[AFMUG] 3,000 Watt 120 volt UPS for external batteries only...

Does anyone know of a 120 Volt 3,000 watt (or close, 2,700 watts or more is needed) UPS that comes with no batteries where we can add a string of 155AH batteries (Preferably a 48 Volt DC UPS so we can add 4 batteries). -- AF mailing list AF@af.afmug.com

[AFMUG] Tower Fiber

Someone suggested I run a MTP cable up the tower and use MTP-to-LC cassettes at the top and bottom. However I have not been able to find an outdoor MTP solution (sealed outdoor box) that could be used at the top of a tower. Suggestions / suppliers? Anybody used something like this?

Re: [AFMUG] Mikrotik stuff

Which meanwells? -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Mitch Koep Sent: Wednesday, August 1, 2018 5:07 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Mikrotik stuff Does anyone still use Mikrotik boards? I am taking down a WSIP that went

Re: [AFMUG] Tower Fiber

Hi Adam Telrad show two transceivers for Compacts on their Zendesk site.I think this one is Single mode. Finisar FTLF1321P1xTL I have asked FS.com if they have a compatible module. Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Adam Moffett Sent:

[AFMUG] Powering Mikrotik CCR from DC

Is anyone powering Mikrotik CCR routers from DC. It looks like if you pull the included AC PSU it feeds the Tik with 24volt DC. So can we just remove the supply and feed the tik from a 24v DC supply? Anyone doing this? Anyone know what the make / model of plug on the PSU? -- AF mailing

[AFMUG] Eltek "J Series" -48v DC Power Systems

Thinking of using some of these to make DC sites. Eltek "J Series" -48v DC Power Systems Anyone using these? Care to share how you are wiring things as these are -48v. I plan to power; A Netonix switch (would I have to use the special -48v version?) for Cambium APs A Mikrotik CCR

Re: [AFMUG] Powering Mikrotik CCR from DC

I have done this with several CCR models. On 10/26/2018 6:27 PM, SmarterBroadband wrote: Just ordered a couple of RSD-100C-24 to test…. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Mathew Howard Sent: Friday, October 26, 2018 4:09 PM To: AFMUG <mailto:af@af.afmug.com>

Re: [AFMUG] Eltek "J Series" -48v DC Power Systems

] Eltek "J Series" -48v DC Power Systems We use tons of them.. big sites go with a Netonix IDC, smaller sites use 12 port Netonix + Meanwell RSD DC-DC For direct connect we use McCownTech APC/POE injectors From: AF mailto:af-boun...@af.afmug.com> > on behalf of

Re: [AFMUG] Powering Mikrotik CCR from DC

t some assurance that’s true, I wouldn’t risk it. From: AF mailto:af-boun...@af.afmug.com> > On Behalf Of SmarterBroadband Sent: Friday, October 26, 2018 4:08 PM To: 'AnimalFarm Microwave Users Group' mailto:af@af.afmug.com> > Subject: Re: [AFMUG] Powering Mikrotik CCR from DC

Re: [AFMUG] Powering Mikrotik CCR from DC

ower wire and mark a + on the white plug with a sharpie. I leave the AC brick in their with the DC side cut off and taped up. My thinking is that if I had to I could reconnect the AC brick. -Adam On 10/26/2018 3:04 PM, SmarterBroadband wrote: Is anyone powering Mikrotik CCR routers from D

Re: [AFMUG] Powering Mikrotik CCR from DC

-boun...@af.afmug.com> > On Behalf Of SmarterBroadband Sent: Friday, October 26, 2018 4:08 PM To: 'AnimalFarm Microwave Users Group' mailto:af@af.afmug.com> > Subject: Re: [AFMUG] Powering Mikrotik CCR from DC We already have 1016 and 1032 at all our sites. Therefore I would like

Re: [AFMUG] bandwidth management appliance opinions

Regarding Procera. I am looking for a Procera Expert / Consultant to help get our Procera boxes doing great things for us. Does anyone know of someone? Thanks Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ken Hohhof Sent: Monday, November 12, 2018 6:51 PM

[AFMUG] Cable Systems

We have an opportunity to acquire usage rights to a cable system that supplies 300 plus mobile homes. We plan to just inject internet (no TV). There will be no head end equipment provided to us (currently off site at the cable companies office), therefore just the cable in the ground and the

Re: [AFMUG] Paying employees per install/service call

] Paying employees per install/service call and if they DON'T do the additional steps you asked for, they just don't get paid the bonus? what percentage go the extra mile for the bonus? - Original Message - From: SmarterBroadband <mailto:li...@sbb.net> To: 'AnimalFarm Mic

Re: [AFMUG] OT Being lazy

Chuck I use these. https://www.amazon.com/dp/B00X4O6GRK?aaxitk=HsFrre9j0O.VoWtRPlvUUQ

[AFMUG] Fiber up the tower

What are people using for Fiber up the tower? We are looking for Single mode 4 strand - 2 LC Duplex at each end. 140 foot lengths. They will be run up inside a monopole. Are you using armored? Outdoor? What? Where are people getting theirs made? Thanks Adam -- AF

Re: [AFMUG] Fiber up the tower

the tower I've been getting mine custom made from Fiber Store. Only problem is about a 30 day lead time. https://www.fs.com/products/29606.html Used it on several sites and haven't had a problem with it. Nate On 12/20/2018 2:02 PM, SmarterBroadband wrote: What are people using for Fiber

Re: [AFMUG] Fiber up the tower

feel flimsy like the UBNT "tough fiber". We've run them vertically on 100'+ grain legs without a problem. I put pulling eyes on both ends just to help with installation, helps protect the ends as you unspool. On 12/20/2018 2:10 PM, SmarterBroadband wrote: Hi Nate We a

Re: [AFMUG] Local Generator

I second the Honda 1000 and 2000 inverter generators. Also suggest you convert to propane using a https://www.motorsnorkel.com/ We had ours done by them many years ago, I believe with the new snorkel it is very easy to DIY. They run a long time on a BBQ sized tank, you can use a

Re: [AFMUG] Local Generator

before the fuel bottle. But even if its just the same, it's a win hauling/connecting propane vs. gas... Robert On 11/27/2018 10:22 AM, SmarterBroadband wrote: > I second the Honda 1000 and 2000 inverter generators. > > Also suggest you convert to propane using a

Re: [AFMUG] Eltek Valere J series -48 or +48

Not sure that is true with the J series? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of ch...@wbmfg.com Sent: Monday, November 26, 2018 2:56 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Eltek Valere J series -48 or +48 It is 48. Period. You choose the reference

[AFMUG] Optical SFPs

I am going to go fiber on my next tower. Is anyone buying compatible SFPs from fs.com or fluxlight.com for any of the following? Cambium 450M Telrad Compact 1000 Ceragon IP-20C Mikrotik If yes, what make and part numbers? Thanks Adam -- AF mailing list AF@af.afmug.com

Re: [AFMUG] 48v Power Supply Switches

Ken How many AH of battery do you hang off one of these units? Battery connections look very small… Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ken Hohhof Sent: Friday, November 23, 2018 1:35 PM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] 48v Power

[AFMUG] Fiber deployment relative cost

Need a quick relative cost of underground versus aerial deployment in a foothills area where there is a lot of granite so will need a high percentage of boring. Would aerial cost likely be 50% of underground? 40%. 30%??? -- AF mailing list AF@af.afmug.com

Re: [AFMUG] Paying employees per install/service call

We do this. Hourly rate is higher ($10 would not meet minimum wage in California…) and we pay a $35 bonus for each install if it meets our criterial. Installer has to take pictures of the installation location, the view the radio sees, radio Asset Tag, wire run, wall penetration and POE

Re: [AFMUG] International cell phone use

I have ATT and do the $10 a day thing. It then uses whatever plan you have in the USA for calls and data. I like to have a working phone and data. Make calls, send texts, use nav, all easy and no worries. Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf

Re: [AFMUG] International cell phone use

Mark, you can do $10 a day for the convenience Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Mark - Myakka Technologies Sent: Thursday, January 24, 2019 1:49 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] International cell phone use Bill, Yeah, that's

Re: [AFMUG] New server SSD vs HDD

I think PRO drives have many more writes. Talking Samsung…. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Bill Prince Sent: Thursday, January 24, 2019 9:59 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] New server SSD vs HDD The only issue with SSDs is the

Re: [AFMUG] Fw: Fair warning

Song in Text form….. Customer: Morning, Waitress: Morning. Customer: What have you got? Waitress: Well, there's egg and bacon, Egg sausage and bacon Egg and spam Egg, bacon and spam Egg, bacon, sausage and spam Spam, bacon, sausage and spam Spam, egg, spam, spam, bacon and spam Spam,

Re: [AFMUG] OT: Tax cut my ass...

I am expecting the same. Nice to know he will make millions this year because of his tax cuts!!! Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Bill Prince Sent: Friday, March 29, 2019 11:25 AM To: AFMUG Subject: [AFMUG] OT: Tax cut my ass... Just got my completed

Re: [AFMUG] Exalt Wireless Support

We have found the complete opposite. We have 10 Exalt Extreme Air 11 and 18GHz XPIC links and they have been trouble free. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Colin Stanners Sent: Wednesday, February 6, 2019 9:19 AM To: AnimalFarm Microwave Users Group Subject:

Re: [AFMUG] 450M POE

Netonix do a 80W POE. NPOE-54V-80W Would that work? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Carl Peterson Sent: Friday, February 8, 2019 12:06 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] 450M POE I know we have covered this a few times. Will the

[AFMUG] Procera

Anyone doing shaping with Procera boxes? We are new to Procera and looking for ideas, knowledge (help) with how we can shape traffic to improve network performance and customer perception. Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Watchdog Device

at replacing them but you can only have so many failures to deal with... Robert On 01/30/2019 12:44 PM, SmarterBroadband wrote: > Digital Loggers Pro Switch does that for 8 sockets, and you get 8 > sockets to control remotely. > > https://www.digital-loggers.com/lpc.html > > Adam

Re: [AFMUG] Thanks for the Memories Chuck Mccown!

I think that is Paul and I in the center… Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of CBB - Jay Fuller Sent: Friday, February 1, 2019 5:52 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Thanks for the Memories Chuck Mccown! Here's another angle. Facebook

Re: [AFMUG] I did it

 -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of ch...@wbmfg.com Sent: Wednesday, January 23, 2019 4:39 PM To: af@af.afmug.com Subject: [AFMUG] I did it This is the mini computer I selected for my splicing trailer. Boots to the login screen in about 15

Re: [AFMUG] connectorized 450 SM replacement

I have over 100 new connectorized 450 SM on the shelf. Do you want to buy some? Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ken Hohhof Sent: Tuesday, June 4, 2019 11:03 AM To: 'AnimalFarm Microwave Users Group' Subject: [AFMUG] connectorized 450 SM replacement Has

[AFMUG] Telrad Compact 1000

Hi I am looking for some used Telrad Compact 1000 3.65MHz LTE eNB. Anyone have any to sell? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Gloat

And no repairs needed…. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve Jones Sent: Friday, May 31, 2019 3:35 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT Gloat I got cat butts on ebay On Fri, May 31, 2019, 3:00 PM Forrest Christian (List Account)

[AFMUG] AirFiber24 repair

I have a couple of AirFiber24s that need repair. Anyone doing this? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] uptime monitoring

Multiping is great for this. www.multiping.com Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Chuck McCown Sent: Thursday, June 20, 2019 9:43 AM To: af@af.afmug.com Subject: [AFMUG] uptime monitoring I am at the mercy of another service

Re: [AFMUG] [ External ] Re: When to consider 450M?

I have new connectorized….. You want? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Mark Radabaugh Sent: Friday, June 21, 2019 1:24 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] [ External ] Re: When to consider 450M? We are running out of 450D’s and are still

[AFMUG] Antenna Aligner

Thinking of getting an Antenna Aligner for Sector and Dish alignment. Choices seem to be Multiwave Smart Aligner 3Z Telecom RF Vision Sunsight Anyone have experience of any of these? Thanks Adam -- AF mailing list AF@af.afmug.com

Re: [AFMUG] Mikrotik Fiber SFP+

Which one? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Richard Strittmatter Sent: Thursday, May 9, 2019 10:01 AM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] Mikrotik Fiber SFP+ Fs.com From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of SmarterBroadband

[AFMUG] Mikrotik Fiber SFP+

Hi We are using CCR 1036-8G-2S+, what Single Mode LR Fiber 10G SFP+ compatible modules are you using successfully? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Antenna Aligner

s://atheral.com/> Daniel White Co-Founder - Business Development & Operations direct: +1 (702) 470-2766 <https://www.facebook.com/getatheral> <https://www.linkedin.com/company/atheral/> <https://www.youtube.com/channel/UCpPZv-EsGCj8LXfzylwCrjQ> SmarterBro

[AFMUG] Ceragon IP-20C SFP

I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. Can anyone list the steps to get this working? Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] Ceragon IP-20C

What is the latest stable firmware people are running on these in 11 and 18GHz? Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Ceragon IP-20C SFP

the System tab or something on top of the tree, don't have one handy to look. On Tue, May 14, 2019 at 12:49 PM SmarterBroadband wrote: > > I am trying to get a fiber SFP working in my IP-20C. I am licensed for two GbE ports. I must be missing something. > > > > Can anyone lis

Re: [AFMUG] Ceragon IP-20C SFP

you will have to provision a service on them for it to pass traffic. > > On 5/14/2019 1:46 PM, SmarterBroadband wrote: >> Hi Caleb >> >> Yes, done that. Admin status is up. Operational status is Down >> >> What else do I need? Ethernet Services? Service Points?

Re: [AFMUG] ePMP 3000 backwards compatibility

I reached out to Cambium. I asked about 4.3.2 on all combinations. They replied; with the exception of F200 to 1000 or 2000 AP – you will not have QoS. For F200 to 1000 or 2000 you will have QoS. Here are some comments I received from our engineer: Force 300 to 1000 or 2000 AP - No

Re: [AFMUG] ePMP 3000 backwards compatibility

Are you saying Force 200 to a 2000AP both on latest firmware will lose QOS? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Mathew Howard Sent: Monday, May 20, 2019 11:21 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] ePMP 3000 backwards compatibility Not if you're

Re: [AFMUG] ePMP 3000 backwards compatibility

. I'm ready to do some testing. On Mon, May 20, 2019 at 4:29 PM SmarterBroadband mailto:li...@sbb.net> > wrote: Are you saying Force 200 to a 2000AP both on latest firmware will lose QOS? From: AF [mailto:af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> ] On Behalf Of M

Re: [AFMUG] 500 foot shot

they did replace for > free, and as I understand it, the 1 gig radios have since been redesigned, > but we've had two of the 2.5Gbps links up for close to two years with no real > problems. The Mikrotik 60ghz radios seem to work pretty well too. > > On Mon, Apr 29, 2019 at 4:15 PM Smarter

Re: [AFMUG] micropop/small cell customer agreements

done From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve Jones Sent: Wednesday, May 1, 2019 7:55 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] micropop/small cell customer agreements can i peek too? On Mon, Apr 29, 2019 at 4:07 PM SmarterBroadband mailto:li

Re: [AFMUG] micropop/small cell customer agreements

Sent. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Graham McIntire Sent: Thursday, April 25, 2019 10:18 AM To: af@af.afmug.com Subject: [AFMUG] micropop/small cell customer agreements Does anyone have an example of an agreement/contract you have with

Re: [AFMUG] Kellems support grips for Cat5 cables

We just purchased these lace-up grips so we do not have to slide them down the drop. Not used them yet. https://www.sitepro1.com/store/cart.php?m=sp_search_results =lace-up From: AF [mailto:af-boun...@af.afmug.com]

Re: [AFMUG] micropop/small cell customer agreements

, Apr 26, 2019 at 4:00 PM SmarterBroadband mailto:li...@sbb.net> > wrote: Sent. -Original Message- From: AF [mailto:af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> ] On Behalf Of Graham McIntire Sent: Thursday, April 25, 2019 10:18 AM To: af@af.afmug.com <mailto:

Re: [AFMUG] Inexpensive Surveillance Cameras

How long do the batteries actually last? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Sean Heskett Sent: Friday, April 26, 2019 3:43 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Inexpensive Surveillance Cameras I installed the Blink cameras at my place and have

Re: [AFMUG] Kellems support grips for Cat5 cables

=c8uwFu1bTbA From: SmarterBroadband Sent: Monday, April 29, 2019 10:44 AM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] Kellems support grips for Cat5 cables We just purchased these lace-up grips so we do not have to slide them down the drop. Not used them yet. https

Re: [AFMUG] 900mhz stingers still available?

I have used Stingers and 13 and 17 yagi. Email me if interested. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Kurt Fankhauser Sent: Monday, April 29, 2019 12:43 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] 900mhz stingers still available? does anyone know

Re: [AFMUG] micropop/small cell customer agreements

if they move out or the house burns down :) On 4/26/19 4:59 PM, SmarterBroadband wrote: Sent. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Graham McIntire Sent: Thursday, April 25, 2019 10:18 AM To: af@af.afmug.com <mailto:af@af.afmug.com> Subject:

[AFMUG] 500 foot shot

We need to put up a 100Meg link for our county. Possible they may eventually need 500Meg. Is the IgniteNet 60Ghz solid and ready for prime time? I would use AF24 but this link is about 4 degrees off an existing AF24 link!!! Could use Siklu but don't see using it anywhere else so would need

[AFMUG] LightPointe

Just received a flyer from LightPointe in the post. Has anyone tried / used LightPointe? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] AirFiber24 repair

g have changed since then. https://store.ui.com/search?mockup=airfiber+repair <https://store.ui.com/search?mockup=airfiber+repair=airfiber+repair*> =airfiber+repair* On 6/24/2019 6:10 PM, SmarterBroadband wrote: I have a couple of AirFiber24s that need repair. Anyone doing this

Re: [AFMUG] OT Label Printer

I am happy with our Asset Tags if you need a supplier. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ken Hohhof Sent: Wednesday, July 10, 2019 9:17 AM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] OT Label Printer Nice. Now you can print "Warning 1,000,000 Ohms"

Re: [AFMUG] 12A100FT Battery

Where can we get LifePO4 prismatic cells for less? And what is a 16s bms? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of TJ Trout Sent: Tuesday, July 2, 2019 1:08 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] 12A100FT Battery 100ft red only ~$210 ea, buy 4 new.

Re: [AFMUG] AirFiber24 repair

had to go through support to verify the broken radios before it let me purchase it from the store. They gave me a special code to use at the store. Nate On 6/26/2019 4:48 PM, SmarterBroadband wrote: Followed the link and it says "Sold Out"... From: AF [mailto:af-boun...@af

Re: [AFMUG] OT Remote Control

: SmarterBroadband Sent: Wednesday, October 2, 2019 1:54 PM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] OT Remote Control Like this? https://www.amazon.com/Yosoo-110-240V-Wireless-Controller-Security/dp/B07GCMNYV9/ref=sr_1_11?keywords=gsm+remote+switch <ht

Re: [AFMUG] OT Remote Control

Like this? https://www.amazon.com/Yosoo-110-240V-Wireless-Controller-Security/dp/B07GCMNYV9/ref=sr_1_11?keywords=gsm+remote+switch =1570046016=8-11

[AFMUG] Replacement Telrad CPE9000 and 12000 POE

Has anyone found a source of replacement POE's for Telrad CPE9000 and 12000. Thanks Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT dinner time

Hi Chuck If you can, visit The Verdon Gorge and Moustiers-Sainte-Marie while you are on you way South. We just discovered this area earlier this year. Well worth a visit. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of ch...@wbmfg.com Sent: Monday, October 21, 2019

Re: [AFMUG] Cost effective Frequency Coordination ???

Liz at Intelpath. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Paul McCall Sent: Wednesday, October 23, 2019 5:13 AM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Cost effective Frequency Coordination ??? I have 4 or 5 licensed backhaul links to get coordinated .

Re: [AFMUG] 450SMs

Hi Adam I have over 100 new 450 Connectorized SM Uncapped. Plus same number of MTI 23 dBi panels. Make me an offer if interested. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Adam Moffett Sent: Wednesday, October 23, 2019 8:04 AM To: af@af.afmug.com

Re: [AFMUG] Generator for office

These are 12Kw and look to be smaller than the Generac? https://www.nationwidegenerators.com/briggs-stratton-40517-12kw-generator/ https://www.nationwidegenerators.com/kohler-12resv-120-240v-1ph-generator-with-oncue-generator-management-system/ From: AF

Re: [AFMUG] managed routers and parental controls

I use Plume at home. Did you make a deal with them to be a reseller? Any info you can share would be appreciated. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Carl Peterson Sent: Tuesday, January 28, 2020 10:08 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG]

Re: [AFMUG] Advice on spending

We have one. Very happy we purchased it. Going to be great with CBRS eNodeB alignments and registration. We use on dish alignments and it works really well. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve Jones Sent: Wednesday, February 19, 2020 8:50 AM To:

Re: [AFMUG] 3GHz with no CBRS

I hope so. I will have 900 Telrad CPE7000 to sell…… From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Gino A. Villarini Sent: Tuesday, February 11, 2020 4:21 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] 3GHz with no CBRS I would think so, CBRS is a USA thing…

Re: [AFMUG] 3.86 link

Depending where you are a AF24HD could keep 300 meg at a few 9's. No licenses to get. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Andy Trimmell Sent: Friday, January 17, 2020 10:38 AM To: af@af.afmug.com Subject: [AFMUG] 3.86 link Any suggestions for 3.86 miles and not in the

[AFMUG] Licensed radios

Hi The BridgeWave Navigator states it can have more than 2x80 channels on one dual core radio, however the extra channels have to be adjacent. Do any other vendors do this in 11 and 18GHz Today (no vaporware).And do any have non-adjacent channels? Thanks Adam -- AF mailing

Re: [AFMUG] Smart Antenna Alignment review?

Hi Tushar We have one. Works well. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Tushar Patel Sent: Tuesday, April 7, 2020 3:41 PM To: 'AnimalFarm Microwave Users Group' Subject: [AFMUG] Smart Antenna Alignment review? Time has come for us to get a little more

Re: [AFMUG] Fiber Up Tower

That is a thing of beauty…. Let us know the price when you find out…. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Kurt Fankhauser Sent: Friday, April 3, 2020 10:48 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Fiber Up Tower Anyone look at this Hybrid

[AFMUG] 5.9

So 33 companies have STAs from the FCC to use 45MHz of the 5.9 band to increase bandwidth during the Covid crisis. What gear will support this? 450? ePMP? Adam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Fiber Up Tower

Just purchased some, arrived yesterday, plan to install on a Licensed Link install next week. I will let you know how it goes. Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Matt Sent: Wednesday, April 1, 2020 7:58 AM To: af@af.afmug.com Subject: Re:

Re: [AFMUG] Fiber Up Tower

How many strands are in one cable? From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Nate Burke Sent: Monday, March 30, 2020 6:04 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Fiber Up Tower I've been using the Cabmium Fiber cables. They're a little expensive, but

[AFMUG] Verizon WiFi Calling on Telrad LTE

Customers with a Verizon cell phone using WiFi calling are unable to get calls in or out on our Telrad LTE network. Anyone else come across this problem? Ideas? Fix? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Verizon WiFi Calling on Telrad LTE

7-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Apr 28, 2020 at 3:16 PM Bill Prince mailto:part15...@gmail.com> > wrote: In my experience, Verizon WiFi calling gets broken from (1) Double NAT, and (2) fragmented packets. bp On 4/28/2020 11:53 AM,

Re: [AFMUG] billing

I have two BMUs on the shelf if you need some…… From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve Jones Sent: Wednesday, April 22, 2020 5:16 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] billing BMUs are gone, you can use mikrotik, but they wont give you a

[AFMUG] Saisei

Anyone using Saisei? Pros cons? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] CNHeat

I would love to give it a go. But the pricing model of per site does not work for us. We have to have many small sites because of hills and trees , over 90 currently. I can see if you had a few mega sites it could make sense. From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Steve

Re: [AFMUG] CNHeat

. But they're hard to keep watered. On Tue, Mar 24, 2020, 6:50 PM SmarterBroadband mailto:li...@sbb.net> > wrote: I would love to give it a go. But the pricing model of per site does not work for us. We have to have many small sites because of hills and trees , over 90 currently.

Re: [AFMUG] WiFi Calling Broken

We have. Verizon. We thought it was because we had upgraded our WiMAX to LTE. Maybe not then. Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Jeremy Grip Sent: Friday, May 15, 2020 2:35 PM To: 'AnimalFarm Microwave Users Group' Subject: [AFMUG]

Re: [AFMUG] TV White Space

We use the Dual Pol Yagis on APs to get a narrower beam. Not 10 degrees but better than a 60 or 90 sector and smaller. Also better gain to suck in a signal. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of David Coudron Sent: Wednesday, September 9, 2020 9:20 AM To:

Re: [AFMUG] OT: Jay Fuller turns 50 today?

I had my Beatles Song Birthday last week. ☹ Adam -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Bill Prince Sent: Tuesday, September 8, 2020 11:16 AM To: AFMUG Subject: [AFMUG] OT: Jay Fuller turns 50 today? A birdie told me that today is Jay Fuller's

Re: [AFMUG] Source for 2x M-TOW-P-24

Yep, we ordered end of June and they have just shipped. I would like to but direct. Sick of waiting months for M-TOW stuff. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Josh Luthman Sent: Friday, October 9, 2020 11:15 AM To: AnimalFarm Microwave Users Group Subject:

Re: [AFMUG] Backup Solutions

We use Veeam backing up to a Synology NAS. I like the air gap idea using Tik ports... -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Nate Burke Sent: Friday, October 9, 2020 1:05 PM To: Animal Farm Subject: [AFMUG] Backup Solutions Hearing more and more

[AFMUG] Lithium lead acid replacement batteries

Is anyone using Lithium replacements for lead acid it there UPS setups. Our standard setup is 4 12v 100 amp hour external batteries on APC or Alpha UPSs. I read that some of the LiFePO4 12v Lithium batteries are drop in replacements for lead acid. Are all with built in BMUs considered drop in?

Re: [AFMUG] POE-24iR-CI discontinued?

We use these. Just about to order more, unhappy to hear they have been discontinued!!! So, yes what do people use with 450b High Gain.. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ken Hohhof Sent: Monday, June 29, 2020 1:18 PM To: 'AnimalFarm Microwave Users Group'

Re: [AFMUG] TVWS feasibility

Radwin are supposed to have a new TVWS product in Beta testing. -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of D. Bernardi Sent: Tuesday, June 16, 2020 11:01 AM To: af@af.afmug.com Subject: [AFMUG] TVWS feasibility Howdy folks, I'm looking into solutions to

Re: [AFMUG] Aviat vs Bridgewave 11GHz

We are running the Navigators in 18Ghz with sub-carriers. Restricted to 512QAM in current firmware. We are getting just over 2Gbps. Adam From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Jason McKemie Sent: Wednesday, June 3, 2020 8:27 AM To: AnimalFarm Microwave Users Group

  1   2   >