Not much help here, but we haven't run into any of our radios having any problem passing along or receiving DHCP on any of our radios with any versions of firmware.
On Nov 1, 2016 8:13 AM, "Chris Fabien" <[email protected]> wrote: > I just upgraded a backhaul link from old airgrid M5s to Powerbeam M5s > running XW 5.6.9. This link runs from a main tower with a router on an OSPF > ring to a remote repeater which is just bridged back to the main tower. The > main tower has a mikrotik doing DHCP relay back to our powercode BMU DHCP > server. The link has WDS enabled to make it transparent. > > After upgrading the link, I have a problem where after some time, a few > hours or a few days, the CPEs past the link (ubnt and ePMP) cannot renew > their DHCP lease. Rebooting the backhaul radios fixes it. The remote tower > just has a dumb switch and has been in service and stable for years with > the previous airgrid link. The link has good signal and no signs of > interference. Nothing unusual shows up in the logs on either end . > > Anyone seen this behavior or any ideas? > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
