e97 in main ()

  (This is mir_demo_client_basic from the mir_demos package)

  The mir_demo_standalone_* applications seem to work fine, and the
  mir_demo_server_* applications seem to be running nicely with a
  visible mouse cursor.

  This also happens with XMir, which is the most annoying part.

  It appears to be a regression, since I'm sure I had this running on an
  earlier update snapshot of Ubuntu 14.04

  Thanks,
  Thomas

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1370386/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1365929] Re: Dash headers incorrect layout

2014-09-18 Thread Joshua Gimenez

Just to give a little more detail. Basically, currently the partner
header logos appear to be too large. By matching the dimensions
specified above this should improve things.

The header should be 7GU in height and there should be 1.5GU of top and
bottom padding above and below the partner logo which should fill the
space.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1365929

Title:
  Dash headers incorrect layout

Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  In Progress

Bug description:
  The header height should be 7GU (It appears it may be currently set to
  6.5GU).

  Partner logos should have 1.5GU of padding on both the top and bottom.
  This is to prevent partners uploading huge logos that fill the entire
  vertical space.

  For partners with particularly large logos e.g. Wikipedia, we can
  tweak them to include padding within them and hence reduce their size.
  This is something we looked at a little while ago and adjusted some of
  them accordingly.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1365929/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370978] [NEW] App carousel showing both app and app start animation

2014-09-18 Thread Tomas Öqvist

Public bug reported:

Mako with MultiROM, r245

Since devel-proposed r243 or r244 a number of apps including GMail,
Google+, Calendar, System Settings and Messaging get a duplicate
instance in the app carousel showing the app start animation window.
Tapping on such a window takes me to the app that is running, but the
app carousel looks very crowded.

** Affects: ubuntu-ui-toolkit (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-ui-toolkit in
Ubuntu.
https://bugs.launchpad.net/bugs/1370978

Title:
  App carousel showing both app and app start animation

Status in “ubuntu-ui-toolkit” package in Ubuntu:
  New

Bug description:
  Mako with MultiROM, r245

  Since devel-proposed r243 or r244 a number of apps including GMail,
  Google+, Calendar, System Settings and Messaging get a duplicate
  instance in the app carousel showing the app start animation window.
  Tapping on such a window takes me to the app that is running, but the
  app carousel looks very crowded.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1370978/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1354046] Re: no 3d acceleration with error [drm:intel_dp_start_link_train] ERROR too many full retries, give up

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xorg (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1354046

Title:
  no 3d acceleration with error [drm:intel_dp_start_link_train] *ERROR*
  too many full retries, give up

Status in “xorg” package in Ubuntu:
  Confirmed

Bug description:
  Description:
  3D games, video (especially flash) makes computer unresponsive. The problem 
has been present since upgrade to Utopic, but have recently become worse, maybe 
 because of error message

  [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up

  which appears in all terminals.

  How to reproduce:
  Start a 1080p video. e.g. Note that the video is not run from an encrypted 
folder.
  Or watch a video on youtube.
  Reproducable for new users as well, so not related to /home/$USER

  What happens:
  Usage on all four CPUs on my DELL XPS 13 DEVELOPER EDITION will be between 
30% and 100%.

  What I expected:
  Expected same 3D performance as on Thrusty.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.16.0-6.11-generic 3.16.0-rc7
  Uname: Linux 3.16.0-6-generic x86_64
  .tmp.unity.support.test.0:

  ApportVersion: 2.14.5-0ubuntu3
  Architecture: amd64
  BootLog:
   Scanning for Btrfs filesystems
    * Setting up X socket directories...   [240G
  [234G[ OK ]
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu Aug  7 17:03:51 2014
  DistUpgraded: Fresh install
  DistributionChannelDescriptor:
   # This is a distribution channel descriptor
   # For more information see 
http://wiki.ubuntu.com/DistributionChannelDescriptor
   canonical-oem-somerville-precise-amd64-20120703-2
  DistroCodename: utopic
  DistroVariant: ubuntu
  DkmsStatus:
   vboxhost, 4.3.12, 3.13.0-24-generic, x86_64: installed
   vboxhost, 4.3.12, 3.13.0-27-generic, x86_64: installed
   vboxhost, 4.3.12, 3.13.0-29-generic, x86_64: installed
   vboxhost, 4.3.12, 3.16.0-5-generic, x86_64: installed
   vboxhost, 4.3.12, 3.16.0-6-generic, x86_64: installed
  EcryptfsInUse: Yes
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
     Subsystem: Dell Device [1028:058b]
  InstallationDate: Installed on 2013-08-27 (345 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120703-15:08
  MachineType: Dell Inc. Dell System XPS L322X
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-6-generic 
root=UUID=221de9c1-f10a-4be4-9273-5c12864c8680 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  SystemImageInfo: Error: [Errno 2] No such file or directory: 
'system-image-cli'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/15/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A09
  dmi.board.name: 0PJHXN
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA09:bd05/15/2013:svnDellInc.:pnDellSystemXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System XPS L322X
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.11+14.10.20140707-0ubuntu1b1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.54-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.2.3-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 
10.0.0-1ubuntu2
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.2.3-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu9
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Thu Aug  7 16:54:59 2014
  xserver.configfile: default
  xserver.errors:
   intel: Failed to load module dri3 (module does not exist, 0)
   intel: Failed to load module present (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id4933
   vendor CMN
  xserver.version: 2:1.15.1-0ubuntu9

To manage notifications about this bug go to:

[Touch-packages] [Bug 302177] Re: file command doesn't recognize .ogg anymore

2014-09-18 Thread Bug Watch Updater

** Changed in: file (Debian)
   Status: Incomplete = Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to file in Ubuntu.
https://bugs.launchpad.net/bugs/302177

Title:
  file command doesn't recognize .ogg anymore

Status in “file” package in Ubuntu:
  Fix Released
Status in “file” package in Debian:
  Fix Released

Bug description:
  Ubuntu version : Intrepid

  file and libmagic1 version : 4.24-4

  When I want to have informations from a .ogg audio file, I use the
  file command from terminal. But now, with this version, it doesn't
  recognize ogg anymore.

  In Hardy, for example, I had :

Ogg data, Vorbis audio, stereo, 44100 Hz, ~112000 bps, created
  by: Xiph.Org libVorbis I

  In Intrepid, I have :

data

  When I ask file --mime-type about a .ogg audio file, I only have the
  answer : application/octet-stream

  And of course programs based upon file/libmagic1 don't work anymore
  with ogg, like the excellent audio converter Xcfa.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/file/+bug/302177/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1125944] Re: (gedit:3366): IBUS-WARNING **: The owner of ~/.config/ibus/bus is not root!

2014-09-18 Thread era

** Description changed:

+ This is Won't Fix because it is the symptom of a user error.
+ 
+ As indicated repeatedly in the comments below, you should not use sudo
+ gedit (or if you do, you should be able to live with this error
+ message).
+ 
+ The proper way to run a GUI tool with elevated privileges is with sudo
+ -i or gksudo.
+ 
+ Original problem description follows.
+ 
+ 
+ 
  RR i386 logged as gnome-classic (fallback)
  
  Seen that error for the first time while using a terminal:
  
  oem@oem-desktop:~$ sudo gedit /etc/default/grub
  
  (gedit:3366): IBUS-WARNING **: The owner of /home/oem/.config/ibus/bus
  is not root!
  
  That one is own by Me (screenshot joined)
  
  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: ibus 1.4.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.8.0-6.13-generic 3.8.0-rc7
  Uname: Linux 3.8.0-6-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.8-0ubuntu4
  Architecture: i386
  Date: Fri Feb 15 08:33:36 2013
  MarkForUpload: True
  SourcePackage: ibus
  UpgradeStatus: No upgrade log present (probably fresh install)

** Changed in: ibus (Ubuntu)
 Assignee: chenwencai (13738772233-p) = (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ibus in Ubuntu.
https://bugs.launchpad.net/bugs/1125944

Title:
  (gedit:3366): IBUS-WARNING **: The owner of ~/.config/ibus/bus is not
  root!

Status in “ibus” package in Ubuntu:
  Won't Fix

Bug description:
  This is Won't Fix because it is the symptom of a user error.

  As indicated repeatedly in the comments below, you should not use
  sudo gedit (or if you do, you should be able to live with this error
  message).

  The proper way to run a GUI tool with elevated privileges is with sudo
  -i or gksudo.

  Original problem description follows.

  

  RR i386 logged as gnome-classic (fallback)

  Seen that error for the first time while using a terminal:

  oem@oem-desktop:~$ sudo gedit /etc/default/grub

  (gedit:3366): IBUS-WARNING **: The owner of /home/oem/.config/ibus/bus
  is not root!

  That one is own by Me (screenshot joined)

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: ibus 1.4.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.8.0-6.13-generic 3.8.0-rc7
  Uname: Linux 3.8.0-6-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.8-0ubuntu4
  Architecture: i386
  Date: Fri Feb 15 08:33:36 2013
  MarkForUpload: True
  SourcePackage: ibus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1125944/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

** Summary changed:

- continuous re-exec can result in a build-up of inotify fds
+ continuous re-exec can result in a build-up of inotify fds [SRU]

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/1338637

Title:
  continuous re-exec can result in a build-up of inotify fds [SRU]

Status in Upstart:
  Fix Released
Status in “upstart” package in Ubuntu:
  New
Status in “upstart” source package in Trusty:
  New

Bug description:
  $ sudo ls -al /proc/1/fd|grep anon|wc -l
  2

  $ i=0; while [ $i -lt 1024 ]; do sudo telinit u; i=$((i+1)); done

  $ sudo ls -al /proc/1/fd|grep anon|wc -l
  106

To manage notifications about this bug go to:
https://bugs.launchpad.net/upstart/+bug/1338637/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371011] [NEW] Sync telepathy-glib 0.24.1-1 (main) from Debian unstable (main)

2014-09-18 Thread Rico Tzschichholz

Public bug reported:

Please sync telepathy-glib 0.24.1-1 (main) from Debian unstable (main)

Changelog entries since current utopic version 0.24.0-1:

telepathy-glib (0.24.1-1) unstable; urgency=medium

  * New upstream stable release
  * debian/copyright: clean up syntax (*.[ch] is unsupported),
drop deleted files
  * debian/watch: only match 0.x versions, 1.0 will be a separate
source package

 -- Simon McVittie s...@debian.org  Tue, 16 Sep 2014 15:49:50 +0100

** Affects: telepathy-glib (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to telepathy-glib in Ubuntu.
https://bugs.launchpad.net/bugs/1371011

Title:
  Sync telepathy-glib 0.24.1-1 (main) from Debian unstable (main)

Status in “telepathy-glib” package in Ubuntu:
  New

Bug description:
  Please sync telepathy-glib 0.24.1-1 (main) from Debian unstable (main)

  Changelog entries since current utopic version 0.24.0-1:

  telepathy-glib (0.24.1-1) unstable; urgency=medium

* New upstream stable release
* debian/copyright: clean up syntax (*.[ch] is unsupported),
  drop deleted files
* debian/watch: only match 0.x versions, 1.0 will be a separate
  source package

   -- Simon McVittie s...@debian.org  Tue, 16 Sep 2014 15:49:50 +0100

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/telepathy-glib/+bug/1371011/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370473] Re: Skip entering a passcode/passphrase during edge demo

2014-09-18 Thread Olga Kemmet

** Changed in: ubuntu-ux
 Assignee: (unassigned) = Olga Kemmet (olga-kemmet)

** Changed in: ubuntu-ux
   Importance: Undecided = High

** Changed in: ubuntu-ux
   Status: New = Triaged

** Summary changed:

- Skip entering a passcode/passphrase during edge demo
+ [wizard] Skip entering a passcode/passphrase during edge demo

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1370473

Title:
  [wizard] Skip entering a passcode/passphrase during edge demo

Status in Ubuntu UX bugs:
  Triaged
Status in “unity8” package in Ubuntu:
  New

Bug description:
  The Edge demo is a bit confusing if you have a device pin since you
  get the device pin window in there and you think the demo has ended
  and then continues.

  Maybe there should be an extra step in there that says enter your
  pin?

  Or maybe i'm just being weird and it's not confusing :D

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1370473/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369224] Re: rsync preserve permission does not work

2014-09-18 Thread Robie Basak

Thank you for your report.

The -p is defined to replicate permission bits, not user or group
ownership. You want -pog for permissions and user and group ownership.

Since rsync is working as defined here, I don't think this is a bug. If
you disagree, please explain and reopen.

** Changed in: rsync (Ubuntu)
   Status: New = Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to rsync in Ubuntu.
https://bugs.launchpad.net/bugs/1369224

Title:
  rsync preserve permission does not work

Status in “rsync” package in Ubuntu:
  Invalid

Bug description:
  Hi,

  I am a regular user of rsync on various systems, giving parameters
  '-prH' or '-prHl' to shift data over to other locations while
  retaining correct permissions.

  Today (Ubuntu 14.04.1 64 bits, rsync 3.1.0) I descovered the '-p'
  parameter is not working. As root I'm copying the contents of the home
  directory to a new location, but the owner/group is set as root.root,
  not the intended user.

  This is incorrect operation, and can be problematic for people who
  automatically schedule rsync operations.

  I can work around this (using tar and untar), but that is not as
  cool/simple/efficient as using rsync.

  Greetings,

  Gerben

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: rsync 3.1.0-2ubuntu0.1
  ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
  Uname: Linux 3.13.0-35-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  Date: Sun Sep 14 09:30:16 2014
  InstallationDate: Installed on 2014-04-21 (146 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: rsync
  UpgradeStatus: No upgrade log present (probably fresh install)
  mtime.conffile..etc.default.rsync: 2014-04-21T09:49:59

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rsync/+bug/1369224/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1365558] Re: Some video format plays correctly but have no preview in scope.

2014-09-18 Thread Jean-Baptiste Lallement

** Tags added: multimedia

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gst-plugins-bad1.0 in
Ubuntu.
https://bugs.launchpad.net/bugs/1365558

Title:
  Some video format plays correctly but have no preview in scope.

Status in “gst-plugins-bad1.0” package in Ubuntu:
  Fix Released

Bug description:
  krillin: #11

  Some video format plays correctly in mediaplayer but don't show any
  preview or a generic icon in the scope.

  This is the case for the following videos from samplemedia.linaro.org

  ./H264/big_buck_bunny_480p_H264_AAC_25fps_1800K_short.MP4 h264 / aac
  ./H264/big_buck_bunny_720p_H264_AAC_25fps_3400K_short.MP4 h264 / aac
  ./Mmtest/media_api/video/H264_320_AAC_64.3gp h264 / aac
  ./H264/SVT/baseline/in_to_tree_420_720p25.mkv h264 / no audio stream
  ./H264/Sintel_1080p_H264_24fps.mkvh264 / ac3

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: thumbnailer-service 1.2+14.10.20140814-0ubuntu1 [origin: Ubuntu RTM]
  Uname: Linux 3.4.67 armv7l
  ApportVersion: 2.14.7-0ubuntu1
  Architecture: armhf
  Date: Thu Sep  4 17:19:39 2014
  InstallationDate: Installed on 2014-09-04 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140904-030254)
  SourcePackage: thumbnailer
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gst-plugins-bad1.0/+bug/1365558/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370146] Re: Adjust header behaviour UI in multi select mode

2014-09-18 Thread Tim Peeters

At the previous London sprint we decided to do the header modes after
rtm, so I did not work on this yet.

With this new planning, I'll start on this bug the coming week (there is
some other header work ongoing now which is better to land first).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1370146

Title:
  Adjust header behaviour  UI in multi select mode

Status in Address Book App:
  New
Status in Dialer app for Ubuntu Touch:
  New
Status in Messaging App:
  New
Status in Clock application for Ubuntu devices:
  In Progress
Status in Ubuntu UI Toolkit:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “address-book-app” package in Ubuntu:
  New
Status in “dialer-app” package in Ubuntu:
  New
Status in “messaging-app” package in Ubuntu:
  New
Status in “ubuntu-ui-toolkit” package in Ubuntu:
  New

Bug description:
  Steps to reproduce:

  1. Open Messaging app (or Address Book app, Phone app), make sure you have a 
list in your messages view
  2. Long press on any of the list items

  Actual Result:
  3. Header is changing and shows an X button on the left hand side and two 
action buttons on the right hand side. Selection checkboxes appear from the 
left hand side.

  Expected result - desired solution:
  - The header should display a BACK button instead of the X on the left hand 
side, same as we have in all other headers
  - Remove the change in the background colour when a list item is selected, 
change in the colour of the checkbox is enough
  - Add labels for all visible actions in this mode in the header, including 
BACK for the back button
  - Tapping on the BACK in this mode, cancels the multi-select mode and does 
NOT navigate back to the previous view
  - There is no title in this header

  Please see attached wireframe for reference. This change applies
  across all apps which use a multi select in their list views.

To manage notifications about this bug go to:
https://bugs.launchpad.net/address-book-app/+bug/1370146/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

** Description changed:

+ = PROBLEM =
+ 
+ The version of Upstart currently in trusty (1.12.1-0ubuntu4.2) suffers
+ from a couple of problems which in combination could make upgrading
+ difficult on systems with high uptimes.
+ 
+ The 2 issues are:
+ 
+ == bug 901038 ==
+ 
+ The issue here is that telinit in trusty is not fully synchronous. This
+ is not normally a problem. However if Upstart is re-exec'ed using
+ 'telinit u', as is done by the maintainer scripts for the following 
packages...
+ 
+   - libc6
+   - libdbus-1-3
+   - libjson-c2
+   - libnih1
+   - libnih-dbus1
+   - libselinux1
+   - libsepol1
+   - upstart
+ 
+ ... and if that operation is slow (it is normally extremely fast),
+ subsequent package upgrades (part of the same apt-get run) which *also*
+ need to restart Upstart may fail since 'telinit u' is unable to connect
+ to PID 1 as a result of Upstart still being in the process of
+ re-exec'ing from the last call to 'telinit u'.
+ 
+ 
+ == bug 1338637 ==
+ 
+ This bug only really affects server systems which have high uptimes. If
+ a re-exec is triggered via 'telinit u' as part of a package upgrade (see
+ above), Upstart will consume 2 additional inotify watches. Although this
+ doesn't affect the correct behaviour of Upstart, it does have two
+ repercussions:
+ 
+ a) It wastes inotify watches.
+ b) It slows down an Upstart re-exec ('telinit u').
+ 
+ Note that the slow-down for a vanilla Trusty server may not be
+ detectable unless the value of /proc/sys/fs/inotify/max_user_instances
+ has been raised above the default value of 128.
+ 
+ 
+ = FIX DETAILS =
+ 
+ == bug 901038 ==
+ 
+ The fix for this bug now makes 'telinit u' block until the re-exec
+ operation has completed fully.
+ 
+ Technically, it is not possible to make 'telinit u' synchronous since
+ because D-Bus connections cannot be serialised and since the 'telinit u'
+ request is made via a D-Bus connection, when Upstart re-exec's, it has
+ to sever all D-Bus connections, including the 'telinit u' D-Bus
+ connection. As such, 'telinit u' now performs the following operations:
+ 
+   - Requests synchronously that Upstart re-exec itself.
+   - Polls Upstart forever by attempting to connect to PID 1 and if
+ that operation fails, waiting for a period, the retrying.
+ 
+ The code is well commented to explain this less-than-ideal but
+ nonetheless essential poll operation:
+ 
+   http://bazaar.launchpad.net/~upstart-
+ devel/upstart/trunk/view/head:/util/telinit.c#L171
+ 
+ == bug 1338637 ==
+ 
+ This was a simple bug fix.
+ 
+ 
+ = FIX AVAILABILITY =
+ 
+ TBD.
+ 
+ 
+ = IMPACT =
+ 
+ On a high uptime server, the more times that 'telinit u' is called (as
+ the result of normal apt-get updates to any of the packages listed under
+ bug 901038 above), the slower the operation will take to complete, and
+ thus the likelihood of bug 901038 being seen will increase.
+ 
+ 
+ = JUSTIFICATION =
+ 
+ System updates need to just work. However, as outlined above, the
+ longer a systems uptime, the more likely it is to be affected by this
+ issue which increases the likelihood of a system update failure.
+ 
+ This issue needs to be fixed as soon as possible to minimise issues for
+ trusty users and administrators, particularly before any potential
+ upgrade to Utopic.
+ 
+ 
+ = TEST CASE =
+ 
+ == To demonstrate bug 1338637 ==
+ 
+ $ sudo telinit u
+ $ sudo ls -l /proc/1/fd|grep inotify|wc -l
+ 
+ The correct output from the above 2 commands should be simply 2.
+ 
+ However, on trusty systems, if the commands above are run after a fresh
+ boot, the value will in all likelihood be 4. Also, every subsequent
+ 'telinit u' will increase the number displayed by 2.
+ 
+ == To demonstrate bug 901038 ==
+ 
+ for i in $(seq 10); do telinit u; done
+ 
+ There should be no output from the command-line above, but on a trusty
+ system the chances are that one or more lines will display like this:
+ 
+ $ for i in $(seq 5); do sudo telinit u;done
+ telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
+ telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
+ telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
+ 
+ == To prove the overall problem has been fixed ==
+ 
+ 1) Download the attached force-reexec.sh onto a trusty system.
+ 2) Make executable:
+ 
+$ chmod 755 ./force-reexec.sh
+ 
+ 3) Run script as root, specifying a number of iterations (100) and
+saving output to file ./typescript.bad:
+ 
+$ script -c 'sudo ./force-reexec.sh 100' typescript.bad
+ 
+ 4) Upgrade to latest version of Upstart that fixes the 2 bugs.
+ 
+ 5) Reboot.
+ 
+ 6) Re-run the script
+ 
+$ script -c 'sudo ./force-reexec.sh 100' typescript.good
+ 
+ 7) Check the results:
+ 
+- file typescript.bad will show an increasing number of watches
+  and *MAY* show a slowly increasing restart time (depending on 
+  the value of /proc/sys/fs/inotify/max_user_instances (see above)).
+ 
+

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

** Attachment added: Output of force-reexec.sh on a trusty system with fixes
for both bugs, showing the problem has been resolved.

https://bugs.launchpad.net/upstart/+bug/1338637/+attachment/4207317/+files/typescript.good

** Description changed:

= PROBLEM =

The version of Upstart currently in trusty (1.12.1-0ubuntu4.2) suffers
from a couple of problems which in combination could make upgrading
difficult on systems with high uptimes.

The 2 issues are:

== bug 901038 ==

The issue here is that telinit in trusty is not fully synchronous. This
is not normally a problem. However if Upstart is re-exec'ed using
'telinit u', as is done by the maintainer scripts for the following
packages...

- - libc6
- - libdbus-1-3
- - libjson-c2
- - libnih1
- - libnih-dbus1
- - libselinux1
- - libsepol1
- - upstart
+ - libc6
+ - libdbus-1-3
+ - libjson-c2
+ - libnih1
+ - libnih-dbus1
+ - libselinux1
+ - libsepol1
+ - upstart

... and if that operation is slow (it is normally extremely fast),
subsequent package upgrades (part of the same apt-get run) which *also*
need to restart Upstart may fail since 'telinit u' is unable to connect
to PID 1 as a result of Upstart still being in the process of
re-exec'ing from the last call to 'telinit u'.
-

== bug 1338637 ==

This bug only really affects server systems which have high uptimes. If
a re-exec is triggered via 'telinit u' as part of a package upgrade (see
above), Upstart will consume 2 additional inotify watches. Although this
doesn't affect the correct behaviour of Upstart, it does have two
repercussions:

a) It wastes inotify watches.
b) It slows down an Upstart re-exec ('telinit u').

Note that the slow-down for a vanilla Trusty server may not be
detectable unless the value of /proc/sys/fs/inotify/max_user_instances
has been raised above the default value of 128.

-
= FIX DETAILS =

== bug 901038 ==

The fix for this bug now makes 'telinit u' block until the re-exec
operation has completed fully.

Technically, it is not possible to make 'telinit u' synchronous since
because D-Bus connections cannot be serialised and since the 'telinit u'
request is made via a D-Bus connection, when Upstart re-exec's, it has
to sever all D-Bus connections, including the 'telinit u' D-Bus
connection. As such, 'telinit u' now performs the following operations:

- - Requests synchronously that Upstart re-exec itself.
- - Polls Upstart forever by attempting to connect to PID 1 and if
- that operation fails, waiting for a period, the retrying.
+ - Requests synchronously that Upstart re-exec itself.
+ - Polls Upstart forever by attempting to connect to PID 1 and if
+ that operation fails, waiting for a period, the retrying.

The code is well commented to explain this less-than-ideal but
nonetheless essential poll operation:

- http://bazaar.launchpad.net/~upstart-
+ http://bazaar.launchpad.net/~upstart-
devel/upstart/trunk/view/head:/util/telinit.c#L171

== bug 1338637 ==

This was a simple bug fix.

-
= FIX AVAILABILITY =

TBD.
-

= IMPACT =

On a high uptime server, the more times that 'telinit u' is called (as
the result of normal apt-get updates to any of the packages listed under
bug 901038 above), the slower the operation will take to complete, and
thus the likelihood of bug 901038 being seen will increase.
-

= JUSTIFICATION =

System updates need to just work. However, as outlined above, the
longer a systems uptime, the more likely it is to be affected by this
issue which increases the likelihood of a system update failure.

This issue needs to be fixed as soon as possible to minimise issues for
trusty users and administrators, particularly before any potential
upgrade to Utopic.
-

= TEST CASE =

== To demonstrate bug 1338637 ==

$ sudo telinit u
$ sudo ls -l /proc/1/fd|grep inotify|wc -l

The correct output from the above 2 commands should be simply 2.

However, on trusty systems, if the commands above are run after a fresh
boot, the value will in all likelihood be 4. Also, every subsequent
'telinit u' will increase the number displayed by 2.

== To demonstrate bug 901038 ==

for i in $(seq 10); do telinit u; done

There should be no output from the command-line above, but on a trusty
system the chances are that one or more lines will display like this:

$ for i in $(seq 5); do sudo telinit u;done
telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused

== To prove the overall problem has been fixed ==

1) Download the attached force-reexec.sh onto a trusty system.
2) Make executable:

-$ chmod 755 ./force-reexec.sh
+ $ chmod

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

The fix for bug 901038 is available upstream but is not yet in Utopic.

Since this is a fundamental system tool, we need to wait until this has
had testing in utopic prior to progressing this SRU.

Plan:

1) Get lp:~jamesodhunt/upstart/bug-1360208 reviewed and landed upstream 
(hopefully this week).
2) Release upstart 1.13.3 (including the fix for bug 901038).
3) Land upstart 1.13.3 in utopic.
4) Wait for a few days.
5) Cherry-pick to trusty to allow this SRU to progress.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/1338637

Title:
  continuous re-exec can result in a build-up of inotify fds [SRU]

Status in Upstart:
  Fix Released
Status in “upstart” package in Ubuntu:
  New
Status in “upstart” source package in Trusty:
  New

Bug description:
  = PROBLEM =

  The version of Upstart currently in trusty (1.12.1-0ubuntu4.2) suffers
  from a couple of problems which in combination could make upgrading
  difficult on systems with high uptimes.

  The 2 issues are:

  == bug 901038 ==

  The issue here is that telinit in trusty is not fully synchronous. This
  is not normally a problem. However if Upstart is re-exec'ed using
  'telinit u', as is done by the maintainer scripts for the following 
packages...

    - libc6
    - libdbus-1-3
    - libjson-c2
    - libnih1
    - libnih-dbus1
    - libselinux1
    - libsepol1
    - upstart

  ... and if that operation is slow (it is normally extremely fast),
  subsequent package upgrades (part of the same apt-get run) which *also*
  need to restart Upstart may fail since 'telinit u' is unable to connect
  to PID 1 as a result of Upstart still being in the process of
  re-exec'ing from the last call to 'telinit u'.

  == bug 1338637 ==

  This bug only really affects server systems which have high uptimes. If
  a re-exec is triggered via 'telinit u' as part of a package upgrade (see
  above), Upstart will consume 2 additional inotify watches. Although this
  doesn't affect the correct behaviour of Upstart, it does have two
  repercussions:

  a) It wastes inotify watches.
  b) It slows down an Upstart re-exec ('telinit u').

  Note that the slow-down for a vanilla Trusty server may not be
  detectable unless the value of /proc/sys/fs/inotify/max_user_instances
  has been raised above the default value of 128.

  = FIX DETAILS =

  == bug 901038 ==

  The fix for this bug now makes 'telinit u' block until the re-exec
  operation has completed fully.

  Technically, it is not possible to make 'telinit u' synchronous since
  because D-Bus connections cannot be serialised and since the 'telinit u'
  request is made via a D-Bus connection, when Upstart re-exec's, it has
  to sever all D-Bus connections, including the 'telinit u' D-Bus
  connection. As such, 'telinit u' now performs the following operations:

    - Requests synchronously that Upstart re-exec itself.
    - Polls Upstart forever by attempting to connect to PID 1 and if
  that operation fails, waiting for a period, the retrying.

  The code is well commented to explain this less-than-ideal but
  nonetheless essential poll operation:

    http://bazaar.launchpad.net/~upstart-
  devel/upstart/trunk/view/head:/util/telinit.c#L171

  == bug 1338637 ==

  This was a simple bug fix.

  = FIX AVAILABILITY =

  TBD.

  = IMPACT =

  On a high uptime server, the more times that 'telinit u' is called (as
  the result of normal apt-get updates to any of the packages listed under
  bug 901038 above), the slower the operation will take to complete, and
  thus the likelihood of bug 901038 being seen will increase.

  = JUSTIFICATION =

  System updates need to just work. However, as outlined above, the
  longer a systems uptime, the more likely it is to be affected by this
  issue which increases the likelihood of a system update failure.

  This issue needs to be fixed as soon as possible to minimise issues for
  trusty users and administrators, particularly before any potential
  upgrade to Utopic.

  = TEST CASE =

  == To demonstrate bug 1338637 ==

  $ sudo telinit u
  $ sudo ls -l /proc/1/fd|grep inotify|wc -l

  The correct output from the above 2 commands should be simply 2.

  However, on trusty systems, if the commands above are run after a fresh
  boot, the value will in all likelihood be 4. Also, every subsequent
  'telinit u' will increase the number displayed by 2.

  == To demonstrate bug 901038 ==

  for i in $(seq 10); do telinit u; done

  There should be no output from the command-line above, but on a trusty
  system the chances are that one or more lines will display like this:

  $ for i in $(seq 5); do sudo telinit u;done
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused

  == To prove the

[Touch-packages] [Bug 1368084] Re: phablet-shell: 72: [: /bin/bash:: unexpected operator, tries to read /root/.bash_profile

2014-09-18 Thread Oliver Grawert

fixed in the latest android-tools-adbd

** Changed in: phablet-tools (Ubuntu)
   Status: New = Invalid

** Changed in: android-tools (Ubuntu)
   Status: New = Fix Released

** Changed in: android-tools (Ubuntu)
   Importance: Undecided = High

** Changed in: android-tools (Ubuntu)
 Assignee: (unassigned) = Oliver Grawert (ogra)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to android-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1368084

Title:
  phablet-shell: 72: [: /bin/bash:: unexpected operator, tries to read
  /root/.bash_profile

Status in “android-tools” package in Ubuntu:
  Fix Released
Status in “phablet-tools” package in Ubuntu:
  Invalid

Bug description:
  Recent phablet-shell (r307) gives a lot of error messages:

  $ ~/ubuntu/phablet-tools/phablet-shell  
  /home/martin/ubuntu/phablet-tools/phablet-shell: 72: [: /bin/bash:: 
unexpected operator
  /bin/bash: /root/.bash_profile: Permission denied
  /home/martin/.ssh/known_hosts updated.
  Original contents retained as /home/martin/.ssh/known_hosts.old
  9 KB/s (395 bytes in 0.040s)
  /bin/bash: /root/.bash_profile: Permission denied
  /bin/bash: /root/.bash_profile: Permission denied
  /bin/bash: /root/.bash_profile: Permission denied

  The syntax error comes from

  ADBUID=$(adb shell id -u|tr -d '\n')
  if [ $ADBUID -eq 0 ]; then

  as the shell command includes all these errors about
  /root/.bash_profile:

  $ adb shell 'id -u'
  /bin/bash: /root/.bash_profile: Permission denied
  32011

  Supposedly the recent changes to adbd forgot to set a proper $HOME or
  something similar?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/android-tools/+bug/1368084/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

** Description changed:

  = PROBLEM =
  
  The version of Upstart currently in trusty (1.12.1-0ubuntu4.2) suffers
  from a couple of problems which in combination could make upgrading
  difficult on systems with high uptimes.
  
  The 2 issues are:
  
  == bug 901038 ==
  
  The issue here is that telinit in trusty is not fully synchronous. This
  is not normally a problem. However if Upstart is re-exec'ed using
  'telinit u', as is done by the maintainer scripts for the following 
packages...
  
    - libc6
    - libdbus-1-3
    - libjson-c2
    - libnih1
    - libnih-dbus1
    - libselinux1
    - libsepol1
    - upstart
  
  ... and if that operation is slow (it is normally extremely fast),
  subsequent package upgrades (part of the same apt-get run) which *also*
  need to restart Upstart may fail since 'telinit u' is unable to connect
  to PID 1 as a result of Upstart still being in the process of
  re-exec'ing from the last call to 'telinit u'.
  
  == bug 1338637 ==
  
  This bug only really affects server systems which have high uptimes. If
  a re-exec is triggered via 'telinit u' as part of a package upgrade (see
  above), Upstart will consume 2 additional inotify watches. Although this
  doesn't affect the correct behaviour of Upstart, it does have two
  repercussions:
  
  a) It wastes inotify watches.
  b) It slows down an Upstart re-exec ('telinit u').
  
  Note that the slow-down for a vanilla Trusty server may not be
  detectable unless the value of /proc/sys/fs/inotify/max_user_instances
  has been raised above the default value of 128.
  
  = FIX DETAILS =
  
  == bug 901038 ==
  
  The fix for this bug now makes 'telinit u' block until the re-exec
  operation has completed fully.
  
  Technically, it is not possible to make 'telinit u' synchronous since
  because D-Bus connections cannot be serialised and since the 'telinit u'
  request is made via a D-Bus connection, when Upstart re-exec's, it has
  to sever all D-Bus connections, including the 'telinit u' D-Bus
  connection. As such, 'telinit u' now performs the following operations:
  
    - Requests synchronously that Upstart re-exec itself.
    - Polls Upstart forever by attempting to connect to PID 1 and if
  that operation fails, waiting for a period, the retrying.
  
  The code is well commented to explain this less-than-ideal but
  nonetheless essential poll operation:
  
    http://bazaar.launchpad.net/~upstart-
  devel/upstart/trunk/view/head:/util/telinit.c#L171
  
  == bug 1338637 ==
  
  This was a simple bug fix.
  
  = FIX AVAILABILITY =
  
  TBD.
  
  = IMPACT =
  
  On a high uptime server, the more times that 'telinit u' is called (as
  the result of normal apt-get updates to any of the packages listed under
  bug 901038 above), the slower the operation will take to complete, and
  thus the likelihood of bug 901038 being seen will increase.
  
  = JUSTIFICATION =
  
  System updates need to just work. However, as outlined above, the
  longer a systems uptime, the more likely it is to be affected by this
  issue which increases the likelihood of a system update failure.
  
  This issue needs to be fixed as soon as possible to minimise issues for
  trusty users and administrators, particularly before any potential
  upgrade to Utopic.
  
  = TEST CASE =
  
  == To demonstrate bug 1338637 ==
  
  $ sudo telinit u
  $ sudo ls -l /proc/1/fd|grep inotify|wc -l
  
  The correct output from the above 2 commands should be simply 2.
  
  However, on trusty systems, if the commands above are run after a fresh
  boot, the value will in all likelihood be 4. Also, every subsequent
  'telinit u' will increase the number displayed by 2.
  
  == To demonstrate bug 901038 ==
  
  for i in $(seq 10); do telinit u; done
  
  There should be no output from the command-line above, but on a trusty
  system the chances are that one or more lines will display like this:
  
  $ for i in $(seq 5); do sudo telinit u;done
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  
  == To prove the overall problem has been fixed ==
  
  1) Download the attached force-reexec.sh onto a trusty system.
  2) Make executable:
  
     $ chmod 755 ./force-reexec.sh
  
  3) Run script as root, specifying a number of iterations (100) and
     saving output to file ./typescript.bad:
  
     $ script -c 'sudo ./force-reexec.sh 100' typescript.bad
  
  4) Upgrade to latest version of Upstart that fixes the 2 bugs.
  
  5) Reboot.
  
  6) Re-run the script
  
     $ script -c 'sudo ./force-reexec.sh 100' typescript.good
  
  7) Check the results:
  
     - file typescript.bad will show an increasing number of watches
   and *MAY* show a slowly increasing restart time (depending on
   the value of /proc/sys/fs/inotify/max_user_instances (see above)).
  
    - file

[Touch-packages] [Bug 1370386] Re: libmirclient7 hang on client startup

2014-09-18 Thread Daniel van Vugt

OK, thanks. Since we're not certain what the fix was (if any) then
Incomplete is the best state. If the problem doesn't reoccur in 60 days,
the bug will expire and close automatically.

** Changed in: mir
   Status: New = Incomplete

** Changed in: mir (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mir in Ubuntu.
https://bugs.launchpad.net/bugs/1370386

Title:
  libmirclient7 hang on client startup

Status in Mir:
  Incomplete
Status in “mir” package in Ubuntu:
  Incomplete

Bug description:
  When starting up a mir 7 client on vmware (Ubuntu 14.04) it hangs in
  the following location:

  at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
  185   ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: No such 
file or directory.
  (gdb) bt
  #0  pthread_cond_wait@@GLIBC_2.3.2 ()
  at ../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:185
  #1  0x7679266c in 
std::condition_variable::wait(std::unique_lockstd::mutex) ()
 from /usr/lib/x86_64-linux-gnu/libstdc++.so.6
  #2  0x77b92e9b in MirWaitHandle::wait_for_all() ()
 from /usr/lib/x86_64-linux-gnu/libmirclient.so.7
  #3  0x00401027 in demo_client ()
  #4  0x00400e97 in main ()

  (This is mir_demo_client_basic from the mir_demos package)

  The mir_demo_standalone_* applications seem to work fine, and the
  mir_demo_server_* applications seem to be running nicely with a
  visible mouse cursor.

  This also happens with XMir, which is the most annoying part.

  It appears to be a regression, since I'm sure I had this running on an
  earlier update snapshot of Ubuntu 14.04

  Thanks,
  Thomas

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1370386/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371047] Re: Apps start but their splash screen is shown constantly in the right edge switcher

Talked to mzanetti, he will be looking into this.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371047

Title:
  Apps start but their splash screen is shown constantly in the right
  edge switcher

Status in “unity8” package in Ubuntu:
  New

Bug description:
  image 245

  1. Make sure none of the apps are running
  2. start a new app from the launcher

  What happens:
  The app starts but its splash screen stays in the right edge switcher 
constantly. So basically we are getting two entries of each app in the 
switcher. See attached screenshot.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity8 8.00+14.10.20140910.1-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  Date: Thu Sep 18 15:25:34 2014
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  SourcePackage: unity8
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371047/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371048] [NEW] phone believed to enforce undocumented password policy

2014-09-18 Thread John McAleely

Public bug reported:

Per conversation on IRC with ogra.

The phone will reject passwords which match the username.

Fine and dandy, but isn't password security the responsibilty of other
entities and code. Rejecting just this insecure password, hard-coded,
seems a bit odd.

** Affects: android-tools (Ubuntu)
 Importance: High
 Assignee: Oliver Grawert (ogra)
 Status: Confirmed

** Changed in: android-tools (Ubuntu)
 Assignee: (unassigned) = Oliver Grawert (ogra)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to android-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1371048

Title:
  phone believed to enforce undocumented password policy

Status in “android-tools” package in Ubuntu:
  Confirmed

Bug description:
  Per conversation on IRC with ogra.

  The phone will reject passwords which match the username.

  Fine and dandy, but isn't password security the responsibilty of other
  entities and code. Rejecting just this insecure password, hard-coded,
  seems a bit odd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/android-tools/+bug/1371048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371047] [NEW] Apps start but their splash screen is shown constantly in the right edge switcher

Public bug reported:

image 245

1. Make sure none of the apps are running
2. start a new app from the launcher

What happens:
The app starts but its splash screen stays in the right edge switcher 
constantly. So basically we are getting two entries of each app in the 
switcher. See attached screenshot.

ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: unity8 8.00+14.10.20140910.1-0ubuntu1
Uname: Linux 3.4.0-5-mako armv7l
ApportVersion: 2.14.7-0ubuntu2
Architecture: armhf
Date: Thu Sep 18 15:25:34 2014
InstallationDate: Installed on 2014-09-18 (0 days ago)
InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
SourcePackage: unity8
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: unity8 (Ubuntu)
 Importance: High
 Assignee: Michael Zanetti (mzanetti)
 Status: New


** Tags: apport-bug armhf qa-touch utopic

** Attachment added: switcher.png
   
https://bugs.launchpad.net/bugs/1371047/+attachment/4207330/+files/switcher.png

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) = Michael Zanetti (mzanetti)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371047

Title:
  Apps start but their splash screen is shown constantly in the right
  edge switcher

Status in “unity8” package in Ubuntu:
  New

Bug description:
  image 245

  1. Make sure none of the apps are running
  2. start a new app from the launcher

  What happens:
  The app starts but its splash screen stays in the right edge switcher 
constantly. So basically we are getting two entries of each app in the 
switcher. See attached screenshot.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity8 8.00+14.10.20140910.1-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  Date: Thu Sep 18 15:25:34 2014
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  SourcePackage: unity8
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371047/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1368670] Re: [Dash] Simplify 'Manage Dash' area

2014-09-18 Thread Albert Astals Cid

** Changed in: unity8 (Ubuntu)
   Status: Triaged = In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1368670

Title:
  [Dash] Simplify 'Manage Dash' area

Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  In Progress

Bug description:
  UX Testing Report: Replace the current bottom edge screens with the
  simpler Complete list of Scopes design.

  New Manage Dash design can be found here:
  
https://sites.google.com/a/canonical.com/unity-8-dash-rtm-1/scope-structure-navigation/my-feeds-structure


  Additional UX Testing Report findings addressed by the redesign:

  
  Poor discoverability and comprehension of scopes - The use of labelings that 
do not include the word 'scope'/'scopes'

  Lack of visual distinctions between apps and scopes in the 'manage
  dash' screen

  Undefined relationship between apps and scopes

  Search function does not help the discovery of scopes

  No dedicated place for adding scopes on the dash

  Poor memorability in locating the' manage dash' screen again

  The impact of making a scope favourite is unclear

  Lack of indication of the nature of the scopes under 'all' tab on
  'manage dash'

  Navigation between manage dash and apps scope was difficult

  Expect to see categorises instead of content

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1368670/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1244176] Re: Server 13.10 Install Fails with USB Keyboard (Appears to Hang)

2014-09-18 Thread Amedeo

I also had the same issue installing Ubuntu 14.10 mini.iso (07 september
2014). My Microsoft Wireless Keyboard 800 freezes at Select a
language.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1244176

Title:
  Server 13.10 Install Fails with USB Keyboard (Appears to Hang)

Status in “initramfs-tools” package in Ubuntu:
  Invalid
Status in “linux” package in Ubuntu:
  Fix Released
Status in “initramfs-tools” source package in Saucy:
  Invalid
Status in “linux” source package in Saucy:
  Fix Released
Status in “initramfs-tools” source package in Trusty:
  Invalid
Status in “linux” source package in Trusty:
  Fix Released

Bug description:
  A fresh install of Server 13.10 on old hardware fails when a USB
  keyboard is present. The installation succeeds when a PS/2 keyboard is
  installed.

  The installation appears to hang at the third screen, which is Select
  Language. The screen does not respond to keyboard or mouse events.

  The issue was experienced independently on HP/Compag  dc5850 with
  Athlon X2 2.3 GHz dual core, 4GB RAM; and DELL Optiplex 755. See
  Server 13.10 Install Hangs,
  http://askubuntu.com/questions/364945/server-13-10-install-
  hangs/364949.

  The issue was not present on Server 12.04.3 LTS or 13.04.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1244176/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371048] Re: phone believed to enforce undocumented password policy

2014-09-18 Thread Oliver Grawert

there is no hard coding it checks if the username and password are
identical ... in teh beginning of working on developer mode this helped
to force people to update their password and make sure dev-mode was
properly enabled (we used to set the password to match teh username in
former installs)

indeed this code needs to go ... password secuity needs to be managed
while the password is being set anyway

** Changed in: android-tools (Ubuntu)
   Status: New = Confirmed

** Changed in: android-tools (Ubuntu)
   Importance: Undecided = High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to android-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1371048

Title:
  phone believed to enforce undocumented password policy

Status in “android-tools” package in Ubuntu:
  Confirmed

Bug description:
  Per conversation on IRC with ogra.

  The phone will reject passwords which match the username.

  Fine and dandy, but isn't password security the responsibilty of other
  entities and code. Rejecting just this insecure password, hard-coded,
  seems a bit odd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/android-tools/+bug/1371048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

** Branch linked: lp:~jamesodhunt/ubuntu/trusty/upstart/SRU-
bugs-901038+1338637

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/1338637

Title:
  continuous re-exec can result in a build-up of inotify fds [SRU]

Status in Upstart:
  Fix Released
Status in “upstart” package in Ubuntu:
  New
Status in “upstart” source package in Trusty:
  New

Bug description:
  = PROBLEM =

  The version of Upstart currently in trusty (1.12.1-0ubuntu4.2) suffers
  from a couple of problems which in combination could make upgrading
  difficult on systems with high uptimes.

  The 2 issues are:

  == bug 901038 ==

  The issue here is that telinit in trusty is not fully synchronous. This
  is not normally a problem. However if Upstart is re-exec'ed using
  'telinit u', as is done by the maintainer scripts for the following 
packages...

    - libc6
    - libdbus-1-3
    - libjson-c2
    - libnih1
    - libnih-dbus1
    - libselinux1
    - libsepol1
    - upstart

  ... and if that operation is slow (it is normally extremely fast),
  subsequent package upgrades (part of the same apt-get run) which *also*
  need to restart Upstart may fail since 'telinit u' is unable to connect
  to PID 1 as a result of Upstart still being in the process of
  re-exec'ing from the last call to 'telinit u'.

  == bug 1338637 ==

  This bug only really affects server systems which have high uptimes. If
  a re-exec is triggered via 'telinit u' as part of a package upgrade (see
  above), Upstart will consume 2 additional inotify watches. Although this
  doesn't affect the correct behaviour of Upstart, it does have two
  repercussions:

  a) It wastes inotify watches.
  b) It slows down an Upstart re-exec ('telinit u').

  Note that the slow-down for a vanilla Trusty server may not be
  detectable unless the value of /proc/sys/fs/inotify/max_user_instances
  has been raised above the default value of 128.

  = FIX DETAILS =

  == bug 901038 ==

  The fix for this bug now makes 'telinit u' block until the re-exec
  operation has completed fully.

  Technically, it is not possible to make 'telinit u' synchronous since
  because D-Bus connections cannot be serialised and since the 'telinit u'
  request is made via a D-Bus connection, when Upstart re-exec's, it has
  to sever all D-Bus connections, including the 'telinit u' D-Bus
  connection. As such, 'telinit u' now performs the following operations:

    - Requests synchronously that Upstart re-exec itself.
    - Polls Upstart forever by attempting to connect to PID 1 and if
  that operation fails, waiting for a period, the retrying.

  The code is well commented to explain this less-than-ideal but
  nonetheless essential poll operation:

    http://bazaar.launchpad.net/~upstart-
  devel/upstart/trunk/view/head:/util/telinit.c#L171

  == bug 1338637 ==

  This was a simple bug fix.

  = FIX AVAILABILITY =

  TBD.

  = IMPACT =

  On a high uptime server, the more times that 'telinit u' is called (as
  the result of normal apt-get updates to any of the packages listed under
  bug 901038 above), the slower the operation will take to complete, and
  thus the likelihood of bug 901038 being seen will increase.

  = JUSTIFICATION =

  System updates need to just work. However, as outlined above, the
  longer a systems uptime, the more likely it is to be affected by this
  issue which increases the likelihood of a system update failure.

  This issue needs to be fixed as soon as possible to minimise issues for
  trusty users and administrators, particularly before any potential
  upgrade to Utopic.

  = TEST CASE =

  == To demonstrate bug 1338637 ==

  $ sudo telinit u
  $ sudo ls -l /proc/1/fd|grep inotify|wc -l

  The correct output from the above 2 commands should be simply 2.

  However, on trusty systems, if the commands above are run after a fresh
  boot, the value will in all likelihood be 4. Also, every subsequent
  'telinit u' will increase the number displayed by 2.

  == To demonstrate bug 901038 ==

  for i in $(seq 10); do telinit u; done

  There should be no output from the command-line above, but on a trusty
  system the chances are that one or more lines will display like this:

  $ for i in $(seq 5); do sudo telinit u;done
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused

  == To prove the overall problem has been fixed ==

  1) Download the attached force-reexec.sh onto a trusty system.
  2) Make executable:

     $ chmod 755 ./force-reexec.sh

  3) Run script as root, specifying a number of iterations (100) and
     saving output to file ./typescript.bad:

     $ script -c 'sudo ./force-reexec.sh 100' typescript.bad

  4) Upgrade to latest version of Upstart that fixes the 2

[Touch-packages] [Bug 901038] Re: packages fail to install: Failed to connect to socket /com/ubuntu/upstart: Connection refused

** Branch linked: lp:~jamesodhunt/ubuntu/trusty/upstart/SRU-
bugs-901038+1338637

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/901038

Title:
  packages fail to install: Failed to connect to socket
  /com/ubuntu/upstart: Connection refused

Status in “upstart” package in Ubuntu:
  In Progress
Status in “upstart” source package in Trusty:
  New

Bug description:
  This is a second install of Xubuntu 12.04-testing.

  Apport seems to think this is not reported.  Reported it on my other
  install.

  Do not have time or desire to hunt up the other bug, you may have
  deleted it for all I know.

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: cups (not installed)
  ProcVersionSignature: Ubuntu 3.2.0-3.8-generic 3.2.0-rc4
  Uname: Linux 3.2.0-3-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 1.90-0ubuntu1
  Architecture: amd64
  Date: Fri Dec  2 20:01:35 2011
  Df:
   Filesystem 1K-blocksUsed Available Use% Mounted on
   /dev/sda9   10304824 5614180   4167176  58% /
   udev 1536476   0   1536476   0% /dev
  DuplicateSignature:
   Setting up rsyslog (5.8.6-1ubuntu2) ...
   start: Unable to connect to Upstart: Failed to connect to socket 
/com/ubuntu/upstart: Connection refused
   invoke-rc.d: initscript rsyslog, action restart failed.
   dpkg: error processing rsyslog (--configure):
subprocess installed post-installation script returned error exit status 1
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  InstallationMedia: Xubuntu 11.10 Oneiric Ocelot - Beta amd64 (20110921.3)
  SourcePackage: cups
  Title: package cups (not installed) failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/901038/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1370146] Re: Adjust header behaviour UI in multi select mode

2014-09-18 Thread Giorgio Venturi

I reviewed Nik's clock implementation and it works great! Well done

** Changed in: ubuntu-ux
   Status: Fix Committed = Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1370146

Title:
  Adjust header behaviour  UI in multi select mode

Status in Address Book App:
  New
Status in Dialer app for Ubuntu Touch:
  New
Status in Messaging App:
  New
Status in Clock application for Ubuntu devices:
  In Progress
Status in Ubuntu UI Toolkit:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Released
Status in “address-book-app” package in Ubuntu:
  New
Status in “dialer-app” package in Ubuntu:
  New
Status in “messaging-app” package in Ubuntu:
  New
Status in “ubuntu-ui-toolkit” package in Ubuntu:
  New

Bug description:
  Steps to reproduce:

  1. Open Messaging app (or Address Book app, Phone app), make sure you have a 
list in your messages view
  2. Long press on any of the list items

  Actual Result:
  3. Header is changing and shows an X button on the left hand side and two 
action buttons on the right hand side. Selection checkboxes appear from the 
left hand side.

  Expected result - desired solution:
  - The header should display a BACK button instead of the X on the left hand 
side, same as we have in all other headers
  - Remove the change in the background colour when a list item is selected, 
change in the colour of the checkbox is enough
  - Add labels for all visible actions in this mode in the header, including 
BACK for the back button
  - Tapping on the BACK in this mode, cancels the multi-select mode and does 
NOT navigate back to the previous view
  - There is no title in this header

  Please see attached wireframe for reference. This change applies
  across all apps which use a multi select in their list views.

To manage notifications about this bug go to:
https://bugs.launchpad.net/address-book-app/+bug/1370146/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1338637] Re: continuous re-exec can result in a build-up of inotify fds [SRU]

A test branch is available here: lp:~jamesodhunt/ubuntu/trusty/upstart
/SRU-bugs-901038+1338637

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to upstart in Ubuntu.
https://bugs.launchpad.net/bugs/1338637

Title:
  continuous re-exec can result in a build-up of inotify fds [SRU]

Status in Upstart:
  Fix Released
Status in “upstart” package in Ubuntu:
  New
Status in “upstart” source package in Trusty:
  New

Bug description:
  = PROBLEM =

  The version of Upstart currently in trusty (1.12.1-0ubuntu4.2) suffers
  from a couple of problems which in combination could make upgrading
  difficult on systems with high uptimes.

  The 2 issues are:

  == bug 901038 ==

  The issue here is that telinit in trusty is not fully synchronous. This
  is not normally a problem. However if Upstart is re-exec'ed using
  'telinit u', as is done by the maintainer scripts for the following 
packages...

    - libc6
    - libdbus-1-3
    - libjson-c2
    - libnih1
    - libnih-dbus1
    - libselinux1
    - libsepol1
    - upstart

  ... and if that operation is slow (it is normally extremely fast),
  subsequent package upgrades (part of the same apt-get run) which *also*
  need to restart Upstart may fail since 'telinit u' is unable to connect
  to PID 1 as a result of Upstart still being in the process of
  re-exec'ing from the last call to 'telinit u'.

  == bug 1338637 ==

  This bug only really affects server systems which have high uptimes. If
  a re-exec is triggered via 'telinit u' as part of a package upgrade (see
  above), Upstart will consume 2 additional inotify watches. Although this
  doesn't affect the correct behaviour of Upstart, it does have two
  repercussions:

  a) It wastes inotify watches.
  b) It slows down an Upstart re-exec ('telinit u').

  Note that the slow-down for a vanilla Trusty server may not be
  detectable unless the value of /proc/sys/fs/inotify/max_user_instances
  has been raised above the default value of 128.

  = FIX DETAILS =

  == bug 901038 ==

  The fix for this bug now makes 'telinit u' block until the re-exec
  operation has completed fully.

  Technically, it is not possible to make 'telinit u' synchronous since
  because D-Bus connections cannot be serialised and since the 'telinit u'
  request is made via a D-Bus connection, when Upstart re-exec's, it has
  to sever all D-Bus connections, including the 'telinit u' D-Bus
  connection. As such, 'telinit u' now performs the following operations:

    - Requests synchronously that Upstart re-exec itself.
    - Polls Upstart forever by attempting to connect to PID 1 and if
  that operation fails, waiting for a period, the retrying.

  The code is well commented to explain this less-than-ideal but
  nonetheless essential poll operation:

    http://bazaar.launchpad.net/~upstart-
  devel/upstart/trunk/view/head:/util/telinit.c#L171

  == bug 1338637 ==

  This was a simple bug fix.

  = FIX AVAILABILITY =

  TBD.

  = IMPACT =

  On a high uptime server, the more times that 'telinit u' is called (as
  the result of normal apt-get updates to any of the packages listed under
  bug 901038 above), the slower the operation will take to complete, and
  thus the likelihood of bug 901038 being seen will increase.

  = JUSTIFICATION =

  System updates need to just work. However, as outlined above, the
  longer a systems uptime, the more likely it is to be affected by this
  issue which increases the likelihood of a system update failure.

  This issue needs to be fixed as soon as possible to minimise issues for
  trusty users and administrators, particularly before any potential
  upgrade to Utopic.

  = TEST CASE =

  == To demonstrate bug 1338637 ==

  $ sudo telinit u
  $ sudo ls -l /proc/1/fd|grep inotify|wc -l

  The correct output from the above 2 commands should be simply 2.

  However, on trusty systems, if the commands above are run after a fresh
  boot, the value will in all likelihood be 4. Also, every subsequent
  'telinit u' will increase the number displayed by 2.

  == To demonstrate bug 901038 ==

  for i in $(seq 10); do telinit u; done

  There should be no output from the command-line above, but on a trusty
  system the chances are that one or more lines will display like this:

  $ for i in $(seq 5); do sudo telinit u;done
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused
  telinit: Failed to connect to socket /com/ubuntu/upstart: Connection refused

  == To prove the overall problem has been fixed ==

  1) Download the attached force-reexec.sh onto a trusty system.
  2) Make executable:

     $ chmod 755 ./force-reexec.sh

  3) Run script as root, specifying a number of iterations (100) and
     saving output to file ./typescript.bad:

     $ script -c 'sudo ./force-reexec.sh 100' typescript.bad

  4) Upgrade to latest version of Upstart

[Touch-packages] [Bug 1371058] [NEW] Latest apt returns Hash Sum mismatch for file: URI:s

2014-09-18 Thread Björn Torkelsson

Public bug reported:

When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
I get Hash Sum mismatch when using file: URI:s.

First time running apt-get update after cleaning /var/lib/dpkg/lists/
and /var/lib/dpkg/lists/partial it works. However the second time I get:

root@crepes:/etc/apt# apt-get update
Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
Get:1 file: lucid-security Release.gpg [198B]  
Get:2 file: lucid-security Release [57,3kB] 
  
Hit http://security.ubuntu.com lucid-security Release.gpg   
Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe Translation-en_DK
Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
Hit http://security.ubuntu.com lucid-security Release
Hit http://security.ubuntu.com lucid-security/main Packages
Hit http://security.ubuntu.com lucid-security/restricted Packages
Hit http://security.ubuntu.com lucid-security/universe Packages
Hit http://security.ubuntu.com lucid-security/multiverse Packages
W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

E: Some index files failed to download, they have been ignored, or old
ones used instead.


Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

Reverting back to 0.7.25.3ubuntu9.15 it works.

And, of course, it works if only using http: URI:s.

Looks like a regression in 0.7.25.3ubuntu9.16

** Affects: apt (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Latest apt returns Hash Sum mismatch for file: URI:s

Status in “apt” package in Ubuntu:
  New

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http:

[Touch-packages] [Bug 1267059] Re: Unattended-Upgrade::Remove-Unused-Dependencies does not work

2014-09-18 Thread Lars Heide

Actually I just saw that it is semi fixed in 14.04 in the way that

now_auto_removable-pkgs_auto_removable

now reads

now_auto_removable - pkgs_auto_removable

which is also wrong, as

now_auto_removable = set([pkg.name for pkg in cache
  if pkg.is_auto_removable])
and

pkgs_auto_removable = set([pkg.name for pkg in cache
   if pkg.is_auto_removable])

are apparently the same, therefore substracting them from each other is
always empty.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unattended-upgrades in
Ubuntu.
https://bugs.launchpad.net/bugs/1267059

Title:
  Unattended-Upgrade::Remove-Unused-Dependencies does not work

Status in “unattended-upgrades” package in Ubuntu:
  Triaged

Bug description:
  I have a system that runs unattended-upgrades just fine. Now i want to
  automate removal of old kernels and kernel header packages that are
  accumulating otherwise. So i set 'Unattended-Upgrade::Remove-Unused-
  Dependencies true;'. But it doesn't work.

  
  Details: Lots of stuff pending autoremoval:

  $ apt-get --assume-no autoremove 
  Reading package lists... Done
  Building dependency tree   
  Reading state information... Done
  The following packages will be REMOVED
linux-headers-3.2.0-38 linux-headers-3.2.0-38-generic 
linux-headers-3.2.0-39 linux-headers-3.2.0-39-generic linux-headers-3.2.0-40 
linux-headers-3.2.0-40-generic linux-headers-3.2.0-41 
linux-headers-3.2.0-41-generic linux-headers-3.2.0-43 
linux-headers-3.2.0-43-generic linux-headers-3.2.0-44 
linux-headers-3.2.0-44-generic linux-headers-3.2.0-45 
linux-headers-3.2.0-45-generic linux-headers-3.2.0-48 
linux-headers-3.2.0-48-generic linux-headers-3.2.0-51 
linux-headers-3.2.0-51-generic linux-headers-3.2.0-52 
linux-headers-3.2.0-52-generic linux-headers-3.2.0-53 
linux-headers-3.2.0-53-generic linux-headers-3.2.0-54 
linux-headers-3.2.0-54-generic linux-headers-3.2.0-55 
linux-headers-3.2.0-55-generic linux-headers-3.2.0-56 
linux-headers-3.2.0-56-generic linux-image-3.2.0-39-generic 
linux-image-3.2.0-40-generic linux-image-3.2.0-41-generic 
linux-image-3.2.0-43-generic linux-image-3.2.0-44-generic 
linux-image-3.2.0-45-generic linux-image-3.2.0-48-generic 
linux-image-3.2.0-51-generic linux-image-3.2.0-52-generic 
linux-image-3.2.0-53-generic linux-image-3.2.0-54-generic 
linux-image-3.2.0-55-generic linux-image-3.2.0-56-generic
  0 upgraded, 0 newly installed, 41 to remove and 13 not upgraded.
  After this operation, 2,893 MB disk space will be freed.
  Do you want to continue [Y/n]? N
  Abort.

  Note that the majority of these packages have been installed by
  unattended-upgrades from precise-security.

  According to the comments within/etc/apt/apt.conf.d/50unattended-
  upgrades, this should automate autoremoval:

// Do automatic removal of new unused dependencies after the upgrade
// (equivalent to apt-get autoremove)
Unattended-Upgrade::Remove-Unused-Dependencies true;

  but nothing happens (note the line Packages that are auto removed: ''
  :

  $ unattended-upgrades --debug --dry-run
  Initial blacklisted packages: 
  Starting unattended upgrades script
  Allowed origins are: ['o=Ubuntu,a=precise-security']
  adjusting candidate version: 'Version: package:'accountsservice' 
version:'0.6.15-2ubuntu9.6.1''
  adjusting candidate version: 'Version: package:'libaccountsservice0' 
version:'0.6.15-2ubuntu9.6.1''
  adjusting candidate version: 'Version: package:'libdrm-intel1' 
version:'2.4.43-0ubuntu0.0.3''
  adjusting candidate version: 'Version: package:'libdrm-nouveau1a' 
version:'2.4.43-0ubuntu0.0.3''
  adjusting candidate version: 'Version: package:'libdrm-radeon1' 
version:'2.4.43-0ubuntu0.0.3''
  adjusting candidate version: 'Version: package:'libdrm2' 
version:'2.4.43-0ubuntu0.0.3''
  Checking: bc ([Origin component:'main' archive:'precise-updates' 
origin:'Ubuntu' label:'Ubuntu' site:'gb.archive.ubuntu.com' isTrusted:True])
  Checking: grub-common ([Origin component:'main' archive:'precise-updates' 
origin:'Ubuntu' label:'Ubuntu' site:'gb.archive.ubuntu.com' isTrusted:True])
  Checking: grub-pc ([Origin component:'main' archive:'precise-updates' 
origin:'Ubuntu' label:'Ubuntu' site:'gb.archive.ubuntu.com' isTrusted:True])
  Checking: grub-pc-bin ([Origin component:'main' archive:'precise-updates' 
origin:'Ubuntu' label:'Ubuntu' site:'gb.archive.ubuntu.com' isTrusted:True])
  Checking: grub2-common ([Origin component:'main' archive:'precise-updates' 
origin:'Ubuntu' label:'Ubuntu' site:'gb.archive.ubuntu.com' isTrusted:True])
  Checking: iproute ([Origin component:'main' archive:'precise-updates' 
origin:'Ubuntu' label:'Ubuntu' site:'gb.archive.ubuntu.com' isTrusted:True])
  Checking: landscape-common ([Origin component:'main' 
archive:'precise-updates' origin:'Ubuntu' label:'Ubuntu' 
site:'gb.archive.ubuntu.com' isTrusted:True])
  pkgs that look like they should

[Touch-packages] [Bug 1353379] Re: VoiceMail notification pretends there are 255 messages. It is not true there are only 2

2014-09-18 Thread Jussi Kangas

How to reproduce case: 
- Put your SIM card to Iphone Iphone 4. 
- Send voice mail message to the phone with SIM. 
- Move card to ubuntu-touch phone. 
- MessageCount in voicemail interface is 255. 

If I check number of voice mail messages waiting in elementary file EF_MWIS in 
SIM by Aspects Spy I see value b when after receiving the messages by 
Mako or old Nokia phone I see 0001b. I think this is some sort of bug with 
certain Qualcomm modems ( Originator reported that his reference phone was 
about year and half old Sony Xperia with unspecified model number ). 
Ofono is not doing the writing, modem is doing that, so we cannot change that.

As Alfonso correctly pointed out in our telco, Ofono not notifying the
client in run-time if voice mail message is stored directly to SIM is a
separate issue and fixing that would not fix reported problem.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-messages in
Ubuntu.
https://bugs.launchpad.net/bugs/1353379

Title:
  VoiceMail notification pretends there are 255 messages. It is not true
  there are only 2

Status in “indicator-messages” package in Ubuntu:
  Invalid
Status in “ofono” package in Ubuntu:
  Triaged

Bug description:
  Mako build #175

  The VoiceMail notification indicates there are 255 voice messages (cf
  screenshot)  on voice mail while there were only 2 new messages.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: indicator-messages 13.10.1+14.10.20140725-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.5-0ubuntu3
  Architecture: armhf
  Date: Wed Aug  6 11:57:43 2014
  InstallationDate: Installed on 2014-08-06 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140806-020204)
  SourcePackage: indicator-messages
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-messages/+bug/1353379/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371058] Re: Latest apt returns Hash Sum mismatch for file: URI:s

** Changed in: apt (Ubuntu)
   Importance: Undecided = Critical

** Changed in: apt (Ubuntu)
   Status: New = In Progress

** Changed in: apt (Ubuntu)
 Assignee: (unassigned) = Michael Vogt (mvo)

** Bug watch added: Debian Bug tracker #762079
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762079

** Also affects: apt (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762079
   Importance: Unknown
   Status: Unknown

** Also affects: apt (Ubuntu Utopic)
   Importance: Critical
 Assignee: Michael Vogt (mvo)
   Status: In Progress

** Also affects: apt (Ubuntu Trusty)
   Importance: Undecided
   Status: New

** Also affects: apt (Ubuntu Lucid)
   Importance: Undecided
   Status: New

** Also affects: apt (Ubuntu Precise)
   Importance: Undecided
   Status: New

** Summary changed:

- Latest apt returns Hash Sum mismatch for file: URI:s
+ Regression: Latest apt security update returns Hash Sum mismatch for file: 
URI:s

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Regression: Latest apt security update returns Hash Sum mismatch for
  file: URI:s

Status in “apt” package in Ubuntu:
  In Progress
Status in “apt” source package in Lucid:
  New
Status in “apt” source package in Precise:
  New
Status in “apt” source package in Trusty:
  New
Status in “apt” source package in Utopic:
  In Progress
Status in “apt” package in Debian:
  Unknown

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http: URI:s.

  Looks like a regression in 0.7.25.3ubuntu9.16

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371058] Re: Regression: Latest apt security update returns Hash Sum mismatch for file: URI:s

** Patch added: debdiff with the fix for lucid
   
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+attachment/4207352/+files/apt_0.7.25.3ubuntu9.17.debdiff

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Regression: Latest apt security update returns Hash Sum mismatch for
  file: URI:s

Status in “apt” package in Ubuntu:
  In Progress
Status in “apt” source package in Lucid:
  New
Status in “apt” source package in Precise:
  New
Status in “apt” source package in Trusty:
  New
Status in “apt” source package in Utopic:
  In Progress
Status in “apt” package in Debian:
  Unknown

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http: URI:s.

  Looks like a regression in 0.7.25.3ubuntu9.16

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371068] [NEW] Text is overflowing in Music menu

Public bug reported:

When a track is being played in the music-app, the music menu (the one
you pull down from the top) have overflowing text for the track details.
See attached screenshot.

ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: unity8 8.00+14.10.20140910.1-0ubuntu1
Uname: Linux 3.4.0-5-mako armv7l
ApportVersion: 2.14.7-0ubuntu2
Architecture: armhf
Date: Thu Sep 18 11:21:42 2014
InstallationDate: Installed on 2014-09-18 (0 days ago)
InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
SourcePackage: unity8
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: unity8 (Ubuntu)
 Importance: Low
 Status: New


** Tags: apport-bug armhf qa-touch utopic

** Attachment added: sound.png
   https://bugs.launchpad.net/bugs/1371068/+attachment/4207355/+files/sound.png

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371068

Title:
  Text is overflowing in Music menu

Status in “unity8” package in Ubuntu:
  New

Bug description:
  When a track is being played in the music-app, the music menu (the one
  you pull down from the top) have overflowing text for the track
  details. See attached screenshot.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity8 8.00+14.10.20140910.1-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  Date: Thu Sep 18 11:21:42 2014
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  SourcePackage: unity8
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371068/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371058] Re: Regression: Latest apt security update returns Hash Sum mismatch for file: URI:s

** Patch added: debdiff with the fix for trusty
   
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+attachment/4207371/+files/apt_1.0.1ubuntu2.4.debdiff

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Regression: Latest apt security update returns Hash Sum mismatch for
  file: URI:s

Status in “apt” package in Ubuntu:
  In Progress
Status in “apt” source package in Lucid:
  New
Status in “apt” source package in Precise:
  New
Status in “apt” source package in Trusty:
  New
Status in “apt” source package in Utopic:
  In Progress
Status in “apt” package in Debian:
  Unknown

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http: URI:s.

  Looks like a regression in 0.7.25.3ubuntu9.16

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1360102] Re: Unity device blacklist nonfunctional

2014-09-18 Thread Stephen M. Webb

** Changed in: unity
   Status: New = Triaged

** Changed in: unity
   Importance: Undecided = Medium

** Changed in: unity (Ubuntu)
   Status: New = Triaged

** Changed in: unity (Ubuntu)
   Importance: Undecided = Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/1360102

Title:
  Unity device blacklist nonfunctional

Status in Unity:
  Triaged
Status in “unity” package in Ubuntu:
  Triaged

Bug description:
  Installing 14.04 in a classroom dual-boot environment, Unity shows
  icons for the Windows partitions on the launcher, nonfunctional since
  they require root to mount. Such extraneous icons only serve to
  confuse the user.

  Googling, I found out about the com.canonical.Unity.Devices blacklist
  gsettings entry. I made a script that generates a schema such as this,
  for internal drives:

  [com.canonical.Unity.Devices]
  
blacklist=['F236BFEF36BFB349','1A98C11998C0F473','c251a534-47dd-4ecb-a62c-2ced6914ef4a','122357ec-3130-482f-b20e-a4c6522e0873']

  Here's the corresponding output of blkid -o list
  device   fs_type labelmount point  UUID
  
---
  /dev/sda1ntfsSystem   (not mounted)F236BFEF36BFB349
  /dev/sda2ntfsOSDisk   (not mounted)1A98C11998C0F473
  /dev/sda3swap swap   
c251a534-47dd-4ecb-a62c-2ced6914ef4a
  /dev/sda4ext4 /
122357ec-3130-482f-b20e-a4c6522e0873

  I put the file in /usr/share/glib-2.0/schemas and ran glib-compile-
  schemas on it. The entry _does_ show up in a user's session as
  evidenced by gsettings get and dconf-editor. dconf-editor also has a
  documentation line for the entry that indicates that this _should_
  indeed prevent the named drives from appearing.

  However, the icons persist in appearing, even on a clean home
  directory (no old user configuration to confuse anything).

  Can this be fixed, or is there another way to prevent Unity from
  showing local internal drives to users who have no means of accessing
  them? Disabling drive icons altogether would be suboptimal but perhaps
  workable too, though it'd be preferable that the removable drives
  would get icons. However, even removing unity://devices from
  com.canonical.Unity.Launcher favorites didn't prevent the icons from
  appearing (though the same edit did succeed in removing other
  application icons, so the setting itself went through properly).

  lsb_release -rd is:
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/1360102/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371058] Re: Regression: Latest apt security update returns Hash Sum mismatch for file: URI:s

Note that this also fixes a segfault due to a broken
FileFD::ReadOnlyGzip in this particular apt version.

** Patch added: debdiff with the fix for precise
   
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+attachment/4207383/+files/apt_0.8.16%7Eexp12ubuntu10.20.debdiff

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Regression: Latest apt security update returns Hash Sum mismatch for
  file: URI:s

Status in “apt” package in Ubuntu:
  In Progress
Status in “apt” source package in Lucid:
  New
Status in “apt” source package in Precise:
  New
Status in “apt” source package in Trusty:
  New
Status in “apt” source package in Utopic:
  In Progress
Status in “apt” package in Debian:
  Unknown

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http: URI:s.

  Looks like a regression in 0.7.25.3ubuntu9.16

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1363870] Re: launchpad.net bugs display in very thin column

2014-09-18 Thread Chris Coulson

Does Launchpad make use of window.screen.orientation?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1363870

Title:
  launchpad.net bugs display in very thin column

Status in Oxide Webview:
  New
Status in “webbrowser-app” package in Ubuntu:
  New

Bug description:
  Looking at a launchpad bug shows the body of the bug is a very thin
  (1/3 screen width?) column when held vertically.

  Rotating device to landscape mode shows a wider display, but only ~60%
  of the screen width is used.

To manage notifications about this bug go to:
https://bugs.launchpad.net/oxide/+bug/1363870/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 798377] Re: empathy is using lot of cpu when opening the window chat

2014-09-18 Thread Julien Olivier

I confirm the bug is back in Trusty when using gnome-online-accounts
with a GMail account. And, by the way, the same bug occurs with gnome-
contacts too. Both workd perfectly a few weeks ago, so something must
have broken very recently.

Tasks: 208 total,   4 running, 204 sleeping,   0 stopped,   0 zombie
%Cpu(s): 58,3 us,  5,8 sy,  0,4 ni, 33,4 id,  1,7 wa,  0,0 hi,  0,5 si,  0,0 st
KiB Mem:   3884928 total,  2837084 used,  1047844 free,80588 buffers
KiB Swap:  8388604 total,   181340 used,  8207264 free.  1221000 cached Mem

  PID USER  PR  NIVIRTRESSHR S  %CPU %MEM TIME+ COMMAND 
29634 julien20   0  487608 119572  63156 R  83,9  3,1   0:12.47 empathy-ch+ 
 4050 julien20   0  443464  59092  33484 R  73,5  1,5   1:27.30 empathy 
 3598 julien20   0  566412 138292  48756 S   5,2  3,6  14:19.65 gnome-shell 
29675 julien20   07084   2724   2328 R   5,2  0,1   0:00.02 top 
1 root  20   04424   2268   1268 S   0,0  0,1   0:06.56 init
2 root  20   0   0  0  0 S   0,0  0,0   0:00.01 kthreadd

** Changed in: empathy (Ubuntu)
   Status: Invalid = New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/798377

Title:
  empathy is using lot of cpu when opening the window chat

Status in Chat app, and Telepathy user interface:
  Fix Released
Status in “empathy” package in Ubuntu:
  New
Status in “gtk+3.0” package in Ubuntu:
  Fix Released

Bug description:
  Binary package hint: empathy

  1) Open empathy
  2) Connect to network
  3) open windows of chat
  4) full load empathy-chat

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: empathy 3.1.2.1-1ubuntu1
  Uname: Linux 3.0.0-0300rc3-generic x86_64
  Architecture: amd64
  Date: Thu Jun 16 14:39:06 2011
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Alpha amd64 (20110531.1)
  ProcEnviron:
   LANGUAGE=es_CL:es_ES:en
   LANG=es_CL.UTF-8
   SHELL=/bin/bash
  SourcePackage: empathy
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/empathy/+bug/798377/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1238979] Re: Scope result models are cleared on updates

2014-09-18 Thread Pawel Stolowski

** Branch linked: lp:~stolowski/unity-scopes-shell/delay-clear

** Branch linked: lp:~stolowski/unity-api/results-enabled-flag

** Changed in: unity-scopes-shell
   Status: Confirmed = In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1238979

Title:
  Scope result models are cleared on updates

Status in Ubuntu UX bugs:
  New
Status in Unity Media Scanner Scope:
  Invalid
Status in API for Unity scopes integration:
  Invalid
Status in QML plugin for Scopes:
  In Progress
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  The result models are cleared when updated, which causes abrupt
  changes in the dash. We need a better way for updating the models
  without clearing them :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1238979/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371047] Re: Apps start but their splash screen is shown constantly in the right edge switcher

2014-09-18 Thread Gerry Boland

** Changed in: unity8 (Ubuntu)
 Assignee: Michael Zanetti (mzanetti) = Gerry Boland (gerboland)

** Changed in: unity8 (Ubuntu)
   Status: New = In Progress

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371047

Title:
  Apps start but their splash screen is shown constantly in the right
  edge switcher

Status in “unity8” package in Ubuntu:
  In Progress

Bug description:
  image 245

  1. Make sure none of the apps are running
  2. start a new app from the launcher

  What happens:
  The app starts but its splash screen stays in the right edge switcher 
constantly. So basically we are getting two entries of each app in the 
switcher. See attached screenshot.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity8 8.00+14.10.20140910.1-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  Date: Thu Sep 18 15:25:34 2014
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  SourcePackage: unity8
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371047/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1238979] Re: Scope result models are cleared on updates

2014-09-18 Thread Andrea Cimitan

** Also affects: ubuntu-ux
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1238979

Title:
  Scope result models are cleared on updates

Status in Ubuntu UX bugs:
  New
Status in Unity Media Scanner Scope:
  Invalid
Status in API for Unity scopes integration:
  Invalid
Status in QML plugin for Scopes:
  In Progress
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  The result models are cleared when updated, which causes abrupt
  changes in the dash. We need a better way for updating the models
  without clearing them :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1238979/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1238979] Re: Scope result models are cleared on updates

2014-09-18 Thread Albert Astals Cid

** Branch linked: lp:~aacid/unity8/results-enabled-flag

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1238979

Title:
  Scope result models are cleared on updates

Status in Ubuntu UX bugs:
  New
Status in Unity Media Scanner Scope:
  Invalid
Status in API for Unity scopes integration:
  Invalid
Status in QML plugin for Scopes:
  In Progress
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  The result models are cleared when updated, which causes abrupt
  changes in the dash. We need a better way for updating the models
  without clearing them :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1238979/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371058] Re: Regression: Latest apt security update returns Hash Sum mismatch for file: URI:s

2014-09-18 Thread Bug Watch Updater

** Changed in: apt (Debian)
   Status: Unknown = New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Regression: Latest apt security update returns Hash Sum mismatch for
  file: URI:s

Status in “apt” package in Ubuntu:
  In Progress
Status in “apt” source package in Lucid:
  New
Status in “apt” source package in Precise:
  New
Status in “apt” source package in Trusty:
  New
Status in “apt” source package in Utopic:
  In Progress
Status in “apt” package in Debian:
  New

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http: URI:s.

  Looks like a regression in 0.7.25.3ubuntu9.16

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371047] Re: Apps start but their splash screen is shown constantly in the right edge switcher

** Branch linked: lp:~gerboland/qtmir/duplicate-open-apps

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371047

Title:
  Apps start but their splash screen is shown constantly in the right
  edge switcher

Status in “unity8” package in Ubuntu:
  In Progress

Bug description:
  image 245

  1. Make sure none of the apps are running
  2. start a new app from the launcher

  What happens:
  The app starts but its splash screen stays in the right edge switcher 
constantly. So basically we are getting two entries of each app in the 
switcher. See attached screenshot.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity8 8.00+14.10.20140910.1-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  Date: Thu Sep 18 15:25:34 2014
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  SourcePackage: unity8
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371047/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1328513] Re: Preview header title truncated

2014-09-18 Thread Ying-Chun Liu

I tried to chat with Jmulholland yesterday. Trying to figure out what Mike 
means.
I got this link
https://drive.google.com/a/canonical.com/folderview?id=0B8T-xKCA6bikX3M1NllLdjhZYkUusp=drive_web
But also didn't find anything useful there.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1328513

Title:
  Preview header title truncated

Status in The Savilerow project:
  New
Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  When developing a news scope. The title in the grid card fits the
  news headline, but in the preview (the same text) the title gets
  truncated.

  This looks very strange and makes reading news hard tbh. Shouldnt we
  have a common behaviour (see attached files)

To manage notifications about this bug go to:
https://bugs.launchpad.net/savilerow/+bug/1328513/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371028] Re: YouTube scope depends on pending scopes release

2014-09-18 Thread Pete Woods

To clarify, the unity-scopes-api release already made it into utopic,
but has *not* made it into 14.09.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-api in
Ubuntu.
https://bugs.launchpad.net/bugs/1371028

Title:
  YouTube scope depends on pending scopes release

Status in QML plugin for Scopes:
  Invalid
Status in “unity-scopes-api” package in Ubuntu:
  Fix Committed

Bug description:
  - this only happens since r47 in krillin

  Reproduction:
  - favourite the youtube scope
  - make sure it works
  - reboot the phone

  Outcome:
  youtube scope is not populated

  the following log appears in /home/phablet/.cache/upstart/scope-registry.log
  http://paste.ubuntu.com/8371069/

  Same problem happens with the my pictures scope

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity-scopes-shell/+bug/1371028/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1368296] Re: [phone-app] - remove 2 step functionality in the bottom edge

** Branch linked: lp:~boiko/dialer-
app/disable_progressive_bottomedge_swipe

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1368296

Title:
  [phone-app] - remove 2 step functionality in the bottom edge

Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “dialer-app” package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:

  1. open dialer app - make sure you made/accepted/missed some calls
  2. carry out a slow swipe from the bottom of the screen to access your recent 
calls
  3. list items become visible and are selected as you progress swiping up, 
three list items overall
  4. after passing the third item, the actual list of recent calls blends in

  Desired resolution:
  Remove the first step (first three list items) of the swipe. User should be 
able to swipe in one go and access the full list of recent calls. Please see 
messaging and address book apps for reference.

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1368296/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358197] Re: Power off dialog box no longer shows restart

2014-09-18 Thread Ying-Chun Liu

** Branch linked: lp:~paulliu/unity8/readd_restart_20140915

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1358197

Title:
  Power off dialog box no longer shows restart

Status in Ubuntu UX bugs:
  Fix Committed
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  In the last promoted image, r179, the power off dialog displays three
  options:

  * Power off
  * Restart
  * Cancel

  In r197, the power off dialog no longer allows the user to restart the
  phone.

  Restart should be added back to the power off dialog box.

  Note: Not sure why this change was made, it was not a design request

  ---
  Desired resolution:

  - revert this change to add the restart option back to the power off
  dialogue

  - Note that when the phone is more stable we will eventually want to
  remove this option, however for now it should stay.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1358197/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1238979] Re: Scope result models are cleared on updates

2014-09-18 Thread Andrea Cimitan

We need design guidance on that, subscribed them.

In my opinion, darkening the results and blocking the dash is not the
best way to solve our problem.

The problem is: *new* results might come in just while the user is
trying to tap an item, ending in opening something new that was not seen
yet.

The proposed solution makes the dash *current* results unresponsive and 
visually darkened until the search process ends. Please notice that this might 
take a lot of time, in case of not fast or unreliable connections or depending 
on device speed. This brings a couple of disadvantages, one is visually 
cluttering the interface, resulting in elements changing colours continuously, 
another one is wasting all the time during searches, because the user cannot 
interact thus leaving no choice than to wait for an indeterminate amount of 
time that could be long, as said, depending on different factors (I think this 
can be frustrating).
Sometimes also the user might be happy with one of the current results already 
displayed, but this way he/she cannot interact and has to wait till the end of 
the search and eventually redo the previous search to open the item he/she 
liked.
At the same time, when the darkening goes away, are we sure the user will try 
to tap on the first item thinking only the darkening changed and not also the 
content?

I propose a new solution for those *new* results coming in after the
search is completed: we make those new, and not the current, inactive
for a small amount of time, like 100-200ms (while even animating them
into the view, if we like). This way, not only we aim and really fix the
issue of tapping a new item which just popped in on screen, but also we
both not visually clutter the dash with colour changes and always keep
the dash responsive in case the user find his/herself satisfied with a
currently displayed results and does not care about the pending search
any more.

What you guys think?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1238979

Title:
  Scope result models are cleared on updates

Status in Ubuntu UX bugs:
  New
Status in Unity Media Scanner Scope:
  Invalid
Status in API for Unity scopes integration:
  Invalid
Status in QML plugin for Scopes:
  In Progress
Status in “unity8” package in Ubuntu:
  Triaged

Bug description:
  The result models are cleared when updated, which causes abrupt
  changes in the dash. We need a better way for updating the models
  without clearing them :/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ux/+bug/1238979/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1358340] Re: [Indicators] Complete greeter profiles

2014-09-18 Thread Stephen M. Webb

** Changed in: indicator-sound (Ubuntu)
   Importance: Undecided = High

** Changed in: indicator-sound (Ubuntu)
   Status: New = Confirmed

** Changed in: indicator-transfer (Ubuntu)
   Importance: Undecided = High

** Changed in: indicator-transfer (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-datetime in
Ubuntu.
https://bugs.launchpad.net/bugs/1358340

Title:
  [Indicators] Complete greeter profiles

Status in The Date and Time Indicator:
  Confirmed
Status in The Messaging Menu:
  Confirmed
Status in Sound Menu:
  Confirmed
Status in Transfer Indicator:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in The Unity 8 shell:
  Fix Released
Status in “gsettings-ubuntu-touch-schemas” package in Ubuntu:
  Fix Released
Status in “indicator-datetime” package in Ubuntu:
  New
Status in “indicator-messages” package in Ubuntu:
  New
Status in “indicator-sound” package in Ubuntu:
  Confirmed
Status in “indicator-transfer” package in Ubuntu:
  Confirmed
Status in “ubuntu-system-settings” package in Ubuntu:
  Fix Released
Status in “unity8” package in Ubuntu:
  Fix Released
Status in “unity8” package in Ubuntu RTM:
  Fix Released

Bug description:
  A recent change in the interest of security removed access to the
  indicators when the phone is locked and the greeter is showing.

  This was an accentual change based on a misunderstanding

  There had been a plan to support media playback control via the sound
  indicator. Without this the user must unlock the phone in order to
  simply pause the music or change songs, etc.

  
  Desired resolution:

  - Revert the change that caused this issue

  - Add a switch to System Settings to enable security conscious user to
  switch off Launcher and Greeter access while the phone is locked.
  This setting should *always* be off by default.
  https://wiki.ubuntu.com/SecurityAndPrivacySettings#Locking

To manage notifications about this bug go to:
https://bugs.launchpad.net/indicator-datetime/+bug/1358340/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 781402] Re: Ubuntu 11.04 / Unity freezing when screen is 'woken up'

2014-09-18 Thread joncamfield

This problem (Lenovo Thinkpad S1, Intel graphics) is still present for
me, and the VBlank fix in #12 did /not/  work.

When I resume, the machine often (but not always) does not automatically
show the screen (e.g. it is a lit, but black screen) on the normal
wake actions (open lid, press lenovo's wake button), but on a mouse
event, does show the screen from the point at which the laptop was
suspended, and while the keyboard works (I can ctrl-alt-f1 into a
terminal) and the mouse moves, the screen does not respond to
keyboard/mouse events.

Pkilling myself and restarting x/unity works but never knowing if my
workspace windows will return after suspend is a huge issue.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/781402

Title:
  Ubuntu 11.04 / Unity freezing when screen is 'woken up'

Status in “xorg” package in Ubuntu:
  Invalid

Bug description:
  When i close my laptop's top (or the screen just 'falls to sllep') and
  then open it again (or 'wake the screen up'), everything that i'm
  allowed to do is mouse cursor moving - the picture just freezes. No
  other interactions avaliable. My laptop is ASUS K50IJ, Ubuntu 11.04
  (with Unity).

  Any help would be great!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/781402/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371081] [NEW] if “when locked, allow [...] notifications” is disabled, notifications should not be shown

2014-09-18 Thread John Lenton

Public bug reported:

Under system settings - Privacy  Security - Phone locking there's a
“When locked, allow: notifications and quick settings” checkbox. When it
is unchecked, if the lockscreen is up, notifications should be
suppressed.

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: Confirmed

** Summary changed:

- if when locked, allow [...] notifications is disabled, notifications should 
not be shown
+ if “when locked, allow [...] notifications” is disabled, notifications should 
not be shown

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371081

Title:
  if “when locked, allow [...] notifications” is disabled, notifications
  should not be shown

Status in “unity8” package in Ubuntu:
  Confirmed

Bug description:
  Under system settings - Privacy  Security - Phone locking there's a
  “When locked, allow: notifications and quick settings” checkbox. When
  it is unchecked, if the lockscreen is up, notifications should be
  suppressed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371081/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371081] Re: if “when locked, allow [...] notifications” is disabled, notifications should not be shown

2014-09-18 Thread Matthew Paul Thomas

Confirmed in 14.10 r244.

** Changed in: unity8 (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371081

Title:
  if “when locked, allow [...] notifications” is disabled, notifications
  should not be shown

Status in “unity8” package in Ubuntu:
  Confirmed

Bug description:
  Under system settings - Privacy  Security - Phone locking there's a
  “When locked, allow: notifications and quick settings” checkbox. When
  it is unchecked, if the lockscreen is up, notifications should be
  suppressed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371081/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371058] Re: Regression: Latest apt security update returns Hash Sum mismatch for file: URI:s

2014-09-18 Thread Ubuntu Foundations Team Bug Bot

** Tags added: patch

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1371058

Title:
  Regression: Latest apt security update returns Hash Sum mismatch for
  file: URI:s

Status in “apt” package in Ubuntu:
  In Progress
Status in “apt” source package in Lucid:
  New
Status in “apt” source package in Precise:
  New
Status in “apt” source package in Trusty:
  New
Status in “apt” source package in Utopic:
  In Progress
Status in “apt” package in Debian:
  New

Bug description:
  When running 'apt-get update' on Ubuntu Lucid using 0.7.25.3ubuntu9.16
  I get Hash Sum mismatch when using file: URI:s.

  First time running apt-get update after cleaning /var/lib/dpkg/lists/
  and /var/lib/dpkg/lists/partial it works. However the second time I
  get:

  root@crepes:/etc/apt# apt-get update
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/main Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/restricted Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/universe Translation-en_DK
  Ign file:/mirrors/ubuntu/ubuntu/ lucid-security/multiverse Translation-en_DK
  Get:1 file: lucid-security Release.gpg [198B]  
  Get:2 file: lucid-security Release [57,3kB]   

  Hit http://security.ubuntu.com lucid-security Release.gpg 
  
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/universe 
Translation-en_DK
  Ign http://security.ubuntu.com/ubuntu/ lucid-security/multiverse 
Translation-en_DK
  Hit http://security.ubuntu.com lucid-security Release
  Hit http://security.ubuntu.com lucid-security/main Packages
  Hit http://security.ubuntu.com lucid-security/restricted Packages
  Hit http://security.ubuntu.com lucid-security/universe Packages
  Hit http://security.ubuntu.com lucid-security/multiverse Packages
  W: Failed to fetch 
file:/mirrors/ubuntu/ubuntu/dists/lucid-security/main/binary-amd64/Packages.bz2 
 Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/restricted/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/universe/binary-amd64/Packages.bz2  Hash Sum mismatch

  W: Failed to fetch file:/mirrors/ubuntu/ubuntu/dists/lucid-
  security/multiverse/binary-amd64/Packages.bz2  Hash Sum mismatch

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.

  
  Runnng apt-get -o Acquire::CompressionTypes::Order=gz changing to bz2 every 
second it works. 

  Reverting back to 0.7.25.3ubuntu9.15 it works.

  And, of course, it works if only using http: URI:s.

  Looks like a regression in 0.7.25.3ubuntu9.16

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1371058/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371086] ThreadStacktrace.txt

2014-09-18 Thread Apport retracing service

** Attachment added: ThreadStacktrace.txt
   
https://bugs.launchpad.net/bugs/1371086/+attachment/4207430/+files/ThreadStacktrace.txt

** Tags added: apport-failed-retrace

** Tags removed: need-armhf-retrace

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mtp in Ubuntu.
https://bugs.launchpad.net/bugs/1371086

Title:
  mtp-server crashed with SIGSEGV

Status in “mtp” package in Ubuntu:
  New

Bug description:
  image 245

  It just crashed, I was not transferring anything. I am seeing frequent
  disconnects over mtp today, so that might also be related.

  ProblemType: Crash
  DistroRelease: Ubuntu 14.10
  Package: mtp-server 0.0.4+14.10.20140909-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  CurrentDesktop: Unity
  Date: Thu Sep 18 12:24:20 2014
  ExecutablePath: /usr/bin/mtp-server
  ExecutableTimestamp: 1410235042
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  ProcCmdline: /usr/bin/mtp-server
  ProcCwd: /home/phablet
  SegvAnalysis: Skipped: missing required field Disassembly
  Signal: 11
  SourcePackage: mtp
  Stacktrace:
   #0  0xb6de78d6 in ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   No symbol table info available.
   #1  0xb6b91a9c in ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
   No symbol table info available.
   Backtrace stopped: previous frame identical to this frame (corrupt stack?)
  StacktraceTop:
   ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip plugdev sudo tty video

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mtp/+bug/1371086/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371086] [NEW] mtp-server crashed with SIGSEGV

Public bug reported:

image 245

It just crashed, I was not transferring anything. I am seeing frequent
disconnects over mtp today, so that might also be related.

ProblemType: Crash
DistroRelease: Ubuntu 14.10
Package: mtp-server 0.0.4+14.10.20140909-0ubuntu1
Uname: Linux 3.4.0-5-mako armv7l
ApportVersion: 2.14.7-0ubuntu2
Architecture: armhf
CurrentDesktop: Unity
Date: Thu Sep 18 12:24:20 2014
ExecutablePath: /usr/bin/mtp-server
ExecutableTimestamp: 1410235042
InstallationDate: Installed on 2014-09-18 (0 days ago)
InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
ProcCmdline: /usr/bin/mtp-server
ProcCwd: /home/phablet
SegvAnalysis: Skipped: missing required field Disassembly
Signal: 11
SourcePackage: mtp
Stacktrace:
 #0  0xb6de78d6 in ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
 No symbol table info available.
 #1  0xb6b91a9c in ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
 No symbol table info available.
 Backtrace stopped: previous frame identical to this frame (corrupt stack?)
StacktraceTop:
 ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
 ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dialout dip plugdev sudo tty video

** Affects: mtp (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-crash apport-failed-retrace armhf qa-touch utopic

** Information type changed from Private to Public

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mtp in Ubuntu.
https://bugs.launchpad.net/bugs/1371086

Title:
  mtp-server crashed with SIGSEGV

Status in “mtp” package in Ubuntu:
  New

Bug description:
  image 245

  It just crashed, I was not transferring anything. I am seeing frequent
  disconnects over mtp today, so that might also be related.

  ProblemType: Crash
  DistroRelease: Ubuntu 14.10
  Package: mtp-server 0.0.4+14.10.20140909-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  CurrentDesktop: Unity
  Date: Thu Sep 18 12:24:20 2014
  ExecutablePath: /usr/bin/mtp-server
  ExecutableTimestamp: 1410235042
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  ProcCmdline: /usr/bin/mtp-server
  ProcCwd: /home/phablet
  SegvAnalysis: Skipped: missing required field Disassembly
  Signal: 11
  SourcePackage: mtp
  Stacktrace:
   #0  0xb6de78d6 in ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   No symbol table info available.
   #1  0xb6b91a9c in ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
   No symbol table info available.
   Backtrace stopped: previous frame identical to this frame (corrupt stack?)
  StacktraceTop:
   ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip plugdev sudo tty video

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mtp/+bug/1371086/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371086]

2014-09-18 Thread Apport retracing service

Stacktrace:
 #0  0xb6de78d6 in core::dbus::asio::Executor::on_dbus_remove_timeout 
(timeout=optimized out) at 
/build/buildd/dbus-cpp-4.0.0+14.10.20140909/src/core/dbus/asio/executor.cpp:311
 No locals.
 #1  0xb6b91a9c in ?? () from 
/tmp/apport_sandbox_ol4qN7/lib/arm-linux-gnueabihf/libdbus-1.so.3
 No symbol table info available.
 Backtrace stopped: previous frame identical to this frame (corrupt stack?)
StacktraceSource:
 #0  0xb6de78d6 in core::dbus::asio::Executor::on_dbus_remove_timeout 
(timeout=optimized out) at 
/build/buildd/dbus-cpp-4.0.0+14.10.20140909/src/core/dbus/asio/executor.cpp:311
   [Error: 
/build/buildd/dbus-cpp-4.0.0+14.10.20140909/src/core/dbus/asio/executor.cpp was 
not found in source tree]
 #1  0xb6b91a9c in ?? () from 
/tmp/apport_sandbox_ol4qN7/lib/arm-linux-gnueabihf/libdbus-1.so.3
StacktraceTop:
 core::dbus::asio::Executor::on_dbus_remove_timeout (timeout=optimized out) 
at 
/build/buildd/dbus-cpp-4.0.0+14.10.20140909/src/core/dbus/asio/executor.cpp:311
 ?? () from /tmp/apport_sandbox_ol4qN7/lib/arm-linux-gnueabihf/libdbus-1.so.3

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mtp in Ubuntu.
https://bugs.launchpad.net/bugs/1371086

Title:
  mtp-server crashed with SIGSEGV

Status in “mtp” package in Ubuntu:
  New

Bug description:
  image 245

  It just crashed, I was not transferring anything. I am seeing frequent
  disconnects over mtp today, so that might also be related.

  ProblemType: Crash
  DistroRelease: Ubuntu 14.10
  Package: mtp-server 0.0.4+14.10.20140909-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  CurrentDesktop: Unity
  Date: Thu Sep 18 12:24:20 2014
  ExecutablePath: /usr/bin/mtp-server
  ExecutableTimestamp: 1410235042
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  ProcCmdline: /usr/bin/mtp-server
  ProcCwd: /home/phablet
  SegvAnalysis: Skipped: missing required field Disassembly
  Signal: 11
  SourcePackage: mtp
  Stacktrace:
   #0  0xb6de78d6 in ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   No symbol table info available.
   #1  0xb6b91a9c in ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
   No symbol table info available.
   Backtrace stopped: previous frame identical to this frame (corrupt stack?)
  StacktraceTop:
   ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip plugdev sudo tty video

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mtp/+bug/1371086/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1218289] Re: [dialer app] Incoming call (snap decision) not to spec

** Tags removed: dialer-app-aug-2013 dialer-app-sept-2013 touch-2014-09-11
** Tags added: ota-future

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1218289

Title:
  [dialer app] Incoming call (snap decision) not to spec

Status in Dialer app for Ubuntu Touch:
  Triaged
Status in Ubuntu UX bugs:
  Fix Released
Status in The Unity 8 shell:
  Fix Released
Status in “dialer-app” package in Ubuntu:
  Triaged
Status in “unity8” package in Ubuntu:
  Fix Released
Status in “unity8” source package in Saucy:
  Confirmed

Bug description:
  Current situation:
  Incoming call appears in snap decision format, but missing:
  - Decision buttons not the right visual colours and assets (missing colour 
and combo button)
  - background is currently transparent, so can see content below.

  Desired solution:
  - As per spec, when receiving an incoming call the snap decision should be 
solid background. And the notification buttons and style should be as per 
design.
  - See Notification and Snap Decision spec for full details of the final 
signed off design, 
https://docs.google.com/a/canonical.com/document/d/1puQ9Z0yKqzsQ1VQ1OOBkxgp78iWGnAhAkFXWJFTWIrE/edit

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1218289/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369400] Re: Fails to find the installed drivers

2014-09-18 Thread dino99

udated ubuntu-drivers-common to 0.2.98.3 does not help

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to software-properties in
Ubuntu.
https://bugs.launchpad.net/bugs/1369400

Title:
  Fails to find the installed drivers

Status in “software-properties” package in Ubuntu:
  New

Bug description:
  This Utopic installation have 2 graphic drivers installed: xserver-
  xorg-video-nouveau (1.0.11) and nvidia-331  (331.89), but  the
  'additional drivers' list is empty.

  Running it into a terminal, that error is also seen:

  oem@u64:~$ software-properties-gtk
  /usr/lib/python3/dist-packages/softwareproperties/gtk/utils.py:29: Warning: 
The property GtkButton:use-stock is deprecated and shouldn't be used anymore. 
It will be removed in a future version.
self.builder.add_from_file(path)

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: software-properties-gtk 0.93.1
  ProcVersionSignature: Ubuntu 3.16.0-14.20-generic 3.16.2
  Uname: Linux 3.16.0-14-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Mon Sep 15 07:12:18 2014
  PackageArchitecture: all
  SourcePackage: software-properties
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1369400/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367325] Re: [phone-app] empty state missing in recent view and empty address book

move to be part of first ota after rtm

** Tags removed: touch-2014-09-25
** Tags added: ota1

** Tags removed: ota1
** Tags added: ota-1

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to address-book-app in
Ubuntu.
https://bugs.launchpad.net/bugs/1367325

Title:
  [phone-app] empty state missing in recent view and empty address book

Status in Address Book App:
  Fix Committed
Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in Ubuntu UX bugs:
  Fix Committed
Status in “address-book-app” package in Ubuntu:
  Confirmed
Status in “dialer-app” package in Ubuntu:
  Confirmed

Bug description:
  1. Open Phone app, make sure you didn't receive or made any calls
  2. Carry out a bottom edge swipe
  3. The list is blank

  Same applies for the Address book app

  
---

  Desired solution:
  Please implement the empty state screen as per design.
  It is confusing for the user not seeing anything in this view.
  Please implement a screen saying No recent calls and have a look on the 
empty screen in the messaging app as a reference.

To manage notifications about this bug go to:
https://bugs.launchpad.net/address-book-app/+bug/1367325/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1339883] Re: unity8-dash on the phone has unreasonable CPU usage when system is idle with screen off

** Branch linked: lp:ubuntu/utopic-proposed/unity8

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1339883

Title:
  unity8-dash on the phone has unreasonable CPU usage when system is
  idle with screen off

Status in Qt integration with the Mir display server:
  In Progress
Status in The Ubuntu Power Consumption Project:
  New
Status in “unity8” package in Ubuntu:
  In Progress

Bug description:
  I am attaching tty recordings of htop running on N4 with the latest
  image. This is with screen off, no apps running,  system has settled
  after boot. Three recordings of the major CPU usage offenders are
  included:

  unity8
  smartscopesproxy
  mpdecision (probably not directly related to unity8 but adding for 
completeness, please point me to a better place to report this if you know)

  To replay the tty recordings use ttyplay file.tty (from ubuntu
  package ttyrec)

To manage notifications about this bug go to:
https://bugs.launchpad.net/qtmir/+bug/1339883/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1359337] Re: dialer not remembering current view after lock/unlock

** Tags removed: touch-2014-09-25
** Tags added: ota-1

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1359337

Title:
  dialer not remembering current view after lock/unlock

Status in Dialer app for Ubuntu Touch:
  Confirmed
Status in “dialer-app” package in Ubuntu:
  Confirmed

Bug description:
  build 199
  open dialer
  navigate to contacts page or recents page
  lock the phone
  unlock the phone

  Expected results:
  dialer should be on the page you left it on

  Actual results:
  keypad view is always shown

To manage notifications about this bug go to:
https://bugs.launchpad.net/dialer-app/+bug/1359337/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1350357] Re: Support disabling of user switching per seat

2014-09-18 Thread Mikko Pesari

Using lightdm 1.10.2, I tested setting allow-user-switching to false.
Now, every time I log out of a Unity session I get the The system is
running in low-graphics mode window. None of the options really help -
I have to start lightdm from console to get to the greeter.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1350357

Title:
  Support disabling of user switching per seat

Status in Light Display Manager:
  Fix Released
Status in Light Display Manager 1.10 series:
  Fix Released
Status in “lightdm” package in Ubuntu:
  Fix Released
Status in “lightdm” source package in Trusty:
  Confirmed
Status in “lightdm” source package in Utopic:
  Fix Released

Bug description:
  Let me start by saying it's possible I'm missing some subtleties here,
  and if so, I'd be happy to get a more detailed explanation.

  In LightDM 1.10.1 (Trusty), unity seats are forced to enable user
  switching (in seat-unity.c).  However, I think this is something that
  should be configurable in the display manager.  In a public computing
  environment, fast-user-switching is undesirable, as it interferes with
  serial re-usability and various cleanup tasks.  Most public computing
  labs want to maintain a 1-1 relationship between individuals and
  workstations, and a workstation should either be in use by one user,
  or not in use at all.  In the past, our site has accomplished this in
  various desktop environment configurations (such as the
  org.gnome.desktop.lockdown gsettings, etc).  Unfortunately, most of
  these settings are ignored in Unity (I have filed separate bugs about
  those).

  Obviously, there are workarounds, including stealing all the other
  VTs, or playing stupid D-Bus games, or wrapping X.  Currently, our
  preferred (preferred) solution is to have our custom greeter check
  logind and refuse to do anything other than unlock the existing
  session if a user is already logged in on an X seat, but that's not
  ideal, because you still end up with a second greeter running, and in
  fact that becomes the primary greeter when the original user logs out.

  That having been said, I believe it is the system administrator's
  prerogative to dictate that there shall be one and only one seat
  available on any given workstation, and instruct LightDM not to spawn
  any additional ones.  It would be great if this was added in future
  releases.   Alternatively, if that's not possible because of Unity
  design, it would be great if there was a way for a greeter to say to
  lightdm I'm done, this seat is shutting down, switch back to an
  original session.  (And obviously, doing that if there is no other
  session to switch to would be an error).

To manage notifications about this bug go to:
https://bugs.launchpad.net/lightdm/+bug/1350357/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1369774] Re: Can't make an emergency call when FlightMode is active

** Changed in: dialer-app (Ubuntu)
   Importance: High = Critical

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dialer-app in Ubuntu.
https://bugs.launchpad.net/bugs/1369774

Title:
  Can't make an emergency call when FlightMode is active

Status in “dialer-app” package in Ubuntu:
  New

Bug description:
  We currently lack the ability for an emergency call to be made if
  FlightMode is enabled.

  The dialer-app ( or telepathy-ofono ) needs to recognize this
  condition and disable FlightMode so that the emergency call can be
  made.

  This is missing as of the latest RTM images ( #39 on mako, #44 on
  krillin ).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dialer-app/+bug/1369774/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1350357] Re: Support disabling of user switching per seat

2014-09-18 Thread Mikko Pesari

That is the Trusty version from ubuntu-desktop PPA, all updates are
installed.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1350357

Title:
  Support disabling of user switching per seat

Status in Light Display Manager:
  Fix Released
Status in Light Display Manager 1.10 series:
  Fix Released
Status in “lightdm” package in Ubuntu:
  Fix Released
Status in “lightdm” source package in Trusty:
  Confirmed
Status in “lightdm” source package in Utopic:
  Fix Released

Bug description:
  Let me start by saying it's possible I'm missing some subtleties here,
  and if so, I'd be happy to get a more detailed explanation.

  In LightDM 1.10.1 (Trusty), unity seats are forced to enable user
  switching (in seat-unity.c).  However, I think this is something that
  should be configurable in the display manager.  In a public computing
  environment, fast-user-switching is undesirable, as it interferes with
  serial re-usability and various cleanup tasks.  Most public computing
  labs want to maintain a 1-1 relationship between individuals and
  workstations, and a workstation should either be in use by one user,
  or not in use at all.  In the past, our site has accomplished this in
  various desktop environment configurations (such as the
  org.gnome.desktop.lockdown gsettings, etc).  Unfortunately, most of
  these settings are ignored in Unity (I have filed separate bugs about
  those).

  Obviously, there are workarounds, including stealing all the other
  VTs, or playing stupid D-Bus games, or wrapping X.  Currently, our
  preferred (preferred) solution is to have our custom greeter check
  logind and refuse to do anything other than unlock the existing
  session if a user is already logged in on an X seat, but that's not
  ideal, because you still end up with a second greeter running, and in
  fact that becomes the primary greeter when the original user logs out.

  That having been said, I believe it is the system administrator's
  prerogative to dictate that there shall be one and only one seat
  available on any given workstation, and instruct LightDM not to spawn
  any additional ones.  It would be great if this was added in future
  releases.   Alternatively, if that's not possible because of Unity
  design, it would be great if there was a way for a greeter to say to
  lightdm I'm done, this seat is shutting down, switch back to an
  original session.  (And obviously, doing that if there is no other
  session to switch to would be an error).

To manage notifications about this bug go to:
https://bugs.launchpad.net/lightdm/+bug/1350357/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1350357] Re: Support disabling of user switching per seat

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: lightdm (Ubuntu Trusty)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1350357

Title:
  Support disabling of user switching per seat

Status in Light Display Manager:
  Fix Released
Status in Light Display Manager 1.10 series:
  Fix Released
Status in “lightdm” package in Ubuntu:
  Fix Released
Status in “lightdm” source package in Trusty:
  Confirmed
Status in “lightdm” source package in Utopic:
  Fix Released

Bug description:
  Let me start by saying it's possible I'm missing some subtleties here,
  and if so, I'd be happy to get a more detailed explanation.

  In LightDM 1.10.1 (Trusty), unity seats are forced to enable user
  switching (in seat-unity.c).  However, I think this is something that
  should be configurable in the display manager.  In a public computing
  environment, fast-user-switching is undesirable, as it interferes with
  serial re-usability and various cleanup tasks.  Most public computing
  labs want to maintain a 1-1 relationship between individuals and
  workstations, and a workstation should either be in use by one user,
  or not in use at all.  In the past, our site has accomplished this in
  various desktop environment configurations (such as the
  org.gnome.desktop.lockdown gsettings, etc).  Unfortunately, most of
  these settings are ignored in Unity (I have filed separate bugs about
  those).

  Obviously, there are workarounds, including stealing all the other
  VTs, or playing stupid D-Bus games, or wrapping X.  Currently, our
  preferred (preferred) solution is to have our custom greeter check
  logind and refuse to do anything other than unlock the existing
  session if a user is already logged in on an X seat, but that's not
  ideal, because you still end up with a second greeter running, and in
  fact that becomes the primary greeter when the original user logs out.

  That having been said, I believe it is the system administrator's
  prerogative to dictate that there shall be one and only one seat
  available on any given workstation, and instruct LightDM not to spawn
  any additional ones.  It would be great if this was added in future
  releases.   Alternatively, if that's not possible because of Unity
  design, it would be great if there was a way for a greeter to say to
  lightdm I'm done, this seat is shutting down, switch back to an
  original session.  (And obviously, doing that if there is no other
  session to switch to would be an error).

To manage notifications about this bug go to:
https://bugs.launchpad.net/lightdm/+bug/1350357/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1371081] Re: if “when locked, allow [...] notifications” is disabled, notifications should not be shown

2014-09-18 Thread Matthew Paul Thomas

Ah, I see the problem here.

This setting is supposed to control access to the indicator menus from
the lock screen, and it does. However, people can't reasonably be
expected to know what an indicator menu is. Many things on the screen
act as indicators of various sorts, and the visual design of indicator
menus makes them look rather unlike menus.

Meanwhile, the notifications design placed notifications in a
Notification Centre indicator menu. So when we came to give this
setting an understandable name -- trying to summarize everything that
appeared inside indicator menus -- we settled on Notifications and
quick settings.

Unfortunately, that makes it seem as if notification bubbles themselves
are also controlled by this setting, when they are not.

Possible solutions to this problem:
1. Abolish the setting altogether, never allowing access to indicator menus 
from the lock screen.
2. Find a name that clarifies the current behavior: obviously including the 
Notification Center but obviously not including notification bubbles.
3. Change the name to quick settings, and change its behavior so that it no 
longer controls access to the Notification Center.
4. Change the effect of the setting so that it also controls notification 
bubbles on the lock screen.

Any other ideas?

** Changed in: unity8 (Ubuntu)
   Status: Confirmed = New

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) = Matthew Paul Thomas (mpt)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1371081

Title:
  if “when locked, allow [...] notifications” is disabled, notifications
  should not be shown

Status in “unity8” package in Ubuntu:
  New

Bug description:
  Under system settings - Privacy  Security - Phone locking there's a
  “When locked, allow: notifications and quick settings” checkbox. When
  it is unchecked, if the lockscreen is up, notifications should be
  suppressed.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity8/+bug/1371081/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1367802] Re: sharing a url is not displayed correctly in message view

** Also affects: libqtelegram
   Importance: Undecided
   Status: New

** Changed in: libqtelegram
   Importance: Undecided = Critical

** Changed in: messaging-app (Ubuntu)
   Importance: High = Critical

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1367802

Title:
  sharing a url is not displayed correctly in message view

Status in Libqtelegram - a qt library to access telegram.:
  New
Status in Messaging App:
  In Progress
Status in “messaging-app” package in Ubuntu:
  In Progress

Bug description:
  build 23 on Krillin
  - open browser
  - go to mobile.nytimes.com
  - click one of the news stories displayed
  - after page loads, press the Share button from the Action menu
  - Select messaging-app
  - Note that the url looks correct while it's in the entry field
  - send the message

  Expected result:
  - the shared url should be shown correctly in the messaging thread

  Actual result:
  - the display of the url is all messed up, see the attached picture

  The url that is trying to be shared is:
  http://mobile.nytimes.com/2014/09/10/us/obama-isis-congress.html

To manage notifications about this bug go to:
https://bugs.launchpad.net/libqtelegram/+bug/1367802/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1366418] Re: Bluetooth BCM43142A0 doesn’t work

2014-09-18 Thread Stanislav Yudin

The same situation with my laptop Asus X551MA and Ubuntu 14.04.1 64-bit
- BlueTooth 04CA:2006 doesn't work.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1366418

Title:
  Bluetooth BCM43142A0 doesn’t work

Status in “bluez” package in Ubuntu:
  New

Bug description:
  I’ve installed ubuntu 14.04 and my computer’s builtin bluetooth
  (computer is an Asus x550ln) doesn’t work at all. Bluetooth is not
  displayed in the menu bar, if I open the bluetooth UI and switch on,
  nothing happens and the result of “hcitool dev” is empty.

  I have tried to install the windows driver with ndiswrapper, and the
  bluetooth device seems to be detected as an usb bluetooth device but
  still not working. I then add the device to the bluetooth usb device
  and was able to activate bluetooth in the UI but it does not detect
  any other devices (I’ve tested with a smartphone).

  The driver I have installed can be found in asus page =
  http://www.asus.com/fr/Notebooks_Ultrabooks/X550LN/HelpDesk_Download/
  Select Windows OS, then “bluetooth” section, take the Broadcom driver
  (should be the first one).

  If you extract this archive, you will find a file named “bcbtums-
  win8x64-brcm.inf” which I installed using the following command:

  ndiswrapper -i bcbtums-win8x64-brcm.inf

  Then, the result of “ndiswrapper -l” is:

  bcbtums-win8x64-brcm : driver installed
device (04CA:2006) present

  in usb-devices, I find a device which was not present before
  installation (I might have activated btusb before on this paste):

  T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
  D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04ca ProdID=2006 Rev=01.12
  S:  Manufacturer=Broadcom Corp
  S:  Product=BCM43142A0
  S:  SerialNumber=B8EE6593D989
  C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
  I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

  then, “echo 04ca 2006  /sys/bus/usb/drivers/btusb/new_id”, and I
  can switch usb on, but no device will be detected and I’ve found this
  in the dmesg:

  [2200.843126] Bluetooth: hci0 command 0x1003 tx timeout

  which looks pretty much like a “bluetooth not working” message which I
  don’t understand in details.

  I leave here my full dmesg:

  [0.253889] NetLabel:  domain hash size = 128
  [0.253890] NetLabel:  protocols = UNLABELED CIPSOv4
  [0.253901] NetLabel:  unlabeled traffic allowed by default
  [0.253959] hpet0: at MMIO 0xfed0, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  [0.253965] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  [0.255995] Switched to clocksource hpet
  [0.260468] AppArmor: AppArmor Filesystem Enabled
  [0.260488] pnp: PnP ACPI init
  [0.260500] ACPI: bus type PNP registered
  [0.260592] system 00:00: [mem 0xfed4-0xfed44fff] has been reserved
  [0.260596] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  [0.260642] pnp 00:01: [dma 4]
  [0.260658] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  [0.260678] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  [0.260782] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  [0.260924] system 00:04: [io  0x0680-0x069f] has been reserved
  [0.260927] system 00:04: [io  0x] has been reserved
  [0.260928] system 00:04: [io  0x] has been reserved
  [0.260930] system 00:04: [io  0x] has been reserved
  [0.260932] system 00:04: [io  0x1c00-0x1cfe] has been reserved
  [0.260934] system 00:04: [io  0x1d00-0x1dfe] has been reserved
  [0.260935] system 00:04: [io  0x1e00-0x1efe] has been reserved
  [0.260937] system 00:04: [io  0x1f00-0x1ffe] has been reserved
  [0.260939] system 00:04: [io  0x1800-0x18fe] could not be reserved
  [0.260941] system 00:04: [io  0x164e-0x164f] has been reserved
  [0.260943] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  [0.260969] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
  [0.261012] system 00:06: [io  0x1854-0x1857] has been reserved
  [0.261014] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 
(active)
  [0.261059] system 00:07: [io  0x04d0-0x04d1] has been reserved
  [0.261061] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  [0.261089] system 00:08: [io  0x0240-0x0259] has been reserved
  [0.261091] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  [0.261144] pnp 00:09: Plug and Play ACPI device, IDs FLT0101 SYN0a00 
SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
  [0.261179] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b 
(active)

[Touch-packages] [Bug 1347906] Re: don't display notification when in the message thread

** Tags removed: touch-2014-09-25
** Tags added: ota-1

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to messaging-app in Ubuntu.
https://bugs.launchpad.net/bugs/1347906

Title:
  don't display notification when in the message thread

Status in Messaging App:
  Confirmed
Status in “messaging-app” package in Ubuntu:
  Confirmed
Status in “telephony-service” package in Ubuntu:
  New

Bug description:
  if the messaging app is open and you are in the message thread view
  and receive a message from that same person, we should not display the
  notify-osd. We should still vibrate and/or ring but skip the
  notification as it's not necessary and distracting.

To manage notifications about this bug go to:
https://bugs.launchpad.net/messaging-app/+bug/1347906/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1300722] Re: hud-service is eating up 100% of one of my CPUs in a poll loop

2014-09-18 Thread wilk

I've noticed it when  running emacs-snapshot. emacs is very responsive
at first but after a while (one hour more or less) it's unbearably slow.
Moving the focus from one window to another takes a few seconds. When
that happens, both emacs and hud-service cpu usage go up to 100% (I have
a dual-core CPU).

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to hud in Ubuntu.
https://bugs.launchpad.net/bugs/1300722

Title:
  hud-service is eating up 100% of one of my CPUs in a poll loop

Status in Unity HUD:
  Confirmed
Status in “hud” package in Ubuntu:
  In Progress

Bug description:
  hud-service is polling like crazy:

  Context Switches:
PID  ProcessVoluntary   Involuntary Total
   Ctxt Sw/Sec  Ctxt Sw/Sec  Ctxt Sw/Sec
2295 hud-service  46084.6342.94 46127.58 (very high)
2325 hud-service  0.09 0.00 0.09 (very low)
2329 hud-service  0.07 0.00 0.07 (very low)
2340 hud-service  0.05 0.00 0.05 (very low)
   Total  46084.8442.94 46127.78

  File I/O operations:
   No file I/O operations detected.

  System calls traced:
PID  Process  Syscall   CountRate/Sec
2295 hud-service  poll 83   23124.8503
2295 hud-service  write10   0.2313
2295 hud-service  sendmsg   4   0.0925
2325 hud-service  restart_syscall   1   0.0231
2329 hud-service  restart_syscall   1   0.0231
2340 hud-service  restart_syscall   1   0.0231
   Total  100   23125.2435

  (gdb) where
  #0  0x7fda8121cfbd in poll () at ../sysdeps/unix/syscall-template.S:81
  #1  0x7fda7f1bb4b8 in ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
  #2  0x7fda7f1ba3ff in ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
  #3  0x7fda7f1a49dc in ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
  #4  0x7fda7f1a5464 in ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
  #5  0x7fda82ce9e65 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5DBus.so.5
  #6  0x7fda82d2fc64 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5DBus.so.5
  #7  0x7fda82d30582 in QDBusPendingCallWatcher::waitForFinished() () from 
/usr/lib/x86_64-linux-gnu/libQt5DBus.so.5
  #8  0x7fda83eb940b in DBusMenuImporter::slotMenuAboutToShow() () from 
/usr/lib/x86_64-linux-gnu/libdbusmenu-qt5.so.2
  #9  0x7fda8435d2a6 in QMetaObject::activate(QObject*, int, int, void**) 
() from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
  #10 0x0045ab3f in hud::service::DBusMenuCollector::openMenu(QMenu*, 
unsigned int) ()
  #11 0x0045abd8 in hud::service::DBusMenuCollector::openMenu(QMenu*, 
unsigned int) ()
  #12 0x0045abd8 in hud::service::DBusMenuCollector::openMenu(QMenu*, 
unsigned int) ()
  #13 0x0045abd8 in hud::service::DBusMenuCollector::openMenu(QMenu*, 
unsigned int) ()
  #14 0x0045abd8 in hud::service::DBusMenuCollector::openMenu(QMenu*, 
unsigned int) ()
  #15 0x0045abd8 in hud::service::DBusMenuCollector::openMenu(QMenu*, 
unsigned int) ()
  #16 0x0045ae8d in hud::service::DBusMenuCollector::activate() ()
  #17 0x00441e43 in hud::service::WindowImpl::activate() ()
  #18 0x00439f6a in 
hud::service::QueryImpl::updateToken(QSharedPointerhud::service::Window) ()
  #19 0x0043a672 in hud::service::QueryImpl::refresh() ()
  #20 0x0044b115 in ?? ()
  #21 0x7fda8435d2a6 in QMetaObject::activate(QObject*, int, int, void**) 
() from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
  #22 0x0045662a in 
hud::service::ApplicationListImpl::FocusedWindowChanged(unsigned int, QString 
const, unsigned int) ()
  #23 0x7fda8435d2a6 in QMetaObject::activate(QObject*, int, int, void**) 
() from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
  #24 0x00467361 in 
ComCanonicalUnityWindowStackInterface::FocusedWindowChanged(unsigned int, 
QString const, unsigned int) ()
  #25 0x004678bd in ?? ()
  #26 0x00467c63 in 
ComCanonicalUnityWindowStackInterface::qt_metacall(QMetaObject::Call, int, 
void**) ()
  #27 0x7fda82cf180f in ?? () from /usr/lib/x86_64-linux-gnu/libQt5DBus.so.5
  #28 0x7fda8435e22e in QObject::event(QEvent*) () from 
/usr/lib/x86_64-linux-gnu/libQt5Core.so.5
  #29 0x7fda823d5c2c in QApplicationPrivate::notify_helper(QObject*, 
QEvent*) () from /usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5
  #30 0x7fda823dadf6 in QApplication::notify(QObject*, QEvent*) () from 
/usr/lib/x86_64-linux-gnu/libQt5Widgets.so.5
  #31 0x7fda84335c2d in QCoreApplication::notifyInternal(QObject*, QEvent*) 
() from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5

[Touch-packages] [Bug 1371086] Re: mtp-server crashed with SIGSEGV

** Attachment added: _usr_bin_mtp-server.32011.crash
   
https://bugs.launchpad.net/ubuntu/+source/mtp/+bug/1371086/+attachment/4207497/+files/_usr_bin_mtp-server.32011.crash

** Changed in: mtp (Ubuntu)
 Assignee: (unassigned) = Mathieu Trudel-Lapierre (mathieu-tl)

** Changed in: mtp (Ubuntu)
   Importance: Undecided = Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mtp in Ubuntu.
https://bugs.launchpad.net/bugs/1371086

Title:
  mtp-server crashed with SIGSEGV

Status in “mtp” package in Ubuntu:
  New

Bug description:
  image 245

  It just crashed, I was not transferring anything. I am seeing frequent
  disconnects over mtp today, so that might also be related.

  ProblemType: Crash
  DistroRelease: Ubuntu 14.10
  Package: mtp-server 0.0.4+14.10.20140909-0ubuntu1
  Uname: Linux 3.4.0-5-mako armv7l
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: armhf
  CurrentDesktop: Unity
  Date: Thu Sep 18 12:24:20 2014
  ExecutablePath: /usr/bin/mtp-server
  ExecutableTimestamp: 1410235042
  InstallationDate: Installed on 2014-09-18 (0 days ago)
  InstallationMedia: Ubuntu Utopic Unicorn (development branch) - armhf 
(20140918-020205)
  ProcCmdline: /usr/bin/mtp-server
  ProcCwd: /home/phablet
  SegvAnalysis: Skipped: missing required field Disassembly
  Signal: 11
  SourcePackage: mtp
  Stacktrace:
   #0  0xb6de78d6 in ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   No symbol table info available.
   #1  0xb6b91a9c in ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
   No symbol table info available.
   Backtrace stopped: previous frame identical to this frame (corrupt stack?)
  StacktraceTop:
   ?? () from /usr/lib/arm-linux-gnueabihf/libdbus-cpp.so.4
   ?? () from /lib/arm-linux-gnueabihf/libdbus-1.so.3
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dialout dip plugdev sudo tty video

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mtp/+bug/1371086/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1335007] Re: Can't use pinyin for Chinese in browser URL bar due to Qt.ImhUrlCharactersOnly