Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
Got it Seems that before configuring the USB stick I have to disable the built in WiFi and reboot, then configure the USB. Doing this way and rebooting the Rpi3 every time it is asked and avoiding cumulate changes before rebooting, the USB WiFi stick now works. This Edimax 7811utc is great! Now I can connect to the nwtwork and play high resolution files, even 384 KHz\24 bit without any audible pops!!! (of course I had to enable the TURBO mode). GREAT ! steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
kidstypike wrote: > Your question has stirred my tiny malformed maggot sized brain into > action :( > > I am using this setup (top line of my signature) purely as a LMS > server/controller for all my other players. I now see that if I start > squeezelite on this setup and control that, I *do* indeed see the VU > meters :) > > So are you saying that I can only see/use the VU meters when I control > the only player I have no intention of ever using? I fell for it when I first tested the VU meters. I also only use my screen setup as a controller for other players. :) Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
kidstypike wrote: > oops, sorry, you'll have to share the prize . . I'm not made of money :( lol :) *Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer x3,Wandboard *Server:* LMS Version: 7.9.1 - 1503129892 on Centos 7 VM on ESXi 6.5.0U1 on Dell T320 *Plugins:* AutoRescan/BBCiPlayer/PowerSave/PowerSwitchIII/Squeezecloud *Remotes:* iPeng8/Orangesqueeze/PC/Jivelite *Music:* 383GB,1269 albums 17756 songs 4381 artists mostly FLACs *Want a webapp ?* See http://forums.slimdevices.com/showthread.php?104305-Webapp-for-LMS Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
d6jg wrote: > I think I suggested that workaround which does work. > I have a hacked O2 Joggler with the VU Screen on it and use it as a > control point for a pair of Pi's - all three are synced. > The only issue is that the Joggler needs to be connected to my amp on an > unused input otherwise it outputs sound via its inbuilt speaker. This > issue wouldn't apply to a Pi + Touchscreen. Oops, sorry, you'll have to share the prize . . I'm not made of money :( *Server* - LMS 7.9.1 > Raspberry Pi3/piCorePlayer 3.21/jivelite, 25K library on WDMyCloud, cache and playlists on a USB stick (formatted ntfs). *Lounge* - RPi 2/Max2Play>HiFiBerry DIGI+>AudioEngine DAC1>AVI DM5 *Study* - RPi 3/piCorePlayer 3.21>HiFiBerry DAC+>CA Minx 5 *Dining Room* - Boom *Garage* - Radio *In car* - LMS 7.9.1 > RPi3/Max2Play/Access Point plugin > HiFiBerry DAC+ > car's hifi (files on a 2TB portable USB drive) *Spares* - 1xTouch, 1xSB3 kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
Jeff07971 wrote: > Yes I'm afraid so VU meters are only for the local squeezelite player > > There is a workaround sync the local player to the player you are > controlling (not my idea I saw it in the forum) I think I suggested that workaround which does work. I have a hacked O2 Joggler with the VU Screen on it and use it as a control point for a pair of Pi's - all three are synced. The only issue is that the Joggler needs to be connected to my amp on an unused input otherwise it outputs sound via its inbuilt speaker. This issue wouldn't apply to a Pi + Touchscreen. *Pi3 with piCoreplayer music on QNAP TS419p via NFS* iThingys/iPeng/Tablets/Jogglers *Living Room* - Joggler & SB3 -> Onkyo TS606 - > Celestion Ditton F20s *Office* - Pi -> Sony TA FE320 -> Celestion F10s / Pi & SB3 -> Onkyo CRN 755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - SB Touch -> Topping TP21 -> AKG Headphones d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
Jeff07971 wrote: > Yes I'm afraid so VU meters are only for the local squeezelite player > > There is a workaround sync the local player to the player you are > controlling (not my idea I saw it in the forum) Clever! Thanks, you have hit the bulls-eye, rung the bell, and are entitled to a goldfish, cigar or coconut according to choice :) *Server* - LMS 7.9.1 > Raspberry Pi3/piCorePlayer 3.21/jivelite, 25K library on WDMyCloud, cache and playlists on a USB stick (formatted ntfs). *Lounge* - RPi 2/Max2Play>HiFiBerry DIGI+>AudioEngine DAC1>AVI DM5 *Study* - RPi 3/piCorePlayer 3.21>HiFiBerry DAC+>CA Minx 5 *Dining Room* - Boom *Garage* - Radio *In car* - LMS 7.9.1 > RPi3/Max2Play/Access Point plugin > HiFiBerry DAC+ > car's hifi (files on a 2TB portable USB drive) *Spares* - 1xTouch, 1xSB3 kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
kidstypike wrote: > Your question has stirred my tiny malformed maggot sized brain into > action :( > > I am using this setup (top line of my signature) purely as a LMS > server/controller for all my other players. I now see that if I start > squeezelite on this setup and control that, I *do* indeed see the VU > meters :) > > So are you saying that I can only see/use the VU meters when I control > the only player I have no intention of ever using? Yes I'm afraid so VU meters are only for the local squeezelite player *Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer x3,Wandboard *Server:* LMS Version: 7.9.1 - 1503129892 on Centos 7 VM on ESXi 6.5.0U1 on Dell T320 *Plugins:* AutoRescan/BBCiPlayer/PowerSave/PowerSwitchIII/Squeezecloud *Remotes:* iPeng8/Orangesqueeze/PC/Jivelite *Music:* 383GB,1269 albums 17756 songs 4381 artists mostly FLACs *Want a webapp ?* See http://forums.slimdevices.com/showthread.php?104305-Webapp-for-LMS Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
Greg Erskine wrote: > Do you have the right player selected? Your question has stirred my tiny malformed maggot sized brain into action :( I am using this setup (top line of my signature) purely as a LMS server/controller for all my other players. I now see that if I start squeezelite on this setup and control that, I *do* indeed see the VU meters :) So are you saying that I can only see/use the VU meters when I control the only player I have no intention of ever using? *Server* - LMS 7.9.1 > Raspberry Pi3/piCorePlayer 3.21/jivelite, 25K library on WDMyCloud, cache and playlists on a USB stick (formatted ntfs). *Lounge* - RPi 2/Max2Play>HiFiBerry DIGI+>AudioEngine DAC1>AVI DM5 *Study* - RPi 3/piCorePlayer 3.21>HiFiBerry DAC+>CA Minx 5 *Dining Room* - Boom *Garage* - Radio *In car* - LMS 7.9.1 > RPi3/Max2Play/Access Point plugin > HiFiBerry DAC+ > car's hifi (files on a 2TB portable USB drive) *Spares* - 1xTouch, 1xSB3 kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
kidstypike wrote: > No dice, scrolling through the different "now playing" views I get: > > Artwork and Text > Large Artwork and Text > Artwork Only > Text only. Do you have the right player selected? Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
There a multiple layers to this issue. You have to remember piCore is a extremely small embedded Linux in RAM. This means every time you reboot, unlike normal Linux installations, you get a brand new, fresh Linux install from source. Also, what installs into RAM depends on what options you have selected. For example, if you aren't using wifi, the wifi extensions will not be loaded. When you have enabled wifi, the extensions are loaded during the boot process. If you disable wifi, the wifi extensions are still loaded in memory until the next boot. So, by default, this means when you delete an extension in piCore, it marks the extension and its dependencies to not load during the boot process, it doesn't delete them dynamically. We occasionally, change this default behavior but it sometimes causes us grief. If the option you selected modifies the Raspberry Pi configuration file it usually is not activated until the next boot. If the option you selected is an squeezelite option, then restarting squeezelite is usually is sufficient. You also need to assume that hot swapping USB devices doesn't work. As far as networking is concerned, squeezelite will use wired ethernet over wifi, so if you happen to have both activated squeezelite will used wired Ethernet but you can use either for the web interface. Remember when playing around the IP address usually changes goes from wired to wifi. When the reboot screen pops up in piCorePlayer it usually means a backup has been done and a reboot is required to activate the change. If you are doing multiple changes and know what you are doing, you can delay the reboot until the next option has been set. Rebooting will then activate both changes. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
steff wrote: > Maybe in the piCore there are commands that must be executed in the > proper way... let me say... save here, no reboot, save there reboot... > is not good... but we must do save here, reboot, save there, reboot... You may have a point there, I remember having something like this problem but a long time ago now. I think its best that if the Pi says reboot you do, it dosent take very long *Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer x3,Wandboard *Server:* LMS Version: 7.9.1 - 1503129892 on Centos 7 VM on ESXi 6.5.0U1 on Dell T320 *Plugins:* AutoRescan/BBCiPlayer/PowerSave/PowerSwitchIII/Squeezecloud *Remotes:* iPeng8/Orangesqueeze/PC/Jivelite *Music:* 383GB,1269 albums 17756 songs 4381 artists mostly FLACs *Want a webapp ?* See http://forums.slimdevices.com/showthread.php?104305-Webapp-for-LMS Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
Jeff07971 wrote: > Did you hit "Save/Connect" after setting Built in wifi off ? SURE It seems that there is something not very clear to me aroud networking. In the past I worked hours on another annoying problem: using the embedded WiFi, it was working only if the Eth wired was connected at the same time... having the wired connected, then the WiFi was OK (useless), unplugging the wired (and rebooted), the WiFI stopped. It is solved but I really do not understand why. and,.. I am playing aroud Reasperries since the very beginning. Maybe in the piCore there are commands that must be executed in the proper way... let me say... save here, no reboot, save there reboot... is not good... but we must do save here, reboot, save there, reboot... steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
steff wrote: > need your help. > Since I was looking for a better WiFi than the Rpi3 built-in WiFi, I > just got the very same adapter... the 7811utc. > I tested it in advance on a PC and it work very well, then i connected > it to the Rpi3 > According to the messages on the console, it is recognized, but... I > can not ave it working. > > Try to explain: in the piCore config web page for the WiFi, there are > two main switches: WiFi on\off and Rpi3 embedded WiFi on\off. > I switch the poor embedded off, reboot, then the Rpi3 connects to the > WiFi AGAIN with the ebedded. > Seems that the on\off switch for the embedded takes no effect at all and > moreover the Edimax does not want to connect. > > Can you help me, please? Did you hit "Save/Connect" after setting Built in wifi off ? *Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezePlayer,PiCorePlayer x3,Wandboard *Server:* LMS Version: 7.9.1 - 1503129892 on Centos 7 VM on ESXi 6.5.0U1 on Dell T320 *Plugins:* AutoRescan/BBCiPlayer/PowerSave/PowerSwitchIII/Squeezecloud *Remotes:* iPeng8/Orangesqueeze/PC/Jivelite *Music:* 383GB,1269 albums 17756 songs 4381 artists mostly FLACs *Want a webapp ?* See http://forums.slimdevices.com/showthread.php?104305-Webapp-for-LMS Jeff07971's Profile: http://forums.slimdevices.com/member.php?userid=49290 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
paul- wrote: > Sorry I didn't see this but the Edimax EW-7811UTC AC600 is supported in > pCP. I use this adapter. My router is an Netgear Nighthawk x4s r7800 > whichi is AC2600 > need your help. Since I was looking for a better WiFi than the Rpi3 built-in WiFi, I just got the very same adapter... the 7811utc. I tested it in advance on a PC and it work very well, then i connected it to the Rpi3 According to the messages on the console, it is recognized, but... I can not ave it working. Try to explain: in the piCore config web page for the WiFi, there are two main switches: WiFi on\off and Rpi3 embedded WiFi on\off. I switch the poor embedded off, reboot, then the Rpi3 connects to the WiFi AGAIN with the ebedded. Seems that the on\off switch for the embedded takes no effect at all and moreover the Edimax does not want to connect. Can you help me, please? steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] picoreplayer without network
Hm, perhaps providing decent wifi at the pool is also a solution? I use my phone with a set bt speakers when I'm outside *SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom) *Server:* LMS on Pi3 7.9.1. on PcP 3.21 *Network:* AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity edwin2006's Profile: http://forums.slimdevices.com/member.php?userid=66926 View this thread: http://forums.slimdevices.com/showthread.php?t=107995 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > Using a 3rd partition on mmcblk0 is not supported in the web interface. > Do it manually, make sure LMS is not running when you move it. You > will also need to look at the file. > > /home/tc/.slimserver.cfg > > And update that file with the appropriate locations. Thanks, Paul. When I change that manually: - Can you give an example on what needs to be entered / changed in /home/tc/.slimserver.cfg? Right now, the only entry I have in that file is: OPTIONS="--nomysqueezebox" - What files / folders do I need to move to the new location? These (as listed in server settings - information) or additional ones: Zwischenspeicher-Ordner /usr/local/slimserver/Cache Ordner für Einstellungen /usr/local/slimserver/prefs Ordner für Extras /usr/local/slimserver/Cache/InstalledPlugins/Plugins, /usr/local/slimserver/Plugins slimhase's Profile: http://forums.slimdevices.com/member.php?userid=31958 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
paul- wrote: > Can you see them if you rotate through them? If none of the VU meters > are showing, you will need to reset jivelite. Press the reset button in > the jivelite section on the tweaks page. > > This can happen if you setup jivelite when on a wired connection, then > change to wireless. No dice, scrolling through the different "now playing" views I get: Artwork and Text Large Artwork and Text Artwork Only Text only 23681 The VU meters are downloaded and visible in the dropdown on the tweaks/jivelite section: 23682 23683 RPi is wired, never used wireless. Have restarted LMS and rebooted many times. +---+ |Filename: pic19-09-2017-08.01.57.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=23683| +---+ *Server* - LMS 7.9.1 > Raspberry Pi3/piCorePlayer 3.21, 25K library, cache and playlists on a USB HD (formatted ntfs). *Lounge* - RPi 2/Max2Play > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5 *Study* - RPi 3/piCorePlayer 3.21 > HiFiBerry DAC+ > CA Minx 5 *Dining Room* - Boom *Garage* - RPi3/piCorePlayer 3.02 > HiFiBerry DAC+ > Sharp micro system *In car* - LMS 7.9.1 > RPi3/Max2Play/Access Point plugin > HiFiBerry DAC+ > car's hifi (files on a 2TB portable USB drive) *Spares* - 1xTouch, 1xSB3, 1xRadio kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
