Frank Barknecht wrote:
Clemens Ladisch wrote:
Frank Barknecht wrote:
Now I found this in usbquirks.h:
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
.driver_info = (unsigned long) (const snd_usb_audio_quirk_t) {
.vendor_name = EDIROL,
.product_name = UA-20,
Hi,
I'm getting more aand more desperate ;(
Clemens Ladisch schrieb:
I looked at the driver from Edirol's website, and it definitely uses 0025
as product ID, so the above isn't a typo.
But the picture on the website shows that the UA-20 has an Advanced
Driver switch. I don't know its
Frank Barknecht wrote:
UA-20 MME driver on Win2000. Here midi works in Advanced Driver mode,
which is recommended by Edirol's README (maybe it is required).
/proc/bus/usb/devices shows this:
[...]
P: Vendor=0582 ProdID=0025 Rev= 1.01
[...]
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=03
Hi Clemens,
Clemens Ladisch schrieb:
To use PCM audio in Advanced Driver mode, I have to add information
about the supported audio format(s) to usbquirks.h. Please send me the
output of lsusb -v in both modes.
thank you for the quick respnse. Attached are lsusb -v outputs for simple
and
Hi,
Clemens Ladisch schrieb:
This is the MIDI streaming interface. I guess this will work with the
original quirk.
It does. I unquirked my usbquirk and have now midi working in advanced
mode. Still no sound then.
ciao
--
Frank Barknecht
Hi Clemens,
Clemens Ladisch schrieb:
Frank Barknecht wrote:
somehow I seem not to be able to get Midi working on my Edirol UA-20
USB interface. I configured it according to the instructions on
www.alsa-project.org/alsa-doc but I can't see or use the midi ports,
neither in
Frank Barknecht wrote:
Clemens Ladisch schrieb:
Is usb-midi _not_ loaded?
This is the kernel-OSS-midi driver, yes?
Yes. To disable that one, add it to /etc/hotplug/blacklist, or recompile
the kernel without usb-midi.
I'm still runing 0.9rc6 on this laptop. I read in the
Hallo Clemens,
now here's some more data from home.
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
Does it show up in /proc/asound/cards?
Yes, as:
0 [Edirol ]: USB-Audio - EDIROL UA-20
Roland EDIROL UA-20
(I gave it the id Edirol in modules.conf, see below)
Is
Hallo Clemens,
Frank Barknecht hat gesagt: // Frank Barknecht wrote:
/proc/bus/usb/devices:
P: Vendor=0582 ProdID=0026 Rev= 1.01
S: Manufacturer=Roland
S: Product=EDIROL UA-20
Now I found this in usbquirks.h:
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
.driver_info = (unsigned
Frank Barknecht wrote:
Frank Barknecht wrote:
/proc/bus/usb/devices:
P: Vendor=0582 ProdID=0026 Rev= 1.01
S: Manufacturer=Roland
S: Product=EDIROL UA-20
Now I found this in usbquirks.h:
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
.driver_info = (unsigned long) (const
Hallo,
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
Frank Barknecht wrote:
Now I found this in usbquirks.h:
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
.driver_info = (unsigned long) (const snd_usb_audio_quirk_t) {
.vendor_name = EDIROL,
Frank Barknecht wrote:
somehow I seem not to be able to get Midi working on my Edirol UA-20
USB interface. I configured it according to the instructions on
www.alsa-project.org/alsa-doc but I can't see or use the midi ports,
neither in /proc/asound/seq/clients not with aconnect -l[io]. I do
12 matches
Mail list logo