Re: [zfs-discuss] Performance issues with iSCSI under Linux
Here's a long due update for you all... After updating countless drivers, BIOSes and Nexenta, it seems that our issue has disappeared. We're slowly moving our production to our three appliances and things are going well so far. Sadly we don't know exactly what update fixed our issue. I wish I would know, but we tried so many different things that we lost count. We've also updated our DDRDrive X1s and they're giving us stellar performances. Thanks to the people and Nexenta and DDRDrive! It's been more challenging than we expected, but we're now optimistic about the future of all this. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Then set the zfs_write_limit_override to a reasonable value. Our first experiments are showing progress. We'll play with it some more and let you know. Thanks! Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
If you do a dd to the storage from the heads do you still get the same issues? On 31 Oct 2010 12:40, Ian D rewar...@hotmail.com wrote: I get that multi-cores doesn't necessarily better performances, but I doubt that both the latest AMD CPUs (the Magny-Cours) and the latest Intel CPUs (the Beckton) suffer from incredibly bad cache management. Our two test system have 2 and 4 of each respectively. The thing is that the performances are not consistently slow, they are great for a while and *stops* for a few seconds before they get great again. It's like they are choking or something... Thanks Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zf... ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
If you do a dd to the storage from the heads do you still get the same issues? no, local read/writes are great, they never choke. It's whenever NFS or iSCSI are involved and that the read/writes are done from a remote box that we experience the problem. Local operations barely affects the CPU load. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
What if you connect locally via NFS or iscsi? SR -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Check your TXG settings, it could be a timing issue, nagles issue, also TCP buffer issue. Check setup system properties. On 1 Nov 2010 19:36, SR rraj...@gmail.com wrote: What if you connect locally via NFS or iscsi? SR -- This message posted from opensolaris.org ___ zfs-dis... ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
- Original Message - Likely you don#39;t have enough ram or CPU in the box. The Nexenta box has 256G of RAM and the latest X7500 series CPUs. That said, the load does get crazy high (like 35+) very quickly. We can't figure out what's taking so much CPU. It happens even when checksum/compression/unduping are off. Is your data deduplicated? It won't get de-deduplicated if you merely turn off dedup. Dedup is not really stable atm, so that might be the problem Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Maybe you are experiencing this: http://opensolaris.org/jive/thread.jspa?threadID=119421 -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
You doubt AMD or Intel cpu's suffer from bad cache mgmt? In order to clear that out, we've tried using an older server (about 4 years old) as the head and we see the same pattern. It's actually more obvious that it consumes a whole lot of CPU cycles. Using the same box as a Linux-based NFS server and running the same tests barely has an impact on the CPUs. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Maybe you are experiencing this: http://opensolaris.org/jive/thread.jspa?threadID=11942 It does look like this... Is this really the expected behaviour? That's just unacceptable. It is so bad it sometimes drop connection and fail copies and SQL queries... Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On Nov 1, 2010, at 5:09 PM, Ian D rewar...@hotmail.com wrote: Maybe you are experiencing this: http://opensolaris.org/jive/thread.jspa?threadID=11942 It does look like this... Is this really the expected behaviour? That's just unacceptable. It is so bad it sometimes drop connection and fail copies and SQL queries... Then set the zfs_write_limit_override to a reasonable value. Depending on the speed of your ZIL and/or backing store (for async IO) you will need to limit the write size in such a way so TXG1 is fully committed before TXG2 fills. Myself, with a RAID controller with a 512MB BBU write-back cache I set the write limit to 512MB which allows my setup to commit-before-fill. It also prevents ARC from discarding good read cache data in favor of write cache. Others may have a good calculation based on ARC execution plan timings, disk seek and sustained throughput to give an accurate figure based on one's setup, otherwise start with a reasonable value, say 1GB, and decrease until the pauses stop. -Ross ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Ross Walker wrote: On Nov 1, 2010, at 5:09 PM, Ian D rewar...@hotmail.com wrote: Maybe you are experiencing this: http://opensolaris.org/jive/thread.jspa?threadID=11942 It does look like this... Is this really the expected behaviour? That's just unacceptable. It is so bad it sometimes drop connection and fail copies and SQL queries... Then set the zfs_write_limit_override to a reasonable value. Depending on the speed of your ZIL and/or backing store (for async IO) you will need to limit the write size in such a way so TXG1 is fully committed before TXG2 fills. Myself, with a RAID controller with a 512MB BBU write-back cache I set the write limit to 512MB which allows my setup to commit-before-fill. It also prevents ARC from discarding good read cache data in favor of write cache. Others may have a good calculation based on ARC execution plan timings, disk seek and sustained throughput to give an accurate figure based on one's setup, otherwise start with a reasonable value, say 1GB, and decrease until the pauses stop. -Ross If this is the root cause, it sounds like some default configuration parameters need to be calculated, determined and adjusted differently from how they are now. It is highly preferable that the default parameters do not exhibit severe problems. Defaults should offer stability and performance to the extent that stability is not compromised. (I.e. no dedupe by default under its current state). (Manually tweaked parameters are a different story in that they should allow a knowledgeable user to get a little more performance even if that is more risky). ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I get that multi-cores doesn't necessarily better performances, but I doubt that both the latest AMD CPUs (the Magny-Cours) and the latest Intel CPUs (the Beckton) suffer from incredibly bad cache management. Our two test system have 2 and 4 of each respectively. The thing is that the performances are not consistently slow, they are great for a while and *stops* for a few seconds before they get great again. It's like they are choking or something... Thanks Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss- boun...@opensolaris.org] On Behalf Of Ian D I get that multi-cores doesn't necessarily better performances, but I doubt that both the latest AMD CPUs (the Magny-Cours) and the latest Intel CPUs (the Beckton) suffer from incredibly bad cache management. You doubt AMD or Intel cpu's suffer from bad cache mgmt? I can't say if that problem affects you or not, but you shouldn't dismiss it just like that. Back when Pentium 4 was the latest greatest, I had a system that supported max 8G ram. It was originally built 4G, and worked fine. We later upgraded to 8G, and as long as it used 8G ram, it performed about 1% of normal capacity. The root cause was something like insufficient cache on the cpu. The solution was to run with 4G of ram, and no more. Probably not anything like what you're experiencing, but the point is, yes that sort of thing can happen in real life. And if you think that's bad, imagine what it must have been like back when the Pentium-1 chip was first being discovered to have the floating point division error... ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I owe you all an update... We found out a clear pattern we can now recreate at will. Whenever we read/write the pool, it gives expected throughput and IOPS for a while, but at some point it slows down to a crawl, nothing is responding and pretty much hang for a few seconds and then things go back to normal for a little more while. Sometimes the problem is barely noticeable and only happen once every few minutes, at other times it is every few seconds. We could be doing the exact same operation and sometimes it is fast and sometimes it is slow. The more clients are connected the worse the problem typically gets- and no, it's not happening every 30 seconds when things are committed to disk. Now... every time that slow down occurs, the load on the Nexenta box gets crazy high- it can reach 35 and more and the console dont even respond anymore. The rest of the time the load barely reaches 3. The box has four 7500 series Intel Xeon CPUs and 256G of RAM and use 15K SAS HDDs in mirrored stripes on LSI 9200-8e HBAs- so we're certainly not underpowered. We also have the same issue when using a box with two of the latest AMD Opteron CPUs (the Magny-Cours) and 128G of RAM. We are able to reach 800MB/sec and more over the network when things go well, but the average get destroyed by the slow downs when there is zero throughput. These tests are run without any L2ARC or SLOG, but past tests have shown the same issue when using them. We've tried with 12x 100G Samsung SLC SSDs and DDRDrive X1s among other thing- and while they make the whole thing much faster, they don't prevent those intermittent slow downs from happening. Our next step is to isolate the process that take all that CPU... Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
So maybe a next step is to run zilstat, arcstat, iostat -xe?? (I forget what people like to use for these params), zpool iostat -v in 4 term windows while running the same test and try to see what is spiking when that high load period occurs. Not sure if there is a better version than this: http://www.solarisinternals.com/wiki/index.php/Arcstat Richard's zilstat: http://blog.richardelling.com/2009/02/zilstat-improved.html Other arc tools: http://vt-100.blogspot.com/2010/03/top-with-zfs-arc.html http://www.cuddletech.com/blog/pivot/entry.php?id=979 On 10/30/10 5:48 AM, Ian D wrote: I owe you all an update... We found out a clear pattern we can now recreate at will. Whenever we read/write the pool, it gives expected throughput and IOPS for a while, but at some point it slows down to a crawl, nothing is responding and pretty much hang for a few seconds and then things go back to normal for a little more while. Sometimes the problem is barely noticeable and only happen once every few minutes, at other times it is every few seconds. We could be doing the exact same operation and sometimes it is fast and sometimes it is slow. The more clients are connected the worse the problem typically gets- and no, it's not happening every 30 seconds when things are committed to disk. Now... every time that slow down occurs, the load on the Nexenta box gets crazy high- it can reach 35 and more and the console dont even respond anymore. The rest of the time the load barely reaches 3. The box has four 7500 series Intel Xeon CPUs and 256G of RAM and use 15K SAS HDDs in mirrored stripes on LSI 9200-8e HBAs- so we're certainly not underpowered. We also have the same issue when using a box with two of the latest AMD Opteron CPUs (the Magny-Cours) and 128G of RAM. We are able to reach 800MB/sec and more over the network when things go well, but the average get destroyed by the slow downs when there is zero throughput. These tests are run without any L2ARC or SLOG, but past tests have shown the same issue when using them. We've tried with 12x 100G Samsung SLC SSDs and DDRDrive X1s among other thing- and while they make the whole thing much faster, they don't prevent those intermittent slow downs from happening. Our next step is to isolate the process that take all that CPU... Ian ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Here is a total guess - but what if it has to do with zfs processing running on one CPU having to talk to the memory owned by a different CPU? I don't know if many people are running fully populated boxes like you are, so maybe it is something people are not seeing due to not having huge amounts of ram on these new multichip transport systems. Maybe you could test it by going to 1 Mangy-Cours CPU and just the memory populated for that one on your AMD box and see if you get the same periodic high loads. On 10/30/10 5:48 AM, Ian D wrote: I owe you all an update... We found out a clear pattern we can now recreate at will. Whenever we read/write the pool, it gives expected throughput and IOPS for a while, but at some point it slows down to a crawl, nothing is responding and pretty much hang for a few seconds and then things go back to normal for a little more while. Sometimes the problem is barely noticeable and only happen once every few minutes, at other times it is every few seconds. We could be doing the exact same operation and sometimes it is fast and sometimes it is slow. The more clients are connected the worse the problem typically gets- and no, it's not happening every 30 seconds when things are committed to disk. Now... every time that slow down occurs, the load on the Nexenta box gets crazy high- it can reach 35 and more and the console dont even respond anymore. The rest of the time the load barely reaches 3. The box has four 7500 series Intel Xeon CPUs and 256G of RAM and use 15K SAS HDDs in mirrored stripes on LSI 9200-8e HBAs- so we're certainly not underpowered. We also have the same issue when using a box with two of the latest AMD Opteron CPUs (the Magny-Cours) and 128G of RAM. We are able to reach 800MB/sec and more over the network when things go well, but the average get destroyed by the slow downs when there is zero throughput. These tests are run without any L2ARC or SLOG, but past tests have shown the same issue when using them. We've tried with 12x 100G Samsung SLC SSDs and DDRDrive X1s among other thing- and while they make the whole thing much faster, they don't prevent those intermittent slow downs from happening. Our next step is to isolate the process that take all that CPU... Ian ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
We had the same issue with a 24 core box a while ago. Check your l2 cache hits and misses. Sometimes more cores does not mean more performance dtrace is your friend! On 30 Oct 2010 14:12, zfs user zf...@itsbeen.sent.com wrote: Here is a total guess - but what if it has to do with zfs processing running on one CPU having to talk to the memory owned by a different CPU? I don't know if many people are running fully populated boxes like you are, so maybe it is something people are not seeing due to not having huge amounts of ram on these new multichip transport systems. Maybe you could test it by going to 1 Mangy-Cours CPU and just the memory populated for that one on your AMD box and see if you get the same periodic high loads. On 10/30/10 5:48 AM, Ian D wrote: I owe you all an update... We found out a clear pattern we can now recreate at will. Whenev... ___ zfs-discuss mailing list zfs-disc...@opensolaris.or... ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On Sat, Oct 30, 2010 at 02:10:49PM -0700, zfs user wrote: 1 Mangy-Cours CPU ^ Dunno whether deliberate, or malapropism, but I love it. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
If you take a look at http://www.brendangregg.com/cachekit.html you will see some DTrace yummyness which should let you tell... --- W. A. Khushil Dep - khushil@gmail.com - 07905374843 Visit my blog at http://www.khushil.com/ On 30 October 2010 15:49, Eugen Leitl eu...@leitl.org wrote: On Sat, Oct 30, 2010 at 02:10:49PM -0700, zfs user wrote: 1 Mangy-Cours CPU ^ Dunno whether deliberate, or malapropism, but I love it. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I did it deliberately - how dumb are these product managers that they name products with weird names and not expect them to be abused? On the other hand, if you do a search for mangy cours you'll find a bunch of hits where it is clearly a misspelling on serious tech articles, postings, etc. I am seeing some spotty performance with my new Mangy Cours CPU... It is like they are asking for it. I think they be better off doing something like Intel core arch names using city names Santa Rosa, etc. On 10/30/10 3:49 PM, Eugen Leitl wrote: On Sat, Oct 30, 2010 at 02:10:49PM -0700, zfs user wrote: 1 Mangy-Cours CPU ^ Dunno whether deliberate, or malapropism, but I love it. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On 10/30/2010 7:07 PM, zfs user wrote: I did it deliberately - how dumb are these product managers that they name products with weird names and not expect them to be abused? On the other hand, if you do a search for mangy cours you'll find a bunch of hits where it is clearly a misspelling on serious tech articles, postings, etc. I am seeing some spotty performance with my new Mangy Cours CPU... It is like they are asking for it. I think they be better off doing something like Intel core arch names using city names Santa Rosa, etc. On 10/30/10 3:49 PM, Eugen Leitl wrote: On Sat, Oct 30, 2010 at 02:10:49PM -0700, zfs user wrote: 1 Mangy-Cours CPU ^ Dunno whether deliberate, or malapropism, but I love it. ___ Well, First off, it's Magny Cours, not Mangy Cours. Though, to an English-speaker, the letter reversal (and mispronunciation) come easily. AMD does use City names. Just not American ones. Magny-Cours is a place in France (near a well-known Formula One circuit). So far as I can tell, their (recent) platform names seem to be English nouns, and the CPU architectures European ones. But who knows how people think of codenames. Frankly, I get really annoyed with Intel's penchance to put a codename on every little last thing, and change them at the drop of a hat. I get Intel pre-production hardware here, and there's a half-dozen codenames on each server. Makes keeping track of what's what a nightmare. -- Erik Trimble Java System Support Mailstop: usca22-123 Phone: x17195 Santa Clara, CA ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Right, I realized it was Magny not Mangy, but I thought it was related to the race track or racing not a town. I completely agree with you on codenames, the Linux distro codename irk me - hey, guys it might be easy for you to keep track of which release is Bushy Beaver or Itchy Ibis or Mayonnaise but if you deal with many products like I do, it would be a blessing to get just a sane pattern of increasing numbers or number-2_or_3_letters or something that gives a clue to where this X falls within the spectrum of the Y product lifetime and if I am wishing - a _dedicated_ web page that lists each release with a freaking date (I have a long separate rant about how tech articles don't seem to include dates and production version numbers of the products that they are writing about) and a short blurb about what changed. On 10/30/10 8:02 PM, Erik Trimble wrote: On 10/30/2010 7:07 PM, zfs user wrote: I did it deliberately - how dumb are these product managers that they name products with weird names and not expect them to be abused? On the other hand, if you do a search for mangy cours you'll find a bunch of hits where it is clearly a misspelling on serious tech articles, postings, etc. I am seeing some spotty performance with my new Mangy Cours CPU... It is like they are asking for it. I think they be better off doing something like Intel core arch names using city names Santa Rosa, etc. On 10/30/10 3:49 PM, Eugen Leitl wrote: On Sat, Oct 30, 2010 at 02:10:49PM -0700, zfs user wrote: 1 Mangy-Cours CPU ^ Dunno whether deliberate, or malapropism, but I love it. ___ Well, First off, it's Magny Cours, not Mangy Cours. Though, to an English-speaker, the letter reversal (and mispronunciation) come easily. AMD does use City names. Just not American ones. Magny-Cours is a place in France (near a well-known Formula One circuit). So far as I can tell, their (recent) platform names seem to be English nouns, and the CPU architectures European ones. But who knows how people think of codenames. Frankly, I get really annoyed with Intel's penchance to put a codename on every little last thing, and change them at the drop of a hat. I get Intel pre-production hardware here, and there's a half-dozen codenames on each server. Makes keeping track of what's what a nightmare. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
A network switch that is being maxed out? Some switches cannot switch at rated line speed on all their ports all at the same time. Their internal buses simply don't have the bandwidth needed for that. Maybe you are running into that limit? (I know you mentioned bypassing the switch completely in some other tests and not noticing any difference.) We're using a 10GbE switch and NICs and they have their own separate network- we're not even close to the limit. Thanks -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Likely you don#39;t have enough ram or CPU in the box. The Nexenta box has 256G of RAM and the latest X7500 series CPUs. That said, the load does get crazy high (like 35+) very quickly. We can't figure out what's taking so much CPU. It happens even when checksum/compression/unduping are off. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I don't think the switch model was ever identified...perhaps it is a 1 GbE switch with a few 10 GbE ports?nbsp; (Drawing at straws.) p It is a a Dell 8024F. It has 24 SPF+ 10GbE ports and every NICs we connect to it are Intel X520. One issue we do have with it is when we turn jumbo frames on, the linux boxes crashes. So all our tests are done without jumbo frames, but that alone cannot make that much of a difference. We know the hardware of the Nexenta box can do several times better- it does when we run Linux on it. What happens when Windows is the iSCSI initiator connecting to an iSCSI target on ZFS?nbsp; If that is also slow, the issue is likely not in Windows or in Linux.br br Do CIFS shares (connected to from Linux and from Windows) show the same performance problems as iSCSI and NFS?nbsp; If yes, this would suggest a common cause item on the ZFS side.br p We need to try that. We did try two versions of Linux (RedHat and SuSE) and ended up with the same problem, but we haven't tried with Windows/Mac yet. Thanks all! Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On Oct 23, 2010, at 4:31 AM, Ian D wrote: Likely you don#39;t have enough ram or CPU in the box. The Nexenta box has 256G of RAM and the latest X7500 series CPUs. That said, the load does get crazy high (like 35+) very quickly. We can't figure out what's taking so much CPU. It happens even when checksum/compression/unduping are off. To see how many threads are running for a process, use prstat. -- richard -- OpenStorage Summit, October 25-27, Palo Alto, CA http://nexenta-summit2010.eventbrite.com USENIX LISA '10 Conference, November 7-12, San Jose, CA ZFS and performance consulting http://www.RichardElling.com ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Some numbers... zpool status pool: Pool_sas state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM Pool_sas ONLINE 0 0 0 c4t5000C506A6D3d0 ONLINE 0 0 0 c4t5000C506A777d0 ONLINE 0 0 0 c4t5000C506AA43d0 ONLINE 0 0 0 c4t5000C506AC4Fd0 ONLINE 0 0 0 c4t5000C506AEF7d0 ONLINE 0 0 0 c4t5000C506B27Fd0 ONLINE 0 0 0 c4t5000C506B28Bd0 ONLINE 0 0 0 c4t5000C506B46Bd0 ONLINE 0 0 0 c4t5000C506B563d0 ONLINE 0 0 0 c4t5000C506B643d0 ONLINE 0 0 0 c4t5000C506B6D3d0 ONLINE 0 0 0 c4t5000C506BBE7d0 ONLINE 0 0 0 c4t5000C506C407d0 ONLINE 0 0 0 c4t5000C506C657d0 ONLINE 0 0 0 errors: No known data errors pool: Pool_test state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM Pool_testONLINE 0 0 0 c4t5000C5002103F093d0 ONLINE 0 0 0 c4t5000C50021101683d0 ONLINE 0 0 0 c4t5000C50021102AA7d0 ONLINE 0 0 0 c4t5000C500211034D3d0 ONLINE 0 0 0 c4t5000C500211035DFd0 ONLINE 0 0 0 c4t5000C5002110480Fd0 ONLINE 0 0 0 c4t5000C50021104F0Fd0 ONLINE 0 0 0 c4t5000C50021119A43d0 ONLINE 0 0 0 c4t5000C5002112392Fd0 ONLINE 0 0 0 errors: No known data errors pool: syspool state: ONLINE scan: none requested config: NAMESTATE READ WRITE CKSUM syspool ONLINE 0 0 0 c0t0d0s0 ONLINE 0 0 0 errors: No known data errors = Pool_sas is made of 14x 146G 15K SAS Drives in a big stripe. For this test there is no log device or cache. Connected to it is a RedHat box using iSCSI through an Intel X520 10GbE NIC. It runs several large MySQL queries at once- each taking minutes to compute. Pool_test is a stripe of 2TB SATA drives and a terrabyte of files is being copied to it for another box during this test. Here's the pastebin of iostat -xdn 10 on the Linux box: http://pastebin.com/431ESYaz Here's the pastebin of iostat -xdn 10 on the Nexenta box: http://pastebin.com/9g7KD3Ku Here's the pastebin zpool iostat -v 10 on the Nexenta box: http://pastebin.com/05fJL5sw From these numbers it looks like the Linux box is waiting for data all the time while the Nexenta box isn't pulling nearly as much throughput and IOPS as it could. Where is the bottleneck? One thing suspicious is that we notice a slow down of one pool when the other is under load. How can that be? Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
One thing suspicious is that we notice a slow down of one pool when the other is under load. How can that be? Ian A network switch that is being maxed out? Some switches cannot switch at rated line speed on all their ports all at the same time. Their internal buses simply don't have the bandwidth needed for that. Maybe you are running into that limit? (I know you mentioned bypassing the switch completely in some other tests and not noticing any difference.) Any other hardware in common? ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On Fri, Oct 22, 2010 at 10:40 PM, Haudy Kazemi kaze0...@umn.edu wrote: One thing suspicious is that we notice a slow down of one pool when the other is under load. How can that be? Ian A network switch that is being maxed out? Some switches cannot switch at rated line speed on all their ports all at the same time. Their internal buses simply don't have the bandwidth needed for that. Maybe you are running into that limit? (I know you mentioned bypassing the switch completely in some other tests and not noticing any difference.) Any other hardware in common? There's almost 0 chance a switch is being overrun by a single gigE connection. The worst switch I've seen is roughly 8:1 oversubscribed. You'd have to be maxing out many, many ports for a switch to be a problem. Likely you don't have enough ram or CPU in the box. --Tim ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
What more info could you provide? Quite a lot more, actually, like: how many streams of SQL and copy are you running? how are the filesystems/zvols configured (recordsize, etc)? some CPU, VM and network stats would also be nice. Based on the nexenta iostats you've provided (a tiny window on what's happening), it appears that you have an 8k recordsize for SQL. If you add up all the IOPS for the SQL, it's roughly 2000 reads at around 3ms each. Which might indicate at least 6 reads outstanding at any time. So how many queries do you have running in parallel? If you add more, I'd expect the service times to increase. 3ms isn't much for spinning rust, but isn't this why you are planning to use lots of L2ARC? Could be a similar story on writes. How many parallel streams? How many files? What's the average file size? What's the client filesysyem? How much does it sync to the server? Could it be that your client apps are always waiting for the spinning rust? Does an SSD log make any difference on this pool? Sent from my iPhone On 22 Oct 2010, at 19:57, Ian D rewar...@hotmail.com wrote: Some numbers... zpool status pool: Pool_sas state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM Pool_sas ONLINE 0 0 0 c4t5000C506A6D3d0 ONLINE 0 0 0 c4t5000C506A777d0 ONLINE 0 0 0 c4t5000C506AA43d0 ONLINE 0 0 0 c4t5000C506AC4Fd0 ONLINE 0 0 0 c4t5000C506AEF7d0 ONLINE 0 0 0 c4t5000C506B27Fd0 ONLINE 0 0 0 c4t5000C506B28Bd0 ONLINE 0 0 0 c4t5000C506B46Bd0 ONLINE 0 0 0 c4t5000C506B563d0 ONLINE 0 0 0 c4t5000C506B643d0 ONLINE 0 0 0 c4t5000C506B6D3d0 ONLINE 0 0 0 c4t5000C506BBE7d0 ONLINE 0 0 0 c4t5000C506C407d0 ONLINE 0 0 0 c4t5000C506C657d0 ONLINE 0 0 0 errors: No known data errors pool: Pool_test state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM Pool_testONLINE 0 0 0 c4t5000C5002103F093d0 ONLINE 0 0 0 c4t5000C50021101683d0 ONLINE 0 0 0 c4t5000C50021102AA7d0 ONLINE 0 0 0 c4t5000C500211034D3d0 ONLINE 0 0 0 c4t5000C500211035DFd0 ONLINE 0 0 0 c4t5000C5002110480Fd0 ONLINE 0 0 0 c4t5000C50021104F0Fd0 ONLINE 0 0 0 c4t5000C50021119A43d0 ONLINE 0 0 0 c4t5000C5002112392Fd0 ONLINE 0 0 0 errors: No known data errors pool: syspool state: ONLINE scan: none requested config: NAMESTATE READ WRITE CKSUM syspool ONLINE 0 0 0 c0t0d0s0 ONLINE 0 0 0 errors: No known data errors = Pool_sas is made of 14x 146G 15K SAS Drives in a big stripe. For this test there is no log device or cache. Connected to it is a RedHat box using iSCSI through an Intel X520 10GbE NIC. It runs several large MySQL queries at once- each taking minutes to compute. Pool_test is a stripe of 2TB SATA drives and a terrabyte of files is being copied to it for another box during this test. Here's the pastebin of iostat -xdn 10 on the Linux box: http://pastebin.com/431ESYaz Here's the pastebin of iostat -xdn 10 on the Nexenta box: http://pastebin.com/9g7KD3Ku Here's the pastebin zpool iostat -v 10 on the Nexenta box: http://pastebin.com/05fJL5sw From these numbers it looks like the Linux box is waiting for data all the time while the Nexenta box isn't pulling nearly as much throughput and IOPS as it could. Where is the bottleneck? One thing suspicious is that we notice a slow down of one pool when the other is under load. How can that be? Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Tim Cook wrote: On Fri, Oct 22, 2010 at 10:40 PM, Haudy Kazemi kaze0...@umn.edu mailto:kaze0...@umn.edu wrote: One thing suspicious is that we notice a slow down of one pool when the other is under load. How can that be? Ian A network switch that is being maxed out? Some switches cannot switch at rated line speed on all their ports all at the same time. Their internal buses simply don't have the bandwidth needed for that. Maybe you are running into that limit? (I know you mentioned bypassing the switch completely in some other tests and not noticing any difference.) Any other hardware in common? There's almost 0 chance a switch is being overrun by a single gigE connection. The worst switch I've seen is roughly 8:1 oversubscribed. You'd have to be maxing out many, many ports for a switch to be a problem. Likely you don't have enough ram or CPU in the box. --Tim I agree, but also trying not to assume anything. Looking back, Ian's first email said '10GbE on a dedicated switch'. I don't think the switch model was ever identified...perhaps it is a 1 GbE switch with a few 10 GbE ports? (Drawing at straws.) What happens when Windows is the iSCSI initiator connecting to an iSCSI target on ZFS? If that is also slow, the issue is likely not in Windows or in Linux. Do CIFS shares (connected to from Linux and from Windows) show the same performance problems as iSCSI and NFS? If yes, this would suggest a common cause item on the ZFS side. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Ian, It would help to have some config detail (e.g. what options are you using? zpool status output; property lists for specific filesystems and zvols; etc) Some basic Solaris stats can be very helpful too (e.g. peak flow samples of vmstat 1, mpstst 1, iostat -xnz 1, etc) It would also be great to know how you are running you tests. I'd also like to know what version of NFS and mount options. A network trace down to NFS RPC or iSCSI operation level with timings would be great too. I'm wondering whether your HBA has a write through or write back cache enabled? The latter might make things very fast, but could put data at risk if not sufficiently non-volatile. Cheers, Phil On 14 Oct 2010, at 22:02, Ian D rewar...@hotmail.com wrote: Our next test is to try with a different kind of HBA, we have a Dell H800 lying around. ok... we're making progress. After swapping the LSI HBA for a Dell H800 the issue disappeared. Now, I'd rather not use those controllers because they don't have a JBOD mode. We have no choice but to make individual RAID0 volumes for each disks which means we need to reboot the server every time we replace a failed drive. That's not good... What can we do with the LSI HBA? Would you call LSI's support? Is there anything we should try besides the obvious (using the latests firmware/driver)? To resume the issue, when we copy files from/to the JBODs connected to that HBA using NFS/iSCSI, we get slow transfer rate 20M/s and a 1-2 second pause between each file. When we do the same experiment locally using the external drives as a local volume (no NFS/iSCSI involved) then it goes upward of 350M/sec with no delay between files. Ian Message was edited by: reward72 -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss- boun...@opensolaris.org] On Behalf Of Phil Harman I'm wondering whether your HBA has a write through or write back cache enabled? The latter might make things very fast, but could put data at risk if not sufficiently non-volatile. He already said he has SSD's for dedicated log. This means the best solution is to disable WriteBack and just use WriteThrough. Not only is it more reliable than WriteBack, it's faster. And I know I've said this many times before, but I don't mind repeating: If you have slog devices, then surprisingly, it actually hurts performance to enable the WriteBack on the HBA. Think of it like this: Speed of a naked disk: 1.0 Speed of a disk with WriteBack: 2.2 Speed of a disk with slog and WB: 2.8 Speed of a disk with slog and no WB: 3.0 Of course those are really rough numbers, that vary by architecture and usage patterns. But you get the idea. The consistent result is that disk with slog is the fastest, with WB disabled. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
As I have mentioned already, we have the same performance issues whether we READ or we WRITE to the array, shouldn't that rule out caching issues? Also we can get great performances with the LSI HBA if we use the JBODs as a local file system. The issues only arise when it is done through iSCSI and NFS. I'm opening tickets with LSI to see if they can help. Thanks all! Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
He already said he has SSD's for dedicated log. This means the best solution is to disable WriteBack and just use WriteThrough. Not only is it more reliable than WriteBack, it's faster. And I know I've said this many times before, but I don't mind repeating: If you have slog devices, then surprisingly, it actually hurts performance to enable the WriteBack on the HBA. The HBA who gives us problem is a LSI 9200-16e which has no cache whatsoever. We do get great performances with a Dell H800 that has cache. We'll use H800s if we have to, but i really would like to find a way to make the LSI's work. Thanks! -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I've had a few people sending emails directly suggesting it might have something to do with the ZIL/SLOG. I guess I should have said that the issue happen both ways, whether we copy TO or FROM the Nexenta box. You mentioned a second Nexenta box earlier. To rule out client-side issues, have you considered testing with Nexenta as the iSCSI/NFS client? -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
As I have mentioned already, it would be useful to know more about the config, how the tests are being done, and to see some basic system performance stats. On 15/10/2010 15:58, Ian D wrote: As I have mentioned already, we have the same performance issues whether we READ or we WRITE to the array, shouldn't that rule out caching issues? Also we can get great performances with the LSI HBA if we use the JBODs as a local file system. The issues only arise when it is done through iSCSI and NFS. I'm opening tickets with LSI to see if they can help. Thanks all! Ian ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
You mentioned a second Nexenta box earlier. To rule out client-side issues, have you considered testing with Nexenta as the iSCSI/NFS client? If you mean running the NFS client AND server on the same box then yes, and it doesn't show the same performance issues. It's only when a Linux box SEND/RECEIVE data to the NFS/iSCSI shares that we have problems. But if the Linux box send/receive file through scp on the external disks mounted by the Nexenta box as a local filesystem then there is no problem. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
As I have mentioned already, it would be useful to know more about the onfig, how the tests are being done, and to see some basic system performance stats. I will shortly. Thanks! -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On 15/10/2010 19:09, Ian D wrote: It's only when a Linux box SEND/RECEIVE data to the NFS/iSCSI shares that we have problems. But if the Linux box send/receive file through scp on the external disks mounted by the Nexenta box as a local filesystem then there is no problem. Does the Linux box have the same issue to any other server ? What if the client box isn't Linux but Solaris or Windows or MacOS X ? -- Darren J Moffat ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Does the Linux box have the same issue to any other server ? What if the client box isn't Linux but Solaris or Windows or MacOS X ? That would be a good test. We'll try that. -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
After contacting LSI they say that the 9200-16e HBA is not supported in OpenSolaris, just Solaris. Aren't Solaris drivers the same as OpenSolaris? Is there anyone here using 9200-16e HBAs? What about the 9200-8e? We have a couple lying around and we'll test one shortly. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
A little setback We found out that we also have the issue with the Dell H800 controllers, not just the LSI 9200-16e. With the Dell it's initially faster as we benefit from the cache, but after a little while it goes sour- from 350MB/sec down to less than 40MB/sec. We've also tried with a LSI 9200-8e with the same results. So to recap... No matter what HBA we use, copying through the network to/from the external drives is painfully slow when access is done through either NFS or iSCSI. HOWEVER, it is plenty fast when we do a scp where the data is written to the external drives (or internal ones for that matter) when they are seen by the Nexenta box as local drives- ie when neither NFS or iSCSI are involved. What now? :) -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On 15 oct. 2010, at 22:19, Ian D wrote: A little setback We found out that we also have the issue with the Dell H800 controllers, not just the LSI 9200-16e. With the Dell it's initially faster as we benefit from the cache, but after a little while it goes sour- from 350MB/sec down to less than 40MB/sec. We've also tried with a LSI 9200-8e with the same results. So to recap... No matter what HBA we use, copying through the network to/from the external drives is painfully slow when access is done through either NFS or iSCSI. HOWEVER, it is plenty fast when we do a scp where the data is written to the external drives (or internal ones for that matter) when they are seen by the Nexenta box as local drives- ie when neither NFS or iSCSI are involved. Sounds an awful lot like client side issues coupled possibly with networking problems. Have you looked into disabling the Nagle algorithm on the client side? That's something that can impact both iSCSI and NFS badly, but ssh is usually not as affected... I vaguely remember that being a real performance killer on some Linux versions. Another thing to check would be ensure that noatime is set so that your reads aren't triggering writes across the network as well. Cheers, Erik ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
-Original Message- From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss-boun...@opensolaris.org] On Behalf Of Ian D Sent: Friday, October 15, 2010 4:19 PM To: zfs-discuss@opensolaris.org Subject: Re: [zfs-discuss] Performance issues with iSCSI under Linux A little setback We found out that we also have the issue with the Dell H800 controllers, not just the LSI 9200-16e. With the Dell it's initially faster as we benefit from the cache, but after a little while it goes sour- from 350MB/sec down to less than 40MB/sec. We've also tried with a LSI 9200-8e with the same results. So to recap... No matter what HBA we use, copying through the network to/from the external drives is painfully slow when access is done through either NFS or iSCSI. HOWEVER, it is plenty fast when we do a scp where the data is written to the external drives (or internal ones for that matter) when they are seen by the Nexenta box as local drives- ie when neither NFS or iSCSI are involved. Has anyone suggested either removing L2ARC/SLOG entirely or relocating them so that all devices are coming off the same controller? You've swapped the external controller but the H700 with the internal drives could be the real culprit. Could there be issues with cross-controller IO in this case? Does the H700 use the same chipset/driver as the other controllers you've tried? I don't have a good understanding of where the various software components here fit together, but it seems like the problem is not with the controller(s) but with whatever is queueing network IO requests to the storage subsystem (or controlling queues/buffers/etc for this). Do NFS and iSCSI share a code path for this? -Will ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Has anyone suggested either removing L2ARC/SLOG entirely or relocating them so that all devices are coming off the same controller? You've swapped the external controller but the H700 with the internal drives could be the real culprit. Could there be issues with cross-controller IO in this case? Does the H700 use the same chipset/driver as the other controllers you've tried? We'll try that. We have a couple other devices we could use for the SLOG like a DDRDrive X1 and an OCZ Z-Drive which are both PCIe cards and don't use the local controller. Thanks -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On Oct 15, 2010, at 5:34 PM, Ian D rewar...@hotmail.com wrote: Has anyone suggested either removing L2ARC/SLOG entirely or relocating them so that all devices are coming off the same controller? You've swapped the external controller but the H700 with the internal drives could be the real culprit. Could there be issues with cross-controller IO in this case? Does the H700 use the same chipset/driver as the other controllers you've tried? We'll try that. We have a couple other devices we could use for the SLOG like a DDRDrive X1 and an OCZ Z-Drive which are both PCIe cards and don't use the local controller. What mount options are you using on the Linux client for the NFS share? -Ross ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
On 13 oct. 2010, at 18:37, Marty Scholes wrote: The only thing that still stands out is that network operations (iSCSI and NFS) to external drives are slow, correct? Just for completeness, what happens if you scp a file to the three different pools? If the results are the same as NFS and iSCSI, then I think the network can be ruled out. I would be leaning toward thinking there is some mismatch between the network protocols and the external controllers/cables/arrays. Sounding more and more like a networking issue - are the network cards set up in an aggregate? I had some similar issues on GbE where there was a mismatch between the aggregate settings on the switches and the LACP settings on the server. Basically the network was wasting a ton of time trying to renegotiate the LACP settings and slowing everything down. Ditto for the Linux networking - single port or aggregated dual port? Erik ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Sounding more and more like a networking issue - are the network cards set up in an aggregate? I had some similar issues on GbE where there was a mismatch between the aggregate settings on the switches and the LACP settings on the server. Basically the network was wasting a ton of time trying to renegotiate the LACP settings and slowing everything down. Ditto for the Linux networking - single port or aggregated dual port? We're only using one port on both boxes (we never have been able to saturate them yet), but maybe they are somehow set wrong. We'll investigate. -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I've had a few people sending emails directly suggesting it might have something to do with the ZIL/SLOG. I guess I should have said that the issue happen both ways, whether we copy TO or FROM the Nexenta box. -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Our next test is to try with a different kind of HBA, we have a Dell H800 lying around. ok... we're making progress. After swapping the LSI HBA for a Dell H800 the issue disappeared. Now, I'd rather not use those controllers because they don't have a JBOD mode. We have no choice but to make individual RAID0 volumes for each disks which means we need to reboot the server every time we replace a failed drive. That's not good... What can we do with the LSI HBA? Would you call LSI's support? Is there anything we should try besides the obvious (using the latests firmware/driver)? To resume the issue, when we copy files from/to the JBODs connected to that HBA using NFS/iSCSI, we get slow transfer rate 20M/s and a 1-2 second pause between each file. When we do the same experiment locally using the external drives as a local volume (no NFS/iSCSI involved) then it goes upward of 350M/sec with no delay between files. Ian Message was edited by: reward72 -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
rewar...@hotmail.com said: ok... we're making progress. After swapping the LSI HBA for a Dell H800 the issue disappeared. Now, I'd rather not use those controllers because they don't have a JBOD mode. We have no choice but to make individual RAID0 volumes for each disks which means we need to reboot the server every time we replace a failed drive. That's not good... Earlier you said you had eliminated the ZIL as an issue, but one difference between the Dell H800 and the LSI HBA is that the H800 has an NV cache (if you have the battery backup present). A very simple test would be when things are running slow, try disabling the ZIL temporarily, to see if that makes things go fast. Regards, Marion ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Earlier you said you had eliminated the ZIL as an issue, but one difference between the Dell H800 and the LSI HBA is that the H800 has an NV cache (if you have the battery backup present). A very simple test would be when things are running slow, try disabling the ZIL temporarily, to see if that makes things go fast. We'll try that, but keep in mind that we're having the issue even when we READ from the JBODs, not just during WRITES. -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss- boun...@opensolaris.org] On Behalf Of Ian D ok... we're making progress. After swapping the LSI HBA for a Dell H800 the issue disappeared. Now, I'd rather not use those controllers because they don't have a JBOD mode. We have no choice but to make individual RAID0 volumes for each disks which means we need to reboot the server every time we replace a failed drive. That's not good... I believe those are rebranded LSI controllers. I know the PERC controllers are. I use MegaCLI on Perc systems for this purpose. You should be able to find a utility which allows you to do this sort of thing while the OS is running. If you happen to find that MegaCLI is the right tool for your hardware, let me know, and I'll paste a few commands here, which will simplify your life. When I first started using it, I found it terribly cumbersome. But now I've gotten used to it, and MegaCLI commands just roll off the tongue. To resume the issue, when we copy files from/to the JBODs connected to that HBA using NFS/iSCSI, we get slow transfer rate 20M/s and a 1-2 second pause between each file. When we do the same experiment locally using the external drives as a local volume (no NFS/iSCSI involved) then it goes upward of 350M/sec with no delay between files. Baffling. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux [SEC=UNCLASSIFIED]
0n Thu, Oct 14, 2010 at 09:54:09PM -0400, Edward Ned Harvey wrote: If you happen to find that MegaCLI is the right tool for your hardware, let me know, and I'll paste a few commands here, which will simplify your life. When I first started using it, I found it terribly cumbersome. But now I've gotten used to it, and MegaCLI commands just roll off the tongue. can you paste them anyway ? -Alex IMPORTANT: This email remains the property of the Department of Defence and is subject to the jurisdiction of section 70 of the Crimes Act 1914. If you have received this email in error, you are requested to contact the sender and delete the email. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux [SEC=UNCLASSIFIED]
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss-
boun...@opensolaris.org] On Behalf Of Wilkinson, Alex
can you paste them anyway ?
Note: If you have more than one adapter, I believe you can specify -aALL in
the commands below, instead of -a0
I have 2 disks (slots 4 5) that are removable and rotate offsite for
backups.
To remove disks safely:
zpool export removable-pool
export EnclosureID=`MegaCli -PDList -a0 | grep 'Enclosure Device ID' |
uniq | sed 's/.* //'`
for DriveNum in 4 5 ; do MegaCli -PDOffline
PhysDrv[${EnclosureID}:${DriveNum}] -a0 ; done
Disks blink alternate orange green. Safe to remove.
To insert disks safely:
Insert disks.
MegaCli -CfgForeign -Clear -a0
MegaCli -CfgEachDskRaid0 -a0
devfsadm -Cv
zpool import -a
To clear foreign config off drives:
MegaCli -CfgForeign -Clear -a0
To create a one-disk raid0 for each disk that's not currently part of
another group:
MegaCli -CfgEachDskRaid0 -a0
To configure all drives WriteThrough
MegaCli -LDSetProp WT Lall -aALL
To configure all drives WriteBack
MegaCli -LDSetProp WB Lall -aALL
___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Here are some more findings... The Nexenta box has 3 pools: syspool: made of 2 mirrored (hardware RAID) local SAS disks pool_sas: made of 22 15K SAS disks in ZFS mirrors on 2 JBODs on 2 controllers pool_sata: made of 42 SATA disks in 6 RAIDZ2 vdevs on a single controller When we copy data from any linux box to either the pool_sas or pool_sata, it is painfully slow. When we copy data from any linux box directly to the syspool, it is plenty fast When we copy data locally on the Nexenta box from the syspool to either the pool_sas or pool_sata, it is crazy fast. We also see the same pattern whether we use iSCSI or NFS. We've also tested using different NICs (some at 1GbE, some at 10GbE) and even tried bypassing the switch by directly connecting the two boxes with a cable- and it didn't made any difference. We've also tried not using the SSD for the ZIL. So... We've ruled out iSCSI, the networking, the ZIL device, even the HBAs as it is fast when it is done locally. Where should we look next? Thank you all for your help! Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Here are some more findings... The Nexenta box has 3 pools: syspool: made of 2 mirrored (hardware RAID) local SAS disks pool_sas: made of 22 15K SAS disks in ZFS mirrors on 2 JBODs on 2 controllers pool_sata: made of 42 SATA disks in 6 RAIDZ2 vdevs on a single controller When we copy data from any linux box to either the pool_sas or pool_sata, it is painfully slow. When we copy data from any linux box directly to the syspool, it is plenty fast When we copy data locally on the Nexenta box from the syspool to either the pool_sas or pool_sata, it is crazy fast. We also see the same pattern whether we use iSCSI or NFS. We've also tested using different NICs (some at 1GbE, some at 10GbE) and even tried bypassing the switch by directly connecting the two boxes with a cable- and it didn't made any difference. We've also tried not using the SSD for the ZIL. So... We've ruled out iSCSI, the networking, the ZIL device, even the HBAs as it is fast when it is done locally. Where should we look next? Thank you all for your help! Ian Looking at the list suggested earlier: 1. Linux network stack 2. Linux iSCSI issues 3. Network cabling/switch between the devices 4. Nexenta CPU constraints (unlikely, I know, but let's be thorough) 5. Nexenta network stack 6. COMSTAR problems It looks like you have ruled out everything. The only thing that still stands out is that network operations (iSCSI and NFS) to external drives are slow, correct? Just for completeness, what happens if you scp a file to the three different pools? If the results are the same as NFS and iSCSI, then I think the network can be ruled out. I would be leaning toward thinking there is some mismatch between the network protocols and the external controllers/cables/arrays. Are the controllers the same hardware/firmware/driver for the internal vs. external drives? Keep digging. I think you are getting close. Cheers, Marty -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
The only thing that still stands out is that network operations (iSCSI and NFS) to external drives are slow, correct? Yes, that pretty much resume it. Just for completeness, what happens if you scp a file to the three different pools? If the results are the same as NFS and iSCSI, then I think the network can be ruled out. This is where it gets interesting... When we use the external disks as a local file system of the Nexenta box then it is fast. We can scp through the network some files from the linux box to the external drives without problem as long as we address the local file system (wherever the disks are). BUT, whenever iSCSI or NFS are involved it all goes sour. I would be leaning toward thinking there is some mismatch between the network protocols and the external controllers/cables/arrays. Sounds like it. The arrays are plenty fast on the same machine/controller/cables/arrays when we're not using a network protocol. Are the controllers the same hardware/firmware/driver for the internal vs. external drives? No. The internal drives (the syspool and 13 SSDs for the cache) are on a Dell H700 RAID controller. The external drives are on 3x LSI 9200-8e SAS HBAs connected to 7x Dell MD1000 and MD1200 JBODs. Thanks a lot! -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Would it be possible to install OpenSolaris to an USB disk and boot from it and try? That would take 1-2h and could maybe help you narrow things down further? I'm a little afraid to lose my data, i wouldnt be the end of the world, but I'd rather avoid that. I'll do it in last resort. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
More stuff... We ran the same tests on another Nexenta box with fairly similar hardware and had the exact same issues. The two boxes have the same models of HBAs, NICs and JBODs but different CPUs and motherboards. Our next test is to try with a different kind of HBA, we have a Dell H800 lying around. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
From the Linux side, it appears the drive in question is either sdb or dm-3, and both appear to be the same drive. Since switching to zfs, my Linux-disk-fu has become a bit rusty. Is one an alias for the other? Yes, dm-3 is the alias created by LVM while sdb is the physical (or raw) device The Linux disk appears to top out at around 50MB/s or so. That looks suspiciously like it is running on a gigabit connection with some problems. That's what I believe too. It's a 10GbE connection... From what I can see, you can narrow the search down to a few things: 1. Linux network stack 2. Linux iSCSI issues 3. Network cabling/switch between the devices 4. Nexenta CPU constraints (unlikely, I know, but let's be thorough) 5. Nexenta network stack 6. COMSTAR problems We'll run your tests and share the results. It is unlikely to be the CPUs on any side, they are the latests of Intel (Nexenta box) and AMD (Linux box) and are barely used. Thanks for helping! Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
I'll suggest trying something completely different, like, dd if=/dev/zero bs=1024k | pv | ssh othermachine 'cat /dev/null' ... Just to verify there isn't something horribly wrong with your hardware (network). In linux, run ifconfig ... You should see errors:0 Make sure each machine has an entry for the other in the hosts file. I haven't seen that cause a problem for iscsi, but certainly for ssh. we'll try that, thanks! Here's some numbers... This is a pastebin from iostat running on the linux box: http://pastebin.com/8mN8mchH This from the Nexenta box: http://pastebin.com/J1E4V1b3 A couple of notes: we know the Pool_sata is resilvering, but we're concerned about the performances of the other pool (Pool_sas). We also know that we're not using jumbo frames as for some reason it makes the linux box crash. Could that explain it all? Thanks for helping out! Ian ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
A couple of notes: we know the Pool_sata is resilvering, but we're concerned about the performances of the other pool (Pool_sas). We also know that we're not using jumbo frames as for some reason it makes the linux box crash. Could that explain it all? What sort of drives are these? It looks like iSCSI or FC device names, and not local drives Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
A couple of notes: we know the Pool_sata is resilvering, but we're concerned about the performances of the other pool (Pool_sas). We also know that we're not using jumbo frames as for some reason it makes the linux box crash. Could that explain it all? What sort of drives are these? It looks like iSCSI or FC device names, and not local drives The Pool_sas is made of 15K SAS drives on external JBOD arrays (Dell MD1000) connected on mirrored LSI 9200-8e SAS HBAs. The Pool_sata is made of SATA drives on other JBODs. The shorter device names are from the onboard Dell H700 RAID adapter (the SSDs and system pool are local) while the longer ones are from the LSI cards. Does that make sense? ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
What sort of drives are these? It looks like iSCSI or FC device names, and not local drives The Pool_sas is made of 15K SAS drives on external JBOD arrays (Dell MD1000) connected on mirrored LSI 9200-8e SAS HBAs. The Pool_sata is made of SATA drives on other JBODs. The shorter device names are from the onboard Dell H700 RAID adapter (the SSDs and system pool are local) while the longer ones are from the LSI cards. Does that make sense? somehow It does, somehow. Can you try to run some local benchmarking on those pools to see if they behave well locally? And please don't use HTML mail - it messes up formatting and leads to top-posting and worse :þ Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
If you have a single SSD for dedicated log, that will surely be a bottleneck for you. We're aware of that. The original plan was to use mirrored DDRDrive X1s but we're experiencing stability issues. Chris George is being very responsible and we'll help us out investigate that once we figure out our most pressing performance problems. Also, with so much cache ram, it wouldn't surprise me a lot to see really low disk usage just because it's already cached. But that doesn't explain the ridiculously slow performance... We do see the load of those drives get much higher when we have several servers (all linux boxes) connected to it at once. The problem really seem to be at the individual linux boxes level. Something to do with iSCSI/networking even tho the 10GbE network can certainly handle a lot more than that. I'll suggest trying something completely different, like, dd if=/dev/zero bs=1024k | pv | ssh othermachine 'cat /dev/null' ... Just to verify there isn't something horribly wrong with your hardware (network). In linux, run ifconfig ... You should see errors:0 We'll do that. Thanks! Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
\ We're aware of that. The original plan was to use mirrored DDRDrive X1s but we're experiencing stability issues. Chris George is being very responsible and we'll help us out investigate that once we figure out our most pressing performance problems. I feel I need to add to my comment that our experience with the X1s has been stellar. The thing is amazingly fast and I can't wait to put it back to production. We've been having issues making our system stable simply because it mixes many many devices that fight each other for resources- it is in no way the X1s fault and I sure don't want to give anybody that impression. Chris George and Richard Elling have been very responsive helping us with this and I'll be happy to share our success with the community once we figure it out. Ian -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
[zfs-discuss] Performance issues with iSCSI under Linux
Hi!We're trying to pinpoint our performance issues and we could use all the help to community can provide. We're running the latest version of Nexenta on a pretty powerful machine (4x Xeon 7550, 256GB RAM, 12x 100GB Samsung SSDs for the cache, 50GB Samsung SSD for the ZIL, 10GbE on a dedicated switch, 11x pairs of 15K HDDs for the pool). We're connecting a single Linux box to it using iSCSI and using top we see it spent all its time in iowait. Using zpool iostat on the Nexenta box I can see that the disks are barely working, typically reading 500K/sec and doing about 50 IOPS each- they obviously can do much better. We see the same pattern wether we're doing SQL queries (MySQL) or simply doing file copies. What's particularly curious is that with file copies, there is a long pause (can be a few seconds) between each file that is copied. Even reading a folder (ls) is slow. Where should we look at? What more information should I provide? Thanks a lot!Ian ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
Where should we look at? What more information should I provide? Start Start with 'iostat -xdn 1'. That'll provide info about the actual device I/O. Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss- boun...@opensolaris.org] On Behalf Of Ian D the help to community can provide. We're running the latest version of Nexenta on a pretty powerful machine (4x Xeon 7550, 256GB RAM, 12x 100GB Samsung SSDs for the cache, 50GB Samsung SSD for the ZIL, 10GbE on a dedicated switch, 11x pairs of 15K HDDs for the pool). We're If you have a single SSD for dedicated log, that will surely be a bottleneck for you. All sync writes (which are all writes in the case of iscsi) will hit the log device before the main pool. But you should still be able to read fast... Also, with so much cache ram, it wouldn't surprise me a lot to see really low disk usage just because it's already cached. But that doesn't explain the ridiculously slow performance... I'll suggest trying something completely different, like, dd if=/dev/zero bs=1024k | pv | ssh othermachine 'cat /dev/null' ... Just to verify there isn't something horribly wrong with your hardware (network). In linux, run ifconfig ... You should see errors:0 Make sure each machine has an entry for the other in the hosts file. I haven't seen that cause a problem for iscsi, but certainly for ssh. ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] Performance issues with iSCSI under Linux
To see if it is iscsi related or zfs, have you tried to test performance over nfs to a zfs filesystem instead of a zvol? SR -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
