Re: [Zaurus-devel] latest angstrom image + linux-2.6.38.4 report
Pavel Machek wrote: > BTW online charging does not work _at all_. Connected with empty > battery to (hopefully good) power supply at 10pm, battery was still > empty at 7am :-(. Well, I guess I have seen charging LED on while online. So maybe measurement may be broken. > > > > - HDD LED seems to not work. > > > Hdd not yet tested > > > > HDD works, just the LED does not. Tested with the OE kernel. I'll retry > > with my custom .config file. It also enables more USB drivers. > > I'm using old driver, LED works there. What do I need to change to get > new one? Confirming - CF as hda controls LED, CF as sda does not. -- Stanislav Brabec http://www.penguin.cz/~utx/zaurus ___ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
Re: [Zaurus-devel] latest angstrom image + linux-2.6.38.4 report
Hi! > > > I just tested the latest angstrom image (built by myself). > > > > > > I seen following regressions in comparison with 2.6.26: > > > > > > - While booting from SD card, I seen kernel panic several times, but did > > > not have serial cable attached. I am not able to reproduce it any more, > > > even if I try to do the same. I only remember mmc_blk_issue_rw_rq at the > > > end of the screen. Did anybody else seen it. > > > > > Usually issues only booting from CF. IIRC spitz crashes on first > > reboot after kernel flashing if power cable is attached ?? > > Well, my home built USB cable to 500mA USB was attached. I tested it > later on battery or original power supply. Yes, it may be a reason of > these crashes. I'll retry with the weak USB power plug. (I never seen > weak-power-supply-crash with 2.6.26-RP). Yes, it is probably software problem. BTW online charging does not work _at all_. Connected with empty battery to (hopefully good) power supply at 10pm, battery was still empty at 7am :-(. > > > - HDD LED seems to not work. > > Hdd not yet tested > > HDD works, just the LED does not. Tested with the OE kernel. I'll retry > with my custom .config file. It also enables more USB drivers. I'm using old driver, LED works there. What do I need to change to get new one? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ___ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
Re: [Zaurus-devel] latest angstrom image + linux-2.6.38.4 report
Andrea Adami wrote: > On Fri, May 6, 2011 at 4:37 PM, Stanislav Brabec wrote: > > Hallo. > > > > I just tested the latest angstrom image (built by myself). > > > > I seen following regressions in comparison with 2.6.26: > > > > - While booting from SD card, I seen kernel panic several times, but did > > not have serial cable attached. I am not able to reproduce it any more, > > even if I try to do the same. I only remember mmc_blk_issue_rw_rq at the > > end of the screen. Did anybody else seen it. > > > Usually issues only booting from CF. IIRC spitz crashes on first > reboot after kernel flashing if power cable is attached ?? Well, my home built USB cable to 500mA USB was attached. I tested it later on battery or original power supply. Yes, it may be a reason of these crashes. I'll retry with the weak USB power plug. (I never seen weak-power-supply-crash with 2.6.26-RP). > > - I was not able to return from suspend (boot from SD, no reaction on > > On/Off press). I even suspect that my Zaurus seems to be warmer that it > > should be. Maybe CPU is not sleeping? > > > This seems to work (angstrom-console-image) http://paste.debian.net/116495/ Yes, it works, but not every time. > > - Xfbdev lack touchscreen support (libts does not understand the latest > > input device). I did not test Xorg yet. > > > > - tskeys are running at 100% CPU time (known bad design). > > Surely there are issues with tskeys/touchscreensee logs Good thing happened and now it works again in the OE image built yesterday from scratch. (Both tskeys and Xfbdev+tslib touchscreen.) And yet another good news: Xorg requires much less memory than a year ago. Fine tuning enabled modules may probably improve the number even a bit more. I already have a nice XKB keymap with two keymap switching hotkey, CapsLock support. I want to finish F-key support. > spitz -> http://paste.debian.net/116489 I see no sound as well - probably misconfiguration. > > - HDD LED seems to not work. > Hdd not yet tested HDD works, just the LED does not. Tested with the OE kernel. I'll retry with my custom .config file. It also enables more USB drivers. -- Stanislav Brabec http://www.penguin.cz/~utx/zaurus ___ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
