Remco,
Can we see/have your script? We came up with a similar solution and would
like to compare notes. By san discovery, do you mean the TSM server
option?
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu -
Our 3494 ATL has 15-drives, 5-TS1120 and 10-TS1130.
We have just purchased replacements/upgrades to replace the TS1120 with
TS1130 drives plus add 2-new drives. We currently have 2-TS1120 drives
that are starting to act up and thus need to be yanked. 2-of my new
TS1130 drives have appeared.
A recent SAN system upgrade sort-of killed 19TB of storage volumes, making
them read only.
Since we are having pathing issues, plus we need to perform fsck on these
volumes due to the journal being screwed-up, I wanted to disable use of
these disk volumes without killing the server, if possible.
not attempt to mount the volume.
If the volume being updated is an empty scratch volume that had an
access mode of offsite, the server deletes the volume from the
database.
Cheers,
Rick
On Mon, Jun 4, 2012 at 4:42 PM, Zoltan Forray/AC/VCU
zfor...@vcu.eduwrote:
A recent SAN
All of my 6.x servers are a mix of the levels you mentioned, all in
production. 6.1.5.100 (RHEL5), 6.2.3.100 (RHEL6), 6.2.4 (just upgraded
from 6.2.3.100-RHEL5), 6.2.3.000 (RHEL6) and just put up my first
6.3.1.000 on RHEL6 (saw too many discussions about 6.3.0 so jumped to the
latest before
I didn't see/do anything special. Just did the normal backupDB, volhist,
devconfig - shut down - ran ./install.bin -i console (I don't use the GUI
stuff much, if I can avoid it)
The readme for the 6.2.4.1 level points to a generic installing a
Tivoli Storage Manager server fix pack page at:
From my SQL guy:
Sure, we do it all the time. 32bit and 64bit and the version of SQL don't
matter as long as you're going up a version (you can't restore to a lower
version of SQL). Same goes for TDP actually, as long as you're restoring
to a higher version it should be fine. And if they don't
Recently, for migration/testing purposes, I did a full conversion of a
5.5 server to 6.2 on my test TSM server.
I would like to continue using this server to test additional upgrades
without having to wipe and rebuild.
Unfortunately, since it is a copy of a real server, whenever I fire it up,
on 2012-05-08
16:00:40:
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@vm.marist.edu,
Date: 2012-05-08 16:03
Subject: Re: Pct Migr=0.0, Caching=No but there is data in the disk
stgpool
Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu
This is becoming a constant, daily problem
/phishing.html
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@VM.MARIST.EDU
Date: 05/03/2012 04:23 PM
Subject:Re: [ADSM-L] Pct Migr=0.0, Caching=No but there is data in
the disk stgpool
Sent by:ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
MIG STG BACKUPPOOL LO=0
Yes
Well, it did it again.
Over the weekend, things got all hung up due to nodes not being able to
backup to the disk LZ (all the tape drives were busy). Q STG showed 22%
migratable but 100% utilized so the hi/lo values never kicked in for
auto-migration.
What the heck is going on. None of my
: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@VM.MARIST.EDU
Date: 05/07/2012 08:42 AM
Subject:Re: [ADSM-L] Upgrading to 6.3: can I restore my 6.2.3 DB
after installation
Sent by:ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Well, it did it again.
Over the weekend, things got
I have a very odd situation on my new Linux 6.2.3.100 server/disk pool, as
described in the subject.
Here is the Q STGPOOL
1:30:21 PM FIREBALL : q stg backuppool f=d
Storage Pool Name: BACKUPPOOL
Storage Pool Type: Primary
Device
I thought about that too (should have mentioned it). We just recently
rebooted the server (network issue - don't ask...) and there are no
active backups/sessions. No processes other than the movedata I just
started. I did a Q CONTENT and all of the disk volumes show something in
them from
MIG STG BACKUPPOOL LO=0
Yes the stgpool has thresholds set (see my original post/below).
WHOA - Something just changed. I have been running various move data
to empty the individual volumes. I just did a q stgpool and now it
shows Pct Migr - 100%.
Really bizzare...
Zoltan Forray
TSM
First define the server-to-server connection. Be sure to define it as a
node for the virtual-volumesfor the server you want to backup (source).
Source Server
DEFINE SERVER HADES serverpa=*** hla=IP-address-or-DNS lla=1500 pa=***
del=0 noden=HADES
Then do the same in reverse from the target
V5.5 (and probably older - I don't have anything older) and higher have
always been able to do this.. I have 5-onsite servers that daily do a
SNAPSHOT backup of the database (plus other things like devconfig, volhist
but that is another story) to an offsite TSM server that does nothing but
hold
No, I will not be running both at the same time. I will perform the full
DB back as the last task (along with backup devconfig, volhist, etc) and
disconnect old server from the network.
I wonder if I change the IP and hostname on the new server to the same as
the old BEFORE restoring the DB,
Best Regards
Chavdar
On Mon, Apr 23, 2012 at 6:31 PM, Zoltan Forray/AC/VCU zfor...@vcu.edu
wrote:
I am having difficulty reconciling which order to do what based on
documentation that says not to do it the way I have/need to do it. I am
getting ready
I am having difficulty reconciling which order to do what based on
documentation that says not to do it the way I have/need to do it. I am
getting ready to do a complete migration from an old 5.5 server (Linux) to
a brand new box (both hardware and OS).
I need to restore the 5.5 DB, volhist,
so I cannot help with the
message.
Hope that helps...
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Monday, April 23, 2012 10:32 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] V5.5 - V6.2.3 Move - Chicken
Going through testing of converting/upgrading a server and have a few
questions as well as seeing some oddities. Doing this on a test server
since we will be moving everything to a new machine for the actual move.
This is what I did (following the instruction in the book):
1. Installed server
IBM seems to be distancing itself from Solaris in general. We run Domino
on Solaris Sparc (just starting to move to Google for Education - yea!)
and with 6.3 they did not update the TDP and said 5.5 was the end of the
line for the Solaris TDP. 6.3 for Domino only supports Linux, AIX and
Windows.
Stor Manager ADSM-L@vm.marist.edu wrote on 2012-04-17
16:22:13:
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@vm.marist.edu,
Date: 2012-04-17 16:24
Subject: Re: Why are my temp files being backed up?
Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu
Andy,
Thanks for the reply
-L@vm.marist.edu wrote on 2012-04-17
16:22:13:
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@vm.marist.edu,
Date: 2012-04-17 16:24
Subject: Re: Why are my temp files being backed up?
Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu
Andy,
Thanks for the reply.
No includes
Windows 2003 server - 6.3 client. This machine is very memory
constrained. 43M files. Using journaling and MEMORYEFFICIENT
DISKCACHEMETHOD.
When I use the CLI and do a q inclexcl, I see:
snippage
Exclude All *\temp\* Server
more snippage
Exclude All
: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Tuesday, April 17, 2012 2:00 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Why are my temp files being backed up?
Windows 2003 server - 6.3 client. This machine is very memory
constrained. 43M files. Using
the case, then check the log again tomorrow.
- Margaret
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Tuesday, April 17, 2012 11:00 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Why are my temp files being backed up
Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager
ADSM: Dist Stor Manager ADSM-L@vm.marist.edu wrote on 2012-04-17
14:43:11:
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@vm.marist.edu,
Date: 2012-04-17 14:46
Gary,
Reply to me off-list. We use Banner/Blackboard and backup everything with
TSM/TDP for Oracle. I can connect you to one of the folks who handle all
things Oracle backups.
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
Linux Server - 6.1.5.100
Is there a default value for manual Migration, that I am not aware of? I
never use the DUR value. Yesterday around 14:40, I started a manual
migration (mig stg backuppool lo=0). This morning at 7:26am I see the
message:
ANR4925W Migration process 1727 terminated for
@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Wednesday, April 11, 2012 9:44 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Migration duration default?
Linux Server - 6.1.5.100
Is there a default value for manual Migration, that I am not aware of? I
never use the DUR value. Yesterday around 14
from.
Query the script using: q script script-name f=l
And check the lines regarding migration
~Rick Adamson
Jacksonville, FL.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Wednesday, April 11, 2012 11:51 AM
I have a curious situation with one or two clients issuing the following
message:
4/9/2012 10:52:32 PM ANR2568E Request for node SASBICOMP.VCU.EDU to start
schedule BANNER at 04/10/2012 10:00:00 PM is denied. Current time is
04/09/2012 10:52:31 PM.
Trying to figure out what is going on.
The
, Zoltan Forray/AC/VCU
zfor...@vcu.eduwrote:
I have a curious situation with one or two clients issuing the following
message:
4/9/2012 10:52:32 PM ANR2568E Request for node SASBICOMP.VCU.EDU to
start
schedule BANNER at 04/10/2012 10:00:00 PM is denied. Current time is
04/09/2012 10:52:31 PM
We are in a major project to completely reorganize/replace our SAN
switches used by tape drives for all TSM servers.
We are hoping to transition to the new switches, gradually, vs all at
once. This depends on how the tape drives use the dual-ports/fibre
connections.
Currently, we only use 1 of
| (716)645-3564)
On Tue, 3 Apr 2012, Zoltan Forray/AC/VCU wrote:
We are in a major project to completely reorganize/replace our SAN
switches used by tape drives for all TSM servers.
We are hoping to transition to the new switches, gradually, vs all at
once. This depends on how the tape drives use
Doing some reorganization, we recently moved (server-to-server export)
some nodes from a 6.1.5.10 server to a 6.2.3.0 server. Now, the occupancy
numbers on the 6.2 (71mb) server are lower than the 6.1.5 (83mb) server,
eventhough the file/object counts are identical (static file system)?
All of
Draper Lab
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Wednesday, March 07, 2012 8:26 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Occupancy discrepency between 6.1.5.10 and 6.2.3.0 server
Doing some reorganization, we
password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@VM.MARIST.EDU
Date: 03/07/2012 01:24 PM
Subject:Re: [ADSM-L] Occupancy discrepancy between
WOW - such harsh words about 6.1 ! I don't agree..my main production
6.x system is 6.1.5.10 with no issues. At least it hasn't had this wacky,
problem my other 6.2.x servers have had with a DB backup randomly,
intermittently failing with no discernible reason(note, there are docs
that
me, I am not interested in reorging the tables. In any
case
6.3 doesn't solve all the reorg issues, see apar ic81261 and flash
1580639.
Thanks,
Bill Colwell
Draper Lab
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Zoltan Forray/AC
I am trying to experiment with doing a V5 to V6 conversion by first
restoring the V5 server to a test server.
We have very little experience doing DB restores and none involving an
offsite TSM server. My first attempts failed. I think I know how to fix
it but the docs on how to perform a DB
server-server comm will be down again because
out-of-sync issues.
Regards,
Karel
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens Zoltan
Forray/AC/VCU
Verzonden: dinsdag 21 februari 2012 15:45
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: [ADSM-L] Server
All of the Linux clients, to date, are labeled x86 as part of the name.
No x64 client versions as far as I can tell
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim
4GB of memory for a DB2 based server install? The specs call for a
minimum of 8GB and usually 16GB is preferred/suggested. I have one Linux
server running V6.2.3 with 8GB and it is an offsite DR type server that
houses nothing but DBSnapshot backups. No production machine is less than
16GB and
One of my servers is having disk issues and it happens to be where the
tsmarchlog folder is. The Linux Administrators Guide says to:
Moving only the archive log
You can move only the archive log from one directory to another.
1. Halt the server.
2. Create an new archive log directory. For
Folks,
I am randomly seeing these message on all of my 6.x (6.1.5.10 and
6.2.3.100) servers and have no clue why.
1/30/2012 12:00:18 PM ANR4588E A database backup configuration might be
incorrect
1/30/2012 12:00:18 PM ANR1893E Process 1304 for Database Backup completed
with a completion state of
Anyone know of an ILMT listserver/forum I can get some help from?
I had a working 7.2.2 ILMT server but due to problems with some clients
and the agents, I decided to upgrade to 7.5 (the 7.5 agents require 7.5
server).
After doing an upgrade, I could not signin to the admin center. Did a
Eventhough they don't show any content, you could always do a delete
volume ... discarddata=yes for each volume.
From: Vandeventer, Harold [BS] harold.vandeven...@da.ks.gov
To: ADSM-L@VM.MARIST.EDU
Date: 01/20/2012 02:17 PM
Subject:[ADSM-L] Deleting STG POOL
Sent by:
I am going through the docs preparing to do my first test of converting a
V5 server to V6.3 on a test server/machine.
I am looking for details on EXACTLY what the DSMUPGRD PREPAREDB does.
Since this is a test/dry run, I don't want to do this against a live
server, just a copy of it's databases.
Anyone have experience with installing and configuring Tivoli Storage
Manager for Virtual Environments Version 6.3. We are taking a serious
look at this TDP but haven't found any cookbooks and the IUG is very
thin on specifics/details.
Zoltan Forray
TSM Software Hardware Administrator
Virginia
Ken,
My VMWare guy has the most questions. Can I forward your direct email
address to him?
I too will have questions from the TSM/server side since I have never
setup anything like this. Seems like LAN-FREE is the way to configure but
I have never done anything like that, either.
Zoltan Forray
Some questions that we could not easily glean answer from the docs:
1. What are the specs/requirements for the vStorage/Backup Server that
we will have to build?
2. What network requirements are there? Our TSM backup servers are on a
completely different subnet then the VMWare servers.
That is as ridiculous as telling people to keep IE6 around since their
applications don't work on anything newerbut at least
you CAN have multiple version of FF...
From: Vandeventer, Harold [BS] harold.vandeven...@da.ks.gov
To: ADSM-L@VM.MARIST.EDU
Date:
Have you tried ILMT? Does not work with anything but IE! FireFox is
totally unusable and Chrome, while better than FF, is still
problematic/distorted!
Come on IBM.get with the times.
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office of
Have you tried killing with extreme prejudice as in kill -9 4938?
From: Tim Brown tbr...@cenhud.com
To: ADSM-L@VM.MARIST.EDU
Date: 11/10/2011 01:47 PM
Subject:[ADSM-L] tsm services hung on red had linux
Sent by:ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Server is
OPT and SYS have different purposes/uses on Linux vs Windows. DSM.SYS on
Linux does what DSM.OPT does on Windows. DSM.OPT is used for very few
parms - one is to select the appropriate stanza in a DSM.SYS file.
For example, here are lines in a DSM.SYS - note the servername
SErvername
We had the same problem with a Windows box when the client was upgraded
from 6.1 to 6.2. The help file from the previous version was left behind
and caused errors. Replaced it with the same version installed by the
newer client (but into a different sub-directory)
Zoltan Forray
TSM Software
as on the windows platform so no need to
write zeros on all blocks on unix anymore.
Hans Chr.
On Wed, Nov 2, 2011 at 1:49 PM, Zoltan Forray/AC/VCU zfor...@vcu.edu
wrote:
I had an odd situation occur involving formatting disk storage volumes
on
a Linux server.
In the past, when creating and formatting storage
I have installed this on a couple of W2K8R2 servers with no issues. IIRC,
during the install process it does make you update a C++ re-distributable
library.
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu -
I had an odd situation occur involving formatting disk storage volumes on
a Linux server.
In the past, when creating and formatting storage pool volumes, a 300GB
volume would normally take an hour or more. I could watch the space being
allocated, piece-by-piece until it reached 300GB and then
a week otherwise.
I guess it does the same as on the windows platform so no need to
write zeros on all blocks on unix anymore.
Hans Chr.
On Wed, Nov 2, 2011 at 1:49 PM, Zoltan Forray/AC/VCU zfor...@vcu.edu
wrote:
I had an odd situation occur involving formatting disk storage volumes
on
a Linux
for me when I had to format 40
TB of disk/file on a new server. Would have taken a week otherwise.
I guess it does the same as on the windows platform so no need to
write zeros on all blocks on unix anymore.
Hans Chr.
On Wed, Nov 2, 2011 at 1:49 PM, Zoltan Forray/AC/VCU zfor...@vcu.edu
wrote:
I
Anyone here started playing with this TDP? We can't get it to install.
Most folks here use a terminal window and the -i console option has
always worked in the past. With 6.3 it tried to kick in a GUI/Java
session and thus fails since it can't start an X-Windows session
Have you installed the lin_tape drivers and/or daemon?
https://www-304.ibm.com/support/docview.wss?uid=swg21397283
From: Moyer, Joni M joni.mo...@highmark.com
To: ADSM-L@VM.MARIST.EDU
Date: 10/28/2011 02:13 PM
Subject:[ADSM-L] Linux TSM Server discovering scsi tape drives
Sent
Zoltan
These are DB2 dumps. Assuming you don't need them, and by the dates you
don't, they are OK to remove
Steven
On 25 October 2011 15:17, Zoltan Forray/AC/VCU zfor...@vcu.edu wrote:
I have been looking around on our servers to cleanup large/unnecessary
files and came upon the /dumps
I have been looking around on our servers to cleanup large/unnecessary
files and came upon the /dumps/FODC_Panic_ folders with many gigs of
cores and such.
Any need to keep these around and can they be deleted? Some of them date
back to 2009.
Zoltan Forray
TSM Software Hardware
Speaking of 6.3, I downloaded all clients and TDPs and noticed the lack
of a Domino TDP for SOLARIS, which happens to be the main platform we use
for the biggest Domino servers. Is this platform being
discontinued/non-supported ? If so, any docs/notices I can point our
Domino admin to?
We have
Frank,
Thanks for the confirmation and documentation.
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to
and, if you deleted a file/object and ran a backup, all previously
inactive copies are flushed (up to the value set in your Management Class)
and the last n-copies become inactive and are kept for the number of days
specified in your MC retain only value.
From: Allen S. Rout a...@ufl.edu
To:
Welcome to the world of mixed operating systems..
Don't take this the wrong way but what does the OS have to do with things
like compressability? Compressability is based on your data. For
instance, I have dozens of Notes/Domino servers that are both Solaris AND
Windows. Domino databases
Well, now that we have multiple filesystems in this storage pool, we need
to remove one without removing the already allocated volumes.
The second filesystem we added to this FILEDEVCLASS just had a major error
and has remounted itself as READ-ONLY (ext3 journling failed).
So, how do I do this?
Within the past week, the DB backups have been failing on this server.
Looking in the db2diag.log file, I am seeing:
2011-10-06-10.31.30.820265-240 E5649679E455LEVEL: Info
PID : 14396TID : 47256765983040PROC : db2sysc 0
INSTANCE: tsminst1 NODE : 000
regards / Cordialement / مع تحياتي
Erwann SIMON
-Original Message-
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
Sender: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Date: Thu, 6 Oct 2011 11:44:29
To: ADSM-L@VM.MARIST.EDU
Reply-To: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Subject
I recently expanded the log size from 60GB to 120GB to allow for an
expected increase in transactions (was deleted 190M objects).
Now that this is over, I need to shrink it back down to 60GB since the
filespace it is using is shared by the DB and now I get a daily messages
that the DB is running
http://infosecurity.vcu.edu/phishing.html
From: Zoltan Forray/AC/VCU zfor...@vcu.edu
To: ADSM-L@VM.MARIST.EDU
Date: 09/05/2011 01:21 PM
Subject:[ADSM-L] LARGE MS-SQL TDP backup keeps failing
Sent by:ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
I am trying to backup
6.1.5.10 server. Back when there were issues with log usage due to table
reorgs, I like many folks turned off ALLOWTABLEREORG.
Recently, I did some big purging (moved a node with 189M objects to
another server). Since the DB has grown to over 200G, I decided to
reactivate ALLOWTABLEREORG this
When I remove nodes for good and someone wants a copy kept forever, I
create 2-exports and then delete from TSM. That way on the off chance
they want something, I simply import back into a TSM server.
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
UCC/Office
But, if it isn't in the database or a transportable format (export of
backupset), you won't be able to restore from the tapes.
No, it doesn't delete the data/tapes physically - just removed the DB
info.
Zoltan Forray
TSM Software Hardware Administrator
Virginia Commonwealth University
Dumb question.Did you have the correct permission/root? When I had a
similar issue, it was because I wasn't root or the filesystem owner.
From: Ehresman,David E. deehr...@louisville.edu
To: ADSM-L@VM.MARIST.EDU
Date: 09/13/2011 10:09 AM
Subject:[ADSM-L] TSM 6.2 installer
I think I know the answer to this question but figured it would be a good
question to ask,
This morning I was getting reports that backups were failing due to
backups not being able to get space in the disk stgpool.
When I did a Q STG, this is what I get:
9:25:34 AM MOON : q stg
Storage
] De la part de
Zoltan Forray/AC/VCU
Envoyé : 13 septembre 2011 10:23
À : ADSM-L@VM.MARIST.EDU
Objet : [ADSM-L] Disk storage pool 100% utilized but NOT cached
I think I know the answer to this question but figured it would be a good
question to ask,
This morning I was getting reports that backups
and only install the
RPM for license with the 6.2.1 installer from Passport Advantage ? Or
just install the RPM for license which is missing in the 6.2.3 fixpack
with the RPM command.
Best regards / Cordialement / مع تحياتي
Erwann SIMON
Le 09/09/2011 16:50, Zoltan Forray/AC/VCU a écrit :
So I
We are building a new server and decided to go with RedHat 6. DB2
Requirements page says RHEL 6 is valid for DB2 9.7 with Fix Pack 4.
When we try to run the installation for base 6.2.1 (couldn't find a 6.2.3
in Passport), it chokes saying we are missing Linux compat-libstdc++
(libstdc++so.6)
I don't think there is a firewall.
Well, it got further (700GB) before being killed by the TSM server.
9/6/2011 12:05:04 PM ANR0524W Transaction failed for session 59224 for
node ACIPENSER.VCU.EDU (TDP MSSQL Win32) - data transfer interrupted.
9/6/2011 12:05:05 PM ANR0487W Session 59224 for node
I am trying to backup a LARGE SQL (4TB) database via the SQL TDP, without
success.
It will run for a while and then die - usually with the error: ANS1017E
(RC-50): Session Rejected : TCP/IP communications failure. The last try
backed up 125GB before failing.
I have greatly increased the server
I would like to get some idea of what features of the Windows client do you
install, by default, when doing a brand-new client install.
Folks here are just starting to realize the benefits of using the Journaling
feature (yeah, I know, it is not a new feature - I have been trying to get
folks
Sparrman
Daniel Sparrman Exist i Stockholm AB Växel: 08-754 98 00 Fax: 08-754 97 30
daniel.sparr...@exist.se http://www.existgruppen.se Posthusgatan 1 761 30
NORRTÄLJE -ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU skrev: -
Till: ADSM-L@VM.MARIST.EDU Från: Zoltan Forray/AC/VCU zfor
30
NORRTÄLJE -ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU skrev: -
Till: ADSM-L@VM.MARIST.EDU Från: Zoltan Forray/AC/VCU zfor...@vcu.edu Sänt
av: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU Datum: 08/24/2011 16:27
Ärende: [ADSM-L] Poll: What Windows client features do you install
IBM Tivoli
Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager
ADSM: Dist Stor Manager ADSM-L@vm.marist.edu wrote on 2011-08-24
10:27:06: From: Zoltan Forray/AC/VCU zfor...@vcu.edu To:
ADSM-L@vm.marist.edu Date: 2011
We had an incident this morning that ended up being caused by a Windows
server that was renamed (internally) and connected to a domain (previously
standalone), thus initiating a full backup of an 8TB volume/space, since
TSM now sees it as new filespaces.
How do I handle this to avoid a full
Please correct me if I am wrong, but I was under the impression that if a
Windows node does NOT have a NODENAME statement in it's dsm.opt, it simply
asks the OS for the hostname and uses that. This value is also used for
the filespace names.
So, if this Windows node has been backing up without a
Thomas,
Thanks for both of your responses. You have confirmed what we are seeing.
We rooted through the registry and see the keys with the old node name
and encrypted password. The box was renamed and rebooted but the GUI was
never bought up. As soon as we bought up the GUI, it grabbed the
Of course, even with a NODENAME statement and reworking the scheduler, the
filespace names are still based on the hostname. We have renamed plenty
of other servers that had nodename statements and the first backup was
brand-new.
Zoltan Forray
TSM Software Hardware Administrator
Virginia
Keith,
Thanks for the suggestions. Fortunately we don't use lots of virtual
volumes. Sounds like the Reconcile command was added as a quick-fix to
resolve inherent problem somewhere deep inside.
From:
Keith Arbogast warbo...@indiana.edu
To:
ADSM-L@VM.MARIST.EDU
Date:
08/02/2011 08:59 AM
Sure - Let the force be with you (sorry - couldn't resist ;---)
DELETE VOLHISTORY todate=today volume=your-volume-number type=remote
force=yes
You still might need to change the volume status to scratch on the LM
after your deleted it.
Zoltan Forray
TSM Software Hardware Administrator
Hmm - is the RECONCILE command I should run, regularly? I just ran
it on all 5.5 servers (they perform daily DBSNAPSHOT backups to an offsite
server) and all of them had errors to reconcile. The 6.x servers didn't
have any errors.
As for these ghost volumes/storage, reconciling its
Back a while ago, one of my smaller servers kept overflowing it's disk LZ
and couldn't access tape drives. To handle the overload, I setup virtual
volume backups defining a storage pool on another TSM server that had
plenty of disk space. When the tape drives were accessible, I migrated
these
Mark,
Any way to suppress these harmless/annoying messages?
Since they are harmless, am I right in guessing someone forgot to turn
off some debugging code/messages?
While I don't mind opening up a PMR, I would assume there is going to be a
quick update (6.1.5.11?) to address it?
Zoltan
1 - 100 of 1285 matches
Mail list logo
