Re: [AFMUG] tying down wires

[Steve Jones]

our partner retail shop got in with office depot for a period, we had
access to super dirt cheap command strip stuff. I loved it here at home,
like jesus spat his child juice upon my walls to absolve me of all nail
holes. but in outdoor enclosures, it jut falls off like a flaccid member of
an unaccompanied church. Mileage varies on everything. Zip ties are awful,
in enclosure I buy the 3/4 inch velcro in the 30 foot rolls, I cut it in
half, it makes me happy for the first ten minutes, then I close the box and
know its going to look like a hookers pretty bits next time I open it,  we
are never happy. Unless youre one of those guys with both the time and the
patience for wire tying with that string, I have seen so much sexiness in
that. I really want the boss to hire that guy and have Jaime guide him,
because at the end of the day my enclosures look like an atom bomb bred
with a MOAB and its child has the runs.

On Sat, Feb 10, 2018 at 6:27 PM, Jaime Solorza <losguyswirel...@gmail.com>
wrote:

> We use them in our enclosures for yearshold up well
>
> Jaime Solorza
>
> On Feb 10, 2018 4:53 PM, "Jeremy" <jeremysmi...@gmail.com> wrote:
>
>> I tried those once, and the adhesive failed in the Summer when the box
>> got hot.  Granted, this was for another company before we were using fans.
>> Have any of you been using them long-term?  How do they hold up over the
>> years?
>>
>> On Sat, Feb 10, 2018 at 10:26 AM, David Coudron <
>> david.coud...@advantenon.com> wrote:
>>
>>> We have started using these zip tie saddles as well inside our
>>> cabinets.   What we like about them besides being cheap (10 cents apiece)
>>> is that they have adhesive on the back for quick connection to
>>> metal/plastic and a screw hole for attaching to more porous material.
>>> Additionally you can run two zip ties through every one, which lets you
>>> double layer the wires over the zip tie saddle.
>>>
>>>
>>>
>>> David Coudron
>>>
>>>
>>>
>>>
>>>
>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Solorza
>>> *Sent:* Friday, February 9, 2018 9:42 PM
>>> *To:* Animal Farm <af@afmug.com>
>>> *Subject:* Re: [AFMUG] tying down wires
>>>
>>>
>>>
>>> We use these sometimes in enclosures to hold wires tied down with wire
>>> ties especially inside our cable management systems.   If required we also
>>> screw them into back panels. https://www.google.com/search?
>>> q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,p
>>> k100=shop=seller:100446302,rt:4,pgb:1,cid:2660621310
>>> 06318401,pid:7742393566737078290,oid:2629468581556939237,lsf
>>> qd:0=en-US=Iml-WuScE4LWtQXogoKgDA=gclid:CjwKCAiAq
>>> vXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKTH
>>> Jj7zJbApsFhoCzecQAvD_BwE
>>>
>>>
>>>
>>> On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>>>
>>> That's robbery
>>>
>>>
>>>
>>> -- Original Message --
>>>
>>> From: "Steve Jones" <thatoneguyst...@gmail.com>
>>>
>>> To: af@afmug.com
>>>
>>> Sent: 2/9/2018 8:59:11 PM
>>>
>>> Subject: Re: [AFMUG] tying down wires
>>>
>>>
>>>
>>> it works but they run 40 some bucks around here
>>>
>>>
>>>
>>> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net>
>>> wrote:
>>>
>>> I’ve been looking for a solution like this. Neat idea. One of our guys
>>> is basically trying to 3d print something like this
>>>
>>> Jon Langeler
>>>
>>> Michwave Technologies, Inc.
>>>
>>>
>>>
>>>
>>> On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
>>>
>>> I wonder if I put one of these in the box:
>>>
>>> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit
>>> -GBK14CS/100175627
>>>
>>>
>>>
>>> with the screws removed, if that would be a suitable thing to tie off
>>> cables coming into the box to?
>>>
>>>
>>>
>>>
>>>
>>> (not sure the image will come through)
>>>
>>>
>>>
>>>
>>

Re: [AFMUG] tying down wires

[Jaime Solorza]

We use them in our enclosures for yearshold up well

Jaime Solorza

On Feb 10, 2018 4:53 PM, "Jeremy" <jeremysmi...@gmail.com> wrote:

> I tried those once, and the adhesive failed in the Summer when the box got
> hot.  Granted, this was for another company before we were using fans.
> Have any of you been using them long-term?  How do they hold up over the
> years?
>
> On Sat, Feb 10, 2018 at 10:26 AM, David Coudron <
> david.coud...@advantenon.com> wrote:
>
>> We have started using these zip tie saddles as well inside our
>> cabinets.   What we like about them besides being cheap (10 cents apiece)
>> is that they have adhesive on the back for quick connection to
>> metal/plastic and a screw hole for attaching to more porous material.
>> Additionally you can run two zip ties through every one, which lets you
>> double layer the wires over the zip tie saddle.
>>
>>
>>
>> David Coudron
>>
>>
>>
>>
>>
>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Solorza
>> *Sent:* Friday, February 9, 2018 9:42 PM
>> *To:* Animal Farm <af@afmug.com>
>> *Subject:* Re: [AFMUG] tying down wires
>>
>>
>>
>> We use these sometimes in enclosures to hold wires tied down with wire
>> ties especially inside our cable management systems.   If required we also
>> screw them into back panels. https://www.google.com/search?
>> q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,p
>> k100=shop=seller:100446302,rt:4,pgb:1,cid:2660621310
>> 06318401,pid:7742393566737078290,oid:2629468581556939237,
>> lsfqd:0=en-US=Iml-WuScE4LWtQXogoKgDA=gclid:CjwKCA
>> iAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKT
>> HJj7zJbApsFhoCzecQAvD_BwE
>>
>>
>>
>> On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>>
>> That's robbery
>>
>>
>>
>> -- Original Message --
>>
>> From: "Steve Jones" <thatoneguyst...@gmail.com>
>>
>> To: af@afmug.com
>>
>> Sent: 2/9/2018 8:59:11 PM
>>
>> Subject: Re: [AFMUG] tying down wires
>>
>>
>>
>> it works but they run 40 some bucks around here
>>
>>
>>
>> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net>
>> wrote:
>>
>> I’ve been looking for a solution like this. Neat idea. One of our guys is
>> basically trying to 3d print something like this
>>
>> Jon Langeler
>>
>> Michwave Technologies, Inc.
>>
>>
>>
>>
>> On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
>>
>> I wonder if I put one of these in the box:
>>
>> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit
>> -GBK14CS/100175627
>>
>>
>>
>> with the screws removed, if that would be a suitable thing to tie off
>> cables coming into the box to?
>>
>>
>>
>>
>>
>> (not sure the image will come through)
>>
>>
>>
>>
>

Re: [AFMUG] tying down wires

[Jeremy]

I tried those once, and the adhesive failed in the Summer when the box got
hot.  Granted, this was for another company before we were using fans.
Have any of you been using them long-term?  How do they hold up over the
years?

On Sat, Feb 10, 2018 at 10:26 AM, David Coudron <
david.coud...@advantenon.com> wrote:

> We have started using these zip tie saddles as well inside our cabinets.
> What we like about them besides being cheap (10 cents apiece) is that they
> have adhesive on the back for quick connection to metal/plastic and a screw
> hole for attaching to more porous material.   Additionally you can run two
> zip ties through every one, which lets you double layer the wires over the
> zip tie saddle.
>
>
>
> David Coudron
>
>
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Solorza
> *Sent:* Friday, February 9, 2018 9:42 PM
> *To:* Animal Farm <af@afmug.com>
> *Subject:* Re: [AFMUG] tying down wires
>
>
>
> We use these sometimes in enclosures to hold wires tied down with wire
> ties especially inside our cable management systems.   If required we also
> screw them into back panels. https://www.google.com/search?
> q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,
> pk100=shop=seller:100446302,rt:4,pgb:1,cid:266062131006318401,pid:
> 7742393566737078290,oid:2629468581556939237,lsfqd:0=en-US=Iml-
> WuScE4LWtQXogoKgDA=gclid:CjwKCAiAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_
> gDij9Nb3iHaSoshDcm2nnKTHJj7zJbApsFhoCzecQAvD_BwE
>
>
>
> On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>
> That's robbery
>
>
>
> -- Original Message ------
>
> From: "Steve Jones" <thatoneguyst...@gmail.com>
>
> To: af@afmug.com
>
> Sent: 2/9/2018 8:59:11 PM
>
> Subject: Re: [AFMUG] tying down wires
>
>
>
> it works but they run 40 some bucks around here
>
>
>
> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net>
> wrote:
>
> I’ve been looking for a solution like this. Neat idea. One of our guys is
> basically trying to 3d print something like this
>
> Jon Langeler
>
> Michwave Technologies, Inc.
>
>
>
>
> On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
>
> I wonder if I put one of these in the box:
>
> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-
> Kit-GBK14CS/100175627
>
>
>
> with the screws removed, if that would be a suitable thing to tie off
> cables coming into the box to?
>
>
>
>
>
> (not sure the image will come through)
>
>
>
>

Re: [AFMUG] tying down wires

[Adam Moffett]

I stuck them on painted drywall once and they fell off the next day.  
Stuck them on a painted metal box 3 years ago and they're still there.  
Adhesive performance definitely varies by surface, so I do back them up 
with a screw wherever that's feasible.


Anyway on the original topic we've circled back to just providing a 
place for zip ties, which is what Chuck is already doing.

The panduit catalog does have some interesting options though.


-- Original Message --
From: "David Coudron" <david.coud...@advantenon.com>
To: "af@afmug.com" <af@afmug.com>
Sent: 2/10/2018 12:26:49 PM
Subject: Re: [AFMUG] tying down wires

We have started using these zip tie saddles as well inside our 
cabinets.   What we like about them besides being cheap (10 cents 
apiece) is that they have adhesive on the back for quick connection to 
metal/plastic and a screw hole for attaching to more porous material.   
Additionally you can run two zip ties through every one, which lets you 
double layer the wires over the zip tie saddle.




David Coudron





From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza
Sent: Friday, February 9, 2018 9:42 PM
To: Animal Farm <af@afmug.com>
Subject: Re: [AFMUG] tying down wires



We use these sometimes in enclosures to hold wires tied down with wire 
ties especially inside our cable management systems.   If required we 
also screw them into back panels. 
https://www.google.com/search?q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,pk100=shop=seller:100446302,rt:4,pgb:1,cid:266062131006318401,pid:7742393566737078290,oid:2629468581556939237,lsfqd:0=en-US=Iml-WuScE4LWtQXogoKgDA=gclid:CjwKCAiAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKTHJj7zJbApsFhoCzecQAvD_BwE 
<https://www.google.com/search?q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,pk100=shop=seller:100446302,rt:4,pgb:1,cid:266062131006318401,pid:7742393566737078290,oid:2629468581556939237,lsfqd:0=en-US=Iml-WuScE4LWtQXogoKgDA=gclid:CjwKCAiAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKTHJj7zJbApsFhoCzecQAvD_BwE>




On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:


That's robbery



-- Original Message --

From: "Steve Jones" <thatoneguyst...@gmail.com>

To: af@afmug.com

Sent: 2/9/2018 8:59:11 PM

Subject: Re: [AFMUG] tying down wires




it works but they run 40 some bucks around here



On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler 
<jon-ispli...@michwave.net> wrote:


I’ve been looking for a solution like this. Neat idea. One of our 
guys is basically trying to 3d print something like this


Jon Langeler

Michwave Technologies, Inc.




On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> 
wrote:



I wonder if I put one of these in the box:

https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627



with the screws removed, if that would be a suitable thing to tie 
off cables coming into the box to?






(not sure the image will come through)

Re: [AFMUG] tying down wires

[David Coudron]

We have started using these zip tie saddles as well inside our cabinets.   What 
we like about them besides being cheap (10 cents apiece) is that they have 
adhesive on the back for quick connection to metal/plastic and a screw hole for 
attaching to more porous material.   Additionally you can run two zip ties 
through every one, which lets you double layer the wires over the zip tie 
saddle.

David Coudron


From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza
Sent: Friday, February 9, 2018 9:42 PM
To: Animal Farm <af@afmug.com>
Subject: Re: [AFMUG] tying down wires

We use these sometimes in enclosures to hold wires tied down with wire ties 
especially inside our cable management systems.   If required we also screw 
them into back panels. 
https://www.google.com/search?q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,pk100=shop=seller:100446302,rt:4,pgb:1,cid:266062131006318401,pid:7742393566737078290,oid:2629468581556939237,lsfqd:0=en-US=Iml-WuScE4LWtQXogoKgDA=gclid:CjwKCAiAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKTHJj7zJbApsFhoCzecQAvD_BwE

On Feb 9, 2018 8:17 PM, "Adam Moffett" 
<dmmoff...@gmail.com<mailto:dmmoff...@gmail.com>> wrote:
That's robbery

-- Original Message --
From: "Steve Jones" 
<thatoneguyst...@gmail.com<mailto:thatoneguyst...@gmail.com>>
To: af@afmug.com<mailto:af@afmug.com>
Sent: 2/9/2018 8:59:11 PM
Subject: Re: [AFMUG] tying down wires

it works but they run 40 some bucks around here

On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler 
<jon-ispli...@michwave.net<mailto:jon-ispli...@michwave.net>> wrote:
I’ve been looking for a solution like this. Neat idea. One of our guys is 
basically trying to 3d print something like this
Jon Langeler
Michwave Technologies, Inc.


On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> 
<ch...@wbmfg.com<mailto:ch...@wbmfg.com>> wrote:
I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off cables 
coming into the box to?


(not sure the image will come through)
[https://images.homedepot-static.com/productImages/c499dbbc-3ac5-4ed2-9c3a-fd0aa87aba9d/svn/eaton-grounding-bars-gbk14cs-64_1000.jpg]

Re: [AFMUG] tying down wires

[Chuck McCown]

I think I spent $4 at Home Depot yesterday for one to play with.  

From: Steve Jones 
Sent: Friday, February 09, 2018 6:59 PM
To: af@afmug.com 
Subject: Re: [AFMUG] tying down wires

it works but they run 40 some bucks around here

On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net> wrote:

  I’ve been looking for a solution like this. Neat idea. One of our guys is 
basically trying to 3d print something like this 


  Jon Langeler
  Michwave Technologies, Inc.


  On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:


I wonder if I put one of these in the box:

https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off 
cables coming into the box to?


(not sure the image will come through)

Re: [AFMUG] tying down wires

[Jaime Solorza]

These as well.

https://www.panduit.com/en/products/wire-routing-management-protection/cable-wire-ties-mounts-straps.html
Jaime Solorza

On Feb 9, 2018 8:42 PM, "Jaime Solorza" <losguyswirel...@gmail.com> wrote:

> We use these sometimes in enclosures to hold wires tied down with wire
> ties especially inside our cable management systems.   If required we also
> screw them into back panels. https://www.google.com/search?
> q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,
> pk100=shop=seller:100446302,rt:4,pgb:1,cid:266062131006318401,pid:
> 7742393566737078290,oid:2629468581556939237,lsfqd:0=en-US=Iml-
> WuScE4LWtQXogoKgDA=gclid:CjwKCAiAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_
> gDij9Nb3iHaSoshDcm2nnKTHJj7zJbApsFhoCzecQAvD_BwE
>
> On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:
>
>> That's robbery
>>
>> -- Original Message --
>> From: "Steve Jones" <thatoneguyst...@gmail.com>
>> To: af@afmug.com
>> Sent: 2/9/2018 8:59:11 PM
>> Subject: Re: [AFMUG] tying down wires
>>
>> it works but they run 40 some bucks around here
>>
>> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net>
>> wrote:
>>
>>> I’ve been looking for a solution like this. Neat idea. One of our guys
>>> is basically trying to 3d print something like this
>>>
>>> Jon Langeler
>>> Michwave Technologies, Inc.
>>>
>>>
>>> On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
>>>
>>> I wonder if I put one of these in the box:
>>> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit
>>> -GBK14CS/100175627
>>>
>>> with the screws removed, if that would be a suitable thing to tie off
>>> cables coming into the box to?
>>>
>>>
>>> (not sure the image will come through)
>>>
>>>
>>

Re: [AFMUG] tying down wires

[Jaime Solorza]

We use these sometimes in enclosures to hold wires tied down with wire ties
especially inside our cable management systems.   If required we also screw
them into back panels.
https://www.google.com/search?q=panduit+sgabm25-at-c0+cable+tie+mounting+pad,4-way,black,pk100=shop=seller:100446302,rt:4,pgb:1,cid:266062131006318401,pid:7742393566737078290,oid:2629468581556939237,lsfqd:0=en-US=Iml-WuScE4LWtQXogoKgDA=gclid:CjwKCAiAqvXTBRBuEiwAE54dcGGbbJ9XpYXx-eZnn5_gDij9Nb3iHaSoshDcm2nnKTHJj7zJbApsFhoCzecQAvD_BwE

On Feb 9, 2018 8:17 PM, "Adam Moffett" <dmmoff...@gmail.com> wrote:

> That's robbery
>
> -- Original Message --
> From: "Steve Jones" <thatoneguyst...@gmail.com>
> To: af@afmug.com
> Sent: 2/9/2018 8:59:11 PM
> Subject: Re: [AFMUG] tying down wires
>
> it works but they run 40 some bucks around here
>
> On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler <jon-ispli...@michwave.net>
> wrote:
>
>> I’ve been looking for a solution like this. Neat idea. One of our guys is
>> basically trying to 3d print something like this
>>
>> Jon Langeler
>> Michwave Technologies, Inc.
>>
>>
>> On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:
>>
>> I wonder if I put one of these in the box:
>> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit
>> -GBK14CS/100175627
>>
>> with the screws removed, if that would be a suitable thing to tie off
>> cables coming into the box to?
>>
>>
>> (not sure the image will come through)
>>
>>
>

Re: [AFMUG] tying down wires

[Adam Moffett]

That's robbery

-- Original Message --
From: "Steve Jones" <thatoneguyst...@gmail.com>
To: af@afmug.com
Sent: 2/9/2018 8:59:11 PM
Subject: Re: [AFMUG] tying down wires


it works but they run 40 some bucks around here

On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler 
<jon-ispli...@michwave.net> wrote:
I’ve been looking for a solution like this. Neat idea. One of our guys 
is basically trying to 3d print something like this


Jon Langeler
Michwave Technologies, Inc.


On Feb 9, 2018, at 6:10 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote:


I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627 
<https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627>


with the screws removed, if that would be a suitable thing to tie off 
cables coming into the box to?



(not sure the image will come through)

Re: [AFMUG] tying down wires

[Steve Jones]

it works but they run 40 some bucks around here

On Fri, Feb 9, 2018 at 6:47 PM, Jon Langeler 
wrote:

> I’ve been looking for a solution like this. Neat idea. One of our guys is
> basically trying to 3d print something like this
>
> Jon Langeler
> Michwave Technologies, Inc.
>
>
> On Feb 9, 2018, at 6:10 PM,   wrote:
>
> I wonder if I put one of these in the box:
> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-
> Kit-GBK14CS/100175627
>
> with the screws removed, if that would be a suitable thing to tie off
> cables coming into the box to?
>
>
> (not sure the image will come through)
>
>

Re: [AFMUG] tying down wires

[Jon Langeler]

I’ve been looking for a solution like this. Neat idea. One of our guys is 
basically trying to 3d print something like this 

Jon Langeler
Michwave Technologies, Inc.


> On Feb 9, 2018, at 6:10 PM,   wrote:
> 
> I wonder if I put one of these in the box:
> https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627
>  
> with the screws removed, if that would be a suitable thing to tie off cables 
> coming into the box to?
>  
>  
> (not sure the image will come through)

Re: [AFMUG] tying down wires

[Adam Moffett]

If someone gets overzealous they can crush their wire flat.  It 
definitely ain't coming out though.



-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:17:28 PM
Subject: Re: [AFMUG] tying down wires

Or leave the screws.  Space it off the back of the box such that the 
holes line up with the connectors on the PCB.

Use the screws to clamp the wires.

From:Adam Moffett
Sent: Friday, February 9, 2018 4:15 PM
To:af@afmug.com
Subject: Re: [AFMUG] tying down wires


Someone who knows what it is might try grounding with it.  And they'll 
complain you didn't include the screws.




-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:10:38 PM
Subject: [AFMUG] tying down wires


I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off 
cables coming into the box to?



(not sure the image will come through)

Re: [AFMUG] tying down wires

[chuck]

Or leave the screws.  Space it off the back of the box such that the holes line 
up with the connectors on the PCB.
Use the screws to clamp the wires.  

From: Adam Moffett 
Sent: Friday, February 9, 2018 4:15 PM
To: af@afmug.com 
Subject: Re: [AFMUG] tying down wires


Someone who knows what it is might try grounding with it.  And they'll complain 
you didn't include the screws.



-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:10:38 PM
Subject: [AFMUG] tying down wires

  I wonder if I put one of these in the box:
  https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

  with the screws removed, if that would be a suitable thing to tie off cables 
coming into the box to?


  (not sure the image will come through)

Re: [AFMUG] tying down wires

[chuck]

That is because it is a floating ground...

From: Adam Moffett 
Sent: Friday, February 9, 2018 4:15 PM
To: af@afmug.com 
Subject: Re: [AFMUG] tying down wires


Someone who knows what it is might try grounding with it.  And they'll complain 
you didn't include the screws.



-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:10:38 PM
Subject: [AFMUG] tying down wires

  I wonder if I put one of these in the box:
  https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

  with the screws removed, if that would be a suitable thing to tie off cables 
coming into the box to?


  (not sure the image will come through)

Re: [AFMUG] tying down wires

[Adam Moffett]

Someone who knows what it is might try grounding with it.  And they'll 
complain you didn't include the screws.




-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:10:38 PM
Subject: [AFMUG] tying down wires


I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off 
cables coming into the box to?



(not sure the image will come through)

Re: [AFMUG] tying down wires

[Adam Moffett]

Hahaha, a creative solution



-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:10:38 PM
Subject: [AFMUG] tying down wires


I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off 
cables coming into the box to?



(not sure the image will come through)

[AFMUG] tying down wires

[chuck]

I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off cables 
coming into the box to?


(not sure the image will come through)