[WISPA] XR3 / StarOS / Pac Wireless
We've seen a drop in signal on all of our connections off of one AP. In the beginning, connections were at -70(ish) for all CPEs. Now they're at -85(ish) and not really usable. We've replaced several boards radio cards ($250 a pop for one of these radios), both at the AP and at the client (both AP clients are Valemount WAR4's). Using Pac Wireless 3.5 grids on clients Pac Wireless 3.5 VPol sector at the AP. Upon advice from Ubiquiti, we've grounded every point that could be grounded (including antenna and card). We've sent 5 of the radios back to Ubiquiti for testing to see if there's a problem with them. I'm wondering if any of you have seen the same things??? Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3 / StarOS / Pac Wireless
One AP with one radio or multiple radios in the same AP? First thought is a wet connector to tha antenna __ Jerry Richardson airCloud Communications -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark Nash Sent: Wednesday, March 04, 2009 9:15 AM To: WISPA General List Subject: [WISPA] XR3 / StarOS / Pac Wireless We've seen a drop in signal on all of our connections off of one AP. In the beginning, connections were at -70(ish) for all CPEs. Now they're at -85(ish) and not really usable. We've replaced several boards radio cards ($250 a pop for one of these radios), both at the AP and at the client (both AP clients are Valemount WAR4's). Using Pac Wireless 3.5 grids on clients Pac Wireless 3.5 VPol sector at the AP. Upon advice from Ubiquiti, we've grounded every point that could be grounded (including antenna and card). We've sent 5 of the radios back to Ubiquiti for testing to see if there's a problem with them. I'm wondering if any of you have seen the same things??? Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3 / StarOS / Pac Wireless
One AP with one radio. We've gone through the moisture issue. Originally, Ubiquiti thought that the radios were taking in too much static and we needed to DC-ground each piece of equipment. We did that, bought new radios, but still couldn't get back to our original signal levels. How about antennas? Anyone have suggestions on base station antennas? I believe the pac antenna is a 120* VPol sector antenna. Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com - Original Message - From: Jerry Richardson jrichard...@aircloud.com To: WISPA General List wireless@wispa.org Sent: Wednesday, March 04, 2009 9:23 AM Subject: Re: [WISPA] XR3 / StarOS / Pac Wireless One AP with one radio or multiple radios in the same AP? First thought is a wet connector to tha antenna __ Jerry Richardson airCloud Communications -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark Nash Sent: Wednesday, March 04, 2009 9:15 AM To: WISPA General List Subject: [WISPA] XR3 / StarOS / Pac Wireless We've seen a drop in signal on all of our connections off of one AP. In the beginning, connections were at -70(ish) for all CPEs. Now they're at -85(ish) and not really usable. We've replaced several boards radio cards ($250 a pop for one of these radios), both at the AP and at the client (both AP clients are Valemount WAR4's). Using Pac Wireless 3.5 grids on clients Pac Wireless 3.5 VPol sector at the AP. Upon advice from Ubiquiti, we've grounded every point that could be grounded (including antenna and card). We've sent 5 of the radios back to Ubiquiti for testing to see if there's a problem with them. I'm wondering if any of you have seen the same things??? Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3 / StarOS / Pac Wireless
Interference? Greg On Mar 4, 2009, at 1:05 PM, Mark Nash wrote: One AP with one radio. We've gone through the moisture issue. Originally, Ubiquiti thought that the radios were taking in too much static and we needed to DC-ground each piece of equipment. We did that, bought new radios, but still couldn't get back to our original signal levels. How about antennas? Anyone have suggestions on base station antennas? I believe the pac antenna is a 120* VPol sector antenna. Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com - Original Message - From: Jerry Richardson jrichard...@aircloud.com To: WISPA General List wireless@wispa.org Sent: Wednesday, March 04, 2009 9:23 AM Subject: Re: [WISPA] XR3 / StarOS / Pac Wireless One AP with one radio or multiple radios in the same AP? First thought is a wet connector to tha antenna __ Jerry Richardson airCloud Communications -Original Message- From: wireless-boun...@wispa.org [mailto:wireless- boun...@wispa.org] On Behalf Of Mark Nash Sent: Wednesday, March 04, 2009 9:15 AM To: WISPA General List Subject: [WISPA] XR3 / StarOS / Pac Wireless We've seen a drop in signal on all of our connections off of one AP. In the beginning, connections were at -70(ish) for all CPEs. Now they're at -85(ish) and not really usable. We've replaced several boards radio cards ($250 a pop for one of these radios), both at the AP and at the client (both AP clients are Valemount WAR4's). Using Pac Wireless 3.5 grids on clients Pac Wireless 3.5 VPol sector at the AP. Upon advice from Ubiquiti, we've grounded every point that could be grounded (including antenna and card). We've sent 5 of the radios back to Ubiquiti for testing to see if there's a problem with them. I'm wondering if any of you have seen the same things??? Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3 / StarOS / Pac Wireless
Mark, Yes we've seen this, we use NS2's on a variety of boards. We replaced the board, changed the connections and relocated the antenna. Weather doesn't seem to affect it and the calls certainly increase as the noise floor is approached in the -87's to -90's. We put in an Engeinus CB3 and problem went away. Three boards, two chips and no go except another brand. Never really found an answer except changing brands of antenna's helped. I'm sure it's interference related but its hard to put my finger on it. Forbes -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Mark Nash Sent: Wednesday, March 04, 2009 9:15 AM To: WISPA General List Subject: [WISPA] XR3 / StarOS / Pac Wireless We've seen a drop in signal on all of our connections off of one AP. In the beginning, connections were at -70(ish) for all CPEs. Now they're at -85(ish) and not really usable. We've replaced several boards radio cards ($250 a pop for one of these radios), both at the AP and at the client (both AP clients are Valemount WAR4's). Using Pac Wireless 3.5 grids on clients Pac Wireless 3.5 VPol sector at the AP. Upon advice from Ubiquiti, we've grounded every point that could be grounded (including antenna and card). We've sent 5 of the radios back to Ubiquiti for testing to see if there's a problem with them. I'm wondering if any of you have seen the same things??? Mark Nash UnwiredWest 78 Centennial Loop Suite E Eugene, OR 97401 541-998- 541-998-5599 fax http://www.unwiredwest.com WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.7/1982 - Release Date: 03/03/09 16:09:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3
Found out from MT you have to buy a custom frequency license for each to use it. John Buwa Michiana Wireless -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Cosby Sent: Friday, August 29, 2008 6:46 PM To: [EMAIL PROTECTED]; WISPA General List Subject: Re: [WISPA] XR3 What did the sticker say with the card? Mine said to bump it 2.0GHz, so 5.540 = 3.540. That worked for me. Following the instructions in the forum did not. [EMAIL PROTECTED] wrote: Anyone using the XR3/ 20mhz spacing on the list? The conversion table says Channel B real 5770Mhz equals 3663 Mhz but 5770 is not selectable unless the card is in 5 or 10 mhz channels? What gives? John Buwa Michiana Wireless -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Friday, August 29, 2008 4:30 PM To: WISPA General List Subject: [WISPA] Redline AN100 Latest software? I have 1.2.24 on my AN100 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 --- --- -- WISPA Wants You! Join today! http://signup.wispa.org/ --- --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3
Ah yeah... or try a different country code. Randy [EMAIL PROTECTED] wrote: Found out from MT you have to buy a custom frequency license for each to use it. John Buwa Michiana Wireless -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Randy Cosby Sent: Friday, August 29, 2008 6:46 PM To: [EMAIL PROTECTED]; WISPA General List Subject: Re: [WISPA] XR3 What did the sticker say with the card? Mine said to bump it 2.0GHz, so 5.540 = 3.540. That worked for me. Following the instructions in the forum did not. [EMAIL PROTECTED] wrote: Anyone using the XR3/ 20mhz spacing on the list? The conversion table says Channel B real 5770Mhz equals 3663 Mhz but 5770 is not selectable unless the card is in 5 or 10 mhz channels? What gives? John Buwa Michiana Wireless -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Friday, August 29, 2008 4:30 PM To: WISPA General List Subject: [WISPA] Redline AN100 Latest software? I have 1.2.24 on my AN100 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 --- --- -- WISPA Wants You! Join today! http://signup.wispa.org/ --- --- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] XR3
Anyone using the XR3/ 20mhz spacing on the list? The conversion table says Channel B real 5770Mhz equals 3663 Mhz but 5770 is not selectable unless the card is in 5 or 10 mhz channels? What gives? John Buwa Michiana Wireless -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Friday, August 29, 2008 4:30 PM To: WISPA General List Subject: [WISPA] Redline AN100 Latest software? I have 1.2.24 on my AN100 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] XR3
What did the sticker say with the card? Mine said to bump it 2.0GHz, so 5.540 = 3.540. That worked for me. Following the instructions in the forum did not. [EMAIL PROTECTED] wrote: Anyone using the XR3/ 20mhz spacing on the list? The conversion table says Channel B real 5770Mhz equals 3663 Mhz but 5770 is not selectable unless the card is in 5 or 10 mhz channels? What gives? John Buwa Michiana Wireless -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini Sent: Friday, August 29, 2008 4:30 PM To: WISPA General List Subject: [WISPA] Redline AN100 Latest software? I have 1.2.24 on my AN100 Gino A. Villarini [EMAIL PROTECTED] Aeronet Wireless Broadband Corp. tel 787.273.4143 fax 787.273.4145 -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Randy Cosby Vice President InfoWest, Inc office: 435-773-6071 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/