Do you have wds enabled on both radios?
> On Nov 1, 2016, at 08:33, James Wilson <[email protected]> wrote: > > Not much help here, but we haven't run into any of our radios having any > problem passing along or receiving DHCP on any of our radios with any > versions of firmware. > > >> On Nov 1, 2016 8:13 AM, "Chris Fabien" <[email protected]> wrote: >> I just upgraded a backhaul link from old airgrid M5s to Powerbeam M5s >> running XW 5.6.9. This link runs from a main tower with a router on an OSPF >> ring to a remote repeater which is just bridged back to the main tower. The >> main tower has a mikrotik doing DHCP relay back to our powercode BMU DHCP >> server. The link has WDS enabled to make it transparent. >> >> After upgrading the link, I have a problem where after some time, a few >> hours or a few days, the CPEs past the link (ubnt and ePMP) cannot renew >> their DHCP lease. Rebooting the backhaul radios fixes it. The remote tower >> just has a dumb switch and has been in service and stable for years with the >> previous airgrid link. The link has good signal and no signs of >> interference. Nothing unusual shows up in the logs on either end . >> >> Anyone seen this behavior or any ideas? >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
