Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
Here are a few links I have archived on the subject. Something is sure to work for your application. Good luck! http://www.nighthawksystems.com/products.html (Pager controlled switch) http://www.specpower.com/dcsmart.asp http://www.specpower.com/dcsmart.asp Eric Albert Application Engineer Alvarion, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(190). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(43). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(84). WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
Not exactly what you want, but we're using this: http://www.dinrelay.com/ Includes autoping, etc. Only downside I've seen so far is that the reboot functions don't work correctly if you use all your dc circuits in NC - normally closed mode. We do that at a solar site to conserve power. Without the relays being normally energized, it's very power-efficient. Randy Eric Albert wrote: Here are a few links I have archived on the subject. Something is sure to work for your application. Good luck! http://www.nighthawksystems.com/products.html (Pager controlled switch) http://www.specpower.com/dcsmart.asp http://www.specpower.com/dcsmart.asp Eric Albert Application Engineer Alvarion, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(190). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(43). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(84). WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
Well if you already have AC rebooters on Site, you can go with a AC relay or a DC relay with a wall wart ... Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Wednesday, May 28, 2008 1:00 AM To: WISPA General List Subject: Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion? You have a cost effective recommendation? I guess we already had all these AC rebooters deployed and I'd rather not have to replace them all and SPEND MORE MONEY if you know what I mean. -Jon Gino Villarini wrote: Why not a DC rebooter? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
I use this device, with the remote monitoring built in for power and temp, it is a lifesaver. I even have it setup to email my phone when someone opens the door to the radio shelter some of my APs are at. Seems that those crazy HAMs have a habit of turning off power to your APs by accident sometimes. http://www.remotemonitoringsystems.ca/products.php V2 has pretty granular monitoring built into it for voltage. V1 is not so good at lower voltage measurements. The manufacturer has been GREAT via email for support. Hope this helps, ryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Cosby Sent: Wednesday, May 28, 2008 9:27 AM To: WISPA General List Subject: Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion? Not exactly what you want, but we're using this: http://www.dinrelay.com/ Includes autoping, etc. Only downside I've seen so far is that the reboot functions don't work correctly if you use all your dc circuits in NC - normally closed mode. We do that at a solar site to conserve power. Without the relays being normally energized, it's very power-efficient. Randy Eric Albert wrote: Here are a few links I have archived on the subject. Something is sure to work for your application. Good luck! http://www.nighthawksystems.com/products.html (Pager controlled switch) http://www.specpower.com/dcsmart.asp http://www.specpower.com/dcsmart.asp Eric Albert Application Engineer Alvarion, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(190). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(43). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(84). WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
We'll tell them you sent us. Looks perfect for so many things, especially temperature readings that we need here in the desert. Wish it had more relays, but we'll make do for now. D. Ryan Spott wrote: I use this device, with the remote monitoring built in for power and temp, it is a lifesaver. I even have it setup to email my phone when someone opens the door to the radio shelter some of my APs are at. Seems that those crazy HAMs have a habit of turning off power to your APs by accident sometimes. http://www.remotemonitoringsystems.ca/products.php V2 has pretty granular monitoring built into it for voltage. V1 is not so good at lower voltage measurements. The manufacturer has been GREAT via email for support. Hope this helps, ryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Cosby Sent: Wednesday, May 28, 2008 9:27 AM To: WISPA General List Subject: Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion? Not exactly what you want, but we're using this: http://www.dinrelay.com/ Includes autoping, etc. Only downside I've seen so far is that the reboot functions don't work correctly if you use all your dc circuits in NC - normally closed mode. We do that at a solar site to conserve power. Without the relays being normally energized, it's very power-efficient. Randy Eric Albert wrote: Here are a few links I have archived on the subject. Something is sure to work for your application. Good luck! http://www.nighthawksystems.com/products.html (Pager controlled switch) http://www.specpower.com/dcsmart.asp http://www.specpower.com/dcsmart.asp Eric Albert Application Engineer Alvarion, Inc. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(190). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(43). This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals computer viruses(84). WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] AC relay to reboot DC (PoE devices) suggestion?
I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
Why not a DC rebooter? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
I use a Webswitch from http://www.controlbyweb.com/webswitch/index.html You can do the remote reboot but the best part is the auto-ping feature which after a set amount of failed pings you can have it reboot something. I can not tell you how many truck rolls this thing has saved me from and it is the best thing I have found. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
I don't know where you could buy one, but this is simple and cheap to build... A power cord, a relay and some kind of connector for the dc side under $10 in parts and a few min to put together. Kurt Fankhauser wrote: I use a Webswitch from http://www.controlbyweb.com/webswitch/index.html You can do the remote reboot but the best part is the auto-ping feature which after a set amount of failed pings you can have it reboot something. I can not tell you how many truck rolls this thing has saved me from and it is the best thing I have found. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] AC relay to reboot DC (PoE devices) suggestion?
You have a cost effective recommendation? I guess we already had all these AC rebooters deployed and I'd rather not have to replace them all and SPEND MORE MONEY if you know what I mean. -Jon Gino Villarini wrote: Why not a DC rebooter? Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Langeler Sent: Tuesday, May 27, 2008 6:46 PM To: WISPA General List Subject: [WISPA] AC relay to reboot DC (PoE devices) suggestion? I'm looking for an AC relay to reboot our PoE radios and I'll explain as best I know. Basically we have 24/48V DC along with AC at our sites but our remote reboot controllers only have AC outlets on them. What I'm looking for is the ability to reboot our DC devices also with a sort of relay plugged individually into each rebootable AC port that would reboot each DC line individually. Any suggestions? Thanks Jon Langeler Michwave Tech. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
