Re: [WISPA] Weird Tranzeo problem...
I have had the exact same problem with the CPQs and like you said, swapping them with a CPE-200 works fine. All I did to fix the problem was back the TX power down on the CPQ's. Some CPQ's I have that are close in and connecting in the -40's or -50's wouldn't even start passing traffic until I set them at 2db power output, make sure you don't set it to low so that it doesn't connect back to the AP. I would start setting it at 15 and work your way from there. Also make sure your CPQ's have latest firmware, this has solved a lot of trouble also. I think the TX power is going to fix it. Let us know if it does. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Friday, March 07, 2008 12:27 AM To: WISPA General List Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
You'll find some advice in the MT forum, try downgrading to 2.9.x and lower the hardware retries down to 4-7. I've done this resulting in improved stability. steve - Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
There is a 3.4 release from MT. Just installed it. We'll see how it holds up. Marlon (509) 982-2181 (408) 907-6910 (Vonage)Consulting services 42846865 (icq)WISP Operator since 1999! [EMAIL PROTECTED] www.odessaoffice.com/wireless www.odessaoffice.com/marlon/cam - Original Message - From: Steve [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Friday, March 07, 2008 7:23 AM Subject: Re: [WISPA] Weird Tranzeo problem... You'll find some advice in the MT forum, try downgrading to 2.9.x and lower the hardware retries down to 4-7. I've done this resulting in improved stability. steve - Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Weird Tranzeo problem...
Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
What version of mt on what hardware? Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: "Blair Davis" [EMAIL PROTECTED] To: "WISPA General List" wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
3.3 on 532 and 333. marlon - Original Message - From: Blair Davis To: WISPA General List Sent: Thursday, March 06, 2008 10:18 PM Subject: Re: [WISPA] Weird Tranzeo problem... What version of mt on what hardware? Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
I've had no problems with the xr5 card on 532A, 532, 230 and ATX-x86. Connected to xr5,sr5 and cm9 as clients. All are 2.9.46 software. Only used the xr2 in my Locustworld Mesh Pro AP's.but as long as the power supply is big enough, I've had no problems with it. Marlon K. Schafer wrote: 3.3 on 532 and 333. marlon - Original Message - From: Blair Davis To: WISPA General List Sent: Thursday, March 06, 2008 10:18 PM Subject: Re: [WISPA] Weird Tranzeo problem... What version of mt on what hardware? Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
I am using that combo with over 100 CPQ and a couple of XR2s in MT units. What issue are you seeing Marlon? ryan On Mar 6, 2008, at 10:15 PM, Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
We have run into this same problem with prism AP to Tranzeo CPE.A majority of our Aps are Prism's and we are installing almost all new customers with tranzeo CPEs. A majority of them work just fine, but every once in a while we will have a problem install. We have started stocking a small inventory of prism based cpe equipment for those problems. I have had other vendors admit the same issue. Ryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer Sent: Friday, March 07, 2008 12:27 AM To: WISPA General List Subject: Re: [WISPA] Weird Tranzeo problem... 3.3 on 532 and 333. marlon - Original Message - From: Blair Davis To: WISPA General List Sent: Thursday, March 06, 2008 10:18 PM Subject: Re: [WISPA] Weird Tranzeo problem... What version of mt on what hardware? Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.6/1315 - Release Date: 3/6/2008 9:07 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.6/1315 - Release Date: 3/6/2008 9:07 AM WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Weird Tranzeo problem...
Ok. Thanks! So it is not just me! Where are you finding an all-in-one prism based CPE? Maybe something with a 19db antenna? Blair Ryan Langseth wrote: We have run into this same problem with prism AP to Tranzeo CPE.A majority of our Aps are Prism's and we are installing almost all new customers with tranzeo CPEs. A majority of them work just fine, but every once in a while we will have a problem install. We have started stocking a small inventory of prism based cpe equipment for those problems. I have had other vendors admit the same issue. Ryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer Sent: Friday, March 07, 2008 12:27 AM To: WISPA General List Subject: Re: [WISPA] Weird Tranzeo problem... 3.3 on 532 and 333. marlon - Original Message - From: Blair Davis To: WISPA General List Sent: Thursday, March 06, 2008 10:18 PM Subject: Re: [WISPA] Weird Tranzeo problem... What version of mt on what hardware? Marlon K. Schafer wrote: I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet. marlon - Original Message - From: Blair Davis [EMAIL PROTECTED] To: WISPA General List wireless@wispa.org Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... Hi all... Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism 2.5, (Senao MP2511 based) AP. They will associate and show good signal quality, but they have high and variable latency, very high, (80%+) retransmission rate, and next to no thruput. If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it works fine. Tranzeo claim there is a known issue with Atheros clients connecting to these older AP's, but I have Atheros based PCMCIA cards in laptops that work just fine with them. Has anyone else had this or a similar problem? And if so, is there any work around? Thanks... Blair Davis West Michigan Wireless ISP WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.6/1315 - Release Date: 3/6/2008 9:07 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.6/1315 - Release Date: 3/6/2008 9:07 AM WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/