Re: [AFMUG] GPS antennas

2018-03-28 Thread Forrest Christian (List Account)
I've always lucked out and been able to get a used PCTEL/MAXRAD commercial ones. They're about $160 street price new. GPS-TMG-40NMS as an example. Not sure if these are good for GLONASS and the like though On Wed, Mar 28, 2018 at 2:45 PM, Chuck McCown wrote: > Which

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Brandon Yuchasz
We did as well. Love it they simply stop passing power though at all. So DEAD site. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jon Langeler Sent: Wednesday, March 28, 2018 8:31 AM To: af@afmug.com Subject: Re: [AFMUG] Cheap consumer level SNMP capable UPS? We’ve had upss simply

Re: [AFMUG] Cable protector for Steve

2018-03-28 Thread Steve Jones
i took over the installers van while hes got broken bones, i have it pretty "organized" but the other day i had to do 7 ubnt with reflectors to epmp swaps, how does one organize that volume of dishes? On Wed, Mar 28, 2018 at 10:03 PM, Adam Moffett wrote: > No trick. I

Re: [AFMUG] Cable protector for Steve

2018-03-28 Thread Adam Moffett
No trick. I just tuck them inside somewhere. I wish I had pics of my brother's Time Warner Cable van. He was impressively well organized. -- Original Message -- From: "Steve Jones" To: af@afmug.com Sent: 3/28/2018 10:44:42 PM Subject: Re: [AFMUG] Cable

Re: [AFMUG] Cable protector for Steve

2018-03-28 Thread Steve Jones
i have a pipe on the top of the van that holds 10 foot sticks so some PVC conduit would work. On that note, any trick on keeping 8 or 6 foot sticks as you cut them down in the pipe on top of the van without the other pipes pushing them up? On Wed, Mar 28, 2018 at 9:19 PM, Adam Moffett

Re: [AFMUG] OT Fw: Hyundai 285 Black on Black 59c/watt Limited TimeOnly!

2018-03-28 Thread Chuck McCown
I like grid tie inverters. Chint is one brand that I have use quite a number of. Hard to go wring with Sunny Boy. -Original Message- From: Jon Langeler Sent: Wednesday, March 28, 2018 8:40 PM To: af@afmug.com Subject: Re: [AFMUG] OT Fw: Hyundai 285 Black on Black 59c/watt Limited

Re: [AFMUG] OT Fw: Hyundai 285 Black on Black 59c/watt Limited Time Only!

2018-03-28 Thread Jon Langeler
What about controller and such? Recommendations? Jon Langeler Michwave Technologies, Inc. > On Mar 28, 2018, at 10:27 PM, Chuck McCown wrote: > > That is your landed price. > > -Original Message- From: Robert > Sent: Wednesday, March 28, 2018 5:19 PM > To:

Re: [AFMUG] Indoor ONT fiber

2018-03-28 Thread Chuck McCown
https://www.corning.com/worldwide/en/products/communication-networks/products/unicam-connectors-resource-center.html From: Jason McKemie Sent: Wednesday, March 28, 2018 5:16 PM To: af@afmug.com Subject: Re: [AFMUG] Indoor ONT fiber Flat drop termination for $15? That could be useful, any

Re: [AFMUG] OT Fw: Hyundai 285 Black on Black 59c/watt Limited Time Only!

2018-03-28 Thread Chuck McCown
That is your landed price. -Original Message- From: Robert Sent: Wednesday, March 28, 2018 5:19 PM To: af@afmug.com Subject: Re: [AFMUG] OT Fw: Hyundai 285 Black on Black 59c/watt Limited Time Only! And that price with the tarriffs? On 3/28/18 4:12 PM, ch...@wbmfg.com wrote:

[AFMUG] Cable protector for Steve

2018-03-28 Thread Adam Moffett
I tripped over these pics when looking for the fiber demarc pic. Steve had asked last week about protecting cable from dogs. I do this for weed trimmers, but a longer piece ought to limit canine access as well. I cut the slot in the conduit so I can slip it over an already installed cable.

Re: [AFMUG] Getting gooder at this

2018-03-28 Thread Jaime Solorza
For this? Nope...these are used to calibrate and test sensors from outside clarifier. It's all Sagelok stainless still stuff...all kinds of corrosive gases along with toxic ones as well Jaime Solorza On Wed, Mar 28, 2018, 8:01 PM Mitch Koep wrote: > But you used the

Re: [AFMUG] Getting gooder at this

2018-03-28 Thread Mitch Koep
But you used the wrong size LOL On 3/28/2018 8:45 PM, Jaime Solorza wrote: Installed tubing for gas sensors...we have to custom cut and bend around existing pipes... Jaime Solorza

Re: [AFMUG] OT Fw: Hyundai 285 Black on Black 59c/watt Limited Time Only!

2018-03-28 Thread Robert
And that price with the tarriffs? On 3/28/18 4:12 PM, ch...@wbmfg.com wrote: *From:* Affordable Solar *Sent:* Wednesday, March 28, 2018 4:55 PM *To:* ch...@wbmfg.com *Subject:* Hyundai 285 Black on Black 59c/watt Limited Time Only! Affordable Solar News and product Information

Re: [AFMUG] Indoor ONT fiber

2018-03-28 Thread Jason McKemie
Flat drop termination for $15? That could be useful, any part numbers? I'd probably just run it through the wall and mount the ONT to a floor joist when possible. On Wed, Mar 28, 2018 at 6:14 PM, wrote: > Not only that, you can field terminate the drop with a unicam for about

Re: [AFMUG] Indoor ONT fiber

2018-03-28 Thread chuck
Not only that, you can field terminate the drop with a unicam for about $15 So no $45 jumper. From: ch...@wbmfg.com Sent: Wednesday, March 28, 2018 5:11 PM To: af@afmug.com Subject: Re: [AFMUG] Indoor ONT fiber I just hate indoor ONTs. People do not respect the fiber. It gets cut and

Re: [AFMUG] Indoor ONT fiber

2018-03-28 Thread chuck
I just hate indoor ONTs. People do not respect the fiber. It gets cut and mangled etc. I guess if you are nailing the ONT on the wall somewhere, but if it is similar to a modem on someone’s desk you are asking for trouble. From: Craig Schmaderer Sent: Wednesday, March 28, 2018 4:19 PM

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

2018-03-28 Thread chuck
They will keep equipment safe. -Original Message- From: Matt Sent: Wednesday, March 28, 2018 4:08 PM To: af@afmug.com Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa OK, so grounds are related to the problem. There may be something unusual with timing pulses

Re: [AFMUG] Indoor ONT fiber

2018-03-28 Thread Craig Schmaderer
Clearfield flexible fieldshield patch cables with removable end. Run from outside splice box to inside ont. Almost always use the 25 footers. Expensive. $45. I have yet found a better solution that doesn't involve more labor. From: Af on

Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa

2018-03-28 Thread Matt
> OK, so grounds are related to the problem. > > There may be something unusual with timing pulses on the power that is > causing the surge suppressor to fire. > Forrest would know much more than I about that. > > I honestly don’t know if anyone has tried my product with a Medusa before. > I have

Re: [AFMUG] Indoor ONT fiber

2018-03-28 Thread Colin Stanners
We just run a bit of conduit from the NID to the hole leading inside. If you try to run armoured/UV-shielded-type fiber indoors you'll find it difficult to flex and probably get complaints about the looks. On Wed, Mar 28, 2018 at 4:10 PM, Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote:

[AFMUG] Indoor ONT fiber

2018-03-28 Thread Jason McKemie
Currently I just run a flat drop fiber to an enclosure on the side of the building, then cat5 inside. Those of you doing indoor ONTs, what are you using for fiber from the outdoor splice closure to the ONT? It would need to be UV rated and probably armored since I would prefer to not have to run

Re: [AFMUG] GPS antennas

2018-03-28 Thread Chuck McCown
Which antenna do you recommend? From: Forrest Christian (List Account) Sent: Wednesday, March 28, 2018 1:02 PM To: af Subject: Re: [AFMUG] GPS antennas Every external 'commercial' GPS antenna that I've seen has a N connector on the bottom of it. You can buy 'cheap chinese outdoor' GPS

Re: [AFMUG] DSLAM choices for mdu

2018-03-28 Thread Sean Heskett
Netsys NV-2400H On Wed, Mar 28, 2018 at 2:26 PM Sam Lambie wrote: > My usual vendor Versatek has discontinued their 8 port VDSL DSLAM. I am > looking for something similar. Not opposed to 24 port as well. > What are you guys using out there? > > > -- > -- > *Sam Lambie* >

Re: [AFMUG] DSLAM choices for mdu

2018-03-28 Thread Keefe John
I wish UBNT would come out with something affordable! Keefe On 3/28/2018 3:26 PM, Sam Lambie wrote: My usual vendor Versatek has discontinued their 8 port VDSL DSLAM. I am looking for something similar. Not opposed to 24 port as well. What are you guys using out there? -- -- *Sam Lambie*

[AFMUG] DSLAM choices for mdu

2018-03-28 Thread Sam Lambie
My usual vendor Versatek has discontinued their 8 port VDSL DSLAM. I am looking for something similar. Not opposed to 24 port as well. What are you guys using out there? -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Josh Luthman
Think it's cheaper to use an APC with the rack cards (9617-9619) from ebay. They're roughly $15. The SNMP support is fantastic, better than Mikrotik IMO. Using Powercode I get alerts when the batteries get used at all (dipped below 100%), the input/output voltage is anything outside of 120 +/-

Re: [AFMUG] GPS antennas

2018-03-28 Thread Eric Muehleisen
Our techs carry a spool of RG6 and have screw-on N-type connectors for doing LTE installs. I've run a few long GPS runs using RG59/6. The compression ends are much easier to crimp on than LMR IMO. On Wed, Mar 28, 2018 at 2:10 PM, Carl Peterson wrote: > I'd vote for

Re: [AFMUG] GPS antennas

2018-03-28 Thread Carl Peterson
I'd vote for N, but just because we have always used N connectors and LMR-400 and have it in the warehouse. Seems like overkill to pull LMR-400 for GPS and I'm sure there is an equivalent EZ connector and smaller cable out there but I wouldn't want to tool and stock up for it to just put up one

Re: [AFMUG] See what happens when you don't pay attention in math class!

2018-03-28 Thread Jaime Solorza
They are going to take some parts off but boiler is one huge piece. Jaime Solorza On Mar 28, 2018 11:28 AM, "Adam Moffett" wrote: Is it truly easier to hammer out the concrete than to take apart the machine? Just wondering. -- Original Message -- From: "Jaime

Re: [AFMUG] GPS antennas

2018-03-28 Thread Forrest Christian (List Account)
Every external 'commercial' GPS antenna that I've seen has a N connector on the bottom of it. You can buy 'cheap chinese outdoor' GPS antennas with a long lead and a SMA connector on the end as wellbut I'm not sure I'd trust those. On the equipment end, there doesn't seem to be a standard.

Re: [AFMUG] Serverplus

2018-03-28 Thread Jay Weekley
It's a real town in Alabama by the way. Jay Weekley wrote: Anyone want to guess how you pronounce Ewtah? CBB - Jay Fuller wrote: Arab Mobile just to name a few... - Original Message - *From:* Josh Luthman *To:* af@afmug.com

Re: [AFMUG] Serverplus

2018-03-28 Thread Jay Weekley
Anyone want to guess how you pronounce Ewtah? CBB - Jay Fuller wrote: Arab Mobile just to name a few... - Original Message - *From:* Josh Luthman *To:* af@afmug.com *Sent:* Monday, March 26, 2018 9:17 AM

Re: [AFMUG] See what happens when you don't pay attention in math class!

2018-03-28 Thread Adam Moffett
Is it truly easier to hammer out the concrete than to take apart the machine? Just wondering. -- Original Message -- From: "Jaime Solorza" To: "Animal Farm" Sent: 3/28/2018 1:27:19 PM Subject: [AFMUG] See what happens when you don't pay

Re: [AFMUG] Serverplus

2018-03-28 Thread CBB - Jay Fuller
+1 (or 10s) - Original Message - From: Tim Reichhart To: af@afmug.com Sent: Wednesday, March 28, 2018 12:02 PM Subject: Re: [AFMUG] Serverplus alot... -Original Message-

Re: [AFMUG] Serverplus

2018-03-28 Thread Matt Hoppes
Lima - is it LEEEMA... or LIE MA? On 3/28/18 1:02 PM, Tim Reichhart wrote: alot... -Original Message- From: "Mike Hammett" > To: af@afmug.com

Re: [AFMUG] Serverplus

2018-03-28 Thread Tim Reichhart
alot...   -Original Message- From: "Mike Hammett" To: af@afmug.com Date: 03/28/18 12:40 Subject: Re: [AFMUG] Serverplus How many of these are just the local people pronounce it wrong? - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange

Re: [AFMUG] Serverplus

2018-03-28 Thread Mike Hammett
How many of these are just the local people pronounce it wrong? - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Tim Reichhart" To: af@afmug.com Sent: Wednesday,

Re: [AFMUG] Serverplus

2018-03-28 Thread Tim Reichhart
Josh some people cant even say it correctly even know you from area just like russia they say it weird. Tim   -Original Message- From: "CBB - Jay Fuller" To: af@afmug.com Date: 03/28/18 12:16 Subject: Re: [AFMUG] Serverplus   Arab Mobile just to name a

Re: [AFMUG] Serverplus

2018-03-28 Thread Chuck McCown
Nevada, Mo. Nevada – the state- if you are Trump. From: CBB - Jay Fuller Sent: Wednesday, March 28, 2018 10:16 AM To: af@afmug.com Subject: Re: [AFMUG] Serverplus Arab Mobile just to name a few... - Original Message - From: Josh Luthman To: af@afmug.com Sent: Monday, March

Re: [AFMUG] Serverplus

2018-03-28 Thread CBB - Jay Fuller
Arab Mobile just to name a few... - Original Message - From: Josh Luthman To: af@afmug.com Sent: Monday, March 26, 2018 9:17 AM Subject: Re: [AFMUG] Serverplus Here in Ohio it's very easy to know you're not from this neck of the woods (probably western third of the

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Justin Marshall
Reason I ask, is because reading the Mikrotik forums really make it sound hit or miss as to which APC’s work with which model Mikrotiks This thread for e.g. https://forum.mikrotik.com/viewtopic.php?f=2=12670=428800=rb2011+ups+usb#p428800. This guy tested different APC’s with different

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Colin Stanners
Note that some Mikrotik USB ports only run at USB2.0 speed (480mbit) while many UPSes only run at USB1.0 speeds (12 / 1.5mbit). I saw this issue while trying to connect a Back-UPS 350 to a RB951. IIRC inserting a USB2.0 hub between them will fix it. On Wed, Mar 28, 2018 at 7:54 AM, Justin

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread jason
To be honest I go to staples pick one that has a USB port. Sent from my iPhone > On Mar 28, 2018, at 5:54 AM, Justin Marshall wrote: > > Can you recommend a particular model of APC (preferably cheap) that works > over USB to a Mikrotik 2011? > > I’ve tested with a

Re: [AFMUG] OT My son Frank

2018-03-28 Thread Jaime Solorza
And cavity searched? How cliche' Jaime Solorza On Wed, Mar 28, 2018, 7:40 AM Robert wrote: > Curses, stripped again... > > On 3/28/18 6:37 AM, Chuck McCown wrote: > > I will try this again. It is a 3ppp recording. > > *From:* Lewis Bergman > > *Sent:* Tuesday, March

Re: [AFMUG] OT My son Frank

2018-03-28 Thread Robert
Curses, stripped again... On 3/28/18 6:37 AM, Chuck McCown wrote: I will try this again.  It is a 3ppp recording. *From:* Lewis Bergman *Sent:* Tuesday, March 27, 2018 8:47 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] OT My son Frank That is quite the teaser On Tue, Mar 27, 2018, 8:40 PM Chuck

Re: [AFMUG] OT My son Frank

2018-03-28 Thread Chuck McCown
It was a fun recording of him giving a caller reading from a script hell about the do not call registry and the fine he will collect from them. From: Chuck McCown Sent: Wednesday, March 28, 2018 7:37 AM To: af@afmug.com Subject: Re: [AFMUG] OT My son Frank I will try this again. It is a

Re: [AFMUG] OT My son Frank

2018-03-28 Thread Chuck McCown
I will try this again. It is a 3ppp recording. From: Lewis Bergman Sent: Tuesday, March 27, 2018 8:47 PM To: af@afmug.com Subject: Re: [AFMUG] OT My son Frank That is quite the teaser On Tue, Mar 27, 2018, 8:40 PM Chuck McCown wrote:

Re: [AFMUG] OT My son Frank

2018-03-28 Thread Chuck McCown
Guess the attachment got stripped. From: Lewis Bergman Sent: Tuesday, March 27, 2018 8:47 PM To: af@afmug.com Subject: Re: [AFMUG] OT My son Frank That is quite the teaser On Tue, Mar 27, 2018, 8:40 PM Chuck McCown wrote:

Re: [AFMUG] GPS antennas

2018-03-28 Thread Chuck McCown
What does the CMM line of products use for an antenna? From: Jaime Solorza Sent: Tuesday, March 27, 2018 7:59 PM To: Animal Farm Subject: Re: [AFMUG] GPS antennas I have done N to SMA adapter on two jobs where antenna had N connectors. But most of the GPS antennas install in vehicle for

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Jon Langeler
We’ve had upss simply shut down below freezing which is totally not cool Jon Langeler Michwave Technologies, Inc. > On Mar 28, 2018, at 9:03 AM, Adam Moffett wrote: > > Yeah temperature compensation is an oft overlooked feature. > > > -- Original Message -- >

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Adam Moffett
Yeah temperature compensation is an oft overlooked feature. -- Original Message -- From: "Jon Langeler" To: af@afmug.com Sent: 3/27/2018 7:13:57 PM Subject: Re: [AFMUG] Cheap consumer level SNMP capable UPS? How do they handle say 0 deg F? Jon Langeler

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

2018-03-28 Thread Justin Marshall
Can you recommend a particular model of APC (preferably cheap) that works over USB to a Mikrotik 2011? I’ve tested with a couple older ones I have around here, and can’t get the 2011 to recognize the APC through /system ups. Thanks, Justin From: Af [mailto:af-boun...@afmug.com] On Behalf Of

Re: [AFMUG] site inverter +48

2018-03-28 Thread can...@believewireless.net
We use these and have been very happy with them: http://www.ict-power.com/product/dc-ac-pure-sine-wave-power-inverters/ The 300W does have a 3 second 600W overload cutoff. On Wed, Mar 28, 2018 at 6:52 AM, Brian Kelly wrote: > Most of our sites are 24/48VDC, but use

Re: [AFMUG] site inverter +48

2018-03-28 Thread Brian Kelly
Most of our sites are 24/48VDC, but use these guys when we need AC at a site https://www.majorpower.com/products?product_type=majorsine=48-vdc= They are just an inverter w/ bypass, and take a pretty standard SNMP card to manage. Brian On Wed, Mar 28, 2018 at 2:15 AM, TJ Trout