Re: [ovirt-users] VM Template Error

[Shahar Havivi]

According to the log the the storage domain (where the disk is stored is
not exists)
StorageDomainDoesNotExist: Storage domain does not exist:
(u'2de6ad97-1f33-41e5-b021-bacec14ce6e4',)

Does all the storage domain active in your data center?
Did you move the disk or remove and added a different storage domain?

On Wed, May 3, 2017 at 8:30 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:

>
> On 3 May 2017, at 16:09, Bryan Sockel  wrote:
>
> Hi.  the vm does exist and is bootable.  The vm only has one disk and it
> is enabled.
>
>
> yes, but the template’s copy of that disk somehow can’t be created.
> Perhaps share more of the vdsm logs to see why the image copy failed
>
> Thanks,
> michal
>
>
>
> Thanks
>
>
>
> -Original Message-
> From: Shahar Havivi 
> To: Bryan Sockel 
> Cc: "users@ovirt.org" 
> Date: Wed, 3 May 2017 09:05:34 +0300
> Subject: Re: [ovirt-users] VM Template Error
>
> its looks like vdsm complain that the image is not exists.
> can you run the VM with no errors? (if the VM have more then one disk make
> sure that its exists and accessible).
>
> if all good please attach the full vdsm and engine log.
>
>  Shahar.
>
> On Tue, May 2, 2017 at 6:29 PM, Bryan Sockel 
> wrote:
>>
>> Hi,
>>
>> Having an issue a template from a VM's.
>>
>> I am getting the following errors:
>> engine.log
>> 2017-05-02 09:40:10,059-05 INFO  [org.ovirt.engine.core.dal.db
>> broker.auditloghandling.AuditLogDirector] (default task-24) [2ef2fce]
>> EVENT_ID: USER_ADD_VM_TEMPLATE(48), Correlation ID:
>> 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID:
>> fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID:
>> -1, Message: Creation of Template test from VM Windows-10-Template was
>> initiated by admin@internal-authz.
>>
>> 2017-05-02 09:48:43,059-05 ERROR [org.ovirt.engine.core.dal.dbb
>> roker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-7-thread-20)
>> [] EVENT_ID: USER_ADD_VM_TEMPLATE_FINISHED_FAILURE(52), Correlation ID:
>> 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID:
>> fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID:
>> -1, Message: Failed to complete creation of Template test from VM
>> Windows-10-Template.
>>
>> Events Log
>> ID 10803 - VDSM command DeleteImageGroupVDS failed: Image does not exist
>> in domain: u'image=6aa525ad-e7f1-432b-959a-2223f7e77083,
>> domain=e371d380-7194-4950-b901-5f2aed5dfb35'
>> ID 10802 - VDSM vm-host-colo-2 command HSMGetAllTasksStatusesVDS failed:
>> low level Image copy failed
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Hosted engine already imported

[Jamie Lawrence]

> 
> On May 2, 2017, at 12:04 AM, Simone Tiraboschi  wrote:
> 
> 
> 
> On Sat, Apr 29, 2017 at 1:11 AM, Jamie Lawrence  
> wrote:
> I’m wondering if I can do this a different way. Since it is already imported, 
> I can create VMs, and the only other warning I’m getting in the logs is 
> unrelated, I’m thinking that the problem here is that something didn’t get 
> properly set in the DB, and I should be able to fix that manually.

> I realize this is not supposed to be the way to do things. But I’m not 
> finding a better solution, and attempting to find a “right” way via questions 
> to this isn’t working either. And of course I take full responsibility when 
> Ovirt  kills my pets and drinks all my liquor.
> 
> 
> I'd suggest to destroy (but without deleting its content!!!) the 
> hosted-engine storage domain in the engine: the auto-import process should 
> simply trigger again.

OK, I'm in a place where I can try this, but am unsure as to how to do it. 
Selecting the hosted engine SD, it won't allow me to place it in maintenance 
("Error while executing action: Cannot deactivate Storage. The storage selected 
contains the self hosted engine."). Poking around more the only related action 
I can find that isn't disabled is Gluster stop, which, if it is allowed, would 
seem likely to end badly - if the Gluster volume is stopped,  the running 
engine VM won't be accessible,  and of course the engine auto-import process 
wouldn't find anything.

So, how does one destroy the hosted engine volume from within the engine?

-j
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] collectd, fluentd, ...

[Troels Arvin]

Hello,

Setup: RHV 4.1 with full RHEL 7 servers as hypervisor hosts.

I noticed an "Update available" symbol for all the hypervisor hosts. 
Running "yum update" on the hosts themselves didn't list any pending 
updates.

Running "check for available updates" on the hosts in the RHV web 
interface resulted in a long list of software which RHV would like to 
add, it seems, see below.

What's all that, and is it really needed?

The packages:
found updates for packages collectd-5.7.0-4.el7, collectd-
disk-5.7.0-4.el7, collectd-netlink-5.7.0-4.el7, collectd-
virt-5.7.0-4.el7, collectd-write_http-5.7.0-4.el7, fluentd-0.12.29-1.el7, 
libcollectdclient-5.7.0-4.el7, ruby-2.0.0.648-29.el7, ruby-
irb-2.0.0.648-29.el7, ruby-libs-2.0.0.648-29.el7, rubygem-
bigdecimal-1.2.0-29.el7, rubygem-cool.io-1.4.5-2.el7, rubygem-fluent-
plugin-rewrite-tag-filter-1.5.5-3.el7, rubygem-fluent-plugin-secure-
forward-0.4.3-2.el7, rubygem-http_parser.rb-0.6.0-3.el7, rubygem-io-
console-0.4.2-29.el7, rubygem-json-1.7.7-29.el7, rubygem-
msgpack-0.5.12-2.el7, rubygem-proxifier-1.0.3-2.el7, rubygem-
psych-2.0.0-29.el7, rubygem-rdoc-4.0.0-29.el7, rubygem-resolve-
hostname-0.0.4-1.el7, rubygem-sigdump-0.2.4-1.el7, rubygem-string-
scrub-0.0.5-3.el7, rubygem-thread_safe-0.3.5-2.el7, rubygem-
tzinfo-1.2.2-3.el7

-- 
Regards,
Troels Arvin, Copenhagen

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] [oVirt4.1] Does oVirt 4.1 support iSCSI offload?

[Luca 'remix_tj' Lorenzetto]

On Wed, May 3, 2017 at 6:57 PM, wodel youchi  wrote:

> Hi again, and sorry for the delay, I was sick, actually I am still
> sick :-(
>
> Just to have more details, from what I have read about iSCSI offload,
> there are two modes, depending on the hardware you have (the adapter),
> using VMware terminology, no offense :-) , there is :
>
> - Dependent mode : in this mode the adapter still need the software iSCSI
> to use the network configuration of the nic port, so the discovery is done
> on tcp, the rest on offload driver like bnxi2.
>
> - Independent mode : in this mode the adapter takes all the work by
> itself, the network part, it will have it's own IP address and so on, and
> it does not need anything from the OS or the software iSCSI, the
> configuration is made in the BIOS of the adapter, and the connection is
> made before the OS is up.
>
> Does the configuration on oVirt support the two modes? and is there any
> differences when using them, I mean during the setup.
>
> [cut]

Hello,

I've no direct experience, but i suppose that both modes are available, if
they are supported by a standard RHEL machine. In particular the
"Independent mode" should be like said before: you'll see the storage as FC
lun. In the other mode i think is a standard iSCSI setup, but requires the
driver for taking advantage of the offloading.

Luca

-- 
"E' assurdo impiegare gli uomini di intelligenza eccellente per fare
calcoli che potrebbero essere affidati a chiunque se si usassero delle
macchine"
Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)

"Internet è la più grande biblioteca del mondo.
Ma il problema è che i libri sono tutti sparsi sul pavimento"
John Allen Paulos, Matematico (1945-vivente)

Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <
lorenzetto.l...@gmail.com>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Disable guest agent needs to be installed warnings

[Michael Watters]

Is there a way to disable the guest agent needs to be installed warnings
in ovirt?  I have guest VMs which cannot be updated due to having older
operating systems installed.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?

[Yuval Turgeman]

Hi, you can try the following:

1.  Make sure you have a /etc/iscsi/initiatorname.iscsi file.  If you
don't, create an empty one (to avoid a migration bug)
2.  Install the ovirt-release41 rpm (
http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm)
3.  yum update ovirt-node-ng-image-update
4.  Make sure only 2 rpms are about to be installed
(ovirt-node-ng-image-update and ovirt-node-ng-image) ~530M

Save /tmp/imgbased.log in case something fails so we could take a look :)

Thanks,
Yuval




On Wed, May 3, 2017 at 6:23 PM, Beckman, Daniel <
daniel.beck...@ingramcontent.com> wrote:

> I don’t recall doing anything special with the repositories, apart from
> (recently) adding the oVirt 4.1 repository. These hosts were originally
> deployed by downloading the oVirt Node 4.0.3 ISO image.
>
>
>
> How should the repos be setup? Is there an RPM I can download that will
> install the appropriate repos?
>
>
>
> Thanks,
>
> Daniel
>
>
>
> *From: *Yuval Turgeman 
> *Date: *Tuesday, May 2, 2017 at 2:56 PM
> *To: *"Beckman, Daniel" 
> *Cc: *"users@ovirt.org" , Yedidyah Bar David <
> d...@redhat.com>, "sbona...@redhat.com" 
> *Subject: *Re: [ovirt-users] Upgrade 4.0.6 to 4.1.1 -- How to Update
> oVirt Node (4.x) Hosts?
>
>
>
> Looks like your repos are not set up correctly.  oVirt node is an image
> and the update is a complete image as well, containing a set packages that
> were tested and known to work well together.  This means that when you yum
> update your system, a single "ovirt-node-ng-image-update" rpm should be
> installed instead of a list of packages like you mentioned.  That's
> probably what messed things up.  How did you configure your repos ?
>
>
>
> On May 1, 2017 6:15 PM, "Beckman, Daniel"  com> wrote:
>
> Hello,
>
> I’ve attached the log file for one of the hosts from
> /var/log/ovirt-engine/host-deploy.
>
> As to the manual update: yes, I ran it after removing the ovirt40 repo and
> adding ovirt41 repo. Here are the packages it updated:
> Updated cockpit-ovirt-dashboard-0.10.6-1.4.2.el7.centos.noarch
>   ?
> Update  0.10.7-0.0.16.el7.centos.noarch
>@ovirt-4.1
> Dep-Install collectd-5.7.0-2.el7.x86_64
>  @centos-opstools-release
> Dep-Install collectd-disk-5.7.0-2.el7.x86_64
>   @centos-opstools-release
> Dep-Install collectd-netlink-5.7.0-2.el7.x86_64
>@centos-opstools-release
> Dep-Install collectd-virt-5.7.0-2.el7.x86_64
>   @centos-opstools-release
> Dep-Install collectd-write_http-5.7.0-2.el7.x86_64
>   @centos-opstools-release
> Dep-Install fluentd-0.12.26-2.el7.noarch
>   @centos-opstools-release
> Dep-Install gdeploy-2.0.1-13.noarch
>  @rnachimu-gdeploy
> Updated glusterfs-3.7.20-1.el7.x86_64
>?
> Update3.8.11-1.el7.x86_64
>  @ovirt-4.1-centos-gluster38
> Updated glusterfs-api-3.7.20-1.el7.x86_64
>?
> Update3.8.11-1.el7.x86_64
>  @ovirt-4.1-centos-gluster38
> Updated glusterfs-cli-3.7.20-1.el7.x86_64
>?
> Update3.8.11-1.el7.x86_64
>  @ovirt-4.1-centos-gluster38
> Updated glusterfs-client-xlators-3.7.20-1.el7.x86_64
>   ?
> Update   3.8.11-1.el7.x86_64
>   @ovirt-4.1-centos-gluster38
> Updated glusterfs-fuse-3.7.20-1.el7.x86_64
>   ?
> Update 3.8.11-1.el7.x86_64
>   @ovirt-4.1-centos-gluster38
> Updated glusterfs-geo-replication-3.7.20-1.el7.x86_64
>?
> Update3.8.11-1.el7.x86_64
>  @ovirt-4.1-centos-gluster38
> Updated glusterfs-libs-3.7.20-1.el7.x86_64
>   ?
> Update 3.8.11-1.el7.x86_64
>   @ovirt-4.1-centos-gluster38
> Updated glusterfs-rdma-3.7.20-1.el7.x86_64
>   ?
> Update 3.8.11-1.el7.x86_64
>   @ovirt-4.1-centos-gluster38
> Updated glusterfs-server-3.7.20-1.el7.x86_64
>   ?
> Update   3.8.11-1.el7.x86_64
>   @ovirt-4.1-centos-gluster38
> Updated imgbased-0.8.11-0.201612061451git1b9e081.el7.centos.noarch
> ?
> Update   0.9.23-1.el7.centos.noarch
>  @ovirt-4.1
> Updated ioprocess-0.16.1-1.el7.x86_64
>@?ovirt-centos-ovirt41
> Update0.17.0-1.201611101241.gitb7e353c.el7.centos.x86_64
>   @ovirt-4.1
> Dep-Install libtomcrypt-1.17-23.el7.x86_64
>   @ovirt-4.1-epel
> Dep-Install libtommath-0.42.0-4.el7.x86_64
>   @ovirt-4.1-epel
> Dep-Install libtool-ltdl-2.4.2-22.el7_3.x86_64
>   @updates
> Updated mom-0.5.8-1.el7.centos.noarch
>

Re: [ovirt-users] Various issues trying to get a new 4.1 install up and running

[Jason Brooks]

On Wed, May 3, 2017 at 9:34 AM, Jason Ziemba  wrote:
> I'm utilizing the latest node ISO
> (ovirt-node-ng-installer-ovirt-4.1-2017050204.iso), upon installing on a
> system I utilize the Web Cockpit UI to install the 4.1 hosted engine
> (successfully), resulting in the following engine version:
> 4.1.1.8-1.el7.centos.  The node is also running 4.1.1.1
>
> After installing the engine and accessing the Engine Web Admin I'm
> encountering the following issues:
>
> I'm not seeing any storage domains in the console (though the engine is
> installed using NFS).
> Attempts to import the NFS storage domain that the engine resides in (for
> other VMs to also reside in) fail due to inability to find host ID.

You need to add a data domain, and after you do that, the hosted
engine domain will show up.

>
> Attempts to add (import) the storage domain again once again fails, though
> this time it states that the Storage connection already exists (yet it isn't
> listed in the storage domains).
>
> The hosted engine doesn't show up in the console, though Bug 1269768 states
> that was supposed to be corrected in 3.6.1
> Installing (from the same ISO) subsequent hosts and then using the Engine to
> bring the node in to the cluster, the additional nodes don't have the
> ability to run the hosted engine (based on the lack of the crown icon),
> preventing the original node from entering maintenance mode as the engine
> (which can't be seen) isn't able to migrate to a different node.
>
> I'm not sure where to begin reviewing/troubleshooting based on these items.
> Any guidance would be greatly appreciated.
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] cannot change cluster compatibility level

[Michael Watters]

On 05/03/2017 12:16 PM, Michal Skrivanek wrote:
>
>> On 3 May 2017, at 18:10, Michael Watters > > wrote:
>>
>> I have a cluster of hosts that have just been upgraded to oVirt 4.1
>> however I am receiving an error from the engine when I attempt to
>> upgrade the cluster compatibility level.
>>
>> Error while executing action: Cannot edit Cluster if some of the
>> specified custom properties are not configured by the system. The
>> keys are: macspoof
>> Does anybody know how to resolve this?  I don't see any settings
>> related to MAC spoofing in the cluster configuration options.
>
> you need to define the custom property for the new version as well, if
> you want keep using it. Or remove it from all VMs. It’s not in GUI,
> check engine-config parameters, you likely have the custom property
> for macspoof defined for <=4.0 only.
>
> Thanks,
> michal

Thanks.  I do see a host hook defined for macspoof but I'm working
around the error by migrating VMs to a different cluster which has a
higher compatibility level set.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] VM Template Error

[Michal Skrivanek]

> On 3 May 2017, at 16:09, Bryan Sockel  wrote:
> 
> Hi.  the vm does exist and is bootable.  The vm only has one disk and it is 
> enabled.  

yes, but the template’s copy of that disk somehow can’t be created. Perhaps 
share more of the vdsm logs to see why the image copy failed

Thanks,
michal

>  
>  
> Thanks
>  
>  
> -Original Message-
> From: Shahar Havivi 
> To: Bryan Sockel 
> Cc: "users@ovirt.org" 
> Date: Wed, 3 May 2017 09:05:34 +0300
> Subject: Re: [ovirt-users] VM Template Error
>  
> its looks like vdsm complain that the image is not exists.
> can you run the VM with no errors? (if the VM have more then one disk make 
> sure that its exists and accessible).
>  
> if all good please attach the full vdsm and engine log.
>  
>  Shahar.
>  
> On Tue, May 2, 2017 at 6:29 PM, Bryan Sockel  > wrote:
> Hi,
>  
> Having an issue a template from a VM's.
>  
> I am getting the following errors: 
> engine.log 
> 2017-05-02 09:40:10,059-05 INFO  
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (default task-24) [2ef2fce] EVENT_ID: USER_ADD_VM_TEMPLATE(48), Correlation 
> ID: 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
> fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID: -1, 
> Message: Creation of Template test from VM Windows-10-Template was initiated 
> by admin@internal-authz.
>  
> 2017-05-02 09:48:43,059-05 ERROR 
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
> (org.ovirt.thread.pool-7-thread-20) [] EVENT_ID: 
> USER_ADD_VM_TEMPLATE_FINISHED_FAILURE(52), Correlation ID: 
> 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
> fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID: -1, 
> Message: Failed to complete creation of Template test from VM 
> Windows-10-Template.
>  
> Events Log
> ID 10803 - VDSM command DeleteImageGroupVDS failed: Image does not exist in 
> domain: u'image=6aa525ad-e7f1-432b-959a-2223f7e77083, 
> domain=e371d380-7194-4950-b901-5f2aed5dfb35'
> ID 10802 - VDSM vm-host-colo-2 command HSMGetAllTasksStatusesVDS failed: low 
> level Image copy failed
> 
> ___
> Users mailing list
> Users@ovirt.org 
> http://lists.ovirt.org/mailman/listinfo/users 
> 
>  
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] [oVirt4.1] Does oVirt 4.1 support iSCSI offload?

[wodel youchi]

Hi again, and sorry for the delay, I was sick, actually I am still sick
:-(

Just to have more details, from what I have read about iSCSI offload, there
are two modes, depending on the hardware you have (the adapter), using
VMware terminology, no offense :-) , there is :

- Dependent mode : in this mode the adapter still need the software iSCSI
to use the network configuration of the nic port, so the discovery is done
on tcp, the rest on offload driver like bnxi2.

- Independent mode : in this mode the adapter takes all the work by itself,
the network part, it will have it's own IP address and so on, and it does
not need anything from the OS or the software iSCSI, the configuration is
made in the BIOS of the adapter, and the connection is made before the OS
is up.

Does the configuration on oVirt support the two modes? and is there any
differences when using them, I mean during the setup.

Regards.


2017-04-30 7:47 GMT+01:00 Yaniv Kaul :

>
>
> On Sat, Apr 29, 2017 at 7:27 PM, wodel youchi 
> wrote:
>
>> Hi,
>>
>> We have two hypervisors, each one has a 10Gbe nic card with two ports,
>> the cards support iSCSI offload.
>>
>> Does oVirt 4.1 support this?
>>
>
> Yes.
>
>
>> if yes how can someone use it on hosted-engine deployment? the VM engine
>> will be in the SAN targeted by these cards.
>>
>
> Since iSCSI offloading is configured before the OS even loads, to the OS
> (and therefore oVirt hypervisors) it seems that the storage is 'just
> connected' - same as FC for all we care.
>
> Y.
>
>
>>
>> Regards.
>>
>>
>> 
>>  Virus-free.
>> www.avast.com
>> 
>> <#m_8732461098692771785_m_4452747818142096065_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] terminating sessions

[Fabrice Bacchella]

In the UI, I see 73 open sessions, all open by me.

In ovirt logs, I see a lot of :
2017-05-03 18:49:31,483+02 INFO  
[org.ovirt.engine.core.bll.aaa.SessionDataContainer] (DefaultQuartzScheduler3) 
[dcf02fc4-72c3-4237-8855-d4e474766088] Not removing session 
'B/GWJOxyLh3pXQPPitfCk29iiJ3XWMerYdNmOdZyc9ceqD+oAW/hhhZDXCltK+N4yRo9TgunhGR7w7YEELOI5A==',
 session has running commands for user ''.

And indeed I can't close those sessions in the UI.


I have two questions:

Are those sessions accessible using the API ?
How to know what running command is waiting ?


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Various issues trying to get a new 4.1 install up and running

[Jason Ziemba]

I'm utilizing the latest node ISO
(ovirt-node-ng-installer-ovirt-4.1-2017050204.iso), upon installing on a
system I utilize the Web Cockpit UI to install the 4.1 hosted engine
(successfully), resulting in the following engine version:
4.1.1.8-1.el7.centos.
The node is also running 4.1.1.1

After installing the engine and accessing the Engine Web Admin I'm
encountering the following issues:

   - I'm not seeing any storage domains in the console (though the engine
   is installed using NFS).
   - Attempts to import the NFS storage domain that the engine resides in
   (for other VMs to also reside in) fail due to inability to find host ID.
  - Attempts to add (import) the storage domain again once again fails,
  though this time it states that the Storage connection already
exists (yet
  it isn't listed in the storage domains).
   - The hosted engine doesn't show up in the console, though Bug 1269768
   states that was supposed to be corrected in 3.6.1
   - Installing (from the same ISO) subsequent hosts and then using the
   Engine to bring the node in to the cluster, the additional nodes don't have
   the ability to run the hosted engine (based on the lack of the crown icon),
   preventing the original node from entering maintenance mode as the engine
   (which can't be seen) isn't able to migrate to a different node.

I'm not sure where to begin reviewing/troubleshooting based on these
items.  Any guidance would be greatly appreciated.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] cannot change cluster compatibility level

[Michal Skrivanek]

> On 3 May 2017, at 18:10, Michael Watters  wrote:
> 
> I have a cluster of hosts that have just been upgraded to oVirt 4.1 however I 
> am receiving an error from the engine when I attempt to upgrade the cluster 
> compatibility level.
> 
> Error while executing action: Cannot edit Cluster if some of the specified 
> custom properties are not configured by the system. The keys are: macspoof  
> Does anybody know how to resolve this?  I don't see any settings related to 
> MAC spoofing in the cluster configuration options.

you need to define the custom property for the new version as well, if you want 
keep using it. Or remove it from all VMs. It’s not in GUI, check engine-config 
parameters, you likely have the custom property for macspoof defined for <=4.0 
only.

Thanks,
michal
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] cannot change cluster compatibility level

[Michael Watters]

I have a cluster of hosts that have just been upgraded to oVirt 4.1
however I am receiving an error from the engine when I attempt to
upgrade the cluster compatibility level.

Error while executing action: Cannot edit Cluster if some of the
specified custom properties are not configured by the system. The keys
are: macspoof

Does anybody know how to resolve this?  I don't see any settings related
to MAC spoofing in the cluster configuration options.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] log out event but not log in?

[Gonzalo Rafuls]

On Wed, May 3, 2017 at 10:55 AM, Gianluca Cecchi 
wrote:

> On Fri, Feb 24, 2017 at 5:28 PM, Gonzalo Rafuls  wrote:
>
>>
>> On Thu, Feb 23, 2017 at 8:51 AM, Yura Poltoratskiy > > wrote:
>>
>>> I have the same issue since oVirt 4.0.x.
>>>
>>> 21.02.2017 10:28, Gianluca Cecchi пишет:
>>>
 Hello,
 In oVirt 4.1 web admin gui I see events about users logging out (they
 have been created on internal domain with ovirt-aaa-jdbc-tool command),
 but I don't see the corresponding log in event.
 The same is true for the default admin@internal user.
 Is there any reason or is it a bug?

>>>
>> Looks like a bug to me. Raised [1] for it.
>> Thanks for pointing that out!
>>
>> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1426715
>>
>> Cheers,
>> Gonza.-
>>
>>
>>>

> I see that it is now in QA.
> Is it possible to test against a running 4.1.1 or changes are too much?
> From reading the bugzilla I don't see a gerrit reference which files are
> involved...
>

Just verified on 4.1.2. You should be able to see the reference to the
gerrit patch under the external trackers section on that BZ.

https://gerrit.ovirt.org/#/c/73287/


>
> Gianluca
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Hosted Engine Setup fails

[Simone Tiraboschi]

On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar <
manuel.luis.az...@gmail.com> wrote:

> Hello Simone and all others,
>
> I have attached to the mail the requested files. If you have any other
> inquiry just say it, The failed installation drive would be keep safe until
> solving this problem.
>
> Thanks for all in advance
> Manuel
>

The issue is here:
May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package: 10.el7_3.5
(CentOS BuildSystem , 2017-03-03-02:09:45,
c1bm.rdu2.centos.org)
May  1 11:47:45 host1 journal: hostname: host1.bajada.es
May  1 11:47:45 host1 journal: Falló al conectar con el socket de monitor:
No existe el proceso
May  1 11:47:45 host1 journal: internal error: process exited while
connecting to monitor: /dev/random -device
virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg
timestamp=on#012Could not access KVM kernel module: Permission
denied#012failed to initialize KVM: Permission denied
May  1 11:47:45 host1 journal: libvirt version: 2.0.0, package: 10.el7_3.5
(CentOS BuildSystem , 2017-03-03-02:09:45,
c1bm.rdu2.centos.org)
May  1 11:47:45 host1 journal: hostname: host1.bajada.es
May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
entrada/salida
May  1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de
entrada/salida

could you please also check the permission on /dev/random and SELinux audit
logs?



>
> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi :
>
>> Sure, but first we need to understand what it's happening: in our CI
>> process everything is fine so I think it's something specific to your env.
>> Could you please share your:
>> /var/log/libvirt/qemu/HostedEngine.log
>> /var/log/messages
>>
>> thanks,
>> Simone
>>
>>
>> On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Ok thankyou.
>>>
>>> Suppose that this problem probably would be solve in a future release.
>>>
>>> Thanks,
>>> Manuel
>>>
>>> 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi :
>>>


 On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar <
 manuel.luis.az...@gmail.com> wrote:

> Hello there again,
>
> Yes as I say, I have done several clean installations and the VM
> engine sometimes starts without any problem. So Simone any recommendation
> to make the engine VM starts properly?¿
>
> While is installing the HA agent and HA broker are down, would I get
> good result by starting the services myself?¿
>
> Any help from Simone or somebody would be appreciated
> Thanks for all in advance
> Manuel Luis Aznar
>

 I suggest to check libvirt logs.


>
> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi :
>
>>
>>
>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar <
>> manuel.luis.az...@gmail.com> wrote:
>>
>>> Hello there,
>>>
>>> I have been looking in the internet using google why my installation
>>> of ovirt-hosted-engine is failing.
>>>
>>> I have found this link:
>>>
>>>  https://www.mail-archive.com/users@ovirt.org/msg40864.html
>>> (Hosted engine install failed; vdsm upset about broker)
>>>
>>> It seems to be the same error...
>>>
>>> So to knarra and Jamie Lawrence my question is:
>>>
>>> Did you manage to discover the problem?? In my instalation I am
>>> using nfs and not gluster...
>>>
>>> I have read the error and is the same error "BrokerConnectionError:
>>> ...". The ovirt-ha-agent and ovirt-ha-broker did not start when the
>>> installation is creating the engine VM...
>>>
>>
>> This is just a false positive: the HA agent and the HA broker are
>> still down so vdsm is complaining but at that point it's absolutely fine 
>> by
>> itself since the engine VM still doesn't exists.
>> We already have an open bug to reduce the impact of that message.
>>
>> The real issue is that for some reason the engine VM could not start
>> on your system.
>>
>>
>>>
>>> As I have said before any help would be very appreciated...no matter
>>> whom will give it
>>> Thanks for all in advance
>>> Manuel Luis Aznar
>>>
>>>
>>>
>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar <
>>> manuel.luis.az...@gmail.com>:
>>>
 Hello Simone and all the comunity,

 I have been doing the instalation of ovirt hosted engine again and
 it fails, libvirtd and vdsmd services are failing. They are failing 
 with
 the following errors:


 libvirt daemon

   libvirtd.service - Virtualization daemon
Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
 enabled; vendor preset: enabled)
   Drop-In: /etc/systemd/system/libvirtd.service.d
  

Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, existing disk sdb not found or filtered, deployment fails

[Oliver Dietzel]

Worked as described in the blog entry:

"The installer will ask if you want to configure your host and cluster for 
Gluster. Again, click "Next" to proceed. In some of my tests, the installer 
failed at this point, with an error message of Failed to execute stage 
'Environment customization'. When I encountered this, I clicked "Restart 
Setup", repeated the above steps, and was able to proceed normally."

https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/

After a setup restart this error went away.

The last error i had was in the last stage of the setup process.

The installer was unable to connect to the engine vm after creation and timed 
out after about the 10th retry.
Postinstall failed, but the vm itself was up and running and i was able to ssh 
to it and to connect to the web ui.

Log attached.

Thx Oli

-Ursprüngliche Nachricht-
Von: knarra [mailto:kna...@redhat.com] 
Gesendet: Mittwoch, 3. Mai 2017 13:49
An: Oliver Dietzel ; 'users@ovirt.org' 
Betreff: Re: AW: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on 
gluster, existing disk sdb not found or filtered, deployment fails

On 05/03/2017 03:53 PM, Oliver Dietzel wrote:
> Actual size as displayed by lsblk is 558,9G , a combined size of 530 
> GB worked (engine 100, data 180, vmstore 250), but only without thin 
> provisioning. Deployment failed with thin provisioning enabled, but worked 
> with fixed sizes.
>
> Now i hang in hosted engine deployment (having set installation with gluster 
> to yes when asked) with error:
>
> "Failed to execute stage 'Environment customization': Invalid value provided 
> to 'ENABLE_HC_GLUSTER_SERVICE'"
Hi,

 Can you provide me the exact question and your response to that because of 
which your setup failed ?

Thanks
kasturi
>
>
>
> -Ursprüngliche Nachricht-
> Von: knarra [mailto:kna...@redhat.com]
> Gesendet: Mittwoch, 3. Mai 2017 12:16
> An: Oliver Dietzel ; 'users@ovirt.org' 
> 
> Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on 
> gluster, existing disk sdb not found or filtered, deployment fails
>
> On 05/03/2017 03:20 PM, Oliver Dietzel wrote:
>> Thx a lot, i already got rid of the multipaths.
>>
>> Now 5 tries later i try to understand who disk space calc works.
>>
>> I already understand that the combined GByte limit for my drive sdb is 
>> around 530.
>>
>>> sdb8:16   0 558,9G  
>>> 0 disk
>> Now the thin pool creation kicks me! :)
>>
>> (i do a  vgremove gluster_vg_sdb on all hosts and reboot all three 
>> hosts between retries)
>>
>> TASK [Create LVs with specified size for the VGs]
>> **
>> failed: [hv1.iw.rto.de] (item={u'lv': u'gluster_thinpool_sdb',
>> u'size': u'530GB', u'extent': u'100%FREE', u'vg': u'gluster_vg_sdb'}) 
>> => {"failed": true, "item": {"extent": "100%FREE", "lv":
>> "gluster_thinpool_sdb", "size": "530GB", "vg": "gluster_vg_sdb"},
>> "msg": "  Insufficient suitable allocatable extents for logical 
>> volume
>> gluster_thinpool_sdb: 135680 more required\n", "rc": 5}
> I think you should input the size as 500GB if your actual disk size is 530 ?
>> -Ursprüngliche Nachricht-
>> Von: knarra [mailto:kna...@redhat.com]
>> Gesendet: Mittwoch, 3. Mai 2017 11:17
>> An: Oliver Dietzel ; 'users@ovirt.org'
>> 
>> Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on 
>> gluster, existing disk sdb not found or filtered, deployment fails
>>
>> On 05/03/2017 02:06 PM, Oliver Dietzel wrote:
>>> Hi,
>>>
>>> i try to set up a 3 node gluster based ovirt cluster, following this guide:
>>> https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and
>>> -
>>> g
>>> luster-storage/
>>>
>>> oVirt nodes were installed with all disks available in the system, 
>>> installer limited to use only /dev/sda (both sda and sdb are HPE 
>>> logical volumes on a p410 raid controller)
>>>
>>>
>>> Glusterfs deployment fails in the last step before engine setup:
>>>
>>> PLAY RECAP 
>>> *
>>> hv1.iw  : ok=1changed=1unreachable=0failed=0
>>> hv2.iw  : ok=1changed=1unreachable=0failed=0
>>> hv3.iw  : ok=1changed=1unreachable=0failed=0
>>>
>>>
>>> PLAY [gluster_servers]
>>> *
>>>
>>> TASK [Clean up filesystem signature]
>>> ***
>>> skipping: [hv1.iw] => (item=/dev/sdb)
>>> skipping: [hv2.iw] => (item=/dev/sdb)
>>> skipping: [hv3.iw] => (item=/dev/sdb)
>>>
>>> TASK [Create Physical Volume]
>>> **
>>> failed: [hv3.iw] (item=/dev/sdb) => {"failed": true,
>>> "failed_when_result": true, "item": "/dev/sdb", "msg": "  Device 
>>> /dev/sdb not found 

Re: [ovirt-users] Error importing old NFS storage domain

[Endre Karlson]

So I have now attempted to import the domain after fixing other various
issues with the installation and now it says that there's no storage domain
on the specified path even though 10.2.0.15:/mnt/data/vm should contain a
valid vm storage domain?

2017-04-28 9:36 GMT+02:00 Endre Karlson :

> Here I am posting the logs at https://api.creator.no/logs
>
> The host in question that is used for the import and that has some
> glusterTasksList errors on it is ovhost20
>
> 2017-04-27 14:48 GMT+02:00 Elad Ben Aharon :
>
>> Hi,
>>
>> Please provide the logs
>>
>> On Thu, Apr 27, 2017 at 2:12 PM, Endre Karlson 
>> wrote:
>>
>>> I have a existing NFS storage domain I would like to import.
>>>
>>> I add the Name attribute and set the path and hit Enter but it gives me
>>> "Error while executing actions Attach Storage Domain: Internal Engine
>>> Error".
>>>
>>> I checked the Engine logs too to see if there's any clue when I do it
>>> but I cant seem to find anything. Maybe I can attach it here?
>>>
>>>
>>>
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Resolving host non_responsive

[knarra]

On 05/03/2017 05:35 PM, Alan Griffiths wrote:

Hi,

Following a short network outage a couple of HE hosts are reported as 
non_responsive in the engine. Storage was not affected and the VMs 
continue to run on those hosts. Is it possible to bring the hosts back 
under management without disrupting the running of the VMs? Is it as 
simple as confirming host has rebooted?


Thanks,

Alan


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Hi Alan,

One way is to move the host to maintenance which will move all of 
your vms to another host and reinstall it from UI. Another way is to 
confirm host has been rebooted and please make sure that there are no 
vms or vms are migrated.


Thanks

kasturi

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Resolving host non_responsive

[Alan Griffiths]

Hi,

Following a short network outage a couple of HE hosts are reported as
non_responsive in the engine. Storage was not affected and the VMs continue
to run on those hosts. Is it possible to bring the hosts back under
management without disrupting the running of the VMs? Is it as simple as
confirming host has rebooted?

Thanks,

Alan
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, existing disk sdb not found or filtered, deployment fails

[knarra]

On 05/03/2017 03:53 PM, Oliver Dietzel wrote:

Actual size as displayed by lsblk is 558,9G , a combined size of 530 GB worked 
(engine 100, data 180, vmstore 250),
but only without thin provisioning. Deployment failed with thin provisioning 
enabled, but worked with fixed sizes.

Now i hang in hosted engine deployment (having set installation with gluster to 
yes when asked) with error:

"Failed to execute stage 'Environment customization': Invalid value provided to 
'ENABLE_HC_GLUSTER_SERVICE'"

Hi,

Can you provide me the exact question and your response to that 
because of which your setup failed ?


Thanks
kasturi




-Ursprüngliche Nachricht-
Von: knarra [mailto:kna...@redhat.com]
Gesendet: Mittwoch, 3. Mai 2017 12:16
An: Oliver Dietzel ; 'users@ovirt.org' 
Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, 
existing disk sdb not found or filtered, deployment fails

On 05/03/2017 03:20 PM, Oliver Dietzel wrote:

Thx a lot, i already got rid of the multipaths.

Now 5 tries later i try to understand who disk space calc works.

I already understand that the combined GByte limit for my drive sdb is around 
530.
   

sdb8:16   0 558,9G  0 
disk

Now the thin pool creation kicks me! :)

(i do a  vgremove gluster_vg_sdb on all hosts and reboot all three
hosts between retries)

TASK [Create LVs with specified size for the VGs]
**
failed: [hv1.iw.rto.de] (item={u'lv': u'gluster_thinpool_sdb',
u'size': u'530GB', u'extent': u'100%FREE', u'vg': u'gluster_vg_sdb'})
=> {"failed": true, "item": {"extent": "100%FREE", "lv":
"gluster_thinpool_sdb", "size": "530GB", "vg": "gluster_vg_sdb"},
"msg": "  Insufficient suitable allocatable extents for logical volume
gluster_thinpool_sdb: 135680 more required\n", "rc": 5}

I think you should input the size as 500GB if your actual disk size is 530 ?

-Ursprüngliche Nachricht-
Von: knarra [mailto:kna...@redhat.com]
Gesendet: Mittwoch, 3. Mai 2017 11:17
An: Oliver Dietzel ; 'users@ovirt.org'

Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on
gluster, existing disk sdb not found or filtered, deployment fails

On 05/03/2017 02:06 PM, Oliver Dietzel wrote:

Hi,

i try to set up a 3 node gluster based ovirt cluster, following this guide:
https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-
g
luster-storage/

oVirt nodes were installed with all disks available in the system,
installer limited to use only /dev/sda (both sda and sdb are HPE
logical volumes on a p410 raid controller)


Glusterfs deployment fails in the last step before engine setup:

PLAY RECAP *
hv1.iw  : ok=1changed=1unreachable=0failed=0
hv2.iw  : ok=1changed=1unreachable=0failed=0
hv3.iw  : ok=1changed=1unreachable=0failed=0


PLAY [gluster_servers]
*

TASK [Clean up filesystem signature]
***
skipping: [hv1.iw] => (item=/dev/sdb)
skipping: [hv2.iw] => (item=/dev/sdb)
skipping: [hv3.iw] => (item=/dev/sdb)

TASK [Create Physical Volume]
**
failed: [hv3.iw] (item=/dev/sdb) => {"failed": true,
"failed_when_result": true, "item": "/dev/sdb", "msg": "  Device
/dev/sdb not found (or ignored by filtering).\n", "rc": 5}
failed: [hv1.iw] (item=/dev/sdb) => {"failed": true,
"failed_when_result": true, "item": "/dev/sdb", "msg": "  Device
/dev/sdb not found (or ignored by filtering).\n", "rc": 5}
failed: [hv2.iw] (item=/dev/sdb) => {"failed": true,
"failed_when_result": true, "item": "/dev/sdb", "msg": "  Device
/dev/sdb not found (or ignored by filtering).\n", "rc": 5}


But: /dev/sdb exists on all hosts

[root@hv1 ~]# lsblk
NAME MAJ:MIN RM   SIZE RO 
TYPE  MOUNTPOINT
sda8:00 136,7G  0 
disk
...
sdb8:16   0 558,9G  0 
disk
└─3600508b1001c350a2c1748b0a0ff3860  253:50 558,9G  0 
mpath



What can i do to make this work?

___
Oliver Dietzel


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Hi Oliver,

   I see that multipath is enabled on your system and for the device sdb it creates 
mpath and once this is created system will identify sdb as 
"3600508b1001c350a2c1748b0a0ff3860". To make this work perform the steps below.

1) multipath -l (to list all multipath devices)

2) black list devices in /etc/multipath.conf by adding the lines below, if you 
do not see this file run the command 

Re: [ovirt-users] problems with events.list

[Fabrice Bacchella]

Ok, got it. The good syntax is host.name=ng319 and type=885 or type=839 or 
type=886 or type=887. 

Using the search bar (thanks Ondra), it easier to test.


> Le 3 mai 2017 à 13:06, Fabrice Bacchella  a 
> écrit :
> 
> I'm looking for some specific events with the following code:
> 
>last_event = int(events_service.list(max=1)[0].id)
>print "last_event %d" % last_event
>
>start an check upgrade
>
> 
>print "search %s" % search
>while True:
>founds = events_service.list(
>from_= last_event + 1,
>search=search,
>)
>if len(founds) > 0:
>break
>time.sleep(wait)
> 
> 
> If search is host.name=..., it works.
> With search host.id=..., it can't find any events.
> 
> I was unable to find a filter for the events :
> host.name=XXX and (type=885 or type=839 or type=886 or type=887)
> host.name=XXX and (code=885 or code=839 or code=886 or code=887)
> host.name=XXX and type=885 or type=839 or type=886 or type=887
> host.name=XXX and code=885 or code=839 or code=886 or code=887
> 
> What should be the right search string ?
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] problems with events.list

[Fabrice Bacchella]

I'm looking for some specific events with the following code:

last_event = int(events_service.list(max=1)[0].id)
print "last_event %d" % last_event

start an check upgrade


print "search %s" % search
while True:
founds = events_service.list(
from_= last_event + 1,
search=search,
)
if len(founds) > 0:
break
time.sleep(wait)


If search is host.name=..., it works.
With search host.id=..., it can't find any events.

I was unable to find a filter for the events :
host.name=XXX and (type=885 or type=839 or type=886 or type=887)
host.name=XXX and (code=885 or code=839 or code=886 or code=887)
host.name=XXX and type=885 or type=839 or type=886 or type=887
host.name=XXX and code=885 or code=839 or code=886 or code=887

What should be the right search string ?

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, existing disk sdb not found or filtered, deployment fails

[Oliver Dietzel]

Actual size as displayed by lsblk is 558,9G , a combined size of 530 GB worked 
(engine 100, data 180, vmstore 250),
but only without thin provisioning. Deployment failed with thin provisioning 
enabled, but worked with fixed sizes.

Now i hang in hosted engine deployment (having set installation with gluster to 
yes when asked) with error:

"Failed to execute stage 'Environment customization': Invalid value provided to 
'ENABLE_HC_GLUSTER_SERVICE' "



-Ursprüngliche Nachricht-
Von: knarra [mailto:kna...@redhat.com] 
Gesendet: Mittwoch, 3. Mai 2017 12:16
An: Oliver Dietzel ; 'users@ovirt.org' 
Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, 
existing disk sdb not found or filtered, deployment fails

On 05/03/2017 03:20 PM, Oliver Dietzel wrote:
> Thx a lot, i already got rid of the multipaths.
>
> Now 5 tries later i try to understand who disk space calc works.
>
> I already understand that the combined GByte limit for my drive sdb is around 
> 530.
>   
>> sdb8:16   0 558,9G  
>> 0 disk
> Now the thin pool creation kicks me! :)
>
> (i do a  vgremove gluster_vg_sdb on all hosts and reboot all three 
> hosts between retries)
>
> TASK [Create LVs with specified size for the VGs] 
> **
> failed: [hv1.iw.rto.de] (item={u'lv': u'gluster_thinpool_sdb', 
> u'size': u'530GB', u'extent': u'100%FREE', u'vg': u'gluster_vg_sdb'}) 
> => {"failed": true, "item": {"extent": "100%FREE", "lv": 
> "gluster_thinpool_sdb", "size": "530GB", "vg": "gluster_vg_sdb"}, 
> "msg": "  Insufficient suitable allocatable extents for logical volume 
> gluster_thinpool_sdb: 135680 more required\n", "rc": 5}
I think you should input the size as 500GB if your actual disk size is 530 ?
>
> -Ursprüngliche Nachricht-
> Von: knarra [mailto:kna...@redhat.com]
> Gesendet: Mittwoch, 3. Mai 2017 11:17
> An: Oliver Dietzel ; 'users@ovirt.org' 
> 
> Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on 
> gluster, existing disk sdb not found or filtered, deployment fails
>
> On 05/03/2017 02:06 PM, Oliver Dietzel wrote:
>> Hi,
>>
>> i try to set up a 3 node gluster based ovirt cluster, following this guide:
>> https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-
>> g
>> luster-storage/
>>
>> oVirt nodes were installed with all disks available in the system, 
>> installer limited to use only /dev/sda (both sda and sdb are HPE 
>> logical volumes on a p410 raid controller)
>>
>>
>> Glusterfs deployment fails in the last step before engine setup:
>>
>> PLAY RECAP 
>> *
>> hv1.iw  : ok=1changed=1unreachable=0failed=0
>> hv2.iw  : ok=1changed=1unreachable=0failed=0
>> hv3.iw  : ok=1changed=1unreachable=0failed=0
>>
>>
>> PLAY [gluster_servers]
>> *
>>
>> TASK [Clean up filesystem signature]
>> ***
>> skipping: [hv1.iw] => (item=/dev/sdb)
>> skipping: [hv2.iw] => (item=/dev/sdb)
>> skipping: [hv3.iw] => (item=/dev/sdb)
>>
>> TASK [Create Physical Volume]
>> **
>> failed: [hv3.iw] (item=/dev/sdb) => {"failed": true,
>> "failed_when_result": true, "item": "/dev/sdb", "msg": "  Device 
>> /dev/sdb not found (or ignored by filtering).\n", "rc": 5}
>> failed: [hv1.iw] (item=/dev/sdb) => {"failed": true,
>> "failed_when_result": true, "item": "/dev/sdb", "msg": "  Device 
>> /dev/sdb not found (or ignored by filtering).\n", "rc": 5}
>> failed: [hv2.iw] (item=/dev/sdb) => {"failed": true,
>> "failed_when_result": true, "item": "/dev/sdb", "msg": "  Device 
>> /dev/sdb not found (or ignored by filtering).\n", "rc": 5}
>>
>>
>> But: /dev/sdb exists on all hosts
>>
>> [root@hv1 ~]# lsblk
>> NAME MAJ:MIN RM   SIZE 
>> RO TYPE  MOUNTPOINT
>> sda8:00 136,7G  
>> 0 disk
>> ...
>> sdb8:16   0 558,9G  
>> 0 disk
>> └─3600508b1001c350a2c1748b0a0ff3860  253:50 558,9G  
>> 0 mpath
>>
>>
>>
>> What can i do to make this work?
>>
>> ___
>> Oliver Dietzel
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
> Hi Oliver,
>
>   I see that multipath is enabled on your system and for the device sdb 
> it creates mpath and once this is created system will identify sdb as 
> "3600508b1001c350a2c1748b0a0ff3860". To make this work perform the steps 
> below.
>
> 1) multipath -l (to list all multipath devices)
>
> 2) black list devices 

Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, existing disk sdb not found or filtered, deployment fails

[knarra]

On 05/03/2017 03:20 PM, Oliver Dietzel wrote:

Thx a lot, i already got rid of the multipaths.

Now 5 tries later i try to understand who disk space calc works.

I already understand that the combined GByte limit for my drive sdb is around 
530.
  

sdb8:16   0 558,9G  0 
disk

Now the thin pool creation kicks me! :)

(i do a  vgremove gluster_vg_sdb on all hosts and reboot all three hosts 
between retries)

TASK [Create LVs with specified size for the VGs] **
failed: [hv1.iw.rto.de] (item={u'lv': u'gluster_thinpool_sdb', u'size': u'530GB', u'extent': u'100%FREE', u'vg': u'gluster_vg_sdb'}) => {"failed": true, "item": {"extent": 
"100%FREE", "lv": "gluster_thinpool_sdb", "size": "530GB", "vg": "gluster_vg_sdb"}, "msg": "  Insufficient suitable allocatable 
extents for logical volume gluster_thinpool_sdb: 135680 more required\n", "rc": 5}

I think you should input the size as 500GB if your actual disk size is 530 ?


-Ursprüngliche Nachricht-
Von: knarra [mailto:kna...@redhat.com]
Gesendet: Mittwoch, 3. Mai 2017 11:17
An: Oliver Dietzel ; 'users@ovirt.org' 
Betreff: Re: [ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, 
existing disk sdb not found or filtered, deployment fails

On 05/03/2017 02:06 PM, Oliver Dietzel wrote:

Hi,

i try to set up a 3 node gluster based ovirt cluster, following this guide:
https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-g
luster-storage/

oVirt nodes were installed with all disks available in the system,
installer limited to use only /dev/sda (both sda and sdb are HPE
logical volumes on a p410 raid controller)


Glusterfs deployment fails in the last step before engine setup:

PLAY RECAP *
hv1.iw  : ok=1changed=1unreachable=0failed=0
hv2.iw  : ok=1changed=1unreachable=0failed=0
hv3.iw  : ok=1changed=1unreachable=0failed=0


PLAY [gluster_servers]
*

TASK [Clean up filesystem signature]
***
skipping: [hv1.iw] => (item=/dev/sdb)
skipping: [hv2.iw] => (item=/dev/sdb)
skipping: [hv3.iw] => (item=/dev/sdb)

TASK [Create Physical Volume]
**
failed: [hv3.iw] (item=/dev/sdb) => {"failed": true,
"failed_when_result": true, "item": "/dev/sdb", "msg": "  Device
/dev/sdb not found (or ignored by filtering).\n", "rc": 5}
failed: [hv1.iw] (item=/dev/sdb) => {"failed": true,
"failed_when_result": true, "item": "/dev/sdb", "msg": "  Device
/dev/sdb not found (or ignored by filtering).\n", "rc": 5}
failed: [hv2.iw] (item=/dev/sdb) => {"failed": true,
"failed_when_result": true, "item": "/dev/sdb", "msg": "  Device
/dev/sdb not found (or ignored by filtering).\n", "rc": 5}


But: /dev/sdb exists on all hosts

[root@hv1 ~]# lsblk
NAME MAJ:MIN RM   SIZE RO 
TYPE  MOUNTPOINT
sda8:00 136,7G  0 
disk
...
sdb8:16   0 558,9G  0 
disk
└─3600508b1001c350a2c1748b0a0ff3860  253:50 558,9G  0 
mpath



What can i do to make this work?

___
Oliver Dietzel


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Hi Oliver,

  I see that multipath is enabled on your system and for the device sdb it creates 
mpath and once this is created system will identify sdb as 
"3600508b1001c350a2c1748b0a0ff3860". To make this work perform the steps below.

1) multipath -l (to list all multipath devices)

2) black list devices in /etc/multipath.conf by adding the lines below, if you 
do not see this file run the command 'vdsm-tool configure --force' which will 
create the file for you.

blacklist {
  devnode "*"
}

3) mutipath -F which flushes all the mpath devices.

4) Restart mutipathd by running the command 'systemctl restart multipathd'

This should solve the issue.

Thanks
kasturi.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] install ovirt-engine

[Roy Golan]

http://www.ovirt.org/documentation/quickstart/quickstart-guide/#prerequisites

On Wed, May 3, 2017 at 1:01 PM Brahim Rifahi 
wrote:

> sudo yum install -y ovirt-engine
> You do not want to work
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] log out event but not log in?

[Gianluca Cecchi]

On Fri, Feb 24, 2017 at 5:28 PM, Gonzalo Rafuls  wrote:

>
> On Thu, Feb 23, 2017 at 8:51 AM, Yura Poltoratskiy 
> wrote:
>
>> I have the same issue since oVirt 4.0.x.
>>
>> 21.02.2017 10:28, Gianluca Cecchi пишет:
>>
>>> Hello,
>>> In oVirt 4.1 web admin gui I see events about users logging out (they
>>> have been created on internal domain with ovirt-aaa-jdbc-tool command),
>>> but I don't see the corresponding log in event.
>>> The same is true for the default admin@internal user.
>>> Is there any reason or is it a bug?
>>>
>>
> Looks like a bug to me. Raised [1] for it.
> Thanks for pointing that out!
>
> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1426715
>
> Cheers,
> Gonza.-
>
>
>>
>>>
I see that it is now in QA.
Is it possible to test against a running 4.1.1 or changes are too much?
>From reading the bugzilla I don't see a gerrit reference which files are
involved...

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Ovirt Node 4.1.1.1 installation, engine on gluster, existing disk sdb not found or filtered, deployment fails

[Oliver Dietzel]

Hi,

i try to set up a 3 node gluster based ovirt cluster, following this guide:
https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/

oVirt nodes were installed with all disks available in the system, installer 
limited to use only /dev/sda (both sda and sdb are HPE logical volumes on a 
p410 raid controller)


Glusterfs deployment fails in the last step before engine setup:

PLAY RECAP *
hv1.iw  : ok=1changed=1unreachable=0failed=0   
hv2.iw  : ok=1changed=1unreachable=0failed=0   
hv3.iw  : ok=1changed=1unreachable=0failed=0   


PLAY [gluster_servers] *

TASK [Clean up filesystem signature] ***
skipping: [hv1.iw] => (item=/dev/sdb) 
skipping: [hv2.iw] => (item=/dev/sdb) 
skipping: [hv3.iw] => (item=/dev/sdb) 

TASK [Create Physical Volume] **
failed: [hv3.iw] (item=/dev/sdb) => {"failed": true, "failed_when_result": 
true, "item": "/dev/sdb", "msg": "  Device /dev/sdb not found (or ignored by 
filtering).\n", "rc": 5}
failed: [hv1.iw] (item=/dev/sdb) => {"failed": true, "failed_when_result": 
true, "item": "/dev/sdb", "msg": "  Device /dev/sdb not found (or ignored by 
filtering).\n", "rc": 5}
failed: [hv2.iw] (item=/dev/sdb) => {"failed": true, "failed_when_result": 
true, "item": "/dev/sdb", "msg": "  Device /dev/sdb not found (or ignored by 
filtering).\n", "rc": 5}


But: /dev/sdb exists on all hosts

[root@hv1 ~]# lsblk
NAME MAJ:MIN RM   SIZE RO 
TYPE  MOUNTPOINT
sda8:00 136,7G  0 
disk
...
sdb8:16   0 558,9G  0 
disk
└─3600508b1001c350a2c1748b0a0ff3860  253:50 558,9G  0 
mpath



What can i do to make this work?

___
Oliver Dietzel


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Move direct LUN?

[gflwqs gflwqs]

Hi list!
I need to move a direct LUN from ISCSI storage to FC storage.
I have one ISCSI SAN and one FC SAN connected to my ovirt environment.
I need to migrate all my data from the ISCSI SAN to the FC SAN.
It is no problem to move the images from ISCSI to FC however i also have
direct LUN:s attached from the ISCSI SAN that i need to move to FC however
when i mark the direct LUN the "move" button is greyed out? How do i move
the direct LUN?

Regards
Christian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] VM Template Error

[Shahar Havivi]

its looks like vdsm complain that the image is not exists.
can you run the VM with no errors? (if the VM have more then one disk make
sure that its exists and accessible).

if all good please attach the full vdsm and engine log.

 Shahar.

On Tue, May 2, 2017 at 6:29 PM, Bryan Sockel  wrote:

> Hi,
>
> Having an issue a template from a VM's.
>
> I am getting the following errors:
> engine.log
> 2017-05-02 09:40:10,059-05 INFO  [org.ovirt.engine.core.dal.
> dbbroker.auditloghandling.AuditLogDirector] (default task-24) [2ef2fce]
> EVENT_ID: USER_ADD_VM_TEMPLATE(48), Correlation ID: 
> 176fdfa7-0467-48f5-9ecc-901e86768c28,
> Job ID: fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom
> Event ID: -1, Message: Creation of Template test from VM
> Windows-10-Template was initiated by admin@internal-authz.
>
> 2017-05-02 09:48:43,059-05 ERROR [org.ovirt.engine.core.dal.
> dbbroker.auditloghandling.AuditLogDirector] 
> (org.ovirt.thread.pool-7-thread-20)
> [] EVENT_ID: USER_ADD_VM_TEMPLATE_FINISHED_FAILURE(52), Correlation ID:
> 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
> fed9a848-1971-495a-a391-be1fa4a67908,
> Call Stack: null, Custom Event ID: -1, Message: Failed to complete creation
> of Template test from VM Windows-10-Template.
>
> Events Log
> ID 10803 - VDSM command DeleteImageGroupVDS failed: Image does not exist
> in domain: u'image=6aa525ad-e7f1-432b-959a-2223f7e77083,
> domain=e371d380-7194-4950-b901-5f2aed5dfb35'
> ID 10802 - VDSM vm-host-colo-2 command HSMGetAllTasksStatusesVDS failed:
> low level Image copy failed
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users