[Bug 1810239] Re: amd_iommu conflict with Marvell 88SE9230 SATA Controller
I've only recently traced the issue to the iommu kernel option. This device has been unstable since I bought it and I pull it out occasionally to see if the driver issues have been addressed. I'm afraid that the test system I'm using is currently unavailable. I'll post an update when I have a chance for fresh testing. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell 88SE9230 SATA Controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1089768] Re: When IOMMU enabled, devices attached to Marvell 88SE9128 controller not recognized
I've uploaded my logs under ticket - https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1810239 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1089768 Title: When IOMMU enabled, devices attached to Marvell 88SE9128 controller not recognized To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
Switched back to the Stock 18.04 LTS kernel and installed - amdgpu-pro-18.50-708488-ubuntu-18.04 - https://www.amd.com/en/support/kb/release-notes/rn-rad-lin-18-50-unified With straight amdgpu support VDPAU doesn't work correctly and I needed to install the full amdgpu-pro version. So far system is stable and I haven't had any new amdgpu lockups. I'd prefer to use the pure amdgpu opensource drive, but even the upstream 4.20 kernel has issues. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1804505] Re: Kubuntu 18.04.01 - Ryzen 2400G / AMDGPU - Random system freezes
I appear to have a new variant of this issue using the Athlon 200GE CPU Reference - https://bugs.launchpad.net/linux/+bug/1810546 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1804505 Title: Kubuntu 18.04.01 - Ryzen 2400G / AMDGPU - Random system freezes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1804505/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226974/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226977/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226978/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226975/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226976/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226968/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226966/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226973/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226971/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226972/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226970/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
apport information ** Description changed: System - AMD Athlon 200GE - Gigabyte GA-B450M-S2H board - latest F2c Firmware - Ubuntu 18.04.1 LTS Reproducible with kernels - linux-image-generic-hwe-18.04 version 4.18.0.13.63 - linux-image-unsigned-4.20.0-042000rc4-generic_4.20.0-042000rc4.201812030528_amd64.deb --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2016-08-15 (872 days ago) InstallationMedia: Mythbuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Package: linux (not installed) Tags: bionic Uname: Linux 4.20.0-042000rc4-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to bionic on 2019-01-03 (1 days ago) UserGroups: _MarkForUpload: True + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.5 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: mythfe 2175 F mythfrontend.re + mythfe 2181 F pulseaudio + /dev/snd/pcmC0D3p: mythfe 2175 F...m mythfrontend.re + DistroRelease: Ubuntu 18.04 + HibernationDevice: RESUME=/dev/mythnew/swap + InstallationDate: Installed on 2016-08-15 (872 days ago) + InstallationMedia: Mythbuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) + MachineType: Gigabyte Technology Co., Ltd. B450M S2H + Package: linux (not installed) + ProcFB: 0 amdgpudrmfb + ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/mythnew-myth_root ro verbose + ProcVersionSignature: Ubuntu 4.18.0-13.14~18.04.1-generic 4.18.17 + PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-4.18.0-13-generic N/A + linux-backports-modules-4.18.0-13-generic N/A + linux-firmware 1.173.2 + RfKill: + + Tags: bionic + Uname: Linux 4.18.0-13-generic x86_64 + UpgradeStatus: Upgraded to bionic on 2019-01-03 (1 days ago) + UserGroups: + + _MarkForUpload: True + dmi.bios.date: 12/04/2018 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: F2c + dmi.board.asset.tag: Default string + dmi.board.name: B450M S2H + dmi.board.vendor: Gigabyte Technology Co., Ltd. + dmi.board.version: x.x + dmi.chassis.asset.tag: Default string + dmi.chassis.type: 3 + dmi.chassis.vendor: Default string + dmi.chassis.version: Default string + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF2c:bd12/04/2018:svnGigabyteTechnologyCo.,Ltd.:pnB450MS2H:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB450MS2H:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: + dmi.product.family: Default string + dmi.product.name: B450M S2H + dmi.product.sku: Default string + dmi.product.version: Default string + dmi.sys.vendor: Gigabyte Technology Co., Ltd. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226965/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226969/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
Another potential upstream BZ - https://bugs.freedesktop.org/show_bug.cgi?id=108098 ** Bug watch added: freedesktop.org Bugzilla #108098 https://bugs.freedesktop.org/show_bug.cgi?id=108098 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
# lspci -nn | grep -E 'VGA|Display' 0a:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Vega [Radeon Vega 8 Mobile] [1002:15dd] (rev cb) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226956/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
Reproduced with Mainline kernel wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v4.20-rc4/linux- image- unsigned-4.20.0-042000rc4-generic_4.20.0-042000rc4.201812030528_amd64.deb https://kernel.ubuntu.com/~kernel-ppa/mainline/v4.20-rc4/linux- modules-4.20.0-042000rc4-generic_4.20.0-042000rc4.201812030528_amd64.deb apt-get install linux*4.20* New error message [ 6891.737234] gmc_v9_0_process_interrupt: 14 callbacks suppressed [ 6891.737240] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737247] amdgpu :0a:00.0: in page starting at address 0x00010130 from 27 [ 6891.737250] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00101031 [ 6891.737259] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737262] amdgpu :0a:00.0: in page starting at address 0x00010130 from 27 [ 6891.737265] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737274] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737277] amdgpu :0a:00.0: in page starting at address 0x00010130 from 27 [ 6891.737279] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737287] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737290] amdgpu :0a:00.0: in page starting at address 0x000101301000 from 27 [ 6891.737293] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737301] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737303] amdgpu :0a:00.0: in page starting at address 0x00010130 from 27 [ 6891.737306] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737314] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737317] amdgpu :0a:00.0: in page starting at address 0x000101301000 from 27 [ 6891.737319] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737327] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737330] amdgpu :0a:00.0: in page starting at address 0x00010130 from 27 [ 6891.737332] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737340] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737343] amdgpu :0a:00.0: in page starting at address 0x000101301000 from 27 [ 6891.737345] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737353] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737356] amdgpu :0a:00.0: in page starting at address 0x000101302000 from 27 [ 6891.737358] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6891.737366] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768, for process Xorg pid 1741 thread amdgpu_cs:0 pid 1793) [ 6891.737369] amdgpu :0a:00.0: in page starting at address 0x000101302000 from 27 [ 6891.737372] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [ 6901.825330] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=667244, emitted seq=667245 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
Note that crash is happening with MPEG2 and H.264 video playback under MythTV ** Bug watch added: Linux Kernel Bug Tracker #199749 https://bugzilla.kernel.org/show_bug.cgi?id=199749 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
This appears to be similar to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1767667 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1804505 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1772081 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
Potential upstream kernel issue https://bugzilla.kernel.org/show_bug.cgi?id=199749 ** Also affects: linux via https://bugzilla.kernel.org/show_bug.cgi?id=199749 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] Re: AMDGPU VMC page fault with Athlon 200GE APU
Example error message with 4.18.0.13.63 kernel [11569.691337] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691344] amdgpu :0a:00.0: at page 0x00010620 from 27 [11569.691348] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x00101031 [11569.691356] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691359] amdgpu :0a:00.0: at page 0x00010620 from 27 [11569.691362] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691370] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691373] amdgpu :0a:00.0: at page 0x00010620 from 27 [11569.691376] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691383] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691386] amdgpu :0a:00.0: at page 0x000106201000 from 27 [11569.691389] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691396] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691399] amdgpu :0a:00.0: at page 0x00010620 from 27 [11569.691402] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691409] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691412] amdgpu :0a:00.0: at page 0x000106201000 from 27 [11569.691415] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691422] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691425] amdgpu :0a:00.0: at page 0x00010620 from 27 [11569.691428] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691435] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691438] amdgpu :0a:00.0: at page 0x000106201000 from 27 [11569.691441] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691448] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691451] amdgpu :0a:00.0: at page 0x000106201000 from 27 [11569.691454] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11569.691461] amdgpu :0a:00.0: [gfxhub] VMC page fault (src_id:0 ring:24 vmid:1 pasid:32768) [11569.691464] amdgpu :0a:00.0: at page 0x000106204000 from 27 [11569.691467] amdgpu :0a:00.0: VM_L2_PROTECTION_FAULT_STATUS:0x [11579.766498] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=42143, last emitted seq=42144 [11579.766504] [drm] GPU recovery disabled. ** Tags added: apport-collected bionic ** Description changed: System - AMD Athlon 200GE - Gigabyte GA-B450M-S2H board - latest F2c Firmware - Ubuntu 18.04.1 LTS Reproducible with kernels - linux-image-generic-hwe-18.04 version 4.18.0.13.63 - linux-image-unsigned-4.20.0-042000rc4-generic_4.20.0-042000rc4.201812030528_amd64.deb + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.5 + Architecture: amd64 + DistroRelease: Ubuntu 18.04 + InstallationDate: Installed on 2016-08-15 (872 days ago) + InstallationMedia: Mythbuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) + Package: linux (not installed) + Tags: bionic + Uname: Linux 4.20.0-042000rc4-generic x86_64 + UnreportableReason: The running kernel is not an Ubuntu kernel + UpgradeStatus: Upgraded to bionic on 2019-01-03 (1 days ago) + UserGroups: + + _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1810546/+attachment/5226957/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810546] [NEW] AMDGPU VMC page fault with Athlon 200GE APU
Public bug reported: System - AMD Athlon 200GE - Gigabyte GA-B450M-S2H board - latest F2c Firmware - Ubuntu 18.04.1 LTS Reproducible with kernels - linux-image-generic-hwe-18.04 version 4.18.0.13.63 - linux-image-unsigned-4.20.0-042000rc4-generic_4.20.0-042000rc4.201812030528_amd64.deb --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2016-08-15 (872 days ago) InstallationMedia: Mythbuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) Package: linux (not installed) Tags: bionic Uname: Linux 4.20.0-042000rc4-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to bionic on 2019-01-03 (1 days ago) UserGroups: _MarkForUpload: True ** Affects: linux Importance: Unknown Status: Unknown ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810546 Title: AMDGPU VMC page fault with Athlon 200GE APU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810546/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Re: amd_iommu conflict with Marvell Sata controller
Rebooted with the 4.20.0-042000-generic and the option "amd_iommu=off" and the card works Jan 02 22:10:52 mythfe-amd kernel: ata8.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66 Jan 02 22:10:52 mythfe-amd kernel: ata8.00: configured for UDMA/66 Jan 02 22:10:52 mythfe-amd kernel: ata4.00: ATA-8: ST3500418AS, CC46, max UDMA/133 Jan 02 22:10:52 mythfe-amd kernel: ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) Jan 02 22:10:52 mythfe-amd kernel: ata4.00: configured for UDMA/133 Jan 02 22:10:52 mythfe-amd kernel: ata2.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133 Jan 02 22:10:52 mythfe-amd kernel: ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 32) Jan 02 22:10:52 mythfe-amd kernel: ata2.00: configured for UDMA/133 Jan 02 22:10:52 mythfe-amd kernel: scsi 1:0:0:0: Direct-Access ATA ST3250820AS EPQ: 0 ANSI: 5 Jan 02 22:10:52 mythfe-amd kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0 Jan 02 22:10:52 mythfe-amd kernel: sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) Jan 02 22:10:52 mythfe-amd kernel: scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5 Jan 02 22:10:52 mythfe-amd kernel: sd 1:0:0:0: [sda] Write Protect is off -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Re: amd_iommu conflict with Marvell Sata controller
I attempted a boot with the following upstream kernel packages linux-image-unsigned-4.20.0-042000-generic_4.20.0-042000.201812232030_amd64.deb linux-modules-4.20.0-042000-generic_4.20.0-042000.201812232030_amd64.deb On boot I see the following errors Jan 02 22:09:23 mythfe-amd kernel: ata4.00: qc timeout (cmd 0xec) Jan 02 22:09:23 mythfe-amd kernel: ata2.00: qc timeout (cmd 0xec) Jan 02 22:09:23 mythfe-amd kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: qc timeout (cmd 0xef) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: failed to set xfermode (err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata2.00: qc timeout (cmd 0xec) Jan 02 22:09:23 mythfe-amd kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata4.00: qc timeout (cmd 0xec) Jan 02 22:09:23 mythfe-amd kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata4: limiting SATA link speed to 1.5 Gbps Jan 02 22:09:23 mythfe-amd kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: qc timeout (cmd 0xa1) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: revalidation failed (errno=-5) Jan 02 22:09:23 mythfe-amd kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: qc timeout (cmd 0xa1) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: revalidation failed (errno=-5) Jan 02 22:09:23 mythfe-amd kernel: ata8.00: disabled Jan 02 22:09:23 mythfe-amd kernel: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata2.00: qc timeout (cmd 0xec) Jan 02 22:09:23 mythfe-amd kernel: ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jan 02 22:09:23 mythfe-amd kernel: ata4.00: qc timeout (cmd 0xec) Jan 02 22:09:23 mythfe-amd kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Jan 02 22:09:23 mythfe-amd kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310) Jan 02 22:09:23 mythfe-amd kernel: ata10: SATA link down (SStatus 0 SControl 330) Jan 02 22:09:23 mythfe-amd kernel: ata13: SATA link down (SStatus 0 SControl 330) Jan 02 22:09:23 mythfe-amd kernel: ata14: SATA link down (SStatus 0 SControl 330) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Re: amd_iommu conflict with Marvell Sata controller
Looks like there is a new upstream issue with - https://bugzilla.kernel.org/show_bug.cgi?id=199733 ** Bug watch added: Linux Kernel Bug Tracker #199733 https://bugzilla.kernel.org/show_bug.cgi?id=199733 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Re: amd_iommu conflict with Marvell Sata controller
** Bug watch added: Debian Bug tracker #700975 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700975 ** Also affects: linux (Debian) via https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700975 Importance: Unknown Status: Unknown ** Bug watch added: Red Hat Bugzilla #1337313 https://bugzilla.redhat.com/show_bug.cgi?id=1337313 ** Also affects: linux (Fedora) via https://bugzilla.redhat.com/show_bug.cgi?id=1337313 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226200/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226201/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226199/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226203/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226195/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226205/+files/WifiSyslog.txt ** Bug watch added: Linux Kernel Bug Tracker #42679 https://bugzilla.kernel.org/show_bug.cgi?id=42679 ** Also affects: linux via https://bugzilla.kernel.org/show_bug.cgi?id=42679 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226202/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226204/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226196/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226194/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226197/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226198/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Re: amd_iommu conflict with Marvell Sata controller
apport information ** Tags added: apport-collected bionic ** Description changed: This bug is to confirm that the Marvell 88SE9230 chipset bug presents under AMD's IOMMU implementation with Ubuntu 18.04 and the latest HWE Kernel This has similar characteristics to - https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768 System - AMD Athlon 200GE - Gigabyte GA-B450M-S2H board - Marvell 88SE9230 SATA Controller with latest Firmware Kernel - Ubuntu 4.18.0-13.14~18.04.1-generic 4.18.17 If I boot the HWE 4.18.0-13-generic Kernel I get the errors reported above If I boot with "amd_iommu=off" the drives appear to work correctly. + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.5 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: mythfe 1170 F pulseaudio + CurrentDesktop: XFCE + DistroRelease: Ubuntu 18.04 + HibernationDevice: RESUME=/dev/mythnew/swap + InstallationDate: Installed on 2016-07-02 (913 days ago) + InstallationMedia: Mythbuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) + IwConfig: + lono wireless extensions. + + enp9s0no wireless extensions. + MachineType: Gigabyte Technology Co., Ltd. B450M S2H + Package: linux (not installed) + ProcFB: 0 amdgpudrmfb + ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/mythnew-root ro verbose drm_kms_helper.edid_firmware=HDMI-A-3:edid/panasonic.edid + ProcVersionSignature: Ubuntu 4.18.0-13.14~18.04.1-generic 4.18.17 + RelatedPackageVersions: + linux-restricted-modules-4.18.0-13-generic N/A + linux-backports-modules-4.18.0-13-generic N/A + linux-firmware 1.173.2 + RfKill: + + Tags: bionic + Uname: Linux 4.18.0-13-generic x86_64 + UpgradeStatus: Upgraded to bionic on 2018-07-27 (158 days ago) + UserGroups: adm cdrom dip lpadmin mythtv nopasswdlogin plugdev sambashare sudo video + _MarkForUpload: True + dmi.bios.date: 12/04/2018 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: F2c + dmi.board.asset.tag: Default string + dmi.board.name: B450M S2H + dmi.board.vendor: Gigabyte Technology Co., Ltd. + dmi.board.version: x.x + dmi.chassis.asset.tag: Default string + dmi.chassis.type: 3 + dmi.chassis.vendor: Default string + dmi.chassis.version: Default string + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF2c:bd12/04/2018:svnGigabyteTechnologyCo.,Ltd.:pnB450MS2H:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB450MS2H:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: + dmi.product.family: Default string + dmi.product.name: B450M S2H + dmi.product.sku: Default string + dmi.product.version: Default string + dmi.sys.vendor: Gigabyte Technology Co., Ltd. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1810239/+attachment/5226193/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1089768] Re: Marvell Sata controller and AMD-Vi problems
This still appears to be an ongoing issue - AMD Athlon 200GE - Gigabyte GA-B450M-S2H board - Marvell 88SE9230 SATA Controller If I boot the HWE 4.18.0-13-generic Kernel I get the errors reported above If I boot with "amd_iommu=off" the drives appear to work correctly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1089768 Title: Marvell Sata controller and AMD-Vi problems To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] Re: amd_iommu conflict with Marvell Sata controller
root@mythfe-amd:~# lspci -knnv -s 01:00.0 01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 11) (prog-if 01 [AHCI 1.0]) Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] Flags: bus master, fast devsel, latency 0, IRQ 56 I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f030 [size=8] I/O ports at f020 [size=4] I/O ports at f000 [size=32] Memory at f7d1 (32-bit, non-prefetchable) [size=2K] Expansion ROM at f7d0 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Legacy Endpoint, MSI 00 Capabilities: [e0] SATA HBA v0.0 Capabilities: [100] Advanced Error Reporting Kernel driver in use: ahci Kernel modules: ahci -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1810239] [NEW] amd_iommu conflict with Marvell Sata controller
Public bug reported: This bug is to confirm that the Marvell 88SE9230 chipset bug presents under AMD's IOMMU implementation with Ubuntu 18.04 and the latest HWE Kernel This has similar characteristics to - https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1089768 System - AMD Athlon 200GE - Gigabyte GA-B450M-S2H board - Marvell 88SE9230 SATA Controller with latest Firmware Kernel - Ubuntu 4.18.0-13.14~18.04.1-generic 4.18.17 If I boot the HWE 4.18.0-13-generic Kernel I get the errors reported above If I boot with "amd_iommu=off" the drives appear to work correctly. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mythfe 1170 F pulseaudio CurrentDesktop: XFCE DistroRelease: Ubuntu 18.04 HibernationDevice: RESUME=/dev/mythnew/swap InstallationDate: Installed on 2016-07-02 (913 days ago) InstallationMedia: Mythbuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IwConfig: lono wireless extensions. enp9s0no wireless extensions. MachineType: Gigabyte Technology Co., Ltd. B450M S2H Package: linux (not installed) ProcFB: 0 amdgpudrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.18.0-13-generic root=/dev/mapper/mythnew-root ro verbose drm_kms_helper.edid_firmware=HDMI-A-3:edid/panasonic.edid ProcVersionSignature: Ubuntu 4.18.0-13.14~18.04.1-generic 4.18.17 RelatedPackageVersions: linux-restricted-modules-4.18.0-13-generic N/A linux-backports-modules-4.18.0-13-generic N/A linux-firmware 1.173.2 RfKill: Tags: bionic Uname: Linux 4.18.0-13-generic x86_64 UpgradeStatus: Upgraded to bionic on 2018-07-27 (158 days ago) UserGroups: adm cdrom dip lpadmin mythtv nopasswdlogin plugdev sambashare sudo video _MarkForUpload: True dmi.bios.date: 12/04/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F2c dmi.board.asset.tag: Default string dmi.board.name: B450M S2H dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF2c:bd12/04/2018:svnGigabyteTechnologyCo.,Ltd.:pnB450MS2H:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB450MS2H:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: B450M S2H dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Tags: apport-collected bionic cosmic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1810239 Title: amd_iommu conflict with Marvell Sata controller To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1810239/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790430] Re: Nonce issues with auth_digest when running behind an reverse proxy
Initial Authentication is occurring at the Apache reverse proxy. This means I can block any requests to Trac or other internal services I'm proxying at the edge. Then Trac has its own auth config - again via Apache on Ubuntu 16.04. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790430 Title: Nonce issues with auth_digest when running behind an reverse proxy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1790430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790430] Re: Nonce issues with auth_digest when running behind an reverse proxy
No the front end / proxy node is running on a RHEL 7.5 server and the back end is on Ubuntu ** Changed in: apache2 (Ubuntu) Status: Expired => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790430 Title: Nonce issues with auth_digest when running behind an reverse proxy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1790430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790430] Re: None issues with auth_digest when running behind an reverse proxy
Sorry correction - Ubuntu 16.04.5 with kernel - 4.4.0-133-generic It looks like the CVE around nonce generation impacts the authentication when behind another Apache instance acting as a reverse proxy. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790430 Title: None issues with auth_digest when running behind an reverse proxy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1790430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790430] [NEW] None issues with auth_digest when running behind an reverse proxy
Public bug reported: Confirmed on Ubuntu 14.04.5 with apache2 2.4.18-2ubuntu3.8 No issues with apache2 2.4.18-2ubuntu3.5 or earlier. I'm running a front end authenticated reverse proxy on Apache The backend is my Trac server and authentication is failing with nonce errors if I upgrade the version of Apache2. Example error in the Apache2 logs when I attempt to authenticate [Mon Sep 03 15:07:30.830824 2018] [auth_digest:error] [pid 2702] [client 192.168.0.8:50650] AH01776: invalid nonce U6R61+50BQA=d41629bfef1e789345f8b147f08f5ad8c89ce973 received - hash is not 72a2ca1b6c6a13fbcd6c0960e21af1a4d7fcbaf8, referer: https://hello.not.here/site/timeline The Apache configuration element for the login URL is as follows AuthType Digest AuthName "Trac" AuthUserFile /var/www/htdigest Require valid-user ** Affects: apache2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790430 Title: None issues with auth_digest when running behind an reverse proxy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1790430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1637073] Re: Intel Xorg Driver and CustomEDID crash
If we re-enable CustomEDID and kill Xorg.conf we see the following error appear during the login process Oct 27 18:30:40 mythfe-1604 audit[30225]: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=30225 comm="Xorg" exe="/usr/lib/xorg/Xorg" sig=6 In addition looking at the Xorg.0.log we can see weird EDID values being reported. [335046.207] (II) intel(0): EDID vendor "U", prod id 1097243512 [335046.207] (II) intel(0): Printing DDC gathered Modelines: [335046.208] (--) intel(0): unexpected EDID version 0.64 [335046.208] (II) intel(0): EDID vendor "<8C>^?", prod id 610150224 [335046.209] (II) DDCModeFromDetailedTiming: Ignoring tiny 0x192 mode [335046.209] (--) intel(0): HDMI max TMDS frequency 225000KHz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1637073 Title: Intel Xorg Driver and CustomEDID crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1637073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1637073] Re: Intel Xorg Driver and CustomEDID crash
Captured the EDID file root@mythfe-1604:~# get-edid > samsung.edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 0 No EDID on bus 1 No EDID on bus 3 No EDID on bus 4 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 8 1 potential busses found: 2 256-byte EDID successfully retrieved from i2c bus 2 Looks like i2c was successful. Have a good day. Validated the EDID Data parse-edid < samsung.edid Checksum Correct Section "Monitor" Identifier "SAMSUNG" ModelName "SAMSUNG" VendorName "SAM" # Monitor Manufactured week 47 of 2009 # EDID version 1.3 # Digital Display DisplaySize 160 90 Gamma 2.20 Option "DPMS" "false" Horizsync 26-81 VertRefresh 24-75 # Maximum pixel clock is 230MHz #Not giving standard mode: 1152x864, 75Hz #Not giving standard mode: 1280x800, 60Hz #Not giving standard mode: 1280x960, 60Hz #Not giving standard mode: 1280x1024, 60Hz #Not giving standard mode: 1440x900, 60Hz #Not giving standard mode: 1440x900, 75Hz #Not giving standard mode: 1680x1050, 60Hz #Not giving standard mode: 1600x1200, 60Hz #Extension block found. Parsing... Modeline"Mode 13" 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync Modeline"Mode 0" 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 1" 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync Modeline"Mode 2" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 4" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync Modeline"Mode 5" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync Modeline"Mode 6" 74.250 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync interlace Modeline"Mode 7" 74.250 1920 2448 2492 2640 1080 1082 1089 1125 +hsync +vsync interlace Modeline"Mode 8" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync Modeline"Mode 9" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync Modeline"Mode 10" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 11" 74.250 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 12" 74.250 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 14" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync Modeline"Mode 15" 74.25 1920 2008 2052 2200 540 542 547 562 +hsync +vsync interlace Modeline"Mode 16" 74.25 1920 2448 2492 2640 540 542 547 562 +hsync +vsync interlace Option "PreferredMode" "Mode 13" EndSection -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1637073 Title: Intel Xorg Driver and CustomEDID crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1637073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1637073] [NEW] Intel Xorg Driver and CustomEDID crash
Public bug reported: Running MythBuntu 16.04.1 on a Gigibyte Brix N3150 with integrated Intel graphics. To avoid the xfce bug from https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1308105 I've previously forced the EDID settings via an xorg.conf file with NVidia graphics. If i use the following xorg.conf file with Intel graphics the mythfe (MythTV Frontend) user can't login. Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "sna" Option "TearFree" "true" Option "CustomEDID" "HDMI3:/etc/X11/samsung.edid" EndSection ** Affects: xfce4-settings (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1637073 Title: Intel Xorg Driver and CustomEDID crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1637073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1637073] Re: Intel Xorg Driver and CustomEDID crash
With the CustomEDID line commented out we can kill Xorg and the mythfe user auto-logins as expected from auth.log Oct 27 18:17:09 mythfe-1604 lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm Oct 27 18:17:10 mythfe-1604 lightdm: pam_unix(lightdm-autologin:session): session opened for user mythfe by (uid=0) Oct 27 18:17:10 mythfe-1604 systemd-logind[776]: New session c61 of user mythfe. Oct 27 18:17:10 mythfe-1604 gnome-keyring-daemon[29205]: couldn't access control socket: /run/user/1000/keyring/control: No such file or directory Oct 27 18:17:11 mythfe-1604 polkitd(authority=local): Registered Authentication Agent for unix-session:c61 (system bus name :1.564 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_NZ.UTF-8) Oct 27 18:17:17 mythfe-1604 pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Oct 27 18:17:17 mythfe-1604 pkexec: pam_systemd(polkit-1:session): Cannot create session: Already running in a session Oct 27 18:17:17 mythfe-1604 pkexec[29305]: mythfe: Executing command [USER=root] [TTY=unknown] [CWD=/home/mythfe] [COMMAND=/usr/lib/update-notifier/package-system-locked] -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1637073 Title: Intel Xorg Driver and CustomEDID crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1637073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1153618] Re: Support Realtek RTS5227 card reader
Appears to still have issues on 15.04 with SDXC Cards Insert vfat formatted card and create a new file. Then eject card. [ 1214.355115] mmc0: cannot verify signal voltage switch [ 1214.467278] mmc0: new ultra high speed SDR104 SDXC card at address 0007 [ 1214.474164] Driver 'mmcblk' needs updating - please use bus_type methods [ 1214.474277] mmcblk0: mmc0:0007 SD64G 58.2 GiB [ 1214.476144] mmcblk0: p1 [ 1224.953923] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1225.053874] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1231.207667] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1235.642101] mmcblk0: timed out sending r/w cmd command, card status 0x400900 [ 1240.232505] mmc0: card 0007 removed Getting the same r/w kernel errors when writing to the card as RHEL7 and Fedora 21. Ejected card is corrupted and needs re-formatting This bug has been confirmed on two Lenovo T440s laptops ** Bug watch added: Red Hat Bugzilla #1242712 https://bugzilla.redhat.com/show_bug.cgi?id=1242712 ** Also affects: linux (Fedora) via https://bugzilla.redhat.com/show_bug.cgi?id=1242712 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1153618 Title: Support Realtek RTS5227 card reader To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1153618/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1153618] Re: Support Realtek RTS5227 card reader
More details on Ubuntu test environment tom@frank:~$ uname -a Linux frank 3.19.0-21-generic #21-Ubuntu SMP Sun Jun 14 18:31:11 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux tom@frank:~$ lspci | grep -i RTS 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1153618 Title: Support Realtek RTS5227 card reader To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1153618/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 459933] Re: wifi disconnects when nm scans (iwlagn - intel 5100 AGN)
** Bug watch added: Red Hat Bugzilla #643211 https://bugzilla.redhat.com/show_bug.cgi?id=643211 ** Also affects: fedora via https://bugzilla.redhat.com/show_bug.cgi?id=643211 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/459933 Title: wifi disconnects when nm scans (iwlagn - intel 5100 AGN) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 453807] Re: nm_vpn_connection_connect_cb(): VPN connection 'xyz' failed to connect: 'No VPN secrets!'.
Same issue here under Karmic with OpenVPN. I'm using TLS with no password. Changing the Type to Password with Certificates (TLS) and a dummy username/password means OpenVPN connections are reliable again. -- nm_vpn_connection_connect_cb(): VPN connection 'xyz' failed to connect: 'No VPN secrets!'. https://bugs.launchpad.net/bugs/453807 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 516684] Re: After upgrade from Karmic boot fails, mountall and udevd fail
Ive hit the same issue upgrading an Ubuntu 8.04 Xen VM to Lucid 10.04. The host is running Centos 5.3 and I have a mix of Centos, Debian and Ubuntu VMs. The Debian VMs upgraded to Lenny without incident but It appears I can't run a paravirt Lucid VM on top of Centos. If I try to boot with a Lucid kernel (2.6.24-21-xen) I get libudev: udev_monitor_new_from_netlink: error getting socket: Invalid argument [0.505931] wait-for-root[761]: segfault at 0030 eip b7edef2b esp bfb99f50 error 4 Segmentation fault chvt: can't open console There appears to be one or more degraded LVM volumes, and your root device may depend on the LVM volumes being online. One or more of the following LVM volumes are degraded: read_urandom: /dev/urandom: open failed: No such file or directory Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) chvt: can't open console ALERT! /dev/disk/by-uuid/87fea4c2-db1f-4743-bab0-da95e5c8e594 does not exist. Dropping to a shell! Anyone had better luck. -- After upgrade from Karmic boot fails, mountall and udevd fail https://bugs.launchpad.net/bugs/516684 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 516684] Re: After upgrade from Karmic boot fails, mountall and udevd fail
Ok upgrading the Xen VM didn't install a Xen compatible kernel and it reverted to older 8.04 kernels. Install linux-image-virtual and I'm now up and working -- After upgrade from Karmic boot fails, mountall and udevd fail https://bugs.launchpad.net/bugs/516684 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 556204] Re: myth-backend started before kernel driver it needs
I'm running 10.04 with the recent 0.23 auto-builds and I have a dual tuner HVR-2200 card. This combination has the same on boot race condition where the dual DVB-T tuners are still initialising after the backend has started and the devices are then missing from the available tuners. Modifying /etc/init/mythtv-backend.conf to contain and started udev- finish as suggested above has resolved the problem. -- myth-backend started before kernel driver it needs https://bugs.launchpad.net/bugs/556204 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554972] Re: Program Guide DST offset is GMT and not Local
Patch has been added under http://svn.mythtv.org/trac/ticket/8217 -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554972 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554971] Re: Program Guide DST offset is GMT and not Local
Please close. Duplicate of 554972. -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554971 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554971] [NEW] Program Guide DST offset is GMT and not Local
Public bug reported: Binary package hint: mythtv It appears that the MythTV Program Guide is using some additional logic to align the EPG data around DST changes but is using GMT rather than local time as the base. This is particularly noticeable in NZ where the schedule was off by an hour until 3pm NZST or 3am GMT today. I have been able to reproduce this problem under MythBuntu 9.10 with MythTV 0.22, and MythBuntu 10.04 Beta and MythTV 0.23. To reproduce from a clean install, install Mythbuntu selecting NZ as your region and then set the local clock back to 9am on Sunday 4th April 2010. Create a dummy Video Source with no grabber, and set the XMLTV offset to AUTO. Create a channel with xmltvid 1036.dvb.guide. Then import the attached XMLTV EPG data. All programs prior to 3pm are incorrectly loaded into the guide. For example Herbie Fully Loaded should start at 1:40pm and has been scheduled for 2:40pm. I have confirmed that this issue wasn't present on an older Knoppmyth environment running MythTV 0.20 with the same EPG data. ** Affects: mythtv (Ubuntu) Importance: Undecided Status: New -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554971 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554971] Re: Program Guide DST offset is GMT and not Local
** Attachment added: 1036.dvb.guide.xml.gz http://launchpadlibrarian.net/43033850/1036.dvb.guide.xml.gz -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554971 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554972] [NEW] Program Guide DST offset is GMT and not Local
Public bug reported: Binary package hint: mythtv It appears that the MythTV Program Guide is using some additional logic to align the EPG data around DST changes but is using GMT rather than local time as the base. This is particularly noticeable in NZ where the schedule was off by an hour until 3pm NZST or 3am GMT today. I have been able to reproduce this problem under MythBuntu 9.10 with MythTV 0.22, and MythBuntu 10.04 Beta and MythTV 0.23. To reproduce from a clean install, install Mythbuntu selecting NZ as your region and then set the local clock back to 9am on Sunday 4th April 2010. Create a dummy Video Source with no grabber, and set the XMLTV offset to AUTO. Create a channel with xmltvid 1036.dvb.guide. Then import the attached XMLTV EPG data. All programs prior to 3pm are incorrectly loaded into the guide. For example Herbie Fully Loaded should start at 1:40pm and has been scheduled for 2:40pm. I have confirmed that this issue wasn't present on an older Knoppmyth environment running MythTV 0.20 with the same EPG data. ** Affects: mythtv (Ubuntu) Importance: Undecided Status: New -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554972 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554972] Re: Program Guide DST offset is GMT and not Local
** Attachment added: 1036.dvb.guide.xml.gz http://launchpadlibrarian.net/43033956/1036.dvb.guide.xml.gz -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554972 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 554972] Re: Program Guide DST offset is GMT and not Local
This ticket has also been lodged in the MythTV Bug Tracker * http://svn.mythtv.org/trac/ticket/8286 ** Bug watch added: mythtv.org bug tracker #8286 http://svn.mythtv.org/trac/ticket/8286 -- Program Guide DST offset is GMT and not Local https://bugs.launchpad.net/bugs/554972 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 481104] Re: mythtranscode doesn't exit on completion
Dave wrote: Disabling Delete files slowly fixes this issue for me. Sadly that then impacts general performance. -- mythtranscode doesn't exit on completion https://bugs.launchpad.net/bugs/481104 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 481104] Re: mythtranscode doesn't exit on completion
It looks like it happens every time judging by the number of mythtranscode processes I could see on the system. A simple kill will force it to exit and doesn't appear to break anything as the actual transcode has finished. -- mythtranscode doesn't exit on completion https://bugs.launchpad.net/bugs/481104 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 469999] Re: Adjusting MythTV GUI size makes XFCE Menu visible
Looking at the display I can confirm that the bottom of the MythTV GUI has been pushed off the screen by the same depth as the XFCE top menu panel. I can also confirm that the menu panel remains present on playback of video even though the video playback should be fullscreen. -- Adjusting MythTV GUI size makes XFCE Menu visible https://bugs.launchpad.net/bugs/46 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 469999] Re: Adjusting MythTV GUI size makes XFCE Menu visible
Re-tested under 0.22.0+fixes22783 and has the same issues. I'm using a virtual machine with an 800x600 display and get the following output in the mythfronend.log 2009-11-12 15:47:54.533 MythUI Image Cache size set to 20971520 bytes 2009-11-12 15:47:54.534 Enabled verbose msgs: important general 2009-11-12 15:47:54.540 Primary screen: 0. 2009-11-12 15:47:54.540 Using screen 0, 800x600 at 0,0 2009-11-12 15:47:54.541 Using theme base resolution of 800x600 2009-11-12 15:47:54.548 LIRC, Error: Failed to connect to Unix socket '/dev/lircd' eno: No such file or directory (2) 2009-11-12 15:47:54.548 JoystickMenuThread Error: Joystick disabled - Failed to read /home/mythfe/.mythtv/joystickmenurc 2009-11-12 15:47:54.693 Using the Qt painter 2009-11-12 15:47:54.721 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml 2009-11-12 15:47:54.924 Loaded base theme from /usr/share/mythtv/themes/default/base.xml 2009-11-12 15:47:54.929 Current MythTV Schema Version (DBSchemaVer): 1244 2009-11-12 15:47:54.933 New DB connection, total: 2 2009-11-12 15:47:54.934 Connected to database 'mythconverg' at host: localhost 2009-11-12 15:47:55.178 Desktop video mode: 800x600 60.3173 Hz -- Adjusting MythTV GUI size makes XFCE Menu visible https://bugs.launchpad.net/bugs/46 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 481104] Re: mythtranscode doesn't exit on completion
Running an strace shows that the process is waiting on something strace -p 20042 Process 20042 attached - interrupt to quit futex(0x9569fb4, FUTEX_WAIT_PRIVATE, 1, NULL -- mythtranscode doesn't exit on completion https://bugs.launchpad.net/bugs/481104 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 481104] [NEW] mythtranscode doesn't exit on completion
Public bug reported: Binary package hint: mythtv-transcode-utils System is running Mythbuntu 9.10 with mythtv-transcode-utils = 0.22.0+fixes22594-0ubuntu1 I'm running a bunch of lossless transcodes on DVB-S MPEG2 captures. The transcode completes but the process doesn't exit which uses up memory and leaves files locked. Output in mythtvbackend.log as follows 2009-11-08 17:08:40.365 JobQueue: Transcode Starting for Go Girls: High Quality (1.9 GB) 2009-11-08 17:08:40.382 transcode: Transcode Starting: Go Girls: High Quality (1.9 GB) 2009-11-08 17:08:43.858 Using runtime prefix = /usr 2009-11-08 17:08:43.863 Using configuration directory = /home/mythtv/.mythtv 2009-11-08 17:08:43.878 Empty LocalHostName. 2009-11-08 17:08:43.883 Using localhost value of mythtv 2009-11-08 17:08:43.974 New DB connection, total: 1 2009-11-08 17:08:43.995 Connected to database 'mythconverg' at host: localhost 2009-11-08 17:08:43.995 Closing DB connection named 'DBManager0' 2009-11-08 17:08:43.996 Connected to database 'mythconverg' at host: localhost 2009-11-08 17:08:43.998 Enabled verbose msgs: important 2009-11-08 17:08:43.999 New DB connection, total: 2 2009-11-08 17:08:44.000 Connected to database 'mythconverg' at host: localhost 2009-11-08 17:08:44.018 Transcoding from /myth/tv/5907_20090514203000.mpg to /myth/tv/5907_20090514203000.mpg.tmp 2009-11-08 17:08:44.078 MythContext: Connecting to backend server: 192.168.0.17:6543 (try 1 of 1) 2009-11-08 17:08:44.083 Using protocol version 50 2009-11-08 17:08:44.084 MainServer::ANN Monitor 2009-11-08 17:08:44.085 adding: mythtv as a client (events: 0) 2009-11-08 17:08:44.086 MainServer::ANN Monitor 2009-11-08 17:08:44.087 adding: mythtv as a client (events: 1) 2009-11-08 17:08:44.238 AFD: Opened codec 0x9627a20, id(MPEG2VIDEO) type(Video) 2009-11-08 17:08:44.239 AFD: codec MP2 has 2 channels 2009-11-08 17:08:44.239 AFD: Opened codec 0x962f8b0, id(MP2) type(Audio) 2009-11-08 17:08:44.252 Honoring the cutlist while transcoding 2009-11-08 17:08:44.260 Cutlist: 0-3048,17785-23799,37633-43525,53764-59897,71044-76693,93301-104808 2009-11-08 17:08:44.260 Original Length: 104808 frames 2009-11-08 17:08:44.261 New Length : 66565 frames 2009-11-08 17:08:44.273 SampleRate: Attempted to add a rate 32000 Hz, which is not in the list of allowed rates. 009-11-08 17:08:44.275 Switching to MPEG-2 transcoder. 2009-11-08 17:08:44.298 Opening /myth/tv/5907_20090514203000.mpg 2009-11-08 17:08:44.309 Input #0, mpegts, from '/myth/tv/5907_20090514203000.mpg': 2009-11-08 17:08:44.309 Duration: 01:09:53.54, start: 77827.738189, bitrate: 3845 kb/s 2009-11-08 17:08:44.311 Stream #0.0[0x204]: Video: mpeg2video, yuv420p, 720x576 [PAR 64:45 DAR 16:9], 15000 kb/s, 25 tbr, 90k tbn, 50 tbc 2009-11-08 17:08:44.311 Stream #0.1[0x244]: Data: 0x0101 2009-11-08 17:08:44.312 Stream #0.2[0x28e]: Audio: mp2, 48000 Hz, 2 channels, s16, 192 kb/s 2009-11-08 17:08:44.313 Stream #0.3[0x3e9]: Data: 0x 2009-11-08 17:08:44.313 Skipping unsupported codec 2 on stream 1 2009-11-08 17:08:44.314 Skipping unsupported codec 2 on stream 3 2009-11-08 17:08:44.318 #0 PTS:21:37:08.359 Delta: 0.0ms queue: 14 2009-11-08 17:08:44.318 #2 PTS:21:37:08.337 Delta: 21.5333ms queue: 2 2009-11-08 17:08:46.136 Converting frame #18 from P to I Mux rate: 15.44 Mbit/s 2009-11-08 17:09:00.885 Converting frame #0 from B to I 2009-11-08 17:09:00.905 Converting frame #1 from B to I 2009-11-08 17:09:05.160 Converting frame #1 from P to I 2009-11-08 17:09:21.234 Converting frame #0 from B to I 2009-11-08 17:09:21.252 Converting frame #1 from B to I 2009-11-08 17:09:23.969 Converting frame #0 from B to I 2009-11-08 17:09:23.988 Converting frame #1 from B to I 2009-11-08 17:09:36.549 Converting frame #0 from B to I 2009-11-08 17:09:36.561 Converting frame #1 from B to I 2009-11-08 17:09:39.757 Converting frame #18 from P to I 2009-11-08 17:09:56.071 Converting frame #0 from B to I 2009-11-08 17:09:56.082 Converting frame #1 from B to I 2009-11-08 17:10:02.874 Converting frame #1 from P to I 2009-11-08 17:10:31.763 Converting frame #0 from B to I 2009-11-08 17:10:31.789 Converting frame #1 from B to I 2009-11-08 17:10:44.565 Converting frame #0 from B to I 2009-11-08 17:10:44.585 Converting frame #1 from B to I 2009-11-08 17:10:44.602 Generating Keyframe Index 2009-11-08 17:10:44.603 Opening /myth/tv/5907_20090514203000.mpg.tmp 2009-11-08 17:10:44.676 Input #0, mpeg, from '/myth/tv/5907_20090514203000.mpg.tmp': 2009-11-08 17:10:44.677 Duration: 00:44:23.48, start: 0.301533, bitrate: 3403 kb/s 2009-11-08 17:10:44.677 Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x576 [PAR 64:45 DAR 16:9], 15000 kb/s, 25 tbr, 90k tbn, 50 tbc 2009-11-08 17:10:44.678 Stream #0.1[0x1c0]: Audio: mp2, 48000 Hz, 2 channels, s16, 192 kb/s 2009-11-08 17:11:33.769 Transcode Completed 2009-11-08 17:11:35.330 Transcoding /myth/tv/5907_20090514203000.mpg done 2009-11-08 17:11:35.385 Error Truncating
[Bug 481104] Re: mythtranscode doesn't exit on completion
Running lsof on the process shows it has the following files locked.
{{{
lsof -p 20042
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
mythtrans 20042 mythtv cwdDIR 8,17 4096 2 /
mythtrans 20042 mythtv rtdDIR 8,17 4096 2 /
mythtrans 20042 mythtv txtREG 8,17 375928 25105
/usr/bin/mythtranscode
mythtrans 20042 mythtv memREG 8,17 659232 25624
/usr/lib/libmythavformat-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 720468 30618
/usr/lib/libmythupnp-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 622240 30611
/usr/lib/libmythdb-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 59264 26407
/usr/lib/libraw1394.so.11.0.1
mythtrans 20042 mythtv memREG 8,17 13680 26419
/usr/lib/librom1394.so.0.3.0
mythtrans 20042 mythtv memREG 8,17 42268 30610
/usr/lib/libmythavutil-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,173177332 25595
/usr/lib/libmyth-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 810700 30614
/usr/lib/libmythlivemedia-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 83608 201767
/lib/libz.so.1.2.3.3
mythtrans 20042 mythtv memREG 8,17 50612 26137
/usr/lib/libiec61883.so.0.1.1
mythtrans 20042 mythtv memREG 8,17 17808 25737
/usr/lib/libavc1394.so.0.3.0
mythtrans 20042 mythtv memREG 8,17 6528 25665
/usr/lib/libXinerama.so.1.0.0
mythtrans 20042 mythtv memREG 8,17 13872 25685
/usr/lib/libXvMC.so.1.0.0
mythtrans 20042 mythtv memREG 8,17 55100 30613
/usr/lib/libmythhdhomerun-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 60024 24750
/usr/lib/libXext.so.6.4.0
mythtrans 20042 mythtv memREG 8,17 17848 25683
/usr/lib/libXv.so.1.0.0
mythtrans 20042 mythtv memREG 8,17 30064 25673
/usr/lib/libXrandr.so.2.2.0
mythtrans 20042 mythtv memREG 8,17 17784 25687
/usr/lib/libXvMCW.so.1.0.0
mythtrans 20042 mythtv memREG 8,17 9736 218634
/lib/tls/i686/cmov/libdl-2.10.1.so
mythtrans 20042 mythtv memREG 8,17 3656 24972
/usr/lib/libvdpau.so.185.18.36
mythtrans 20042 mythtv memREG 8,17 9564 25642
/usr/lib/libXau.so.6.0.0
mythtrans 20042 mythtv memREG 8,17 113320 201611
/lib/ld-2.10.1.so
mythtrans 20042 mythtv memREG 8,171625872 30617
/usr/lib/libmythui-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 552860 30612
/usr/lib/libmythfreemheg-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 513472 25944
/usr/lib/libfreetype.so.6.3.20
mythtrans 20042 mythtv memREG 8,17 257012 25002
/usr/lib/libpulse.so.0.12.0
mythtrans 20042 mythtv memREG 8,17 116920 218645
/lib/tls/i686/cmov/libpthread-2.10.1.so
mythtrans 20042 mythtv memREG 8,17 456380 24818
/usr/lib/libGLU.so.1.3.070600
mythtrans 20042 mythtv memREG 8,17 34412 25551
/usr/lib/libXrender.so.1.3.0
mythtrans 20042 mythtv memREG 8,17 30080 25634
/usr/lib/libSM.so.6.0.0
mythtrans 20042 mythtv memREG 8,17 17880 24754
/usr/lib/libXxf86vm.so.1.0.0
mythtrans 20042 mythtv memREG 8,17 22076 25681
/usr/lib/libXtst.so.6.1.0
mythtrans 20042 mythtv memREG 8,17 4440 25431
/usr/lib/tls/libnvidia-tls.so.185.18.36
mythtrans 20042 mythtv memREG 8,17 16628 25653
/usr/lib/libXdmcp.so.6.0.0
mythtrans 20042 mythtv memREG 8,17 349456 30615
/usr/lib/libmythswscale-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,17 149392 218635
/lib/tls/i686/cmov/libm-2.10.1.so
mythtrans 20042 mythtv memREG 8,17 30960 201762
/lib/libwrap.so.0.7.6
mythtrans 20042 mythtv memREG 8,17 11124932 30616
/usr/lib/libmythtv-0.22.so.0.22.0
mythtrans 20042 mythtv memREG 8,172296612 25609
/usr/lib/libQtCore.so.4.5.2
mythtrans 20042 mythtv memREG 8,17 267156 24943
/usr/lib/libmp3lame.so.0.0.0
mythtrans 20042 mythtv memREG 8,17 13988 206502
/lib/libuuid.so.1.3.0
mythtrans 20042 mythtv memREG 8,17 9540 211719
/usr/lib/gconv/UTF-16.so
mythtrans 20042 mythtv memREG 8,17 962800 24273
/usr/lib/libstdc++.so.6.0.13
mythtrans 20042 mythtv memREG 8,17 76052 26149
/usr/lib/libjack.so.0.0.28
mythtrans 20042 mythtv memREG 8,17 120380 26571
/usr/lib/libxcb.so.1.1.0
mythtrans 20042 mythtv memREG 8,17 247788 24606
/usr/lib/libgobject-2.0.so.0.2200.2
mythtrans 20042 mythtv memREG 8,17 71116 25788
/usr/lib/libcelt.so.0.0.0
mythtrans 20042 mythtv memREG 8,17 79676 218637
/lib/tls/i686/cmov/libnsl-2.10.1.so
mythtrans 20042 mythtv memREG
[Bug 240336] Re: Microsoft Remote Back Button not mapped
On our myPVR environment we map the Back key to Esc as suggested by the bug reporter See http://support.openmedia.co.nz/mypvr/support/remote-control-and- custom-key-mappings/ for more details. The code we use is. begin remote = mceusb prog = mythtv button = Back config = Escape repeat = 0 delay = 0 end -- Microsoft Remote Back Button not mapped https://bugs.launchpad.net/bugs/240336 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 472131] [NEW] Incorrect mapping of Record action for mceusb remotes
Public bug reported: Binary package hint: mythbuntu-lirc-generator You are mapping RecTV to the key R rather than the Rec button begin remote = mceusb prog = mythtv button = RecTV config = R repeat = 0 delay = 0 end The generated lirc file should have begin remote = mceusb prog = mythtv button = Record config = R repeat = 0 delay = 0 end ** Affects: mythbuntu-lirc-generator (Ubuntu) Importance: Undecided Status: New -- Incorrect mapping of Record action for mceusb remotes https://bugs.launchpad.net/bugs/472131 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 472131] Re: Incorrect mapping of Record action for mceusb remotes
Additional suggestion for mplayer is to map the information key to the OSD begin remote = mceusb button = More prog = mplayer config = osd repeat = 0 delay = 0 end -- Incorrect mapping of Record action for mceusb remotes https://bugs.launchpad.net/bugs/472131 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 469999] [NEW] Adjusting MythTV GUI size makes XFCE Menu visible
Public bug reported: Binary package hint: mythtv-frontend If you adjust the GUI Offset or size of the mythfrontend then the XFCE menu is always visible, including when playing back video. To reproduce navigate the following menus Utilties/Setup - Settings - Appearance - Next Now adjust the GUI X Offset, save your settings, and restart the MythTV Frontend application. ProblemType: Bug Architecture: i386 Date: Mon Nov 2 16:55:31 2009 DistroRelease: Ubuntu 9.10 Package: mythtv-frontend 0.22.0+fixes22594-0ubuntu1 ProcEnviron: LANG=en_NZ.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: mythtv Uname: Linux 2.6.31-14-generic i686 XsessionErrors: (polkit-gnome-authentication-agent-1:1738): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (xfce4-terminal:1881): Terminal-WARNING **: Unable to load terminal preferences. ** Affects: mythtv (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- Adjusting MythTV GUI size makes XFCE Menu visible https://bugs.launchpad.net/bugs/46 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 469999] Re: Adjusting MythTV GUI size makes XFCE Menu visible
** Attachment added: .var.log.mythtv.mythbackend.log.txt http://launchpadlibrarian.net/34923459/.var.log.mythtv.mythbackend.log.txt ** Attachment added: .var.log.mythtv.mythfrontend.log.txt http://launchpadlibrarian.net/34923460/.var.log.mythtv.mythfrontend.log.txt ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/34923461/Dependencies.txt ** Attachment added: MythTVDirectoryPermissions.txt http://launchpadlibrarian.net/34923463/MythTVDirectoryPermissions.txt -- Adjusting MythTV GUI size makes XFCE Menu visible https://bugs.launchpad.net/bugs/46 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 469999] Re: Adjusting MythTV GUI size makes XFCE Menu visible
It looks like the actual MythTV Frontend screen has been offset by XFCE. If after restarting the frontend application you start up the Screen Setup Wizard the base starting point is below the XFCE menu. Enabling Autohide in the XFCE panel settings will fix this, but it doesn't feel like it is the correct solution, especially if you are only trying to adjust the width of the GUI due to overscan. -- Adjusting MythTV GUI size makes XFCE Menu visible https://bugs.launchpad.net/bugs/46 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 314530] Re: APIC error on CPU0: 40(40)
Same issue with an Aspire 3000 running Jaunty with an AMD Sempron 2800+ CPU. ** Attachment added: dmidecode.txt http://launchpadlibrarian.net/32541973/dmidecode.txt -- APIC error on CPU0: 40(40) https://bugs.launchpad.net/bugs/314530 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 430595] [NEW] scan from dvb-apps fails when using diseqc commands
Public bug reported: Platform is Ubuntu Jaunty or Mythbuntu Jaunty dvb-apps - 1.1.1+rev1207-4 When using the scan command to interrogate multiple LNBs connected via a diseqc switch the scan fails. A clean copy of the source from linuxtv.org works as expected - linuxtv- dvb-apps-1.1.1.tar.gz Usind the following scan file D2.aurora # Optus Aurora Transponder on Optus D2 satellite # freq pol sr fec S 12407000 V 3000 AUTO S 12448000 V 2780 AUTO The Optus D2 LNB is connected via port 4 on the LNB which is selected via -s 3 /usr/bin/scan -5 -l 11300 -s 3 D2.aurora scanning D2.aurora using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12407000 V 3000 9 initial transponder 12448000 V 2780 9 tune to: 12407:v:3:3 DVB-S IF freq is 1107000 WARNING: tuning failed!!! tune to: 12407:v:3:3 (tuning failed) DVB-S IF freq is 1107000 WARNING: tuning failed!!! tune to: 12448:v:3:27800 DVB-S IF freq is 1148000 WARNING: tuning failed!!! tune to: 12448:v:3:27800 (tuning failed) DVB-S IF freq is 1148000 WARNING: tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Running the same scan via a clean build off the vanilla source works as expected ~/src/linuxtv-dvb-apps-1.1.1/util/scan/scan -5 -l 11300 -s 3 D2.aurora scanning D2.aurora using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12407000 V 3000 9 initial transponder 12448000 V 2780 9 tune to: 12407:v:3:3 0x 0x012d: pmt_pid 0x0020 OP -- INFO 156�E (running) 0x 0x012e: pmt_pid 0x0020 OP -- SBS SE (running, scrambled) 0x 0x012f: pmt_pid 0x0020 OP -- SBS WA (running, scrambled) 0x 0x0130: pmt_pid 0x0020 OP -- BTV1 (running, scrambled) 0x 0x0131: pmt_pid 0x0020 OP -- . (running) 0x 0x0132: pmt_pid 0x0020 OP -- . (running) 0x 0x0133: pmt_pid 0x0020 OP -- 7 Central (running, scrambled) 0x 0x0134: pmt_pid 0x0020 OP -- . (running) 0x 0x0135: pmt_pid 0x0020 OP -- SBS QLD (running, scrambled) 0x 0x0136: pmt_pid 0x0020 OP -- . (running) 0x 0x0137: pmt_pid 0x0020 OP -- . (running) 0x 0x0138: pmt_pid 0x0020 OP -- . (running) ** Affects: linuxtv-dvb-apps (Ubuntu) Importance: Undecided Status: New -- scan from dvb-apps fails when using diseqc commands https://bugs.launchpad.net/bugs/430595 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 430595] Re: scan from dvb-apps fails when using diseqc commands
Re-running with verbose output /usr/bin/scan -5 -verbose -l 11300 -s 3 D2.aurora scanning D2.aurora using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12407000 V 3000 9 initial transponder 12448000 V 2780 9 tune to: 12407:v:3:3 DVB-S IF freq is 1107000 tuning status == 0x00 tuning status == 0x00 tuning status == 0x00 tuning status == 0x00 ~/src/linuxtv-dvb-apps-1.1.1/util/scan/scan -5 -verbose -l 11300 -s 3 D2.aurora 21 scanning D2.aurora using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12407000 V 3000 9 initial transponder 12448000 V 2780 9 tune to: 12407:v:3:3 DiSEqC: switch pos 3, 13V, loband (index 12) tuning status == 0x1f PAT PMT 0x0020 for service 0x0130 PMT 0x0020 for service 0x0138 PMT 0x0020 for service 0x0140 PMT 0x0020 for service 0x0143 PMT 0x0020 for service 0x0146 PMT 0x0020 for service 0x012d Looks like the DiSEqC command hasn't been sent. -- scan from dvb-apps fails when using diseqc commands https://bugs.launchpad.net/bugs/430595 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 430595] Re: scan from dvb-apps fails when using diseqc commands
Issue relates to changes in util/scan.c that won't allow a diseqc change
unless high and switch values are provided when using a custom LNB type
The following command will work with a diseqc
/usr/bin/scan -5 -l 11300,11300,11300 -s 3 D2.aurora
The following logic is incorrect as it is possible to use a monopoint
LNB via a DiSEqc
if (lnb_type.high_val) {
if (lnb_type.switch_val) {
/* Voltage-controlled switch */
int hiband = 0;
if (p.frequency = lnb_type.switch_val)
hiband = 1;
setup_switch (frontend_fd,
switch_pos,
t-polarisation ==
POLARISATION_VERTICAL ? 0 : 1,
hiband);
usleep(5);
if (hiband)
p.frequency = abs(p.frequency -
lnb_type.high_val);
else
p.frequency = abs(p.frequency -
lnb_type.low_val);
} else {
/* C-Band Multipoint LNBf */
p.frequency = abs(p.frequency -
(t-polarisation == POLARISATION_VERTICAL ?
lnb_type.low_val:
lnb_type.high_val));
}
} else {
/* Monopoint LNBf without switch */
p.frequency = abs(p.frequency - lnb_type.low_val);
}
--
scan from dvb-apps fails when using diseqc commands
https://bugs.launchpad.net/bugs/430595
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 430595] Re: scan from dvb-apps fails when using diseqc commands
Confirmed problem exists in upstream mercurial repository. I'll raise a bug report upstream. -- scan from dvb-apps fails when using diseqc commands https://bugs.launchpad.net/bugs/430595 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 351017] Re: [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures.
Ok something a bit odd here. I removed mjpegtools and then re-installed. This picked up mjpegtools_1.9.0-0.0ubuntu3_i386.deb again but now it appears to work. -- [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures. https://bugs.launchpad.net/bugs/351017 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 351017] Re: [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures.
How long should this take to appear in the repository? -- [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures. https://bugs.launchpad.net/bugs/351017 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 351017] Re: [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures.
Currently the most recent version in the repository is mjpegtools_1.9.0-0.0ubuntu3_i386.deb This also shows up if you enable the jaunty-proposed repository I've tried with this update and it still has the same Illegal instruction when processing samples. -- [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures. https://bugs.launchpad.net/bugs/351017 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 351017] Re: [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures.
This has been released into Karmic, but there has been no fix for Jaunty users. As this is a bug impacting a lot of Athlon users will there be a fix released for Jaunty? -- [SRU] mpeg2enc crashes with SIGILL on non-p4 architectures. https://bugs.launchpad.net/bugs/351017 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 349255] Re: Green webcam capture on isight
I'm seeing the same issues on my macbook since an update from 8.10 If I change the settings in gstreamer-properties and test everything works, but I can't make the changes sticky. Video is always green in skype and cheese. -- Green webcam capture on isight https://bugs.launchpad.net/bugs/349255 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 344743] Re: X Problems In MythTV on Jaunty
*** This bug is a duplicate of bug 341898 *** https://bugs.launchpad.net/bugs/341898 I have the same issues with a clean 9.04 beta install under VMWare Fusion 2.04 I've tried the vesa and vmware video drivers, as well as trying to use the QT mode and always get the same results. -- X Problems In MythTV on Jaunty https://bugs.launchpad.net/bugs/344743 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285305] Re: vmmouse doesn't work with input hotplug
Same problems with VMWare Fusion and vmmouse_drv.so. Can confirm update in proposed resolves the mouse problems. -- vmmouse doesn't work with input hotplug https://bugs.launchpad.net/bugs/285305 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 204578] Ubuntu 8.04 with kernel 2.6.14-19-gereric
On Wed, June 25, 2008 3:21 am, Armin Barth wrote: Hi Markus, how can I use the em28xx-module with kernel 2.6.24-19-generic. Have a look at the tips I provide at http://www.mythtv.co.nz/mythtv/2008/06/08/hauppauge-hvr-900-tuner-and-ubuntu-hardy/ The existing modules should just work if you follow my guide. Steven Ellis - Technical Director OpenMedia Limited - The Home of myPVR email - [EMAIL PROTECTED] website - http://www.openmedia.co.nz -- 2.6.24.12 won't boot with em28xx device https://bugs.launchpad.net/bugs/204578 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218126] Re: xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785'
I've just upgraded the kernel in my Xen hardy guest to linux-image-2.6.24-19-xen_2.6.24-19.33_i386.deb I don't currently appear to have the network issues, although I haven't put a high network load on the image yet. It booted cleanly with none of the usual issues. -- xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785' https://bugs.launchpad.net/bugs/218126 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218126] Re: xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785'
Just tried with the updated kernel 2.6.24-18-xen and still have the same issues with a crash at netfront.c:855. Centos 5.1 Dom0 running xen-3.0.3-41.el5_1.5 Full boot and crash output below [0.00] Linux version 2.6.24-18-xen ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 29 00:39:30 UTC 2008 (Ubuntu 2.6.24-4.6-generic) [0.00] Reserving virtual address space above 0xf580 [0.00] BIOS-provided physical RAM map: [0.00] Xen: - 09e0 (usable) [0.00] 0MB HIGHMEM available. [0.00] 158MB LOWMEM available. [1226229.780011] Zone PFN ranges: [1226229.780014] DMA 0 - 4096 [1226229.780018] Normal 4096 -40448 [1226229.780020] HighMem 40448 -40448 [1226229.780022] Movable zone start PFN for each node [1226229.780025] early_node_map[1] active PFN ranges [1226229.780027] 0:0 -40448 [1226229.788921] ACPI in unprivileged domain disabled [1226229.788940] Allocating PCI resources starting at 1000 (gap: 09e0:f620) [1226229.789057] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40132 [1226229.789065] Kernel command line: root=/dev/sda2 ro root=UUID=87fea4c2-db1f-4743-bab0-da95e5c8e594 ro xencons=tty single [1226229.789400] Enabling fast FPU save and restore... done. [1226229.789409] Enabling unmasked SIMD FPU exception support... done. [1226229.789414] Initializing CPU#0 [1226229.789643] PID hash table entries: 1024 (order: 10, 4096 bytes) [1226229.789689] Xen reported: 1665.028 MHz processor. [0.104278] console [tty0] enabled [0.104498] Console: colour dummy device 80x25 [0.104715] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [0.104996] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [0.105077] Software IO TLB disabled [0.105087] vmalloc area: ca80-f53fe000, maxmem 2d80 [0.110360] Memory: 129472k/161792k available (2225k kernel code, 23988k reserved, 1010k data, 212k init, 0k highmem) [0.110400] virtual kernel memory layout: [0.110401] fixmap : 0xf568d000 - 0xf57ff000 (1480 kB) [0.110403] pkmap : 0xf540 - 0xf560 (2048 kB) [0.110405] vmalloc : 0xca80 - 0xf53fe000 ( 683 MB) [0.110406] lowmem : 0xc000 - 0xc9e0 ( 158 MB) [0.110408] .init : 0xc042f000 - 0xc0464000 ( 212 kB) [0.110409] .data : 0xc032c481 - 0xc0428d04 (1010 kB) [0.110411] .text : 0xc010 - 0xc032c481 (2225 kB) [0.110424] Checking if this processor honours the WP bit even in supervisor mode... Ok. [0.177796] Calibrating delay using timer specific routine.. 3332.30 BogoMIPS (lpj=6664617) [0.177933] Security Framework initialized [0.177945] SELinux: Disabled at boot. [0.177958] AppArmor: AppArmor initialized [0.177966] Failure registering capabilities with primary security module. [0.177998] Mount-cache hash table entries: 512 [0.178248] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [0.178253] CPU: L2 Cache: 256K (64 bytes/line) [0.178273] Compat vDSO mapped to f57fe000. [0.178287] Checking 'hlt' instruction... OK. [0.178638] SMP alternatives: switching to UP code [0.179295] Freeing SMP alternatives: 11k freed [0.179489] Early unpacking initramfs... done [0.246524] Brought up 1 CPUs [0.247612] net_namespace: 64 bytes [0.247626] failed to set up cpufreq notifier [0.265400] Time: 165:165:165 Date: 165/165/65 [0.265470] NET: Registered protocol family 16 [0.266595] Brought up 1 CPUs [0.266619] PCI: Fatal: No config space access function found [0.266624] PCI: setting up Xen PCI frontend stub [0.267685] ACPI: Interpreter disabled. [0.267697] Linux Plug and Play Support v0.97 (c) Adam Belay [0.267750] pnp: PnP ACPI: disabled [0.267895] xen_mem: Initialising balloon driver. [0.268793] Setting mem allocation to 153600 kiB [0.269308] PCI: System does not support PCI [0.269314] PCI: System does not support PCI [0.270892] NET: Registered protocol family 8 [0.270898] NET: Registered protocol family 20 [0.271038] AppArmor: AppArmor Filesystem Enabled [0.271732] NET: Registered protocol family 2 [0.274773] Time: xen clocksource has been installed. [0.306875] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [0.307219] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [0.307358] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [0.307492] TCP: Hash tables configured (established 8192 bind 8192) [0.307498] TCP reno registered [0.318967] checking if image is initramfs... it is [0.423381] Freeing initrd memory: 17836k freed [0.424296] audit: initializing netlink socket (disabled) [0.424351] audit(1212547892.753:1): initialized [0.424705] VFS: Disk quotas dquot_6.5.1 [
[Bug 218126] Re: xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785'
I've just booted the same guest with the 2.6.24-19-xen kernel from http://www.il.is.s.u-tokyo.ac.jp/~hiranotaka/ without issue or crash. I need to stress test the Xen guest a bit but it appears to have resolved the netfront:855 issue Can anyone provide detail on what has been patched in this kernel compared with the Ubuntu supplied one? -- xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785' https://bugs.launchpad.net/bugs/218126 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218126] Re: xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785'
Ok not looking that good with the xen kernel from http://www.il.is.s.u-tokyo.ac.jp/~hiranotaka/ [ 322.044307] logwatch[3122] general protection eip:b7ebd13c esp:bfb9a774 error:0 [ 542.537078] apache2[3167] general protection eip:b7ea08ab esp:bfeadaa4 error:0 [ 580.412190] logwatch[3175] general protection eip:b7ea813c esp:bfba6a84 error:0 There appears to be a conflict with the version of libc6-xen as if I move /lib/tls to /lib/tls/disabled.new then these apps start working correctly. -- xen guest kernel bug: 'kernel BUG at /build/buildd/linux-2.6.24/debian/build/custom-source-xen/drivers/xen/netfront/netfront.c:785' https://bugs.launchpad.net/bugs/218126 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 204578] Re: 2.6.24.12 won't boot with em28xx device
Got it working on 2.6.24-17-generic with my HVR900 but I had to clean up
some old conflicting kernel modules
# First backup the existing kernel modules
cd /lib/modules/2.6.24-17-generic
tar -zcf 2.6.24-17-generic.bak.tgz 2.6.24-17-generic
# Then copy over the empia driver from 2.6.24-16-generic
cp -a /lib/modules/2.6.24-16-generic/empia /lib/modules/2.6.24-17-generic
# Then delete any conflicting packages
cd /lib/modules/2.6.24-17-generic/kernel
ls /lib/modules/2.6.24-17-generic/empia/ | while read i; do find . -name $i
-exec rm -f {} \; ; done
Now DVB and analogue both work
--
2.6.24.12 won't boot with em28xx device
https://bugs.launchpad.net/bugs/204578
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
