Hi,
Clemens Ladisch schrieb:
> This is the MIDI streaming interface. I guess this will work with the
> original quirk.
It does. I unquirked my usbquirk and have now midi working in advanced
mode. Still no sound then.
ciao
--
Frank Barknecht
Hi Clemens,
Clemens Ladisch schrieb:
> To use PCM audio in "Advanced Driver" mode, I have to add information
> about the supported audio format(s) to usbquirks.h. Please send me the
> output of "lsusb -v" in both modes.
thank you for the quick respnse. Attached are "lsusb -v" outputs for simple
a
Frank Barknecht wrote:
> UA-20 MME driver on Win2000. Here midi works in "Advanced Driver" mode,
> which is recommended by Edirol's README (maybe it is required).
>
> /proc/bus/usb/devices shows this:
> [...]
> P: Vendor=0582 ProdID=0025 Rev= 1.01
> [...]
> I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.)
Hi,
I'm getting more aand more desperate ;(
Clemens Ladisch schrieb:
> I looked at the driver from Edirol's website, and it definitely uses 0025
> as product ID, so the above isn't a typo.
>
> But the picture on the website shows that the UA-20 has an "Advanced
> Driver" switch. I don't know its
Frank Barknecht wrote:
> Clemens Ladisch wrote:
> > Frank Barknecht wrote:
> > > Now I found this in usbquirks.h:
> > > USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
> > > .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
> > > .vendor_name = "EDIROL",
> > > .produc
Hallo,
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> Frank Barknecht wrote:
> > Now I found this in usbquirks.h:
> > USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
> > .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
> > .vendor_name = "EDIROL",
> >
Hallo,
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> However, the USB interface for the MIDI ports should be number 3 (0-2 are
> for the PCM audio part), but your device doesn't have interface #3:
>
> > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0582 Prod
Frank Barknecht wrote:
> Frank Barknecht wrote:
> > /proc/bus/usb/devices:
> > P: Vendor=0582 ProdID=0026 Rev= 1.01
> > S: Manufacturer=Roland
> > S: Product=EDIROL UA-20
>
> Now I found this in usbquirks.h:
> USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
> .driver_info = (unsigned long) &
Hallo Clemens,
Frank Barknecht hat gesagt: // Frank Barknecht wrote:
> /proc/bus/usb/devices:
> P: Vendor=0582 ProdID=0026 Rev= 1.01
> S: Manufacturer=Roland
> S: Product=EDIROL UA-20
Now I found this in usbquirks.h:
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
.driver_info = (unsig
Hallo Clemens,
now here's some more data from home.
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> Does it show up in /proc/asound/cards?
Yes, as:
0 [Edirol ]: USB-Audio - EDIROL UA-20
Roland EDIROL UA-20
(I gave it the id "Edirol" in modules.conf, see below)
> Is sn
Frank Barknecht wrote:
> Clemens Ladisch schrieb:
> > Is usb-midi _not_ loaded?
> This is the kernel-OSS-midi driver, yes?
Yes. To disable that one, add it to /etc/hotplug/blacklist, or recompile
the kernel without usb-midi.
> I'm still runing 0.9rc6 on this laptop. I read in the
> alsa-devel-arc
Hi Clemens,
Clemens Ladisch schrieb:
> Frank Barknecht wrote:
> > somehow I seem not to be able to get Midi working on my Edirol UA-20
> > USB interface. I configured it according to the instructions on
> > www.alsa-project.org/alsa-doc but I can't see or use the midi ports,
> > neither in /proc/as
Frank Barknecht wrote:
> somehow I seem not to be able to get Midi working on my Edirol UA-20
> USB interface. I configured it according to the instructions on
> www.alsa-project.org/alsa-doc but I can't see or use the midi ports,
> neither in /proc/asound/seq/clients not with "aconnect -l[io]". I
Hallo,
somehow I seem not to be able to get Midi working on my Edirol UA-20
USB interface. I configured it according to the instructions on
www.alsa-project.org/alsa-doc but I can't see or use the midi ports,
neither in /proc/asound/seq/clients not with "aconnect -l[io]". I do
see the configured
14 matches
Mail list logo
