Re: [AFMUG] MTOW clamps

[chuck]

In the beginning they were called TOW-M  but someone reversed it somewhere and 
it stuck.  

From: Bill Prince 
Sent: Thursday, April 19, 2018 2:01 PM
To: Motorola III 
Subject: Re: [AFMUG] MTOW clamps

I thought it was mcown tower. 

;-)


--

bp

part15sbs{at}gmail{dot}com


On Thu, Apr 19, 2018 at 12:57 PM, <ch...@wbmfg.com> wrote:

  Our angle mounts also have the V notch that rests against the angle iron.  

  From: Adam Moffett 
  Sent: Thursday, April 19, 2018 1:47 PM
  To: af@afmug.com 
  Subject: Re: [AFMUG] MTOW clamps

  Other way around.  Angled tower leg, he's backing the angle with a piece of 
pipe so he can't crush the angle.  Using your bent clamp on the back so it goes 
against the pipe and the site pro piece on the front because it has a V-notch 
that will rest in the angle iron.


  -- Original Message --
  From: ch...@wbmfg.com
  To: af@afmug.com
  Sent: 4/19/2018 3:41:24 PM
  Subject: Re: [AFMUG] MTOW clamps

So you are adding an piece of angle iron to a round tower leg?
I presume y’all know about these:

https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/

From: Steve Jones 
Sent: Thursday, April 19, 2018 1:37 PM
To: af@afmug.com 
Subject: Re: [AFMUG] MTOW clamps





On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

  The M-TOW-P-48 is not an angle iron part.  If that is what you ordered 
that is not what got shipped.

  -Original Message- From: Seth Mattinen
  Sent: Wednesday, April 18, 2018 8:24 PM
  To: af@afmug.com
      Subject: Re: [AFMUG] MTOW clamps


  On 4/18/18 7:16 PM, Chuck McCown wrote:

The M-TOW products that are made for angle iron tower legs have a flat 
back clamp.  But the others are still the curved clamp.  We could have had a 
packing error in final assembly I suppose.



  Oh, then I got the wrong one, I've never seen the angle iron tower ones.
  Ordered from Streakwave. M-TOW-P-48 

Re: [AFMUG] MTOW clamps

[Bill Prince]

I thought it was mcown tower.

;-)

--
bp
part15sbs{at}gmail{dot}com

On Thu, Apr 19, 2018 at 12:57 PM, <ch...@wbmfg.com> wrote:

> Our angle mounts also have the V notch that rests against the angle iron.
>
> *From:* Adam Moffett
> *Sent:* Thursday, April 19, 2018 1:47 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] MTOW clamps
>
> Other way around.  Angled tower leg, he's backing the angle with a piece
> of pipe so he can't crush the angle.  Using your bent clamp on the back so
> it goes against the pipe and the site pro piece on the front because it has
> a V-notch that will rest in the angle iron.
>
>
> -- Original Message --
> From: ch...@wbmfg.com
> To: af@afmug.com
> Sent: 4/19/2018 3:41:24 PM
> Subject: Re: [AFMUG] MTOW clamps
>
>
> So you are adding an piece of angle iron to a round tower leg?
> I presume y’all know about these:
> https://www.mccowntech.com/product-category/tower-mounts-
> accessories/angle-iron-tower-leg-mounting-accessories/
>
> *From:* Steve Jones
> *Sent:* Thursday, April 19, 2018 1:37 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] MTOW clamps
>
>
>
>
> On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
>
>> The M-TOW-P-48 is not an angle iron part.  If that is what you ordered
>> that is not what got shipped.
>>
>> -Original Message- From: Seth Mattinen
>> Sent: Wednesday, April 18, 2018 8:24 PM
>> To: af@afmug.com
>> Subject: Re: [AFMUG] MTOW clamps
>>
>> On 4/18/18 7:16 PM, Chuck McCown wrote:
>>
>>> The M-TOW products that are made for angle iron tower legs have a flat
>>> back clamp.  But the others are still the curved clamp.  We could have had
>>> a packing error in final assembly I suppose.
>>>
>>
>>
>> Oh, then I got the wrong one, I've never seen the angle iron tower ones.
>> Ordered from Streakwave. M-TOW-P-48
>>
>
>
>

Re: [AFMUG] MTOW clamps

[chuck]

Our angle mounts also have the V notch that rests against the angle iron.  

From: Adam Moffett 
Sent: Thursday, April 19, 2018 1:47 PM
To: af@afmug.com 
Subject: Re: [AFMUG] MTOW clamps

Other way around.  Angled tower leg, he's backing the angle with a piece of 
pipe so he can't crush the angle.  Using your bent clamp on the back so it goes 
against the pipe and the site pro piece on the front because it has a V-notch 
that will rest in the angle iron.


-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 4/19/2018 3:41:24 PM
Subject: Re: [AFMUG] MTOW clamps

  So you are adding an piece of angle iron to a round tower leg?
  I presume y’all know about these:
  
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/

  From: Steve Jones 
  Sent: Thursday, April 19, 2018 1:37 PM
  To: af@afmug.com 
  Subject: Re: [AFMUG] MTOW clamps





  On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

The M-TOW-P-48 is not an angle iron part.  If that is what you ordered that 
is not what got shipped.

-Original Message- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps


On 4/18/18 7:16 PM, Chuck McCown wrote:

  The M-TOW products that are made for angle iron tower legs have a flat 
back clamp.  But the others are still the curved clamp.  We could have had a 
packing error in final assembly I suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower ones.
Ordered from Streakwave. M-TOW-P-48 

Re: [AFMUG] MTOW clamps

[chuck]

Mount Tower

-Original Message- 
From: Jay Weekley

Sent: Thursday, April 19, 2018 1:46 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps

What does MTOW stand for anyway?

ch...@wbmfg.com wrote:

So you are adding an piece of angle iron to a round tower leg?
I presume y’all know about these:
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/
*From:* Steve Jones
*Sent:* Thursday, April 19, 2018 1:37 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] MTOW clamps


On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

The M-TOW-P-48 is not an angle iron part.  If that is what you
ordered that is not what got shipped.

-Original Message- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps

On 4/18/18 7:16 PM, Chuck McCown wrote:

The M-TOW products that are made for angle iron tower legs
have a flat back clamp.  But the others are still the curved
clamp.  We could have had a packing error in final assembly I
suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower
ones.
Ordered from Streakwave. M-TOW-P-48


<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> 
Virus-free. www.avg.com 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Re: [AFMUG] MTOW clamps

[Steve Jones]

yes, the only gain in using the upc is you can adjust rod length to tilt a
mast to plumb left to right
take into account i rarely mount to tower legs, i mount to old grain legs,
the angle iron upright is rarely plumb
plus MTOW costs alot more, otherwise all i would use is MTOW, i dont have
trust in UPC so i limit the load more than i would with mtow

On Thu, Apr 19, 2018 at 2:46 PM, <ch...@wbmfg.com> wrote:

> OK, so again, you do realize I have a whole product line for angle iron,
> right?
>
> *From:* Steve Jones
> *Sent:* Thursday, April 19, 2018 1:43 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] MTOW clamps
>
> no, this is for mounting to angle iron. I put a pipe inside for clamp grip
>
> On Thu, Apr 19, 2018 at 2:41 PM, <ch...@wbmfg.com> wrote:
>
>> So you are adding an piece of angle iron to a round tower leg?
>> I presume y’all know about these:
>> https://www.mccowntech.com/product-category/tower-mounts-acc
>> essories/angle-iron-tower-leg-mounting-accessories/
>>
>> *From:* Steve Jones
>> *Sent:* Thursday, April 19, 2018 1:37 PM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] MTOW clamps
>>
>>
>>
>>
>> On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
>>
>>> The M-TOW-P-48 is not an angle iron part.  If that is what you ordered
>>> that is not what got shipped.
>>>
>>> -Original Message- From: Seth Mattinen
>>> Sent: Wednesday, April 18, 2018 8:24 PM
>>> To: af@afmug.com
>>> Subject: Re: [AFMUG] MTOW clamps
>>>
>>> On 4/18/18 7:16 PM, Chuck McCown wrote:
>>>
>>>> The M-TOW products that are made for angle iron tower legs have a flat
>>>> back clamp.  But the others are still the curved clamp.  We could have had
>>>> a packing error in final assembly I suppose.
>>>>
>>>
>>>
>>> Oh, then I got the wrong one, I've never seen the angle iron tower ones.
>>> Ordered from Streakwave. M-TOW-P-48
>>>
>>
>>
>
>

Re: [AFMUG] MTOW clamps

[Mathew Howard]

But those appear to be backwards for what Steve is doing...

On Thu, Apr 19, 2018 at 2:46 PM, <ch...@wbmfg.com> wrote:

> OK, so again, you do realize I have a whole product line for angle iron,
> right?
>
> *From:* Steve Jones
> *Sent:* Thursday, April 19, 2018 1:43 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] MTOW clamps
>
> no, this is for mounting to angle iron. I put a pipe inside for clamp grip
>
> On Thu, Apr 19, 2018 at 2:41 PM, <ch...@wbmfg.com> wrote:
>
>> So you are adding an piece of angle iron to a round tower leg?
>> I presume y’all know about these:
>> https://www.mccowntech.com/product-category/tower-mounts-acc
>> essories/angle-iron-tower-leg-mounting-accessories/
>>
>> *From:* Steve Jones
>> *Sent:* Thursday, April 19, 2018 1:37 PM
>> *To:* af@afmug.com
>> *Subject:* Re: [AFMUG] MTOW clamps
>>
>>
>>
>>
>> On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
>>
>>> The M-TOW-P-48 is not an angle iron part.  If that is what you ordered
>>> that is not what got shipped.
>>>
>>> -Original Message- From: Seth Mattinen
>>> Sent: Wednesday, April 18, 2018 8:24 PM
>>> To: af@afmug.com
>>> Subject: Re: [AFMUG] MTOW clamps
>>>
>>> On 4/18/18 7:16 PM, Chuck McCown wrote:
>>>
>>>> The M-TOW products that are made for angle iron tower legs have a flat
>>>> back clamp.  But the others are still the curved clamp.  We could have had
>>>> a packing error in final assembly I suppose.
>>>>
>>>
>>>
>>> Oh, then I got the wrong one, I've never seen the angle iron tower ones.
>>> Ordered from Streakwave. M-TOW-P-48
>>>
>>
>>
>
>

Re: [AFMUG] MTOW clamps

[Adam Moffett]

Other way around.  Angled tower leg, he's backing the angle with a piece 
of pipe so he can't crush the angle.  Using your bent clamp on the back 
so it goes against the pipe and the site pro piece on the front because 
it has a V-notch that will rest in the angle iron.



-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 4/19/2018 3:41:24 PM
Subject: Re: [AFMUG] MTOW clamps


So you are adding an piece of angle iron to a round tower leg?
I presume y’all know about these:
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/

From:Steve Jones
Sent: Thursday, April 19, 2018 1:37 PM
To:af@afmug.com
Subject: Re: [AFMUG] MTOW clamps




On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
The M-TOW-P-48 is not an angle iron part.  If that is what you ordered 
that is not what got shipped.


-Original Message- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps

On 4/18/18 7:16 PM, Chuck McCown wrote:
The M-TOW products that are made for angle iron tower legs have a 
flat back clamp.  But the others are still the curved clamp.  We 
could have had a packing error in final assembly I suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower 
ones.

Ordered from Streakwave. M-TOW-P-48

Re: [AFMUG] MTOW clamps

[Jay Weekley]

What does MTOW stand for anyway?

ch...@wbmfg.com wrote:

So you are adding an piece of angle iron to a round tower leg?
I presume y’all know about these:
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/
*From:* Steve Jones
*Sent:* Thursday, April 19, 2018 1:37 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] MTOW clamps


On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

The M-TOW-P-48 is not an angle iron part.  If that is what you
ordered that is not what got shipped.

-Original Message- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps

On 4/18/18 7:16 PM, Chuck McCown wrote:

The M-TOW products that are made for angle iron tower legs
have a flat back clamp.  But the others are still the curved
clamp.  We could have had a packing error in final assembly I
suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower
ones.
Ordered from Streakwave. M-TOW-P-48


<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> 
	Virus-free. www.avg.com 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient> 



<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Re: [AFMUG] MTOW clamps

[chuck]

OK, so again, you do realize I have a whole product line for angle iron, right?

From: Steve Jones 
Sent: Thursday, April 19, 2018 1:43 PM
To: af@afmug.com 
Subject: Re: [AFMUG] MTOW clamps

no, this is for mounting to angle iron. I put a pipe inside for clamp grip

On Thu, Apr 19, 2018 at 2:41 PM, <ch...@wbmfg.com> wrote:

  So you are adding an piece of angle iron to a round tower leg?
  I presume y’all know about these:
  
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/

  From: Steve Jones 
  Sent: Thursday, April 19, 2018 1:37 PM
  To: af@afmug.com 
  Subject: Re: [AFMUG] MTOW clamps





  On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

The M-TOW-P-48 is not an angle iron part.  If that is what you ordered that 
is not what got shipped.

-Original Message- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
    Subject: Re: [AFMUG] MTOW clamps


On 4/18/18 7:16 PM, Chuck McCown wrote:

  The M-TOW products that are made for angle iron tower legs have a flat 
back clamp.  But the others are still the curved clamp.  We could have had a 
packing error in final assembly I suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower ones.
Ordered from Streakwave. M-TOW-P-48 

Re: [AFMUG] MTOW clamps

[Steve Jones]

no, this is for mounting to angle iron. I put a pipe inside for clamp grip

On Thu, Apr 19, 2018 at 2:41 PM, <ch...@wbmfg.com> wrote:

> So you are adding an piece of angle iron to a round tower leg?
> I presume y’all know about these:
> https://www.mccowntech.com/product-category/tower-mounts-
> accessories/angle-iron-tower-leg-mounting-accessories/
>
> *From:* Steve Jones
> *Sent:* Thursday, April 19, 2018 1:37 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] MTOW clamps
>
>
>
>
> On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
>
>> The M-TOW-P-48 is not an angle iron part.  If that is what you ordered
>> that is not what got shipped.
>>
>> -Original Message- From: Seth Mattinen
>> Sent: Wednesday, April 18, 2018 8:24 PM
>> To: af@afmug.com
>> Subject: Re: [AFMUG] MTOW clamps
>>
>> On 4/18/18 7:16 PM, Chuck McCown wrote:
>>
>>> The M-TOW products that are made for angle iron tower legs have a flat
>>> back clamp.  But the others are still the curved clamp.  We could have had
>>> a packing error in final assembly I suppose.
>>>
>>
>>
>> Oh, then I got the wrong one, I've never seen the angle iron tower ones.
>> Ordered from Streakwave. M-TOW-P-48
>>
>
>

Re: [AFMUG] MTOW clamps

[Steve Jones]

I can be contracted for any of your technical drawing needs
and yes, thats what that is when i can get the mtows, otherwise i just use
the upc1. I prefer mtow

On Thu, Apr 19, 2018 at 2:40 PM, Adam Moffett <dmmoff...@gmail.com> wrote:

> Quality CAD work there :)
>
> Are you adapting the standard MTOW for angle iron by using the site pro
> clamps because they have that V-notch in them?
>
>
> -- Original Message --
> From: "Steve Jones" <thatoneguyst...@gmail.com>
> To: af@afmug.com
> Sent: 4/19/2018 3:37:54 PM
> Subject: Re: [AFMUG] MTOW clamps
>
>
>
>
> On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
>
>> The M-TOW-P-48 is not an angle iron part.  If that is what you ordered
>> that is not what got shipped.
>>
>> -Original Message----- From: Seth Mattinen
>> Sent: Wednesday, April 18, 2018 8:24 PM
>> To: af@afmug.com
>> Subject: Re: [AFMUG] MTOW clamps
>>
>> On 4/18/18 7:16 PM, Chuck McCown wrote:
>>
>>> The M-TOW products that are made for angle iron tower legs have a flat
>>> back clamp.  But the others are still the curved clamp.  We could have had
>>> a packing error in final assembly I suppose.
>>>
>>
>>
>> Oh, then I got the wrong one, I've never seen the angle iron tower ones.
>> Ordered from Streakwave. M-TOW-P-48
>>
>
>

Re: [AFMUG] MTOW clamps

[chuck]

So you are adding an piece of angle iron to a round tower leg?
I presume y’all know about these:
https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/

From: Steve Jones 
Sent: Thursday, April 19, 2018 1:37 PM
To: af@afmug.com 
Subject: Re: [AFMUG] MTOW clamps





On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

  The M-TOW-P-48 is not an angle iron part.  If that is what you ordered that 
is not what got shipped.

  -Original Message- From: Seth Mattinen
  Sent: Wednesday, April 18, 2018 8:24 PM
  To: af@afmug.com
  Subject: Re: [AFMUG] MTOW clamps


  On 4/18/18 7:16 PM, Chuck McCown wrote:

The M-TOW products that are made for angle iron tower legs have a flat back 
clamp.  But the others are still the curved clamp.  We could have had a packing 
error in final assembly I suppose.



  Oh, then I got the wrong one, I've never seen the angle iron tower ones.
  Ordered from Streakwave. M-TOW-P-48 

Re: [AFMUG] MTOW clamps

[Seth Mattinen]

On 4/19/18 12:37 PM, Steve Jones wrote:




On Thu, Apr 19, 2018 at 9:54 AM, > wrote:


The M-TOW-P-48 is not an angle iron part.  If that is what you
ordered that is not what got shipped.





Yeah that's what I got, I just thought it was a new bracket type. So 
then I was sent the wrong thing.

Re: [AFMUG] MTOW clamps

[Adam Moffett]

Quality CAD work there :)

Are you adapting the standard MTOW for angle iron by using the site pro 
clamps because they have that V-notch in them?



-- Original Message --
From: "Steve Jones" <thatoneguyst...@gmail.com>
To: af@afmug.com
Sent: 4/19/2018 3:37:54 PM
Subject: Re: [AFMUG] MTOW clamps





On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:
The M-TOW-P-48 is not an angle iron part.  If that is what you ordered 
that is not what got shipped.


-Original Message- From: Seth Mattinen
Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps

On 4/18/18 7:16 PM, Chuck McCown wrote:
The M-TOW products that are made for angle iron tower legs have a 
flat back clamp.  But the others are still the curved clamp.  We 
could have had a packing error in final assembly I suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower 
ones.

Ordered from Streakwave. M-TOW-P-48

Re: [AFMUG] MTOW clamps

[Steve Jones]

On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote:

> The M-TOW-P-48 is not an angle iron part.  If that is what you ordered
> that is not what got shipped.
>
> -Original Message- From: Seth Mattinen
> Sent: Wednesday, April 18, 2018 8:24 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] MTOW clamps
>
> On 4/18/18 7:16 PM, Chuck McCown wrote:
>
>> The M-TOW products that are made for angle iron tower legs have a flat
>> back clamp.  But the others are still the curved clamp.  We could have had
>> a packing error in final assembly I suppose.
>>
>
>
> Oh, then I got the wrong one, I've never seen the angle iron tower ones.
> Ordered from Streakwave. M-TOW-P-48
>

Re: [AFMUG] MTOW clamps

[chuck]

The M-TOW-P-48 is not an angle iron part.  If that is what you ordered that 
is not what got shipped.


-Original Message- 
From: Seth Mattinen

Sent: Wednesday, April 18, 2018 8:24 PM
To: af@afmug.com
Subject: Re: [AFMUG] MTOW clamps

On 4/18/18 7:16 PM, Chuck McCown wrote:
The M-TOW products that are made for angle iron tower legs have a flat 
back clamp.  But the others are still the curved clamp.  We could have had 
a packing error in final assembly I suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower ones.
Ordered from Streakwave. M-TOW-P-48 

Re: [AFMUG] MTOW clamps

[chuck]

Not sure how  you use these.  As a back clamp?

From: Steve Jones 
Sent: Wednesday, April 18, 2018 8:53 PM
To: af@afmug.com 
Subject: Re: [AFMUG] MTOW clamps

upc1 clamps from site pro work great in conjunction with MTOW btw, throw away 
the threaded rod to storage and use the clamp plate for 90s

On Wed, Apr 18, 2018 at 9:50 PM, Chuck McCown <ch...@wbmfg.com> wrote:

  Angle iron units have the word angle in the part number. Perhaps they 
mis-shipped.

  Sent from my iPhone


  > On Apr 18, 2018, at 8:24 PM, Seth Mattinen <se...@rollernet.us> wrote:
  > 
  >> On 4/18/18 7:16 PM, Chuck McCown wrote:
  >> The M-TOW products that are made for angle iron tower legs have a flat 
back clamp.  But the others are still the curved clamp.  We could have had a 
packing error in final assembly I suppose.
  > 
  > 
  > Oh, then I got the wrong one, I've never seen the angle iron tower ones. 
Ordered from Streakwave. M-TOW-P-48

Re: [AFMUG] MTOW clamps

[Steve Jones]

upc1 clamps from site pro work great in conjunction with MTOW btw, throw
away the threaded rod to storage and use the clamp plate for 90s

On Wed, Apr 18, 2018 at 9:50 PM, Chuck McCown  wrote:

> Angle iron units have the word angle in the part number. Perhaps they
> mis-shipped.
>
> Sent from my iPhone
>
> > On Apr 18, 2018, at 8:24 PM, Seth Mattinen  wrote:
> >
> >> On 4/18/18 7:16 PM, Chuck McCown wrote:
> >> The M-TOW products that are made for angle iron tower legs have a flat
> back clamp.  But the others are still the curved clamp.  We could have had
> a packing error in final assembly I suppose.
> >
> >
> > Oh, then I got the wrong one, I've never seen the angle iron tower ones.
> Ordered from Streakwave. M-TOW-P-48
>

Re: [AFMUG] MTOW clamps

[Chuck McCown]

Angle iron units have the word angle in the part number. Perhaps they 
mis-shipped.

Sent from my iPhone

> On Apr 18, 2018, at 8:24 PM, Seth Mattinen  wrote:
> 
>> On 4/18/18 7:16 PM, Chuck McCown wrote:
>> The M-TOW products that are made for angle iron tower legs have a flat back 
>> clamp.  But the others are still the curved clamp.  We could have had a 
>> packing error in final assembly I suppose.
> 
> 
> Oh, then I got the wrong one, I've never seen the angle iron tower ones. 
> Ordered from Streakwave. M-TOW-P-48

Re: [AFMUG] MTOW clamps

[Seth Mattinen]

On 4/18/18 7:16 PM, Chuck McCown wrote:
The M-TOW products that are made for angle iron tower legs have a flat 
back clamp.  But the others are still the curved clamp.  We could have 
had a packing error in final assembly I suppose.



Oh, then I got the wrong one, I've never seen the angle iron tower ones. 
Ordered from Streakwave. M-TOW-P-48

Re: [AFMUG] MTOW clamps

[Chuck McCown]

Shoot me an address and we will get a replacement headed your way.  

-Original Message- 
From: Seth Mattinen 
Sent: Wednesday, April 18, 2018 6:51 PM 
To: af@afmug.com 
Subject: [AFMUG] MTOW clamps 

When did the MTOW start using flat plate clamps instead of the curvy 
ones? I liked the curvy ones. I guess the flat plates are cheaper?

Re: [AFMUG] MTOW clamps

[Chuck McCown]

The M-TOW products that are made for angle iron tower legs have a flat back 
clamp.  But the others are still the curved clamp.  We could have had a 
packing error in final assembly I suppose.


-Original Message- 
From: Seth Mattinen

Sent: Wednesday, April 18, 2018 6:51 PM
To: af@afmug.com
Subject: [AFMUG] MTOW clamps

When did the MTOW start using flat plate clamps instead of the curvy
ones? I liked the curvy ones. I guess the flat plates are cheaper? 

Re: [AFMUG] MTOW clamps

[Chuck McCown]

Huh?

Sent from my iPhone

> On Apr 18, 2018, at 6:51 PM, Seth Mattinen  wrote:
> 
> When did the MTOW start using flat plate clamps instead of the curvy ones? I 
> liked the curvy ones. I guess the flat plates are cheaper?