that does not use cylinder 0 and the backup doesn't seem to
work.
TSM Server 5225 on AIX 5.2
Sun is 'new'
TSM Client 5.2.3.0
Any feedback, tips would be appriciated that I could provide to the SUN admin
Best Regards
Markus Veit
to install the schedule on
the inactive Node.
We can also reenter the password on the inactive nodes' registry to make sure
the sched won't fail when the cluster moves resources
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
ScaleOn GmbH Co. KG
SO-HS2-SBB
Hi,
DEFine SERver B PAssword
PAssword should be SERVERPAssword as well
funnily enough there is no error message when you only use password.
-DEFine--SERver--server_name--SERVERPAssword--=--password
Best Regards
Markus Veit
An: [EMAIL
Hi,
just an info,
we successfully restored VxFS on Solaris to UFS,
I didn't think that would work , it even worked with Oracle DB's
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie
Hi Bill,
on the client you can usually close the DOS box that pops up,
if that does not work, use killprocess or any other tool to kill the backup
(domdsmc).
Keep in mind if you do this when a transaction log backup is in progress you
have to restart the Domino Server
Best Regards
Markus Veit
Hi,
No it does not, might be implemented in a later version release
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema: Copy storage
Hi,
yes you can have both lto1 and lto2 tapes in a lib with lto2 drives,
the chip inside the tape identivies what kind of tape it is, so no need to go
through a diskpool.
Best Regards
Markus Veit
An: [EMAIL PROTECTED
test lab,
but thanks to Jan Fountain for sharing the info with me
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
ScaleOn GmbH Co. KG
SO-HS2-SBB
Leverkusen, B151 R.401
Tel.: +49 214 30 71254
Fax: +49 214 30 9671254
E-Mail: [EMAIL PROTECTED]
Internet
Hi,
can you do a q volhist and send the output about these volumes,
check if it says unknown anywhere
Best Regards
Markus Veit
mmc and not the tsm
mmc.
We succesfully tested the upgrade through a backup db devc=file than a restore
onto the new setup of w2k3.
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie
Hi,
yes it is, just make sure the path/devices match, i.e. /dev/rmt0 -- mt0.1.0.1
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema
Hi,
there is another thing, do not share w2k and aix uplinks from a SAN switch to a
SAN gateway,
because on one connection you can define only one HOSTTYPE, i.e. autosense/NT or
AIX.
Aix sometimes uses longer SCSI commands for HOSTTYPE autosense/NT
Best Regards
Markus Veit
Hi,
I'd try
Define PATH adsm-pac lto1dr4 srctype=server desttype=drive device=/dev/rmt4
library=ltolib1
Mit freundlichen Grüßen / Best Regards
Markus Veit
rep.
Mit freundlichen Grüßen / Best Regards
Markus Veit
in the shortest time possible so
we prefer the nt backup option because any box (different model) can be turned
into that app server. Restoring the databases, etc will take long enough.
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
we are in the middle of testing, will let you know how it goes
Mit freundlichen Grüßen / Best Regards
Markus Veit
Grüßen / Best Regards
Markus Veit
/ Best Regards
Markus Veit
.
Backups were exclusivly images
Mit freundlichen Grüßen / Best Regards
Markus Veit
at LTO1 drive max write speed. (specs 30MB/s compressed)
Any confirmation of this would be appreciated.
TSM Server 5.2.1.1, STA 5.2.1.1, TSM client 5.2.0.3
W2k environment
Mit freundlichen Grüßen / Best Regards
Markus Veit
freundlichen Grüßen / Best Regards
Markus Veit
update libv libname volname status=scr
do this on the library manager. I just did it on a 5.1.x server and had no
problems.
-Original Message-
From: Markus Veit [mailto:[EMAIL PROTECTED]
Sent: Monday, October 06, 2003 7:59 AM
To: [EMAIL
ML3 and AIX 4.3.3 ML9
TSM Client 5.1.5.6 restore with resourceutilization more than 2 and
maxnummp=resourceutil + 1 CORE DUMPS the server every time!!!
Call has been opened with TSM support
Mit freundlichen Grüßen / Best Regards
Markus Veit
with TSM support, this might affect storage agents
as well :-((
will test it soon
Mit freundlichen Grüßen / Best Regards
Markus Veit
Volume Name: 10L1
Volume Location: LIB_CLIENT
Command:
What could I do to return that volume back to scratch?
TIA
Markus Veit
Hi,
Version 5.1.7.1, 12 GB is still valid, does that change with 5.2? If it does,
maybe I should read the manual :-))
Mit freundlichen Grüßen / Best Regards
Markus Veit
volume
del logvol 'old_volume'
define extra log volumes on the new drive and extend it.
You could also do it in smaller chunks, but the rule is:
max reduction of the whole logsize can not be smaller than the logvolume to be
deleted
Mit freundlichen Grüßen / Best Regards
Markus Veit
driver is always in a stopped state,
and when I try to start it I get the following error:
Unable to start the TSM Device Driver:
Reason: The specified service does not exist as an installed service
Has anyone seen this too?
TIA
Mit freundlichen Grüßen / Best Regards
Markus Veit
Thanks Hunny,
as usual you should read the manual first, but who does ? :-))
It works now though.
Mit freundlichen Grüßen / Best Regards
Markus Veit
sched's that would garantee that the resources are
split.
Mit freundlichen Grüßen / Best Regards
Markus Veit
.
Note the Notes server does, and should not be running on the restore server
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
try
exclude.dir *:\documents*
Mit freundlichen Grüßen / Best Regards
Markus Veit
5.1 ML3 64bit
Mit freundlichen Grüßen / Best Regards
TIA
Markus Veit
freundlichen Grüßen / Best Regards
Markus Veit
Hi,
what would be the best dsm.opt settings for Novell restores?
What is the transfer rate i.e. GB/h that could be expected on Novell 5.X and 6.x
TSM environment server 5.1.x.x AIX, W2k
Baclient 5.xx
TIA
Mit freundlichen Grüßen / Best Regards
Markus Veit
.
Best Regards
Markus Veit
occurred). Refer to Appendix D in the 'Messages' manual
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
I was wondering which server hardware do you use.
We had a sort of similar problem with LTO tapes ( Fuji) on Compaq HW, after
disabling the SCSI monitoring agents
the problem disapeared
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
attached libs and tapes, FC attached storage is not affected.
Have opened a call with Compaq and they are on it.
Try disabling the agents and see if you still get any errors.
Feedback would be appriciated
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
yes that is possible, register the admin and than 'grant authority admin
class=node authority=access'
I'm not sure about 4.1 though, but 4.2 and higher it works
Mit freundlichen Grüßen / Best Regards
Markus Veit
path AIX5.1 ltodrive1
srctype=server desttype=drive library=adic100 device=/dev/rmt5 online=YES
Thats all, works well for us.
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
you have to start SQL in single user mode, with the startup parameter -e, Note:
-e is small and the TDP Documentation says -E I think, when you use -E the sql
server won't start.
Markus Veit
database state
when you restore the SQL system with the BAclient. It has always worked for me.
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi Del,
thanks you are absolutly right, sorry -m it is. :-)
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi Jason,
I may be wrong, but have you set up the path to the drives for the client on the
LIBRAY MANAGER, if not do so
Markus
An: [EMAIL PROTECTED]
Kopie:
checkin out.
SELECT l.volume_name, L.LIBRARY_NAME, L.STATUS, L.LAST_USE FROM LIBVOLUMES AS
L WHERE L.STATUS'Scratch' and not exists (select volumes.volume_name from
volumes where volumes.volume_name = l.volume_name)
Mit freundlichen Grüßen / Best Regards
Markus Veit
else
exit
fi
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi Thabani
what TSM server level are we talking about?
What is the output of q libv x volume_name f=d and q vol volume_name
does the actlog say something like volume x is now set to status private
to prevent reaccess?
Mit freundlichen Grüßen / Best Regards
Markus Veit
Does the actlog say somthing like unable to read label of volume status
is now changed to private to prevent reaccess
I also have to agree with Richard, you should supply more relevant info ;-)
Mit freundlichen Grüßen / Best Regards
Markus Veit
new HW in a matter of 2 years.
Just a thought
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema: Re: NT restore to different
hardware
.
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema: tsm device driver does not
start on boot !
[EMAIL PROTECTED
real figuers, which are actually observed in real life, no
theoretical numbers.
Thanks for your time.
Best Regards
Markus Veit
Hi all,
where would I find the download for TSM 4.2.3.0 server so I can Update to
4.2.3.2. from 4.2.1.9. The fileset requires base level 4.2.3.0.
OS AIX 4.3.3 ML10
It's not here
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/patches/server/AIX/
Best Regards and thanks
Markus
Hi Leif,
thanks, I'll remember it for next time.
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema: Re: TSM Server Version 4.2.3.0
Hi,
50 or when the chip inside the cartridge says it is too old.
Best Regards
Markus Veit
An: [EMAIL PROTECTED]
Kopie:
Thema: LTO Cleaning
delete
volume xxx because it still contains data
do a move data on the volume, if that fails restore the volume from copypool, if
thats not available
delete vol volume_name discard=yes and hope none of the data on it was deleted
from the original source :-(
Best Regards
Markus Veit
. Migration sets in, even migrating the TL's to its own tape,
meaning the TL's are not on disk anymore and the whole proccess is still fairly
slow.
Any suggestions are appreciated.
TIA
Markus Veit
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi Dwight,
the reusedelay is 0.
FYI
if there are in a not to reuse state than the volumes have a State of 'Pending'
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
that's true, but they are seen with the q drmedia command, and are included in
the volhist,
there is no mentioning of the tapes in the actlog with retention of 10 days
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
thats the thing, there are no records in the volume history, but still Private
with Data
Seems like a bug to me, or a feature for tape manufactures :-)
Mit freundlichen Grüßen / Best Regards
Markus Veit
for the tape volser and you
should see the message.
HTH
Robin Sharpe
Markus Veit
markus.veit@BAY
ERBBS.COM To:[EMAIL PROTECTED]
Sent by: ADSM: cc:
Dist StorSubject
Hi Bill,
indeed they are checked in as scratch, so there seems to be a bug somewhere for
the volumes not to automattically return to scratch
Mit freundlichen Grüßen / Best Regards
Markus Veit
Ich werde ab 02.12.2002 nicht im Büro sein. Ich kehre zurück am 11.12.2002.
Ich werde Ihre Nachricht nach meiner Rückkehr beantworten. Bitte wenden Sie sich
in dringenden Fällen an Dr. Rolf Neuber da ich im Moment Urlaub habe.
Ich werde ab 02.12.2002 nicht im Büro sein. Ich kehre zurück am 11.12.2002.
Ich werde Ihre Nachricht nach meiner Rückkehr beantworten. Bitte wenden Sie sich
in dringenden Fällen an Dr. Rolf Neuber da ich im Moment Urlaub habe.
(SUN
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi,
the queryschedperiod is set to 5 hours
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hello,
I have a point to point FC connection with a SAN GW (LTO) and a Modular Data
Router (3570) using 2 different Emulex HBA's.
All devices show up as mt124.x.x.x and lb124.x.x.x, my question, is that normal?
W2k SP2, TSM Server 5.1.5.2
Best Regards
Markus Veit
4.2.1.9
on w2k
Any suggestions would be appreciated
Mit freundlichen Grüßen / Best Regards
Markus Veit
Hi David,
thanks for the info, it works.
I also made a mistake with the option, it is not incexcl, but incLexcl ;-).
Maybe I schould use the webclient.
Mit freundlichen Grüßen / Best Regards
Markus Veit
%
Mit freundlichen Grüßen / Best Regards
Markus Veit
Regards
Markus Veit
Hi,
to get a better overview try this one
select library_name, status, count(*) as NO_OF_Tapes from adsm.libvolumes group
by library_name, status
Mit freundlichen Grüßen / Best Regards
Markus Veit
be appreciated.
Mit freundlichen Grüßen / Best Regards
Markus Veit
with the 4.2.1.32 version. (
just as bad)
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
Bayer AG
IM-CTS-PSO-SBB
Leverkusen, W 5
Tel.: +49(0)214/30-71254
Fax: +49(0)214/30-9671254
E-Mail: [EMAIL PROTECTED]
Internet : http://www.bayer-ag.de
on the destination server.
We also have several other TSM servers that do a db backup to virtuel volumes
where everything is ok.
Have you / anyone seen anything like that, a call with Tivoli didn't help.
Best Regards
Markus Veit
An: [EMAIL
storagepool at a different site.
I was thinking of something like library sharing. Anyone got any exoirience with
library sharing?
Thanks
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
Bayer AG
IM-CTS-PSO-SBB
E-Mail: [EMAIL PROTECTED]
Internet : http
Markus Veit
_
Bayer AG
Hi,
is that a Compaq ( Cambex) HBA or an IBM HBA? There are problems with the driver
for AIX with a Compaq HBA we found.
Although stated, the driver didn't support fabric connections, only AL and PtP.
Our environment was AIX 4.3.3 Compaq HBA and Compaq SAN, trying to do LAN free
backup, which
Hi all,
has anyone got any experience using direct i/o for diskpools on AIX. Is there a
big performance increase overall or is it the
same as large file size enabled jfs.
Mit freundlichen Grüßen / Best Regards
Markus Veit
put volhist.out
put dsmserv.opt
put dsmserv.dsk
bye
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
Bayer AG
Hi,
we do it this way. Have a at.exe or scheduled task running that executes the
nt_ftpsend.cmd. That`s all
(See attached file: NT_ftpsend.cmd)(See attached file: NT_ftp.script)
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
Bayer AG
, renaming the node
and beginnig a new backup cycle. An audit db fix=yes detail=yes found a lot of
errors, but didn't resolve our problem.
Environment was NT4.0, Domino 5.08.
Mit freundlichen Grüßen / Best Regards
Markus Veit
_
Bayer AG
IM-CTS-PSO-SBB
Hello,
has anyone tried to backup an AIX oracle server using image and snapshot backup?
We want to backup an Oracle server without using RMON.
Can anyone think of a way to backup Oracle without setting up RMON?
Thanks
Mit freundlichen Grüßen / Best Regards
Markus Veit
84 matches
Mail list logo