Re: [wsjt-devel] WSJT-X 2.5.0 GA Release
Thanks for the great work. Compiled fine from source on Debian 11 Linux, using my usual methodology. I noted that the workable frequencies table got larger, but deleted the ones my rig is incapable of handling to avoid accidentally switching to one. Good to see there's a simple way to restore to defaults (if I get another rig). I didn't do any of the RC testing this go around, too busy with other things in life. But will be using 2.5.0 now, looks great! 73, KD0KZE / Paul On 9/27/2021 11:14 AM, Joe Taylor via wsjt-devel wrote: We are pleased to announce the General Availability (GA) release of WSJT-X version 2.5.0. New features are described in the WSJT-X User Guide here: https://physics.princeton.edu//pulsar/k1jt/wsjtx-doc/wsjtx-main-2.5.0.html#NEW_FEATURES and also Release Notes: https://physics.princeton.edu//pulsar/k1jt/Release_Notes.txt On Windows platforms, WSJT-X 2.5 includes MAP65 3.0.0, a wideband polarization-matching tool intended for EME. Links to WSJT-X 2.5.0 installation packages for Windows, Linux, and Macintosh are available here: http://physics.princeton.edu/pulsar/k1jt/wsjtx.html You can also download the packages from our SourceForge site: https://sourceforge.net/projects/wsjt/files/ It may take a short time for the SourceForge site to be updated. WSJT-X for Windows now ships with Hamlib built as a dynamic link library (DLL). This change will allow Hamlib bug fixes to be resolved by replacing the DLL with an updated version. WSJT-X is licensed under the terms of Version 3 of the GNU General Public License (GPL). Development of this software is a cooperative project to which many amateur radio operators have contributed. If you use our code, please have the courtesy to let us know about it. If you find bugs or make improvements to the code, please report them to us in a timely fashion. The authors and Copyright holders of WSJT-X request that derivative works should not publish programs based on features in WSJT-X before those features are made available in a General Availability (GA) release of WSJT-X. We will cease making public Release Candidate (RC) pre-releases for testing and user early access purposes if this request is ignored. Bugs should be reported by following instructions found here in the User Guide: https://www.physics.princeton.edu//pulsar/K1JT/wsjtx-doc/wsjtx-main-2.5.0.html#_bug_reports We hope you will enjoy using WSJT-X 2.5.0. -- 73 from Joe, K1JT; Bill, G4WJS; Steve, K9AN; and Nico, IV3NWV ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
Il 30/09/21 19:20, Bill Somerville ha scritto: On 30/09/2021 16:35, Marco Calistri wrote: Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto: On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote: CQRLOG now has been compiled with the */chkvfo/* feature, settings adjusted as suggested but again _*no AFSK going to radio rear data connector if I select mode USB in WSJT-X*_, in order to transmit an FT8 signal _*I *__*need to select DIG mode*_. Then, the only possible solution *IMHO* should be that Hamlib being modified accordingly in order to permits AFSK being usable for rear data connector in SSB too and not just in DIG mode. Marco, DIG mode is the correct rig mode setting for AFSK digimodes when using the FT-100. There is no facility to select the Tx audio source other than the rig mode settings with the FT-100. 73 Bill G4WJS. Hey Bill! I've not doubts about what you say, but unluckily, due some reasons I'm not aware of, if I select Mode Data/Pkt in WSJT-X, it looks like nobody station being able to listen and consequently to answer to my calls. Probably when I set Data/Pkt my radio transmit on a little shifted frequency out of the center of the standard transmission FT8 frequency and this unallow my signal to be heard. --- *73 de Marco, PY1ZRJ (former IK5BCU)* Hi Marco, which DIG mode (AFSK MODE) have you set in your rig's menu? Have you set the PKT DISPLAY menu item to zero to remove any VFO dial frequency offset in PCt-U mode? 73 Bill G4WJS. Bill, I confess that I have not checked this parameter so far, sad to admit it but this demonstrate my little effort to document myself better about this specific configurations. Now I entered into YAESU FT-100 Menu and the parameters related to DIG mode are as following: 34 - AFSK Mode = PCt-U 35 - RTTY SHIFT = 170 (I guess this not important in this case) 36 - RTTY DISPLAY = nor 37 - PACKET RATE = 1200 38 -*PKT DISPLAY = 2125 (!!!)* 39 - PACKET TONE = 2125 Is that just MENU 38 to be set Bill? Thanks and regards. --- *73 de Marco, PY1ZRJ (former IK5BCU)* **___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Version 2.5 not linking to my IC-7800
On 30/09/2021 23:14, Fred Hurd via wsjt-devel wrote: I just updated my WSJT-X SW to version 2.5 but I can no longer communicate with my IC-7800 radio. Has something changed in the SW radio setup settings? Fred W4PKU Hi Fred, I assume you are getting an error message, what does that say, including the details? 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
On 30/09/2021 16:35, Marco Calistri wrote: Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto: On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote: CQRLOG now has been compiled with the */chkvfo/* feature, settings adjusted as suggested but again _*no AFSK going to radio rear data connector if I select mode USB in WSJT-X*_, in order to transmit an FT8 signal _*I *__*need to select DIG mode*_. Then, the only possible solution *IMHO* should be that Hamlib being modified accordingly in order to permits AFSK being usable for rear data connector in SSB too and not just in DIG mode. Marco, DIG mode is the correct rig mode setting for AFSK digimodes when using the FT-100. There is no facility to select the Tx audio source other than the rig mode settings with the FT-100. 73 Bill G4WJS. Hey Bill! I've not doubts about what you say, but unluckily, due some reasons I'm not aware of, if I select Mode Data/Pkt in WSJT-X, it looks like nobody station being able to listen and consequently to answer to my calls. Probably when I set Data/Pkt my radio transmit on a little shifted frequency out of the center of the standard transmission FT8 frequency and this unallow my signal to be heard. --- *73 de Marco, PY1ZRJ (former IK5BCU)* Hi Marco, which DIG mode (AFSK MODE) have you set in your rig's menu? Have you set the PKT DISPLAY menu item to zero to remove any VFO dial frequency offset in PCt-U mode? 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Version 2.5 not linking to my IC-7800
I just updated my WSJT-X SW to version 2.5 but I can no longer communicate with my IC-7800 radio. Has something changed in the SW radio setup settings? Fred W4PKU Sent from my iPad ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
Il 30/09/21 12:42, Black Michael ha scritto: According to hamspots.net and pskreporter you are being seen. Mike W9MDB On Thursday, September 30, 2021, 10:39:29 AM CDT, Marco Calistri via wsjt-devel wrote: Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto: On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote: CQRLOG now has been compiled with the */chkvfo/* feature, settings adjusted as suggested but again _*no AFSK going to radio rear data connector if I select mode USB in WSJT-X*_, in order to transmit an FT8 signal _*I *__*need to select DIG mode*_. Then, the only possible solution *IMHO* should be that Hamlib being modified accordingly in order to permits AFSK being usable for rear data connector in SSB too and not just in DIG mode. Marco, DIG mode is the correct rig mode setting for AFSK digimodes when using the FT-100. There is no facility to select the Tx audio source other than the rig mode settings with the FT-100. 73 Bill G4WJS. Hey Bill! I've not doubts about what you say, but unluckily, due some reasons I'm not aware of, if I select Mode Data/Pkt in WSJT-X, it looks like nobody station being able to listen and consequently to answer to my calls. Probably when I set Data/Pkt my radio transmit on a little shifted frequency out of the center of the standard transmission FT8 frequency and this unallow my signal to be heard. --- *73 de Marco, PY1ZRJ (former IK5BCU)*** Hey Mike! Yes I'm also monitoring my FT8 status trough pskreporter.de and there appears that some station is able to decode my FT8 transmission, but so far, if I use DIG instead of SSB, I didn't received any replies. Anyway, I will stop for a while to send messages here now because I think I'm abusing of the list just for my specific problem. Many thanks to everybody which have provided some sort of feedback on this regard! --- *73 de Marco, PY1ZRJ (former IK5BCU)* **___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
According to hamspots.net and pskreporter you are being seen. Mike W9MDB On Thursday, September 30, 2021, 10:39:29 AM CDT, Marco Calistri via wsjt-devel wrote: Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto: On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote: CQRLOG now has been compiled with the chkvfo feature, settings adjusted as suggested but again no AFSK going to radio rear data connector if I select mode USB in WSJT-X, in order to transmit an FT8 signal I need to select DIG mode. Then, the only possible solution IMHO should be that Hamlib being modified accordingly in order to permits AFSK being usable for rear data connector in SSB too and not just in DIG mode. Marco, DIG mode is the correct rig mode setting for AFSK digimodes when using the FT-100. There is no facility to select the Tx audio source other than the rig mode settings with the FT-100. 73 Bill G4WJS. Hey Bill! I've not doubts about what you say, but unluckily, due some reasons I'm not aware of, if I select Mode Data/Pkt in WSJT-X, it looks like nobody station being able to listen and consequently to answer to my calls. Probably when I set Data/Pkt my radio transmit on a little shifted frequency out of the center of the standard transmission FT8 frequency and this unallow my signal to be heard. --- 73 de Marco, PY1ZRJ (former IK5BCU) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto: On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote: CQRLOG now has been compiled with the */chkvfo/* feature, settings adjusted as suggested but again _*no AFSK going to radio rear data connector if I select mode USB in WSJT-X*_, in order to transmit an FT8 signal _*I *__*need to select DIG mode*_. Then, the only possible solution *IMHO* should be that Hamlib being modified accordingly in order to permits AFSK being usable for rear data connector in SSB too and not just in DIG mode. Marco, DIG mode is the correct rig mode setting for AFSK digimodes when using the FT-100. There is no facility to select the Tx audio source other than the rig mode settings with the FT-100. 73 Bill G4WJS. Hey Bill! I've not doubts about what you say, but unluckily, due some reasons I'm not aware of, if I select Mode Data/Pkt in WSJT-X, it looks like nobody station being able to listen and consequently to answer to my calls. Probably when I set Data/Pkt my radio transmit on a little shifted frequency out of the center of the standard transmission FT8 frequency and this unallow my signal to be heard. --- *73 de Marco, PY1ZRJ (former IK5BCU)* **___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote: CQRLOG now has been compiled with the */chkvfo/* feature, settings adjusted as suggested but again _*no AFSK going to radio rear data connector if I select mode USB in WSJT-X*_, in order to transmit an FT8 signal _*I *__*need to select DIG mode*_. Then, the only possible solution *IMHO* should be that Hamlib being modified accordingly in order to permits AFSK being usable for rear data connector in SSB too and not just in DIG mode. Marco, DIG mode is the correct rig mode setting for AFSK digimodes when using the FT-100. There is no facility to select the Tx audio source other than the rig mode settings with the FT-100. 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
Thu, 30 Sep 2021 09:25:41 -0300 Marco Calistri via wsjt-devel kirjoitti: > Il 30/09/21 06:20, Reino Talarmo ha scritto: > > > > 2) *_AFSK is being regularly produced by WSJT-X through the > > computer sound card_*, then I guess that there is a sort of > > "*/software muting/*" of this signal which is blocked in some way > > to feed the rear data connector of my YAESU FT-100 which in turn > > doesn't transmit any RF. May be if I would attach the AFSK output > > directly to the radio mic plug, then the RF transmission would be > > possible. > > > > Hi Marco, > > > > This a wild guess as I have no access to YAESU FT-100, but in some > > rigs you need to select Mode Data/Pkt not USB in order to get audio > > via the rear data connector. > > > > 73, Reino OH3mA > > > > Yeah Jarmo!!! > > You are right, in fact yesterday I was playing around the modes and I > verified that if I select digital and set accordingly my FT-100 menu > to use "PCT_USB", then my environment works: AFSK reach the rear data > port and my FT8 signal is being transmitted. > > However I guess DIG mode is not ideal for my setup because it looks > like nobody is answering to my CQ's (tested some minutes on 40 meters > band). > > I will try again today the DIG mode on the higher frequencies, where > is more easy to get a station reply. > > Best regards > > --- > *73 de Marco, PY1ZRJ (former IK5BCU)* > ** Hi Now, again, question is about version change into 2.5.0. These Kenwoods, ts590, ts890 have been working like charm. And my TS890 works OK with 2.5.0. Audio (afsk) is put into radio USB-A --- USB-B cable, no interfaces between computer/radio. Again, if chosen Hamlib Net Rigctl, no TX audio out, PTT fires radio TX on. RX works perfect. If chosen KENWOOD TS590SG as RADIO both TX and RX works OK. This is the problem, I want to use HAMLIB NET RIGCTL, because want to connect CQRLOG also. AN AGAIN, THIS HAVE BEEN working before.. Only thing, what also made me thinking, if SELINUX does not let TX-audio out. Anyway, something dumps audio.. Jarmo ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
Il 30/09/21 06:20, Reino Talarmo ha scritto: 2) *_AFSK is being regularly produced by WSJT-X through the computer sound card_*, then I guess that there is a sort of "*/software muting/*" of this signal which is blocked in some way to feed the rear data connector of my YAESU FT-100 which in turn doesn't transmit any RF. May be if I would attach the AFSK output directly to the radio mic plug, then the RF transmission would be possible. Hi Marco, This a wild guess as I have no access to YAESU FT-100, but in some rigs you need to select Mode Data/Pkt not USB in order to get audio via the rear data connector. 73, Reino OH3mA Yeah Jarmo!!! You are right, in fact yesterday I was playing around the modes and I verified that if I select digital and set accordingly my FT-100 menu to use "PCT_USB", then my environment works: AFSK reach the rear data port and my FT8 signal is being transmitted. However I guess DIG mode is not ideal for my setup because it looks like nobody is answering to my CQ's (tested some minutes on 40 meters band). I will try again today the DIG mode on the higher frequencies, where is more easy to get a station reply. Best regards --- *73 de Marco, PY1ZRJ (former IK5BCU)* **___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
2) AFSK is being regularly produced by WSJT-X through the computer sound card, then I guess that there is a sort of "software muting" of this signal which is blocked in some way to feed the rear data connector of my YAESU FT-100 which in turn doesn't transmit any RF. May be if I would attach the AFSK output directly to the radio mic plug, then the RF transmission would be possible. Hi Marco, This a wild guess as I have no access to YAESU FT-100, but in some rigs you need to select Mode Data/Pkt not USB in order to get audio via the rear data connector. 73, Reino OH3mA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
Thu, 30 Sep 2021 08:06:34 +0200 Claude Frantz via wsjt-devel kirjoitti: > On 9/30/21 5:01 AM, jarmo via wsjt-devel wrote: > > Hi Jarmo & all, > These rigs may have different USB interfaces and different sound > chips, so that they appear as different items in pavucontrol. Yes, I know that and sure have selected right in pavucontrol.. Jarmo ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
On 9/30/21 5:01 AM, jarmo via wsjt-devel wrote: Hi Jarmo & all, I think, it has nothing to do with souncard. Both radios are connected directly via USB so wsjtx uses audio codec as input and output. These rigs may have different USB interfaces and different sound chips, so that they appear as different items in pavucontrol. Best wishes, Claude (DJ0OT) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Some minor issues.
On 9/30/21 6:19 AM, Marco Calistri via wsjt-devel wrote: Hi Marco & all, 2) _*AFSK is being regularly produced by WSJT-X through the computer sound card*_, then I guess that there is a sort of "*/software muting/*" of this signal which is blocked in some way to feed the rear data connector of my YAESU FT-100 which in turn doesn't transmit any RF. May be if I would attach the AFSK output directly to the radio mic plug, then the RF transmission would be possible. Please verify the settings in "pavucontrol" which is part of pulseaudio. Verify that you have selected the right source, sink and that no one of them is muted. Verify that pavucontrol shows a signal on the selected items. In WSJT-X, verify that you have selected the appropriate "sound card". If you use an USB connected "sound card", you will see a least 2 cards, because there is probably an internal soundcard in the computer. Best wishes, Claude (DJ0OT) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel