Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Well after all that (sock) darning. I went back a step or two. When my Kitchen Pi3b+ updated to pCPv8.2 it lost the ability to connect to Wlan - despite many attempts. So this morning downloaded v8.0 and started a new card. That worked eventually. So downloaded v8.1 which has Pi Zero 2W support and imaged that to a new card. It loads on Pi Zero ( though the HDMI in the config file had to be put in safe mode for the screen to work ) Managed to get an IP address from Wlan and did the rest of the set up incl adding the Mini Boss DAC. It's recognized by the LMS server on the Main Pi 3B+ Thanks for all the suggestions. It's much appreciated. The next part of the project is to put the Zero & Mini DAC into a vintage radio. Wish me luck. Julian :-) Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote: > > Further darn. You will soon have enough to repair thos long johns :) 39037 ronnie big picture for a big bloke :):p +---+ |Filename: Julian.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=39037| +---+ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Man in a van wrote: > Julian > > This piZero 2-W > > Is it in a metal case ? > > How did you attatch the gpio pin header ? > > I ask because the wireless antenna > > a) may have been damaged > > b) is performance restricted because of the casing. > > If bought second hand then the previous owner may have damaged the > board. > > If new then obvs, contact the supplier > > ronnie > > I have one of these for setting up > > https://thepihut.com/products/ethernet-hub-and-usb-hub-w-micro-usb-otg-connector > > and a couple of these are very handy > > https://thepihut.com/products/usb-to-microusb-otg-converter-shim Ronnie All good things to ask :-) I soldered the 40 pin - I think I am quite good at that as I repair vintage HiFi ( you may have seen my posts on PinkFishMedia ). The PiZero is currently sitting on the base of its plastic case - as that is easier to get the SD card in/out. It's all of 2ft from the router. Annoyingly, I put the Rapsian OS SD card back in this morning and that one finds the Wifi and acquires an IP address. So I don't think its the antennae or anything else but something within TC/Picore.Julian Further darn. Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Julian This piZero 2-W Is it in a metal case ? How did you attatch the gpio pin header ? I ask because the wireless antenna a) may have been damaged b) is performance restricted because of the casing. If bought second hand then the previous owner may have damaged the board. If new then obvs, contact the supplier ronnie I have one of these for setting up https://thepihut.com/products/ethernet-hub-and-usb-hub-w-micro-usb-otg-connector and a couple of these are very handy https://thepihut.com/products/usb-to-microusb-otg-converter-shim Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Greg Erskine wrote: > hi Operajulian, > > I usually have different ssid names for 2.4GHz and 5GHz. I was wondering > if your RPi3B+ has only 2.4GHz but is trying to attach to 5GHz??? > > regards > Greg Greg Thanks so much for taking a look. I am in Toronto Canada with a Bell 3000 router. It has both 5 and 2.4 channels with the same SSID I also have a SSID guest as well. Oh well That said the ethernet setup went great - plugged to phono outputs of the MiniBoss to a Tivoli Radio aux input. My main Pi with LMS can find the Zero Pi and load music/apps etc into the playing cue. So thats all good :-) Cheers again Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Well I tried a whole new download of pcp v8.2 64 bit version. Extracted it and Rasp Imager onto a new card ( yes with the settings options ). No network find for Wifi - again Thanks to the wonders of Amazon Prime - got an OTG USB to ethernet adaptor Tried via ethernet and a IP address is found. Logged in the pcp via the IP address Re-entered the Wifi credentials and saved thus creating a PSK paraphrase. Recognises other changes in the pcp settings eg the Mini Boss DAC but still no Wifi - DARN Off to have a beer Not a successful Pi day/evening Cheers Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
hi Operajulian, I was just looking at your wifi-diag in pastebin. (posted 23 hours ago?) I haven't seen a wifi network like yours before. New technology? I'll just post a few things hoping someone can chime in. 29 wifi AP's with quite a few with having a blank ssid. The strongest ssid which I assume you are trying to attach too, has 3 networks, 2.4GHz, 5GHz and something else???. I usually have different ssid names for 2.4GHz and 5GHz. I was wondering if your RPi3B+ has only 2.4GHz but is trying to attach to 5GHz??? regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote: > . > I have been using the Raspberry Imager and the settings option as well > to try and set the SSID,Password and Country code and that did not work > either. > > Julian Just so you are sure :):):):- One needs to load the rpi Bullseye Lite Image and fill in the settings for SSH and Wi-Fi ( I just use pi and raspberry for user id and passwd when testing). These settings don't work for piCorePlayer and one must unzip the PCP download to reach the .img I have just done the recommended tests for my Zero and it appears to have just fallen of the network like a Norwegian Blue:rolleyes: Just emailed the supplier to see if I'm eligible for a replacement ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Man in a van wrote: > I don't think it is as bad now > > > > *@Julian*; how do you determine the IP address of the zero 2W ? > > ronnie Ronnie I have a Kindle Fire with analiti app on it - it can scan all the devices using wifi and also lists the MAC addresses. Cheers Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote: > Paul > Tried that in Notepad ++ > > Still no joy at finding network when using wifi. > > Tried the same on 3b+ card - same - no wifi. > > Though when I hook up to etherent it finds an IP address. > I appreciate the help and advice - gents > > Julian Greg I tried an upload of the Wifi Diag to the pcp Pastebin - all new to me. Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Paul Webster wrote: > Notepad on Windows is not a good idea for a text file that is going to > be read on a Linux system. > > Easy way to verify use NotepadPlusPlus (open source) and tell it to > save with Unix line endings Paul Tried that in Notepad ++ Still no joy at finding network when using wifi. Tried the same on 3b+ card - same - no wifi. Though when I hook up to etherent it finds an IP address. I appreciate the help and advice - gents Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Man in a van wrote: > I don't think it is as bad now > > 'https://mspoweruser.com/windows-notepad-now-supports-linux-line-feeds/ > ' > (https://mspoweruser.com/windows-notepad-now-supports-linux-line-feeds/) > > and in my post (#11) I did say I used Windows and it worked, just sayin > :):) > > But still a good suggestion > > I have also noticed that often I can't get "http://pcp.local; to work, > but the IP Address nearly always does > > *@Julian*; how do you determine the IP address of the zero 2W ? > > ronnie Thanks again I don't know how many SD swaps and tries and still not getting there. In the process lost all the details of my Kitchen 3B+ and had to restore that. I have been using the Raspberry Imager and the settings option as well to try and set the SSID,Password and Country code and that did not work either. I will try the NotepadPlusPlus - just to be sure. Cheers Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Found my RPi0W. I just did a fresh pCP 8.2.0 (32bit) build on a RPi0W using wifi and HDMI. All went according to plan. Even http://pcp.local works. Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
I just did a fresh pCP 8.2.0 (64bit) build on a RPi02W using wifi. All went according to plan. Even http://pCPRPi02W.local works. I just noticed I picked up my RPi02W instead of a RPi0W. I'll see if I can find one and try again. BTW: mdns is NOT working on my other pCP's. I am wondering if I only ever test on a fresh pCP builds? Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
I'm suffering from too much initialisation :):) Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
UDP is what is used by mDNS/bonjour - it is the protocol underneath TCP/IP Paul Webster author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc australia and cbc/radio-canada and, via the extra \"radio now playing\" plugin lots more - see https://forums.slimdevices.com/showthread.php?115201-announce-radio-now-playing-plugin Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Paul Webster wrote: > Yes - bonjour - but in theory not needed with modern versions of Windows > 10 as seems to be the case for you given that others work. > > Another idea which wont be right if it worked on same RPi > and same AP with Raspberry Pi OS perhaps the UDP broadcast not > going through the WIFi AP. Well I might look tomorrow, when I find out what you mean :confused: :) But it's a job for another day :) ronnie Ah, just worked out what you mean, yes it works on the same raspberry pi using the raspberry pi OS. The RPI Imager Tool allows one to preconfigure the wpa_supplement file (amongst other things). I'll look up UDP later :p Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Yes - bonjour - but in theory not needed with modern versions of Windows 10 as seems to be the case for you given that others work. Another idea which wont be right if it worked on same RPi and same AP with Raspberry Pi OS perhaps the UDP broadcast not going through the WIFi AP. Paul Webster author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc australia and cbc/radio-canada and, via the extra \"radio now playing\" plugin lots more - see https://forums.slimdevices.com/showthread.php?115201-announce-radio-now-playing-plugin Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Paul Webster wrote: > Modern Windows Notepad can preserve line endings but I dont think it > offers a save as choice. > So if you start from a fresh file in Windows Notepad then it has Windows > line endings. > > However, if your RPi is getting a reachable IP address then it is > working. > > If pcp.local is not working (and you have not personalised the host > name) then it implies, to me, that your Windows machine does not have > mDNS support. > > For older versions of Windows, installing Apple iTunes is one way to get > it. > (not checked back to see which version of Windows you are running). Hi Paul, thanks for the info, the old Apple ITunes install (was that for the Bonjour which accompanied it ?) :o I'm on Windows 10 Pro, I have no problem with moode.local, volumio.local or raspberrypi.local. I have always had problems with pcp.local, sometimes it works without a problem and other times I have to resort to IP Address. It doesn't seem to like my network. This irritates me, but as I only use pCP on one device for my personal use, I can live with it. I tend to use the raspberry PI OS for LMS and Squeezelite and play with other OS as a way of learning :confused:. Sometimes I learn big and sometimes little :) Keep safe ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
In theory, piCorePlayer should handle different formatted text files. pCP changes the EOL markers and just reads the ssid and password and creates a fresh config file. But there is always a chance that there is some combination not accounted for?? Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Modern Windows Notepad can preserve line endings but I dont think it offers a save as choice. So if you start from a fresh file in Windows Notepad then it has Windows line endings. However, if your RPi is getting a reachable IP address then it is working. If pcp.local is not working (and you have not personalised the host name) then it implies, to me, that your Windows machine does not have mDNS support. For older versions of Windows, installing Apple iTunes is one way to get it. (not checked back to see which version of Windows you are running). Paul Webster author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc australia and cbc/radio-canada and, via the extra \"radio now playing\" plugin lots more - see https://forums.slimdevices.com/showthread.php?115201-announce-radio-now-playing-plugin Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Paul Webster wrote: > Notepad on Windows is not a good idea for a text file that is going to > be read on a Linux system. > > Easy way to verify use NotepadPlusPlus (open source) and tell it to > save with Unix line endings I don't think it is as bad now 'https://mspoweruser.com/windows-notepad-now-supports-linux-line-feeds/ ' (https://mspoweruser.com/windows-notepad-now-supports-linux-line-feeds/) and in my post # I did say I used Windows and it worked, just sayin :):) But still a good suggestion I have also noticed that often I can't get "http://pcp.local; to work, but the IP Address nearly always does *@Julian*; how do you determine the IP address of the zero 2W ? ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Notepad on Windows is not a good idea for a text file that is going to be read on a Linux system. Easy way to verify use NotepadPlusPlus (open source) and tell it to save with Unix line endings Paul Webster author of \"now playing\" plugins covering radio france (fip etc), planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, abc australia and cbc/radio-canada and, via the extra \"radio now playing\" plugin lots more - see https://forums.slimdevices.com/showthread.php?115201-announce-radio-now-playing-plugin Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote: > Thanks Ronnie > > I used Notepad on a Windows computer to make the wpa_ file. I also > edited the config file to put the HDMI into safe mode - and that worked. > So I don't think it is the text editor. > I having another think - sorry to read about your Pi Zero 2w. > > Julian I would try without theconfig file edit, just wpa_supplicant Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Man in a van wrote:
> How did you make the file Julian, which text editor and did you type the
> file title or copy and paste?
>
> I have done the latter before, and in copying
> wpa_suplicant.conf.sample, I actually called the file
> wpa_suplicant.conf. {note the full stop}
>
> ronnie
>
> I'm just repeating the procedure on a different piZero 2W, as the one I
> used earlier in this thread died just after I posted :(:(
> Ahh
>
>
> ronnie
Thanks Ronnie
I used Notepad on a Windows computer to make the wpa_ file. I also
edited the config file to put the HDMI into safe mode - and that worked.
So I don't think it is the text editor.
I having another think - sorry to read about your Pi Zero 2w.
Julian
Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482
View this thread: http://forums.slimdevices.com/showthread.php?t=112765
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote:
> Well I tried all those and more.
>
> I moved everything upstairs to be right beside the router.
> I loaded a fresh SD card with Raspbian OS and all that worked fine -
> including finding the network and getting an IP address.
>
> So loaded a new SD with Picore image 8.2 - went through the whole
> process again and still no network found.
> Yes I have triple checked the wpa_supplicant.conf file and it has the
> exact same details as the successful Raspbian OS card.
>
> Darn - time for a coffee and a rethink.
> Julian
How did you make the file Julian, which text editor and did you type the
file title or copy and paste?
I have done the latter before and in copying wpa_suplicant.conf.sample
I actually called the file wpa_suplicant.conf. {notethe gull stop}
ronnie
I' kust repeating the procedure on a different piZero 2W as the one I
used earlie in this thread died just after i posted :(:(
Ahh
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=112765
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote: > Thanks Ronnie ( & also Greg ) > > That gives me a few things to try over the weekend. I have to be at work > today. Much appreciate all the work/ideas/updates that all of this team > undertake to keep all these different ways of using Rasp Pi and LMS an > ongoing project. Cheers - Julian Well I tried all those and more. I moved everything upstairs to be right beside the router. I loaded a fresh SD card with Raspbian OS and all that worked fine - including finding the network and getting an IP address. So loaded a new SD with Picore image 8.2 - went through the whole process again and still no network found. Yes I have triple checked the wpa-supplicant.conf file and it has the exact same details as the successful Raspbian OS card. Darn - time for a coffee and a rethink. Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Man in a van wrote: > @OPERAJULIAN > > Julian, I followed @Castalla's example (post #2) on a Windows 10 Pro > Desktop using Wordpad. > > I dragged the wpa_supplicany.conf file into the open boot parttion on > the Desktop. > > This is pCP v8.2.0 32 bit standard > > > > Plugged the card into the piZero 2W, waited about 3 minutes and typed > > > Code: > > http://pcp.local > > > > into a browser. > > Maybe a typo ? > > atb > > ronnie Thanks Ronnie ( & also Greg ) That gives me a few things to try over the weekend. I have to be at work today. Much appreciate all the work/ideas/updates that all of this team undertake to keep all these different ways of using Rasp Pi and LMS an ongoing project. Cheers - Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
If you have special characters in your ssid or password. Use the # Maintained by user field in the conf file. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://picoreplayer.org/index.html#donate) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
@OPERAJULIAN
Julian, I followed @Castalla's example (post #2) on a Windows 10 Pro
Desktop using Wordpad.
I dragged the wpa_supplicany.conf file into the open boot parttion on
the Desktop.
This is pCP v8.2.0 32 bit standard
>
>
> # Maintained by piCorePlayer
> #
> # If you would like to maintain wifi settings in the web interface
> remove the above line.
> #
> #
> # These two lines should left as is, it is how pCP is configured
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=staff
>
> # The next line is the two character country code where the device is
> operating.
> # Reference: https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
> country=GB
>
> update_config=1
>
>
> # This is the details about your Wireless network. Configure as needed.
> # Most will just need to change the ssid and psk.
>
> network={
> ssid="PLUSNET-***"
> psk="c**f**8"
> key_mgmt=WPA-PSK
> auth_alg=OPEN
> }
>
>
Plugged the card into the piZero 2W, waited about 3 minutes and typed
Code:
http://pcp.local
into a browser.
Maybe a typo ?
atb
ronnie
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=112765
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Operajulian wrote: > Ronnie > I have tried this on a new Rasp Pi Zero 2W and keep getting " Valid IP > Address Not Found". > > ( my other Rasp Pi 3B+ load fine with the exact same SSID and password ) > Darn > Julian I'll have a look tomorrow Julian, it's welterusten from me and goodnight from ..you get the idea :):):p ronnie Julian, have you tried the rpi3b+ card in the Zero 2 W ? Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Man in a van wrote: > Note, it also may change the wireless IP address (well it does on mine > :) ) but you can see the new one on the wifi page after you save :) > > ronnieRonnie I have tried this on a new Rasp Pi Zero 2W and keep getting " Valid IP Address Not Found". ( my other Rasp Pi 3B+ load fine with the exact same SSID and password ) Darn Julian Operajulian's Profile: http://forums.slimdevices.com/member.php?userid=70482 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Thank you for all the help! I've got everything running and have attached my USB drive with my music. Exploring the plugins and other music sources now. -Alan0 Alan0's Profile: http://forums.slimdevices.com/member.php?userid=70538 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
It doesn't happen on my system. I guess its a function of your DHCP settings. My IP addresses remain fairly consistent until there is a power failure. Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Greg Erskine wrote: > Hi Alan0, > > When you have "# Maintained by piCorePlayer" in your wpa_supplicant.conf > initially on your boot partition, pCP just reads your SSID and password > and creates a new wpa_supplicant.conf. So as long as you get the ssid= > and psk= lines correct it should work. We do this because we assume most > people will make a typo or formatting error. For example, castalla's > example has the last } missing. :D > > As I know this, my initial wpa_supplicant.conf are just this. > > > Code: > > ssid="yourssid" > psk="password" > > > > > > Once you have Wifi working you can go into the [Wifi] page and type > your a password again, add the country code, then press [Save]. This > will create a new wpa_supplicant.conf with the country code added plus > it will encrypt your password so you don't have your password stored > as plain text. > > regards > Greg Note, it also may change the wireless IP address (well it does on mine :) ) but you can see the new one on the wifi page after you save :) ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Hi Alan0, When you have "# Maintained by piCorePlayer" in your wpa_supplicant.conf initially on your boot partition, pCP just reads your SSID and password and creates a new wpa_supplicant.conf. So as long as you get the ssid= and psk= lines correct it should work. We do this because we assume most people will make a typo or formatting error. For example, castalla's example has the last } missing. :D As I know this, my initial wpa_supplicant.conf are just this. Code: ssid="yourssid" psk="password" Once you have Wifi working you can go into the [Wifi] page and type your a password again, add the country code, then press [Save]. This will create a new wpa_supplicant.conf with the country code added plus it will encrypt your password so you don't have your password stored as plain text. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Alan0 wrote: > Thank you! I must have had a typo in the file. > > I've got an IP address now and can see the piCorePlayer page on that > address (192.168.1.14). I'll connect the DAC board and continue the > setup of Squeezelite and LMS on that page. > > Thank you again, > Alan0 Good luck LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0 Amp: Denon PMA-50 Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam, Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Fiio M6, Avantree Priva BT transmitter castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
castalla wrote: > Just create the wpa supplicant file in the boot partition. Change > country to your location > > Use a text editor > > . . . > > Then boot the pi zero. Check the IP address the pi receives from your > router. Use this address (eg. 192.168.0.123) in a browser to get the > PcP dashboard Thank you! I must have had a typo in the file. I've got an IP address now and can see the piCorePlayer page on that address (192.168.1.14). I'll connect the DAC board and continue the setup of Squeezelite and LMS on that page. Thank you again, Alan0 Alan0's Profile: http://forums.slimdevices.com/member.php?userid=70538 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
Just create the wpa supplicant file in the boot partition. Change
country to your location
Use a text editor
# Maintained by piCorePlayer
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=staff
# Two Character Country Code
country=US
update_config=1
network={
ssid="yourssid"
psk="password"
key_mgmt=WPA-PSK
auth_alg=OPEN
Then boot the pi zero. Check the IP address the pi receives from your
router. Use this address (eg. 192.168.0.123) in a browser to get the
PcP dashboard
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5,
Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler, Fiio M6,
Avantree Priva BT transmitter
castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624
View this thread: http://forums.slimdevices.com/showthread.php?t=112765
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] piCorePlayer on RPi Zero W - first time wifi settings
I'm new to piCorePlayer and am attempting to set it up on a RPi Zero W with an Allo MiniBoss DAC board. This hardware setup has worked with Volumio, but I'd like to give piCorePlayer a try after hearing about it from a John Darko article. My problem is a basic one: I cannot get the system to connect to my wi-fi, using the two methods on the how_to_setup_wifi_on_pcp_without_ethernet page. 1. When I use the setup program with a keyboard and monitor, the settings appear to be saved. After rebooting, I get "Waiting for network...No network found", and the boot process gets stuck trying to set the date and time (I assume with a service that it can't reach). When I run setup again, the wi-fi settings are blank. Should they still be there, or are they just for one time use? 2. When I create a custom wpa_supplicant.conf file on the SD card, I get similar results. The wi-fi settings appear to be loaded and the system reboots a second time when starting up. I get "Waiting for network...No network found", and the process hangs up in the same way trying to set the date. I noticed after booting that the file has been renamed to "used_wpa_supplicant.conf" on the SD card. I've tried the suggestions on the faq_wifi_does_not_work page, like removing the DAC board and verifying the SSID and password. The wi-fi is built into my RPi, so I don't think it's any of the USB adapter issues. Any help would be most appreciated. -Alan0 Alan0's Profile: http://forums.slimdevices.com/member.php?userid=70538 View this thread: http://forums.slimdevices.com/showthread.php?t=112765 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
