We see this on some ePMP1000's on 40MHz channels with 30-40 SMs
generating 60-80Mbps traffic. It seems the AP's CPU pegs occasionally,
and SNMP queries time out. ePMP2000's don't have this problem.
Vlad
On 2/4/2019 5:48 PM, Nate Burke wrote:
I can't remember if this was discussed before or
0 problems with epmp at full load. 30 megs or more. Full downlink%.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Feb 4, 2019 at 9:32 PM Nate Burke wrote:
> Yea this is just straight MRTG doing 5 minute polling. It does seem to
>
Yea this is just straight MRTG doing 5 minute polling. It does seem to
happen more on our older sites, which would be Gen1 EPMP1000.
On 2/4/2019 6:45 PM, Mathew Howard wrote:
I haven't seen anything like that, but I think we're only using
something like 5 minute intervals with SNMP on ours...
I haven't seen anything like that, but I think we're only using something
like 5 minute intervals with SNMP on ours... I suppose it might have issues
with more frequent checks.
On Mon, Feb 4, 2019 at 6:42 PM Josh Baird wrote:
> Not having this issue.
>
> Sent from my iPhone
>
> > On Feb 4,
Not having this issue.
Sent from my iPhone
> On Feb 4, 2019, at 3:48 PM, Nate Burke wrote:
>
> I can't remember if this was discussed before or not. When an EPMP goes
> under load, like ~30mb or so, does it stop responding to SNMP? Across my
> network EPMP 1000's with Sync will start
