Re: [vdr] open dvb-s2 channel on Hotbird - Eur osport HD Promo
On Tuesday 20 of May 2008, Gregoire Favre wrote: My CPU (P-4 3Ghz) is very slow for 1080x1920, but I could see the tennis on this channel one hour ago Oh nice, mine should be powerfull enough, but I stay for quiete a long time under ESP HD Intl and it stay black... what's strange is that my VDR isn't able to tune to those, I can't get a lock : May 20 23:05:59 vdr vdr: [19468] frontend 1 timed out while tuning to channel 6511, tp 211278 May 20 23:07:09 vdr vdr: [19468] frontend 1 timed out while tuning to channel 6511, tp 211278 Maybe they don't broadcast now ? Don't you have TT S2-3200 or SkystarHD? The problem is in driver (multiproto) for those cards. I and Gregorie have the hvr4000 cards with the same version of multiproto_plus + hvr4000 patch. @Gregoire could you check your hvr4000 patch, because was the report about missing _set_delsys call in your second patch from 2 May. http://www.linuxtv.org/pipermail/vdr/2008-May/016893.html Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] no channel update on vdr 1.7.0
Hello, I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available). The log doesnt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? thanks for your help sp ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver do you use the latest multiproto's version ? and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder how did you start the scanning on vdr ? I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? there's reelchannelscan plugin 0.4.1 It works with dvb-s channels on vdr170 , not with dvb-s2. -how can I check the signal on my S2-3200 card ? femon-plugin will helpto you -how can I reduce the logs from stb6100 ? have a look on verbose option for stb6100 module - modinfo stb6100 -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? which patch do you mean ? Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
[EMAIL PROTECTED] schrieb: Hello, I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a “clean” vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on “add new transponder” I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as “channel not available”). The log does’nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the “autoscan” not working ? Do I need some “transponder file” ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? thanks for your help sp ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? AFAIk this will NOT work. if vdr has 2 cards, it only uses the second card to do channel-scan, it does not know these two cards are hardwired to different sat-positions, and i know of now way to tell it about such a confguration. Is this correct Klaus? Christoph ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? no, he has one FF card, second one is budget card TT3200 Igor AFAIk this will NOT work. if vdr has 2 cards, it only uses the second card to do channel-scan, it does not know these two cards are hardwired to different sat-positions, and i know of now way to tell it about such a confguration. Is this correct Klaus? Christoph ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Igor schrieb: I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? no, he has one FF card, second one is budget card TT3200 Igor Ok, but this does not make any difference in this situation, it will plain NOT work, as long as each card is hard-wired to only one of the LNBs. To get channelsacn working he will have to patch vdr (probably by himself) or get at least one switch to get both satelites to both of his cards. Christoph AFAIk this will NOT work. if vdr has 2 cards, it only uses the second card to do channel-scan, it does not know these two cards are hardwired to different sat-positions, and i know of now way to tell it about such a confguration. Is this correct Klaus? Christoph ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] VDR EPG (satellite) : compensating datas ?
Hi, I was wondering if there was a way to compensate the lack of EPG (satellite) datas on some channels. I'm on ASTRA 19.2. Thanks, regards Pierre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Klaus Schmidinger wrote : Plain vanilly VDR assumes that every DVB-S card can receive all satellites. Klaus I hope this will be configurable in VDR 1.8 ! The LNB type should also be configurable for each DVB card (I am still using a Full-band LNB on my motorized dish). ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
I would suggest to start vdr up with only one device at at time (by using the command line parameter to a fixed dvb card) and then use the channel scan plugin, repeat this for each device. This will surely force vdr to use the only selected device to do a channel scan? Theunis 2008/5/21 Jean-Claude Repetto [EMAIL PROTECTED]: Klaus Schmidinger wrote : Plain vanilly VDR assumes that every DVB-S card can receive all satellites. Klaus I hope this will be configurable in VDR 1.8 ! The LNB type should also be configurable for each DVB card (I am still using a Full-band LNB on my motorized dish). ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR EPG (satellite) : compensating datas ?
Pierre-Yves Paranthoen (PERSO) a écrit : Hi, I was wondering if there was a way to compensate the lack of EPG (satellite) datas on some channels. I'm on ASTRA 19.2. Thanks, regards Pierre If you are talking about the french channels, you can use mhwepg http://jrepetto.free.fr . ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Jean-Claude Repetto wrote: Klaus Schmidinger wrote : Plain vanilly VDR assumes that every DVB-S card can receive all satellites. Klaus I hope this will be configurable in VDR 1.8 ! The LNB type should also be configurable for each DVB card (I am still using a Full-band LNB on my motorized dish). There used to be 'sourcecaps patch' somewhere, dig it up and fix it to work with 1.7.0. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Lauri Tischler a écrit : Jean-Claude Repetto wrote: Klaus Schmidinger wrote : Plain vanilly VDR assumes that every DVB-S card can receive all satellites. Klaus I hope this will be configurable in VDR 1.8 ! The LNB type should also be configurable for each DVB card (I am still using a Full-band LNB on my motorized dish). There used to be 'sourcecaps patch' somewhere, dig it up and fix it to work with 1.7.0. Yes, I know, but I think this should be supported by VDR in the standard version. Lots of people have two dishes pointing to different satellites. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? thanks for your help Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? AFAIk this will NOT work. if vdr has 2 cards, it only uses the second card to do channel-scan, but why vdr chose the second card, not the first one ? and this vdr's behaviour only for scan ? Igor it does not know these two cards are hardwired to different sat-positions, and i know of now way to tell it about such a confguration. Is this correct Klaus? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? no, he has one FF card, second one is budget card TT3200 Igor Ok, but this does not make any difference in this situation, it will plain NOT work, as long as each card is hard-wired to only one of the LNBs. To get channelsacn working he will have to patch vdr (probably by himself) OK or get at least one switch to get both satelites to both of his cards. sorry, I don't understand how is it proceed ? How is it possible to connect two or more cards to two or more LNB's. Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Jean-Claude Repetto wrote: Lauri Tischler a Иcrit : Jean-Claude Repetto wrote: Klaus Schmidinger wrote : Plain vanilly VDR assumes that every DVB-S card can receive all satellites. Klaus I hope this will be configurable in VDR 1.8 ! The LNB type should also be configurable for each DVB card (I am still using a Full-band LNB on my motorized dish). There used to be 'sourcecaps patch' somewhere, dig it up and fix it to work with 1.7.0. Yes, I know, but I think this should be supported by VDR in the standard version. Lots of people have two dishes pointing to different satellites. It is supported by using multi-input lnb's and diseqc-switches :) could you explain please how it's possible to connect 3 cards in VDR to 3 LNB's for Hotbird, Sirius, Astra for example with DiSEq-Cswitch Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Igor schrieb: I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? thanks for your help Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? AFAIk this will NOT work. if vdr has 2 cards, it only uses the second card to do channel-scan, but why vdr chose the second card, not the first one ? and this vdr's behaviour only for scan ? Igor Hrm, i could say RTFM, but that would be a little rude ;-) so lets explain it in short: per design vdr reserves the first card in system for life viewing and does not use it for other so called idle tasks like epg-scann or transponder-scann if there is a second card in the system. thats by design, and it is written down the documentation. And when it comes to viewing a transponder, vdr uses the first card to get the signal if that tuner is available. so in your configuration you will only be able to watch the channels on hotbird, but you only can scan on astra with plain vdr Nice situation... ;-) Christoph ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Building VDR 1.7.0 - skincurses error?
Good day everyone, I've decided to use VDR 1.7.0 on my linux box, together with my Technotrend S2-3200 DVB-S2 card. Now, it's quite hard to find a decent tutorial on how to compile VDR from source, but at least I found this in the wiki: http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine It's german, and I don't completely understand it, but I wrestled through it. Right up to the point where I need to compile the plugins! ... skincurses.c: In member function ‘virtual bool cPluginSkinCurses::Initialize()’: skincurses.c:793: error: ‘WINDOW’ was not declared in this scope skincurses.c:793: error: ‘w’ was not declared in this scope skincurses.c:793: error: ‘initscr’ was not declared in this scope make[1]: *** [skincurses.o] Error 1 make[1]: Leaving directory `/usr/local/src/vdr/PLUGINS/src/skincurses' ... make[1]: Entering directory `/usr/local/src/vdr/PLUGINS/src/svdrpdemo' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/vdr/PLUGINS/src/svdrpdemo' *** failed plugins: skincurses make: *** [plugins] Error 1 What could be causing this and how can I fix it? I'm using LinuxMCE 0710 - Kernel 2.6.22-14-generic Thank you for your patience, Jelle De Loecker ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Igor schrieb: I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a clean vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on add new transponder I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as channel not available ). The log does nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the autoscan not working ? Do I need some transponder file ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? no, he has one FF card, second one is budget card TT3200 Igor Ok, but this does not make any difference in this situation, it will plain NOT work, as long as each card is hard-wired to only one of the LNBs. To get channelsacn working he will have to patch vdr (probably by himself) OK or get at least one switch to get both satelites to both of his cards. sorry, I don't understand how is it proceed ? How is it possible to connect two or more cards to two or more LNB's. Hm, back to basics of satreception... if you want more then one satelite you will need a so called diseq-switch, it has 2 ore more connectors for lnb's and one for a sat-receiver/card. you need such a switch to connect multiple lnb's to one receiver/card of vdr. if you want to connect another card to these lnb's youlneed 3 so called twin-lnb's (these habe two signal-outputs) and another diseq-switch. This is the way it's done regularly. Christoph ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
On Wed, 21 May 2008 16:57:33 +0400 Igor [EMAIL PROTECTED] wrote: --- snip - could you explain please how it's possible to connect 3 cards in VDR to 3 LNB's for Hotbird, Sirius, Astra for example with DiSEq-Cswitch Hmm, using this switch ? http://www.spaun.de/?lang=enmodul=productsproduct=842379productname=SBK9935NF Mattia -- ---MR.- ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Igor wrote: could you explain please how it's possible to connect 3 cards in VDR to 3 LNB's for Hotbird, Sirius, Astra for example with DiSEq-Cswitch Simple diagram, using quad-lnb's, input of lnbs are called as HB-1, HB-2, HB-3, HB-4 SI-1, SI-2, S1-3, SI-4 AS-1, AS-2, AS-3, AS-4 Diseqc-switch 1 ++ ||--- HB-1 Card1 -||--- SI-1 ||--- AS-1 ||--- free ++ Diseqc-switch 2 ++ ||--- HB-2 Card2 -||--- SI-2 ||--- AS-2 ||--- free ++ Diseqc-switch 3 ++ ||--- HB-3 Card3 -||--- SI-3 ||--- AS-3 ||--- free ++ ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] no channel update on vdr 1.7.0
Mattia Rossi wrote: On Wed, 21 May 2008 16:57:33 +0400 Igor [EMAIL PROTECTED] wrote: --- snip - could you explain please how it's possible to connect 3 cards in VDR to 3 LNB's for Hotbird, Sirius, Astra for example with DiSEq-Cswitch Hmm, using this switch ? http://www.spaun.de/?lang=enmodul=productsproduct=842379productname=SBK9935NF Good God NO, just a simple 4 input diseqc-switch, one for each card, price something like 10-30€ each ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Compiling VDR on Linuxmce 0710 using Multiproto march revision
Hello everyone, I'm trying to install VDR on my linuxmce machine. There's a catch, though: I can only use the regular multiproto drivers from a few weeks ago since the new ones (and the multiproto plus driver) won't detect my DVB-S2 S2-3200 card. The multiproto drivers I'm trying to use are a few months old, from march, and they're the only ones who will work. (I can use szap with them, anyway) The problem is, when I try to compile VDR using this tutorial (http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine_-_Teil3) I get this error message: g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -c -DREMOTE_KBD -DLIRC_DEVICE=\/dev/lircd\ -DRCU_DEVICE=\/dev/ttyS1\ -D_GNU_SOURCE -DVIDEODIR=\/video\ -DCONFDIR=\/video\ -DPLUGINDIR=\./PLUGINS/lib\ -DLOCDIR=\./locale\ -I/usr/include/freetype2 -I/opt/dvb/multiproto/linux/include dvbdevice.c dvbdevice.c: In member function ?bool cDvbTuner::SetFrontend()?: dvbdevice.c:302: error: ?DVBFE_SET_DELSYS? was not declared in this scope make: *** [dvbdevice.o] Error 1 Which I think indicates it's some kind of problem between VDR and the old drivers, is this correct? I pointed to the correct DVBDIR in the Make.config file so ... How can I fix it? Thank you for your time, Jelle De Loecker This message was sent using IMP, the Internet Messaging Program. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR EPG (satellite) : compensating datas ?
Of course. Is there a particular plugins to run for vdr format conversion ? Tnx Pierre -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Torgeir Veimo Envoyé : mercredi 21 mai 2008 13:01 À : VDR Mailing List Objet : Re: [vdr] VDR EPG (satellite) : compensating datas ? On 21 May 2008, at 20:53, Pierre-Yves Paranthoen (PERSO) wrote: I was wondering if there was a way to compensate the lack of EPG (satellite) datas on some channels. xmltv is your friend. -- Torgeir Veimo [EMAIL PROTECTED] ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR EPG (satellite) : compensating datas ?
Hi JC, Yes indeed, for french channels. This utility seems to be aging. Did you use it recently ? Merci Pierre -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Jean-Claude Repetto Envoyé : mercredi 21 mai 2008 13:54 À : VDR Mailing List Objet : Re: [vdr] VDR EPG (satellite) : compensating datas ? Pierre-Yves Paranthoen (PERSO) a écrit : Hi, I was wondering if there was a way to compensate the lack of EPG (satellite) datas on some channels. I'm on ASTRA 19.2. Thanks, regards Pierre If you are talking about the french channels, you can use mhwepg http://jrepetto.free.fr . ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Compiling VDR on Linuxmce 0710 using Multiproto march revision
I'm trying to install VDR on my linuxmce machine. There's a catch, though: I can only use the regular multiproto drivers from a few weeks ago since the new ones (and the multiproto plus driver) won't detect my DVB-S2 S2-3200 card. it's strange - the latest version of multiproto should work with your tt3200 you have to report to dvb-mailing list about your problem The multiproto drivers I'm trying to use are a few months old, from march, and they're the only ones who will work. (I can use szap with them, anyway) with the latest multiproto you have to use the szap2 from dvb-apps test directory http://linuxtv.org/hg/dvb-apps/file/31a6dd437b9a/test/szap2.c Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Weak TNT signal on vdr : how to mesure ?
Hello, I recently added a NOVA-T500 to my vdrbox. Unfortunately, even if the picture is really nice, I've some freezes because the TNT signal is weak (I am in 50km of the Eiffel Tower...).I ordered a 0.4 dB low noise preamplifier (ULNA 3036 from TGN-Technology) to improve my installation. Actually, Femon is mesuring only the strengh value (here about 60%), but not the rate of error. I need the two informations to fix my installation. Do you know any patch for Femon, or any utilities under Linux which can displays all TNT signal informations ? Thank you. Karim. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] reelchannelscan 0.6.1 patch for vdr-1.7.0 + h264
I have created a patch for reelchannelscan 0.6.1 and vdr-1.7.0. I have substituted cDevice::Provides_S2 with true (I have a dvb-S2 card). It is not the correct way to do it but I did not know what to do I have changed some constants like PSK8, FEC_2_3, etc with other constants I found in vdr that usually start with DVBFE. I hope it is correct. The plugin seems to work OK with DVB-S stations. When you ask it to scan for HDTV it only returns DVB-S, not DVB-S2. I would appreciate your help, in order to make this plugin work properly. The attachment is compressed with bzip2. Regards Vagelis vdr-1.7.0-h264-channelscan-0.6.1 Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelchannelscan 0.6.1 patch for vdr-1.7.0 + h264
I forgot to mention I gor reelchannelscan from reel svn site: svn co svn://[EMAIL PROTECTED]/testing/src/vdr-plugins/src/ Vangelis Nonas wrote: I have created a patch for reelchannelscan 0.6.1 and vdr-1.7.0. I have substituted cDevice::Provides_S2 with true (I have a dvb-S2 card). It is not the correct way to do it but I did not know what to do I have changed some constants like PSK8, FEC_2_3, etc with other constants I found in vdr that usually start with DVBFE. I hope it is correct. The plugin seems to work OK with DVB-S stations. When you ask it to scan for HDTV it only returns DVB-S, not DVB-S2. I would appreciate your help, in order to make this plugin work properly. The attachment is compressed with bzip2. Regards Vagelis ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] open dvb-s2 channel on Hotbird - Eurosport HD Promo
On Wed, May 21, 2008 at 12:12:18PM +0400, Igor wrote: I and Gregorie have the hvr4000 cards with the same version of multiproto_plus + hvr4000 patch. @Gregoire could you check your hvr4000 patch, because was the report about missing _set_delsys call in your second patch from 2 May. http://www.linuxtv.org/pipermail/vdr/2008-May/016893.html Well, I don't really know, since it works for you, it's a little bit strange it don't work for me, the only strange things I could find is that VDR show it as being DVB-S not DVB-S2 which won't work here, because I have DVB-S cards also. Oh, I alsa can't tune to : EDUSAT;CYFRA +:11278:vC34M2O0S0:S13.0E:27500:164:96=pol:0:0:13005:318:400:0 With any of my cards... Maybe it's a problem with my diseqc for those ? I have in diseqc.conf : S13.0E 11700 V 9750 t v W15 [E0 00 00] W120 [E0 10 38 F0] W120 [E1 10 38 F0] W15 t S13.0E 9 V 10600 t v W15 [E0 00 00] W120 [E0 10 38 F1] W120 [E1 10 38 F1] W15 T S13.0E 11700 H 9750 t V W15 [E0 00 00] W120 [E0 10 38 F2] W120 [E1 10 38 F2] W15 t S13.0E 9 H 10600 t V W15 [E0 00 00] W120 [E0 10 38 F3] W120 [E1 10 38 F3] W15 T S19.2E 11700 V 9750 t v W15 [E0 00 00] W120 [E0 10 38 F4] W120 [E1 10 38 F4] W15 t S19.2E 9 V 10600 t v W15 [E0 00 00] W120 [E0 10 38 F5] W120 [E1 10 38 F5] W15 T S19.2E 11700 H 9750 t V W15 [E0 00 00] W120 [E0 10 38 F6] W120 [E1 10 38 F6] W15 t S19.2E 9 H 10600 t V W15 [E0 00 00] W120 [E0 10 38 F7] W120 [E1 10 38 F7] W15 T S28.2E 11700 V 9750 t v W15 [E0 00 00] W120 [E0 10 38 F8] W120 [E1 10 38 F8] W15 t S28.2E 9 V 10600 t v W15 [E0 00 00] W120 [E0 10 38 F9] W120 [E1 10 38 F9] W15 T S28.2E 11700 H 9750 t V W15 [E0 00 00] W120 [E0 10 38 FA] W120 [E1 10 38 FA] W15 t S28.2E 9 H 10600 t V W15 [E0 00 00] W120 [E0 10 38 FB] W120 [E1 10 38 FB] W15 T Which seemed sofar quiete good ??? -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Weak DVB-T signal on vdr : how to mesure ?
kafifi wrote : I've some freezes because the TNT signal is weak (I am in 50km of the Eiffel Tower...).I ordered For the non-french speaking people, it may be useful to say that TNT is the french acronym for DVB-T. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Weak DVB-T signal on vdr : how to mesure ?
Sorry, thank's for the tip. -Message d'origine- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Jean-Claude Repetto Envoyé : mercredi 21 mai 2008 22:59 À : VDR Mailing List Objet : Re: [vdr] Weak DVB-T signal on vdr : how to mesure ? kafifi wrote : I've some freezes because the TNT signal is weak (I am in 50km of the Eiffel Tower...).I ordered For the non-french speaking people, it may be useful to say that TNT is the french acronym for DVB-T. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] CAM menu umlauts broken?
Hi, on my e-tobi based 1.6 setup, the CAM menu umlauts are broken, while all the other menu items (that I checked so far) use the correct encoding. Is there a recoding missing between the CAM and the vdr OSD? What LANG environment are u using? Please look at your /etc/defaults/vdr file. VDR_LANG=de_DE.UTF-8 VDR_CHARSET_OVERRIDE=ISO-8859-1 On my e-tobi based install, my cam don't have problems with de_DE.UTF-8 My setup (running on Ubuntu) shows broken Umlauts in the cam menu. Here's a screenshot of the effect. Regards, Hanno inline: screenshot.jpginline: screenshot2.jpg___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] open dvb-s2 channel on Hotbird - Eur osport HD Promo
I and Gregorie have the hvr4000 cards with the same version of multiproto_plus + hvr4000 patch. @Gregoire could you check your hvr4000 patch, because was the report about missing _set_delsys call in your second patch from 2 May. http://www.linuxtv.org/pipermail/vdr/2008-May/016893.html Well, I don't really know, since it works for you, it's a little bit strange it don't work for me, the only strange things I could find is that VDR show it as being DVB-S not DVB-S2 which won't work here, because I have DVB-S cards also. Oh, I alsa can't tune to : EDUSAT;CYFRA +:11278:vC34M2O0S0:S13.0E:27500:164:96=pol:0:0:13005:318:400:0 With any of my cards... Maybe it's a problem with my diseqc for those ? I have in diseqc.conf : S13.0E 11700 V 9750 t v W15 [E0 00 00] W120 [E0 10 38 F0] W120 [E1 10 38 F0] W15 t S13.0E 9 V 10600 t v W15 [E0 00 00] W120 [E0 10 38 F1] W120 [E1 10 38 F1] W15 T S13.0E 11700 H 9750 t V W15 [E0 00 00] W120 [E0 10 38 F2] W120 [E1 10 38 F2] W15 t S13.0E 9 H 10600 t V W15 [E0 00 00] W120 [E0 10 38 F3] W120 [E1 10 38 F3] W15 T S19.2E 11700 V 9750 t v W15 [E0 00 00] W120 [E0 10 38 F4] W120 [E1 10 38 F4] W15 t S19.2E 9 V 10600 t v W15 [E0 00 00] W120 [E0 10 38 F5] W120 [E1 10 38 F5] W15 T S19.2E 11700 H 9750 t V W15 [E0 00 00] W120 [E0 10 38 F6] W120 [E1 10 38 F6] W15 t S19.2E 9 H 10600 t V W15 [E0 00 00] W120 [E0 10 38 F7] W120 [E1 10 38 F7] W15 T S28.2E 11700 V 9750 t v W15 [E0 00 00] W120 [E0 10 38 F8] W120 [E1 10 38 F8] W15 t S28.2E 9 V 10600 t v W15 [E0 00 00] W120 [E0 10 38 F9] W120 [E1 10 38 F9] W15 T S28.2E 11700 H 9750 t V W15 [E0 00 00] W120 [E0 10 38 FA] W120 [E1 10 38 FA] W15 t S28.2E 9 H 10600 t V W15 [E0 00 00] W120 [E0 10 38 FB] W120 [E1 10 38 FB] W15 T Which seemed sofar quiete good ??? I never have seen the command [E0 00 00] - what's mean ? Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
