Ah, yeah, I forgot to mention that. 16 watts sounds about right... I'd
figure 18 to be safe.
On Fri, Feb 16, 2018 at 12:06 PM, Darin Steffl
wrote:
> 2000 definitely has a heater in it for startup if it's too cold. This only
> powers on during power up if the radio has
2000 definitely has a heater in it for startup if it's too cold. This only
powers on during power up if the radio has been offline and is below a
certain temperature. It only runs run 2 minutes or less in our experience
until a certain internal temp is reached. We see about 16 watts usage with
the
Make sure to check if the ePMP 2000 has a cold start heater like the 1000
does - that tripped us up a couple times.
On Fri, Feb 16, 2018 at 10:53 AM, Sam Lambie wrote:
> Thanks Mathew
>
> On Thu, Feb 15, 2018 at 5:33 PM, Mathew Howard
> wrote:
>
>>
Thanks Mathew
On Thu, Feb 15, 2018 at 5:33 PM, Mathew Howard wrote:
> Typically 8-10 watts, from what I've seen.
>
> On Thu, Feb 15, 2018 at 5:33 PM, Sam Lambie wrote:
>
>> Hey all,
>>
>> Has anyone cared to note what the real wattage draw of the AP
Typically 8-10 watts, from what I've seen.
On Thu, Feb 15, 2018 at 5:33 PM, Sam Lambie wrote:
> Hey all,
>
> Has anyone cared to note what the real wattage draw of the AP is under
> load? I have a solar site that is getting close to full power wise and am
> looking to put
Hey all,
Has anyone cared to note what the real wattage draw of the AP is under
load? I have a solar site that is getting close to full power wise and am
looking to put something in that is light on juice.
thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office