[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread Gianluca Cecchi 
On Fri, Aug 24, 2018 at 6:50 AM Sahina Bose  wrote:

>
>
>>> I'm just trying it, after reverting to snapshot of my VM that should
>>> work as single host HCI node.
>>> So now no gluster configuration in place and second disk free to be
>>> configured by gui.
>>> I select now the right box of Hosted Engine Setup page, the one with
>>> "
>>> Hyperconverged
>>> Configure gluster storage and oVirt hosted engine
>>> "
>>> Then select "Start" button.
>>> In the new page I put the ip of second network adapter of host1 that I
>>> plan to use for gluster storage, but then I receive these warnings about
>>> host2 and host3, so that I cannot go ahead...
>>>
>>>
>>> https://drive.google.com/file/d/1mO02Lu57tHlc6O24H2uTv9JSn1hyTbub/view?usp=sharing
>>>
>>> What to do?
>>>
>>
>> Can you please open a bug against the cockpit HE wizard for that?
>>
>
>
> We do have to https://bugzilla.redhat.com/show_bug.cgi?id=1608660 and
> will be available in oVirt 4.2.6
>
>
Thanks.
Is there any consumable iso for ovirt node I can use to try and give
feedback?
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/SFNYJOCN6EQXYJB3D32GHZRUDIPPPYT3/

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread femi adegoke 
Sahina,

Is this fixed in RC2 4.2.6?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IVPFGSRRVNN6SZNKTW3YHNEKISX6AKEW/

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread Sahina Bose 
On Thu, Aug 23, 2018 at 10:18 PM, Simone Tiraboschi 
wrote:

>
>
> On Thu, Aug 23, 2018 at 4:58 PM Gianluca Cecchi 
> wrote:
>
>> On Thu, Aug 23, 2018 at 4:07 PM femi adegoke 
>> wrote:
>>
>>> Simone,
>>> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_
>>> node_hyperconverged/
>>>
>>> For single node hyperconverged, are you saying we can do the setup 100%
>>> from the Cockpit gui without the gdeploy config file??
>>>
>>
>> I'm just trying it, after reverting to snapshot of my VM that should work
>> as single host HCI node.
>> So now no gluster configuration in place and second disk free to be
>> configured by gui.
>> I select now the right box of Hosted Engine Setup page, the one with
>> "
>> Hyperconverged
>> Configure gluster storage and oVirt hosted engine
>> "
>> Then select "Start" button.
>> In the new page I put the ip of second network adapter of host1 that I
>> plan to use for gluster storage, but then I receive these warnings about
>> host2 and host3, so that I cannot go ahead...
>>
>> https://drive.google.com/file/d/1mO02Lu57tHlc6O24H2uTv9JSn1hyT
>> bub/view?usp=sharing
>>
>> What to do?
>>
>
> Can you please open a bug against the cockpit HE wizard for that?
>


We do have to https://bugzilla.redhat.com/show_bug.cgi?id=1608660 and will
be available in oVirt 4.2.6


>
>>
>> Thanks,
>> Gianluca
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
>> guidelines/
>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
>> message/G2LDJCNXIW3WBSO7RE2QDOI45FTDKOOA/
>>
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
> guidelines/
> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
> message/PLMIL45DNHAB3WOKUMCMVE66DH7NXYVF/
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JKJQFAMS7B4FYPLRAMXG4SR6FHNGHBKR/

[ovirt-users] Re: cannot migrate hosted engine to sandybridge hypervisor

2018-08-23 Thread Douglas Duckworth 
Rebooted the hosted engine VM

Migration now works

Guess that's needed after changing cluster CPU type

Thanks,

Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
1300 York - LC-502
E: d...@med.cornell.edu
O: 212-746-6305
F: 212-746-8690


On Thu, Aug 23, 2018 at 8:46 PM, Douglas Duckworth 
wrote:

> Hi
>
> I am unable to migrate to hypervisor that's sandy bridge CPU.
>
> The cluster supports CPUs that old.
>
> This is the message on host when migration fails:
>
> Aug 23 20:40:14 lyon vdsm[9648]: WARN Worker blocked:  name=periodic/1 running  action= object at 0x7f2f8054b310> at 0x7f2f8054b350> timeout=15, duration=15 at
> 0x7f2f8048d290> task#=79 at 0x7f2f80540490>, traceback:#012File:
> "/usr/lib64/python2.7/threading.py", line 785, in __bootstrap#012
> self.__bootstrap_inner()#012File: "/usr/lib64/python2.7/threading.py",
> line 812, in __bootstrap_inner#012  self.run()#012File:
> "/usr/lib64/python2.7/threading.py", line 765, in run#012
> self.__target(*self.__args, **self.__kwargs)#012File:
> "/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 194,
> in run#012  ret = func(*args, **kwargs)#012File: 
> "/usr/lib/python2.7/site-packages/vdsm/executor.py",
> line 301, in _run#012  self._execute_task()#012File:
> "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in
> _execute_task#012  task()#012File: 
> "/usr/lib/python2.7/site-packages/vdsm/executor.py",
> line 391, in __call__#012  self._callable()#012File:
> "/usr/lib/python2.7/site-packages/vdsm/virt/periodic.py", line 220, in
> __call__#012  self._func()#012File: "/usr/lib/python2.7/site-
> packages/vdsm/virt/sampling.py", line 580, in __call__#012  stats =
> hostapi.get_stats(self._cif, self._samples.stats())#012File:
> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 77, in
> get_stats#012  ret['haStats'] = _getHaInfo()#012File:
> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 182, in
> _getHaInfo#012  stats = instance.get_all_stats()#012File:
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
> line 94, in get_all_stats#012  stats = 
> broker.get_stats_from_storage()#012File:
> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
> line 135, in get_stats_from_storage#012  result = 
> self._proxy.get_stats()#012File:
> "/usr/lib64/python2.7/xmlrpclib.py", line 1233, in __call__#012  return
> self.__send(self.__name, args)#012File: "/usr/lib64/python2.7/xmlrpclib.py",
> line 1591, in __request#012  verbose=self.__verbose#012File:
> "/usr/lib64/python2.7/xmlrpclib.py", line 1273, in request#012  return
> self.single_request(host, handler, request_body, verbose)#012File:
> "/usr/lib64/python2.7/xmlrpclib.py", line 1303, in single_request#012
> response = h.getresponse(buffering=True)#012File:
> "/usr/lib64/python2.7/httplib.py", line 1113, in getresponse#012
> response.begin()#012File: "/usr/lib64/python2.7/httplib.py", line 444, in
> begin#012  version, status, reason = self._read_status()#012File:
> "/usr/lib64/python2.7/httplib.py", line 400, in _read_status#012  line =
> self.fp.readline(_MAXLINE + 1)#012File: "/usr/lib64/python2.7/socket.py",
> line 476, in readline#012  data = self._sock.recv(self._rbufsize)
> Aug 23 20:43:45 lyon vdsm[9648]: WARN ping was deprecated in favor of
> ping2 and confirmConnectivity
> Aug 23 20:43:45 lyon vdsm[9648]: WARN Attempting to add an existing net
> user: ovirtmgmt/adf14389-1563-4b1a-9af6-4b40370a825b
> Aug 23 20:43:46 lyon lldpad: recvfrom(Event interface): No buffer space
> available
> Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered blocking
> state
> Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered disabled
> state
> Aug 23 20:43:46 lyon kernel: device vnet0 entered promiscuous mode
> Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered blocking
> state
> Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered forwarding
> state
> Aug 23 20:43:46 lyon NetworkManager[1658]:   [1535071426.4326]
> manager: (vnet0): new Tun device (/org/freedesktop/
> NetworkManager/Devices/57)
> Aug 23 20:43:46 lyon NetworkManager[1658]:   [1535071426.4336]
> device (vnet0): state change: unmanaged -> unavailable (reason
> 'connection-assumed', sys-iface-state: 'external')
> Aug 23 20:43:46 lyon NetworkManager[1658]:   [1535071426.4341]
> device (vnet0): state change: unavailable -> disconnected (reason 'none',
> sys-iface-state: 'external')
> Aug 23 20:43:46 lyon dbus[1396]: [system] Activating via systemd: service
> name='org.freedesktop.machine1' unit='dbus-org.freedesktop.
> machine1.service'
> Aug 23 20:43:46 lyon systemd: Cannot add dependency job for unit
> lvm2-lvmetad.socket, ignoring: Unit is masked.
> Aug 23 20:43:46 lyon systemd: Starting Virtual Machine and Container
> Registration Service...
> Aug 23 20:43:46 lyon dbus[1396]: [system] Successfully activated service
> 'org.freedesktop.machine1'
> Aug 23 20:43:46 lyon

[ovirt-users] cannot migrate hosted engine to sandybridge hypervisor

2018-08-23 Thread Douglas Duckworth 
Hi

I am unable to migrate to hypervisor that's sandy bridge CPU.

The cluster supports CPUs that old.

This is the message on host when migration fails:

Aug 23 20:40:14 lyon vdsm[9648]: WARN Worker blocked:  at
0x7f2f8054b350> timeout=15, duration=15 at 0x7f2f8048d290> task#=79 at
0x7f2f80540490>, traceback:#012File: "/usr/lib64/python2.7/threading.py",
line 785, in __bootstrap#012  self.__bootstrap_inner()#012File:
"/usr/lib64/python2.7/threading.py", line 812, in __bootstrap_inner#012
self.run()#012File: "/usr/lib64/python2.7/threading.py", line 765, in
run#012  self.__target(*self.__args, **self.__kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 194, in
run#012  ret = func(*args, **kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 301, in _run#012
self._execute_task()#012File:
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in
_execute_task#012  task()#012File:
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 391, in
__call__#012  self._callable()#012File:
"/usr/lib/python2.7/site-packages/vdsm/virt/periodic.py", line 220, in
__call__#012  self._func()#012File:
"/usr/lib/python2.7/site-packages/vdsm/virt/sampling.py", line 580, in
__call__#012  stats = hostapi.get_stats(self._cif,
self._samples.stats())#012File:
"/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 77, in
get_stats#012  ret['haStats'] = _getHaInfo()#012File:
"/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 182, in
_getHaInfo#012  stats = instance.get_all_stats()#012File:
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 94, in get_all_stats#012  stats =
broker.get_stats_from_storage()#012File:
"/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py",
line 135, in get_stats_from_storage#012  result =
self._proxy.get_stats()#012File: "/usr/lib64/python2.7/xmlrpclib.py", line
1233, in __call__#012  return self.__send(self.__name, args)#012File:
"/usr/lib64/python2.7/xmlrpclib.py", line 1591, in __request#012
verbose=self.__verbose#012File: "/usr/lib64/python2.7/xmlrpclib.py", line
1273, in request#012  return self.single_request(host, handler,
request_body, verbose)#012File: "/usr/lib64/python2.7/xmlrpclib.py", line
1303, in single_request#012  response =
h.getresponse(buffering=True)#012File: "/usr/lib64/python2.7/httplib.py",
line 1113, in getresponse#012  response.begin()#012File:
"/usr/lib64/python2.7/httplib.py", line 444, in begin#012  version, status,
reason = self._read_status()#012File: "/usr/lib64/python2.7/httplib.py",
line 400, in _read_status#012  line = self.fp.readline(_MAXLINE +
1)#012File: "/usr/lib64/python2.7/socket.py", line 476, in readline#012
data = self._sock.recv(self._rbufsize)
Aug 23 20:43:45 lyon vdsm[9648]: WARN ping was deprecated in favor of ping2
and confirmConnectivity
Aug 23 20:43:45 lyon vdsm[9648]: WARN Attempting to add an existing net
user: ovirtmgmt/adf14389-1563-4b1a-9af6-4b40370a825b
Aug 23 20:43:46 lyon lldpad: recvfrom(Event interface): No buffer space
available
Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered blocking state
Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered disabled state
Aug 23 20:43:46 lyon kernel: device vnet0 entered promiscuous mode
Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered blocking state
Aug 23 20:43:46 lyon kernel: ovirtmgmt: port 2(vnet0) entered forwarding
state
Aug 23 20:43:46 lyon NetworkManager[1658]:   [1535071426.4326]
manager: (vnet0): new Tun device
(/org/freedesktop/NetworkManager/Devices/57)
Aug 23 20:43:46 lyon NetworkManager[1658]:   [1535071426.4336] device
(vnet0): state change: unmanaged -> unavailable (reason
'connection-assumed', sys-iface-state: 'external')
Aug 23 20:43:46 lyon NetworkManager[1658]:   [1535071426.4341] device
(vnet0): state change: unavailable -> disconnected (reason 'none',
sys-iface-state: 'external')
Aug 23 20:43:46 lyon dbus[1396]: [system] Activating via systemd: service
name='org.freedesktop.machine1' unit='dbus-org.freedesktop.machine1.service'
Aug 23 20:43:46 lyon systemd: Cannot add dependency job for unit
lvm2-lvmetad.socket, ignoring: Unit is masked.
Aug 23 20:43:46 lyon systemd: Starting Virtual Machine and Container
Registration Service...
Aug 23 20:43:46 lyon dbus[1396]: [system] Successfully activated service
'org.freedesktop.machine1'
Aug 23 20:43:46 lyon systemd: Started Virtual Machine and Container
Registration Service.
Aug 23 20:43:46 lyon systemd-machined: New machine qemu-2-HostedEngine.
Aug 23 20:43:46 lyon systemd: Started Virtual Machine qemu-2-HostedEngine.
Aug 23 20:43:46 lyon systemd: Starting Virtual Machine qemu-2-HostedEngine.
Aug 23 20:43:46 lyon kvm: 1 guest now active
Aug 23 20:43:46 lyon libvirtd: 2018-08-24 00:43:46.940+: 9195:
error : *virCPUx86UpdateLive:2742
: operation failed: guest CPU doesn't match specification: missing
features:

[ovirt-users] Re: Update disk alias by using ovirtsdk4

2018-08-23 Thread branimirp 
Hi Fred!

Thank you very much for your help! It is working!

I only added the following (as suggested in 
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/pdf/python_sdk_guide/Red_Hat_Virtualization-4.2-Python_SDK_Guide-en-US.pdf;
 page 12) in order to wait for a vm to go from "image locked" to "down" state.

vm_service = vms_service.vm_service(vm.id)

while True:
time.sleep(5)
vm_s = vm_service.get()
if vm_s.status == types.VmStatus.DOWN:
break

Thank you once more!

Regards,

Branimir


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XSEF6RKBWNID7IBCN5AD6BTWLYMI4LWA/

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread Simone Tiraboschi 
On Thu, Aug 23, 2018 at 4:58 PM Gianluca Cecchi 
wrote:

> On Thu, Aug 23, 2018 at 4:07 PM femi adegoke 
> wrote:
>
>> Simone,
>>
>> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node_hyperconverged/
>>
>> For single node hyperconverged, are you saying we can do the setup 100%
>> from the Cockpit gui without the gdeploy config file??
>>
>
> I'm just trying it, after reverting to snapshot of my VM that should work
> as single host HCI node.
> So now no gluster configuration in place and second disk free to be
> configured by gui.
> I select now the right box of Hosted Engine Setup page, the one with
> "
> Hyperconverged
> Configure gluster storage and oVirt hosted engine
> "
> Then select "Start" button.
> In the new page I put the ip of second network adapter of host1 that I
> plan to use for gluster storage, but then I receive these warnings about
> host2 and host3, so that I cannot go ahead...
>
>
> https://drive.google.com/file/d/1mO02Lu57tHlc6O24H2uTv9JSn1hyTbub/view?usp=sharing
>
> What to do?
>

Can you please open a bug against the cockpit HE wizard for that?


>
> Thanks,
> Gianluca
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/G2LDJCNXIW3WBSO7RE2QDOI45FTDKOOA/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PLMIL45DNHAB3WOKUMCMVE66DH7NXYVF/

[ovirt-users] Re: losing ib0 connection after activating host

2018-08-23 Thread Douglas Duckworth 
Hi Dominik

Yes, the network-script was created by our Ansible role that deploys CentOS
hosts.  It pulls the IP from DNS then templates the script and copies to
host.

I will try this oVirt step then see if it works!

Thanks,

Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
1300 York - LC-502
E: d...@med.cornell.edu
O: 212-746-6305
F: 212-746-8690


On Thu, Aug 23, 2018 at 11:09 AM, Dominik Holler  wrote:

> Is ifcfg-ib0 created before adding the host?
> Can ib0 be reconfigured using engine, e.g. by
> "Compute > Hosts > hostx > Network Interfaces > Setup Host Networks"?
> If this some kind of self-hosted engine?
>
> On Thu, 23 Aug 2018 09:30:59 -0400
> Douglas Duckworth  wrote:
>
> > Here's a link to the files:
> >
> > https://urldefense.proofpoint.com/v2/url?u=https-3A__bit.ly_
> 2wjZ6Vo=DwICAg=lb62iw4YL4RFalcE2hQUQealT9-RXrryqt9KZX2qu2s=2Fzhh_
> 78OGspKQpl_e-CbhH6xUjnRkaqPFUS2wTJ2cw=Y25-OOvgu58jlC82-
> fzBeNIpQ7ZscoHznffUhqE6EBM=QQXlC9Tisa60TvimyS3BnFDCaDF7VP
> D8eCzT-Fke-p0=
> >
> > Thank you!
> >
> > Thanks,
> >
> > Douglas Duckworth, MSc, LFCS
> > HPC System Administrator
> > Scientific Computing Unit
> > Weill Cornell Medicine
> > 1300 York - LC-502
> > E: d...@med.cornell.edu
> > O: 212-746-6305
> > F: 212-746-8690
> >
> >
> > On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler 
> > wrote:
> >
> > > Would you please share the vdsm.log and the supervdsm.log from this
> > > host?
> > >
> > > On Wed, 22 Aug 2018 11:36:09 -0400
> > > Douglas Duckworth  wrote:
> > >
> > > > Hi
> > > >
> > > > I keep losing ib0 connection on hypervisor after adding host to
> > > > engine. This makes the host not really work since NFS will be
> > > > mounted over ib0.
> > > >
> > > > I don't really understand why this occurs.
> > > >
> > > > OS:
> > > >
> > > > [root@ovirt-hv2 ~]# cat /etc/redhat-release
> > > > CentOS Linux release 7.5.1804 (Core)
> > > >
> > > > Here's the network script:
> > > >
> > > > [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0
> > > > DEVICE=ib0
> > > > BOOTPROTO=static
> > > > IPADDR=172.16.0.207
> > > > NETMASK=255.255.255.0
> > > > ONBOOT=yes
> > > > ZONE=public
> > > >
> > > > When I try "ifup"
> > > >
> > > > [root@ovirt-hv2 ~]# ifup ib0
> > > > Error: Connection activation failed: No suitable device found for
> > > > this connection.
> > > >
> > > > The error in syslog:
> > > >
> > > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87
> > > > from 172.16.0.49, on dev ib0
> > > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: 
> > > > [1534951913.7486] audit: op="connection-activate"
> > > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0"
> > > > result="fail" reason="No suitable device found for this
> > > > connection.
> > > >
> > > > As you can see media state up:
> > > >
> > > > [root@ovirt-hv2 ~]# ip a
> > > > 1: lo:  mtu 65536 qdisc noqueue state
> > > > UNKNOWN group default qlen 1000
> > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > > > inet 127.0.0.1/8 scope host lo
> > > >valid_lft forever preferred_lft forever
> > > > 2: em1:  mtu 1500 qdisc mq master
> > > > ovirtmgmt state UP group default qlen 1000
> > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> > > > 3: em2:  mtu 1500 qdisc mq
> > > > state DOWN group default qlen 1000
> > > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff
> > > > 4: p1p1:  mtu 1500 qdisc mq
> > > > state DOWN group default qlen 1000
> > > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff
> > > > 5: p1p2:  mtu 1500 qdisc mq
> > > > state DOWN group default qlen 1000
> > > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff
> > > > 6: idrac:  mtu 1500 qdisc
> > > > pfifo_fast state UNKNOWN group default qlen 1000
> > > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff
> > > > inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac
> > > >valid_lft forever preferred_lft forever
> > > > 7: ib0:  mtu 2044 qdisc mq state
> > > > UP group default qlen 256
> > > > link/infiniband
> > > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd
> > > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
> > > > 8: ovs-system:  mtu 1500 qdisc noop state
> > > > DOWN group default qlen 1000
> > > > link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff
> > > > 9: br-int:  mtu 1500 qdisc noop state DOWN
> > > > group default qlen 1000
> > > > link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff
> > > > 25: ovirtmgmt:  mtu 1500 qdisc
> > > > noqueue state UP group default qlen 1000
> > > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> > > > inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt
> > > >valid_lft forever preferred_lft forever
> > > > 26: genev_sys_6081:  mtu 65000
> > > > qdisc noqueue master ovs-system state UNKNOWN group default qlen
> > > > 1000 link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff
> > > > 27:

[ovirt-users] Re: losing ib0 connection after activating host

2018-08-23 Thread Dominik Holler 
Is ifcfg-ib0 created before adding the host?
Can ib0 be reconfigured using engine, e.g. by
"Compute > Hosts > hostx > Network Interfaces > Setup Host Networks"?
If this some kind of self-hosted engine?

On Thu, 23 Aug 2018 09:30:59 -0400
Douglas Duckworth  wrote:

> Here's a link to the files:
> 
> https://bit.ly/2wjZ6Vo
> 
> Thank you!
> 
> Thanks,
> 
> Douglas Duckworth, MSc, LFCS
> HPC System Administrator
> Scientific Computing Unit
> Weill Cornell Medicine
> 1300 York - LC-502
> E: d...@med.cornell.edu
> O: 212-746-6305
> F: 212-746-8690
> 
> 
> On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler 
> wrote:
> 
> > Would you please share the vdsm.log and the supervdsm.log from this
> > host?
> >
> > On Wed, 22 Aug 2018 11:36:09 -0400
> > Douglas Duckworth  wrote:
> >  
> > > Hi
> > >
> > > I keep losing ib0 connection on hypervisor after adding host to
> > > engine. This makes the host not really work since NFS will be
> > > mounted over ib0.
> > >
> > > I don't really understand why this occurs.
> > >
> > > OS:
> > >
> > > [root@ovirt-hv2 ~]# cat /etc/redhat-release
> > > CentOS Linux release 7.5.1804 (Core)
> > >
> > > Here's the network script:
> > >
> > > [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0
> > > DEVICE=ib0
> > > BOOTPROTO=static
> > > IPADDR=172.16.0.207
> > > NETMASK=255.255.255.0
> > > ONBOOT=yes
> > > ZONE=public
> > >
> > > When I try "ifup"
> > >
> > > [root@ovirt-hv2 ~]# ifup ib0
> > > Error: Connection activation failed: No suitable device found for
> > > this connection.
> > >
> > > The error in syslog:
> > >
> > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87
> > > from 172.16.0.49, on dev ib0
> > > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: 
> > > [1534951913.7486] audit: op="connection-activate"
> > > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0"
> > > result="fail" reason="No suitable device found for this
> > > connection.
> > >
> > > As you can see media state up:
> > >
> > > [root@ovirt-hv2 ~]# ip a
> > > 1: lo:  mtu 65536 qdisc noqueue state
> > > UNKNOWN group default qlen 1000
> > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > > inet 127.0.0.1/8 scope host lo
> > >valid_lft forever preferred_lft forever
> > > 2: em1:  mtu 1500 qdisc mq master
> > > ovirtmgmt state UP group default qlen 1000
> > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> > > 3: em2:  mtu 1500 qdisc mq
> > > state DOWN group default qlen 1000
> > > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff
> > > 4: p1p1:  mtu 1500 qdisc mq
> > > state DOWN group default qlen 1000
> > > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff
> > > 5: p1p2:  mtu 1500 qdisc mq
> > > state DOWN group default qlen 1000
> > > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff
> > > 6: idrac:  mtu 1500 qdisc
> > > pfifo_fast state UNKNOWN group default qlen 1000
> > > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff
> > > inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac
> > >valid_lft forever preferred_lft forever
> > > 7: ib0:  mtu 2044 qdisc mq state
> > > UP group default qlen 256
> > > link/infiniband
> > > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd
> > > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
> > > 8: ovs-system:  mtu 1500 qdisc noop state
> > > DOWN group default qlen 1000
> > > link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff
> > > 9: br-int:  mtu 1500 qdisc noop state DOWN
> > > group default qlen 1000
> > > link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff
> > > 25: ovirtmgmt:  mtu 1500 qdisc
> > > noqueue state UP group default qlen 1000
> > > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> > > inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt
> > >valid_lft forever preferred_lft forever
> > > 26: genev_sys_6081:  mtu 65000
> > > qdisc noqueue master ovs-system state UNKNOWN group default qlen
> > > 1000 link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff
> > > 27: ;vdsmdummy;:  mtu 1500 qdisc noop state
> > > DOWN group default qlen 1000
> > > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff
> > >
> > > The card is FDR:
> > >
> > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox
> > > 01:00.0 Network controller: Mellanox Technologies MT27500 Family
> > > [ConnectX-3]
> > > Subsystem: Mellanox Technologies Device 0051
> > >
> > > Latest OFED driver:
> > >
> > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status
> > >
> > >   HCA driver loaded
> > >
> > > Configured IPoIB devices:
> > > ib0
> > >
> > > Currently active IPoIB devices:
> > > ib0
> > > Configured Mellanox EN devices:
> > >
> > > Currently active Mellanox devices:
> > > ib0
> > >
> > > The following OFED modules are loaded:
> > >
> > >   rdma_ucm
> > >   rdma_cm
> > >   ib_ipoib
> > >   mlx4_core
> > >   mlx4_ib
> > >   mlx4_en
> > >   mlx5_core
> > >   mlx5_ib
> > >   ib_uverbs
> > >   ib_umad
> > >   ib_ucm
> > >   ib_cm
> > >

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread Gianluca Cecchi 
On Thu, Aug 23, 2018 at 4:07 PM femi adegoke 
wrote:

> Simone,
>
> https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node_hyperconverged/
>
> For single node hyperconverged, are you saying we can do the setup 100%
> from the Cockpit gui without the gdeploy config file??
>

I'm just trying it, after reverting to snapshot of my VM that should work
as single host HCI node.
So now no gluster configuration in place and second disk free to be
configured by gui.
I select now the right box of Hosted Engine Setup page, the one with
"
Hyperconverged
Configure gluster storage and oVirt hosted engine
"
Then select "Start" button.
In the new page I put the ip of second network adapter of host1 that I plan
to use for gluster storage, but then I receive these warnings about host2
and host3, so that I cannot go ahead...

https://drive.google.com/file/d/1mO02Lu57tHlc6O24H2uTv9JSn1hyTbub/view?usp=sharing

What to do?

Thanks,
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G2LDJCNXIW3WBSO7RE2QDOI45FTDKOOA/

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread femi adegoke 
Simone,
https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Single_node_hyperconverged/

For single node hyperconverged, are you saying we can do the setup 100% from 
the Cockpit gui without the gdeploy config file??

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GXLABRLZ42WFDBZOYTRKMNCLOR4LAJVB/

[ovirt-users] Re: Data Center non-responsive, storage not loading, and psql errors after importing an ova

2018-08-23 Thread Fred Rolland 
Can you provide the content of the table "storage_domains" from the
database?


On Thu, Aug 23, 2018 at 10:44 AM, Sandro Bonazzola 
wrote:

> Michal, Tal, can you please have a look?
>
> 2018-08-22 2:54 GMT+02:00 :
>
>> I still havn't found a solution to this issue, but it was requested that
>> I post my engine.log and vdsm.log files. You can find a copy of my
>> engine.log here: https://git.nightscapetech.com
>> /uploads/-/system/personal_snippet/1/baddae4e4cdc787d6f13363
>> eb4657350/engine.log and my vdsm.log here: https://git.nightscapetech.com
>> /uploads/-/system/personal_snippet/1/e43cf9648a138b717343add
>> a3c02b594/vdsm.log
>>
>> Thank you.
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: https://www.ovirt.org/communit
>> y/about/community-guidelines/
>> List Archives: https://lists.ovirt.org/archiv
>> es/list/users@ovirt.org/message/CXSZGTKJXBQFZYHWWDRVCM2DYZUVRIA4/
>>
>
>
>
> --
>
> SANDRO BONAZZOLA
>
> MANAGER, SOFTWARE ENGINEERING, EMEA R RHV
>
> Red Hat EMEA 
>
> sbona...@redhat.com
> 
> 
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
> guidelines/
> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
> message/O2RTFLHVSEJFENGFG2NUO3NFYYY2UOIQ/
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UWW7FG5YE7DYYYTKLVBIDOEO4CCJBPZB/

[ovirt-users] Re: losing ib0 connection after activating host

2018-08-23 Thread Douglas Duckworth 
Here's a link to the files:

https://bit.ly/2wjZ6Vo

Thank you!

Thanks,

Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
1300 York - LC-502
E: d...@med.cornell.edu
O: 212-746-6305
F: 212-746-8690


On Thu, Aug 23, 2018 at 6:51 AM, Dominik Holler  wrote:

> Would you please share the vdsm.log and the supervdsm.log from this
> host?
>
> On Wed, 22 Aug 2018 11:36:09 -0400
> Douglas Duckworth  wrote:
>
> > Hi
> >
> > I keep losing ib0 connection on hypervisor after adding host to
> > engine. This makes the host not really work since NFS will be mounted
> > over ib0.
> >
> > I don't really understand why this occurs.
> >
> > OS:
> >
> > [root@ovirt-hv2 ~]# cat /etc/redhat-release
> > CentOS Linux release 7.5.1804 (Core)
> >
> > Here's the network script:
> >
> > [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0
> > DEVICE=ib0
> > BOOTPROTO=static
> > IPADDR=172.16.0.207
> > NETMASK=255.255.255.0
> > ONBOOT=yes
> > ZONE=public
> >
> > When I try "ifup"
> >
> > [root@ovirt-hv2 ~]# ifup ib0
> > Error: Connection activation failed: No suitable device found for this
> > connection.
> >
> > The error in syslog:
> >
> > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87
> > from 172.16.0.49, on dev ib0
> > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: 
> > [1534951913.7486] audit: op="connection-activate"
> > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0"
> > result="fail" reason="No suitable device found for this connection.
> >
> > As you can see media state up:
> >
> > [root@ovirt-hv2 ~]# ip a
> > 1: lo:  mtu 65536 qdisc noqueue state UNKNOWN
> > group default qlen 1000
> > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > inet 127.0.0.1/8 scope host lo
> >valid_lft forever preferred_lft forever
> > 2: em1:  mtu 1500 qdisc mq master
> > ovirtmgmt state UP group default qlen 1000
> > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> > 3: em2:  mtu 1500 qdisc mq state
> > DOWN group default qlen 1000
> > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff
> > 4: p1p1:  mtu 1500 qdisc mq state
> > DOWN group default qlen 1000
> > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff
> > 5: p1p2:  mtu 1500 qdisc mq state
> > DOWN group default qlen 1000
> > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff
> > 6: idrac:  mtu 1500 qdisc pfifo_fast
> > state UNKNOWN group default qlen 1000
> > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff
> > inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac
> >valid_lft forever preferred_lft forever
> > 7: ib0:  mtu 2044 qdisc mq state UP
> > group default qlen 256
> > link/infiniband
> > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd
> > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
> > 8: ovs-system:  mtu 1500 qdisc noop state DOWN
> > group default qlen 1000
> > link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff
> > 9: br-int:  mtu 1500 qdisc noop state DOWN group
> > default qlen 1000
> > link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff
> > 25: ovirtmgmt:  mtu 1500 qdisc
> > noqueue state UP group default qlen 1000
> > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> > inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt
> >valid_lft forever preferred_lft forever
> > 26: genev_sys_6081:  mtu 65000 qdisc
> > noqueue master ovs-system state UNKNOWN group default qlen 1000
> > link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff
> > 27: ;vdsmdummy;:  mtu 1500 qdisc noop state DOWN
> > group default qlen 1000
> > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff
> >
> > The card is FDR:
> >
> > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox
> > 01:00.0 Network controller: Mellanox Technologies MT27500 Family
> > [ConnectX-3]
> > Subsystem: Mellanox Technologies Device 0051
> >
> > Latest OFED driver:
> >
> > [root@ovirt-hv2 ~]# /etc/init.d/openibd status
> >
> >   HCA driver loaded
> >
> > Configured IPoIB devices:
> > ib0
> >
> > Currently active IPoIB devices:
> > ib0
> > Configured Mellanox EN devices:
> >
> > Currently active Mellanox devices:
> > ib0
> >
> > The following OFED modules are loaded:
> >
> >   rdma_ucm
> >   rdma_cm
> >   ib_ipoib
> >   mlx4_core
> >   mlx4_ib
> >   mlx4_en
> >   mlx5_core
> >   mlx5_ib
> >   ib_uverbs
> >   ib_umad
> >   ib_ucm
> >   ib_cm
> >   ib_core
> >   mlxfw
> >   mlx5_fpga_tools
> >
> > I can add an IP to ib0 using "ip addr" though I need Network Manager
> > to work with ib0.
> >
> >
> > Thanks,
> >
> > Douglas Duckworth, MSc, LFCS
> > HPC System Administrator
> > Scientific Computing Unit
> > Weill Cornell Medicine
> > 1300 York - LC-502
> > E: d...@med.cornell.edu
> > O: 212-746-6305
> > F: 212-746-8690
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:

[ovirt-users] Re: losing ib0 connection after activating host

2018-08-23 Thread Dominik Holler 
Would you please share the vdsm.log and the supervdsm.log from this
host?

On Wed, 22 Aug 2018 11:36:09 -0400
Douglas Duckworth  wrote:

> Hi
> 
> I keep losing ib0 connection on hypervisor after adding host to
> engine. This makes the host not really work since NFS will be mounted
> over ib0.
> 
> I don't really understand why this occurs.
> 
> OS:
> 
> [root@ovirt-hv2 ~]# cat /etc/redhat-release
> CentOS Linux release 7.5.1804 (Core)
> 
> Here's the network script:
> 
> [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0
> DEVICE=ib0
> BOOTPROTO=static
> IPADDR=172.16.0.207
> NETMASK=255.255.255.0
> ONBOOT=yes
> ZONE=public
> 
> When I try "ifup"
> 
> [root@ovirt-hv2 ~]# ifup ib0
> Error: Connection activation failed: No suitable device found for this
> connection.
> 
> The error in syslog:
> 
> Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87
> from 172.16.0.49, on dev ib0
> Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: 
> [1534951913.7486] audit: op="connection-activate"
> uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0"
> result="fail" reason="No suitable device found for this connection.
> 
> As you can see media state up:
> 
> [root@ovirt-hv2 ~]# ip a
> 1: lo:  mtu 65536 qdisc noqueue state UNKNOWN
> group default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
>valid_lft forever preferred_lft forever
> 2: em1:  mtu 1500 qdisc mq master
> ovirtmgmt state UP group default qlen 1000
> link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> 3: em2:  mtu 1500 qdisc mq state
> DOWN group default qlen 1000
> link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff
> 4: p1p1:  mtu 1500 qdisc mq state
> DOWN group default qlen 1000
> link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff
> 5: p1p2:  mtu 1500 qdisc mq state
> DOWN group default qlen 1000
> link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff
> 6: idrac:  mtu 1500 qdisc pfifo_fast
> state UNKNOWN group default qlen 1000
> link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff
> inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac
>valid_lft forever preferred_lft forever
> 7: ib0:  mtu 2044 qdisc mq state UP
> group default qlen 256
> link/infiniband
> a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd
> 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
> 8: ovs-system:  mtu 1500 qdisc noop state DOWN
> group default qlen 1000
> link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff
> 9: br-int:  mtu 1500 qdisc noop state DOWN group
> default qlen 1000
> link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff
> 25: ovirtmgmt:  mtu 1500 qdisc
> noqueue state UP group default qlen 1000
> link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
> inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt
>valid_lft forever preferred_lft forever
> 26: genev_sys_6081:  mtu 65000 qdisc
> noqueue master ovs-system state UNKNOWN group default qlen 1000
> link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff
> 27: ;vdsmdummy;:  mtu 1500 qdisc noop state DOWN
> group default qlen 1000
> link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff
> 
> The card is FDR:
> 
> [root@ovirt-hv2 ~]# lspci -v | grep Mellanox
> 01:00.0 Network controller: Mellanox Technologies MT27500 Family
> [ConnectX-3]
> Subsystem: Mellanox Technologies Device 0051
> 
> Latest OFED driver:
> 
> [root@ovirt-hv2 ~]# /etc/init.d/openibd status
> 
>   HCA driver loaded
> 
> Configured IPoIB devices:
> ib0
> 
> Currently active IPoIB devices:
> ib0
> Configured Mellanox EN devices:
> 
> Currently active Mellanox devices:
> ib0
> 
> The following OFED modules are loaded:
> 
>   rdma_ucm
>   rdma_cm
>   ib_ipoib
>   mlx4_core
>   mlx4_ib
>   mlx4_en
>   mlx5_core
>   mlx5_ib
>   ib_uverbs
>   ib_umad
>   ib_ucm
>   ib_cm
>   ib_core
>   mlxfw
>   mlx5_fpga_tools
> 
> I can add an IP to ib0 using "ip addr" though I need Network Manager
> to work with ib0.
> 
> 
> Thanks,
> 
> Douglas Duckworth, MSc, LFCS
> HPC System Administrator
> Scientific Computing Unit
> Weill Cornell Medicine
> 1300 York - LC-502
> E: d...@med.cornell.edu
> O: 212-746-6305
> F: 212-746-8690
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VQLZ6YQSGNFZSTLHQVKZAXQ2EYVKM7XY/

[ovirt-users] Re: Update disk alias by using ovirtsdk4

2018-08-23 Thread Fred Rolland 
Try to update the DiskAttachment:

vm = vms_service.list(search='name=NFSVM')[0]
disk_attachments_service = vms_service.vm_service(vm.id
).disk_attachments_service()

#here I take the first one, works because I have only one disk
disk_attachment = disk_attachments_service.list()[0]

disk_attachment_service = disk_attachments_service.attachment_service(
disk_attachment.id)

disk_attachment_service.update(
types.DiskAttachment(
disk=types.Disk(
name='NewDiskName',
),
),
)

On Thu, Aug 23, 2018 at 2:53 AM,  wrote:

> Hello list!
>
> I have been trying to rename a disk alias that defaults to
> "some_template_name-Disk1" to something more logical by using ovirtsdk4 (in
> my example to "vm2_disk_0"). On the list itself, I saw a couple of examples
> for older version of SDK. Basically, I am trying to create a VM and then
> update its properties, notably "alias" attribute that can be found in
> types.Disk. The first portion of the code works well (vm provisioning), but
> second one (alias update) does not, causing the TypeError exception.
> Obviously, I am doing something wrong here. I have spent most of the time
> trying to figure out how to actually do this. I would kindly ask for some
> hint.
>
> Thank you in advance!
>
> Regards,
>
> Branimir
>
> ***
>
> # create a vm
> vms_service = connection.system_service().vms_service()
>
> vms_service.add(
> types.Vm(
>
> # --- vm name
> name='vm2',
>
> # --- vCpus
> cpu=types.Cpu(
> topology=types.CpuTopology(cores=2, sockets=1)
> ),
>
> # --- memory
> memory = 512*1024*1024,
>
> # -- oVirt cluster
> cluster = types.Cluster(
> name='cluster_1',
> ),
>
> # -- template to use
> template = types.Template(
> name='centos7-tmplt-compute-node-v1'),
>
> # -- boot device
> os = types.OperatingSystem(boot=types.Boot(devices=[types.
> BootDevice.HD])),
> ),
> )
>
> # update the vm in terms of disk name
> vm = vms_service.list(search='name=vm2')[0]
> vm_service = vms_service.vm_service(vm.id)
>
> updated_vm = vm_service.update(
> types.Vm(
> disk_attachment = types.Disk(alias='vm2_disk_0')
> )
> )
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
> guidelines/
> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
> message/JWUFND4JXIJMZ4HY5LPBSKIBBN4GEL5V/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6NDRHVFQVNIUDCZYNTE5FUPZKUOMTW4Z/

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread Simone Tiraboschi 
On Thu, Aug 23, 2018 at 10:19 AM Gianluca Cecchi 
wrote:

> On Wed, Aug 22, 2018 at 5:44 PM Simone Tiraboschi 
> wrote:
>
>>
>>
>>> Thanks for the answer, Simone, but I have not understood.
>>> I used ovirt-node-ng-installer-ovirt-4.2-2018082006.iso to install the
>>> OS host node.
>>> Does this resemble what you call "new node zero deployment flow"?
>>> When connecting to cockpit and selecting hosted engine, I get this
>>> screen:
>>>
>>> https://drive.google.com/file/d/1aPLCm0KW5IIp6f7xr41cysckPkFgdHtJ/view?usp=sharing
>>>
>>> what to choose and if any particular setup needs?
>>> As I wrote, the command "gdeploy -c gdeploy.conf" completed without
>>> errors on the host and now I have the 3 (small, only to test the workflow
>>> for now) gluster volumes running
>>>
>>
>> Now you can simply continue with "Hosted Engine" button in cockpit.
>> You could also skip the manual execution of gdeploy from CLI and do
>> everything from cockpit with the "Hyperconverged" button but now you
>> already did it.
>>
>>
> Thanks for your time, Simone.
> The installation went ok until the problem below due to my engine gluster
> volume too small (I set up 60Gb for it and it didn't fit for some MBs..). I
> got:
>
> [ INFO ] TASK [Check storage domain free space]
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Error:
> the target storage domain contains only 59.0GiB of available space while a
> minimum of 60.0GiB is required If you wish to use the current target
> storage domain by extending it, make sure it contains nothing before adding
> it."}
>
> Then I scratched (it is a small nested test and so I simply discarded the
> changes) and updated gdeploy.conf to accomodate 65Gb for the engine gluster
> volume and all went pretty smooth then.
> I also noticed that the engine VM and its storage domain is already
> visible in web admin portal, so there is no immediate need to add another
> data domain and get hosted engine imported as before, correct?
>

Yes, as expected with the new flow.
Theoretically you can just end with a single SD for hosted-engine and
regular VMs but keep them distinct is highly recommended for
maitenability.


>
> I'm up and running and I'm going to scratch again and test your suggestion
> to bypass also the gdeploy.conf step and go all with gui.
> In fact I notice that when configuring storage there is a note saying
> "
> Please note that only replica 1 and replica 3 volumes are supported.
> "
>
> .. I'll let you know if it goes ok the all gui setup.
>
> In the mean time one further question: it seems that the cluster
> configured has not the "gluster service" checkbox enabled, so I think it is
> for that reason that I don't see any gluster related configuration
> information inside the web admin portal
> Is this expected with this approach?
> Is something different expected when trying instead the full gui approach?
> Will the web admin portal aware of the gluster config in that case?
>

Yes, in that case hosted-engine-setup will be aware of the hyperconverged
configuration and it will automatically configure the cluster for the
gluster server adding also the two additional hosts.


>
> Also because a further step I would like to try is to extend this initial
> setup to a 3-node based gluster one...
>
> Thanks again,
> Gianluca
>
>
>
>
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VQ5CKCPJ6SIONSWFB525M5L6R2RVXBBB/

[ovirt-users] Re: Info on HCI single host

2018-08-23 Thread Gianluca Cecchi 
On Wed, Aug 22, 2018 at 5:44 PM Simone Tiraboschi 
wrote:

>
>
>> Thanks for the answer, Simone, but I have not understood.
>> I used ovirt-node-ng-installer-ovirt-4.2-2018082006.iso to install the OS
>> host node.
>> Does this resemble what you call "new node zero deployment flow"?
>> When connecting to cockpit and selecting hosted engine, I get this screen:
>>
>> https://drive.google.com/file/d/1aPLCm0KW5IIp6f7xr41cysckPkFgdHtJ/view?usp=sharing
>>
>> what to choose and if any particular setup needs?
>> As I wrote, the command "gdeploy -c gdeploy.conf" completed without
>> errors on the host and now I have the 3 (small, only to test the workflow
>> for now) gluster volumes running
>>
>
> Now you can simply continue with "Hosted Engine" button in cockpit.
> You could also skip the manual execution of gdeploy from CLI and do
> everything from cockpit with the "Hyperconverged" button but now you
> already did it.
>
>
Thanks for your time, Simone.
The installation went ok until the problem below due to my engine gluster
volume too small (I set up 60Gb for it and it didn't fit for some MBs..). I
got:

[ INFO ] TASK [Check storage domain free space]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Error:
the target storage domain contains only 59.0GiB of available space while a
minimum of 60.0GiB is required If you wish to use the current target
storage domain by extending it, make sure it contains nothing before adding
it."}

Then I scratched (it is a small nested test and so I simply discarded the
changes) and updated gdeploy.conf to accomodate 65Gb for the engine gluster
volume and all went pretty smooth then.
I also noticed that the engine VM and its storage domain is already visible
in web admin portal, so there is no immediate need to add another data
domain and get hosted engine imported as before, correct?

I'm up and running and I'm going to scratch again and test your suggestion
to bypass also the gdeploy.conf step and go all with gui.
In fact I notice that when configuring storage there is a note saying
"
Please note that only replica 1 and replica 3 volumes are supported.
"

.. I'll let you know if it goes ok the all gui setup.

In the mean time one further question: it seems that the cluster configured
has not the "gluster service" checkbox enabled, so I think it is for that
reason that I don't see any gluster related configuration information
inside the web admin portal
Is this expected with this approach?
Is something different expected when trying instead the full gui approach?
Will the web admin portal aware of the gluster config in that case?

Also because a further step I would like to try is to extend this initial
setup to a 3-node based gluster one...

Thanks again,
Gianluca
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ATZ2DFKRLMDJCYNVEWU2FSKKJB2ZCSOK/

[ovirt-users] Re: ovirt-node-ng-image-update 4.2.4 to 4.2.5.1 fails

2018-08-23 Thread Misak A. Khachatryan 
Same to me from 4.1 times, don't know how to fix.

Best regards,
Misak Khachatryan,
Network Administration and
Monitoring Department Manager,

GNC- ALFA CJSC
1 Khaghaghutyan str., Abovyan, 2201 Armenia
Tel: +374 60 46 99 70 (9670),
Mob.: +374 93 19 98 40
URL:www.rtarmenia.am


On Sun, Aug 19, 2018 at 11:34 AM Glenn Farmer 
mailto:glenn.far...@netfortris.com>> wrote:
yum update ends with:

warning: %post(ovirt-node-ng-image-update-4.2.5.1-1.el7.noarch) scriptlet 
failed, exit status 1
Non-fatal POSTIN scriptlet failure in rpm package 
ovirt-node-ng-image-update-4.2.5.1-1.el7.noarch

It creates the layers:

ovirt-node-ng-4.2.5.1-0.20180731.0   onn Vri---tz-k  6.00g pool00
ovirt-node-ng-4.2.5.1-0.20180731.0+1 onn  Vwi-a-tz--  6.00g pool00 
ovirt-node-ng-4.2.5.1-0.20180731.0

But no grub2 boot entry.

nodectl info:

layers:
  ovirt-node-ng-4.2.4-0.20180626.0:
ovirt-node-ng-4.2.4-0.20180626.0+1
  ovirt-node-ng-4.2.5.1-0.20180731.0:
ovirt-node-ng-4.2.5.1-0.20180731.0+1
  ovirt-node-ng-4.2.2-0.20180405.0:
ovirt-node-ng-4.2.2-0.20180405.0+1
bootloader:
  default: ovirt-node-ng-4.2.4-0.20180626.0+1
  entries:
ovirt-node-ng-4.2.2-0.20180405.0+1:
  index: 1
  title: ovirt-node-ng-4.2.2-0.20180405.0+1
  kernel: 
/boot/ovirt-node-ng-4.2.2-0.20180405.0+1/vmlinuz-3.10.0-693.21.1.el7.x86_64
  args: "ro crashkernel=auto 
rd.lvm.lv=onn/ovirt-node-ng-4.2.2-0.20180405.0+1 
img.bootid=ovirt-node-ng-4.2.2-0.20180405.0+1"
  initrd: 
/boot/ovirt-node-ng-4.2.2-0.20180405.0+1/initramfs-3.10.0-693.21.1.el7.x86_64.img
  root: /dev/onn/ovirt-node-ng-4.2.2-0.20180405.0+1
ovirt-node-ng-4.2.4-0.20180626.0+1:
  index: 0
  title: ovirt-node-ng-4.2.4-0.20180626.0+1
  kernel: 
/boot/ovirt-node-ng-4.2.4-0.20180626.0+1/vmlinuz-3.10.0-862.3.3.el7.x86_64
  args: "ro crashkernel=auto 
rd.lvm.lv=onn/ovirt-node-ng-4.2.4-0.20180626.0+1 
img.bootid=ovirt-node-ng-4.2.4-0.20180626.0+1"
  initrd: 
/boot/ovirt-node-ng-4.2.4-0.20180626.0+1/initramfs-3.10.0-862.3.3.el7.x86_64.img
  root: /dev/onn/ovirt-node-ng-4.2.4-0.20180626.0+1
current_layer: ovirt-node-ng-4.2.4-0.20180626.0+1

Just posting for others that might have the same issue.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to 
users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VOTNR3NH3EAEW6YDINIILFVGQB2BX544/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LEU6Y4SD4YBR77P26J7ZGAPKBWBDTCOS/

[ovirt-users] Fwd: ovirt api vm snapshot cloning error

2018-08-23 Thread Avihai Efrat 
Hi Peter,

Would you mind reporting a bug on this issue you saw?
To me, it looks like sync/timing issue between snapshot state('OK)  and
disk state('Locked').

Can you also please check if the disk that is reported as locked is indeed
locked at the time the error is reported?
Please add this info to the bug and all relevant scripts.

As a workaround, please consider adding an additional wait for all the VM
disks to also reach 'OK' state.

Thanks,
Avihai




-- Forwarded message -
From: Peter Hudec 
Date: Wed, Aug 22, 2018, 01:33
Subject: [ovirt-users] ovirt api vm snapshot cloning error
To: users 


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512

Hi,

I'm trying to solve an issue described in
https://github.com/openbacchus/bacchus/issues/30.

Short description is
- - create snapshot
- - wait until the snapshot is OK
- - clone snapshot
- - got error: Fault reason is "Operation Failed". Fault detail is
"[Cannot add VM: The following disks are locked: ditlcm01_Disk1.
Please try again in a few minutes.]". HTTP response code is 409

To simulate the error I have combined the exampe scripts
- -
https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/clone
_vm_from_snapshot.py
- -
https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/add_v
m_snapshot.py

The full code is here: https://tools.apps.hudecof.net/paste/view/0319f4f
1

This code was working on 4.2.3 version. I skipped the 4.2.4, but n
4.2.5 is broken.

Any clue what's wrong?

regards
Peter

- --
*Peter Hudec*
Infraštruktúrny architekt
phu...@cnc.sk 

*CNC, a.s.*
Borská 6, 841 04 Bratislava

Recepcia: +421 2  35 000 100

Mobil:+421 905 997 203
*www.cnc.sk* 

-BEGIN PGP SIGNATURE-
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=cVTg
-END PGP SIGNATURE-
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
message/EPMEOT523Z7JXIUVO6BJSQOD4NYUBBQZ/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VFXGCVTU67VUGNOEWVXN2BW4USXZ5AXC/

[ovirt-users] Re: ovirt api vm snapshot cloning error

2018-08-23 Thread Avihai Efrat 
Hi Peter,

Would you mind reporting a bug on this issue you saw?
To me, it looks like sync/timing issue between snapshot state('OK)  and
disk state('Locked').

Can you also please check if the disk that is reported as locked is indeed
locked at the time the error is reported?
Please add this info to the bug and all relevant scripts.

As a workaround, please consider adding an additional wait for all the VM
disks to also reach 'OK' state.

Thanks,
Avihai


On Wed, Aug 22, 2018 at 10:01 AM, Raz Tamir  wrote:

> I have a feeling this is related to the issue we reviewed yesterday and,
> that we have a bug here
>
> Could you please take care of this?
>
> -- Forwarded message -
> From: Peter Hudec 
> Date: Wed, Aug 22, 2018, 01:33
> Subject: [ovirt-users] ovirt api vm snapshot cloning error
> To: users 
>
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> Hi,
>
> I'm trying to solve an issue described in
> https://github.com/openbacchus/bacchus/issues/30.
>
> Short description is
> - - create snapshot
> - - wait until the snapshot is OK
> - - clone snapshot
> - - got error: Fault reason is "Operation Failed". Fault detail is
> "[Cannot add VM: The following disks are locked: ditlcm01_Disk1.
> Please try again in a few minutes.]". HTTP response code is 409
>
> To simulate the error I have combined the exampe scripts
> - -
> https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/clone
> _vm_from_snapshot.py
> 
> - -
> https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/add_v
> m_snapshot.py
> 
>
> The full code is here: https://tools.apps.hudecof.net/paste/view/0319f4f
> 1
>
> This code was working on 4.2.3 version. I skipped the 4.2.4, but n
> 4.2.5 is broken.
>
> Any clue what's wrong?
>
> regards
> Peter
>
> - --
> *Peter Hudec*
> Infraštruktúrny architekt
> phu...@cnc.sk 
>
> *CNC, a.s.*
> Borská 6, 841 04 Bratislava
> 
> Recepcia: +421 2  35 000 100
>
> Mobil:+421 905 997 203
> *www.cnc.sk* 
>
> -BEGIN PGP SIGNATURE-
>
> iQIzBAEBCgAdFiEEqSUbhuEwhryifNeVQnvVWOJ35BAFAlt8kfIACgkQQnvVWOJ3
> 5BBMCQ//SkRDqG6Av15ZIbpAby3+Z7mYjxdW/chGjR5cgVNG7vmprJIz9Jo3EQLV
> mYCRj6XU9l6uFQ2WHtFbVKHlbcRl9Qw2a6nGFDRWvG7CCqStg5mmVhFo8fKNGIl8
> avjN9uaZqypIdJCB80tFnVEv4a5IWWJkAll3B8KKPAsIeYMNP+d/8D6AAunR6AKH
> kVft+mRBjlJUeYTe/QfeNW1J+JUCZd1Qd4A8h/E9B16Cc/8xfgr88uGUDqZCMgUc
> bQcW8CAfAHFq19mOjxBtmwjNtchcb5EUdCvZSYc34ujdZSU6v8GWPqnHVUnve4G0
> O0ZhOXKjUZS9FO7n7JrhkIwOwmMRqAaBiKYuVd8g+iib9z+Wlb9W3uZnll9Bik65
> UvSpl5Rp/Vy/Rx7GHpCn/TqIwnMppEF2Bp55ZGh77zM+Almy4PtGJp4py+FU8/4I
> wZ59bMgAgj4vquPWbtEP5QQtThucqpoJc+7wnHdhPFR3Ks+PTy4qkSgOnTr+lLbr
> yGvqZJEqwSH5Kga/5HyAb94ZikTC6zCLcuQur19TR+O2WnG3JFXEOSuumU59mIjs
> XelKHkvb5RhZ34w8mfGZM09MpWKyWCMjPQTLUABqzOaK6OHY5vku1RwKILSRjb3x
> tNCFCl9oqPPTQbiGq2+xT43KFtTvrmC17dshsLjUi97vKcSDe+I=
> =cVTg
> -END PGP SIGNATURE-
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/communit
> y/about/community-guidelines/
> List Archives: https://lists.ovirt.org/archiv
> es/list/users@ovirt.org/message/EPMEOT523Z7JXIUVO6BJSQOD4NYUBBQZ/
>



--
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MYS42EDLBK2TQDUOJJNZ5ZWECYSGQZ3C/

[ovirt-users] Re: HostedEngine cannot migrate to added hosts

2018-08-23 Thread Simone Tiraboschi 
Hi,
It seams that the configuration volume on your env is empty.

Can you please report the output of
  . /etc/ovirt-hosted-engine/hosted-engine.conf
  sudo -u vdsm dd
if=/var/run/vdsm/storage/${sdUUID}/${conf_image_UUID}/${conf_volume_UUID}
bs=20480 count=1  | tar -xOv hosted-engine.conf
executed on the first host?

Was the deployment successful till the end on the first host?

On Thu, Aug 23, 2018 at 9:46 AM Ariez Ahito 
wrote:

> engine.log
>
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XXPWI6VJFD5XV45X5VCUKBUGAHHPWFMT/

[ovirt-users] Re: Data Center non-responsive, storage not loading, and psql errors after importing an ova

2018-08-23 Thread Sandro Bonazzola 
Michal, Tal, can you please have a look?

2018-08-22 2:54 GMT+02:00 :

> I still havn't found a solution to this issue, but it was requested that I
> post my engine.log and vdsm.log files. You can find a copy of my engine.log
> here: https://git.nightscapetech.com/uploads/-/system/personal_snippet/1/
> baddae4e4cdc787d6f13363eb4657350/engine.log and my vdsm.log here:
> https://git.nightscapetech.com/uploads/-/system/personal_snippet/1/
> e43cf9648a138b717343adda3c02b594/vdsm.log
>
> Thank you.
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-
> guidelines/
> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/
> message/CXSZGTKJXBQFZYHWWDRVCM2DYZUVRIA4/
>



-- 

SANDRO BONAZZOLA

MANAGER, SOFTWARE ENGINEERING, EMEA R RHV

Red Hat EMEA 

sbona...@redhat.com


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/O2RTFLHVSEJFENGFG2NUO3NFYYY2UOIQ/

[ovirt-users] Re: Anyone have any luck with Bacchus?

2018-08-23 Thread Peter Hudec 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512

I disabled selinux completly, since all python packages are installed
system wide.

https://github.com/openbacchus/bacchus/pull/36

Your solution is metioned in the MR comment.

Peter

On 23/08/2018 06:54, Maton, Brett wrote:
> That should have been covered by the installer really, good to know
> that you found the issue though.
> 
> On 23 August 2018 at 04:13, Wesley Stewart  > wrote:
> 
> I'm an idiot, it was selinux
> 
> setsebool -P httpd_can_network_connect true
> 
> On Wed, Aug 22, 2018, 10:19 PM Wesley Stewart  > wrote:
> 
> I am trying to get Bacchus installed: 
> https://github.com/openbacchus/bacchus 
> 
> 
> It seems he has upgraded to installing via an ansible playbook. I
> can get this to run all the way through, hopefully NGINX either
> ends up responding with a "Gateway error" or it will give me the
> default nginx landing page.
> 
> I have tried with a RHEL7 and CentOS7 VM, as well as in a 
> CentOS\systemd docker container, all of which having about the same
> amount of luck.  I was just curious if anyone else has gotten this
> to work recently.
> 
> 
> ___ Users mailing list
> -- users@ovirt.org  To unsubscribe send an
> email to users-le...@ovirt.org  
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ 
>  oVirt Code of
> Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/ 
>  List
> Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/STC6P3SX
M6SQ4EYTWJJSEHY5WRPUWMOQ/
>
> 

> 
> 
> 
> 
> ___ Users mailing list
> -- users@ovirt.org To unsubscribe send an email to
> users-le...@ovirt.org Privacy Statement:
> https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/ List
> Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/UZ6WU7Y5
EWZHLMMIZAOT2VQ77V6TEULJ/
>
> 
- -- 
*Peter Hudec*
Infraštruktúrny architekt
phu...@cnc.sk 

*CNC, a.s.*
Borská 6, 841 04 Bratislava
Recepcia: +421 2  35 000 100

Mobil:+421 905 997 203
*www.cnc.sk* 

-BEGIN PGP SIGNATURE-
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=detf
-END PGP SIGNATURE-
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2VFIZNY6WTTJKRDMWACEDJDN2RFB34XK/

[ovirt-users] Re: Anyone have any luck with Bacchus?

2018-08-23 Thread Peter Hudec 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512

Hi,

I'm using it, but it's far from the production;( but for manual
cloning the VM it's good.

Righ now there at least 2 bug openend

https://github.com/openbacchus/bacchus/issues/35
Certificate on the  https://openbacchus.com is expired, but you could
simoy comment that part in installation playbook.

https://github.com/openbacchus/bacchus/issues/30
The backup on 4.2.5 do not work. We have also patch,I need to submit MR.


Peter

On 23/08/2018 05:13, Wesley Stewart wrote:
> I'm an idiot, it was selinux
> 
> setsebool -P httpd_can_network_connect true
> 
> On Wed, Aug 22, 2018, 10:19 PM Wesley Stewart  > wrote:
> 
> I am trying to get Bacchus installed: 
> https://github.com/openbacchus/bacchus
> 
> It seems he has upgraded to installing via an ansible playbook.  I 
> can get this to run all the way through, hopefully NGINX either
> ends up responding with a "Gateway error" or it will give me the
> default nginx landing page.
> 
> I have tried with a RHEL7 and CentOS7 VM, as well as in a 
> CentOS\systemd docker container, all of which having about the
> same amount of luck.  I was just curious if anyone else has gotten
> this to work recently.
> 
> 
> 
> ___ Users mailing list
> -- users@ovirt.org To unsubscribe send an email to
> users-le...@ovirt.org Privacy Statement:
> https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/ List
> Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/STC6P3SX
M6SQ4EYTWJJSEHY5WRPUWMOQ/
>
> 
- -- 
*Peter Hudec*
Infraštruktúrny architekt
phu...@cnc.sk 

*CNC, a.s.*
Borská 6, 841 04 Bratislava
Recepcia: +421 2  35 000 100

Mobil:+421 905 997 203
*www.cnc.sk* 

-BEGIN PGP SIGNATURE-
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=Qf/k
-END PGP SIGNATURE-
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VTOIJ3FMLFOFV724ORSAXTEKLRBKMA5C/