I'm having trouble with the cpq and mt with xr2 cards. There's a problem that they aren't figuring out yet.
marlon ----- Original Message ----- From: "Blair Davis" <[EMAIL PROTECTED]> To: "WISPA General List" <[email protected]> Sent: Thursday, March 06, 2008 9:27 PM Subject: [WISPA] Weird Tranzeo problem... > Hi all... > > Recently, I am having a problem with the Tranzeo CPQ CPE radio's passing > traffic when associated to a Hermes I, (Lucent PCMCIA based) or a Prism > 2.5, (Senao MP2511 based) AP. They will associate and show good signal > quality, but they have high and variable latency, very high, (80%+) > retransmission rate, and next to no thruput. > > If I take an old Tranzeo CPE-200 or a Linksys WET-11 or a Lucent EC, it > works fine. > > Tranzeo claim there is a known issue with Atheros clients connecting to > these older AP's, but I have Atheros based PCMCIA cards in laptops that > work just fine with them. > > Has anyone else had this or a similar problem? And if so, is there any > work around? > > Thanks... > > Blair Davis > West Michigan Wireless ISP > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
