ction.
I would provide a link but every one I found is cluttered with ads. Better just
to download it and read the manual.
Original Message
From: bkpsusmi...@gmail.com
Sent: March 20, 2021 6:51 AM
To: alan01...@gmail.com
Cc: alsa-user@lists.sourceforge.net
Subject: Re: [Alsa-user] Plea
If you want a more pushbutton solution you could call your script from
Whiptail or Dialog if that's not available. Writing a real GUI
program takes a lot of work but Whiptail can be used from a console or
from X, it's designed to be easy. It's what Rasp-config is written
in. It's designed for s
On 20/03/2021, Susmita/Rajib wrote:
> On 20/03/2021, Alan Corey wrote:
... ... [snipped] ... ... [snipped]
... ...
>> take an input connection and attach an output to it. Try man alsaloop
>> or maybe aconnectgui. And see
>> https://www.al
On 20/03/2021, Alan Corey wrote:
> ... ... [snipped] ... ... [snipped]
> ... ... "duplex"
> isn't a term often heard here ... ... [snipped] ...
> ... [snipped] ... ... You want to "moni
I'd be surprised if there's a driver for a specific card, and "duplex"
isn't a term often heard here. I know what you mean I think from ham
radio. You want to "monitor" a recording connection I think. You can
take an input connection and attach an output to it. Try man alsaloop
or maybe aconnec
https://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg33005.html
___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
Good morning, my illustrious List Members and Administrators, at
alsa-user at lists.sourceforge.net
I have been at this problem for nearly a year without any solution.
I want to have duplex operation for my sound card by Realtek, as
mentioned by Lenovo portal, here:
https://pcsupport.lenovo.com/i
Dont need to care about this quesiton. I tried test it like, open driver 4
times and each driver call kcontrol functions.
And then i can see the description mean. Thanks for all.
2019. 1. 7. 오후 12:12, 박진수 작성:
> I already read the alsa documents. And in there alsa high level control
> interf
I already read the alsa documents. And in there alsa high level control
interface reduce overhead accessing the real controls in kernel driver.
Could u explain about this with some examples?
When I just compare ctl vs hctl, ctl is more faster than hctl. And use less
memory. I dont know what is
alsa-info.sh:
http://www.alsa-project.org/db/?f=4a749054c500a798742695a2f49587989d2f7ecd
Dear Alsa-User List,
I am unable to make the internal speakers work under Linux since many kernel
revisions.
Before it was working fine. And the hardware is fine as under Windows it is
still working fine.
HI all,
I have lenovo 3000 N100 0768HCQ machine and new to linux. I have installed
fedora 14 but there's no sound at all. All was fine with windows. I have
tried all the possible solutions from various forums but no success at all.
My alsa profile is at-
http://www.alsa-project.org/db/?f=cda0d26e49
hi there ppl
i got a analogue wintv go with fm card (i think). It has radio for sure, 1x
composite-in, audio
out, and an IR. I run ubuntu hardy 64bit system. tvtime xawtv etc work without
a problem, only i
can't adjust the volume from within the applications. I have atm the line out
of my tv car
Hi all,
On my currentl ARM platform,
I've been using the /dev/dsp and /dev/mixer to control and play audio ( and
these are the only devices available).
I decided to switch to the libasound using ALSA but I don't know which device
to use.
The kernel driver clearly shows it is ALSA based (proc/as
Please, help with this JACK crappy noise!
De: Marcos Guglielmetti <[EMAIL PROTECTED]> (www.musix.org.ar)
Para: A list for linux audio users <[EMAIL PROTECTED]>
Fecha: 01/07/06 16:23
Hi,
Many Musix's users have this problem: in a moment, JACK's apps begins
to make some continuous
Lonnie Princehouse wrote:
> I desperately need help getting external MIDI to work!
>
> I built the ALSA driver according to the INSTALL docs for my chipset (nVidia
> nforce2), using ./configure --with-cards=intel8x0 --with-sequencer=yes.
Use "--with-cards=intel8x0,mpu401", and load the snd-mpu401
Sorry for the newbie help request =)
I desperately need help getting external MIDI to work!
I built the ALSA driver according to the INSTALL docs for my chipset (nVidia
nforce2), using ./configure --with-cards=intel8x0 --with-sequencer=yes.
Sound works great, but amidi -l yields no MIDI device
Günther Montag wrote:
> From what ALSA version on is amidi there? I have 0.9.7.
0.9.7 is quite old. amidi was added in 1.0.0pre1.
(You could try to compile and install the alsa-utils-1.0.1 package
manually.)
> With ALSA 0.9.7, card Via 82C686 there is no midi found.
> Windoof finds midi device a
Günther Montag wrote:
> I got jazz running with timidity started as server in background.
> I aconnected jazz to timidity with
> aconnect 128:0 129:0.
> jazz plays midi files fine.
> When I click on the piano keys in the piano window it sounds.
> I want to play with my MIDI keyboard.
> Module is th
Hey!
I got jazz running with timidity started as server in background.
I aconnected jazz to timidity with
aconnect 128:0 129:0.
jazz plays midi files fine.
When I click on the piano keys in the piano window it sounds.
I want to play with my MIDI keyboard.
Module is there, in aconnect -lo i see it w
Lo all sorry for the dup I wasn't sure I used the
right subject so I re-upped it
I've been trying unsuccessfully to get my sound up
and running for the last 2 days now. I've tried
every possible combination of oss and alsa possible
googling and reading docs for hours and even
received help from a
Carlo Wood wrote:
> I downloaded alsa-driver-0.9.5.tar.bz2
>
> Then I did:
>
> tar -xjf alsa-driver*.tar.bz2
> cd alsa-driver-*
> ./configure --with-isapnp=no --with-cards=emu10k1 --with-sequencer=yes
> make
> sudo make install
>
> which was succesful.
>
> Finally, I try to load the modules but get
I downloaded alsa-driver-0.9.5.tar.bz2
Then I did:
tar -xjf alsa-driver*.tar.bz2
cd alsa-driver-*
./configure --with-isapnp=no --with-cards=emu10k1 --with-sequencer=yes
make
sudo make install
sudo chmod 666 /dev/dsp* /dev/mixer* /dev/sequencer* /dev/midi*
cd ..
which was succesful.
Finally, I
How do I
u n s u b s c r i b e?
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http:/
Sorry for bothering again but I think I've sent my previous mail to
the wrong adress...
So here's my problem :
I've compiled and installed alsa driver 0.9.0rc5 without problem
I'm using an Edirol UM1-S midi interface
- when I try to use a midisequencer application (Jazz++ or Muse) I
get midiout
I have debian woody installed. the kernel driver
for my VIA ac97 sound chip (via82cxxx_audio) doe snot work
properly.
I have tried to install ALSA, I did an apt-get
install for alsa-base, alsa-utils, alsa-headers, alsa-source, and I got
alsa-modules-2.4.18-686. however, I get "failure: mod
Every time I try to play a surround encoded file
using the AC3 pass-thru in Xine and MPlayer my system freezes. Any suggestions
or thoughts would be appreciated.
Hardware:
P3 450Mhz on an Intel BX chipset
256 MB Ram
SBLive Model CT 4780 using a hoontech SB-DB III for
optical out
NVidia Gefo
On Wednesday 11 September 2002 01:52 pm, Daniel Alonso Gázquez
wrote:
> Hi,
>
> I recently have upgraded my SB Vibra16x to a C-Media Sound
> Expert and have also upgraded from OSS/Free to Alsa.
>
> Unfortunately at the moment, I'm writing this mail with no
> sound enabled because as soon as I 'mod
Hi,
I recently have upgraded my SB Vibra16x to a C-Media Sound Expert and
have also upgraded from OSS/Free to Alsa.
Unfortunately at the moment, I'm writing this mail with no sound enabled
because as soon as I 'modprobe snd-cmipci', my machine turns into a hell
of inestability and runs for a r
* ardient <[EMAIL PROTECTED]> [Aug 01 02 06:58]:
>
> > OK, but you won't have "3 stereo channels in PCM Out 1 - PCM Out 3".
> > PCM 1 can only contain one (mono) signal. Likewise for PCM 2, 3, ...
> >
>
> I use envy24control program.There are "left" and "right" slidebars for each
> PCM. This i
On Thu, Aug 01, 2002 at 03:55:34PM +0400, ardient wrote:
>
> > OK, but you won't have "3 stereo channels in PCM Out 1 - PCM Out 3".
> > PCM 1 can only contain one (mono) signal. Likewise for PCM 2, 3, ...
> >
>
> I use envy24control program.There are "left" and "right" slidebars for each
> PCM
> OK, but you won't have "3 stereo channels in PCM Out 1 - PCM Out 3".
> PCM 1 can only contain one (mono) signal. Likewise for PCM 2, 3, ...
>
I use envy24control program.There are "left" and "right" slidebars for each
PCM. This is why I think that PCM can be stereo.
/*
On even simple soundc
On Tue, Jul 30, 2002 at 02:54:59PM +0100, Adam Wilkinson wrote:
> Single interface taking 6 channels of PCM might be able to be transformed
> into three interfaces each taking 2 channel (stereo) PCM.
OK, but you won't have "3 stereo channels in PCM Out 1 - PCM Out 3".
PCM 1 can only contain one (
Single interface taking 6 channels of PCM might be able to be transformed
into three interfaces each taking 2 channel (stereo) PCM.
-Original Message-
From: Paul Winkler [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 2:31 PM
To: [EMAIL PROTECTED]
Subject: Re: [Alsa-user] please
On Tue, Jul 30, 2002 at 12:36:38PM +0400, ardient wrote:
> and got 6 mono channels in PCM Out 1 - PCM Out 6.
> Do You know how to get 3 stereo channels in PCM Out 1 - PCM Out 3?
Huh? How can you put a stereo signal in one output channel?
By definition, a stereo signal requires two channels.
--
Hi, all.
I have ice1712 card.
In ~/.xine/config I set
audio.five_lfe_channel:1
audio.alsa_surround51_device:plug:surround51
and got 6 mono channels in PCM Out 1 - PCM Out 6.
Do You know how to get 3 stereo channels in PCM Out 1 - PCM Out 3?
There are one more question about PCM output.
Wh
first i tried to install the 0.9.0beta12 version but when i tried the
command
make install
it gave me an error.
/sbin/depmod -a -F /lib/modules/2.4.9-31/build/System.map 2.4.9-31custom
depmod: Can't read /lib/modules/2.4.9-31/build/System.map
make: ***[install-modules] Error 1
eric rz. advised
Hi Inor,
Please try to keep replies like this on the list. If you reply just to
me I might not get a chance to answer for several days. If you reply to
the list then everyone there can help you and you don't have to depend
just on my limited knowledge and time. :)
attempted answers below
I
Inor Kuo wrote:
>
> i am new to linux, and i am using onboard sound via8233 ac97. i have
> redhat 7.2 with kernel updated to version 2.4.9-31. when i try to
> install alsa following the directions from the via website, it gives me
> problems when i try to do modprobe snd-card-via8233.
i am new to linux, and i am using onboard sound via8233 ac97. i have
redhat 7.2 with kernel updated to version 2.4.9-31. when i try to
install alsa following the directions from the via website, it gives me
problems when i try to do modprobe snd-card-via8233. says it can't
locate the module
PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Rett D.
Walters
Sent: Wednesday, March 20, 2002 10:58 AM
To: [EMAIL PROTECTED]
Subject: [Alsa-user] Please Help! ALSA 0.9.0beta12/EMu10k1, XFree 4.1
with Voodoo3 produce System Lockup
Hello All:
Well, since I have posted on this list before a
Hello All:
Well, since I have posted on this list before about other alsa issues and
have not received any responses (I have learned to live with them), I am
hoping this issue will catch someones eye, as this is a show stopper...
I have been having issues with an HomeBuilt system with the follow
On Wed, 19 Dec 2001 13:09:21 + (GMT)
Andrew Scott <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I've made several posts to this list on related
> problems which all seem to have the same source;
> unfortunately I have yet to receive any reply. Please,
> please help if you can; I'd be eternally gra
Hello,
I've made several posts to this list on related
problems which all seem to have the same source;
unfortunately I have yet to receive any reply. Please,
please help if you can; I'd be eternally grateful for
any practical help/suggestions.
I am running SuSe 7.0 on an i686 with a 2.2.16 kern
> Different from OSS driver, ALSA handles multiple channels with a
> single pcm device. For example, you'll be able to play 4 channel
> interleaved WAV file via aplay like this way:
> % aplay -D surround40 foo.wav
I have tried that, it only outputs through the front speakers.
I also tried
i'm using asus-cuv4x motherboard with via chipsets and when i try to run
configure in those driver directory it appears error "kernel version does
not exist, please install full package ...(and else)"
how can i solve this problems? i'm using redhat 7.2 and just a newbie.
thanks
___
45 matches
Mail list logo
