Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-20 Thread Saku 
Did you read my previous message (attacked) or can't  I express myself ok?

I said it happens ( also)  in linux, and quick halt tx/enable tx  releases 
audio . Read again , please.
-- 
Saku
OH1KH

20. maaliskuuta 2021 11.40.17 GMT+02:00 Alessandro Gorobey via wsjt-devel 
 kirjoitti:
>Hi Saku
>
>this is not limited to MacOS
>Also in other platforms (windows, linux)
>Try "Halt TX" instead of press "Tune"
>
>Il 20/03/2021 10:12, Saku ha scritto:
>> In addition:
>> 
>> A) This happens with FT8. It does not happen with FT4
>> B) If "tune" is not used, I.E. just band changed and double clicked
>CQ 
>> caller TX works with audio. Using "Tune" button causes bug.
>> 
>> 
>> Saku kirjoitti 20.3.2021 klo 8.44:
>>> Hey !
>>>
>>> Now when testing more carefully after reading these messages I can
>now 
>>> reproduce this 100% with GA 2.3.0 but that problem has been there
>with 
>>> earlier versions as well.
>>>
>>> Fedora 32, wsjt-x self compiled, Icom7300 USB audio:
>>>
>>> input: 
>>> alsa_input.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo /
>Mono
>>> output: 
>>> alsa_output.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo /
>Mono
>>>
>>> That means alsa plugin for pulse audio. Can be controlled by
>pavucontrol.
>>> Selecting "pulse" to both input and output does not work. It has
>newer 
>>> worked properly causing problems at wsjt-x close and restart.
>>>
>>> Reproducing goes like this:
>>>
>>> 1) change band
>>> 2) press "Tune" to start auto tuning. (set auto tune at Icom setup)
>>> 3) press "Tune" again after autotuner has finished to stop TX
>>> 4) on next period that is decoded double click CQ caller's callsign
>>>
>>> 5) TX starts(PTT works), but there is no audio I.E. no power output.
>>>
>>> 6)Press "Halt TX" and "Enable TX" fast (before it is too late, must
>be 
>>> at start of period) and TX starts again with audio output normally.
>>>
>>> 7) you can reproduce this right away as many times as you like by 
>>> starting from 1)
>>>
>>> Double click on "band activity" or "rx frequency" window does not 
>>> matter. Same effect in both.
>>> Cleaning windows and DX call with F4 does not matter.
>>>
>>>
>
>-- 
>73
>Sandro
>IW3RAB
>
>
>___
>wsjt-devel mailing list
>wsjt-devel@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-20 Thread Alessandro Gorobey via wsjt-devel 

Hi Saku

this is not limited to MacOS
Also in other platforms (windows, linux)
Try "Halt TX" instead of press "Tune"

Il 20/03/2021 10:12, Saku ha scritto:

In addition:

A) This happens with FT8. It does not happen with FT4
B) If "tune" is not used, I.E. just band changed and double clicked CQ 
caller TX works with audio. Using "Tune" button causes bug.



Saku kirjoitti 20.3.2021 klo 8.44:

Hey !

Now when testing more carefully after reading these messages I can now 
reproduce this 100% with GA 2.3.0 but that problem has been there with 
earlier versions as well.


Fedora 32, wsjt-x self compiled, Icom7300 USB audio:

input: 
alsa_input.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo / Mono
output: 
alsa_output.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo / Mono


That means alsa plugin for pulse audio. Can be controlled by pavucontrol.
Selecting "pulse" to both input and output does not work. It has newer 
worked properly causing problems at wsjt-x close and restart.


Reproducing goes like this:

1) change band
2) press "Tune" to start auto tuning. (set auto tune at Icom setup)
3) press "Tune" again after autotuner has finished to stop TX
4) on next period that is decoded double click CQ caller's callsign

5) TX starts(PTT works), but there is no audio I.E. no power output.

6)Press "Halt TX" and "Enable TX" fast (before it is too late, must be 
at start of period) and TX starts again with audio output normally.


7) you can reproduce this right away as many times as you like by 
starting from 1)


Double click on "band activity" or "rx frequency" window does not 
matter. Same effect in both.

Cleaning windows and DX call with F4 does not matter.




--
73
Sandro
IW3RAB


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-20 Thread Saku 

In addition:

A) This happens with FT8. It does not happen with FT4
B) If "tune" is not used, I.E. just band changed and double clicked CQ 
caller TX works with audio. Using "Tune" button causes bug.



Saku kirjoitti 20.3.2021 klo 8.44:

Hey !

Now when testing more carefully after reading these messages I can now 
reproduce this 100% with GA 2.3.0 but that problem has been there with 
earlier versions as well.


Fedora 32, wsjt-x self compiled, Icom7300 USB audio:

input: 
alsa_input.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo / Mono
output: 
alsa_output.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo / Mono


That means alsa plugin for pulse audio. Can be controlled by pavucontrol.
Selecting "pulse" to both input and output does not work. It has newer 
worked properly causing problems at wsjt-x close and restart.


Reproducing goes like this:

1) change band
2) press "Tune" to start auto tuning. (set auto tune at Icom setup)
3) press "Tune" again after autotuner has finished to stop TX
4) on next period that is decoded double click CQ caller's callsign

5) TX starts(PTT works), but there is no audio I.E. no power output.

6)Press "Halt TX" and "Enable TX" fast (before it is too late, must be 
at start of period) and TX starts again with audio output normally.


7) you can reproduce this right away as many times as you like by 
starting from 1)


Double click on "band activity" or "rx frequency" window does not 
matter. Same effect in both.

Cleaning windows and DX call with F4 does not matter.



--
Saku
OH1KH



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-20 Thread Saku 

Hey !

Now when testing more carefully after reading these messages I can now 
reproduce this 100% with GA 2.3.0 but that problem has been there with 
earlier versions as well.


Fedora 32, wsjt-x self compiled, Icom7300 USB audio:

input: alsa_input.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo 
/ Mono
output: 
alsa_output.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo / Mono


That means alsa plugin for pulse audio. Can be controlled by pavucontrol.
Selecting "pulse" to both input and output does not work. It has newer 
worked properly causing problems at wsjt-x close and restart.


Reproducing goes like this:

1) change band
2) press "Tune" to start auto tuning. (set auto tune at Icom setup)
3) press "Tune" again after autotuner has finished to stop TX
4) on next period that is decoded double click CQ caller's callsign

5) TX starts(PTT works), but there is no audio I.E. no power output.

6)Press "Halt TX" and "Enable TX" fast (before it is too late, must be 
at start of period) and TX starts again with audio output normally.


7) you can reproduce this right away as many times as you like by 
starting from 1)


Double click on "band activity" or "rx frequency" window does not 
matter. Same effect in both.

Cleaning windows and DX call with F4 does not matter.


--
Saku
OH1KH



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-18 Thread Black Michael via wsjt-devel 
I wonder if some of these rigs are avoiding hot switching PTT and ya'll are in 
a borderline case.
Under the Advanced tab try changing the PTT delay to 0.2s instead of 0.1s.
Mike W9MDB




 

On Thursday, March 18, 2021, 02:49:51 AM CDT, Saku  wrote:  
 
  
HI!
 
This TX without audio (randomly) has been there from "stone age". There were 
some versions backwards that it appeared very seldom. Now with 2.3.0 again 
little more often.
 Usually then when you see rare square or DX and start to transmit ;-( So 
always look at Pwr meter and stop/start TX if no output at first go.  There can 
be something related to recent band change. During these years I have not been 
able to reliably reproduce it.
 
So it exist, but so seldom that you get used to it.
 wsjtx 2.3.0 
 Ic-7300
 Fedora 32
 -- 
Saku
OH1KH 
 Kevin McQuiggin kirjoitti 17.3.2021 klo 19.03:
  
 
 Hi Bill and [WSJT-X Devel] group: 
  More info on this bug: 
  This “TX but no audio” on first transmission after band change issue persists 
as well in 2.4-rc3, using an iMac and KX3.  Second TX cycle, all is well.  The 
behaviour is generally reproducible, but not always.  I’ve seen it on FT8, 
MSK144, and Q65.  I can make another video for YouTube using 2.4-rc3 if that 
will help, but the behaviour is unchanged from 2.3.0 other than the problem 
occurring as well on new mode Q65. 
  I note that the workaround of hitting “Tune”; then “Halt” after each band 
change usually seems to fix the issue, but this does not always prevent the 
behaviour either. 
  I will assist in testing as required, just let me know. 
  73, 
  Kevin VE7ZD 

 On Mar 17, 2021, at 9:48 AM, David Birnbaum  wrote: 
  
  
I've been having the same issue - no transmit audio although TUNE does work.  
Same setup except I'm connected to the IC7300 directly via USB.
 
 
  dave k2lyv    ___
 wsjt-devel mailing list
 wsjt-devel@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
 
  
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-18 Thread Saku 

HI!

This TX without audio (randomly) has been there from "stone age". There 
were some versions backwards that it appeared very seldom. Now with 
2.3.0 again little more often.
Usually then when you see rare square or DX and start to transmit ;-( So 
always look at Pwr meter and stop/start TX if no output at first go.  
There can be something related to recent band change. During these years 
I have not been able to reliably reproduce it.


So it exist, but so seldom that you get used to it.

wsjtx 2.3.0
Ic-7300
Fedora 32

--
Saku
OH1KH


Kevin McQuiggin kirjoitti 17.3.2021 klo 19.03:

Hi Bill and [WSJT-X Devel] group:

More info on this bug:

This “TX but no audio” on first transmission after band change issue 
persists as well in 2.4-rc3, using an iMac and KX3.  Second TX cycle, 
all is well.  The behaviour is generally reproducible, but not always. 
 I’ve seen it on FT8, MSK144, and Q65.  I can make another video for 
YouTube using 2.4-rc3 if that will help, but the behaviour is 
unchanged from 2.3.0 other than the problem occurring as well on new 
mode Q65.


I note that the workaround of hitting “Tune”; then “Halt” after each 
band change usually seems to fix the issue, but this does not always 
prevent the behaviour either.


I will assist in testing as required, just let me know.

73,

Kevin VE7ZD

On Mar 17, 2021, at 9:48 AM, David Birnbaum > wrote:


I've been having the same issue - no transmit audio although TUNE
does work.  Same setup except I'm connected to the IC7300
directly via USB.


dave
k2lyv
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net 


https://lists.sourceforge.net/lists/listinfo/wsjt-devel




___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-17 Thread George J Molnar 
Another report of the rc3 MacOS audio issue as well. Flex 6600, SmartSDR for 
Mac 1.4.34, and Intel Mac mini OS 11.2.3.

Not always reproducible, but relatively frequent.


George J Molnar, KF2T
College Park, Maryland, USA





___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.4.0-rc3 Audio Issue - Issue Persists on MacOS As Well

2021-03-17 Thread Kevin McQuiggin 
Hi Bill and [WSJT-X Devel] group:

More info on this bug:

This “TX but no audio” on first transmission after band change issue persists 
as well in 2.4-rc3, using an iMac and KX3.  Second TX cycle, all is well.  The 
behaviour is generally reproducible, but not always.  I’ve seen it on FT8, 
MSK144, and Q65.  I can make another video for YouTube using 2.4-rc3 if that 
will help, but the behaviour is unchanged from 2.3.0 other than the problem 
occurring as well on new mode Q65.

I note that the workaround of hitting “Tune”; then “Halt” after each band 
change usually seems to fix the issue, but this does not always prevent the 
behaviour either.

I will assist in testing as required, just let me know.

73,

Kevin VE7ZD

> On Mar 17, 2021, at 9:48 AM, David Birnbaum  wrote:
> 
> I've been having the same issue - no transmit audio although TUNE does work.  
> Same setup except I'm connected to the IC7300 directly via USB.
> 
> dave
> k2lyv 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel