Hey !
Now when testing more carefully after reading these messages I can now
reproduce this 100% with GA 2.3.0 but that problem has been there with
earlier versions as well.
Fedora 32, wsjt-x self compiled, Icom7300 USB audio:
input: alsa_input.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo
/ Mono
output:
alsa_output.usb-Burr-Brown_fromTI_USB_Audio_CODEC-00.analog.stereo / Mono
That means alsa plugin for pulse audio. Can be controlled by pavucontrol.
Selecting "pulse" to both input and output does not work. It has newer
worked properly causing problems at wsjt-x close and restart.
Reproducing goes like this:
1) change band
2) press "Tune" to start auto tuning. (set auto tune at Icom setup)
3) press "Tune" again after autotuner has finished to stop TX
4) on next period that is decoded double click CQ caller's callsign
5) TX starts(PTT works), but there is no audio I.E. no power output.
6)Press "Halt TX" and "Enable TX" fast (before it is too late, must be
at start of period) and TX starts again with audio output normally.
7) you can reproduce this right away as many times as you like by
starting from 1)
Double click on "band activity" or "rx frequency" window does not
matter. Same effect in both.
Cleaning windows and DX call with F4 does not matter.
--
Saku
OH1KH
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
