Re: [AFMUG] ePMP - itelite panel question

Isn't that backwards ? The station would transmit with less powerno ? Sent from my Verizon Wireless 4G LTE Smartphone - Reply message - From: "Josh Luthman" To: Subject: [AFMUG] ePMP - itelite panel question Date: Tue, Jul 28, 2015 10:18 PM Did you set the target to -70?  If so y

[AFMUG] mikrotik + mimosa gig ethernet problems

any ideas how to get a mimosa to link at full gig on a mikrotik? when I first installed it was auto/auto and worked fine and 3 weeks later it still says gig on both devices but won't pass much traffic, I tried setting the mimosa on manual for 1000fdx and setting the mikrotik on manual 1000fdx but w

Re: [AFMUG] ePMP - itelite panel question

No, it's currently set at -60. Josh Luthman wrote: Did you set the target to -70? If so your AP will throttle back power to that station to that threshold. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 28, 2015 11:14 PM, "Jay Weekley"

Re: [AFMUG] ePMP - itelite panel question

Did you set the target to -70? If so your AP will throttle back power to that station to that threshold. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 28, 2015 11:14 PM, "Jay Weekley" wrote: > Do you mean the SM target receive level? For

Re: [AFMUG] ePMP - itelite panel question

Do you mean the SM target receive level? For example, we'll have both an integrated and connectorized SM receive at -70 Sean Heskett wrote: ATP would change the recieve signal at the AP but not the SM. On Tuesday, July 28, 2015, Josh Luthman > wrote:

Re: [AFMUG] How many of you guys run MT wireless?

Just pulled up the 2011LS model, board without a case. No provisions for adding another card. The 2011 has a USB port, but MT doesn't seem to have the best track record with USB wireless, nor am I a fan of using one for an AP. - Original Message - From: David Milholen To: af@af

Re: [AFMUG] ePMP - itelite panel question

16 dBi is pretty small. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: "Jay Weekley" To: af@afmug.com Sent: Tuesday, July 28, 2015 5:09:12 PM Subject: [AFMUG] ePMP -

Re: [AFMUG] ePMP - itelite panel question

Pretty confident it's both. Especially if you look at the monitor wireless page... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 28, 2015 8:46 PM, "Sean Heskett" wrote: > ATP would change the recieve signal at the AP but not the SM. > > >

Re: [AFMUG] ePMP - itelite panel question

ATP would change the recieve signal at the AP but not the SM. On Tuesday, July 28, 2015, Josh Luthman wrote: > Do you have ATP set? Are you too close that the power is going down for > your unit? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > T

Re: [AFMUG] How many of you guys run MT wireless?

Check to see if the board has the connector for the wireless cards On 7/28/2015 7:31 PM, Glen Waldrop wrote: I'd probably have a 2011 here if I had a way to add 5GHz to it. We have one running as my edge router, without wireless of course. - Original Message - *From:* Dennis Bu

Re: [AFMUG] How many of you guys run MT wireless?

I'd probably have a 2011 here if I had a way to add 5GHz to it. We have one running as my edge router, without wireless of course. - Original Message - From: Dennis Burgess To: af@afmug.com Sent: Tuesday, July 28, 2015 5:37 PM Subject: Re: [AFMUG] How many of you guys run MT

Re: [AFMUG] First Bridgewave GE80 instsll

Just under 100...rough... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 28, 2015 at 6:51 PM, Jaime Solorza wrote: > They will fall three feet onto blinding hot ass roof! > On Jul 28, 2015 4:19 PM, "Josh Luthman" > wrote: > >> Put th

Re: [AFMUG] Mimosa Performance Boost

Friday already? Time to pop open an ice cold Tecate. On Jul 28, 2015 2:46 PM, "Chuck McCown" wrote: > Is it friday? > > *From:* Jay Kreshel > *Sent:* Tuesday, July 28, 2015 2:43 PM > *To:* af@afmug.com > *Subject:* [AFMUG] Mimosa Performance Boost > > >Get more out of the Mimosa B5 Backh

Re: [AFMUG] How many of you guys run MT wireless?

Or 2011s.. I see them quite a but. More 951U though for most networks . Dennis Burgess, CTO, Link Technologies, Inc. den...@linktechs.net – 314-735-0270 x103 – www.linktechs.net From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Luth

Re: [AFMUG] How many of you guys run MT wireless?

951 = home router 5 ethernet ports, 1 wireless card - just like every Netgear/Linksys/Belkin/etc Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 28, 2015 at 6:19 PM, Glen Waldrop wrote: > If you're talking home routers, not sure. > >

Re: [AFMUG] How many of you guys run MT wireless?

Talking about the RB951-2HnD that is. - Original Message - From: Glen Waldrop To: af@afmug.com Sent: Tuesday, July 28, 2015 5:19 PM Subject: Re: [AFMUG] How many of you guys run MT wireless? If you're talking home routers, not sure. I use the RB750 line quite a bit, no

Re: [AFMUG] How many of you guys run MT wireless?

If you're talking home routers, not sure. I use the RB750 line quite a bit, no issues and the POE model is excellent. The 951 should be functionally the same as the 91x models with extra ports. I have quite a few of those in the air with no issues. My personal network has an RB750 and a reclaim

Re: [AFMUG] First Bridgewave GE80 instsll

Put those tools in your bucket before they fall!!! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 28, 2015 at 6:11 PM, Jaime Solorza wrote: > Followed their design on this install >

Re: [AFMUG] ePMP - itelite panel question

Do you have ATP set? Are you too close that the power is going down for your unit? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 28, 2015 at 6:09 PM, Jay Weekley wrote: > We purchased some of the 16 dBi MIMO panels for use with conn

Re: [AFMUG] How many of you guys run MT wireless?

QRTs and SXTs are the way to go.. ☺ We also bulid quite a few sectors. WE have customers that pefer itelete antennas, and some prefer rfelememts.. Some prefer KP antennas as well. Most of those don’t need shied kits as well. Dennis Burgess, CTO, Link Technologies, Inc. den...@linktechs.net

[AFMUG] ePMP - itelite panel question

We purchased some of the 16 dBi MIMO panels for use with connectorized ePMP SMs but have found the receive signal to be exactly the same as we get with an integrated unit. We've got the gain of the antenna entered in the configuration tab and have played with other settings but nothing improve

Re: [AFMUG] Telrad Fibre runs

Time is always money.. Time to train Time to do Time to deploy Order + get + deploy On 07/28/2015 11:01 AM, TJ Trout wrote: Waste of money, you can buy surplus fiber for next to nothing on ebay and terminate it yourself as easy as cat5 On Tue, Jul 28, 2015 at 6:28 AM, David

Re: [AFMUG] How many of you guys run MT wireless?

What's the best MT wireless router for customers you guys using?, with best range and low DOA rate?  — Sent from Mailbox On Tue, Jul 28, 2015 at 5:12 PM, Glen Waldrop wrote: > I'm a 90% MT shop. > Upgrading everything to 802.11n slowly, just replaced a Crossroads in a 19dBi > Rootenna with

[AFMUG] How many of you guys run MT wireless?

I'm a 90% MT shop. Upgrading everything to 802.11n slowly, just replaced a Crossroads in a 19dBi Rootenna with a QRT-2HnD, 17dBi dual polarity. Receive signal went from -83 to -70 on a 5MHz channel. I'm quite impressed. I'm going to test the unit and see if it is possible the old one was damage

Re: [AFMUG] Mimosa Performance Boost

And Gmail tagged it as spam. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 28, 2015 at 5:04 PM, Chuck McCown wrote: > Nice spin > > Pretty full of graphics that would not fit on my email client. > > -Original Message- Fro

Re: [AFMUG] Mimosa Performance Boost

Nice spin Pretty full of graphics that would not fit on my email client. -Original Message- From: Christopher Tyler Sent: Tuesday, July 28, 2015 2:51 PM To: af@afmug.com Subject: Re: [AFMUG] Mimosa Performance Boost It's a firmware release announcement not a sales offer. Right? -

Re: [AFMUG] Mimosa Performance Boost

It's a firmware release announcement not a sales offer. Right? -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 - Original Message - From: "Chuck McCown" To: af@afmug.com Sent: Tuesday, July 28, 2015 3:46:45 PM Subject: Re: [AFMUG] Mimosa P

Re: [AFMUG] Mimosa Performance Boost

Is it friday? From: Jay Kreshel Sent: Tuesday, July 28, 2015 2:43 PM To: af@afmug.com Subject: [AFMUG] Mimosa Performance Boost Get more out of the Mimosa B5 Backhaul at an even better price! Mimo

[AFMUG] Mimosa Performance Boost

[http://www.mimosa.co/uploads/images/logo/Logo-Mimosa-RGB-r.png] Get more out of the Mimosa B5 Backhaul at an even better price! Mimosa is pleased to announce firmware version 1.2.0 for the B5 and B5c, delivering fantastic performance enhancements along with an incredible new price. [http:

Re: [AFMUG] Telrad Fibre runs

You're using SOC's ? On 7/28/2015 12:01 PM, TJ Trout wrote: Waste of money, you can buy surplus fiber for next to nothing on ebay and terminate it yourself as easy as cat5 On Tue, Jul 28, 2015 at 6:28 AM, David > wrote: Best-tronics.com They will make wha

Re: [AFMUG] Telrad Fibre runs

Waste of money, you can buy surplus fiber for next to nothing on ebay and terminate it yourself as easy as cat5 On Tue, Jul 28, 2015 at 6:28 AM, David wrote: > Best-tronics.com > > They will make what ever setup you need its what they do.. > > Spec it buy it delivered > > > > On 07/27/2015 04:5

Re: [AFMUG] Cambium Networks Introduces Ruggedized 450i Solution That Triples Power And Range To Cambium 450 Platform

Friends don't let friends use omnis lol ;) On Tuesday, July 28, 2015, Kurt Fankhauser wrote: > I can't wait to put this new AP on an omni. > > On Mon, Jul 27, 2015 at 10:27 PM, Sean Heskett > wrote: > >> Bwahahaha so true!!! >> >> >> >> On Monday, July 27, 2015, Jon Langeler > > wrote: >> >

Re: [AFMUG] Cambium Networks Introduces Ruggedized 450i Solution That Triples Power And Range To Cambium 450 Platform

I can't wait to put this new AP on an omni. On Mon, Jul 27, 2015 at 10:27 PM, Sean Heskett wrote: > Bwahahaha so true!!! > > > > On Monday, July 27, 2015, Jon Langeler wrote: > >> Cambium's pricing model is to nickel and dime the first year so you find >> other productsthen a year later

Re: [AFMUG] Telrad Fibre runs

Best-tronics.com They will make what ever setup you need its what they do.. Spec it buy it delivered On 07/27/2015 04:52 PM, Andreas Wiatowski wrote: Looking for pre-made. Cheers, __ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com