Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Stuart Pierce]

Check the config file and see if it is actually set, otherwise try
unchecking it, reboot, check it, and reboot.

On Tue, November 1, 2016 6:06 pm, Chris Fabien wrote:
> Well it did it agian, i guess i am going to replace the radios and see if
>  that fixes it.
>
> On Nov 1, 2016 11:50 AM, "Chris Fabien"  wrote:
>
>
>> Yes both sides are powerbeam m5 now
>>
>>
>> On Nov 1, 2016 11:42 AM, "Josh Luthman" 
>> wrote:
>>
>>
>>> Both sides are Powerbeams now, right?
>>>
>>>
>>> I know I had an issue with Powerbeams doing WDS/bridging when the AP
>>> was something else...Nanobridge I think?
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>> On Tue, Nov 1, 2016 at 11:39 AM, Chris Fabien 
>>> wrote:
>>>
>>>
 We installed the link on  5.6.9 the previous link was airgrid M5 on
 5.5.6


 On Nov 1, 2016 11:22 AM, "Josh Luthman"
 
 wrote:


> That shouldn't matter if it's really doing WDS.
>
>
> Did you install this link with 5.6.9 and the problem was always
> there or did you upgrade from an older version and it started
> then?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien
> 
> wrote:
>
>
>> Yes we do matt. We have used Ubiquiti M series radios for
>> backhauls all over our Network so I checked that WDS was enabled
>> on both sides several times... I have made that mistake in the
>> past.
>>
>> The only thing that I noticed which was unusual was the tower
>> crew swapped the access point and station side of the link so
>> initially the access point was on the remote Tower. I don't
>> think that should cause a problem but since it was different
>> than what we typically do I changed that this morning. The
>> problem has not reoccurred yet but it has only been a few hours.
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Chris Fabien]

Well it did it agian, i guess i am going to replace the radios and see if
that fixes it.

On Nov 1, 2016 11:50 AM, "Chris Fabien"  wrote:

> Yes both sides are powerbeam m5 now
>
> On Nov 1, 2016 11:42 AM, "Josh Luthman" 
> wrote:
>
>> Both sides are Powerbeams now, right?
>>
>> I know I had an issue with Powerbeams doing WDS/bridging when the AP was
>> something else...Nanobridge I think?
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Tue, Nov 1, 2016 at 11:39 AM, Chris Fabien 
>> wrote:
>>
>>> We installed the link on  5.6.9 the previous link was airgrid M5 on 5.5.6
>>>
>>> On Nov 1, 2016 11:22 AM, "Josh Luthman" 
>>> wrote:
>>>
 That shouldn't matter if it's really doing WDS.

 Did you install this link with 5.6.9 and the problem was always there
 or did you upgrade from an older version and it started then?


 Josh Luthman
 Office: 937-552-2340
 Direct: 937-552-2343
 1100 Wayne St
 Suite 1337
 Troy, OH 45373

 On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien 
 wrote:

> Yes we do matt. We have used Ubiquiti M series radios for  backhauls
> all over our Network so I checked that WDS was enabled on both sides
> several times... I have made that mistake in the past.
>
> The only thing that I noticed which was unusual was the tower crew
> swapped the access point and station side of the link so initially the
> access point was on the remote Tower. I don't think that should cause a
> problem but since it was different than what we typically do I changed 
> that
> this morning. The problem has not reoccurred yet but it has only been a 
> few
> hours.
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>

 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] 15 mile link limitation on AC

[alex phillips]

https://community.ubnt.com/t5/airMAX-AC/Rocket-AC-ACK-Distance-No-Ack-option/m-p/1214127#M4915

Are there any work around.I setup a new AC network to upgrade our M
network and its not working for clients 15+ miles.  Since this is a
mountain top network so its sees out far.  Need to keep seeing out far.

I am dreading having to switch to another product if this can't be resolved.

Thanks for any help.

*Alex Phillips*
CEO and General Manager
RBNS.net
HighSpeedLink.net
*WISPA.org Board of Directors ** (2011-2017)*
*WISPA President (2015-2017)*
*540-908-3993*
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Chris Fabien]

Yes both sides are powerbeam m5 now

On Nov 1, 2016 11:42 AM, "Josh Luthman"  wrote:

> Both sides are Powerbeams now, right?
>
> I know I had an issue with Powerbeams doing WDS/bridging when the AP was
> something else...Nanobridge I think?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Nov 1, 2016 at 11:39 AM, Chris Fabien  wrote:
>
>> We installed the link on  5.6.9 the previous link was airgrid M5 on 5.5.6
>>
>> On Nov 1, 2016 11:22 AM, "Josh Luthman" 
>> wrote:
>>
>>> That shouldn't matter if it's really doing WDS.
>>>
>>> Did you install this link with 5.6.9 and the problem was always there or
>>> did you upgrade from an older version and it started then?
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>> On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien 
>>> wrote:
>>>
 Yes we do matt. We have used Ubiquiti M series radios for  backhauls
 all over our Network so I checked that WDS was enabled on both sides
 several times... I have made that mistake in the past.

 The only thing that I noticed which was unusual was the tower crew
 swapped the access point and station side of the link so initially the
 access point was on the remote Tower. I don't think that should cause a
 problem but since it was different than what we typically do I changed that
 this morning. The problem has not reoccurred yet but it has only been a few
 hours.

 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Josh Luthman]

Both sides are Powerbeams now, right?

I know I had an issue with Powerbeams doing WDS/bridging when the AP was
something else...Nanobridge I think?


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Nov 1, 2016 at 11:39 AM, Chris Fabien  wrote:

> We installed the link on  5.6.9 the previous link was airgrid M5 on 5.5.6
>
> On Nov 1, 2016 11:22 AM, "Josh Luthman" 
> wrote:
>
>> That shouldn't matter if it's really doing WDS.
>>
>> Did you install this link with 5.6.9 and the problem was always there or
>> did you upgrade from an older version and it started then?
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien 
>> wrote:
>>
>>> Yes we do matt. We have used Ubiquiti M series radios for  backhauls all
>>> over our Network so I checked that WDS was enabled on both sides several
>>> times... I have made that mistake in the past.
>>>
>>> The only thing that I noticed which was unusual was the tower crew
>>> swapped the access point and station side of the link so initially the
>>> access point was on the remote Tower. I don't think that should cause a
>>> problem but since it was different than what we typically do I changed that
>>> this morning. The problem has not reoccurred yet but it has only been a few
>>> hours.
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Chris Fabien]

We installed the link on  5.6.9 the previous link was airgrid M5 on 5.5.6

On Nov 1, 2016 11:22 AM, "Josh Luthman"  wrote:

> That shouldn't matter if it's really doing WDS.
>
> Did you install this link with 5.6.9 and the problem was always there or
> did you upgrade from an older version and it started then?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien  wrote:
>
>> Yes we do matt. We have used Ubiquiti M series radios for  backhauls all
>> over our Network so I checked that WDS was enabled on both sides several
>> times... I have made that mistake in the past.
>>
>> The only thing that I noticed which was unusual was the tower crew
>> swapped the access point and station side of the link so initially the
>> access point was on the remote Tower. I don't think that should cause a
>> problem but since it was different than what we typically do I changed that
>> this morning. The problem has not reoccurred yet but it has only been a few
>> hours.
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Josh Luthman]

Let me rephrase - were the Powerbeams installed with 5.6.9?


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Nov 1, 2016 at 11:22 AM, Josh Luthman 
wrote:

> That shouldn't matter if it's really doing WDS.
>
> Did you install this link with 5.6.9 and the problem was always there or
> did you upgrade from an older version and it started then?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien  wrote:
>
>> Yes we do matt. We have used Ubiquiti M series radios for  backhauls all
>> over our Network so I checked that WDS was enabled on both sides several
>> times... I have made that mistake in the past.
>>
>> The only thing that I noticed which was unusual was the tower crew
>> swapped the access point and station side of the link so initially the
>> access point was on the remote Tower. I don't think that should cause a
>> problem but since it was different than what we typically do I changed that
>> this morning. The problem has not reoccurred yet but it has only been a few
>> hours.
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Josh Luthman]

That shouldn't matter if it's really doing WDS.

Did you install this link with 5.6.9 and the problem was always there or
did you upgrade from an older version and it started then?


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Tue, Nov 1, 2016 at 11:19 AM, Chris Fabien  wrote:

> Yes we do matt. We have used Ubiquiti M series radios for  backhauls all
> over our Network so I checked that WDS was enabled on both sides several
> times... I have made that mistake in the past.
>
> The only thing that I noticed which was unusual was the tower crew swapped
> the access point and station side of the link so initially the access point
> was on the remote Tower. I don't think that should cause a problem but
> since it was different than what we typically do I changed that this
> morning. The problem has not reoccurred yet but it has only been a few
> hours.
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Chris Fabien]

Yes we do matt. We have used Ubiquiti M series radios for  backhauls all
over our Network so I checked that WDS was enabled on both sides several
times... I have made that mistake in the past.

The only thing that I noticed which was unusual was the tower crew swapped
the access point and station side of the link so initially the access point
was on the remote Tower. I don't think that should cause a problem but
since it was different than what we typically do I changed that this
morning. The problem has not reoccurred yet but it has only been a few
hours.
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[Matt Hoppes]

Do you have wds enabled on both radios?

> On Nov 1, 2016, at 08:33, James Wilson  wrote:
> 
> Not much help here, but we haven't run into any of our radios having any 
> problem passing along or receiving DHCP on any of our radios with any 
> versions of firmware.
> 
> 
>> On Nov 1, 2016 8:13 AM, "Chris Fabien"  wrote:
>> I just upgraded a backhaul link from old airgrid M5s to Powerbeam M5s 
>> running XW 5.6.9. This link runs from a main tower with a router on an OSPF 
>> ring to a remote repeater which is just bridged back to the main tower. The 
>> main tower has a mikrotik doing DHCP relay back to our powercode BMU DHCP 
>> server. The link has WDS enabled to make it transparent.
>> 
>> After upgrading the link, I have a problem where after some time, a few 
>> hours or a few days, the CPEs past the link (ubnt and ePMP) cannot renew 
>> their DHCP lease. Rebooting the backhaul radios fixes it. The remote tower 
>> just has a dumb switch and has been in service and stable for years with the 
>> previous airgrid link. The link has good signal and no signs of 
>> interference. Nothing unusual shows up in the logs on either end .
>> 
>> Anyone seen this behavior or any ideas? 
>> 
>> 
>> 
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Any WDS Bug in XW 5.6.9?

[James Wilson]

Not much help here, but we haven't run into any of our radios having any
problem passing along or receiving DHCP on any of our radios with any
versions of firmware.

On Nov 1, 2016 8:13 AM, "Chris Fabien"  wrote:

> I just upgraded a backhaul link from old airgrid M5s to Powerbeam M5s
> running XW 5.6.9. This link runs from a main tower with a router on an OSPF
> ring to a remote repeater which is just bridged back to the main tower. The
> main tower has a mikrotik doing DHCP relay back to our powercode BMU DHCP
> server. The link has WDS enabled to make it transparent.
>
> After upgrading the link, I have a problem where after some time, a few
> hours or a few days, the CPEs past the link (ubnt and ePMP) cannot renew
> their DHCP lease. Rebooting the backhaul radios fixes it. The remote tower
> just has a dumb switch and has been in service and stable for years with
> the previous airgrid link. The link has good signal and no signs of
> interference. Nothing unusual shows up in the logs on either end .
>
> Anyone seen this behavior or any ideas?
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users