Il 30/09/21 12:42, Black Michael ha scritto:
According to hamspots.net and pskreporter you are being seen.
Mike W9MDB
On Thursday, September 30, 2021, 10:39:29 AM CDT, Marco Calistri via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto:
On 30/09/2021 14:36, Marco Calistri via wsjt-devel wrote:
CQRLOG now has been compiled with the */chkvfo/* feature, settings
adjusted as suggested but again _*no AFSK going to radio rear data
connector if I select mode USB in WSJT-X*_, in order to transmit an
FT8 signal _*I *__*need to select DIG mode*_.
Then, the only possible solution *IMHO* should be that Hamlib being
modified accordingly in order to permits AFSK being usable for rear
data connector in SSB too and not just in DIG mode.
Marco,
DIG mode is the correct rig mode setting for AFSK digimodes when
using the FT-100.
There is no facility to select the Tx audio source other than the rig
mode settings with the FT-100.
73
Bill
G4WJS.
Hey Bill!
I've not doubts about what you say, but unluckily, due some reasons
I'm not aware of, if I select Mode Data/Pkt in WSJT-X, it looks like
nobody station being able to listen and consequently to answer to my
calls.
Probably when I set Data/Pkt my radio transmit on a little shifted
frequency out of the center of the standard transmission FT8 frequency
and this unallow my signal to be heard.
---
*73 de Marco, PY1ZRJ (former IK5BCU)***
Hey Mike!
Yes I'm also monitoring my FT8 status trough pskreporter.de and there
appears that some station is able to decode my FT8 transmission, but so
far, if I use DIG instead of SSB, I didn't received any replies.
Anyway, I will stop for a while to send messages here now because I
think I'm abusing of the list just for my specific problem.
Many thanks to everybody which have provided some sort of feedback on
this regard!
---
*73 de Marco, PY1ZRJ (former IK5BCU)*
**
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
