I am out of the office until 08/22/2008.
Please contact my backup Himanshu Madhani at [EMAIL PROTECTED], or my
manager Jim Riehl at [EMAIL PROTECTED]
Note: This is an automated response to your message ADSM-L Digest - 15
Aug 2008 to 18 Aug 2008 (#2008-206). sent on 8/18/08 22:00:44.
This is
I will be out of the office starting 05/08/2008 and will not return until
05/21/2008.
Please contact my backup Himanshu Madhani at [EMAIL PROTECTED], or my
manager Jim Riehl at [EMAIL PROTECTED]
I will be out of the office starting 02/26/2008 and will not return until
02/29/2008.
I will be out of the office starting 04/23/2007 and will not return until
06/04/2007.
During my absense, please contact
o Himanshu Madhani at [EMAIL PROTECTED] on device related issues or device
certification requests
o Ken Law at [EMAIL PROTECTED] on device certification status
o or my
Martin,
You can use either one -- format=drive or format=ultrium2c. However, if you
do not want the drive to write with compression, you will need to set
format=ultrium2.
Regards,
Hunny..
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on 01/13/2005
12:33:48 PM:
Hi all,
can a format type
sure the devices
are properly configured by checking the device names. Management Console -
Tivoli Storage Manager - localhost - TSM device driver - Reports -
Device Information. Under Device Name, you should see lbx.x.x.x for the
autoloader and tapex for the drive.
Regards,
Hunny Kershaw
Check
Hello Fernando,
On the Windows platform, the block size used by the TSM server version
5.1.8 for regular back up on LTO is 32K. It's 256K on the UNIX platforms.
You can not change the block size used by the TSM server.
Regards,
Hunny Kershaw
Hello Neil,
Currently, the TSM device driver does not support Storport drivers. So if
your tape drives or library are controlled by the TSM device driver, you
will need to use the SCSI port drivers.
Regards,
Hunny Kershaw
== DD_ILLEGAL_REQUEST
command close result rc != -1
Regards,
Hunny Kershaw
Paul Zarnowski
[EMAIL PROTECTED
It will be documented in the device readme (README.DEV).
Regards,
Hunny Kershaw
Neil Schofield
[EMAIL PROTECTED
Steve,
The TSM device driver does not support drives with device ID STT2A.
You will need the Windows native driver for this device.
Regards,
Hunny Kershaw
Steve Ochani
Steve,
In the TSM MC, under device information, were you able to see tape0 in
the Device Name colume? Just wanna make sure that the device is
controlled by the native driver.
Hunny Kershaw
Steve
.
Regards,
Hunny Kershaw
Fernando Figueiredo
(EDS)To: [EMAIL PROTECTED]
[EMAIL PROTECTED]cc:
NERGIA.COM Subject: Using LTO2 as LTO1
Hello Sascha,
ADIC Scalar 2 is not supported in the 4.2 release.
Regards,
Hunny Kershaw
Sascha Braeuning
Did you run audit library?
HK..
Fernando Figueiredo
(EDS)To: [EMAIL PROTECTED]
[EMAIL PROTECTED]cc:
NERGIA.COM Subject: Upgrade to STK L180
Unfortunately, the label wizard currently doesn't work with SDLT drives.
This should be fixed in the next PTF 5.1.8 and 5.2.1.
You can use the LABEL LIBVOL command instead to label volumes with or
without barcodes. Try
LABEl LIBVol lib_name drive_name SEARCH=Yes LABELSource=Barcode
Nicolas,
I just realized you have HP LTO drives not SDLT. However, they both have
the same problem with the labeling wizard.
Hunny..
- Forwarded by Hunny Kershaw/San Jose/IBM on 08/28/2003 12:34 PM
file should be tsmscsi.sys.
Regards,
Hunny Kershaw
Markus Veit
[EMAIL PROTECTED]To: [EMAIL PROTECTED
Hello Alex,
Did you label volume ITG001 yet? If it has not been labeled, you should not
use the checkin libvol command. Try the label libvol instead..
label libvol LB6.0.0.3 search=yes labelsource=barcode checkin=scratch
The server will then find the volumes that have not been checked into the
This link shows the formula for the drive addresses when the Queued Unloads
option is set to OFF.
http://www-1.ibm.com/support/entdocview.wss?rs=663uid=swg21066478
You can also use lbtest to find out the address of the drives - lbtest -d
libname. Select 6 to open and 8 for
Hi Joni,
Yes, you need the TSM server at least version 5.1.6.1. You also need the
IBM device driver for the drives and the library. I don't know the driver
level.. The one on the FTP site should do it.
Regards,
Hunny..
Joni Moyer
[EMAIL
Can you see the library in the TSM management console under TSM device
driver and Device Information? If you can, what is the device name?
TSM Mail-ID
tsmmail2000@YAHOTo: [EMAIL PROTECTED]
O.CA
Jack,
Sense data 03-14-00 means recorded entity not found. Since 03 is media
error, this could be a cartridge problem.
Regards,
HK..
Coats, Jack
Jack.Coats@BANKSTTo: [EMAIL PROTECTED]
ERLING.COM
Wolfgang,
Find a TSM device driver utility called lbtest.exe. Then run lbtest -d
lb0.1.1.3 and choose manual test. Run option 6 to open, 8 to get element
count and 9 to get inventory. Are these options successful? If fails,
what's the error message?
H.Kershaw
Wolfgang
inventory
From this point on, you should be able to manipulate the library.. like
move medium. Make sure that the device is always closed or exit lbtest
before starting the TSM server if the library is already defined to the
server.
Regards,
Hunny Kershaw
Internet Address: [EMAIL PROTECTED]
Tivoli
the
message The system cannot find the device specified.. You saw the device
name \\.\tape0, that is a good indication that the drive has been claimed
by the NT driver.
Regards
Hunny Kershaw
Internet Address: [EMAIL PROTECTED]
Tivoli Storage Manager - Device Driver Development
Tel (408) 256-2828, T/L 276
I assume this is on Solaris.. To use the TSM device driver, you will have
to configure the library in lb.conf. The library device name would then be
/dev/rmt/xlb.
Hunny Kershaw
Internet Address: [EMAIL PROTECTED]
Tivoli Storage Manager - Device Driver Development
Tel (408) 256-2828, T/L 276-2828
IBM 3590H was GA'd 07/02. The TSM device driver (adsmscsi.sys) can be used
on Windows. IBM device driver is required on other platforms.
Regards,
Hunny Kershaw
Internet Address: [EMAIL PROTECTED]
Tivoli Storage Manager - Device Driver Development
Tel (408) 256-2828, T/L 276-2828
Quality Policy
the
drive with element address 256? The address numbering goes from the bottom
up.
Hunny Kershaw
Internet Address: [EMAIL PROTECTED]
Tivoli Storage Manager - Device Driver Development
Tel (408) 256-2828, T/L 276-2828
Quality Policy = Commit to Quality, Customer Satisfaction, Continual
Improvement
? The element addresses for the drives depend on which
driver controls the library.
Hunny Kershaw
Internet Address: [EMAIL PROTECTED]
Tivoli Storage Manager - Device Driver Development
Tel (408) 256-2828, T/L 276-2828
Quality Policy = Commit to Quality, Customer Satisfaction, Continual
Improvement
be recognized
by the TSM device driver.
Please contact Irfan Habib ([EMAIL PROTECTED]) for device support request.
Regards,
Hunny Kershaw
Justin Derrick
jderrick@CANADA.To: [EMAIL PROTECTED]
COM cc
Information on element addresses for STK L700 is available @
http://www.tivoli.com/support/storage_mgr/devices/atab94.htm
Jason Morgan
attached, the library device name would be lbx.1.y.z and the drive device
name would be mtx.0.y.z where x is the SCSI of the autoloader.
Hunny Kershaw..
Oliver Martin
Oliver.Martin@HYTo: [EMAIL PROTECTED]
POVBG.AT
Hi,
The mx series are not supported in 4.2.1 or 3.7. I
believe the drives in these libraries are 9.1GB
optical drives which also are not supported in 4.2.1
and 3.7.
H.Kershaw..
--- Diego Fdo. Rivera [EMAIL PROTECTED]
wrote:
Hello!
Anyone using HP SureStore 1200mx or HPSureStore
200mx with
One step furthur.. At least now you can see
lb3.0.0.5.
Were you able to open the library through lbtest
option 6 and get element count option 8? If this fails
with cc=321, it's definitely a problem between
firmware and the device driver.
--- Bruce Mitchell [EMAIL PROTECTED] wrote:
BTW thanks
)
I'll try calling qualstar tomorrow.
On Wednesday, October 17, 2001 2:09 PM, Hunny
Kershaw
[SMTP:[EMAIL PROTECTED]] wrote:
I am not familiar with the options on this
library. If
you can't find other options to disable the serial
numbers, you may want to contact the vendor and
find
out how
You will need the TSM device driver (adsmscsi.sys) to
support this library on NT4. But looks like the driver
is already loaded since you can see mt..
You can check in the registry to see if the library is
recognized by the system.
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\Scsi\Scsi Port
4\Bus..
The worksheet for Qualstar 412xxx is at
http://www.tivoli.com/support/storage_mgr/devices/atab105.htm
--- Steven Bridge [EMAIL PROTECTED] wrote:
Could anyone tell me where I can find the device
configuration worksheet
with the drive element numbers for the Qualstar
412300 library ?
You
TSM 4.1 also has support for IBM LTO libraries
(3581,3583 and 3584). The next PTF should include the
support for a few LTO libraries, i.e. Plasmon FTA,
Exabyte 110L, ...
--- Shawn Raymond [EMAIL PROTECTED] wrote:
TSM 4.1 has support for IBM LTO drives at least on
AIX and NT with the
latest
39 matches
Mail list logo
