[U2] UV and Mount -t CIFS
Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
I had to add the sec=ntlm to the line in my /etc/fstab since about FC18 or so: //shareName mountPointcifs rw,credentials=.myCredentials,_netdev,sec=ntlm,users,nounix,nosetuids,file_mode=0644,dir_mode=0775 0 0 bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 10:16 AM To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
Have you got the ALLOWNFS setting in your uvconfig set to 1 ? Brian -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of George Gallen Sent: 09 October 2013 15:16 To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
No, it's not - it's a 0. But...I didn't have it set to 1 on the old server either, and it worked. If I change it.I assume I would need to bring UV down and restart? What I essentially do is I backup the /uv directory on the old system, Did a fresh install of UV on the new server, then overwrite the /uv directory From the old system It's worked fine in the past - and UV seems to be running healthy on F19 For now, I'm going to use an ftp workaround - I can't bring down UV at the moment. George -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Brian Leach Sent: Wednesday, October 09, 2013 11:46 AM To: 'U2 Users List' Subject: Re: [U2] UV and Mount -t CIFS Have you got the ALLOWNFS setting in your uvconfig set to 1 ? Brian -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of George Gallen Sent: 09 October 2013 15:16 To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
Thanks... I tried all the variations of sec - most mounted - some failed - but none allowed UV to LIST the directory I also added ver=1.0 I may need to setup a ftp server on the printwizard machine, and work around that way until I figure it out. We will be upgrading the RHEL5 to RHEL6 once our server issues are fixed - so maybe RHEL6 will be ok (or not) Found a bunch of things different from RHEL5 to Fedora19 (switches in ftp, mailx and attachments and Few others I forget at the moment). George -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bob Little Sent: Wednesday, October 09, 2013 10:31 AM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS I had to add the sec=ntlm to the line in my /etc/fstab since about FC18 or so: //shareName mountPointcifs rw,credentials=.myCredentials,_netdev,sec=ntlm,users,nounix,nosetuids,file_mode=0644,dir_mode=0775 0 0 bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 10:16 AM To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
Is SELINUX enabled? That's caused me headaches in the past. bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 1:34 PM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS Thanks... I tried all the variations of sec - most mounted - some failed - but none allowed UV to LIST the directory I also added ver=1.0 I may need to setup a ftp server on the printwizard machine, and work around that way until I figure it out. We will be upgrading the RHEL5 to RHEL6 once our server issues are fixed - so maybe RHEL6 will be ok (or not) Found a bunch of things different from RHEL5 to Fedora19 (switches in ftp, mailx and attachments and Few others I forget at the moment). George -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bob Little Sent: Wednesday, October 09, 2013 10:31 AM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS I had to add the sec=ntlm to the line in my /etc/fstab since about FC18 or so: //shareName mountPointcifs rw,credentials=.myCredentials,_netdev,sec=ntlm,users,nounix,nosetuids,file_mode=0644,dir_mode=0775 0 0 bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 10:16 AM To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
No that was the first thing I disabled! -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bob Little Sent: Wednesday, October 09, 2013 2:05 PM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS Is SELINUX enabled? That's caused me headaches in the past. bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 1:34 PM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS Thanks... I tried all the variations of sec - most mounted - some failed - but none allowed UV to LIST the directory I also added ver=1.0 I may need to setup a ftp server on the printwizard machine, and work around that way until I figure it out. We will be upgrading the RHEL5 to RHEL6 once our server issues are fixed - so maybe RHEL6 will be ok (or not) Found a bunch of things different from RHEL5 to Fedora19 (switches in ftp, mailx and attachments and Few others I forget at the moment). George -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Bob Little Sent: Wednesday, October 09, 2013 10:31 AM To: U2 Users List Subject: Re: [U2] UV and Mount -t CIFS I had to add the sec=ntlm to the line in my /etc/fstab since about FC18 or so: //shareName mountPointcifs rw,credentials=.myCredentials,_netdev,sec=ntlm,users,nounix,nosetuids,file_mode=0644,dir_mode=0775 0 0 bob little applications architect independent contractor market america, inc. 1302 pleasant ridge rd. greensboro, nc 27409 Phone: 336-698-4367 Cell: 248-675-5515 Skype: boblittle904 From: u2-users-boun...@listserver.u2ug.org [u2-users-boun...@listserver.u2ug.org] on behalf of George Gallen [ggal...@wyanokegroup.com] Sent: Wednesday, October 09, 2013 10:16 AM To: U2 Users Subject: [U2] UV and Mount -t CIFS Ok... When I had RHEL5 and UV 10.0.2 running, If I did a mount using type cifs All I needed to do in UV was 1F , 2/mnt/mountname, 3D_SOURCE And I could list the directory, no problem. Due to a server issue, we had to put an emergency server in place that is Running Fedora19 (64 bit) and installed the UV 10.0.2 - which appears to Run fine. EXCEPT - when I mount the share Now when I attempt to LIST the File (or OPENPATH /mnt/sharename) it bombs out Gives me Unable to open -filename- I can as non-root, go into this share, create files, delete files and modify files so it Also works as root. So, I'm not sure if this is a UV related issue or a Fedora19/Windows machine share problem. Any ideas? I'm currently doing: mount -t cifs -o rw,username=windowsloginname //Sharename,file_mode=0777,dir_mode=0777,cifsacl /mnt/printwizard What we do is use lpd to print our PCL to printwizard (which works) Printwizard then produces a PDF (which works) Then we read the PDF from the share on the printwizard machine (which is what is not working). ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
On 09/10/13 16:59, George Gallen wrote: No, it's not - it's a 0. But...I didn't have it set to 1 on the old server either, and it worked. If I change it.I assume I would need to bring UV down and restart? What I essentially do is I backup the /uv directory on the old system, Did a fresh install of UV on the new server, then overwrite the /uv directory From the old system Are your user numbers the same on the new system as the old - check who owns the files by listing them on the machine the disk is physically in. Cheers, Wol ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] UV and Mount -t CIFS
Yes, when I setup the server, I added each user and manually assigned them the uid/gid from the other server, This way when I overlay the data from the other system, everything works as planned (at least I keep telling Myself that). George -Original Message- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Wols Lists Sent: Wednesday, October 09, 2013 2:07 PM To: u2-users@listserver.u2ug.org Subject: Re: [U2] UV and Mount -t CIFS On 09/10/13 16:59, George Gallen wrote: No, it's not - it's a 0. But...I didn't have it set to 1 on the old server either, and it worked. If I change it.I assume I would need to bring UV down and restart? What I essentially do is I backup the /uv directory on the old system, Did a fresh install of UV on the new server, then overwrite the /uv directory From the old system Are your user numbers the same on the new system as the old - check who owns the files by listing them on the machine the disk is physically in. Cheers, Wol ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
